Fix kernel-doc warning in <linux/bitmap.h>:
include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'
Also fix small typo (bitnaps).
Link: http://lkml.kernel.org/r/0729ea7a-2c0d-b2c5-7dd3-3629ee0803e2@infradead.org
Fixes: b9fa6442f7 ("cpumask: Implement cpumask_or_equal()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warning in fs/libfs.c:
fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'
Link: http://lkml.kernel.org/r/5fc9d70b-e377-0ec9-066a-970d49579041@infradead.org
Fixes: ad2a722f19 ("libfs: Open code simple_commit_write into only user")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Boaz Harrosh <boazh@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warning in fs/direct-io.c:
fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'
Also, don't mark this function as having kernel-doc notation since it is
not exported.
Link: http://lkml.kernel.org/r/97908511-4328-4a56-17fe-f43a1d7aa470@infradead.org
Fixes: 6d544bb4d9 ("dio: centralize completion in dio_complete()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zach Brown <zab@zabbo.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian and Dave reported [1] a NULL pointer dereference in
__reset_isolation_pfn(). While the exact cause is unclear, staring at
the code revealed two bugs, which might be related.
One bug is that if zone starts in the middle of pageblock, block_page
might correspond to different pfn than block_pfn, and then the
pfn_valid_within() checks will check different pfn's than those accessed
via struct page. This might result in acessing an unitialized page in
CONFIG_HOLES_IN_ZONE configs.
The other bug is that end_page refers to the first page of next
pageblock and not last page of current pageblock. The online and valid
check is then wrong and with sections, the while (page < end_page) loop
might wander off actual struct page arrays.
[1] https://lore.kernel.org/linux-xfs/87o8z1fvqu.fsf@mid.deneb.enyo.de/
Link: http://lkml.kernel.org/r/20191008152915.24704-1-vbabka@suse.cz
Fixes: 6b0868c820 ("mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Florian Weimer <fw@deneb.enyo.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b39d0ee263 ("mm, page_alloc: avoid expensive reclaim when
compaction may not succeed") has chnaged the allocator to bail out from
the allocator early to prevent from a potentially excessive memory
reclaim. __GFP_RETRY_MAYFAIL is designed to retry the allocation,
reclaim and compaction loop as long as there is a reasonable chance to
make forward progress. Neither COMPACT_SKIPPED nor COMPACT_DEFERRED at
the INIT_COMPACT_PRIORITY compaction attempt gives this feedback.
The most obvious affected subsystem is hugetlbfs which allocates huge
pages based on an admin request (or via admin configured overcommit). I
have done a simple test which tries to allocate half of the memory for
hugetlb pages while the memory is full of a clean page cache. This is
not an unusual situation because we try to cache as much of the memory
as possible and sysctl/sysfs interface to allocate huge pages is there
for flexibility to allocate hugetlb pages at any time.
System has 1GB of RAM and we are requesting 515MB worth of hugetlb pages
after the memory is prefilled by a clean page cache:
root@test1:~# cat hugetlb_test.sh
set -x
echo 0 > /proc/sys/vm/nr_hugepages
echo 3 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/compact_memory
dd if=/mnt/data/file-1G of=/dev/null bs=$((4<<10))
TS=$(date +%s)
echo 256 > /proc/sys/vm/nr_hugepages
cat /proc/sys/vm/nr_hugepages
The results for 2 consecutive runs on clean 5.3
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 21.0694 s, 51.0 MB/s
+ date +%s
+ TS=1569905284
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
256
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 21.7548 s, 49.4 MB/s
+ date +%s
+ TS=1569905311
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
256
Now with b39d0ee263 applied
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 20.1815 s, 53.2 MB/s
+ date +%s
+ TS=1569905516
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
11
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 21.9485 s, 48.9 MB/s
+ date +%s
+ TS=1569905541
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
12
The success rate went down by factor of 20!
Although hugetlb allocation requests might fail and it is reasonable to
expect them to under extremely fragmented memory or when the memory is
under a heavy pressure but the above situation is not that case.
Fix the regression by reverting back to the previous behavior for
__GFP_RETRY_MAYFAIL requests and disable the beail out heuristic for
those requests.
Mike said:
: hugetlbfs allocations are commonly done via sysctl/sysfs shortly after
: boot where this may not be as much of an issue. However, I am aware of at
: least three use cases where allocations are made after the system has been
: up and running for quite some time:
:
: - DB reconfiguration. If sysctl/sysfs fails to get required number of
: huge pages, system is rebooted to perform allocation after boot.
:
: - VM provisioning. If unable get required number of huge pages, fall
: back to base pages.
:
: - An application that does not preallocate pool, but rather allocates
: pages at fault time for optimal NUMA locality.
:
: In all cases, I would expect b39d0ee263 to cause regressions and
: noticable behavior changes.
:
: My quick/limited testing in
: https://lkml.kernel.org/r/3468b605-a3a9-6978-9699-57c52a90bd7e@oracle.com
: was insufficient. It was also mentioned that if something like
: b39d0ee263 went forward, I would like exemptions for __GFP_RETRY_MAYFAIL
: requests as in this patch.
[mhocko@suse.com: reworded changelog]
Link: http://lkml.kernel.org/r/20191007075548.12456-1-mhocko@kernel.org
Fixes: b39d0ee263 ("mm, page_alloc: avoid expensive reclaim when compaction may not succeed")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure allocations from kmem_cache_alloc_bulk() and
kmem_cache_free_bulk() are properly initialized.
Link: http://lkml.kernel.org/r/20191007091605.30530-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
slab_alloc_node() already zeroed out the freelist pointer if
init_on_free was on. Thibaut Sautereau noticed that the same needs to
be done for kmem_cache_alloc_bulk(), which performs the allocations
separately.
kmem_cache_alloc_bulk() is currently used in two places in the kernel,
so this change is unlikely to have a major performance impact.
SLAB doesn't require a similar change, as auto-initialization makes the
allocator store the freelist pointers off-slab.
Link: http://lkml.kernel.org/r/20191007091605.30530-1-glider@google.com
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Thibaut Sautereau <thibaut@sautereau.fr>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A long time ago we fixed a similar deadlock in show_slab_objects() [1].
However, it is apparently due to the commits like 01fb58bcba ("slab:
remove synchronous synchronize_sched() from memcg cache deactivation
path") and 03afc0e25f ("slab: get_online_mems for
kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by
just reading files in /sys/kernel/slab which will generate a lockdep
splat below.
Since the "mem_hotplug_lock" here is only to obtain a stable online node
mask while racing with NUMA node hotplug, in the worst case, the results
may me miscalculated while doing NUMA node hotplug, but they shall be
corrected by later reads of the same files.
WARNING: possible circular locking dependency detected
------------------------------------------------------
cat/5224 is trying to acquire lock:
ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at:
show_slab_objects+0x94/0x3a8
but task is already holding lock:
b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (kn->count#45){++++}:
lock_acquire+0x31c/0x360
__kernfs_remove+0x290/0x490
kernfs_remove+0x30/0x44
sysfs_remove_dir+0x70/0x88
kobject_del+0x50/0xb0
sysfs_slab_unlink+0x2c/0x38
shutdown_cache+0xa0/0xf0
kmemcg_cache_shutdown_fn+0x1c/0x34
kmemcg_workfn+0x44/0x64
process_one_work+0x4f4/0x950
worker_thread+0x390/0x4bc
kthread+0x1cc/0x1e8
ret_from_fork+0x10/0x18
-> #1 (slab_mutex){+.+.}:
lock_acquire+0x31c/0x360
__mutex_lock_common+0x16c/0xf78
mutex_lock_nested+0x40/0x50
memcg_create_kmem_cache+0x38/0x16c
memcg_kmem_cache_create_func+0x3c/0x70
process_one_work+0x4f4/0x950
worker_thread+0x390/0x4bc
kthread+0x1cc/0x1e8
ret_from_fork+0x10/0x18
-> #0 (mem_hotplug_lock.rw_sem){++++}:
validate_chain+0xd10/0x2bcc
__lock_acquire+0x7f4/0xb8c
lock_acquire+0x31c/0x360
get_online_mems+0x54/0x150
show_slab_objects+0x94/0x3a8
total_objects_show+0x28/0x34
slab_attr_show+0x38/0x54
sysfs_kf_seq_show+0x198/0x2d4
kernfs_seq_show+0xa4/0xcc
seq_read+0x30c/0x8a8
kernfs_fop_read+0xa8/0x314
__vfs_read+0x88/0x20c
vfs_read+0xd8/0x10c
ksys_read+0xb0/0x120
__arm64_sys_read+0x54/0x88
el0_svc_handler+0x170/0x240
el0_svc+0x8/0xc
other info that might help us debug this:
Chain exists of:
mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(kn->count#45);
lock(slab_mutex);
lock(kn->count#45);
lock(mem_hotplug_lock.rw_sem);
*** DEADLOCK ***
3 locks held by cat/5224:
#0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8
#1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0
#2: b8ff009693eee398 (kn->count#45){++++}, at:
kernfs_seq_start+0x44/0xf0
stack backtrace:
Call trace:
dump_backtrace+0x0/0x248
show_stack+0x20/0x2c
dump_stack+0xd0/0x140
print_circular_bug+0x368/0x380
check_noncircular+0x248/0x250
validate_chain+0xd10/0x2bcc
__lock_acquire+0x7f4/0xb8c
lock_acquire+0x31c/0x360
get_online_mems+0x54/0x150
show_slab_objects+0x94/0x3a8
total_objects_show+0x28/0x34
slab_attr_show+0x38/0x54
sysfs_kf_seq_show+0x198/0x2d4
kernfs_seq_show+0xa4/0xcc
seq_read+0x30c/0x8a8
kernfs_fop_read+0xa8/0x314
__vfs_read+0x88/0x20c
vfs_read+0xd8/0x10c
ksys_read+0xb0/0x120
__arm64_sys_read+0x54/0x88
el0_svc_handler+0x170/0x240
el0_svc+0x8/0xc
I think it is important to mention that this doesn't expose the
show_slab_objects to use-after-free. There is only a single path that
might really race here and that is the slab hotplug notifier callback
__kmem_cache_shrink (via slab_mem_going_offline_callback) but that path
doesn't really destroy kmem_cache_node data structures.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html
[akpm@linux-foundation.org: add comment explaining why we don't need mem_hotplug_lock]
Link: http://lkml.kernel.org/r/1570192309-10132-1-git-send-email-cai@lca.pw
Fixes: 01fb58bcba ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path")
Fixes: 03afc0e25f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 37389167a2 ("mm, page_owner: keep owner info when freeing the
page") has introduced a flag PAGE_EXT_OWNER_ACTIVE to indicate that page
is tracked as being allocated. Kirril suggested naming it
PAGE_EXT_OWNER_ALLOCATED to make it more clear, as "active is somewhat
loaded term for a page".
Link: http://lkml.kernel.org/r/20190930122916.14969-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 8974558f49 ("mm, page_owner, debug_pagealloc: save and dump
freeing stack trace") enhanced page_owner to also store freeing stack
trace, when debug_pagealloc is also enabled. KASAN would also like to
do this [1] to improve error reports to debug e.g. UAF issues.
Kirill has suggested that the freeing stack trace saving should be also
possible to be enabled separately from KASAN or debug_pagealloc, i.e.
with an extra boot option. Qian argued that we have enough options
already, and avoiding the extra overhead is not worth the complications
in the case of a debugging option. Kirill noted that the extra stack
handle in struct page_owner requires 0.1% of memory.
This patch therefore enables free stack saving whenever page_owner is
enabled, regardless of whether debug_pagealloc or KASAN is also enabled.
KASAN kernels booted with page_owner=on will thus benefit from the
improved error reports.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=203967
[vbabka@suse.cz: v3]
Link: http://lkml.kernel.org/r/20191007091808.7096-3-vbabka@suse.cz
Link: http://lkml.kernel.org/r/20190930122916.14969-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Qian Cai <cai@lca.pw>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "followups to debug_pagealloc improvements through
page_owner", v3.
These are followups to [1] which made it to Linus meanwhile. Patches 1
and 3 are based on Kirill's review, patch 2 on KASAN request [2]. It
would be nice if all of this made it to 5.4 with [1] already there (or
at least Patch 1).
This patch (of 3):
As noted by Kirill, commit 7e2f2a0cd1 ("mm, page_owner: record page
owner for each subpage") has introduced an off-by-one error in
__set_page_owner_handle() when looking up page_ext for subpages. As a
result, the head page page_owner info is set twice, while for the last
tail page, it's not set at all.
Fix this and also make the code more efficient by advancing the page_ext
pointer we already have, instead of calling lookup_page_ext() for each
subpage. Since the full size of struct page_ext is not known at compile
time, we can't use a simple page_ext++ statement, so introduce a
page_ext_next() inline function for that.
Link: http://lkml.kernel.org/r/20190930122916.14969-2-vbabka@suse.cz
Fixes: 7e2f2a0cd1 ("mm, page_owner: record page owner for each subpage")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Reported-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__get_user_[no]check uses temporary buffer of type long to store result
of __get_user_size and do sign extension on it when necessary. This
doesn't work correctly for 64-bit data. Fix it by moving temporary
buffer/sign extension logic to __get_user_asm.
Don't do assignment of __get_user_bad result to (x) as it may not always
be integer-compatible now and issue warning even when it's going to be
optimized. Instead do (x) = 0; and call __get_user_bad separately.
Zero initialize __x in __get_user_asm and use '+' constraint for its
assembly argument, so that its value is preserved in error cases. This
may add at most 1 cycle to the fast path, but saves an instruction and
two padding bytes in the fixup section for each use of this macro and
works for both misaligned store and store exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Numeric assembly arguments are hard to understand and assembly code that
uses them is hard to modify. Use named arguments in __check_align_*,
__get_user_asm and __put_user_asm. Modify macro parameter names so that
they don't affect argument names. Use '+' constraint for the [err]
argument instead of having it as both input and output.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
A BIO based request queue does not have a tag_set, which prevent testing
for the flag BLK_MQ_F_NO_SCHED indicating that the queue does not
require an elevator. This leads to an incorrect initialization of a
default elevator in some cases such as BIO based null_blk
(queue_mode == BIO) with zoned mode enabled as the default elevator in
this case is mq-deadline instead of "none".
Fix this by testing for a NULL queue mq_ops field which indicates that
the queue is BIO based and should not have an elevator.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This breaks booting from sata_sil24 with the recent DMA change.
According to James Bottomley this was in to improve performance by
kicking the device into 32 bit descriptors, which are usually more
efficient, especially with older dual descriptor format cards like we
have on parisc systems.
Remove it for now to make DMA working again.
Fixes: dcc02c19cc ("sata_sil24: use dma_set_mask_and_coherent")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Sven noticed that calling ioremap() and iounmap() multiple times leads
to a vmap memory leak:
vmap allocation for size 4198400 failed:
use vmalloc=<size> to increase size
It seems we missed calling vunmap() in iounmap().
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org> # v3.16+
Before reading the Extended Size field, we should ensure it fits in
the DMI record. There is already a record length check but it does
not cover that field.
It would take a seriously corrupted DMI table to hit that bug, so no
need to worry, but we should still fix it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6deae96b42 ("firmware, DMI: Add function to look up a handle and return DIMM size")
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Remove a confusing comment on our local_flush_tlb_all()
implementation. Per an internal discussion with Andrew, while it's
true that the fence.i is not necessary, it's not the case that an
sfence.vma implies a fence.i. We also drop the section about
"flush[ing] the entire local TLB" to better align with the language in
section 4.2.1 "Supervisor Memory-Management Fence Instruction" of the
RISC-V Privileged Specification v20190608.
Fixes: c901e45a99 ("RISC-V: `sfence.vma` orderes the instruction cache")
Reported-by: Alan Kao <alankao@andestech.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Add a default "stdout-path" to the kernel DTS file, as is present in many
of the board DTS files elsewhere in the kernel tree. With this line
present, earlyconsole can be enabled by simply passing "earlycon" on the
kernel command line. No specific device details are necessary, since the
kernel will use the stdout-path as the default.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Three feature registers were declared but never actually read from the
GPU. Add THREAD_MAX_THREADS, THREAD_MAX_WORKGROUP_SIZE and
THREAD_MAX_BARRIER_SIZE so that the complete set are available.
Fixes: 4bced8bea0 ("drm/panfrost: Export all GPU feature registers")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014151515.13839-1-steven.price@arm.com
First of all, on short copies __copy_{to,from}_user() return the amount
of bytes left uncopied, *not* -EFAULT. get_user() and put_user() are
expected to return -EFAULT on failure.
Another problem is get_user(v32, (__u64 __user *)p); that should
fetch 64bit value and the assign it to v32, truncating it in process.
Current code, OTOH, reads 8 bytes of data and stores them at the
address of v32, stomping on the 4 bytes that follow v32 itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- Add retrigger support to Amazon's al-fic driver
- Add SAM9X60 support to Atmel's AIC5 irqchip
- Fix GICv3 maximum interrupt calculation
- Convert SiFive's PLIC to the fasteoi IRQ flow
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl2TG74PHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDaCsQAJNOv7mE6d52LPA5e9Vx/HP2shKjTNdpyD4C
vi5tE7bvQ7VKZuoQ7S7zF3RrrG4z/Fth7Qe0v2T+2OecXBlejB64z642CIY0aVhh
SPWf1pUimHCosQnY2xEi/8Db6i0ZzlaYo5FlhTK+OKnaEuhXdoGVRVxyk+AhSq5n
jruA+GO/V2OfbbEkmXwJViEF6w0jzuQEaJIm9M2Z0S5QG3tsnC2+OrsBDJZqxT9/
7Jvx6IB/dk3yuQC7byT7bBLlEnw8nPe8yVua8N8LtTiZi/JjpfIl3qgXJx/h9iyc
jkuOZn2GpWwzi/i6SFQLTVKxeChqPTa61tTX67Y4LnCF8iOhzNY/Ev9OqLztTW+J
tVYaW6zp/shKOze1GmDXcG/9OMgQ7prR05nK2hnbGaI+dRHiw+zvgS0Sd6pPilDx
V/FtdCCD3JkKUgu+O6qBkJZb1RXbwGs7RdpkWHaxuYu3F47lGkoWpKPc689DWXyI
FL9bqcr3i4hPfWn4a/fVjYBvov91SCWRLWhhB5ViZ59ldE7WG2A5g62X9f6+mUk8
PrPFT0eldnCzeEf81suj7X0Phv8ftzigTm9ByJh8AV1/uuBi+AKjsYxDsp7CxMPj
9YYozRHakyp0c9hpwXRjozlVGKC6JpZLBBFga5+zI62IoIdEJCdnGFfdbxcqPRJE
oCXSSXXG
=AV7P
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Add retrigger support to Amazon's al-fic driver
- Add SAM9X60 support to Atmel's AIC5 irqchip
- Fix GICv3 maximum interrupt calculation
- Convert SiFive's PLIC to the fasteoi IRQ flow
In case of an error (e.g. memory pool too small), kmemleak disables
itself and cleans up the already allocated metadata objects. However, if
this happens early before the RCU callback mechanism is available,
put_object() skips call_rcu() and frees the object directly. This is not
safe with the RCU list traversal in __kmemleak_do_cleanup().
Change the list traversal in __kmemleak_do_cleanup() to
list_for_each_entry_safe() and remove the rcu_read_{lock,unlock} since
the kmemleak is already disabled at this point. In addition, avoid an
unnecessary metadata object rb-tree look-up since it already has the
struct kmemleak_object pointer.
Fixes: c566586818 ("mm: kmemleak: use the memory pool for early allocations")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The access to sk->sk_ll_usec should be hidden behind
CONFIG_NET_RX_BUSY_POLL like the definition of sk_ll_usec.
Put access to ->sk_ll_usec behind CONFIG_NET_RX_BUSY_POLL.
Fixes: 1a9460cef5 ("nvme-tcp: support simple polling")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Prevent simultaneous controller disabling/enabling tasks from interfering
with each other through a function to wait until the task successfully
transitioned the controller to the RESETTING state. This ensures disabling
the controller will not be interrupted by another reset path, otherwise
a concurrent reset may leave the controller in the wrong state.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A paused controller is doing critical internal activation work in the
background. Prevent subsequent controller resets from occurring during
this period by setting the controller state to RESETTING first. A helper
function, nvme_try_sched_reset_work(), is introduced for these paths so
they may continue with scheduling the reset_work after they've completed
their uninterruptible critical section.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A controller in the resetting state has not yet completed its recovery
actions. The pci and fc transports were already handling this, so update
the remaining transports to not attempt additional recovery in this
state. Instead, just restart the request timer.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The admin only state was intended to fence off actions that don't
apply to a non-IO capable controller. The only actual user of this is
the scan_work, and pci was the only transport to ever set this state.
The consequence of having this state is placing an additional burden on
every other action that applies to both live and admin only controllers.
Remove the admin only state and place the admin only burden on the only
place that actually cares: scan_work.
This also prepares to make it easier to temporarily pause a LIVE state
so that we don't need to remember which state the controller had been in
prior to the pause.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If a controller becomes degraded after a reset, we will not be able to
perform any IO. We currently teardown previously created request
queues and namespaces, but we had kept the unusable tagset. Free
it after all queues using it have been released.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Followup to commit dd2261ed45 ("hrtimer: Protect lockless access
to timer->base")
lock_hrtimer_base() fetches timer->base without lock exclusion.
Compiler is allowed to read timer->base twice (even if considered dumb)
which could end up trying to lock migration_base and return
&migration_base.
base = timer->base;
if (likely(base != &migration_base)) {
/* compiler reads timer->base again, and now (base == &migration_base)
raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
if (likely(base == timer->base))
return base; /* == &migration_base ! */
Similarly the write sides must use WRITE_ONCE() to avoid store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008173204.180879-1-edumazet@google.com
For APIC case of interrupt we don't fail a ->probe() of the driver,
which makes kernel to print a lot of warnings from the children.
We have two options here:
- switch to platform_get_irq_optional(), though it won't stop children
to be probed and failed
- fail the ->probe() of i2c-multi-instantiate
Since the in reality we never had devices in the wild where IRQ resource
is optional, the latter solution suits the best.
Fixes: 799d3379a6 ("platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
We should not add the BO to the swap LRU when the new mem is fixed and
the TTM object about to be destroyed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Link: https://patchwork.freedesktop.org/patch/335246/
Commit 4daa4fba3a ("gpu: drm: ttm: Adding new return type vm_fault_t")
broke TTM prefaulting. Since vmf_insert_mixed() typically always returns
VM_FAULT_NOPAGE, prefaulting stops after the second PTE.
Restore (almost) the original behaviour. Unfortunately we can no longer
with the new vm_fault_t return type determine whether a prefaulting
PTE insertion hit an already populated PTE, and terminate the insertion
loop. Instead we continue with the pre-determined number of prefaults.
Fixes: 4daa4fba3a ("gpu: drm: ttm: Adding new return type vm_fault_t")
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/330387/
The busy BO might actually be already deleted,
so grab only a list reference.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/332877/
(kvalo: cherry picked from commit 1340cc631b in
wireless-drivers-next to wireless-drivers as this a frequently reported
regression)
Bad latency is found on QCA988x, the issue was introduced by
commit 4504f0e5b5 ("ath10k: sdio: workaround firmware UART
pin configuration bug"). If uart_pin_workaround is false, this
change will set uart pin even if uart_print is false.
Tested HW: QCA9880
Tested FW: 10.2.4-1.0-00037
Fixes: 4504f0e5b5 ("ath10k: sdio: workaround firmware UART pin configuration bug")
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
- Removed locked down from tracefs itself and moved it to the trace
directory. Having the open functions there do the lockdown checks.
- Fixed a few races with opening an instance file and the instance being
deleted (Discovered during the locked down updates). Kept separate
from the clean up code such that they can be backported to stable
easier.
- Cleaned up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fixed a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXaNhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quDIAP4v08ARNdIh+r+c4AOBm3xsOuE/d9GB
I56ydnskm+x2JQD6Ap9ivXe9yDBIErFeHNtCoq7pM8YDI4YoYIB30N0GfwM=
=7oAu
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:
- Remove lockdown from tracefs itself and moved it to the trace
directory. Have the open functions there do the lockdown checks.
- Fix a few races with opening an instance file and the instance
being deleted (Discovered during the lockdown updates). Kept
separate from the clean up code such that they can be backported to
stable easier.
- Clean up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fix a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq"
* tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
pSeries machines on POWER9 processors can run with the XICS (legacy)
interrupt mode or with the XIVE exploitation interrupt mode. These
interrupt contollers have different interfaces for interrupt
management : XICS uses hcalls and XIVE loads and stores on a page.
H_EOI being a XICS interface the enable_scrq_irq() routine can fail
when the machine runs in XIVE mode.
Fix that by calling the EOI handler of the interrupt chip.
Fixes: f23e0643cd ("ibmvnic: Clear pending interrupt after device reset")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
__lpc_eth_shutdown is called after __lpc_eth_reset but it is already
calling __lpc_eth_reset. Avoid resetting the IP twice.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: address KCSAN reports in tcp_poll() (part I)
This all started with a KCSAN report (included
in "tcp: annotate tp->rcv_nxt lockless reads" changelog)
tcp_poll() runs in a lockless way. This means that about
all accesses of tcp socket fields done in tcp_poll() context
need annotations otherwise KCSAN will complain about data-races.
While doing this detective work, I found a more serious bug,
addressed by the first patch ("tcp: add rcu protection around
tp->fastopen_rsk").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For the sake of tcp_poll(), there are few places where we fetch
sk->sk_wmem_queued while this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make sure write
sides use corresponding WRITE_ONCE() to avoid store-tearing.
sk_wmem_queued_add() helper is added so that we can in
the future convert to ADD_ONCE() or equivalent if/when
available.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the sake of tcp_poll(), there are few places where we fetch
sk->sk_sndbuf while this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make sure write
sides use corresponding WRITE_ONCE() to avoid store-tearing.
Note that other transports probably need similar fixes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the sake of tcp_poll(), there are few places where we fetch
sk->sk_rcvbuf while this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make sure write
sides use corresponding WRITE_ONCE() to avoid store-tearing.
Note that other transports probably need similar fixes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There two places where we fetch tp->urg_seq while
this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make
sure write side use corresponding WRITE_ONCE() to avoid
store-tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
