When we update the gen6 ppgtt page directories, we do so by writing the
new address into a reserved slot in the GGTT. It appears that when the
GPU reads that entry from the gsm, it uses its small cache and that we
need to invalidate that cache after writing. We don't see an issue
currently as we prefill the ppgtt page directories on creation; and only
create the single aliasing_ppgtt long before we start using the GGTT
(and so before the cache may have a conflicting entry).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611171825.13678-1-chris@chris-wilson.co.uk
On allocation error, do not jump to the unwind handler that tries to
free the error pointer.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611153332.14824-1-chris@chris-wilson.co.uk
The HW only accepts offsets within ring->size, and fails peculiarly if
the RING_HEAD or RING_TAIL is set to ring->size. Therefore whenever we
set ring->head/ring->tail we want to make sure it is within value (using
intel_ring_wrap()).
v2: Double check execlists as well
v3: Remove redundancy with assert_ring_tail_valid()
v4: Just assert in intel_ring_reset() rather than be over-defensive.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180611110845.31890-2-chris@chris-wilson.co.uk
The discovery with trying to enable full-ppgtt was that we were
completely failing to the load both the mm and context following the
reset. Although we were performing mmio to set the PP_DIR (per-process
GTT) and CCID (context), these were taking no effect (the assumption was
that this would trigger reload of the context and restore the page
tables). It was not until we performed the LRI + MI_SET_CONTEXT in a
following context switch would anything occur.
Since we are then required to reset the context image and PP_DIR using
CS commands, we place those commands into every batch. The hardware
should recognise the no-ops and eliminate the expensive context loads,
but we still have to pay the cost of using cross-powerwell register
writes. In practice, this has no effect on actual context switch times,
and only adds a few hundred nanoseconds to no-op switches. We can improve
the latter by eliminating the w/a around known no-op switches, but there
is an ulterior motive to keeping them.
Always emitting the context switch at the beginning of the request (and
relying on HW to skip unneeded switches) does have one key advantage.
Should we implement request reordering on Haswell, we will not know in
advance what the previous executing context was on the GPU and so we
would not be able to elide the MI_SET_CONTEXT commands ourselves and
always have to emit them. Having our hand forced now actually prepares
us for later.
Now since that context and mm follow the request, we no longer (and not
for a long time since requests took over!) require a trace point to tell
when we write the switch into the ring, since it is always. (This is
even more important when you remember that simply writing into the ring
bears no relation to the current mm.)
v2: Sandybridge has to agree to use LRI as well.
Testcase: igt/drv_selftests/live_hangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611110845.31890-1-chris@chris-wilson.co.uk
An issue encountered with switching mm on gen7 is that the GPU likes to
hang (with the VS unit busy) when told to force restore the current
context. We can simply workaround this by substituting the
MI_FORCE_RESTORE flag with a round-trip through the kernel_context,
forcing the context to be saved and restored; thereby reloading the
PP_DIR registers and updating the modified page directory!
v2: Undo attempted optimisation in caller (Tvrtko)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611104808.24295-1-chris@chris-wilson.co.uk
While checking workarounds related to the CDCLK PLL, I noticed that the
DMC firmware bits for WA#1183 are missing for SKL. After that I
clarified with HW people that it's not needed on SKL, since it doesn't
support eDP1.4 which would be the only thing requiring the problematic
CDCLK clock rates. So in theory we shouldn't ever choose these
frequencies, but add an assert in any case for catching such cases and
for documentation.
v2:
- Move the check to skl_set_cdclk and warn whenever using the
corresponding VCO freq. (Ville)
v3:
- Actually check for the platform. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608144137.7943-1-imre.deak@intel.com
Use the correct engine class shift value while storing the ctx hw id.
Fixes the copy+paste error from commit 61d5676b55 ("drm/i915/perf: fix
ctx_id read with GuC & ICL").
Apologies for not spotting this in the original review, the
specific_ctx_id_mask is correct, only the specific_ctx_id had this
problem.
v2: Just use the upper 32 bits of lrc_desc (Chris)
v3: If we use the lrc_desc, we must apply the ctx_id_mask too (Lionel)
Fixes: 61d5676b55 ("drm/i915/perf: fix ctx_id read with GuC & ICL")
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180604233250.609-2-michel.thierry@intel.com
The upper 32 bits of the lrc_desc (bits 52-32 to be precise) are the
context hw id in GEN8-10, so use them and have one less thing to
maintain in the unlikely case we change the descriptor sw fields.
v2: If we use the lrc_desc, we must apply the ctx_id_mask too (Lionel)
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180604233250.609-1-michel.thierry@intel.com
We special case the position of the batch within the GTT to prevent
negative self-relocation deltas from underflowing. However, that
restriction is being applied after a trial pin of the batch in its
current position. Thus we are not rejecting an invalid location if the
batch has been used before, leading to an assertion if we happen to need
to rearrange the entire payload. In the worst case, this may cause a GPU
hang on gen7 or perhaps missing state.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105720
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180610194325.13467-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Due to a silent conflict (silent because we are trying to fix the CI
test that is meant to exercising these failures!) between commit
51e645b665 ("drm/i915: Mark the GPU as wedged without error on fault
injection") and commit 8571a05a9d ("drm/i915: Use GEM suspend when
aborting initialisation"), we failed to actually squash the error
message after injecting the load failure.
Rearrange the code to export i915_load_failure() for better logging of
real errors (and quiet logging of injected errors).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180609111058.2660-1-chris@chris-wilson.co.uk
Setting PCH type to PCH_NOP before checking whether we actually have a
PCH ends up returning true for HAS_PCH_SPLIT() on all non-PCH split
platforms. Fix this by using PCH_NOP only for platforms that actually
have a PCH.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-6-jani.nikula@intel.com
HAS_PCH_NOP() implies a PCH platform without south display, not generic
disabled display. Prefer num_pipes == 0 for PCH independent checks.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-5-jani.nikula@intel.com
Use intel_pch_type() also for mapping the no PCH case (PCH id 0) to
PCH_NONE to simplify code.
Also make sure that intel_pch_type() knows all the PCH ids returned by
intel_virt_detect_pch(). Loudly fail if this isn't the case; this
shouldn't happen anyway.
Cc: Colin Xu <Colin.Xu@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Colin Xu <Colin.Xu@intel.com>
Reviewed-by: Colin Xu <Colin.Xu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-4-jani.nikula@intel.com
Virtualized non-PCH systems such as Broxton or Geminilake should use
PCH_NONE to indicate no PCH rather than PCH_NOP. The latter is a
specific case to indicate a PCH system without south display.
Reported-by: Colin Xu <Colin.Xu@intel.com>
Cc: Colin Xu <Colin.Xu@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Colin Xu <Colin.Xu@intel.com>
Reviewed-by: Colin Xu <Colin.Xu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-2-jani.nikula@intel.com
To allow ourselves to use a first class vma for the aliasing_ppgtt page
directory, we have to reorder the shutdown on module unload to remove
and unpin the aliasing_ppgtt before complaining about any objects left
in the GGTT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180609090151.22007-1-chris@chris-wilson.co.uk
Since vgpu is not supported on Haswell or any other gen6/7, we do not
need to check and act upon it's enablement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608150435.15010-2-chris@chris-wilson.co.uk
hsw_mm_switch() and gen7_mm_switch() are identical, so let's remove the
redundant specialism.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608150435.15010-1-chris@chris-wilson.co.uk
When we want to unwind an error when allocating the PD for gen6, we call
gen6_ppgtt_clear_range() telling to clear upto the PD we've previously
allocated. However, we passed it an incorrect length, passing it the
endpoint instead. Fortunately, as the start was always 0, this has no
impact today, but tomorrow we want to start using non-zero origins.
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608173221.10455-1-chris@chris-wilson.co.uk
On SKL+ the dst colorkey must be configured on the lower
plane that contains the colorkey. This is in contrast to
most earlier platforms where the dst colorkey is configured
on the plane above.
The hardware will peform dst keying only between two immediately
adjacent (in zorder) planes. Plane 2 will be keyed against plane 1,
plane 3 againts plane 2, and so on. There is no way to key arbitrary
planes against plane 1. Thus offering dst color keying on plane 3+
is pointless. In fact it can be harmful since enabling dst keying on
more than one plane on the same pipe leads to only the top-most of
the planes performing the keying. For any plane lower in zorder the
dst key enable is simply ignored.
v2: s/plane 0/plane 1/ etc. since the hw plane names start from 1
Don't break dst colorkey on pre-SKL sprites (hunk ended in the
wrong patch)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180529182804.8571-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
If we have been instructed (by CI) to inject a fault to load the module
with a wedged GPU, do so quietly less we upset CI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607134558.31150-1-chris@chris-wilson.co.uk
There is a problem with kbl up to rev E0 where a heavy
memory/fabric traffic from adjacent engine(s) can cause an engine
reset to fail. This traffic can be from normal memory accesses
or it can be from heavy polling on a semaphore wait.
For engine hogging causing a fail, we already fallback to
full reset. Which effectively stops all engines and thus
we only add a workaround documentation.
For the semaphore wait loop poll case, we add one microsecond
poll interval to semaphore wait to guarantee bandwidth for
the reset preration. The side effect is that we make semaphore
completion latencies also 1us longer.
v2: Let full reset handle the adjacent engine idling (Chris)
v3: Skip render engine (Joonas), please checkpatch on define (Mika)
References: https://bugs.freedesktop.org/show_bug.cgi?id=106684
References: VTHSD#2227190, HSDES#1604216706, BSID#0917
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607172444.17080-1-mika.kuoppala@linux.intel.com
Our reset handling has a retry layer further up in the
chain. As we have told the engine to prepare for reset,
and failed it, make sure to remove that preparation so
that the next attempted reset has a clean slate by triggering
another full prepare cycle for the engines.
v2: ret as int, simplified cleanup (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605160357.32591-1-mika.kuoppala@linux.intel.com
In the next patch, we will subclass the gen6 hw_ppgtt. In order, for the
two different generations of hw ppgtt stucts to be of different size,
push the allocation down to the constructor.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607163040.9781-1-chris@chris-wilson.co.uk
To allow for future non-object backed vma, we need to be able to
specialise the callbacks for binding, et al, the vma. For example,
instead of calling vma->vm->bind_vma(), we now call
vma->ops->bind_vma(). This gives us the opportunity to later override the
operation for a custom vma.
v2: flip order of unbind/bind
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607154047.9171-2-chris@chris-wilson.co.uk
In order to allow ourselves to use VMA to wrap other entities other than
GEM objects, we need to allow for the vma->obj backpointer to be NULL.
In most cases, we know we are operating on a GEM object and its vma, but
we need the core code (such as i915_vma_pin/insert/bind/unbind) to work
regardless of the innards.
The remaining eyesore here is vma->obj->cache_level and related (but
less of an issue) vma->obj->gt_ro. With a bit of care we should mirror
those on the vma itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607154047.9171-1-chris@chris-wilson.co.uk
In preparation for vm_fault_t becoming a distinct type, convert the
fault handler (i915_gem_fault()) over to the new interface.
Based on a patch by Souptick Joarder
References: 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606214520.20220-1-chris@chris-wilson.co.uk
As part of our GEM initialisation now, we send a request to the hardware
in order to record the initial GPU state. This coupled with deferred
idle workers, makes aborting on error tricky. We already have the
mechanism in place to wait on the GPU and cancel all the deferred
workers for suspend, so let's reuse it during the error teardown. It is
already used in places for later init error handling, but doing so at
this point is slightly ugly due to the mutex dance (it's ok, the module
load is still single threaded).
Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606145441.4460-1-chris@chris-wilson.co.uk
The macro declared the ppgtt parameter but implicitly used the local vm
instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606205128.25952-1-chris@chris-wilson.co.uk
When we reach the magic value and do inject a fault into our module load,
mark the module option as being hit. Since we fail from inside pci
probe, the module load isn't actually aborted and the module (and
parameters) are left lingering. igt can then inspect the parameter on its
synchronous completion of modprobe to see if the fault injection was
successful, and will keeping on injecting new faults until the module
succeeds in loading having surpassed the number of fault points.
v2: Reset to 0 after being hit;
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606144153.4244-1-chris@chris-wilson.co.uk
In the near future, I want to subclass gen6_hw_ppgtt as it contains a
few specialised members and I wish to add more. To avoid the ugliness of
using ppgtt->base.base, rename the i915_hw_ppgtt base member
(i915_address_space) as vm, which is our common shorthand for an
i915_address_space local.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605153758.18422-1-chris@chris-wilson.co.uk
The inactive counter was over the active list, and vice versa.
Fortuitously this should not cause a problem in practice as they shared
the same array and clamped the number of entries they would write.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605160623.30163-1-chris@chris-wilson.co.uk
In case of failure during GuC clients creation, we forget to
cleanup earlier pool allocation. Use proper teardown to fix that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605120547.16468-1-michal.wajdeczko@intel.com
As Chris has discovered on his Ivybridge, and later automated test runs
have confirmed, on most of our platforms hrtimer faced with heavy GPU load
can occasionally become sufficiently imprecise to affect PMU sampling
calculations.
This means we cannot assume sampling frequency is what we asked for, but
we need to measure the interval ourselves.
This patch is similar to Chris' original proposal for per-engine counters,
but instead of introducing a new set to work around the problem with
frequency sampling, it swaps around the way internal frequency accounting
is done. Instead of accumulating current frequency and dividing by
sampling frequency on readout, it accumulates frequency scaled by each
period.
v2:
* Typo in commit message, comment on period calculation and USEC_PER_SEC.
(Chris Wilson)
Testcase: igt/perf_pmu/*busy* # snb, ivb, hsw
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605140253.3541-1-tvrtko.ursulin@linux.intel.com
Underlaying field is u64 so the tracepoint needs to be as well.
v2:
* Re-order binary packet for 64-bit alignment. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605134124.25672-1-tvrtko.ursulin@linux.intel.com
In the string tracepoint representation we ended up with the engine
sandwiched between context hardware id and context fence id.
Move the two pieces of context data together for redability.
Binary records are left as is, that is both fields remaing under the
existing name and ordering.
v2:
* Do not consolidate the printk format, just reorder. (Lionel)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-2-tvrtko.ursulin@linux.intel.com
Instead of using the engine->id, use uabi_class:instance pairs in trace-
points including engine info.
This will be more readable, more future proof and more stable for
userspace consumption.
v2:
* Use u16 for class and instance. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: svetlana.kukanova@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-1-tvrtko.ursulin@linux.intel.com
In function gem_init_hw() we are calling uc_init_hw() but in case
of error later in function, we missed to call matching uc_fini_hw()
v2: pulled out from the series
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605122443.23776-1-michal.wajdeczko@intel.com
To spare ourselves a long line later, refactor the repeated check of
bind_count vs pin_count to a helper.
v2: Fix up the commentary!
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605094107.31367-1-chris@chris-wilson.co.uk
In preparation, for having non-vma objects stored inside the ggtt, to
handle restoration of the GGTT following resume, we need to walk over
the ggtt address space rebinding vma, as opposed to walking over bound
objects looking for ggtt entries.
v2: Skip objects only bound for the aliasing_ppgtt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20180605082856.19221-1-chris@chris-wilson.co.uk
Currently, we have a special routine for pinning the context state at
the start of activity tracking, but lack the complementary unpin
routine. Create it to to ease later patches that want to do partial
teardown on error, and, not least, to improve the readability of the
code.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605085348.3018-1-chris@chris-wilson.co.uk
This adds a new vGPU cap info bit VGT_CAPS_HUGE_GTT, which is to detect
whether the host supports shadowing of huge gtt pages. If host does
support it, remove the page sizes restriction for vGPU.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525770425-5373-1-git-send-email-changbin.du@intel.com
Do not update number of enabled dbuf slices in dev_priv struct until we
actually enable/disable dbuf slice in hw. This is leading to never
updating dbuf slices and resulting in DBuf slice mismatch warning.
Fixes: aa9664ffe8 ("drm/i915/icl: Enable 2nd DBuf slice only when needed")
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517132626.5885-1-mahesh1.kumar@intel.com
One thing we didn't really understand about the OA report is that the
ContextID field (dword 2) is copy of the context descriptor (dword 1).
On Gen8->10 and without using GuC we didn't notice the issue because
we only checked the 21bits of the ContextID field in the OA reports
which matches exactly the hw_id stored into the context descriptor.
When using GuC submission we have an issue of a non matching hw_id
because GuC uses bit 20 of the hw_id to signal proxy submission. This
change introduces a mask to compare only the relevant bits.
On ICL the context descriptor format has changed and we failed to
address this. On top of using a mask we also need to shift the bits
properly.
v2: Reuse lrc_desc rather than recomputing part of it (Chris/Michel)
v3: Always pin the context we're filtering with (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 1de401c08f ("drm/i915/perf: enable perf support on ICL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104252
BSpec: 1237
Testcase: igt/perf/gen8-unprivileged-single-ctx-counters
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-3-lionel.g.landwerlin@intel.com
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
We currently using GuC as a proxy to the hardware. When Guc is used in
such mode, it consumes the bit 20 of the hw_id to indicate that the
workload was submitted by proxy.
So far we probably haven't seen the issue because we need to allocate
1048576+ contexts to hit this issue. Still, we should avoid allocating
the hw_id on that bit and restriction to bits [0:19] (i.e 20bits
instead of 21).
v2: Leave the max hw_id computation in i915_gem_context.c (Michel)
v3: Be consistent on if/else usage (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
BSpec: 1237
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-2-lionel.g.landwerlin@intel.com
As the ppgtt for execlists is tightly coupled to the executing context,
and not switch separately, we no longer use the ppgtt->switch_mm hooks
on gen8+. Remove them.
References: 79e6770cb1 ("drm/i915: Remove obsolete ringbuffer emission for gen8+")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180604131552.29370-1-chris@chris-wilson.co.uk
We should keep i915_gem_init/fini functions together for easier
tracking of their symmetry.
v2: rebased, pulled out from the series
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180604090032.20840-1-michal.wajdeczko@intel.com
