We need to free "intent" and "intent->data" on a couple error paths.
Fixes: 933b45da5d ("rpmsg: glink: Add support for TX intents")
Acked-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If qcom_glink_tx() fails, then we need to unlock before returning the
error code.
Fixes: 27b9c5b66b ("rpmsg: glink: Request for intents when unavailable")
Acked-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The new switch cases for RPM_CMD_RX_DONE, RPM_CMD_RX_DONE_W_REUSE,
RPM_CMD_RX_INTENT_REQ_ACK, RPM_CMD_INTENT and RPM_CMD_RX_INTENT_REQ from
4 recent commits are not setting ret and so a later non-zero check on ret
is testing on a garbage value in ret. Fix this by initializing ret to zero.
Detected by CoverityScan CID#1455249 ("Uninitialized scalar variable")
Fixes: 933b45da5d ("rpmsg: glink: Add support for TX intents)
Fixes: dacbb35e93 ("glink: Receive and store the remote intent buffers")
Fixes: 27b9c5b66b ("rpmsg: glink: Request for intents when unavailable")
Fixes: 88c6060f5a ("rpmsg: glink: Handle remote rx done command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the case where glink->intentless is true and the call
to qcom_glink_tx fails then we have a condition where ret is
non-zero and intent is null, causing a null pointer deference
when setting intent->in_use to false. Add an extra check to
only dereference intent if intent is non-null.
Detected by: CoverityScan CID#1455247 ("Explicit null dereferenced")
Fixes: 88c6060f5a ("rpmsg: glink: Handle remote rx done command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The common code needs to export the probe and remove symbols in order
for the SMEM and RPM drivers to access them when compiled as a module.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The idr_lock should be released in the case that we don't find the given
channel.
Fixes: 44f6df922a ("rpmsg: glink: Fix idr_lock from mutex to spinlock")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Once the remote side sends a rx done ack, check for the intent reuse
information from it and suitably discard or reuse the remote passed
intent buffers.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
While sending data, we search for suitable sized intent to map and
simply fail if a intent is not found. Instead request for a intent of
required size and wait till one is alloted.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
While sending data, use the remote intent id buffer of suitable size
that was passed by remote previously.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Just like we allocating and sending intent ids to remote, remote side
allocates and sends us the intents as well. So save the intent ids and
use it later while sending data targeting the appropriate intents based
on the size.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Preallocate local intent buffers and pass the intent ids to the remote.
This way there are some default intents available for the remote to
start sending data without having to wait by sending intent requests. Do
this by adding the rpmsg announce_create ops, which gets called right
after the rpmsg device gets probed.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Send RX data receive ack to remote and also inform that local intent
buffer is used and freed. This informs the remote to request for next
set of intent buffers before doing a send operation.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To fully read the received rx data from FIFO both the command and data
has to be read. Currently we read command, data separately and process
them. By adding an offset parameter to RX FIFO peak accessor, command
and data can be read together, simplifying things. So introduce this.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
So previously on request from remote side, we allocated local intent
buffers and passed the ids to the remote. Now when we receive data
buffers from remote directed to that intent id, copy the data to the
corresponding preallocated intent buffer.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Intents are nothing but pre-allocated buffers of appropriate size that
are allocated on the local side and communicated to the remote side and
the remote stores the list of intent ids that it is informed.
Later when remote side is intenting to send data, it picks up a right
intent (based on the size) and sends the data buffer and the intent id.
Local side receives the data and copies it to the local intent buffer.
The whole idea is to avoid stalls on the transport for allocating
memory, used for copy based transports.
When the remote request to allocate buffers using CMD_RX_INTENT_REQ, we
allocate buffers of requested size, store the buffer id locally and also
communicate the intent id to the remote.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The channel members lcids, rcids synchronised using the idr_lock is
accessed in both atomic/non-atomic contexts. The readers are not
currently synchronised. That no correct, so add the readers as well
under the lock and use a spinlock.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
G-link supports a version number and feature flags for each transport.
A combination of the version number and feature flags enable/disable:
(*) G-Link software updates for each edge
(*) Individual features for each edge
Endpoints negotiate both the version and the supported flags when
the transport is opened and they cannot be changed after negotiation has
been completed.
Each full implementation of G-Link must support a minimum of the current
version, the previous version, and the base negotiation version called v0.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The glink protocol supports different types of transports (shared
memory). With the core protocol remaining the same, the way the
transport's memory is probed and accessed is different. So add support
for glink's smem based transports.
Adding a new smem transport register function and the fifo accessors for
the same.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
mbox_request_channel is done in probe, so free the channel in remove.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The TX FIFO can be full, if the remote client has not read enough data
(or) reading it slowly. So its nessecary to return -EAGAIN to the local
client to enable retry.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Glink protocol requires that each message is aligned on a 8 byte offset.
This is purely a restriction from glink, so in order to support clients
which do not adher to this, allow data packets of any size, but align
the head index accordingly, effectively removing the alignment
restriction.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move the common part of glink core protocol implementation to
glink_native.c that can be shared with the smem based glink
transport in the later patches.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There is quite some code common in glink_rpm_probe that can reused for
glink-smem based transport as well. So split the function and move the
code to glink_native_probe that can be used later when we add the
support for glink-smem based transport. Also reuse driver's remove as
well.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
With the intention of reusing the glink core protocol commands and code
across both rpm and smem based transports, the only thing different is
way of accessing the shared-memory of the transport (FIFO). So put the
fifo accessor's of the transport's pipe (rx/tx) behind indirections, so
that the rest of the code can be shared.
For this, have a qcom_glink_pipe that can be used in the common code
containing the indirections and wrap it with glink_rpm_pipe that
contains the transport specific members.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Renaming the glink_rpm_xx functions and structs to qcom_glink_xx
equivalents helps to reuse the core glink protocol while adding
support for smem based glink transport in the later patches.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To specify memory for remoteproc, we declare (dma_declare_coherent_memory())
an area which is ioremap'ed to the vmalloc area. However, this address is
not a kernel address so virt_addr_valid(buf) fails.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rpmsg buffer size is currently fixed to 512 bytes.
This patch introduces a new capability in struct virtproc_info
to tune shared buffer size between host and coprocessor
according to the needs.
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 8a228ecfe0 ("rpmsg: Indirection table for rpmsg_endpoint
operations") has made the rpmsg_send_offchannel_raw() a static
function and local to the virtio_rpmsg_bus module, but has not
dropped the corresponding EXPORT_SYMBOL. Fix this.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch assigns the device node to the edge device, so that the edge
device drivers could read required device tree properties.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This introduces the Qualcomm GLINK protocol driver and DeviceTree-based
modalias support, as well as a number of smaller fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZXXVMAAoJEAsfOT8Nma3FQQgP/3J8RiSyURi5EUKs59LBHQ6Z
hpQgsxa0idTY4AbS6phUiBMxyxSSJltGn/8hjlddixp/iiaqSv3z+d5zHRiyOsHt
TiOYkE5z8HvG/i/fA9+ZFCeTakqeq9qWhyYEJ0r1j49le4iWRPwQ0NGHxNhyTZJZ
dTPIC4C5FJPl5LEyeU5ZTzLTtPWZKu2+Ll5xB8vZz6qmU2aQMdX4XL30sbgdXB9y
Xg04AYTYrphoTLT7y7wKJ3/acZyJDZp+6kfr1mMvZttZiGZJLbaAN3+jlLvAqO25
NMZzTsBW6sCfWhh/v/IP7AVIYde6yzTfvcj7z9Z0RFb/QdFA691Y6dxLbJtSmVGR
FRCq739NKmvbe3l3xWdMSXOcSMZng534u/Ws/p6orUNzCrBHAcc0f9Qz5URIXo8R
tw5/IZwUurBDlAIJeBJM/AKWj75C7Wxuy1SUcG7ks3NyKejCM2Pl+Y2gwWOSXvJj
0slS1EnUmiypT5dR4IJXYni34eP0yfXtwfxHuUPZvcaLCpdbSMRULAubGpgcOOT0
d/lFv29UDudh7vxEqV2tEcEk5NVvcAuwsGytZddxFOGU1tCsrLa/BMBiiA3aKn5S
sS5puLXPwl3ndwQV8Kr+48LjepQ44UoVvlh9edZUKVcaeDUDRM7WOvPyVUE9Rc+C
UMPkHyvD/sYPaDRhXyTD
=rhfx
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v4.13' of git://github.com/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This introduces the Qualcomm GLINK protocol driver and
DeviceTree-based modalias support, as well as a number of smaller
fixes"
* tag 'rpmsg-v4.13' of git://github.com/andersson/remoteproc:
rpmsg: Make modalias work for DeviceTree based devices
rpmsg: Drop VIRTUALIZATION dependency from RPMSG_VIRTIO
rpmsg: Don't overwrite release op of rpdev
rpmsg: virtio_rpmsg_bus: cleanup multiple assignment to ops
rpmsg: virtio_rpmsg_bus: fix nameservice address
rpmsg: cleanup incorrect function in dev_err message
rpmsg: virtio_rpmsg_bus: fix announce for devices without endpoint
rpmsg: Introduce Qualcomm RPM glink driver
soc: qcom: Add device tree binding for GLINK RPM
rpmsg: Release rpmsg devices in backends
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
When rpmsg devices are expected to be matched based on their compatible
the modalias should reflect this, so that module autoloading has a
chance to match and load the appropriate module.
Tested-by: Rob Clark <robdclark@gmail.com>
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A dependency to VIRTUALIZATION has been added to RPMSG_VIRTIO (back
when it was named RPMSG) in v3.10 kernel in commit 397944df32
("rpmsg: fix kconfig dependencies for VIRTIO") to resolve Kconfig
warnings due to the inclusion of the virtio configuration file from
the ARM's KVM config file. The KVM config was fixed properly in the
subsequent release in commit 8bd4ffd6b3 ("ARM: kvm: don't include
drivers/virtio/Kconfig"). So, drop this unneeded VIRTUALIZATION
dependency from RPMSG_VIRTIO.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
b0b03b8119 ("rpmsg: Release rpmsg devices in backends") attempted to
correct the ownership of freeing rpmsg device memory. But the patch
is not complete, in that the rpmsg core will overwrite the release op as
the device is being registered.
Fixes: b0b03b8119 ("rpmsg: Release rpmsg devices in backends")
Reported-by: Henri Roosen <henri.roosen@ginzinger.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Trivial cleanup: the .ops pointer is assigned twice. This patch removes the
first assignment.
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 2a48d7322d ("rpmsg: rpmsg_send() operations takes rpmsg_endpoint")
only changed the nameservice address for virtio_rpmsg_announce_create() but
did not do the same change for virtio_rpmsg_announce_destroy().
Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Trivial cleanup for incorrect function in dev_err message
Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A device might not have an endpoint assigned. This patch checks if
rpdev->ept has a value before dereferencing or using it.
Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev_attrs field has long been "depreciated" and is finally being
removed, so move the driver to use the "correct" dev_groups field
instead for struct bus_type.
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: <linux-remoteproc@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a basic driver for communicating over "native glink"
with the RPM found in Qualcomm platforms.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A bunch of changes to virtio, most affecting virtio net.
ptr_ring batched zeroing - first of batching enhancements
that seems ready.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZEceWAAoJECgfDbjSjVRpg8YIAIbB1UJZkrHh/fdCQjM2O53T
ESS62W91LBT+weYH/N79RrfnGWzDOHrCQ8Or1nAKQZx2vU1aroqYXeJ9o0liRBYr
hGZB1/bg8obA5XkKUfME2+XClakvuXABUJbky08iDL9nILlrvIVLoUgZ9ouL0vTj
oUv4n6jtguNFV7tk/injGNRparEVdcefX0dbPxXomx5tSeD2fOE96/Q4q2eD3f7r
NHD4DailEJC7ndJGa6b4M9g8shkXzgEnSw+OJHpcJcxCnAzkVT94vsU7OluiDvmG
bfdGZNb0ohDYZLbJDR8aiMkoad8bIVLyGlhqnMBiZQEOF4oiWM9UJLvp5Lq9g7A=
=Sb7L
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Fixes, cleanups, performance
A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
batched zeroing - first of batching enhancements that seems ready."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
s390/virtio: change maintainership
tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
virtio_net: tidy a couple debug statements
ptr_ring: support testing different batching sizes
ringtest: support test specific parameters
ptr_ring: batch ring zeroing
virtio: virtio_driver doc
virtio_net: don't reset twice on XDP on/off
virtio_net: fix support for small rings
virtio_net: reduce alignment for buffers
virtio_net: rework mergeable buffer handling
virtio_net: allow specifying context for rx
virtio: allow extra context per descriptor
tools/virtio: fix build breakage
virtio: add context flag to find vqs
virtio: wrap find_vqs
ringtest: fix an assert statement
We are going to add more parameters to find_vqs, let's wrap the call so
we don't need to tweak all drivers every time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the standalone SMD implementation as we have transitioned the
client drivers to use the RPMSG based one.
Also remove all dependencies on QCOM_SMD from Kconfig files, in order to
keep them selectable in the absence of the removed symbol.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like a quiet cycle for vhost/virtio, just a couple of minor
tweaks. Most notable is automatic interrupt affinity for blk and scsi.
Hopefully other devices are not far behind.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYt1rRAAoJECgfDbjSjVRpEZsIALSHevdXWtRHBZUb0ZkqPLQb
/x2Vn49CcALS1p7iSuP9L027MPeaLKyr0NBT9hptBChp/4b9lnZWyyAo6vYQrzfx
Ia/hLBYsK4ml6lEwbyfLwqkF2cmYCrZhBSVAILifn84lTPoN7CT0PlYDfA+OCaNR
geo75qF8KR+AUO0aqchwMRL3RV3OxZKxQr2AR6LttCuhiBgnV3Xqxffg/M3x6ONM
0ffFFdodm6slem3hIEiGUMwKj4NKQhcOleV+y0fVBzWfLQG9210pZbQyRBRikIL0
7IsaarpaUr7OrLAZFMGF6nJnyRAaRrt6WknTHZkyvyggrePrGcmGgPm4jrODwY4=
=2zwv
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost updates from Michael Tsirkin:
"virtio, vhost: optimizations, fixes
Looks like a quiet cycle for vhost/virtio, just a couple of minor
tweaks. Most notable is automatic interrupt affinity for blk and scsi.
Hopefully other devices are not far behind"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-console: avoid DMA from stack
vhost: introduce O(1) vq metadata cache
virtio_scsi: use virtio IRQ affinity
virtio_blk: use virtio IRQ affinity
blk-mq: provide a default queue mapping for virtio device
virtio: provide a method to get the IRQ affinity mask for a virtqueue
virtio: allow drivers to request IRQ affinity when creating VQs
virtio_pci: simplify MSI-X setup
virtio_pci: don't duplicate the msix_enable flag in struct pci_dev
virtio_pci: use shared interrupts for virtqueues
virtio_pci: remove struct virtio_pci_vq_info
vhost: try avoiding avail index access when getting descriptor
virtio_mmio: expose header to userspace
Add a struct irq_affinity pointer to the find_vqs methods, which if set
is used to tell the PCI layer to create the MSI-X vectors for our I/O
virtqueues with the proper affinity from the start. Compared to after
the fact affinity hints this gives us an instantly working setup and
allows to allocate the irq descritors node-local and avoid interconnect
traffic. Last but not least this will allow blk-mq queues are created
based on the interrupt affinity for storage drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The parameter validation incorrectly returned an ERR_PTR(), which is not
handled by the callers to rpmsg_create_ept(), per the definition NULL
should be returned.
Fixes: 93e9324431 ("rpmsg: Handle invalid parameters in public API")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We should unlock before returning if skb_dequeue() returns a NULL.
Fixes: c0cdc19f84 ("rpmsg: Driver for user space endpoint interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Without CONFIG_NET, we get a build failure for the new driver:
ERROR: "skb_queue_tail" [drivers/rpmsg/rpmsg_char.ko] undefined!
ERROR: "skb_put" [drivers/rpmsg/rpmsg_char.ko] undefined!
ERROR: "__alloc_skb" [drivers/rpmsg/rpmsg_char.ko] undefined!
ERROR: "kfree_skb" [drivers/rpmsg/rpmsg_char.ko] undefined!
ERROR: "skb_dequeue" [drivers/rpmsg/rpmsg_char.ko] undefined!
This adds a dependency so we don't try to build the broken configuration.
Fixes: c0cdc19f84 ("rpmsg: Driver for user space endpoint interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
