This is to fix missed mmap range check on vGPU bar2 region
and only allow to map vGPU allocated GMADDR range, which means
user space should support sparse mmap to get proper offset for
mmap vGPU aperture. And this takes care of actual pgoff in mmap
request as original code always does from beginning of vGPU
aperture.
Fixes: 659643f7d8 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Cc: "Monroy, Rodrigo Axel" <rodrigo.axel.monroy@intel.com>
Cc: "Orrala Contreras, Alfredo" <alfredo.orrala.contreras@intel.com>
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Recently in commit fbf508da74 ("powerpc: split compat syscall table
out from native table") we changed the layout of the system call
table. Instead of having two entries for each syscall number, one for
the regular entry point and one for the compat entry point, we now
have separate tables for regular and compat entry points.
This inadvertently broke syscall tracing (CONFIG_FTRACE_SYSCALLS),
because our implementation of arch_syscall_addr() knew about the
layout of the table (it did nr * 2).
We can fix it just by dropping our version of arch_syscall_addr() and
using the generic version which does:
return (unsigned long)sys_call_table[nr];
Fixes: fbf508da74 ("powerpc: split compat syscall table out from native table")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
VFIO region space is allocated when one region is registered for
one vgpu. So free the space when destroy the vgpu.
Also change the parameter of detach_vgpu callback to use vgpu directly.
Fixes: b851adeac0 ("drm/i915/gvt: Add opregion support")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Commit 3be2df00e2 ("powerpc/pseries/npu: Enable platform support")
added a call to pnv_npu2_init() in pseries code. This causes a build
break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV:
powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup':
pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init'
This commit therefore wraps that line in an ifdef, so that pseries
builds without powernv.
Fixes: 3be2df00e2 ("powerpc/pseries/npu: Enable platform support")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Frob change log a bit to blame a different commit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fix i3c_attach/reattach functions.
During the i3c_attach the driver ignores the static address used for
SETDASA CCC command.
During the i3c_reattach the driver doesn't update master->addrs[data->index]
with new address if old_dyn_addr = 0.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Because we may call blk_mq_get_driver_tag() directly from
blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may
come and the above DEADLOCK is triggered.
Commit ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to
fix this issue by using 'spin_lock_bh', which isn't enough because we
complete request from hardirq context direclty in case of multiqueue.
Cc: Clark Williams <williams@redhat.com>
Fixes: ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We allocate nd_set in acpi_nfit_init_interleave_set() and assignn it to
ndr_desc, while the assignment is done twice in this function.
This patch removes the first assignment. No functional change.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After commit eb01d42a77 ("PCI: consolidate PCI config entry in
drivers/pci"), all the PCI kconfig options appear below "PCI support"
rather than within a sub-menu. This is because menuconfig expects all
kconfig entries to be enclosed in an if/endif section. Add the missing
if/endif.
With this, "depends on PCI" is redundant in the sub-menu entries and can
be removed.
Fixes: eb01d42a77 ("PCI: consolidate PCI config entry in drivers/pci")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If client have not provided the mask base register then do not
write into the mask register.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com>
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 62cac480f3 ("MIPS: kexec: Make a framework for both jumping and
halting on nonboot CPUs") broke the build of the OCTEON platform as
the relocated_kexec_smp_wait() is now static and not longer exported in
kexec.h.
Replace it by kexec_reboot() like it has been done in other places.
Fixes: 62cac480f3 ("MIPS: kexec: Make a framework for both jumping and halting on nonboot CPUs")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: ralf@linux-mips.org
Cc: stable@vger.kernel.org # 4.20+
When the ioctl interface for the write commands was introduced it did
not mark the core response with UVERBS_ATTR_F_VALID_OUTPUT. This causes
rdma-core in userspace to not mark the buffers as written for valgrind.
Along the same lines it turns out we have always missed marking the driver
data. Fixing both of these makes valgrind work properly with rdma-core and
ioctl.
Fixes: 4785860e04 ("RDMA/uverbs: Implement an ioctl that can call write and write_ex handlers")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
[Why]
The cursor vanishes when touching the top of edge of the screen for
Raven on Linux.
This occurs because the cursor height is not taken into account when
deciding to disable the cursor.
[How]
Factor in the cursor height into the cursor calculations - and mimic
the existing x position calculations.
Fixes: 94a4ffd1d4 ("drm/amd/display: fix PIP bugs on Dal3")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hotplug on raven results in REG_WAIT_TIMEOUT warning
due to failing attempt to lock disabled otg for the hubp
interdependent pipes programming.
[How]
Don't setup pipe interdependencies for disabled otg.
Also removed the unnecessary duplicate logic checks.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PPLIB not receive the PME when unplug.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes a stuttering issue that occurs when moving a hardware cursor
when VRR is enabled.
Previously when VRR is enabled atomic check will grab the connector
state for every atomic update. This has to lock the connector in order
to do so. The locking is bad enough by itself for performance, but
it gets worse with what we do just below that - add all the planes
for the CRTC to the commit.
This prevents the cursor fast path from working - there's more than one
plane now. With state->allow_modeset = true on top of this, it also
adds and removes all the planes from the DC context triggering a full
(very slow) update in DC.
[How]
We need the connector state to get the VRR min/max capbilities, but we
only need them when there's a CRTC mode change or when VRR is toggled.
The condition has been updated accordingly.
Fixes: 3cc22f281318 ("drm/amdgpu: Set FreeSync state using drm VRR properties")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the DMCU's iRAM definition was moved to the newly created
power_helpers, a #pragma pack was lost, causing the iRAM to be misaligned
[How]
Restore the #pragma pack
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
acg btc was added to Vega12
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dGPUs need their own topology devices. Don't assign them to APU topology
devices with CPU cores.
Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Elias Konstantinidis <ekondis@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ifdef x86_64 specific code.
Allow enabling CONFIG_HSA_AMD on ARM64.
v2: Fixed a compiler warning due to an unused variable
CC: Mark Nutter <Mark.Nutter@arm.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Mark Nutter <Mark.Nutter@arm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The swap_lock used by sbitmap has a chain with locks taken from softirq,
but the swap_lock is not protected from being preempted by softirqs.
A chain exists of:
sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock
Where the sbq->ws[i].wait lock can be taken from softirq context, which
means all locks below it in the chain must also be protected from
softirqs.
Reported-by: Clark Williams <williams@redhat.com>
Fixes: 58ab5e32e6 ("sbitmap: silence bogus lockdep IRQ warning")
Fixes: ea86ea2cdc ("sbitmap: amortize cost of clearing bits")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Get rid of some WARN_ON() from the ACPI code
- Staticize a symbol
- Fix MMC polarity detection
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcPEajAAoJEEEQszewGV1zUEEP/jW6tRnSQlH2TXsn+9ljH3Q4
y8LicXEK1QTeP8TlJ9ZUQr8Vgy24hzekUy65euDyyGnXCocTS+UCWY7hznU+O1BX
Q67WrrtgOaqrkxNTYP6HBzUdJ7yza5rw4kWf8qwKQtP/giyMx+XXjzv849YHfqkv
E903+cLhNBtRafq756qV+6RJg7C7vhGhMabGny/PTkjtrD6NmkIl/A3qVGFLo/Zu
Kfwn7gpIMiXJyN2GFC8S5seESwuaZKQ2gFfdYZD2k5yTM+YvWockZjhzMMkE5OE3
RmffBw2RNWvqAZvv3PxH42AQSqKtBCaJOu2f8fGdKY/IG/Z5g4i9jAIFgh+C0P1P
l3ySji03POdvKR7dZmsqLAyMsVEppV101l6bVhkqDf99GBSlr9mPW42w2jlYdWAu
eVM6Wtkn6ssuOp3Da47Burk7dVoSo+eqRwzZkLB2TgY2oLhXyk+798e71XFnEv5G
TlY3D4n7/ozfbrN2cZX3pbXowc3RoMt9JuUnQAulO/Zjd1yoNy2lkb10mM+iIm2z
X1mNP9H5TlBLgS9QIL2Ng7DOJXO3av2UjfPENJ4yvufzjEtrGf2N9SXx7QYDDlFh
5DZV/ZFT6iKkzhi/9sWYFCQf83+57tzea/KMzPT2Xt+n8Xbb5Ub2bM17tgdOu5m/
QShDJGrEeGvxqJsGRWsc
=kS/C
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"The patch hitting the MMC/SD subsystem is fixing up my own mess when
moving semantics from MMC/SD over to gpiolib. Ulf is on vacation but I
managed to reach him on chat and obtain his ACK.
The other two are early-rc fixes that are not super serious but pretty
annoying so I'd like to get rid of them.
Summary:
- Get rid of some WARN_ON() from the ACPI code
- Staticize a symbol
- Fix MMC polarity detection"
* tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
mmc: core: don't override the CD GPIO level when "cd-inverted" is set
gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static
gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts
- Add support for Power Supply to AXP813
- Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
- Add support for UART to Exynos LPASS
- Fix-ups
- Use supplied MACROS; ti_am335x_tscadc
- Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
- Regmap changes; bd9571mwv, wm5110-tables
- Kconfig dependencies; MFD_AT91_USART
- Supply shared data for child-devices; madera-core
- Use new of_node_name_eq() API call; max77620, stmpe
- Use managed resources (devm_*); tps65218
- Comment descriptions; ingenic-tcu
- Coding style; madera-core
- Bug Fixes
- Fix section mismatches; twl-core, db8500-prcmu
- Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
- IRQ related fixes; tps6586x
- Ensure proper initialisation sequence; qcom_rpm
- Repair potential memory leak; cros_ec_dev
-----BEGIN PGP SIGNATURE-----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=BwG/
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support
- Add support for Power Supply to AXP813
- Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
- Add support for UART to Exynos LPASS
Fix-ups:
- Use supplied MACROS; ti_am335x_tscadc
- Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
- Regmap changes; bd9571mwv, wm5110-tables
- Kconfig dependencies; MFD_AT91_USART
- Supply shared data for child-devices; madera-core
- Use new of_node_name_eq() API call; max77620, stmpe
- Use managed resources (devm_*); tps65218
- Comment descriptions; ingenic-tcu
- Coding style; madera-core
Bug Fixes:
- Fix section mismatches; twl-core, db8500-prcmu
- Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
- IRQ related fixes; tps6586x
- Ensure proper initialisation sequence; qcom_rpm
- Repair potential memory leak; cros_ec_dev"
* tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
mfd: exynos-lpass: Enable UART module support
mfd: mc13xxx: Fix a missing check of a register-read failure
mfd: cros_ec: Add commands to control codec
mfd: madera: Remove spurious semicolon in while loop
mfd: rave-sp: Fix typo in rave_sp_checksum comment
mfd: ingenic-tcu: Fix bit field description in header
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
mfd: Use of_node_name_eq() for node name comparisons
mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
mfd: axp20x: Add supported cells for AXP803
mfd: axp20x: Re-align MFD cell entries
mfd: axp20x: Add AC power supply cell for AXP813
mfd: wm5110: Add missing ASRC rate register
mfd: qcom_rpm: write fw_version to CTRL_REG
mfd: tps6586x: Handle interrupts on suspend
mfd: madera: Add shared data for accessory detection
mfd: at91-usart: Add platform dependency
mfd: bd9571mwv: Add volatile register to make DVFS work
mfd: ab8500-core: Return zero in get_register_interruptible()
mfd: tmio: Typo s/use use/use/
...
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
An of_node_put is also needed when meson_probe_remote completes. This was
present at the recursive call, but not in the call from meson_drv_probe.
The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547372691-28324-4-git-send-email-Julia.Lawall@lip6.fr
Commit e657fcc clears cpu capability bit instead of using fake cpuid
value, the EXTD should always be off for PV guest without depending
on cpuid value. So remove the cpuid check in xen_read_msr_safe() to
always clear the X2APIC_ENABLE bit.
Signed-off-by: Talons Lee <xin.li@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
bio_alloc_bioset returns a bio pointer or NULL, so we can avoid storing
the returned data into a new variable.
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Comments on function __bfq_deactivate_entity contains two imprecise or
wrong statements:
1) The function performs the deactivation of the entity.
2) The function must be invoked only if the entity is on a service tree.
This commits replaces both statements with the correct ones:
1) The functions updates sched_data and service trees for the entity,
so as to represent entity as inactive (which is only part of the steps
needed for the deactivation of the entity).
2) The function must be invoked on every entity being deactivated.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Also set prime_handle_to_fd and prime_fd_to_handle to NULL,
so drm will not advertive DRM_PRIME_CAP_{IMPORT,EXPORT} to
userspace.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190110111545.26768-1-kraxel@redhat.com
The newly updated guest driver could program 0x21f0 via lri and srm,
without F_CMD_ACCESS flag cmd parser will stop parser reset cmd.
0x21f0 applies to BDW, SKL, KBL, BXT and CFL.
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Commit eea199b445 ("kbuild: remove unnecessary LEX_PREFIX and
YACC_PREFIX") removed the last users of this macro.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building using GCC 4.7 or older, -ffunction-sections & the -pg flag
used by ftrace are incompatible. This causes warnings or build failures
(where -Werror applies) such as the following:
arch/mips/generic/init.c:
error: -ffunction-sections disabled; it makes profiling impossible
This used to be taken into account by the ordering of calls to cc-option
from within the top-level Makefile, which was introduced by commit
90ad4052e8 ("kbuild: avoid conflict between -ffunction-sections and
-pg on gcc-4.7"). Unfortunately this was broken when the
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION cc-option check was moved to
Kconfig in commit e85d1d65cd ("kbuild: test dead code/data elimination
support in Kconfig"), because the flags used by this check no longer
include -pg.
Fix this by not allowing CONFIG_LD_DEAD_CODE_DATA_ELIMINATION to be
enabled at the same time as ftrace/CONFIG_FUNCTION_TRACER when building
using GCC 4.7 or older.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: e85d1d65cd ("kbuild: test dead code/data elimination support in Kconfig")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I accidentally dropped '*' in the previous renaming patch.
Revive it so that 'make mrproper' can clean the generated files.
Fixes: d86271af64 ("kconfig: rename generated .*conf-cfg to *conf-cfg")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software. Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique. Linus Torvalds argued:
"Do we actually need this?
I'd rather let it bitrot, and just let it return random versions. It
will just start again at 2.4.60, won't it?
Anybody who uses UNAME26 for a 5.x kernel might as well think it's
still 4.x. The user space is so old that it can't possibly care about
differences between 4.x and 5.x, can it?
The only thing that matters is that it shows "2.4.<largeenough>",
which it will do regardless"
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that also
includes a few longer-standing fixes (i.e. not recent regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons (maintainer out
sick, holidays, etc). There's a functional dependency in there such that
one platform (Altera's SoCFPGA) won't boot without one of the patches;
instead of reverting the patch that got merged, I looked at this set
and decided it was small enough that I'll pick it up anyway. If you
disagree I can revisit with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved
memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board, what
this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
+ A few more fixlets.
-----BEGIN PGP SIGNATURE-----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=qjfZ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that
also includes a few longer-standing fixes (i.e. not recent
regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons
(maintainer out sick, holidays, etc). There's a functional
dependency in there such that one platform (Altera's SoCFPGA) won't
boot without one of the patches; instead of reverting the patch
that got merged, I looked at this set and decided it was small
enough that I'll pick it up anyway. If you disagree I can revisit
with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches
PSCI-reserved memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board,
what this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
.. plus a few more fixlets"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
qcom-scm: Include <linux/err.h> header
gpio: pl061: handle failed allocations
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
arm64: defconfig: enable modules for amlogic s400 sound card
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
...
The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>
Fixes: 1f0f015151 ("drm/rockchip: Add support for Rockchip Soc RGB output interface")
Cc: stable@vger.kernel.org
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[added fixes and cc-stable]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-4-git-send-email-Julia.Lawall@lip6.fr
-----BEGIN PGP SIGNATURE-----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=aCB2
-----END PGP SIGNATURE-----
Merge tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- two regression fixes in clone/dedupe ioctls, the generic check
callback needs to lock extents properly and wait for io to avoid
problems with writeback and relocation
- fix deadlock when using free space tree due to block group creation
- a recently added check refuses a valid fileystem with seeding device,
make that work again with a quickfix, proper solution needs more
intrusive changes
* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Use real device structure to verify dev extent
Btrfs: fix deadlock when using free space tree due to block group creation
Btrfs: fix race between reflink/dedupe and relocation
Btrfs: fix race between cloning range ending at eof and writeback
Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in an
email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel is
moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise it
should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsRFA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynbgACfTY/rAZpWTgMdPDfoOmF+s/XHQXsAoJKZ+v+f
Tpkcw76Wo1ESpPLuT1u1
=W0D+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
an email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel
is moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise
it should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues"
* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: driver core: remove use of BUS_ATTR
sysfs: convert BUG_ON to WARN_ON
Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix up
some reported issues in the rtl8188eu driver and update the MAINTAINERS
file to point to Larry for this driver so he can get the bug reports
easier.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsPnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ympdgCfVGVVapWxNgyjKe0oZNFQpF+bMAsAoNXmPbcd
8ETJe7SzfNH6mjmnw80F
=LZmR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix
up some reported issues in the rtl8188eu driver and update the
MAINTAINERS file to point to Larry for this driver so he can get the
bug reports easier.
All have been in linux-next with no reported issues"
* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
MAINTAINERS: Add entry for staging driver r8188eu
Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed up
in 5.0-rc1. The second one resolves a number of reported issues with
the recent tty locking fixes that went into 5.0-rc1. Lots of people
have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsOzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8OACgg3KREaqF3vizmxVr3xzKk2xG7x0An28XJcYA
z95ZRO/BuSATH1kTM36D
=p+SA
-----END PGP SIGNATURE-----
Merge tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed
up in 5.0-rc1. The second one resolves a number of reported issues
with the recent tty locking fixes that went into 5.0-rc1. Lots of
people have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues"
* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
serial: lantiq: Do not swap register read/writes
Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsQMA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykM2wCgzC1E5NUpoCqPZHaYQ/0LNLm6SaEAoIbebWBo
rl39FeUBmPJLTmKD0pFX
=4K55
-----END PGP SIGNATURE-----
Merge tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues"
* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: storage: Remove outdated URL from MAINTAINERS
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
usbcore: Select only first configuration for non-UAC3 compliant devices
USB: storage: add quirk for SMI SM3350
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
-----BEGIN PGP SIGNATURE-----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=410H
-----END PGP SIGNATURE-----
Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
fix an important set of crediting (flow control) problems, and also
two problems in cifs_writepages, ddressing some large i/o and also
compounding issues"
* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
CIFS: Fix error paths in writeback code
CIFS: Move credit processing to mid callbacks for SMB3
CIFS: Fix credits calculation for cancelled requests
cifs: Fix potential OOB access of lock element array
cifs: Limit memory used by lock request calls to a page
cifs: move large array from stack to heap
CIFS: Do not hide EINTR after sending network packets
CIFS: Fix credit computation for compounded requests
CIFS: Do not set credits to 1 if the server didn't grant anything
CIFS: Fix adjustment of credits for MTU requests
cifs: Fix a tiny potential memory leak
cifs: Fix a debug message
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXDTOiBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwMnMAP9u9pJr0g6t/8NwiDNQGYIupFMQ
vH3hIUP7pwkELeN36AEAuFJG66r1Y96icDQCLn9x6vxwgTDmJGgGHM3CWEftsQI=
=vFwq
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into fixes
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXDjK7AAKCRALBhiOFHI7
1eZfAJ0X/MrjG/MB1NSlJ2kUGmBs5MnnswCdFZpNF4okkjtwyWoCoBsp9X3kUkw=
=vYNz
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 5.0
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: Olof Johansson <olof@lixom.net>
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
-----BEGIN PGP SIGNATURE-----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=KT88
-----END PGP SIGNATURE-----
Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes
Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add required includes into qcom_scm.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v8pH
-----END PGP SIGNATURE-----
Merge tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes
Qualcomm Driver Fixes for 5.0-rc1
* Add required includes into qcom_scm.h
* tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
qcom-scm: Include <linux/err.h> header
Signed-off-by: Olof Johansson <olof@lixom.net>
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iyBf
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
-----BEGIN PGP SIGNATURE-----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=zkaU
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v5.0
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
ARM: shmobile: fix build regressions
Signed-off-by: Olof Johansson <olof@lixom.net>
