In commit 5a7d202b15, a logical AND was erroneously changed to an OR,
causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for
kabylake and coffeelake, even when IPC is disabled. Fix the logic so
that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled.
Fixes: 5a7d202b15 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl")
Cc: stable@vger.kernel.org # 5.3.x+
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com
All these ROUNDING_FACTORs and whatnot are making this thing hard to
read. Get rid of them. And let's massage some of the fractions to
give us less questionable intermediate results and perhaps less
divisions.
Also looks like a good helping of 64bit math stuff is needed to
avoid some of overflows present in the current code. There
might still be a few overflows, namely when calculating
link_clks_available/samples_room (would require a huge hblank
though), and potentially when calculating hblank_rise (not sure
how large link_clks_active can get).
It looks like we're still not calculating exactly what the spec says
since we truncate tu_data and tu_line early. But I'm too lazy to
figure out if we could avoid that.
v2: Fix typo in commit msg (Uma)
Remove ROUNDING_FACTOR define (Uma)
s/5*link_clk+5*cdclk/5*(link_clk+cdclk)/ (Chris)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Since the code seems insistent on using the variable names from the
bspec formulat, let's be consistent and use those names for all
the things. For some reason 'link_clk' and 'lanes' were left out
in the code until now.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
mode.vrefresh is rounded to the nearest integer. You don't want to use
it anywhere that requires precision. Also I want to nuke it.
vtotal*vrefresh == 1000*clock/htotal, so let's use the latter.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Remove all the stepping dependent cnl workarounds. Bspec lists
more steppings than this so presumably these are classed as
pre-production. And this is cnl after all so no one should
really care anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430125822.21985-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Display WA #1105 says that FBC requires PLANE_STRIDE to be a multiple
of 512 bytes on gen9 and glk.
This is definitely true for glk as certain tests (such as
igt/kms_big_fb/linear-16bpp-rotate-0) are now failing when the
display resolution results in a plane stride which is not a
multiple of 512 bytes.
Curiously I was not able to reproduce this on a KBL. First I
suspected that our use of the FBC override stride explain this,
but after trying to use the override stride on glk the test
still failed. I did try both the old CHICKEN_MISC_4 way and
the new FBC_STRIDE way, neither had any effect on the result.
Anyways, we need this at least on glk. But let's trust the spec
and apply the w/a for all gen9 as well, despite being unable to
reproduce the problem.
v2: s/FBC_CHICKEN/FBC_STRIDE/ in commit msg
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 691f7ba58d ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
That is a preparation patch before next one where we
introduce old_bw_state and a bunch of other changes
as well.
In a review comment it was suggested to split out
at least that renaming into a separate patch, what
is done here.
v2: Removed spurious space
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423075902.21892-8-stanislav.lisovskiy@intel.com
We need to calculate SAGV mask also in a non-modeset
commit, however currently active_pipes are only calculated
for modesets in global atomic state, thus now we will be
tracking those also in bw_state in order to be able to
properly access global data.
v2: - Removed pre/post plane SAGV updates from modeset(Ville)
- Now tracking active pipes in intel_can_enable_sagv(Ville)
v3: - lock global state if active_pipes change as well(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430195634.7666-1-stanislav.lisovskiy@intel.com
Future platforms require per-crtc SAGV evaluation
and serializing global state when those are changed
from different commits.
v2: - Add has_sagv check to intel_crtc_can_enable_sagv
so that it sets bit in reject mask.
- Use bw_state in intel_pre/post_plane_enable_sagv
instead of atomic state
v3: - Fixed rebase conflict, now using
intel_atomic_crtc_state_for_each_plane_state in
order to call it from atomic check
v4: - Use fb modifier from plane state
v5: - Make intel_has_sagv static again(Ville)
- Removed unnecessary NULL assignments(Ville)
- Removed unnecessary SAGV debug(Ville)
- Call intel_compute_sagv_mask only for modesets(Ville)
- Serialize global state only if sagv results change, but
not mask itself(Ville)
v6: - use lock global state instead of serialize(Ville)
v7: - use both global state lock and serialize depending on
if we need to change only global state or access hw
(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430191757.18206-1-stanislav.lisovskiy@intel.com
The older arches did not convert MI_STORE_DATA_IMM to using the GTT, but
left them writing to a physical address. The notes suggest that the
primary reason would be so that the writes were cache coherent, as the
CPU cache uses physical tagging. As such we did not implement the
legacy variant of MI_STORE_DATA_IMM and so left all the relocations
synchronous -- but with a small function to convert from the vma address
into the physical address, we can implement asynchronous relocs on these
older arches, fixing up a few tests that require them.
In order to be able to test the legacy paths, refactor the gpu
relocations so that we can hook them up to a selftest.
v2: Use an array of offsets not enum labels for the selftest
v3: Refactor the common igt_hexdump()
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/757
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504140629.28240-1-chris@chris-wilson.co.uk
It is required that a chained batch be in the same address domain as its
parent, and also that must be specified in the command for earlier gen
as it is not inferred from the chaining until gen6.
Fixes: 964a9b0f61 ("drm/i915/gem: Use chained reloc batches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504125149.4396-1-chris@chris-wilson.co.uk
We only need the device wakeref on freeing the objects if we have to
unbind the object from the global GTT, or otherwise update device
information. If the objects are clean, we never need the wakeref, so
avoid taking until required.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200503171513.18704-1-chris@chris-wilson.co.uk
If at first we don't succeed, try try again.
Not all engines may support the MI ops we need to perform asynchronous
relocation patching, and so we end up falling back to a synchronous
operation that has a liability of blocking. However, Tvrtko pointed out
we don't need to use the same engine to perform the relocations as we
are planning to execute the execbuf on, and so if we switch over to a
working engine, we can perform the relocation asynchronously. The user
execbuf will be queued after the relocations by virtue of fencing.
This patch creates a new context per execbuf requiring asynchronous
relocations on an unusable engines. This is perhaps a bit excessive and
can be ameliorated by a small context cache, but for the moment we only
need it for working around a little used engine on Sandybridge, and only
if relocations are actually required to an active batch buffer.
Now we just need to teach the relocation code to handle physical
addressing for gen2/3, and we should then have universal support!
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Testcase: igt/gem_exec_reloc/basic-spin # snb
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501192945.22215-3-chris@chris-wilson.co.uk
As we can now keep chaining together a relocation batch to process any
number of relocations, we can keep building that relocation batch for
all of the target vma. This avoiding emitting a new request into the
ring for each target, consuming precious ring space and a potential
stall.
v2: Propagate the failure from submitting the relocation batch.
Testcase: igt/gem_exec_reloc/basic-wide-active
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501192945.22215-2-chris@chris-wilson.co.uk
The ring is a precious resource: we anticipate to only use a few hundred
bytes for a request, and only try to reserve that before we start. If we
go beyond our guess in building the request, then instead of waiting at
the start of execbuf before we hold any locks or other resources, we
may trigger a wait inside a critical region. One example is in using gpu
relocations, where currently we emit a new MI_BB_START from the ring
every time we overflow a page of relocation entries. However, instead of
insert the command into the precious ring, we can chain the next page of
relocation entries as MI_BB_START from the end of the previous.
v2: Delay the emit_bb_start until after all the chained vma
synchronisation is complete. Since the buffer pool batches are idle, this
_should_ be a no-op, but one day we may some fancy async GPU bindings
for new vma!
v3: Use pool/batch consitently, once we start thinking in terms of the
batch vma, use batch->obj.
v4: Explain the magic number 4.
Tvrtko spotted that we lose propagation of the error for failing to
submit the relocation request; that's easier to fix up in the next
patch.
Testcase: igt/gem_exec_reloc/basic-many-active
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501192945.22215-1-chris@chris-wilson.co.uk
gdb uses ptrace() to peek and poke bytes of the target's address space.
The driver must implement an vm_ops->access() handler or else gdb will
be unable to inspect the pointer and report it as out-of-bounds.
Worse than useless as it causes immediate suspicion of the valid GTT
pointer, distracting the poor programmer trying to find his bug.
v2: Write-protect readonly objects (Matthew).
Testcase: igt/gem_mmap_gtt/ptrace
Testcase: igt/gem_mmap_offset/ptrace
Suggested-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501145120.18830-1-chris@chris-wilson.co.uk
In order to allow userspace to rely on timeslicing to reorder their
batches, we must support preemption of those user batches. Declare
timeslicing as an explicit property that is a combination of having the
kernel support and HW support.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501122249.12417-1-chris@chris-wilson.co.uk
Since the introduction of 'soft-rc6', we aim to park the device quickly
and that results in frequent idling of the whole device. Currently upon
idling we free the batch buffer pool, and so this renders the cache
ineffective for many workloads. If we want to have an effective cache of
recently allocated buffers available for reuse, we need to decouple that
cache from the engine powermanagement and make it timer based. As there
is no reason then to keep it within the engine (where it once made
retirement order easier to track), we can move it up the hierarchy to the
owner of the memory allocations.
v2: Hook up to debugfs/drop_caches to clear the cache on demand.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430111819.10262-2-chris@chris-wilson.co.uk
Extend coverage of the blitter client by exercising conversion to and
from tiled sources. In the process we perform spot checks to verify that
the tiling/detiling is being applied correctly, along with position
invariance of the tiling parameters.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430064957.14942-1-chris@chris-wilson.co.uk
We reduced the clocks slowly after a boost event based on the
observation that the smoothness of animations suffered. However, since
reducing the evalution intervals, we should be able to respond to the
rapidly fluctuating workload of a simple desktop animation and so
restore the more aggressive downclocking.
References: 2a8862d2f3 ("drm/i915: Reduce the RPS shock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-6-chris@chris-wilson.co.uk
We treat parking as a manual RPS timeout event, and downclock the GPU
for the next unpark and batch execution. However, having restored the
aggressive downclocking and observed that we have very light workloads
whose only interaction is through the manual parking events, carry over
the aggressive downclocking to the fake RPS events.
References: 21abf0bf16 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-5-chris@chris-wilson.co.uk
As with the realisation for soft-rc6, we respond to idling the engines
within microseconds, far faster than the response times for HW RC6 and
RPS. Furthermore, our fast parking upon idle, prevents HW RPS from
running for many desktop workloads, as the RPS evaluation intervals are
on the order of tens of milliseconds, but the typical workload is just a
couple of milliseconds, but yet we still need to determine the best
frequency for user latency versus power.
Recognising that the HW evaluation intervals are a poor fit, and that
they were deprecated [in bspec at least] from gen10, start to wean
ourselves off them and replace the EI with a timer and our accurate
busy-stats. The principle benefit of manually evaluating RPS intervals
is that we can be more responsive for better performance and powersaving
for both spiky workloads and steady-state.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1698
Fixes: 98479ada42 ("drm/i915/gt: Treat idling as a RPS downclock event")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-4-chris@chris-wilson.co.uk
In the near future, we will utilize the busy-stats on each engine to
approximate the C0 cycles of each, and use that as an input to a manual
RPS mechanism. That entails having busy-stats always enabled and so we
can remove the enable/disable routines and simplify the pmu setup. As a
consequence of always having the stats enabled, we can also show the
current active time via sysfs/engine/xcs/active_time_ns.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429205446.3259-1-chris@chris-wilson.co.uk
We need to keep the default context state around to instantiate new
contexts (aka golden rendercontext), and we also keep it pinned while
the engine is active so that we can quickly reset a hanging context.
However, the default contexts are large enough to merit keeping in
swappable memory as opposed to kernel memory, so we store them inside
shmemfs. Currently, we use the normal GEM objects to create the default
context image, but we can throw away all but the shmemfs file.
This greatly simplifies the tricky power management code which wants to
run underneath the normal GT locking, and we definitely do not want to
use any high level objects that may appear to recurse back into the GT.
Though perhaps the primary advantage of the complex GEM object is that
we aggressively cache the mapping, but here we are recreating the
vm_area everytime time we unpark. At the worst, we add a lightweight
cache, but first find a microbenchmark that is impacted.
Having started to create some utility functions to make working with
shmemfs objects easier, we can start putting them to wider use, where
GEM objects are overkill, such as storing persistent error state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429172429.6054-1-chris@chris-wilson.co.uk
If intel_context_create() fails then it leads to an error pointer
dereference. I shuffled things around to make error handling easier.
Fixes: 1dd47b54ba ("drm/i915: Add live selftests for indirect ctx batchbuffers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429132425.GE815283@mwanda
When building with clang + -Wuninitialized:
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:407:7: warning: variable
'rpcurupei' is uninitialized when used here [-Wuninitialized]
rpcurupei,
^~~~~~~~~
drivers/gpu/drm/i915/gt/debugfs_gt_pm.c:304:16: note: initialize the
variable 'rpcurupei' to silence this warning
u32 rpcurupei, rpcurup, rpprevup;
^
= 0
1 warning generated.
rpupei is assigned twice; based on the second argument to
intel_uncore_read, it seems this one should have been assigned to
rpcurupei.
Fixes: 9c878557b1 ("drm/i915/gt: Use the RPM config register to determine clk frequencies")
Link: https://github.com/ClangBuiltLinux/linux/issues/1016
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429030051.920203-1-natechancellor@gmail.com
The presumption is that by using a circular counter that is twice as
large as the maximum ELSP submission, we would never reuse the same CCID
for two inflight contexts.
However, if we continually preempt an active context such that it always
remains inflight, it can be resubmitted with an arbitrary number of
paired contexts. As each of its paired contexts will use a new CCID,
eventually it will wrap and submit two ELSP with the same CCID.
Rather than use a simple circular counter, switch over to a small bitmap
of inflight ids so we can avoid reusing one that is still potentially
active.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-2-chris@chris-wilson.co.uk
The bspec is confusing on the nature of the upper 32bits of the LRC
descriptor. Once upon a time, it said that it uses the upper 32b to
decide if it should perform a lite-restore, and so we must ensure that
each unique context submitted to HW is given a unique CCID [for the
duration of it being on the HW]. Currently, this is achieved by using
a small circular tag, and assigning every context submitted to HW a
new id. However, this tag is being cleared on repinning an inflight
context such that we end up re-using the 0 tag for multiple contexts.
To avoid accidentally clearing the CCID in the upper 32bits of the LRC
descriptor, split the descriptor into two dwords so we can update the
GGTT address separately from the CCID.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-1-chris@chris-wilson.co.uk
The IRQ postinstall handling had open-coded pipe fault mask selection
that never got updated for gen11. Switch it to use
gen8_de_pipe_fault_mask() to ensure we don't miss updates for new
platforms.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: d506a65d56 ("drm/i915: Catch GTT fault errors for gen11+ planes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424231423.4065231-1-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The bspec lists both the clock frequency and the effective interval. The
interval corresponds to observed behaviour, so adjust the frequency to
match.
v2: Mika rightfully asked if we could measure the clock frequency from a
selftest.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427154554.12736-1-chris@chris-wilson.co.uk
We see that if the HW doesn't actually sleep, the HW may eat the poison
we set in its write-only HWSP during sanitize:
intel_gt_resume.part.8: 0000:00:02.0
__gt_unpark: 0000:00:02.0
gt_sanitize: 0000:00:02.0 force:yes
process_csb: 0000:00:02.0 vcs0: cs-irq head=5, tail=90
process_csb: 0000:00:02.0 vcs0: csb[0]: status=0x5a5a5a5a:0x5a5a5a5a
assert_pending_valid: Nothing pending for promotion!
The CS TAIL pointer should have been reset by reset_csb_pointers(), so
in this case it is likely that we have read back from the CPU cache and
so we must clflush our control over that page. In doing so, push the
sanitisation to the start of the GT sequence so that our poisoning is
assuredly before we start talking to the HW.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1794
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427084000.10999-1-chris@chris-wilson.co.uk
We evaluate *active, which is a pointer into execlists->inflight[]
during dequeue to decide how long a preempt-timeout we need to apply.
However, as soon as we do the submit_ports, the HW may send its ACK
interrupt causing us to promote execlists->pending[] tp
execlists->inflight[], overwriting the value of *active. We know *active
is only stable until we submit (as we only submit when there is no
pending promotion).
[ 16.102328] BUG: KCSAN: data-race in execlists_dequeue+0x1449/0x1600 [i915]
[ 16.102356]
[ 16.102375] race at unknown origin, with read to 0xffff8881e9500488 of 8 bytes by task 429 on cpu 1:
[ 16.102780] execlists_dequeue+0x1449/0x1600 [i915]
[ 16.103160] __execlists_submission_tasklet+0x48/0x60 [i915]
[ 16.103540] execlists_submit_request+0x38e/0x3c0 [i915]
[ 16.103940] submit_notify+0x8f/0xc0 [i915]
[ 16.104308] __i915_sw_fence_complete+0x61/0x420 [i915]
[ 16.104683] i915_sw_fence_complete+0x58/0x80 [i915]
[ 16.105054] i915_sw_fence_commit+0x16/0x20 [i915]
[ 16.105457] __i915_request_queue+0x60/0x70 [i915]
[ 16.105843] i915_gem_do_execbuffer+0x2d6b/0x4230 [i915]
[ 16.106227] i915_gem_execbuffer2_ioctl+0x2b0/0x580 [i915]
[ 16.106257] drm_ioctl_kernel+0xe9/0x130
[ 16.106279] drm_ioctl+0x27d/0x45e
[ 16.106311] ksys_ioctl+0x89/0xb0
[ 16.106336] __x64_sys_ioctl+0x42/0x60
[ 16.106370] do_syscall_64+0x6e/0x2c0
[ 16.106397] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200426094231.21995-1-chris@chris-wilson.co.uk
Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption.
v2: add to lrc layout (Chris)
v3: end to a cacheline (Chris)
v4: add to lrc fixed (Chris)
v5: value in offset+1
Testcase: igt/i915_selftest/gt_lrc
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424230632.30333-1-mika.kuoppala@linux.intel.com
Indirect ctx batchbuffers are a hw feature of which
batch can be run, by hardware, during context restoration stage.
Driver can setup a batchbuffer and also an offset into the
context image. When context image is marshalled from
memory to registers, and when the offset from the start of
context register state is equal of what driver pre-determined,
batch will run. So one can manipulate context restoration
process at cacheline granularity, given some limitations,
as you need to have rudimentaries in place before you can
run a batch.
Add selftest which will write the ring start register
to a canary spot. This will test that hardware will run a
batchbuffer for the context in question.
v2: request wait fix, naming (Chris)
v3: test order (Chris)
v4: rebase
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424214841.28076-3-mika.kuoppala@linux.intel.com
Restoration of a previous timestamp can collide
with updating the timestamp, causing a value corruption.
Combat this issue by using indirect ctx bb to
modify the context image during restoring process.
We can preload value into scratch register. From which
we then do the actual write with LRR. LRR is faster and
thus less error prone as probability of race drops.
v2: tidying (Chris)
v3: lrr for all engines
v4: grp
v5: reg bit
v6: wa_bb_offset, virtual engines (Chris)
References: HSDES#16010904313
Testcase: igt/i915_selftest/gt_lrc
Suggested-by: Joseph Koston <joseph.koston@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424230546.30271-1-mika.kuoppala@linux.intel.com
We only hold the active spinlock while dumping the error state, and this
does not prevent another thread from retiring the request -- as it is
quite possible that despite us capturing the current state, the GPU has
completed the request. As such, it is dangerous to dereference state
below the request as it may already be freed, and the simplest way to
avoid the danger is not include it in the error state.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1788
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424191410.27570-1-chris@chris-wilson.co.uk
For many configuration details within RC6 and RPS we are programming
intervals for the internal clocks. From gen11, these clocks are
configuration via the RPM_CONFIG and so for convenience, we would like
to convert to/from more natural units (ns).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424162805.25920-2-chris@chris-wilson.co.uk
Add tracek to the RPS events (interrupts, worker, enabling, threshold
selection, frequency setting), so that if we have to debug reticent HW
we have some traces to start from.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424162805.25920-1-chris@chris-wilson.co.uk
The RPS DOWN_TIMEOUT interrupt is signaled after a period of rc6, and
upon receipt of that interrupt we reprogram the GPU clocks down to the
next idle notch [to help convserve power during rc6]. However, on
execlists, we benefit from soft-rc6 immediately parking the GPU and
setting idle frequencies upon idling [within a jiffie], and here the
interrupt prevents us from restarting from our last frequency.
In the process, we can simply opt for a static pm_events mask and rely
on the enable/disable interrupts to flush the worker on parking.
This will reduce the amount of oscillation observed during steady
workloads with microsleeps, as each time the rc6 timeout occurs we
immediately follow with a waitboost for a dropped frame.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422001703.1697-1-chris@chris-wilson.co.uk
Pass the entire connector state to intel_{gmch,pch}_panel_fitting().
For now we just need to get at .scaling_mode but in the future we'll
want access to the margin properties as well.
v2: Deal with intel_dp_ycbcr420_config()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Make things a bit more abstract by replacing the pch_pfit.pos/size
raw register values with a drm_rect. Makes it slighly more convenient
to eg. compute the scaling factors.
v2: Use drm_rect_init()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Most of the pfit functions are of the form:
func()
{
if (pfit_enabled) {
...
}
}
Flip the pfit_enabled check around to flatten the functions.
And while we're touching all this let's do the usual
s/pipe_config/crtc_state/ replacement.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-2-ville.syrjala@linux.intel.com
Fix skl_update_scaler_crtc() to deal with different scaling
modes correctly. The current implementation assumes
DRM_MODE_SCALE_FULLSCREEN. Fortunately we don't expose any
border properties currently so the code does actually end
up doing the right thing (assigning a scaler for pfit).
The code does need to be fixed before any borders are
exposed.
Also we have redundant calls to skl_update_scaler_crtc() in
dp/hdmi .compute_config() which can be nuked. They were anyway
called before we had even computed the pfit state so were
basically nonsense. The real call we need to keep is in
intel_crtc_atomic_check().
v2: Deal witrh skl_update_scaler_crtc() in intel_dp_ycbcr420_config()
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-1-ville.syrjala@linux.intel.com
The history of i915_vma_close() is confusing, as is its use. As the
lifetime of the i915_vma is currently bounded by the object it is
attached to, we needed a means of identify when a vma was no longer in
use by userspace (via the user's fd). This is further complicated by
that only ppgtt vma should be closed at the user's behest, as the ggtt
were always shared.
Now that we attach the vma to a lut on the user's context, the open
count does indicate how many unique and open context/vm are referencing
this vma from the user. As such, we can and should just use the
open_count to track when the vma is still in use by userspace.
It's a poor man's replacement for reference counting.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1193
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422190558.30509-1-chris@chris-wilson.co.uk
Under ideal circumstances, the driver should be able to keep the GPU
fully saturated with work. Measure how close to ideal we get under the
harshest of conditions with no user payload.
v2: Also measure throughput using only one thread.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422074203.9799-1-chris@chris-wilson.co.uk
intel_gt_wait_for_idle() tries to wait until all the outstanding requests
are retired and the GPU is idle. As a side effect of retiring requests,
we may submit more work to flush any pm barriers, and so the
wait-for-idle tries to flush the background pm work and catch the new
requests. However, if the work completed in the background before we
were able to flush, it would queue the extra barrier request without us
noticing -- and so we would return from wait-for-idle with one request
remaining. (This breaks e.g. record_default_state where we need to wait
until that barrier is retired, and it may slow suspend down by causing
us to wait on the background retirement worker as opposed to immediately
retiring the barrier.)
However, since we track if there has been a submission since the engine
pm barrier, we can very quickly detect if the idle barrier is still
outstanding.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1763
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423085940.28168-1-chris@chris-wilson.co.uk
During the virtual engine's submission tasklet, we take the request and
insert into the submission queue on each of our siblings. This seems
quite simply, and so no problems with ordering. However, the sibling
execlists' submission tasklets may run concurrently with the virtual
engine's tasklet, submitting the request to HW before the virtual
finishes its task of telling all the siblings. If this happens, the
sibling tasklet may *reorder* the ve->sibling[] array that the virtual
engine tasklet is processing. This can *only* reorder within the
elements already processed by the virtual engine, nevertheless the
race is detected by KCSAN:
[ 185.580014] BUG: KCSAN: data-race in execlists_dequeue [i915] / virtual_submission_tasklet [i915]
[ 185.580054]
[ 185.580076] write to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 2:
[ 185.580553] execlists_dequeue+0x6ad/0x1600 [i915]
[ 185.581044] __execlists_submission_tasklet+0x48/0x60 [i915]
[ 185.581517] execlists_submission_tasklet+0xd3/0x170 [i915]
[ 185.581554] tasklet_action_common.isra.0+0x42/0x90
[ 185.581585] __do_softirq+0xc8/0x206
[ 185.581613] run_ksoftirqd+0x15/0x20
[ 185.581641] smpboot_thread_fn+0x15a/0x270
[ 185.581669] kthread+0x19a/0x1e0
[ 185.581695] ret_from_fork+0x1f/0x30
[ 185.581717]
[ 185.581736] read to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 0:
[ 185.582231] virtual_submission_tasklet+0x10e/0x5c0 [i915]
[ 185.582265] tasklet_action_common.isra.0+0x42/0x90
[ 185.582291] __do_softirq+0xc8/0x206
[ 185.582315] run_ksoftirqd+0x15/0x20
[ 185.582340] smpboot_thread_fn+0x15a/0x270
[ 185.582368] kthread+0x19a/0x1e0
[ 185.582395] ret_from_fork+0x1f/0x30
[ 185.582417]
We can prevent this race by checking for the ve->request after looking
up the sibling array.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423115315.26825-1-chris@chris-wilson.co.uk
Fix the check for when an AUX power well enabling timeout is expected on
a legacy TypeC port.
Fixes: 89e01caac6 ("drm/i915: Use single set of AUX powerwell ops for gen11+")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422123440.19522-1-imre.deak@intel.com
When we migrated to execlists, one of the conditions we wanted to test
for was whether the breadcrumb seqno was being written before the
breadcumb interrupt was delivered. This was following on from issues
observed on previous generations which were not so strongly ordered. With
the removal of the missed interrupt detection, we have not reliable
means of detecting the out-of-order seqno/interrupt but instead tried to
assert that the relationship between the CS event interrupt and the
breadwrite should be strongly ordered. However, Icelake proves it is
possible for the HW implementation to forget about minor little details
such as write ordering and so the order between *processing* the CS
event and the breadcrumb is unreliable.
Remove the unreliable assertion, but leave a debug telltale in case we
have reason to suspect.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1658
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422141749.28709-1-chris@chris-wilson.co.uk
While the ggtt vma are protected by their object lifetime, the list
continues until it hits a non-ggtt vma, and that vma is not protected
and may be freed as we inspect it. Hence, we require the obj->vma.lock
to protect the list as we iterate.
An example of forgetting to hold the obj->vma.lock is
[1642834.464973] general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP PTI
[1642834.464977] CPU: 3 PID: 1954 Comm: Xorg Not tainted 5.6.0-300.fc32.x86_64 #1
[1642834.464979] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET94WW (2.44 ) 09/14/2017
[1642834.465021] RIP: 0010:i915_gem_object_set_tiling+0x2c0/0x3e0 [i915]
[1642834.465024] Code: 8b 84 24 18 01 00 00 f6 c4 80 74 59 49 8b 94 24 a0 00 00 00 49 8b 84 24 e0 00 00 00 49 8b 74 24 10 48 8b 92 30 01 00 00 89 c7 <80> ba 0a 06 00 00 03 0f 87 86 00 00 00 ba 00 00 08 00 b9 00 00 10
[1642834.465025] RSP: 0018:ffffa98780c77d60 EFLAGS: 00010282
[1642834.465028] RAX: ffff8d232bfb2578 RBX: 0000000000000002 RCX: ffff8d25873a0000
[1642834.465029] RDX: dead000000000122 RSI: fffff0af8ac6e408 RDI: 000000002bfb2578
[1642834.465030] RBP: ffff8d25873a0000 R08: ffff8d252bfb5638 R09: 0000000000000000
[1642834.465031] R10: 0000000000000000 R11: ffff8d252bfb5640 R12: ffffa987801cb8f8
[1642834.465032] R13: 0000000000001000 R14: ffff8d233e972e50 R15: ffff8d233e972d00
[1642834.465034] FS: 00007f6a3d327f00(0000) GS:ffff8d25926c0000(0000) knlGS:0000000000000000
[1642834.465036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1642834.465037] CR2: 00007f6a2064d000 CR3: 00000002fb57c001 CR4: 00000000001606e0
[1642834.465038] Call Trace:
[1642834.465083] i915_gem_set_tiling_ioctl+0x122/0x230 [i915]
[1642834.465121] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915]
[1642834.465151] drm_ioctl_kernel+0x86/0xd0 [drm]
[1642834.465156] ? avc_has_perm+0x3b/0x160
[1642834.465178] drm_ioctl+0x206/0x390 [drm]
[1642834.465216] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915]
[1642834.465221] ? selinux_file_ioctl+0x122/0x1c0
[1642834.465226] ? __do_munmap+0x24b/0x4d0
[1642834.465231] ksys_ioctl+0x82/0xc0
[1642834.465235] __x64_sys_ioctl+0x16/0x20
[1642834.465238] do_syscall_64+0x5b/0xf0
[1642834.465243] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1642834.465245] RIP: 0033:0x7f6a3d7b047b
[1642834.465247] Code: 0f 1e fa 48 8b 05 1d aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed a9 0c 00 f7 d8 64 89 01 48
[1642834.465249] RSP: 002b:00007ffe71adba28 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[1642834.465251] RAX: ffffffffffffffda RBX: 000055f99048fa40 RCX: 00007f6a3d7b047b
[1642834.465253] RDX: 00007ffe71adba30 RSI: 00000000c0106461 RDI: 000000000000000e
[1642834.465254] RBP: 0000000000000002 R08: 000055f98f3f1798 R09: 0000000000000002
[1642834.465255] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000080
[1642834.465257] R13: 000055f98f3f1690 R14: 00000000c0106461 R15: 00007ffe71adba30
Now to take the spinlock during the list iteration, we need to break it
down into two phases. In the first phase under the lock, we cannot sleep
and so must defer the actual work to a second list, protected by the
ggtt->mutex.
We also need to hold the spinlock during creation of a new vma to
serialise with updates of the tiling on the object.
Reported-by: Dave Airlie <airlied@redhat.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422072805.17340-1-chris@chris-wilson.co.uk
Since batch buffers dominant execution time, most preemption requests
should naturally occur during execution of a batch buffer. We wish to
verify that should a preemption occur within a batch buffer, when we
come to restart that batch buffer, it occurs at the interrupted
instruction and most importantly does not rollback to an earlier point.
v2: Do not clear the GPR at the start of the batch, but rely on them
being clear for new contexts.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422100903.25216-1-chris@chris-wilson.co.uk
For verifying reciving the EI interrupts, we need to hold the GPU in
very precise conditions (in terms of C0 cycles during the EI). If we
preempt the busy load to handle the heartbeat, this may perturb the busy
load causing us to miss the interrupt.
The other tests, while not as time sensitive, may also be slightly
perturbed, so apply the heartbeat protection across all the
measurements.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422083855.26842-1-chris@chris-wilson.co.uk
Having noticed that MI_BB_START is incurring a memory stall (see the
correlation with uncore frequency), we have to unroll the loop in order
to diminish the impact of the MI_BB_START on the instruction throughput.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421171351.19575-1-chris@chris-wilson.co.uk
Since we may lose the content of any buffer when we relinquish control
of the system (e.g. suspend/resume), we have to be careful not to rely
on regaining control. A good method to detect when we might be using
garbage is by always injecting that garbage prior to first use on
load/resume/etc.
v2: Drop sanitize callback on cleanup
v3: Move seqno reset to timeline enter, so we reset all timelines.
However, this is done on every activation during runtime and not reset.
The similar level of paranoia we apply to correcting context state after
a period of inactivity.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421092504.7416-1-chris@chris-wilson.co.uk
Let's isolate the impact of cpu frequency selection on determing the GPU
throughput in response to selection of RPS frequencies.
For real systems, we do have to be concerned with the impact of
integrating c-states, p-states and rp-states, but for the sake of
proving whether or not RPS works, one baby step at a time.
For the record, as one would hope, it does not seem to impact on the
measured performance, but we do it anyway to reduce the number of
variables. Later, we can extend the testing to encourage the the
cpu/pkg to try and sleep while the GPU is busy.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421142236.8614-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20200421142236.8614-1-chris@chris-wilson.co.uk
If we detect that the RPS end points do not scale perfectly, take the
time to measure all the in between values as well. We are aborting the
test, so we might as well spend the available time gathering critical
debug information instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200421124636.22554-1-chris@chris-wilson.co.uk
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN_ON over WARN_ON at places where struct drm_device
pointer can be extracted.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-8-pankaj.laxminarayan.bharadiya@intel.com
struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.
Prefer drm_WARN_ON over WARN_ON at places where struct drm_device
pointer can be extracted.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-5-pankaj.laxminarayan.bharadiya@intel.com
The early check for compressed_bpp being zero is too early, as it is hit
also when DSC is not enabled. Move the checks down to where the values
are actually needed. This is a paranoid check for a situation that
should not happen, so we don't really care about handling it gracefully
apart from not oopsing.
Fixes: 48b8b04c79 ("drm/i915/display: Enable DP Display Audio WA")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1750
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420131632.23283-1-jani.nikula@intel.com
Remove a number of inlines from .c files, and let the compiler decide
what's best. There's more to do, but need to start somewhere, and need
to start setting the example.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420140438.14672-2-jani.nikula@intel.com
AUX power wells sometimes need additional handling besides just
programming the specific power well registers:
* Type-C PHY's also require additional Type-C register programming
* ICL combo PHY's require additional workarounds
* TGL & EHL combo PHY's can be treated like any other power well
Today we have dedicated aux ops for the ICL combo PHY and Type-C cases.
This works fine, but means that when a new platform shows up with
identical general power well handling, but different types of PHYs on
its outputs, we have to define an entire new power well table for that
platform and can't just re-use the table from the earlier platform -- as
an example, see ehl_power_wells[], which is a subset of
icl_power_wells[], *except* that we need to specify different AUX ops
for the third display.
If we instead create a single set of top-level aux ops that will check
the PHY type and then dispatch to the appropriate handlers, we can get
more reuse out of our power well definitions. This allows us to
immediately eliminate ehl_power_wells[] and simply reuse the ICL table;
if future platforms follow the same general power well assignments as
either ICL or TGL, we'll be able to re-use those tables in the same way.
Note that I've only changed ICL+ platforms over to using the new icl_aux
ops; at this point it's unlikely that we'll have any new platforms that
re-use gen9 or earlier power well configurations.
v2:
- ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power
wells. But we know those wells will only used on Type-C outputs
anyway, so we can just check is is_tc_tbt flag in the condition.
(Jose).
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-2-matthew.d.roper@intel.com
igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which
returns a reference of the i915_address_space object to "vm" with
increased refcount.
When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the
refcount should be decreased to keep refcount balanced.
The reference counting issue happens in two exception handling paths of
igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns
IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not
decreased, causing a refcnt leak.
Fix this issue by jumping to "out_vm" label when
i915_gem_object_create_internal() returns IS_ERR.
Fixes: a4e7ccdac3 ("drm/i915: Move context management under GEM")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1587361342-83494-1-git-send-email-xiyuyang19@fudan.edu.cn
After having testing all the RPS controls individually, we need to take
a step back and check how our RPS worker integrates them to perform
dynamic GPU reclocking. So do that by submitting a spinner and wait and
see what happens.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-6-chris@chris-wilson.co.uk
If we can not manipulate the frequency with RPS, then comparing min/max
power consumption is pointless / misleading. We will leave the warning
about not being able to control the frequency selection via RPS to other
tests so as not to confuse this more specialised check.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-2-chris@chris-wilson.co.uk
One of the core tenents of reclocking the GPU is that its throughput
scales with the clock frequency. We can observe this by incrementing a
loop counter on the GPU, and compare the different execution rates at
the notional RPS frequencies.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420172739.11620-1-chris@chris-wilson.co.uk
We shouldn't try to do link retraining from the short hpd handler.
We can't take any modeset locks there so this is racy as hell.
Push the whole thing into the hotplug work like we do with SST.
We'll just have to adjust the SST retraining code to deal with
the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and
do a full modeset instead. Stuff like port sync and the tgl+
MST master transcoder stuff maybe doesn't work well if we
try to retrain without following the proper modeset sequence.
So far haven't done any actual tests to confirm that though.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Make intel_dp_check_mst_status() somewhat legible by humans.
Note that the return value of drm_dp_mst_hpd_irq() is always
either 0 or -ENOMEM, and we never did anything with the latter
so we can just ignore the whole thing.
We can also get rid of the direct drm_dp_mst_topology_mgr_set_mst(false)
call since returning -EINVAL causes the caller to do the very same call
for us.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152734.464-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Pass the encoder all the way down to
intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the
intel_ddi_get_crtc_encoder() eyesore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Push the TRANS_DDI_FUNC_CTL into the encoder enable hook. The disable
is already there, and as a followup will enable us to pass the encoder
all the way down.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
No reason that I can see why we should enable TRANS_DDI_FUNC_CTL
before we set up the watermarks of configure the mbus stuff.
In fact reordering these seems to match the bspec sequence better,
and crucially will allow us to push the TRANS_DDI_FUNC_CTL enable
into the encoder enable hook as a followup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Since intel_ddi_enable_pipe_clock() was pushed down into the
encoder hooks we can pass on the encoder instead of having
to use intel_ddi_get_crtc_encoder().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
This was sort of annoying me:
random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47
This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().
Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Looks like I accidentally made it so you couldn't force DPCD backlight
support on, whoops. Fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 17f5d57915 ("drm/i915: Force DPCD backlight mode on X1 Extreme 2nd Gen 4K AMOLED panel")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413214407.1851002-1-lyude@redhat.com
We have some module unload/reload tests hitting an issue with i915
unbinding the component interface before the audio driver has properly
put the power. Log an error about it for ease of debugging. (Normally
this leads to a wakeref debug splat on the power well.)
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417065132.23048-1-jani.nikula@intel.com
Fix the warning caused by enabling the autosectionlabel extension in the
kernel Sphinx build:
Documentation/gpu/i915.rst:610: WARNING: duplicate label
gpu/i915:layout, other instance in Documentation/gpu/i915.rst
The autosectionlabel extension adds labels to each section title for
cross-referencing, but forbids identical section titles in a
document. With kernel-doc, this includes sections titles in the included
kernel-doc comments.
In the warning message, Sphinx is unable to reference the labels in
their true locations in the kernel-doc comments in source. In this case,
there's "Layout" sections in both gt/intel_workarounds.c and
i915_reg.h. Rename the section in the latter to "File Layout".
Fixes: 58ad30cf91 ("docs: fix reference to core-api/namespaces.rst")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417130109.12791-1-jani.nikula@intel.com
DMA_MASK bit values are different for different generations.
This will become more difficult to manage over time with the open
coded usage of different versions of the device.
Fix by:
disallow setting of dma mask in AGP path (< GEN(5) for i915,
add dma_mask_size to the device info configuration,
updating open code call sequence to the latest interface,
refactoring into a common function for setting the dma segment
and mask info
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
cc: Brian Welty <brian.welty@intel.com>
cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417195107.68732-1-michael.j.ruhl@intel.com
The variable test_result is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417160829.112776-1-colin.king@canonical.com
Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.
So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.
In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.
So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.
Fixes: 4444df6e20 ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414230442.262092-1-jose.souza@intel.com
This is a expected timeout of static TC ports not conneceted, so
not throwing warnings that would taint CI.
v3:
- moved checks to tc_phy_aux_timeout_expected()
v4:
- moved and add comments to tc_phy_aux_timeout_expected()
v5:
- only checking tc_legacy_port for TC ports
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-8-jose.souza@intel.com
As described in "drm/i915/tc/icl: Implement TC cold sequences" users
of TC functions should held aux power well during access to avoid
read garbage due HW in TC cold state.
v3:
- renamed is_tc_cold_blocked() to assert_tc_cold_blocked()
- restored the removed 0xffffffff checks
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-7-jose.souza@intel.com
TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.
For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.
So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.
v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS
v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error
v5:
- only sleeping 1msec when ret is -EAGAIN
BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com
As part of ICL TC cold exit sequences we need to request aux power
well before lock the access to TC ports, so skiping the
intel_tc_port_ref_held() check for TC legacy ports.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-5-jose.souza@intel.com
This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.
Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.
So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.
The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.
Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.
v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access
v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN
v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future
BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com
This is a preparation for ICL TC cold exit sequences.
v2:
- renamed new functions to hsw_power_well_enable_prepare()/complete()
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-3-jose.souza@intel.com
This is a similar function to intel_aux_power_domain() but it do not
care about TBT ports, this will be needed by ICL TC sequences.
v2:
- renamed to intel_legacy_aux_to_power_domain()
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-2-jose.souza@intel.com
Moving the code to return the digital port of the aux channel also
removing the intel_phy_is_tc() to make it generic.
digital_port will be needed in icl_tc_phy_aux_power_well_enable()
so adding it as a parameter to icl_tc_port_assert_ref_held().
While at at removing the duplicated call to icl_tc_phy_aux_ch() in
icl_tc_port_assert_ref_held().
v2:
- fixed build when DRM_I915_DEBUG_RUNTIME_PM is not set
- moved to before hsw_wait_for_power_well_enable() as it will be
needed by hsw_wait_for_power_well_enable() in a future patch
v4:
- fixed action of if (!dig_port), continue instead of return
Cc: You-Sheng Yang <vicamo@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-1-jose.souza@intel.com
A basic premise of RPS is that at lower frequencies, not only do we run
slower, but we save power compared to higher frequencies. For example,
when idle, we set the minimum frequency just in case there is some
residual current. Since the power curve should be a physical
relationship, if we find no power saving it's likely that we've broken
our frequency handling, so test!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417152018.13079-2-chris@chris-wilson.co.uk
Lets have a unified way to handle SAGV changes,
espoecially considering the upcoming Gen12 changes.
Current "standard" way of doing this in commit_tail
is pre/post plane updates, when everything which
has to be forbidden and not supported in new config
has to be restricted before update and relaxed after
plane update.
v2: - Removed unneeded returns(Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415143911.10244-5-stanislav.lisovskiy@intel.com
Addressing one of the comments, recommending to extract platform
specific code from intel_can_enable_sagv as a preparation, before
we are going to add support for tgl+.
v2: - Removed whitespace
v3: - Removed premature debug and new cycle introduction(Ville)
- Added missing no active pipes check(Ville)
v4: - Fixed stupid mistake with plane_state caused by stupid macro change
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415145740.28241-1-stanislav.lisovskiy@intel.com
Add correspondent helpers to be able to get old/new bandwidth
global state object.
v2: - Fixed typo in function call
v3: - Changed new functions naming to use convention proposed
by Jani Nikula, i.e intel_bw_* in intel_bw.c file.
v4: - Change function naming back to intel_atomic* pattern,
was decided to rename in a separate patch series.
v5: - Fix function naming to match existing practices(Ville)
v6: - Removed spurious whitespace
v7: - Removed bw_state NULL checks(Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415143911.10244-3-stanislav.lisovskiy@intel.com
It seems that although (perhaps because of the memory stall?) the
spinner has signaled that it has started, it still takes some time to
spin up to 100% utilisation of the HW. Since the test depends on the
full utilisation of the HW to trigger the RPS interrupt, wait a little
bit and flush the interrupt status to be sure that the event we see if
from the spinner.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417093928.17822-1-chris@chris-wilson.co.uk
Before we resume, we reset the HW so we restart from a known good state.
However, as a part of the reset process, we drain our pending CS event
queue -- and if we are resuming that does not correspond to internal
state. On setup, we are scrubbing the CS pointers, but alas only on
setup.
Apply the sanitization not just to setup, but to all resumes.
Reported-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416114117.3460-1-chris@chris-wilson.co.uk
For certain DP VDSC bpp settings, hblank asserts before hblank_early,
leading to a bad audio state. Driver need to program "hblank early
enable" and "samples per line" parameters in AUDIO_CONFIG_BE
register.
This is Display Audio WA #1406928334 for 4k+VDSC usecase
applicable on DP encoders. Implemented the same.
v2: Fixed build failures on 32bit machine.
v3: Dropped u64, added helpers for sample room calculation,
other general comments as per Jani Nikula's feedback.
Also fixed connector type check (spotted by Anshuman)
v4: Addressed Jani Nikula and Kai's review comments.
v5: Addressed Anshuman's review comment and used crtc_* variable
to get timings.
v6: Dropped a redundant initialization.
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416105419.9664-1-uma.shankar@intel.com
Software is not expected to populate engine context except when using
restore inhibit bit or golden state to initialize it for the first time.
Therefore, if a newly submitted guest context is the same as the last
shadowed one, no need to populate its engine context from guest again.
Currently using lrca + ring_context_gpa to identify whether two guest
contexts are the same.
The reason of why context id is not included as an identifier is that
i915 recently changed the code and context id is only unique for a
context when OA is enabled. And when OA is on, context id is generated
based on lrca. Therefore, in that case, if two contexts are of the same
lrca, they have identical context ids as well.
(This patch also works with old guest kernel like 4.20.)
for guest context, if its ggtt entry is modified after last context
shadowing, it is also deemed as not the same context as last shadowed one.
v7:
-removed local variable "valid". use the one in s->last_ctx diretly
v6:
-change type of lrca of last ctx to be u32. as currently it's all
protected by vgpu lock (Kevin Tian)
-reset valid of last ctx to false once it needs to be repopulated before
population completes successfully (Kevin Tian)
v5:
-merge all 3 patches into one patch (Zhenyu Wang)
v4:
- split the series into 3 patches.
- don't turn on optimization until last patch in this series (Kevin Tian)
- define lrca to be atomic in this patch rather than update its type in
the second patch (Kevin Tian)
v3: updated commit message to describe engine context and context id
clearly (Kevin Tian)
v2: rebased to 5.6.0-rc4+Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200417091334.32628-1-yan.y.zhao@intel.com
It requires a separate debugfs attribute to expose lpsp
status to user space, as there may be display less configuration
without any valid connected output, those configuration will not be
able to test lpsp status, if lpsp status exposed from a connector
based debugfs attribute.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-5-anshuman.gupta@intel.com
Add connector debugfs attributes for each intel
connector which is getting register.
v2:
- adding connector debugfs for each connector in
intel_connector_register() to fix CI failure for legacy connectors.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-4-anshuman.gupta@intel.com
New i915_pm_lpsp igt solution approach relies on connector specific
debugfs attribute i915_lpsp_capability, it exposes whether an output is
capable of driving lpsp.
v2:
- CI fixup.
v3:
- register i915_lpsp_info only for supported connector. [Jani]
- use intel_display_power_well_is_enabled() instead of looking
inside power_well count. [Jani]
- fixes the lpsp capable conditional logic. [Jani]
- combined the lpsp capable and enable info. [Jani]
v4:
- Separate out connector based debugfs i915_lpsp_capability
lpsp enable status would be exposes by different entry. [Animesh]
v5:
- Add Platform Gen condition to add i915_lpsp_capability
and some cosmetic nitpick changes. [Animesh]
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-3-anshuman.gupta@intel.com
Gen11 onwards PG3 is contains functions for pipe B,
external displays, and VGA. It make sense to add
a power well id with name ICL_DISP_PW_3 rather then
TGL_DISP_PW_3, Also PG3 power well id requires to
know if lpsp is enabled.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-2-anshuman.gupta@intel.com
As on ICL, we want to use the Type-C aux handlers for the TBT aux wells
to ensure the DP_AUX_CH_CTL_TBT_IO flag is set properly.
Fixes: 656409bbaf ("drm/i915/tgl: Add power well support")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415233435.3064257-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The check was always succeeding even in case of a mismatch due to the
HDCP_STATUS_ENC bit being set. Make sure both bits are actually set.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Fixes: 2320175feb ("drm/i915: Implement HDCP for HDMI")
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328104100.12162-1-oliver.barta@aptiv.com
PLANE_CTL_FORMAT_AYUV is already supported, according to hardware
specification.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407215546.5445-2-bob.j.paauwe@intel.com
If we use a non-forcewaked write to PMINTRMSK, it does not take effect
until much later, if at all, causing a loss of RPS interrupts and no GPU
reclocking, leaving the GPU running at the wrong frequency for long
periods of time.
Reported-by: Francisco Jerez <currojerez@riseup.net>
Suggested-by: Francisco Jerez <currojerez@riseup.net>
Fixes: 35cc7f32c2 ("drm/i915/gt: Use non-forcewake writes for RPS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-2-chris@chris-wilson.co.uk
Since we depend upon RPS generating interrupts after evaluation
intervals to determine when to up/down clock the GPU, it is imperative
that we successfully enable interrupt generation! Verify that we do see
an interrupt if we keep the GPU busy for an entire EI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-1-chris@chris-wilson.co.uk
Even though the bspec is missing gen12 register details for the MCR
selector register (0xFDC), this is confirmed by hardware folks to be a
mistake; the register does exist and we do indeed need to steer
multicast register reads to an appropriate instance the same as we did
on gen11.
Note that despite the lack of documentation we were still using the MCR
selector to read INSTDONE and such in read_subslice_reg() too.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Media decompression support should not be advertised on any display
planes for steppings A0-C0.
Bspec: 53273
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414211118.2787489-3-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
IOVA(GPA)s of context pages are checked and if they are consecutive,
read/write them together in one intel_gvt_hypervisor_read_gpa() /
intel_gvt_hypervisor_write_gpa().
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200415035827.26476-1-yan.y.zhao@intel.com
as shadow context is pinned in intel_vgpu_setup_submission() and
unpinned in intel_vgpu_clean_submission(), its base virtual address of
is safely obtained from lrc_reg_state. no need to call kmap()/kunmap()
repeatedly.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200415035728.26424-1-yan.y.zhao@intel.com
We need to start passing memory latency as a
parameter when calculating plane wm levels,
as latency can get changed in different
circumstances(for example with or without SAGV).
So we need to be more flexible on that matter.
v2: Changed latency type from u32 to unsigned int(Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409154730.18568-2-stanislav.lisovskiy@intel.com
Replace the TGL/ICL specific platform checks with a more generic check
using INTEL_GEN(). Fixes bug with broken audio after S3 resume on JSL
platforms.
An initial version of state save and restore of AUD_FREQ_CNTRL register
was added for subset of platforms in commit 87c1694533
("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend"). The state
save has proven to work well and it is needed in newer platforms, so needs
to be extended. Although the logic is not in practise needed on GEN9/10
systems, follow the hardware specification and apply state and restore on
all gen9+ platforms.
Bspec: 49281
Link: https://github.com/thesofproject/linux/issues/1719
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330144421.11632-1-kai.vehmanen@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
which allows us to remove the lib-ksyms.o workaround, and to
solve the last known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler
tests in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
-----BEGIN PGP SIGNATURE-----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=jpyF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJej453AAoJEAx081l5xIa+r7YQAIX48cUROehoNDhzEHnAxJuU
WZXNHKaMCaDPzAs6SyCtHiPFWH6trBR5McE2dXfg6qc33lnzROFNp5PLB7qb4O+q
+3QkJ5cGd1bohT7vn3omP9FxxZeD4H4bE/zat+yUPwMWJYSUz4m6w6Ya0rIPa8HS
d9nRL0Y6wGBhm8/E0WCB6fe5G96D1JOFGLhfbVajGlDW/I+eBiS5WEyrtlIW698K
Q7lTNOXKEi9kFEZiW39RbKwW3YwqOEiQf1k0KbvUqctq4qLskHD3MgJpmkAiGVPH
mSnTYPPyATILVGKcmEHR3oB9wuYsoPhNgGCVhhm1MppI8GVUzfk6uqOfdK8UNfDU
IRAZ05AynmMMFNu/4Fw0SyR1sbj4OtAiG0hWaJ6Ou9MBzhERGXfT3+/BzeHsR4MJ
+fVIbOArSCAeFTAkqcLVbMKjivAJjullpsj36DFn+lXmHnxB98zAkSNT5dQcDjzl
bp6FhJXm7pWYx8SvkGRneESqLdr2WVgyZmP6u+kgzZ5pPubWSDqY1IFu1exb5Sne
bf7HoPzQ6LyD5KgX5WdoJ5++bcvQ9G4/qDF96NY6emCMKcwnOaAzvtErxQLpFeWP
dZwnxHXXtxY4Z4r5bFURPeWX3rWX5f/cCZ8B7mTUDSTa4hgzV8yUX3ZQBc+9Knja
zuvnpm4j1BXFqOg0Xfsu
=ZTAf
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"As expected, more fixes did turn up in the latter part of the week.
The drm_local_map build regression fix is here, along with temporary
disabling of the hugepage work due to some amdgpu related crashes.
Otherwise it's just a bunch of i915, and amdgpu fixes.
legacy:
- fix drm_local_map.offset type
ttm:
- temporarily disable hugepages to debug amdgpu problems.
prime:
- fix sg extraction
amdgpu:
- Various Renoir fixes
- Fix gfx clockgating sequence on gfx10
- RAS fixes
- Avoid MST property creation after registration
- Various cursor/viewport fixes
- Fix a confusing log message about optional firmwares
i915:
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
analogix_dp:
- probe fix
virtio:
- oob fix in object create"
* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/ttm: Temporarily disable the huge_fault() callback
drm/bridge: analogix_dp: Split bind() into probe() and real bind()
drm/legacy: Fix type for drm_local_map.offset
drm/amdgpu/display: fix warning when compiling without debugfs
drm/amdgpu: unify fw_write_wait for new gfx9 asics
drm/amd/powerplay: error out on forcing clock setting not supported
drm/amdgpu: fix gfx hang during suspend with video playback (v2)
drm/amd/display: Check for null fclk voltage when parsing clock table
drm/amd/display: Acknowledge wm_optimized_required
drm/amd/display: Make cursor source translation adjustment optional
drm/amd/display: Calculate scaling ratios on every medium/full update
drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
drm/amd/display: Fix incorrect cursor pos on scaled primary plane
drm/amd/display: change default pipe_split policy for DCN1
drm/amd/display: Translate cursor position by source rect
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
drm/amd/display: Avoid create MST prop after registration
drm/amdgpu/psp: dont warn on missing optional TA's
drm/amdgpu: update RAS related dmesg print
drm/amdgpu: resolve mGPU RAS query instability
...
With timeslice yielding on a semaphore, we may complete timeslices much
faster than we were expecting and already have yielded the stuck
request. Before complaining that timeslicing is not enabled, check that
we haven't already applied the switch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200410081638.19893-1-chris@chris-wilson.co.uk
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl6OSOYACgkQ+mJfZA7r
E8rB2ggAmRovxorXRv0f1S8CZ4U6Ffu3rqjYumyTBvoCxIMqvA9MgF6dMO3piMIe
YAl+cp4GKwY86gCm1o3vKIrF0QIOo8pmukdD9jP+BdyMWEOpdGBMQNhxb9Jq3VZX
qlODVetHxZlSsd6voC3Iu21PEM2ZZZoVrgGySTjF46+k1zA/KDLlSzMT0YcS0Jqw
vBK1kzFAWPCIQSAbvyMqjt9d+PnVgWaqiK72G884+PogwSpNCcVXQ9DsQlLp6rue
ji1bFXCKXBHNDRJbljtCABEwlHj1TBciZzWwIvFlXho/hRUvmHJF6C4cw55SyEzz
/5xYu96/3AokirjTqH/CYxeQQI0pCQ==
=kIzD
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-04-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Flush all the reloc_gpu batch (Chris)
- Ignore readonly failures when updating relocs (Chris)
- Fill all the unused space in the GGTT (Chris)
- Return the right vswing table (Jose)
- Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408215952.GA1623934@intel.com
The variable err is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409133107.415812-1-colin.king@canonical.com
In an address space there can be sprinkling of I915_COLOR_UNEVICTABLE
nodes, which lack a parent vma. For platforms with cache coloring we
might be very unlucky and abut with such a node thinking we can simply
unbind the vma.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408170456.399604-1-matthew.auld@intel.com
CONFIG_AS_MOVNTDQA was introduced by commit 0b1de5d58e ("drm/i915:
Use SSE4.1 movntdqa to accelerate reads from WC memory").
We raise the minimal supported binutils version from time to time.
The last bump was commit 1fb12b35e5 ("kbuild: Raise the minimum
required binutils version to 2.21").
I confirmed the code in $(call as-instr,...) can be assembled by the
binutils 2.21 assembler and also by LLVM integrated assembler.
Remove CONFIG_AS_MOVNTDQA, which is always defined.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
This patch process phy compliance request by programming requested
vswing, pre-emphasis and test pattern.
v1: Initial patch.
v2: Fixes added during testing with test-scope. (Khaled/Clint/Manasi)
- pipe used as argument during registers programming instead of port.
- TRANS_CONF must be disable/enable as well during ddi disable/enable.
- harcoded PLTPAT 80 bit custom pattern as the DPR-100 does not set it
in the sink’s DPCDs
- TRANS_DDI_FUNC_CTL DDI_Select (Bits 27:30) need to reset/set during
disable/enable.
v3: used macros instead of numbers and some cosmetic changes. [Manasi]
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-8-animesh.manna@intel.com
DP_COMP_CTL and DP_COMP_PAT register used to program DP
compliance pattern.
v1: Initial patch.
v2: used pipe instead of port in macro definition. [Manasi]
v3: used trans_offset for offset calculation. [Manasi]
v4: Used MMIO_PIPE for evenly spaced register offset instead
MMIO_PIPE2. [Ville]
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324051111.29398-1-animesh.manna@intel.com
These debugfs entry will help testapp to understand the test request
during dp phy compliance mode.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-6-animesh.manna@intel.com
During DP phy compliance auto test mode, sink will request
combination of different test pattern with differnt level of
vswing, pre-emphasis. Function added to prepare for it.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-5-animesh.manna@intel.com
vswing/pre-emphasis adjustment calculation is needed in processing
of auto phy compliance request other than link training, so have
made non-static function.
No functional change.
v1: initial patch.
v2:
- used "intel_dp" prefix in function name. (Jani)
- used array notation instead pointer for link_status. (Ville)
v3: Scrapped the initial patch, modified commit description accordingly.
- made non-static function and used intel_dp prefix. (Jani, Manasi)
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316103759.12867-4-animesh.manna@intel.com
Convert all the pr_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-9-jani.nikula@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-8-jani.nikula@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-7-jani.nikula@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-6-jani.nikula@intel.com
Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.
No functional changes.
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-5-jani.nikula@intel.com
Since the semaphore interrupt may cause us to yield the timeslice
immediately, we may cancel the timer before we notice the submission is
complete. The assertion is no longer valid due to the race with the
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407222625.15542-1-chris@chris-wilson.co.uk
core:
- revert drm_mm atomic patch
- dt binding fixes
fbcon:
- null ptr error fix
i915:
- GVT fixes
nouveau:
- runpm fix
- svm fixes
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
vboxvideo:
- remove conflicting fbs
vc4:
- mode validation fix
xen:
- fix PTR_ERR usage
-----BEGIN PGP SIGNATURE-----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=HNn4
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is a set of fixes that have queued up, I think I might have
another pull with some more before rc1 but I'd like to dequeue what I
have now just in case Easter is more eggciting that expected.
The main thing in here is a fix for a longstanding nouveau power
management issues on certain laptops, it should help runtime
suspend/resume for a lot of people.
There is also a reverted patch for some drm_mm behaviour in atomic
contexts.
Summary:
core:
- revert drm_mm atomic patch
- dt binding fixes
fbcon:
- null ptr error fix
i915:
- GVT fixes
nouveau:
- runpm fix
- svm fixes
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
vboxvideo:
- remove conflicting fbs
vc4:
- mode validation fix
xen:
- fix PTR_ERR usage"
* tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/nouveau/kms/nv50-: wait for FIFO space on PIO channels
drm/nouveau/nvif: protect waits against GPU falling off the bus
drm/nouveau/nvif: access PTIMER through usermode class, if available
drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
drm/nouveau/svm: remove useless SVM range check
drm/nouveau/svm: check for SVM initialized before migrating
drm/nouveau/svm: fix vma range check for migration
drm/nouveau: remove checks for return value of debugfs functions
drm/nouveau/ttm: evict other IO mappings when running out of BAR1 space
drm/amdkfd: kfree the wrong pointer
drm/amd/display: increase HDCP authentication delay
drm/amd/display: Correctly cancel future watchdog and callback events
drm/amd/display: Don't try hdcp1.4 when content_type is set to type1
drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.c
drm/amd/powerplay: drop redundant BIF doorbell interrupt operations
drm/amd/display: Fix dcn21 num_states
drm/amd/display: Enable BT2020 in COLOR_ENCODING property
drm/amd/display: LFC not working on 2.0x range monitors (v2)
drm/amd/display: Support plane level CTM
...
If we find ourselves waiting on a MI_SEMAPHORE_WAIT, either within the
user batch or in our own preamble, the engine raises a
GT_WAIT_ON_SEMAPHORE interrupt. We can unmask that interrupt and so
respond to a semaphore wait by yielding the timeslice, if we have
another context to yield to!
The only real complication is that the interrupt is only generated for
the start of the semaphore wait, and is asynchronous to our
process_csb() -- that is, we may not have registered the timeslice before
we see the interrupt. To ensure we don't miss a potential semaphore
blocking forward progress (e.g. selftests/live_timeslice_preempt) we mark
the interrupt and apply it to the next timeslice regardless of whether it
was active at the time.
v2: We use semaphores in preempt-to-busy, within the timeslicing
implementation itself! Ergo, when we do insert a preemption due to an
expired timeslice, the new context may start with the missed semaphore
flagged by the retired context and be yielded, ad infinitum. To avoid
this, read the context id at the time of the semaphore interrupt and
only yield if that context is still active.
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407130811.17321-1-chris@chris-wilson.co.uk
If we want to percolate information back from the HW, up through the GEM
context, we need to wait until the intel_context is scheduled out for
the last time. This is handled by the retirement of the intel_context's
barrier, i.e. by listening to the pulse after the notional unpin. So
wait until the intel_context is finally retired before releasing the
engine, so that we can inspect the final context state and pass it on.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-3-chris@chris-wilson.co.uk
Allow the caller to also wait upon the barriers stored in i915_active.
v2: Hook up i915_request_await_active(I915_ACTIVE_AWAIT_BARRIER) as well
for completeness, and avoid the lazy GEM_BUG_ON()!
v3: Pull flush_lazy_signals() under the active-ref protection as it too
walks the rbtree and so we must be careful that we do not free it as we
iterate.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-2-chris@chris-wilson.co.uk
Later use will require asynchronous waits on the active timelines, but
will not utilize an async wait on the exclusive channel. Make the await
on the exclusive fence explicit in the selection flags.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406155840.1728-1-chris@chris-wilson.co.uk
__i915_gem_object_flush_map() takes a byte range, so feed it the written
bytes and do not mistake the u32 index as bytes!
Fixes: a679f58d05 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk
(cherry picked from commit 30c88a47f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
