For boards with bad VCE blocks, only configure the working
block.
v2: use the harvest info for pipe setup
v3: fix mask check as noted by Leo
v4: add dGPU support
Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This doesn't seem strictly necessary with Tonga right now, but that might
change with future power management enhancements.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Reviewed-and-Tested-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
So the selected forced level shows up properly in sysfs.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always respect the harvest configuration as is.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.
v2: fix logic as noted by Christian
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This is a translation of the patch ...
"drm/radeon: Handle irqs only based on irq ring, not irq status regs."
... for the vblank irq handling, to fix the same problem described
in that patch on the new driver.
Only compile tested due to lack of suitable hw.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
CC: Michel Dänzer <michel.daenzer@amd.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove unrelated whitespace change, fix C comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
And use common fence infrastructure for the wait.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
If the CONFIG_DEBUG_FS is not selected, compilation of the
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c provides two warnings that
amdgpu_debugfs_regs_init and amdgpu_debugfs_regs_cleanup are used but
never defined. And as result:
ERROR: "amdgpu_debugfs_regs_cleanup" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "amdgpu_debugfs_regs_init" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
^
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplication across asic families and make it symmetric
with the freeing of the code in amdgpu_device.c
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree(NULL) is safe and this check is probably not required
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kzalloc rather than kcalloc(1.. for allocating
one thing.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to resolve compute hang at resume time.
v2: (agd5f) squash in second fix
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We were doing it in the common code and in the IP specific code.
Remove the IP specific code. The common code handles the
ordering properly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
smu_init allocates buffers and initializes them. It does not
touch the hw. There is no need to do it again on resume. It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_init allocates buffers and initializes them. It does not
touch the hw. There is no need to do it again on resume. It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_init allocates buffers and initializes them. It does not
touch the hw. There is no need to do it again on resume. It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some leftover copy and pastes from radeon that never
got updated.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
