Commit Graph

276811 Commits

Author SHA1 Message Date
Stanislaw Gruszka
68acc4afb0 iwlegacy: 3945: fix hw passive scan on radar channels
Patch fix firmware error on "iw dev wlan0 scan passive" for
hardware scanning (with disable_hw_scan=0 module parameter).

 iwl3945 0000:03:00.0: Microcode SW error detected. Restarting 0x82000008.
 iwl3945 0000:03:00.0: Loaded firmware version: 15.32.2.9
 iwl3945 0000:03:00.0: Start IWL Error Log Dump:
 iwl3945 0000:03:00.0: Status: 0x0002A2E4, count: 1
 iwl3945 0000:03:00.0: Desc       Time       asrtPC blink2 ilink1  nmiPC   Line
 iwl3945 0000:03:00.0: SYSASSERT     (0x5) 0041263900 0x13756 0x0031C 0x00000 764
 iwl3945 0000:03:00.0: Error Reply type 0x000002FC cmd C_SCAN (0x80) seq 0x443E ser 0x00340000
 iwl3945 0000:03:00.0: Command C_SCAN failed: FW Error
 iwl3945 0000:03:00.0: Can't stop Rx DMA.

We have disable ability to change passive scanning to active on
particular channel when traffic is detected on that channel. Otherwise
firmware will report error, when we try to do passive scan on radar
channels.

Reported-and-debugged-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:45 -05:00
Stanislaw Gruszka
81fb461395 iwlegacy: 3945: simplify calculations of retry limit
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:45 -05:00
Stanislaw Gruszka
5d0bef903a iwlegacy: random 3945-rs.c cleanups
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:45 -05:00
Stanislaw Gruszka
5bf0dac47f iwlegacy: 4965: remove one il4965_hdl_beacon
We have two such functions.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:45 -05:00
Stanislaw Gruszka
280ade5ea9 iwlegacy: 3945: get rid of hw_{set,get}_rate
Remove these helpers, some are not unused at all, one can be
unrolled in place of use.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:44 -05:00
Stanislaw Gruszka
616107ed81 iwlegacy: 4965: small tx_cmd build cleanup
Get rid of two inline functions related and simplify a bit
rts_retry_limit calculations.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:44 -05:00
Stanislaw Gruszka
a0c1ef3b12 iwlegacy: 4965: toggle tx antenna inline
Make function static and change antenna number inline.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:44 -05:00
Stanislaw Gruszka
17d4eca643 iwlegacy: move some i/o helpers out of inline
This save us about 20k of text size, and should have no impact on
performance as hot paths do not use much I/O.

Before:
   text	   data	    bss	    dec	    hex	filename
 108512	   1784	    168	 110464	  1af80	drivers/net/wireless/iwlegacy/iwl3945.ko
 165730	   2164	    156	 168050	  29072	drivers/net/wireless/iwlegacy/iwl4965.ko
  91942	    328	     48	  92318	  1689e	drivers/net/wireless/iwlegacy/iwlegacy.ko

After:
   text	   data	    bss	    dec	    hex	filename
  95556	   1784	    168	  97508	  17ce4	drivers/net/wireless/iwlegacy/iwl3945.ko
 154853	   2164	    156	 157173	  265f5	drivers/net/wireless/iwlegacy/iwl4965.ko
  91634	    328	     48	  92010	  1676a	drivers/net/wireless/iwlegacy/iwlegacy.ko

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:44 -05:00
Dan Carpenter
d71be93720 iwlegacy: off by one in iwl3945_hw_build_tx_cmd_rate()
We use "rate_index" like this:
	rate = iwl3945_rates[rate_index].plcp;
The iwl3945_rates[] array has IWL_RATE_COUNT_3945 elements so the
limit here is off by one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:44 -05:00
Stanislaw Gruszka
2b20920d63 iwlegacy: remove iwl-sta.c
I forgot to remove this file before.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Eliad Peller
f6e8cb72ad mac80211: always clear SDATA_STATE_OFFCHANNEL flag
If the vif is stopped while it is offchannel (e.g. right
after p2p negotiation) the SDATA_STATE_OFFCHANNEL flag
is never get cleared, resulting in various bad effects
(e.g. GO can't start beaconing).

Fix it by clearing the SDATA_STATE_OFFCHANNEL flag
even if the vif is stopped.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Dave Täht
b156579b14 wireless: Treat IPv6 diffserv the same as IPv4 for 802.11e
Wireless will select a different hardware queue based on the
top 3 bits of the diffserv field, for ipv4. Extend that queue
selection mechanism to ipv6, and make the calls orthogonal.

Signed-off-by: Dave Täht <dave.taht@bufferbloat.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Ilan Elias
288e0713f4 NFC: Export a new attribute nfcid1 in target info
The nfcid1 is the NFC-A identifier.
It is exported as an attribute of the target info
(returned as a response to NFC_CMD_GET_TARGET).

Signed-off-by: Ilan Elias <ilane@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Helmut Schaa
9931df2692 rt2x00: Mark active channel's survey data as "in use"
This is just a cosmetical fix since we only return survey data for the
active channel but it allows iw to show that the survey data is
for the currently used channel.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Larry Finger
5d07a3d62f b43legacy: Avoid packet losses in the dma worker code
This patch addresses a bug in the dma worker code that keeps draining
packets even when the hardware queues are full. In such cases packets
can not be passed down to the device and are erroneusly dropped by the
code. It is based on commit bad6919469,
which fixes the same problem in b43.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Rafał Miłecki
9bd2857188 b43: N-PHY: fix typo in TX power fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:42 -05:00
Rafał Miłecki
b97c071840 b43: N-PHY: fix controling RF override
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:42 -05:00
Rafał Miłecki
ed5103edc2 b43: N-PHY: update gain ctl workarounds
Specs were updated, now we match wl according to MMIO dumps.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:42 -05:00
Rafał Miłecki
cc96adddbb b43: add lacking boardflags defines
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:42 -05:00
Luis R. Rodriguez
6ec414fd12 ath9k: make ath_mci_duty_cycle static
This fixes this sparse warning:

  CHECK   drivers/net/wireless/ath/ath9k/mci.c
drivers/net/wireless/ath/ath9k/mci.c:23:4: warning: symbol 'ath_mci_duty_cycle' was not declared. Should it be static?

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:42 -05:00
Djalal Harouni
84c816dad5 drivers/iwlwifi: use dma_zalloc_coherent() for DMA allocation
Replace dma_alloc_coherent()+memset() with the new dma_zalloc_coherent()

Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:41 -05:00
Rafał Miłecki
3dda07b6f9 b43: N-PHY: get idle TSSI values
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:41 -05:00
Rafał Miłecki
2c8ac7eb96 b43: N-PHY: fix success condition of running samples
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:41 -05:00
Rafał Miłecki
9dd4d9b992 b43: N-PHY: move common TX/RX functions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:41 -05:00
Luis R. Rodriguez
3b77d5ec0c cfg80211: relicense reg.c reg.h and genregdb.awk to ISC
Following the tradition we have had with ath5k, ath9k, CRDA,
wireless-regdb I'd like to license this code under the permissive ISC
license for the code sharing purposes with other OSes, it'd sure be nice
to help the landscape in this area. Although I am %82.89 owner of the
regulatory code I have asked every contributor to the regulatory code
and have receieved positive Acked-bys from everyone except two deceased
entities:

 o Frans Pop RIP 2010 [0]
	- Frans Pop <elendil@planet.nl>
	- Frans Pop <fjp@debian.org>
 o Nokia     RIP February, 11, 2011 [1], [2]
	- ext-yuri.ershov@nokia.com
	- kalle.valo@nokia.com

Frans Pop's contribution was a simple patch 55f98938, titled,
"wireless: remove trailing space in messages" which just add a \n
to some printk lines. I'm going to treat these additions as
uncopyrightable.

As for the contributions made by employees on behalf of Nokia
my contact point was Petri Karhula <petri.karhula@nokia.com> but
after one month he noted he had not been able to get traction from the
legal department on this request, as such it I proceeded by replacing
their contributions in previous patches.

The end goal is to help a clean rewrite that starts in userspace
that is shared under ISC license which currently is taking place with
the regulatory simulator [3].

[0] http://lists.debian.org/debian-devel/2011/12/msg00263.html
[1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/
[2] http://NokiaPlanB.com
[3] git://github.com/mcgrof/regsim.git

Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mihai Moldovan <ionic@ionic.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sven Neumann <s.neumann@raumfeld.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Tony Vroon <tony@linx.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Pat Erley <pat-lkml@erley.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Joe Perches <joe@perches.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: John Gordon <john@devicescape.com>
Acked-by: Simon Barber <protocolmagic@gmail.com>
Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Acked-by: Jiri Benc <jbenc@upir.cz>
Acked-by: Bruno Randolf <br1@einfach.org>
Acked-by: Scott James Remnant <keybuk@google.com>
Acked-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:41 -05:00
Luis R. Rodriguez
6653325a55 cfg80211: replace reg.c Nokia commit 269ac5
Nokia hasn't gotten back to me in over 1 month for a relicense
change request. There are only a few changes that they contributed,
so just reverting their changes but replacing with another set.
This change replaces this commit:

commit 269ac5fd2d
Author: Kalle Valo <kalle.valo@nokia.com>
Date:   Tue Dec 1 10:47:15 2009 +0200

    cfg80211: indent regulatory messages with spaces

    The regulatory messages in syslog look weird:

    kernel: cfg80211: Regulatory domain: US
    kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

    Indent them with four spaces instead of the tab character to get prettier
    output.

    Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
    Acked: Luis R. Rodriguez <lrodriguez@atheros.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

Cc: Petri Karhula <petri.karhula@nokia.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00
Luis R. Rodriguez
8848bef038 cfg80211: replace reg.c Nokia commit c4c32294
Nokia hasn't gotten back to me in over 1 month for a relicense
change request. There are only a few changes that they contributed,
so just reverting their changes but replacing with another set.
This change replaces this commit:

commit c4c322941c
Author: Yuri Ershov <ext-yuri.ershov@nokia.com>
Date:   Tue Jun 29 15:08:08 2010 +0400

    cfg80211: Update of regulatory request initiator handling

    In some cases there could be possible dereferencing freed pointer. The
    update is intended to avoid this issue.

    Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

Cc: Petri Karhula <petri.karhula@nokia.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00
Luis R. Rodriguez
a98aa7ae14 ath9k_hw: fix sparse complaint on ar9003_switch_com_spdt_get()
This fixes this sparse complaint:

make C=2 CF="-D__CHECK_ENDIAN__" M=drivers/net/wireless/ath/

  CHECK   drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21:    expected restricted __le32 [usertype] val
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21:    got restricted __le16 [usertype] switchcomspdt
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21:    expected restricted __le32 [usertype] val
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21:    got restricted __le16 [usertype] switchcomspdt

The eep->modalHeader5G.switchcomspdt is a le16 and we return u16,
so just return le16_to_cpu().

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00
Luis R. Rodriguez
76ff9a611d ath5k: avoid sparse warnings on tracing
Just skip the sparse checks on tracing.

  CHECK   drivers/net/wireless/ath/ath5k/base.c
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: error: incompatible types for operation (<)
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1:    left side has type struct ath5k_hw *<noident>
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1:    right side has type int
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: error: incompatible types for operation (<)
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1:    left side has type struct ath5k_hw *<noident>
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1:    right side has type int
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: error: incompatible types for operation (<)
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1:    left side has type struct ath5k_hw *<noident>
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1:    right side has type int
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
  CC [M]  drivers/net/wireless/ath/ath5k/base.o

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00
Luis R. Rodriguez
1512a48656 ath9k: fix tx queue sparse complaint
This fixes this rant from sparse:

  CHECK   drivers/net/wireless/ath/ath9k/xmit.c
drivers/net/wireless/ath/ath9k/xmit.c:107:13: warning: context imbalance in 'ath_txq_lock' - wrong count at exit
drivers/net/wireless/ath/ath9k/xmit.c:112:13: warning: context imbalance in 'ath_txq_unlock' - unexpected unlock
drivers/net/wireless/ath/ath9k/xmit.c:123:30: warning: context imbalance in 'ath_txq_unlock_complete' - unexpected unlock
  CC [M]  drivers/net/wireless/ath/ath9k/xmit.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00
Luis R. Rodriguez
e01ff34edc ath9k_hw: fix sparse warnings on ar9003_rtt.c
This fixes these sparse warnings:

  CHECK   drivers/net/wireless/ath/ath9k/ar9003_rtt.c
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:36:6: warning: symbol 'ar9003_hw_rtt_enable' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:41:6: warning: symbol 'ar9003_hw_rtt_disable' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:46:6: warning: symbol 'ar9003_hw_rtt_set_mask' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:52:6: warning: symbol 'ar9003_hw_rtt_force_restore' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:102:6: warning: symbol 'ar9003_hw_rtt_load_hist' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:135:6: warning: symbol 'ar9003_hw_rtt_fill_hist' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:143:6: warning: symbol 'ar9003_hw_rtt_clear_hist' was not declared. Should it be stati

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00
Ilan Elias
004161cb52 NFC: Handle error during NCI data exchange
Add support for NCI Interface Error Notification.
When this notification is received and we're during a
data exchange transaction, indicate an error to the NFC
core layer via the data exchange callback.

Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:39 -05:00
Ilan Elias
637d85a7cd NFC: Update names and structs to NCI spec 1.0 d22
Addition, deletion, and modification of NCI constants.
Changes in NCI commands, responses, and notifications structures.

Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:39 -05:00
Dmitry Shmidt
cee0bec58a wireless: Protect regdomain change by mutex
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:39 -05:00
Helmut Schaa
b423db5b35 mac80211: Remove superfluous ieee80211_rx_h_remove_qos_control
This seems to not serve any purpose anymore, at least all frame
processing afterwards seems to be able to deal with QoS frames. So,
let's save the expensive memmove and just leave the QoS header in the
802.11 frame for further processing.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:28:07 -05:00
John W. Linville
dc0d633e35 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next 2012-01-02 16:43:54 -05:00
Gustavo F. Padovan
4ae1652ef1 Bluetooth: Fix a compile warning in RFCOMM
sock and sk were leftover from another change.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-27 14:43:41 -02:00
Hemant Gupta
3573b80c42 Bluetooth: Incorrect address while storing LTK.
This patch fixes incorrect address storage while storing
Long Term Key for LE Devices using SMP (Security Manager Protocol).
The address stored should be of remote device and not of source device.

Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-23 16:55:06 -02:00
Gustavo F. Padovan
af3e6359a2 Bluetooth: Don't disable interrupt when locking the queue
We run everything in process context now.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 18:07:01 -02:00
Gustavo F. Padovan
f20d09d5f7 Bluetooth: remove *_bh usage from hci_dev_list and hci_cb_list
They don't need to disable interrupts anymore, we only run in process
context now.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 18:06:24 -02:00
Gustavo F. Padovan
460da45d92 Bluetooth: Remove lock from inquiry_cache
It was never used, so removing it.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 18:02:06 -02:00
Gustavo F. Padovan
2fb9b3d4e5 Bluetooth: add debug output to l2cap_ack_timeout()
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 18:00:54 -02:00
Gustavo F. Padovan
5436538fb5 Bluetooth: Remove l2cap priority from inside RFCOMM.
RFCOMM needs a proper priority mechanism inside itself and not try to use
l2cap priority to fix its own problem.

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:45:10 -02:00
Jesse Sung
c0190925da Bluetooth: Add support for BCM20702A0 [0a5c:21e3]
Add another vendor specific ID for BCM20702A0.

output of usb-devices:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e3 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=9439E5CBF66C
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:20:03 -02:00
Brian Gix
5fe57d9e9e Bluetooth: Add SMP to User Passkey and Confirm
Low Energy pairing is performed through the SMP (Security Manager Protocol)
mechanism rather than HCI.

Signed-off-by: Brian Gix <bgix@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:19:03 -02:00
Brian Gix
2b64d153a0 Bluetooth: Add MITM mechanism to LE-SMP
To achive Man-In-The-Middle (MITM) level security with Low Energy,
we have to enable User Passkey Comparison.  This commit modifies the
hard-coded JUST-WORKS pairing mechanism to support query via the MGMT
interface of Passkey comparison and User Confirmation.

Signed-off-by: Brian Gix <bgix@codeaurora.org>
Acked-by: Marcel Holtmann<marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:18:59 -02:00
Ulisses Furquim
371fd83563 Bluetooth: Fix deadlocks with sock lock and L2CAP timers locks
When cancelling a delayed work (timer) in L2CAP we can not sleep holding
the sock mutex otherwise we might deadlock with an L2CAP timer handler.
This is possible because RX/TX and L2CAP timers run in different workqueues.
The scenario below illustrates the problem. Thus we are now avoiding to
sleep on the timers locks.

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.1.0-05270-ga978dc7-dirty #239
 -------------------------------------------------------
 kworker/1:1/873 is trying to acquire lock:
  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth]

 but task is already holding lock:
  ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 ((&(&chan->chan_timer)->work)){+.+...}:
        [<ffffffff8106b276>] check_prevs_add+0xf6/0x170
        [<ffffffff8106b903>] validate_chain+0x613/0x790
        [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0
        [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0
        [<ffffffff81052a6f>] wait_on_work+0x4f/0x160
        [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80
        [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10
        [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth]
        [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth]
        [<ffffffff8130811b>] kernel_connect+0xb/0x10
        [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm]
        [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm]
        [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm]
        [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm]
        [<ffffffff8130bd7e>] sys_connect+0xae/0xc0
        [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220
        [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30

 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}:
        [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0
        [<ffffffff8106b276>] check_prevs_add+0xf6/0x170
        [<ffffffff8106b903>] validate_chain+0x613/0x790
        [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0
        [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0
        [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0
        [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
        [<ffffffff81051ae4>] process_one_work+0x184/0x450
        [<ffffffff8105276e>] worker_thread+0x15e/0x340
        [<ffffffff81057bb6>] kthread+0x96/0xa0
        [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock((&(&chan->chan_timer)->work));
                                lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
                                lock((&(&chan->chan_timer)->work));
   lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);

  *** DEADLOCK ***

 2 locks held by kworker/1:1/873:
  #0:  (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450
  #1:  ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450

 stack backtrace:
 Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239
 Call Trace:
  [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3
  [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0
  [<ffffffff8106b276>] check_prevs_add+0xf6/0x170
  [<ffffffff8106b903>] validate_chain+0x613/0x790
  [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0
  [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0
  [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110
  [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0
  [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0
  [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
  [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0
  [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
  [<ffffffff81051a86>] ? process_one_work+0x126/0x450
  [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
  [<ffffffff81051ae4>] process_one_work+0x184/0x450
  [<ffffffff81051a86>] ? process_one_work+0x126/0x450
  [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth]
  [<ffffffff8105276e>] worker_thread+0x15e/0x340
  [<ffffffff81052610>] ? manage_workers+0x110/0x110
  [<ffffffff81057bb6>] kthread+0x96/0xa0
  [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10
  [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe
  [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70
  [<ffffffff813b1ef0>] ? gs_change+0xb/0xb

Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:15:09 -02:00
Ulisses Furquim
686ebf283b Bluetooth: Make HCI call directly into SCO and L2CAP event functions
The struct hci_proto and all related register/unregister and dispatching
code was removed. HCI core code now call directly the SCO and L2CAP
event functions.

Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:07:29 -02:00
Andrei Emeltchenko
68a8aea459 Bluetooth: Remove magic numbers from le scan cmd
Make code readable by removing magic numbers.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:03:24 -02:00
Gustavo F. Padovan
8a154a8feb Bluetooth: fix bt_accept_dequeue() to work in process context
No local_bh_disable is needed there once we run everything in process
context. The same goes for the replacement of bh_lock_sock() by
lock_sock().

Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-22 14:02:08 -02:00