Rearrange pedit init code to only access pedit action data while holding
tcf spinlock. Change keys allocation type to atomic to allow it to execute
while holding tcf spinlock. Take tcf spinlock in dump function when
accessing pedit action data.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect ipt action private data from concurrent
modification during dump. Ipt init already takes tcf spinlock when
modifying ipt state.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock and rcu to protect params pointer from concurrent
modification during dump and init. Use rcu swap operation to reassign
params pointer under protection of tcf lock. (old params value is not used
by init, so there is no need of standalone rcu dereference step)
Ife action has meta-actions that are compiled as standalone modules. Rtnl
mutex must be released while loading a kernel module. In order to support
execution without rtnl mutex, propagate 'rtnl_held' argument to meta action
loading functions. When requesting meta action module, conditionally
release rtnl lock depending on 'rtnl_held' argument.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect gact action private state from concurrent
modification during dump and init. Remove rtnl assertion that is no longer
necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf lock to protect csum action struct private data from concurrent
modification in init and dump. Use rcu swap operation to reassign params
pointer under protection of tcf lock. (old params value is not used by
init, so there is no need of standalone rcu dereference step)
Remove rtnl assertion that is no longer necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tcf spinlock to protect bpf action private data from concurrent
modification during dump and init. Remove rtnl lock assertion that is no
longer necessary.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khorenko says:
====================
net/sctp: Avoid allocating high order memory with kmalloc()
Each SCTP association can have up to 65535 input and output streams.
For each stream type an array of sctp_stream_in or sctp_stream_out
structures is allocated using kmalloc_array() function. This function
allocates physically contiguous memory regions, so this can lead
to allocation of memory regions of very high order, i.e.:
sizeof(struct sctp_stream_out) == 24,
((65535 * 24) / 4096) == 383 memory pages (4096 byte per page),
which means 9th memory order.
This can lead to a memory allocation failures on the systems
under a memory stress.
We actually do not need these arrays of memory to be physically
contiguous. Possible simple solution would be to use kvmalloc()
instread of kmalloc() as kvmalloc() can allocate physically scattered
pages if contiguous pages are not available. But the problem
is that the allocation can happed in a softirq context with
GFP_ATOMIC flag set, and kvmalloc() cannot be used in this scenario.
So the other possible solution is to use flexible arrays instead of
contiguios arrays of memory so that the memory would be allocated
on a per-page basis.
This patchset replaces kvmalloc() with flex_array usage.
It consists of two parts:
* First patch is preparatory - it mechanically wraps all direct
access to assoc->stream.out[] and assoc->stream.in[] arrays
with SCTP_SO() and SCTP_SI() wrappers so that later a direct
array access could be easily changed to an access to a
flex_array (or any other possible alternative).
* Second patch replaces kmalloc_array() with flex_array usage.
v2 changes:
sctp_stream_in() users are updated to provide stream as an argument,
sctp_stream_{in,out}_ptr() are now just sctp_stream_{in,out}().
v3 changes:
Move type chages struct sctp_stream_out -> flex_array to next patch.
Make sctp_stream_{in,out}() static incline and move them to a header.
Performance results (single stream):
====================================
* Kernel: v4.18-rc6 - stock and with 2 patches from Oleg (earlier in this thread)
* Node: CPU (8 cores): Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
RAM: 32 Gb
* netperf: taken from https://github.com/HewlettPackard/netperf.git,
compiled from sources with sctp support
* netperf server and client are run on the same node
* ip link set lo mtu 1500
The script used to run tests:
# cat run_tests.sh
#!/bin/bash
for test in SCTP_STREAM SCTP_STREAM_MANY SCTP_RR SCTP_RR_MANY; do
echo "TEST: $test";
for i in `seq 1 3`; do
echo "Iteration: $i";
set -x
netperf -t $test -H localhost -p 22222 -S 200000,200000 -s 200000,200000 \
-l 60 -- -m 1452;
set +x
done
done
================================================
Results (a bit reformatted to be more readable):
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
v4.18-rc7 v4.18-rc7 + fixes
TEST: SCTP_STREAM
212992 212992 1452 60.21 1125.52 1247.04
212992 212992 1452 60.20 1376.38 1149.95
212992 212992 1452 60.20 1131.40 1163.85
TEST: SCTP_STREAM_MANY
212992 212992 1452 60.00 1111.00 1310.05
212992 212992 1452 60.00 1188.55 1130.50
212992 212992 1452 60.00 1108.06 1162.50
===========
Local /Remote
Socket Size Request Resp. Elapsed Trans.
Send Recv Size Size Time Rate
bytes Bytes bytes bytes secs. per sec
v4.18-rc7 v4.18-rc7 + fixes
TEST: SCTP_RR
212992 212992 1 1 60.00 45486.98 46089.43
212992 212992 1 1 60.00 45584.18 45994.21
212992 212992 1 1 60.00 45703.86 45720.84
TEST: SCTP_RR_MANY
212992 212992 1 1 60.00 40.75 40.77
212992 212992 1 1 60.00 40.58 40.08
212992 212992 1 1 60.00 39.98 39.97
Performance results for many streams:
=====================================
* Kernel: v4.18-rc8 - stock and with 2 patches v3
* Node: CPU (8 cores): Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
RAM: 32 Gb
* sctp_test: https://github.com/sctp/lksctp-tools
* both server and client are run on the same node
* ip link set lo mtu 1500
* sysctl -w vm.max_map_count=65530000 (need it to make memory fragmented)
The script used to run tests:
=============================
# cat run_sctp_test.sh
#!/bin/bash
set -x
uname -r
ip link set lo mtu 1500
swapoff -a
free
cat /proc/buddyinfo
./src/apps/sctp_test -H 127.0.0.1 -P 22222 -l -d 0 &
sleep 3
time ./src/apps/sctp_test -H 127.0.0.1 -P 22221 -h 127.0.0.1 -p 22222 \
-s -c 1 -M 65535 -T -t 1 -x 100000 -d 0 1>/dev/null
killall -9 lt-sctp_test
===============================
Results (a bit reformatted to be more readable):
1) ms stock kernel v4.18-rc8, no memory fragmentation
test 1 test 2 test 3
real 0m14.715s 0m14.593s 0m15.954s
user 0m0.954s 0m0.955s 0m0.854s
sys 0m13.388s 0m12.537s 0m13.749s
2) kernel with fixes, no memory fragmentation
test 1 test 2 test 3
real 0m14.959s 0m14.693s 0m14.762s
user 0m0.948s 0m0.921s 0m0.929s
sys 0m13.538s 0m13.225s 0m13.217s
3) kernel with fixes, memory fragmented
'free':
total used free shared buff/cache available
Mem: 32906008 30555200 302740 764 2048068 266452
Mem: 32906008 30379948 541436 764 1984624 442376
Mem: 32906008 30717312 262380 764 1926316 109908
/proc/buddyinfo:
Node 0, zone Normal 40773 37 34 29 0 0 0 0 0 0 0
Node 0, zone Normal 100332 68 8 4 2 1 1 0 0 0 0
Node 0, zone Normal 31113 7 2 1 0 0 0 0 0 0 0
test 1 test 2 test 3
real 0m14.159s 0m15.252s 0m15.826s
user 0m0.839s 0m1.004s 0m1.048s
sys 0m11.827s 0m14.240s 0m14.778s
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This path replaces physically contiguous memory arrays
allocated using kmalloc_array() with flexible arrays.
This enables to avoid memory allocation failures on the
systems under a memory stress.
Signed-off-by: Oleg Babin <obabin@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces wrappers for accessing in/out streams indirectly.
This will enable to replace physically contiguous memory arrays
of streams with flexible arrays (or maybe any other appropriate
mechanism) which do memory allocation on a per-page basis.
Signed-off-by: Oleg Babin <obabin@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updated README.
Added config file that contains the minimum required features enabled to
run the tests currently present in the kernel.
This must be updated when new unittests are created and require their own
modules.
Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
l2tp: rework pppol2tp ioctl handling
The current ioctl() handling code can be simplified. It tests for
non-relevant conditions and uselessly holds sockets. Once useless
code is removed, it becomes even simpler to let pppol2tp_ioctl() handle
commands directly, rather than dispatch them to pppol2tp_tunnel_ioctl()
or pppol2tp_session_ioctl(). That is the approach taken by this series.
Patch #1 and #2 define helper functions aimed at simplifying the rest
of the patch set.
Patch #3 drops useless tests in pppol2p_ioctl() and avoid holding a
refcount on the socket.
Patches #4, #5 and #6 are the core of the series. They let
pppol2tp_ioctl() handle all ioctls and drop the tunnel and session
specific functions.
Then patch #6 brings a little bit of consolidation.
Finally, patch #7 takes advantage of the simplified code to make
pppol2tp sockets compatible with dev_ioctl(). Certainly not a killer
feature, but it is trivial and it is always nice to see l2tp getting
better integration with the rest of the stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return -ENOIOCTLCMD for unknown ioctl commands. This lets dev_ioctl()
handle generic socket ioctls like SIOCGIFNAME or SIOCGIFINDEX.
PF_PPPOX/PX_PROTO_OL2TP was one of the few socket types not honouring
this mechanism.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Integrate memset(0) in pppol2tp_copy_stats() to avoid calling it
manually every time.
While there, constify 'stats'.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
pppol2tp_ioctl() has everything in place for handling PPPIOCGL2TPSTATS
on session sockets. We just need to copy the stats and set ->session_id.
As a side effect of sharing session and tunnel code, ->using_ipsec is
properly set even when the request was made using a session socket.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle PPPIOCGL2TPSTATS in pppol2tp_ioctl() if the socket represents a
tunnel. This one is a bit special because the caller may use the tunnel
socket to retrieve statistics of one of its sessions. If the session_id
is set, the corresponding session's statistics are returned, instead of
those of the tunnel. This is handled by the new
pppol2tp_tunnel_copy_stats() helper function.
Set ->tunnel_id and ->using_ipsec out of the conditional, so
that it can be used by the 'else' branch in the following patch.
We cannot do that for ->session_id, because tunnel sockets have to
report the value that was originally passed in 'stats.session_id',
while session sockets have to report their own session_id.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let pppol2tp_ioctl() handle ioctl commands directly. It still relies on
pppol2tp_{session,tunnel}_ioctl() for PPPIOCGL2TPSTATS.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Drop test on 'sk': sock->sk cannot be NULL, or pppox_ioctl() could
not have called us.
* Drop test on 'SOCK_DEAD' state: if this flag was set, the socket
would be in the process of being released and no ioctl could be
running anymore.
* Drop test on 'PPPOX_*' state: we depend on ->sk_user_data to get
the session structure. If it is non-NULL, then the socket is
connected. Testing for PPPOX_* is redundant.
* Retrieve session using ->sk_user_data directly, instead of going
through pppol2tp_sock_to_session(). This avoids grabbing a useless
reference on the socket.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_get() is used for two different purposes. If 'tunnel' is
NULL, the session is searched globally in the supplied network
namespace. Otherwise it is searched exclusively in the tunnel context.
Callers always know the context in which they need to search the
session. But some of them do provide both a namespace and a tunnel,
making the semantic of the call unclear.
This patch defines l2tp_tunnel_get_session() for lookups done in a
tunnel and restricts l2tp_session_get() to namespace searches.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use helper function to figure out if a tunnel is using ipsec.
Also, avoid accessing ->sk_policy directly since it's RCU protected.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas says:
====================
netsec driver improvements
This patchset introduces some improvements on socionext netsec driver.
- patch 1/2, avoids unneeded MMIO reads on the Rx path
- patch 2/2, is adjusting the numbers of descriptors used
Changes since v1:
- Move dma_rmb() to protect descriptor accesses until the device
has updated the NETSEC_RX_PKT_OWN_FIELD bit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Increasing descriptors to 256 from 128 and adjusting the NAPI weight
to 64 increases performace on Rx by ~20% on 64byte packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MMIO reads for remaining packets in queue occur (at least)twice per
invocation of netsec_process_rx(). We can use the packet descriptor to
identify if it's owned by the hardware and break out, avoiding the more
expensive MMIO read operations. This has a ~2% increase on the pps of the
Rx path when tested with 64byte packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/neterion/vxge/vxge-config.c:1097:6: warning:
variable 'ret' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-config.c:2263:6: warning:
variable 'req_out' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-config.c:2262:22: warning:
variable 'status' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-config.c:2360:22: warning:
variable 'status' set but not used [-Wunused-but-set-variable]
enum vxge_hw_status status = VXGE_HW_OK;
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always set the affinity hint, even if #cpu != #vq.
Handle the case where #cpu > #vq (including when #cpu % #vq != 0) and
when #vq > #cpu (including when #vq % #cpu != 0).
Signed-off-by: Caleb Raitto <caraitto@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jon Olson <jonolson@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make vp_set_vq_affinity() take a cpumask instead of taking a single CPU.
If there are fewer queues than cores, queue affinity should be able to
map to multiple cores.
Link: https://patchwork.ozlabs.org/patch/948149/
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Caleb Raitto <caraitto@google.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PTP support includes:
Ingress, and egress timestamping.
One step timestamping available.
PTP clock support.
Periodic output support.
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng says:
====================
tcp: new mechanism to ACK immediately
This patch is a follow-up feature improvement to the recent fixes on
the performance issues in ECN (delayed) ACKs. Many of the fixes use
tcp_enter_quickack_mode routine to force immediate ACKs. However the
routine also reset tracking interactive session. This is not ideal
because these immediate ACKs are required by protocol specifics
unrelated to the interactiveness nature of the application.
This patch set introduces a new flag to send a one-time immediate ACK
without changing the status of interactive session tracking. With this
patch set the immediate ACKs are generated upon these protocol states:
1) When a hole is repaired
2) When CE status changes between subsequent data packets received
3) When a data packet carries CWR flag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 5681 sec 4.2:
To provide feedback to senders recovering from losses, the receiver
SHOULD send an immediate ACK when it receives a data segment that
fills in all or part of a gap in the sequence space.
When a gap is partially filled, __tcp_ack_snd_check already checks
the out-of-order queue and correctly send an immediate ACK. However
when a gap is fully filled, the previous implementation only resets
pingpong mode which does not guarantee an immediate ACK because the
quick ACK counter may be zero. This patch addresses this issue by
marking the one-time immediate ACK flag instead.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent fix of acking immediately in DCTCP on CE status change
has an undesirable side-effect: it also resets TCP ack timer and
disables pingpong mode (interactive session). But the CE status
change has nothing to do with them. This patch addresses that by
using the new one-time immediate ACK flag instead of calling
tcp_enter_quickack_mode().
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new flag to indicate a one-time immediate ACK. This flag is
occasionaly set under specific TCP protocol states in addition to
the more common quickack mechanism for interactive application.
In several cases in the TCP code we want to force an immediate ACK
but do not want to call tcp_enter_quickack_mode() because we do
not want to forget the icsk_ack.pingpong or icsk_ack.ato state.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I placed the "fall through"
annotation at the bottom of the case, which is what GCC is expecting
to find.
Addresses-Coverity-ID: 115075 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I placed the "fall through"
annotation at the bottom of the case, which is what GCC is expecting
to find.
Addresses-Coverity-ID: 1369529 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comment at the
top of the switch statement with a proper "fall through" annotation for
each case, which is what GCC is expecting to find.
Addresses-Coverity-ID: 1056542 ("Missing break in switch")
Addresses-Coverity-ID: 1339579 ("Missing break in switch")
Addresses-Coverity-ID: 1369526 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The static int 'zero' is defined but is never used hence it is
redundant and can be removed. The use of this variable was removed
with commit a158bdd324 ("rxrpc: Fix call timeouts").
Cleans up clang warning:
warning: 'zero' defined but not used [-Wunused-const-variable=]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl8152_system_suspend defines the variable "ret", but it is not modified
after initialization. So just remove it.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes following smatch warnings:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2826 bnxt_fill_coredump_seg_hdr() error: strcpy() '"sEgM"' too large for 'seg_hdr->signature' (5 vs 4)
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2858 bnxt_fill_coredump_record() error: strcpy() '"cOrE"' too large for 'record->signature' (5 vs 4)
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2879 bnxt_fill_coredump_record() error: strcpy() 'utsname()->sysname' too large for 'record->os_name' (65 vs 32)
Fixes: 6c5657d085 ("bnxt_en: Add support for ethtool get dump.")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add LED identification support for liquidio TP copperhead cards.
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 5e7baf0fcb ("qed/qede: Multi CoS support.")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function mlxsw_core_driver_put only traverse mlxsw_core_driver_list
to find the matched mlxsw_driver,but never used it.
So it can be removed safely.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events, the driver uses
a per CPU napi structure for this case. Some SoCs such as armada 3700
have a single interrupt for Ethernet events, the driver uses a global
napi structure for this case.
Current mvneta_config_rss() always operates the per cpu napi structure.
Fix it by operating a global napi for "single interrupt" case, and per
cpu napi structure for remaining cases.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 2636ac3cc2 ("net: mvneta: Add network support for Armada 3700 SoC")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
With SMC-D z/OS sends a test link signal every 10 seconds. Linux is
supposed to answer, otherwise the SMC-D connection breaks.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
r8169: smaller improvements
This series includes smaller improvements, no functional change
intended.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't have to configure the max jumbo frame size per chip
(sub-)version. It can be easily determined based on the chip family.
And new members of the RTL8168 family (if there are any) should be
automatically covered.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't have to configure the csum function per chip (sub-)version.
The distinction is simple, versions RTL8102e and from RTL8168c onwards
support csum_v2.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the interrupt handler a little and make it better readable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The asm headers shouldn't be included directly. asm/irq.h is
implicitly included by linux/interrupt.h, and instead of
asm/io.h include linux/io.h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The version number hasn't changed for ages and in general I doubt it
provides any benefit. The message in rtl_init_one() may even be
misleading because it's printed also if something fails in probe.
Therefore let's remove the version information.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-08-10
Here's one more (most likely last) bluetooth-next pull request for the
4.19 kernel.
- Added support for MediaTek serial Bluetooth devices
- Initial skeleton for controller-side address resolution support
- Fix BT_HCIUART_RTL related Kconfig dependencies
- A few other minor fixes/cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
