CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.
v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)
Fixes: 4e53840fdf ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
On Braswell, under heavy stress, if we update the GGTT while
simultaneously accessing another region inside the GTT, we are returned
the wrong values. To prevent this we stop the machine to update the GGTT
entries so that no memory traffic can occur at the same time.
This was first spotted in
commit 5bab6f60cb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 23 18:43:32 2015 +0100
drm/i915: Serialise updates to GGTT with access through GGTT on Braswell
but removed again in forlorn hope with
commit 4509276ee8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Feb 20 12:47:18 2017 +0000
drm/i915: Remove Braswell GGTT update w/a
However, gem_concurrent_blit is once again only stable with the patch
applied and CI is detecting the odd failure in forked gem_mmap_gtt tests
(which smell like the same issue). Fwiw, a wide variety of CPU memory
barriers (around GGTT flushing, fence updates, PTE updates) and GPU
flushes/invalidates (between requests, after PTE updates) were tried as
part of the investigation to find an alternate cause, nothing comes
close to serialised GGTT updates.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105591
Testcase: igt/gem_concurrent_blit
Testcase: igt/gem_mmap_gtt/*forked*
References: 5bab6f60cb ("drm/i915: Serialise updates to GGTT with access through GGTT on Braswell")
References: 4509276ee8 ("drm/i915: Remove Braswell GGTT update w/a")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114211729.30352-1-chris@chris-wilson.co.uk
We have two classes of VM, global GTT and per-process GTT. In order to
allow ourselves the freedom to mix both along call chains, distinguish
the two classes with regards to their mutex and lockdep maps.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114215956.32266-1-chris@chris-wilson.co.uk
Currently Ironlake operates under the assumption that rpm awake (and its
error checking is disabled). As such, we have missed a few places where we
access registers without taking the rpm wakeref and thus trigger
warnings. intel_ips being one culprit.
As this involved adding a potentially sleeping rpm_get, we have to
rearrange the spinlocks slightly and so switch to acquiring a device-ref
under the spinlock rather than hold the spinlock for the whole
operation. To be consistent, we make the change in pattern common to the
intel_ips interface even though this adds a few more atomic operations
than necessary in a few cases.
v2: Sagar noted the mb around setting mch_dev were overkill as we only
need ordering there, and that i915_emon_status was still using
struct_mutex for no reason, but lacked rpm.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-21-chris@chris-wilson.co.uk
As the GT_IRQ power domain implies a wakeref, we can use it inplace of
our existing redundant rpm grab.
v2: Drop papering over forgetting to take the runtime wakeref in
selftests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-20-chris@chris-wilson.co.uk
As we only release each power well once, we assume that each transcoder
maps to a different domain. Complain if this is not so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-19-chris@chris-wilson.co.uk
Track where and when we acquire and release the power well for pps
access along the dp aux link, with a view to detecting if we leak any
wakerefs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-18-chris@chris-wilson.co.uk
On module load and unload, we grab the POWER_DOMAIN_INIT powerwells and
transfer them to the runtime-pm code. We can use our wakeref tracking to
verify that the wakeref is indeed passed from init to enable, and
disable to fini; and across suspend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-17-chris@chris-wilson.co.uk
The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk
Frequently, we use intel_runtime_pm_get/_put around a small block.
Formalise that usage by providing a macro to define such a block with an
automatic closure to scope the intel_runtime_pm wakeref to that block,
i.e. macro abuse smelling of python.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-15-chris@chris-wilson.co.uk
Track the temporary wakerefs used within the selftests so that leaks are
clear.
v2: Add a couple of coarse annotations for mock selftests as we now
loudly warn about the errors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-14-chris@chris-wilson.co.uk
Keep track of the temporary rpm wakeref used for panel backlight access,
so that we can cancel it immediately upon release and so more clearly
identify leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-13-chris@chris-wilson.co.uk
Keep track of the temporary rpm wakeref inside hotplug detection, so
that we can cancel it immediately upon release and so clearly identify
leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-12-chris@chris-wilson.co.uk
Keep track of the rpm wakeref used for framebuffer access so that we can
cancel upon release and so more clearly identify leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-11-chris@chris-wilson.co.uk
Keep track of the temporary rpm wakerefs used for user access to the
device, so that we can cancel them upon release and clearly identify any
leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-10-chris@chris-wilson.co.uk
Keep track of our acquired wakeref for interacting with the guc, so that
we can cancel it upon release and so clearly identify leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-9-chris@chris-wilson.co.uk
Track the wakeref used for temporary access to the device, and discard
it upon release so that leaks can be identified.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-8-chris@chris-wilson.co.uk
As debugfs has a simple pattern of taking a rpm wakeref around the user
access, we can track the local reference and drop it as soon as
possible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-6-chris@chris-wilson.co.uk
As sysfs has a simple pattern of taking a rpm wakeref around the user
access, we can track the local reference and drop it as soon as
possible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-5-chris@chris-wilson.co.uk
Keep hold of the local wakeref used in error handling, to cancel
the tracking upon release so that leaks can be identified.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-4-chris@chris-wilson.co.uk
Record the wakeref used for keeping the device awake as the GPU is
executing requests and be sure to cancel the tracking upon parking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-3-chris@chris-wilson.co.uk
The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
For regular builds, the compiler should be able to eliminate the unused
local variables and the program growth should be minimal. Fwiw, it came
out as a net improvement as gcc was able to refactor rpm_get and
rpm_get_if_in_use together,
v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual
mark up for smaller more targeted patches.
v3: Mention the cookie in Returns
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk
Everytime we take a wakeref, record the stack trace of where it was
taken; clearing the set if we ever drop back to no owners. For debugging
a rpm leak, we can look at all the current wakerefs and check if they
have a matching rpm_put.
v2: Use skip=0 for unwinding the stack as it appears our noinline
function doesn't appear on the stack (nor does save_stack_trace itself!)
v3: Allow rpm->debug_count to disappear between inspections and so
avoid calling krealloc(0) as that may return a ZERO_PTR not NULL! (Mika)
v4: Show who last acquire/released the runtime pm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-1-chris@chris-wilson.co.uk
The wait-for-idle used from within the shrinker_lock_uninterruptible
depends on the struct_mutex locking state being known and declared to
i915_request_wait(). As it is conceivable that we reach the vmap
notifier from underneath struct_mutex (and so keep on relying on the
mutex_trylock_recursive), we should not blindly call i915_request_wait.
In the process we can remove the dubious polling to acquire
struct_mutex, and simply act, or not, on a successful trylock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109164204.23935-2-chris@chris-wilson.co.uk
If the current process is being killed (it was interrupted with SIGKILL
or equivalent), it will not make any progress in page allocation and we
can abort performing the shrinking on its behalf. So we can use
mutex_lock_killable() instead (although this path should only be
reachable from kswapd currently).
Tvrtko pointed out that it should also be reachable from debugfs, which
he would prefer retain its interruptiblity. As a compromise, killable is a
step in the right direction!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109164204.23935-1-chris@chris-wilson.co.uk
If we find an incompletely setup vma inside the request/engine at the
time of a hang, it may not have vma->pages initialised, so skip
capturing the object before we iterate over NULL.
Spotted by Matthew in preparation for using unpinned vma to track engine
state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110111522.11023-1-chris@chris-wilson.co.uk
The only gen8+ platform that has the feature is BDW, but we don't define
the feature flag on any BDW platform and we only have partial support in
the gen8 path (irq enabling code, but no handler).
The only thing we could do in the irq handler is report the error
to userspace, but no one asked/cared about that since BDW was
released so it is relatively safe to assume that even if we added the
message no one would look at it. Just drop the dead code from the
driver instead.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109213147.16851-1-daniele.ceraolospurio@intel.com
commit 4a15c75c42 ("drm/i915: Introduce per-engine workarounds")
refactored the workaround code to have functions per-engine, but didn't
call any of them from logical_xcs_ring_init. Since we do have a non-RCS
workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call
intel_engine_init_workarounds for non-RCS engines.
Note that whitelist is still RCS-only.
v2: move the call to logical_ring_init (Chris)
Fixes: 4a15c75c42 ("drm/i915: Introduce per-engine workarounds")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-2-daniele.ceraolospurio@intel.com
By using the wa lists inside the live driver structures, we won't
catch issues where those are incorrectly setup or corrupted.
To cover this gap, update the workaround framework to allow saving the
wa lists to independent structures and use them in the selftests.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-1-daniele.ceraolospurio@intel.com
[tursulin: Fixup checkpatch whitespace complaint in memset.]
In the continual quest to reduce the amount of global work required when
submitting requests, replace i915_retire_requests() after allocation
failure to retiring just our ring.
v2: Don't forget the list iteration included an early break, so we would
never throttle on the last request in the ring/timeline.
v3: Use the common ring_retire_requests()
References: 11abf0c5a0 ("drm/i915: Limit the backpressure for i915_request allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109215932.26454-1-chris@chris-wilson.co.uk
Add support for PMIC MIPI sequences using the new
intel_soc_pmic_exec_mipi_pmic_seq_element function.
This fixes the DSI LCD panel not lighting up when not initialized by the
GOP (because an external monitor was connected) on GPD win and GPD pocket
devices.
Specifically the LCD panel seems to need GPIO pin 9 on the PMIC to be
driven high, which is done through a PMIC MIPI sequence. Before this commit
if the sequence was not executed by the GOP the pin would stay low causing
the LCD panel to not work. Having the MIPI sequences properly control this
GPIO should also help save some power when the panel is off.
Changes in v2, v3:
-Only changes to other patches in this patch-set
Changes in v4:
-Move decoding of the raw 15 bytes PMIC MIPI sequence element into
i2c-address, register-address, value and mask into the mipi_exec_pmic()
function instead of passing the raw data to
intel_soc_pmic_exec_mipi_pmic_seq_element()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-5-hdegoede@redhat.com
Needs just a few additional includes here and there.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com
If we haven't shipped and enabled firmware for a particular platform,
there is nothing the user can do about it. Don't scare the user with an
unactionable, unidentifiable warning!
<6> [310.769452] i915 0000:00:02.0: GuC: No firmware known for this platform!
<4> [310.769458] [drm] HuC: No firmware known for this platform!
Unify both GuC/HuC messages to include the device for which we lack the
firmware, and provide the platform name as an aide-memoire.
v2: Move and refine the message to common site of intel_uc_fw_fetch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108150246.1471-1-chris@chris-wilson.co.uk
Ignore trying to shrink from i915 if we fail to acquire the struct_mutex
in the shrinker while performing direct-reclaim. The trade-off being
(much) lower latency for non-i915 clients at an increased risk of being
unable to obtain a page from direct-reclaim without hitting the
oom-notifier. The proviso being that we still keep trying to hard
obtain the lock for kswapd so that we can reap under heavy memory
pressure.
v2: Taint all mutexes taken within the shrinker with the struct_mutex
subclass as an early warning system, and drop I915_SHRINK_ACTIVE from
vmap to reduce the number of dangerous paths. We also have to drop
I915_SHRINK_ACTIVE from oom-notifier to be able to make the same claim
that ACTIVE is only used from outside context, which fits in with a
longer strategy of avoiding stalls due to scanning active during
shrinking.
The danger in using the subclass struct_mutex is that we declare
ourselves more knowledgable than lockdep and deprive ourselves of
automatic coverage. Instead, we require ourselves to mark up any mutex
taken inside the shrinker in order to detect lock-inversion, and if we
miss any we are doomed to a deadlock at the worst possible moment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-1-chris@chris-wilson.co.uk
Generally catch up with 5.0-rc1, and specifically get the changes:
96d4f267e4 ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b ("i915: fix missing user_access_end() in page fault exception case")
594cc251fd ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=Jnao
-----END PGP SIGNATURE-----
Merge tag 'topic/drmp-cleanup-2019-01-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued
Make some drm headers self-contained with includes and forward
declarations.
This topic branch has already been merged to drm-misc-next as commit
1c95f662fc ("Merge tag 'topic/drmp-cleanup-2019-01-02' of
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next"). Now
merge it to drm-intel-next-queued to unblock some further drmP.h cleanup
without having to wait for a backmerge.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com
Include the total size of closed vma when reporting the per_ctx_stats of
debugfs/i915_gem_objects.
Whilst adjusting the context tracking, note that we can simply use our
list of contexts in i915->contexts rather than circumlocute via
dev->filelist and the per-file context idr, with the result that we can
show objects allocated to different vm (i.e. contexts within a file).
We change the output to show every context of each client, with its own
unique set of objects (for full-ppgtt machines, i.e. gen7+, for older
hardware all objects are in the global gtt and so can not be associated
with a single context). That should result in no loss of information,
and for gen7+, no duplication of active objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-2-chris@chris-wilson.co.uk
Haswell also requires the RING_IMR flush for its unique vebox setup to
avoid losing interrupts, as per 476af9c260 ("drm/i915/gen6: Flush
RING_IMR changes before changing the global GT IMR"):
On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.
References: 476af9c260 ("drm/i915/gen6: Flush RING_IMR changes before changing the global GT IMR")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105115647.4970-1-chris@chris-wilson.co.uk
CC [M] drivers/gpu/drm/i915/intel_device_info.o
drivers/gpu/drm/i915/intel_device_info.c:727: warning: Function parameter or member 'dev_priv' not described in 'intel_device_info_runtime_init'
drivers/gpu/drm/i915/intel_device_info.c:727: warning: Excess function parameter 'info' description in 'intel_device_info_runtime_init'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105014652.3472-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=hFld
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy New Year, just decloaking from leave to get some stuff from the
last week in before rc1:
core:
- two regression fixes for damage blob and atomic
i915 gvt:
- Some missed GVT fixes from the original pull
amdgpu:
- new PCI IDs
- SR-IOV fixes
- DC fixes
- Vega20 fixes"
* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
drm: Put damage blob when destroy plane state
drm: fix null pointer dereference on null state pointer
drm/amdgpu: Add new VegaM pci id
drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
drm/amdgpu: add Vega20 PSP ASD firmware loading
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
drm/amd/display: validate extended dongle caps
drm/amd/display: Use div_u64 for flip timestamp ns to ms
drm/amdgpu/uvd:Change uvd ring name convention
drm/amd/powerplay: add Vega20 LCLK DPM level setting support
drm/amdgpu: print process info when job timeout
drm/amdgpu/nbio7.4: add hw bug workaround for vega20
drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
drm/amd/display: Optimize passive update planes.
drm/amd/display: verify lane status before exiting verify link cap
drm/amd/display: Fix bug with not updating VSP infoframe
drm/amd/display: Add retry to read ddc_clock pin
drm/amd/display: Don't skip link training for empty dongle
drm/amd/display: Wait edp HPD to high in detect_sink
drm/amd/display: fix surface update sequence
...
- fix fbcon to not cause crash on unregister_framebuffer()
when there is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver
(Geert Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King,
Lubomir Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT
config option usage (FB_BACKLIGHT is for internal fbdev
subsystem use only)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rd5j
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.21' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"This time the pull request is really small.
The most notable changes are fixing fbcon to not cause crash on
unregister_framebuffer() operation when there is more than one
framebuffer, adding config option to center the bootup logo and making
FB_BACKLIGHT config option tristate (which in turn uncovered incorrect
FB_BACKLIGHT usage by DRM's nouveau driver).
Summary:
- fix fbcon to not cause crash on unregister_framebuffer() when there
is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver (Geert
Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir
Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config
option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)"
* tag 'fbdev-v4.21' of git://github.com/bzolnier/linux:
drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig
fbdev: fbcon: Fix unregister crash when more than one framebuffer
fbdev: Remove depends on HAS_DMA in case of platform dependency
pxa168fb: trivial typo fix
fbdev: fsl-diu: remove redundant null check on cmap
fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
fbdev: uvesafb: fix spelling mistake "memoery" -> "memory"
fbdev: fbmem: add config option to center the bootup logo
fbdev: fbmem: make fb_show_logo_line return the end instead of the height
video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data"
fbdev: fbmem: behave better with small rotated displays and many CPUs
video: clps711x-fb: release disp device node in probe()
fbdev: make FB_BACKLIGHT a tristate
udlfb: fix some inconsistent NULL checking
Our attempt to account for bit17 swizzling of pread/pwrite onto tiled
objects was flawed due to the simple fact that we do not always know the
swizzling for a particular page (due to the swizzling varying based on
location in certain unbalanced configurations). Furthermore, the
pread/pwrite paths are now unbalanced in that we are required to use the
GTT as in some cases we do not have direct CPU access to the backing
physical pages (thus some paths trying to account for the swizzle, but
others neglecting, chaos ensues).
There are no known users who do use pread/pwrite into a tiled object
(you need to manually detile anyway, so why now just use mmap and avoid
the copy?) and no user bug reports to indicate that it is being used in
the wild. As no one is hitting the buggy path, we can just remove the
buggy code.
v2: Just use the fault allowing kmap() + normal copy_(to|from)_user
v3: Avoid int overflow in computing 'length' from 'remain' (Tvrtko)
References: fe115628d5 ("drm/i915: Implement pwrite without struct-mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105120758.9237-1-chris@chris-wilson.co.uk
Originally, the rule used to be that you'd have to do access_ok()
separately, and then user_access_begin() before actually doing the
direct (optimized) user access.
But experience has shown that people then decide not to do access_ok()
at all, and instead rely on it being implied by other operations or
similar. Which makes it very hard to verify that the access has
actually been range-checked.
If you use the unsafe direct user accesses, hardware features (either
SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged
Access Never - on ARM) do force you to use user_access_begin(). But
nothing really forces the range check.
By putting the range check into user_access_begin(), we actually force
people to do the right thing (tm), and the range check vill be visible
near the actual accesses. We have way too long a history of people
trying to avoid them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
