During transition to uplink representors the code responsible for
initializing ethtool steering functionality wasn't added to representor
init rx routine. This causes NULL pointer dereference during configuration
of network flow classification rule with ethtool (only possible to
reproduce with next commit in this series which registers necessary ethtool
callbacks).
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reuse infrastructure that already exists for pf in legacy mode to show/set
Rx flow hash indirection table and RSS hash key for uplink representors.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Uplink representor traffic will be redirected to an empty root ft rather
than directly to a direct tir or ttc table, this root ft will be empty and
will be used as a link for auto-chaining with ttc table or ethtool tables
in downstream patches.
On load, fs core will connect uplink rep root_ft with ttc table. In case
ethtool steering will be used, fs core will auto connect root_ft with
the ethtool bypass tables, which will be connected with the ttc table.
vport_rx_rule[uplink_rep]->root_ft->ethtool->ttc.
For non-uplink representors, for simplicity root_ft will always point at
ttc table, hence the replace vport_rx rule logic is removed.
vport_rx_rule[non_uplink_rep]->root_ft(ttc).
For now ethtool steering support can only be available on uplink rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
mlx5_eswitch_inline_mode_get() is used only in eswitch_offloads.c.
Hence, make it static and adjacent to its caller function.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Instead of giving ft tables one of the largest tables available - 4M,
give it a more reasonable size - 64k. Especially since it will
always be created as a miss hook in the following patch.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The esw_vport_tbl_get() function returns error pointers on error.
Fixes: 96e326878f ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
According to PRM, forward to flow table along with either packet
reformat or decap is supported only if reformat_and_fwd_to_table
capability is set for the flow table.
Add dependency on the capability and pack all the conditions for "goto
chain" in a single function.
Fix language in error message in case of not supporting forward to a
lower numbered flow table.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Multi-port RoCE mode requires tagging traffic that passes through the
vport.
This matching can cause performance degradation, therefore disable it
and use the legacy matching on vhca_id and source_port when possible.
Fixes: 92ab1eb392 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use reverse chirstmas tree inside mlx5e_ethtool_get_link_ksettings.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When port speed can't be reported based on ext_eth_proto_capability
or eth_proto_capability instead of reporting speed as unknown check
if the port's speed can be inferred based on the data_rate_oper field.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This series adds some HW bits and definitions for mlx5 driver, to be
used by downstream features in both rdma and netdev branches.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: HW bit for goto chain offload support
net/mlx5: Expose link speed directly
net/mlx5: Introduce TLS and IPSec objects enums
net/mlx5: Introduce egress acl forward-to-vport capability
net/mlx5: Expose raw packet pacing APIs
net/mlx5e: Replace zero-length array with flexible-array member
net/mlx5: fix spelling mistake "reserverd" -> "reserved"
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Commit a8d0f11ee5 ("MIPS: SGI-IP27: Enable ethernet phy on second
Origin 200 module") fixes the root cause of not detected PHYs.
Therefore the workaround can go away now.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: introduce Qualcomm IPA driver (UPDATED)
This series presents the driver for the Qualcomm IP Accelerator (IPA).
This is version 2 of this updated series. It includes the following
small changes since the previous version:
- Now based on net-next instead of v5.6-rc
- Config option now named CONFIG_QCOM_IPA
- Some minor cleanup in the GSI code
- Small change to replenish logic
- No longer depends on remoteproc bug fixes
What follows is the basically same explanation as was posted previously.
-Alex
I have posted earlier versions of this code previously, but it has
undergone quite a bit of development since the last time, so rather
than calling it "version 3" I'm just treating it as a new series
(indicating it's been updated in this message). The fast/data path
is the same as before. But the driver now (nearly) supports a
second platform, its transaction handling has been generalized
and improved, and modem activities are now handled in a more
unified way.
This series is available (based on net-next in branch "ipa_updated-v2"
in this git repository:
https://git.linaro.org/people/alex.elder/linux.git
The branch depends on other one other small patch that I sent out
for review earlier.
https://lore.kernel.org/lkml/20200306042302.17602-1-elder@linaro.org/
I want to address some of the discussion that arose last time.
First, there was the WWAN discussion. Here's the history:
- This was last posted nine months ago.
- Reviewers at that time favored developing a new WWAN subsystem that
would be used for managing devices like this. And the suggestion
was to not accept this driver until that could be developed.
- Along the way, Apple acquired much of Intel's modem business.
And as a result, the generic framework became less pressing.
- I did participate in the WWAN subsystem design however, and
although it went dormant for a while it's been resurrected:
https://lore.kernel.org/netdev/20200225100053.16385-1-johannes@sipsolutions.net/
- Unfortunately the proposed WWAN design was not an easy fit
with Qualcomm's integrated modem interfaces. Given that
rmnet is a supported link type for in the upstream "iproute2"
package (more on this below), I have opted not to integrate
with any WWAN subsystem.
So in summary, this driver does not integrate with a generic WWAN
framework. And I'd like it to be accepted upstream despite that.
Next, Arnd Bergmann had some concerns about flow control. (Note:
some of my discussions with Arnd about this were offline.) The
overall architecture here also involves the "rmnet" driver:
drivers/net/ethernet/qualcomm/rmnet
The rmnet driver presents a network device for use. It connects
with another network device presented, by the IPA driver. The
rmnet driver wraps (and unwraps) packets transferred to (and from)
the IPA driver with QMAP headers.
---------------
| rmnet_data0 | <-- "real" netdev
---------------
|| }- QMAP spoken here
--------------
| rmnet_ipa0 | <-- also netdev, transporting QMAP packets
--------------
||
--------------
( IPA hardware )
--------------
Arnd's concern was that the rmnet_data0 network device does not
have the benefit of information about the state of the underlying
IPA hardware in order to be effective in controlling TX flow.
The feared result is over-buffering of TX packets (bufferbloat).
I began working on some simple experiments to see whether (or how
much) his concern was warranted. But it turned out that completing
these experiments was much more work than had been hoped.
The rmnet driver is present in the upstream kernel. There is also
support for the rmnet link type in the upstream "ip" user space
command in the "iproute2" package. Changing the layering of rmnet
over IPA likely involves deprecating the rmnet driver and its
support in "iproute2". I would really rather not go down that
path.
There is precedent for this sort of layering of network devices
(L2TP, VLAN). And any architecture like this would suffer the
issues Arnd mentioned; the problem is not limited to rmnet and IPA.
I do think this is a problem worth solving, but the prudent thing
to do might be to try to solve it more generally.
So to summarize on this issue, this driver does not attempt to
change the way the rmnet and IPA drivers work together. And even
though I think Arnd's concerns warrant more investigation, I'd like
this driver to to be accepted upstream without any change to this
architecture.
Finally, a more technical description for the series, and some
acknowledgements to some people who contributed to it.
The IPA is a component present in some Qualcomm SoCs that allows
network functions such as aggregation, filtering, routing, and NAT
to be performed without active involvement of the main application
processor (AP).
In this initial patch series these advanced features are not
implemented. The IPA driver simply provides a network interface
that makes the modem's LTE network available in Linux. This initial
series supports only the Qualcomm SDM845 SoC. The Qualcomm SC7180
SoC is partially supported, and support for other platforms will
follow.
This code is derived from a driver developed by Qualcomm. A version
of the original source can be seen here:
https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree
in the "drivers/platform/msm/ipa" directory. Many were involved in
developing this, but the following individuals deserve explicit
acknowledgement for their substantial contributions:
Abhishek Choubey
Ady Abraham
Chaitanya Pratapa
David Arinzon
Ghanim Fodi
Gidon Studinski
Ravi Gummadidala
Shihuan Liu
Skylar Chang
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPA-related nodes and definitions to "sdm845.dtsi".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an entry in the MAINTAINERS file for the Qualcomm IPA driver
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add build and Kconfig support for the Qualcomm IPA driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements two forms of out-of-band communication between
the AP and modem.
- QMI is a mechanism that allows clients running on the AP
interact with services running on the modem (and vice-versa).
The AP IPA driver uses QMI to communicate with the corresponding
IPA driver resident on the modem, to agree on parameters used
with the IPA hardware and to ensure both sides are ready before
entering operational mode.
- SMP2P is a more primitive mechanism available for the modem and
AP to communicate with each other. It provides a means for either
the AP or modem to interrupt the other, and furthermore, to provide
32 bits worth of information. The IPA driver uses SMP2P to tell
the modem what the state of the IPA clock was in the event of a
crash. This allows the modem to safely access the IPA hardware
(or avoid doing so) when a crash occurs, for example, to access
information within the IPA hardware.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch includes code implementing the modem functionality.
There are several communication paths between the AP and modem,
separate from the main data path provided by IPA. SMP2P provides
primitive messaging and interrupt capability, and QMI allows more
complex out-of-band messaging to occur between entities on the AP
and modem. (SMP2P and QMI support are added by the next patch.)
Management of these (plus the network device implementing the data
path) is done by code within "ipa_modem.c".
Sort of unrelated, this patch also includes the code supporting the
microcontroller CPU present on the IPA. The microcontroller can be
used to implement special handling of packets, but at this time we
don't support that. Still, it is a component that needs to be
initialized, and in the event of a crash we need to do some
synchronization between the AP and the microcontroller.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
One TX endpoint (per EE) is used for issuing immediate commands to
the IPA. These commands request activites beyond simple data
transfers to be done by the IPA hardware. For example, the IPA is
able to manage routing packets among endpoints, and immediate commands
are used to configure tables used for that routing.
Immediate commands are built on top of GSI transactions. They are
different from normal transfers (in that they use a special endpoint,
and their "payload" is interpreted differently), so separate functions
are used to issue immediate command transactions.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch contains code implementing filter and routing tables for
the IPA. A filter table allows rules to be used for filtering
packets that depart the AP at an endpoint. A filter table entry
contains the address of a set of rules to apply for each endpoint
that supports filtering.
A routing table allows packets to be routed to an endpoint based
on packet metadata. It is also a table whose entries each contain
the address of a set of routing rules to apply.
Neither filtering nor routing is supported by the current driver.
All table entries refer to rules that mean "no filtering" and "no
routing."
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch includes the code implementing an IPA endpoint. This is
the primary abstraction implemented by the IPA. An endpoint is one
end of a network connection between two entities physically
connected to the IPA. Specifically, the AP and the modem implement
endpoints, and an (AP endpoint, modem endpoint) pair implements the
transfer of network data in one direction between the AP and modem.
Endpoints are built on top of GSI channels, but IPA endpoints
represent the higher-level functionality that the IPA provides.
Data can be sent through a GSI channel, but it is the IPA endpoint
that represents what is on the "other end" to receive that data.
Other functionality, including aggregation, checksum offload and
(at some future date) IP routing and filtering are all associated
with the IPA endpoint.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements GSI transactions. A GSI transaction is a
structure that represents a single request (consisting of one or
more TREs) sent to the GSI hardware. The last TRE in a transaction
includes a flag requesting that the GSI interrupt the AP to notify
that it has completed.
TREs are executed and completed strictly in order. For this reason,
the completion of a single TRE implies that all previous TREs (in
particular all of those "earlier" in a transaction) have completed.
Whenever there is a need to send a request (a set of TREs) to the
IPA, a GSI transaction is allocated, specifying the number of TREs
that will be required. Details of the request (e.g. transfer offsets
and length) are represented by in a Linux scatterlist array that is
incorporated in the transaction structure.
Once all commands (TREs) are added to a transaction it is committed.
When the hardware signals that the request has completed, a callback
function allows for cleanup or followup activity to be performed
before the transaction is freed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch provides interface functions supplied by the IPA layer
that are called from the GSI layer. One function is called when a
GSI transaction has completed. The others allow the GSI layer to
inform the IPA layer when the hardware has been told it has new TREs
to execute, and when the hardware has indicated transactions have
completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch includes "gsi.c", which implements the generic software
interface (GSI) for IPA. The generic software interface abstracts
channels, which provide a means of transferring data either from the
AP to the IPA, or from the IPA to the AP. A ring buffer of "transfer
elements" (TREs) is used to describe data transfers to perform. The
AP writes a doorbell register associated with a channel to let it know
it has added new entries (for an AP->IPA channel) or has finished
processing entries (for an IPA->AP channel).
Each channel also has an event ring buffer, used by the IPA to
communicate information about events related to a channel (for
example, the completion of TREs). The IPA writes its own doorbell
register, which triggers an interrupt on the AP, to signal that
new event information has arrived.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Generic Software Interface is a layer of the IPA driver that
abstracts the underlying hardware. The next patch includes the
main code for GSI (including some additional documentation). This
patch just includes three GSI header files.
- "gsi.h" is the top-level GSI header file. This structure is
is embedded within the IPA structure. The main abstraction
implemented by the GSI code is the channel, and this header
exposes several operations that can be performed on a GSI channel.
- "gsi_private.h" exposes some definitions that are intended to be
private, used only by the main GSI code and the GSI transaction
code (defined in an upcoming patch).
- Like "ipa_reg.h", "gsi_reg.h" defines the offsets of the 32-bit
registers used by the GSI layer, along with masks that define the
position and width of fields less than 32 bits located within
these registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch incorporates three source files (and their headers). They're
grouped into one patch mainly for the purpose of making the number and
size of patches in this series somewhat reasonable.
- "ipa_clock.c" and "ipa_clock.h" implement clocking for the IPA device.
The IPA has a single core clock managed by the common clock framework.
In addition, the IPA has three buses whose bandwidth is managed by the
Linux interconnect framework. At this time the core clock and all
three buses are either on or off; we don't yet do any more fine-grained
management than that. The core clock and interconnects are enabled
and disabled as a unit, using a unified clock-like abstraction,
ipa_clock_get()/ipa_clock_put().
- "ipa_interrupt.c" and "ipa_interrupt.h" implement IPA interrupts.
There are two hardware IRQs used by the IPA driver (the other is
the GSI interrupt, described in a separate patch). Several types
of interrupt are handled by the IPA IRQ handler; these are not part
of data/fast path.
- The IPA has a region of local memory that is accessible by the AP
(and modem). Within that region are areas with certain defined
purposes. "ipa_mem.c" and "ipa_mem.h" define those regions, and
implement their initialization.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch defines configuration data that is used to specify some
of the details of IPA hardware supported by the driver. It is built
as Device Tree match data, discovered at boot time. The driver
supports the Qualcomm SDM845 SoC. Data for the Qualcomm SC7180 is
also defined here, but it is not yet completely supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch includes three source files that represent some basic "main
program" code for the IPA driver. They are:
- "ipa.h" defines the top-level IPA structure which represents an IPA
device throughout the code.
- "ipa_main.c" contains the platform driver probe function, along with
some general code used during initialization.
- "ipa_reg.h" defines the offsets of the 32-bit registers used for the
IPA device, along with masks that define the position and width of
fields within these registers.
- "version.h" defines some symbolic IPA version numbers.
Each file includes some documentation that provides a little more
overview of how the code is organized and used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the binding definitions for the "qcom,ipa" device tree node.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up a subdev in the q6v5 modem remoteproc driver that generates
event notifications for the IPA driver to use for initialization and
recovery following a modem shutdown or crash.
A pair of new functions provides a way for the IPA driver to register
and deregister a notification callback function that will be called
whenever modem events (about to boot, running, about to shut down,
etc.) occur. A void pointer value (provided by the IPA driver at
registration time) and an event type are supplied to the callback
function.
One event, MODEM_REMOVING, is signaled whenever the q6v5 driver is
about to remove the notification subdevice. It requires the IPA
driver de-register its callback.
This sub-device is only used by the modem subsystem (MSS) driver,
so the code that adds the new subdev and allows registration and
deregistration of the notifier is found in "qcom_q6v6_mss.c".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sascha Hauer says:
====================
QorIQ DPAA: Use random MAC address when none is given
Use random MAC addresses when they are not provided in the device tree.
Tested on LS1046ARDB.
Changes in v3:
addressed all MAC types, removed some redundant code in dtsec in
the process
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If there is no valid MAC address in the device tree, use a random
MAC address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the initialization of the MAC to be performed even if the
device tree does not provide a valid MAC address. Later a random
MAC address should be assigned by the Ethernet driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the set_mac_address() in the init() function.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Updates.
This series includes simplification and improvement of NAPI polling
logic in bnxt_poll_p5(). The improvements will prevent starving the
async events from firmware if we are in continuous NAPI polling.
The rest of the patches include cleanups, a better return code for
firmware busy, and to clear devlink port type more properly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to other drivers, properly clear the devlink port type when
removing the device before unregistration.
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If firmware command returns error code as HWRM_ERR_CODE_BUSY, which
means it cannot handle the command due to a conflicting command
from another function, convert it to -EAGAIN. If it is an ethtool
operation, this error code will be returned to userspace.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return code is not needed in some of these functions, as the return
code from firmware message is ignored. Remove the unused rc variable
and also convert functions to void.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of converting error code in firmware message to standard
code, checking for firmware return code is removed in most of the
places. Remove the assignment of return code where the function
can directly return.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver stores a copy of the DCB settings that have been applied to
the firmware. After firmware reset, the firmware settings are gone and
will revert back to default. Clear the driver's copy so that if there
is a DCBNL request to get the settings, the driver will retrieve the
current settings from the firmware. lldpad keeps the DCB settings in
userspace and will re-apply the settings if it is running.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we are in continuous NAPI polling mode, the current code in
bnxt_poll_p5() will only process the completion rings and will not
process the NQ until interrupt is re-enabled. Tis logic works and
will not cause RX or TX starvation, but async events in the NQ may
be delayed for the duration of continuous NAPI polling. These
async events may be firmware or VF events.
Continue to handle the NQ after we are done polling the completion
rings. This actually simplies the code in bnxt_poll_p5().
Acknowledge the NQ so these async events will not overflow.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the function by removing tha 'all' parameter. In the current
code, the caller has to specify whether to update/arm both completion
rings with the 'all' parameter.
Instead of this, we can just update/arm all the completion rings
that have been polled. By setting cpr->had_work_done earlier in
__bnxt_poll_work(), we know which completion ring has been polled
and can just update/arm all the completion rings with
cpr->had_work_done set.
This simplifies the function with one less parameter and works just
as well.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bnxt_poll_p5(), the logic polls for up to 2 completion rings (RX and
TX) for work. In the current code, if we reach budget polling the
first completion ring, we will stop. If the other completion ring
has work to do, we will handle it when NAPI calls us back.
This is not optimal. We potentially leave an unproceesed entry in
the NQ. When we are finally done with NAPI polling and re-enable
interrupt, the remaining entry in the NQ will cause interrupt to
be triggered immediately for no reason.
Modify the code in bnxt_poll_p5() to keep looping until all NQ
entries are handled even if the first completion ring has reached
budget.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rmnet_vnd_setup(), which is the callback of ->ndo_start_xmit() is
allowed to call concurrently because it uses RCU protected data.
So, it doesn't need tx lock.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo says:
====================
bareudp: several code cleanup for bareudp module
This patchset is to cleanup bareudp module code.
1. The first patch is to add module alias
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.
2. The second patch is to add extack message.
The extack error message is useful for noticing specific errors
when command is failed.
3. The third patch is to remove unnecessary udp_encap_enable().
In the bareudp_socket_create(), udp_encap_enable() is called.
But, the it's already called in the setup_udp_tunnel_sock().
So, it could be removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current code, udp_encap_enable() is called in
bareudp_socket_create().
But, setup_udp_tunnel_sock() internally calls udp_encap_enable().
So, udp_encap_enable() is unnecessary.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bareudp netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rohit Maheshwari says:
====================
cxgb4/chcr: ktls tx ofld support on T6 adapter
This series of patches add support for kernel tls offload in Tx direction,
over Chelsio T6 NICs. SKBs marked as decrypted will be treated as tls plain
text packets and then offloaded to encrypt using network device (chelsio T6
adapter).
This series is broken down as follows:
Patch 1 defines a new macro and registers tls_dev_add and tls_dev_del
callbacks. When tls_dev_add gets called we send a connection request to
our hardware and to make HW understand about tls offload. Its a partial
connection setup and only ipv4 part is done.
Patch 2 handles the HW response of the connection request and then we
request to update TCB and handle it's HW response as well. Also we save
crypto key locally. Only supporting TLS_CIPHER_AES_GCM_128_KEY_SIZE.
Patch 3 handles tls marked skbs (decrypted bit set) and sends it to ULD for
crypto handling. This code has a minimal portion of tx handler, to handle
only one complete record per skb.
Patch 4 hanldes partial end part of records. Also added logic to handle
multiple records in one single skb. It also adds support to send out tcp
option(/s) if exists in skb. If a record is partial but has end part of a
record, we'll fetch complete record and then only send it to HW to generate
HASH on complete record.
Patch 5 handles partial first or middle part of record, it uses AES_CTR to
encrypt the partial record. If we are trying to send middle record, it's
start should be 16 byte aligned, so we'll fetch few earlier bytes from the
record and then send it to HW for encryption.
Patch 6 enables ipv6 support and also includes ktls startistics.
v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.
- optimized tcb update using control queue.
- state machine handling when earlier states received.
- chcr_write_cpl_set_tcb_ulp function is shifted to patch3.
- un-necessary updating left variable.
v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>
- mss calculation logic.
- correct place for Alloc skb check.
- Replaced atomic_t with atomic64_t
- added few more statistics counters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
