Disable i2c mux for supported 9xxx chips. This is a
pre-requesite for controling 9xxx magnetometer using the
i2c master of the chip.
Check in device-tree that there is no i2c-gate device declared
for ensuring backward compatibility with existing setups.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver supports 14-bits and 16-bits devices. All of them have a 14-bit
configuration registers. All SPI trasfers, for reading AD conversion
results and for writing the configuration register, fit in two bytes.
The driver always uses 4-bytes xfers which seems at least pointless (maybe
even harmful). This patch trims the SPI xfer len and the buffer size to
two bytes.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.
For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.
The driver was slightly reworked. The preenable hook was moved to the
postenable, to add some symmetry to the postenable/predisable part.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding missing indio_dev->dev.of_node references so that, in case multiple
max31856 are present, users can get some clues to being able to distinguish
each of them. While at it, add also the missing parent reference.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable clear on read feature for latched interrupts. This bit allows
immediately clearing the latched interrupts of an event detection upon
the read of the corresponding status register.
It must be set to 1 together with LIR.
This feature is available just on LSM6DS0/LSM6DSR/ASM330LHH
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Enable Latched interrupt by default for sensor events
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The device could be configured to spit out also the configuration word
while reading the AD result value (in the same SPI xfer) - this is called
"readback" in the device datasheet.
The driver checks if readback is enabled and it eventually adjusts the SPI
xfer length and it applies proper shifts to still get the data, discarding
the configuration word.
The readback option is actually never enabled (the driver disables it), so
the said checks do not serve for any purpose.
Since enabling the readback option seems not to provide any advantage (the
driver entirely sets the configuration word without relying on any default
value), just kill the said, unused, code.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
'#include<linux/gpio.h>' isn't being used anywhere. Remove it.
Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.
This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):
drivers/iio/light/bh1750.c:64:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Related to commit 3a11fbb037 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the ADC hardware present on Ingenic JZ4770 SoC.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce support for AUX2 channel found in ADC hardware present on
Ingenic JZ4770 SoC.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a compatible string for the ADC controller present on
Ingenic JZ4770 SoC.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Variable ret is being assigned a value that is never read and
is being re-assigned a little later on. The assignment is redundant
and hence can be removed.
Addresses-Coverity: ("Ununsed value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch will add a system calibration attribute for each channel. Using
this option the user will have the ability to calibrate each channel for
zero scale and full scale. It uses the iio_chan_spec_ext_info and IIO_ENUM
to implement the functionality.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch exports the ad_sd_calibrate function in order to be able to
call it from outside ad_sigma_delta.
There are cases where the option to calibrate one channel at a time is
necessary (ex. system calibration for zero scale and full scale).
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add initial ABI documentation for ad7192 adc sysfs interfaces.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The commit 473d12f763
("iio: hid-sensor-attributes: Convert to use int_pow()")
converted to use generic int_pow() helper. Though, the generic one returns
64-bit value and, in cases when it is used as divisor, it compels 64-bit
division from compiler.
In order to fix this, introduce a temporary 32-bit variable to hold the result
of int_pow() and use it as divisor afterwards.
In couple of cases, replace int_pow() with a predefined unit factors for time
and frequency.
Fixes: 473d12f763 ("iio: hid-sensor-attributes: Convert to use int_pow()")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20190905112759.13035-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph said [1], "I'd much prefer to just use
read_cache_page_gfp, and live with the fact that this
allocates bufferheads behind you for now. I'll try to
speed up my attempts to get rid of the buffer heads on
the block device mapping instead. "
This simplifies the code a lot and a minor thing is
"no REQ_META (e.g. for blktrace) on metadata at all..."
[1] https://lore.kernel.org/r/20190903153704.GA2201@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-26-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph said [1], "This seems to be your only direct
use of buffer heads, which while not deprecated are a bit
of an ugly step child. So if you can easily avoid creating
a buffer_head dependency in a new filesystem I think you
should avoid it. "
[1] https://lore.kernel.org/r/20190902125109.GA9826@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-24-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add prefix "erofs_" to these functions and print
sb->s_id as a prefix to erofs_{err, info} so that
the user knows which file system is affected.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-23-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph said [1],
"vm_map_ram is supposed to generally behave better. So if
it doesn't please report that that to the arch maintainer
and linux-mm so that they can look into the issue. Having
user make choices of deep down kernel internals is just
a horrible interface.
Please talk to maintainers of other bits of the kernel
if you see issues and / or need enhancements. "
Let's redo the previous conclusion and kill the vmap
approach.
[1] https://lore.kernel.org/r/20190830165533.GA10909@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-21-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph pointed out [1], "
Why is there __submit_bio which really just obsfucates
what is going on? Also why is __submit_bio using
bio_set_op_attrs instead of opencode it as the comment
right next to it asks you to? "
Let's use submit_bio directly instead.
[1] https://lore.kernel.org/r/20190830162812.GA10694@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-18-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph pointed out [1],
"Why is there __erofs_get_meta_page with the two weird
booleans instead of a single erofs_get_meta_page that
gets and gfp_t for additional flags and an unsigned int
for additional bio op flags."
And since all callers can handle errors, let's kill
prio and nofail and erofs_get_inline_page() now.
[1] https://lore.kernel.org/r/20190830162812.GA10694@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-17-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph said [1] "having this function seems
entirely pointless", let's kill those.
filesystem function name
ext2,f2fs,ext4,isofs,squashfs,cifs,... init_inodecache
In addition, add a necessary "rcu_barrier()" on exit_fs();
[1] https://lore.kernel.org/r/20190829101545.GC20598@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-9-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph said, "This looks like a really obsfucated
way to write:
return datamode == EROFS_INODE_FLAT_COMPRESSION ||
datamode == EROFS_INODE_FLAT_COMPRESSION_LEGACY; "
Although I had my own consideration, it's the right way for now.
[1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-6-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Christoph suggested "Please don't add __packed" [1],
remove all __packed except struct erofs_dirent here.
Note that all on-disk fields except struct erofs_dirent
(12 bytes with a 8-byte nid) in EROFS are naturally aligned.
[1] https://lore.kernel.org/r/20190829095954.GB20598@infradead.org/
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190904020912.63925-5-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following checkpatch warning:
"WARNING: void function return statements are not generally useful"
Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Link: https://lore.kernel.org/r/20190904210631.13599-1-leandrohr@riseup.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kfree has taken the null check in account. hence it is unnecessary to add the
null check before kfree the object. Just remove it.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1567591408-24268-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
