The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.)
access an image of the HPT in userspace memory using copy_from_user
and copy_to_user. Recently, the declarations of those functions were
annotated to indicate that the return value must be checked. Since
this code doesn't currently check the return value, this causes
compile warnings like the ones shown below, and since on PPC the
default is to compile arch/powerpc with -Werror, this causes the
build to fail.
To fix this, we check the return values, and if non-zero, fail the
hypercall being processed with a H_FUNCTION error return value.
There is really no good error return value to use since PAPR didn't
envisage the possibility that the hypervisor may not be able to access
the guest's HPT, and H_FUNCTION (function not supported) seems as
good as any.
The typical compile warnings look like this:
CC arch/powerpc/kvm/book3s_pr_papr.o
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’:
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result]
copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
^
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result]
copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
^
... etc.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
POWER9 running a radix guest will take some hypervisor interrupts
without going to real mode (turning off the MMU). This means that
early hypercall handlers may now be called in virtual mode. Most of
the handlers work just fine in both modes, but there are some that
can crash the host if called in virtual mode, notably the TCE (IOMMU)
hypercalls H_PUT_TCE, H_STUFF_TCE and H_PUT_TCE_INDIRECT. These
already have both a real-mode and a virtual-mode version, so we
arrange for the real-mode version to return H_TOO_HARD for radix
guests, which will result in the virtual-mode version being called.
The other hypercall which is sensitive to the MMU mode is H_RANDOM.
It doesn't have a virtual-mode version, so this adds code to enable
it to be called in either mode.
An alternative solution was considered which would refuse to call any
of the early hypercall handlers when doing a virtual-mode exit from a
radix guest. However, the XICS-on-XIVE code depends on the XICS
hypercalls being handled early even for virtual-mode exits, because
the handlers need to be called before the XIVE vCPU state has been
pulled off the hardware. Therefore that solution would have become
quite invasive and complicated, and was rejected in favour of the
simpler, though less elegant, solution presented here.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Changes include:
- A fix related to the 32-bit idmap stub
- A fix to the bitmask used to deode the operands of an AArch32 CP
instruction
- We have moved the files shared between arch/arm/kvm and
arch/arm64/kvm to virt/kvm/arm
- We add support for saving/restoring the virtual ITS state to
userspace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZEZihAAoJEEtpOizt6ddyGDYH/jmGjDMnryORn2P2o10dUQKJ
RnHTQYnpOYqnprlkFtZFpmK+mjl/a8R1Btb7GK2EwmovTR95pMYPRqtrCTOL0aQA
4OToh7+vFGatwxsGCS6utazdhmx0UT/LhO/GEF4G1zOb7eVa4ZtS1NKLP2WjPD1E
RU3Qn8wa0pESv3tJScv8qo2+PWVX4krbFllhY2Hk0AkVQcI66ExkdVq4ikm1eUXn
rxzIayLG2bv3KEPNCzozdwoY9tDL+b40q6vN/RHGJmM05SZbbSx2/Bkw2RbslSpD
2hvhHWX7xeuEBcd5mZO7sP4WS3hM/BI8eX7q+uMeNJ9B+nM82yjGfOTtglVi2cc=
=JfvQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.12-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
Second round of KVM/ARM Changes for v4.12.
Changes include:
- A fix related to the 32-bit idmap stub
- A fix to the bitmask used to deode the operands of an AArch32 CP
instruction
- We have moved the files shared between arch/arm/kvm and
arch/arm64/kvm to virt/kvm/arm
- We add support for saving/restoring the virtual ITS state to
userspace
When failing to restore the ITT for a DTE, we should remove the failed
device entry from the list and free the object.
We slightly refactor vgic_its_destroy to be able to reuse the now
separate vgic_its_free_dte() function.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The only reason we called kvm_vgic_map_resources() when restoring the
ITS tables was because we wanted to have the KVM iodevs registered in
the KVM IO bus framework at the time when the ITS was restored such that
a restored and active device can inject MSIs prior to otherwise calling
kvm_vgic_map_resources() from the first run of a VCPU.
Since we now register the KVM iodevs for the redestributors and ITS as
soon as possible (when setting the base addresses), we no longer need
this call and kvm_vgic_map_resources() is again called only when first
running a VCPU.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
We have to register the ITS iodevice before running the VM, because in
migration scenarios, we may be restoring a live device that wishes to
inject MSIs before the VCPUs have started.
All we need to register the ITS io device is the base address of the
ITS, so we can simply register that when the base address of the ITS is
set.
[ Code to fix concurrency issues when setting the ITS base address and
to fix the undef base address check written by Marc Zyngier ]
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The its->initialized doesn't bring much to the table, and creates
unnecessary ordering between setting the address and initializing it
(which amounts to exactly nothing).
Let's kill it altogether, making KVM_DEV_ARM_VGIC_CTRL_INIT the no-op
it deserves to be.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Instead of waiting with registering KVM iodevs until the first VCPU is
run, we can actually create the iodevs when the redist base address is
set. The only downside is that we must now also check if we need to do
this for VCPUs which are created after creating the VGIC, because there
is no enforced ordering between creating the VGIC (and setting its base
addresses) and creating the VCPUs.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
As we are about to handle setting the address for the redistributor base
region separately from some of the other base addresses, let's rework
this function to leave a little more room for being flexible in what
each type of base address does.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
As we are about to fiddle with the IO device registration mechanism,
let's be a little more careful when setting base addresses as early as
possible. When setting a base address, we can check that there's
address space enough for its scope and when the last of the two
base addresses (dist and redist) get set, we can also check if the
regions overlap at that time.
This allows us to provide error messages to the user at time when trying
to set the base address, as opposed to later when trying to run the VM.
To do this, we make vgic_v3_check_base available in the core vgic-v3
code as well as in the other parts of the GICv3 code, namely the MMIO
config code.
We also return true for undefined base addresses so that the function
can be used before all base addresses are set; all callers already check
for uninitialized addresses before calling this function.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Split out the function to register all the redistributor iodevs into a
function that handles a single redistributor at a time in preparation
for being able to call this per VCPU as these get created.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
There are occasional needs to use the index of vcpu in the kvm->vcpus
array to map something related to a VCPU. For example, unlike the
vcpu->vcpu_id, the vcpu index is guaranteed to not be sparse across all
vcpus which is useful when allocating a memory area for each vcpu.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Advertise the PML bit in vmcs12 but don't try to enable
it in hardware when running L2 since L0 is emulating it. Also,
preserve L0's settings for PML since it may still
want to log writes.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With EPT A/D enabled, processor access to L2 guest
paging structures will result in a write violation.
When this happens, write the GUEST_PHYSICAL_ADDRESS
to the pml buffer provided by L1 if the access is
write and the dirty bit is being set.
This patch also adds necessary checks during VMEntry if L1
has enabled PML. If the PML index overflows, we change the
exit reason and run L1 to simulate a PML full event.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM updates accessed/dirty bits, this hook can be used
to invoke an arch specific function that implements/emulates
dirty logging such as PML.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, the CR3-target count must not be greater than
4. Future processors may support a different number of CR3-target
values. Software should read the VMX capability MSR IA32_VMX_MISC to
determine the number of values supported.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The main thing here is a new implementation of the in-kernel
XICS interrupt controller emulation for POWER9 machines, from Ben
Herrenschmidt.
POWER9 has a new interrupt controller called XIVE (eXternal Interrupt
Virtualization Engine) which is able to deliver interrupts directly
to guest virtual CPUs in hardware without hypervisor intervention.
With this new code, the guest still sees the old XICS interface but
performance is better because the XICS emulation in the host uses the
XIVE directly rather than going through a XICS emulation in firmware.
Conflicts:
arch/powerpc/kernel/cpu_setup_power.S [cherry-picked fix]
arch/powerpc/kvm/book3s_xive.c [include asm/debugfs.h]
In vm_stat_get_per_vm_fops and vcpu_stat_get_per_vm_fops, since we
use nonseekable_open() to open, we should use no_llseek() to seek,
not generic_file_llseek().
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function really doesn't init anything, it enables the CPU
interface, so name it as such, which gives us the name to use for actual
init work later on.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Clarify what is meant by the save/restore ABI only supporting virtual
physical interrupts.
Relax the requirement of the order that the collection entries are
written in and be clear that there is no particular ordering enforced.
Some cosmetic changes in the capitalization of ID names to align with
the GICv3 manual and remove the empty line in the bottom of the patch.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
This update consists of:
-- important fixes for build failures and clean target related warnings
to address regressions introduced in:
88baa78d1f ("selftests: remove duplicated all and clean target")
-- several minor spelling fixes in and log messages and comment blocks.
-- Enabling configs for better test coverage in ftrace, vm, cpufreq tests.
-- .gitignore changes
-----BEGIN PGP SIGNATURE-----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=9Fo1
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This update consists of:
- important fixes for build failures and clean target related
warnings to address regressions introduced in commit 88baa78d1f
("selftests: remove duplicated all and clean target")
- several minor spelling fixes in and log messages and comment
blocks.
- Enabling configs for better test coverage in ftrace, vm, and
cpufreq tests.
- .gitignore changes"
* tag 'linux-kselftest-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (26 commits)
selftests: x86: add missing executables to .gitignore
selftests: watchdog: accept multiple params on command line
selftests: create cpufreq kconfig fragments
selftests: x86: override clean in lib.mk to fix warnings
selftests: sync: override clean in lib.mk to fix warnings
selftests: splice: override clean in lib.mk to fix warnings
selftests: gpio: fix clean target to remove all generated files and dirs
selftests: add gpio generated files to .gitignore
selftests: powerpc: override clean in lib.mk to fix warnings
selftests: gpio: override clean in lib.mk to fix warnings
selftests: futex: override clean in lib.mk to fix warnings
selftests: lib.mk: define CLEAN macro to allow Makefiles to override clean
selftests: splice: fix clean target to not remove default_file_splice_read.sh
selftests: gpio: add config fragment for gpio-mockup
selftests: breakpoints: allow to cross-compile for aarch64/arm64
selftests/Makefile: Add missed PHONY targets
selftests/vm/run_vmtests: Fix wrong comment
selftests/Makefile: Add missed closing `"` in comment
selftests/vm/run_vmtests: Polish output text
selftests/timers: fix spelling mistake: "Asynchronous"
...
The first one is just a switch from using strcpy() to strlcpy(). Someone
thought that it may cause an overflow bug, but since it only copies comms
into a pre-allocated array of TASK_COMM_LEN, and no comm should ever
be bigger than that, nor not end with a nul character, this change is more
of a safety precaution than fixing anything that is actually broken.
The other two changes are simply cleaning and optimizing some code.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZEKYJFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
+NcH/jK6ELGykogqi2FfLNzwJTjVpHdKrrMKyxHcC+jXv3mJUyK+0qKHkCO6zyy1
EWAbTrSMjHGG6r6AP42QLRRehsijk7xXjJm86T771PNtSgY4xCKobFisk73KR4YB
2Y1JXkSpKH2kKgdixR9hcg4h5RTv16KeAMu2cLSMxRfDEr1mBvv7LU8ZrobJSx2C
LGR/241bTxOB6mWCmjqSTVrhHyEAMgJhVwV+ym7qfjqQULGhgFmq3CVTicFU0PWx
UkzrcwYT2T56jU3Ngu/e1KkEZq0/rG7O86iSxgwnuraW4n48u3rpkl/q9eZ029Hd
/kxyyXBKQDxx6cQd4hZrYUTW4IU=
=8/K8
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"These are three simple changes.
The first one is just a switch from using strcpy() to strlcpy().
Someone thought that it may cause an overflow bug, but since it only
copies comms into a pre-allocated array of TASK_COMM_LEN, and no comm
should ever be bigger than that, nor not end with a nul character,
this change is more of a safety precaution than fixing anything that
is actually broken.
The other two changes are simply cleaning and optimizing some code"
* tag 'trace-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Simplify ftrace_match_record() even more
ftrace: Remove an unneeded condition
tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()
- mlx5/IPoIB fixup patch
-----BEGIN PGP SIGNATURE-----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=Ihe9
-----END PGP SIGNATURE-----
mergetag object 67cf3623e0
type commit
tag for-next
tagger Doug Ledford <dledford@redhat.com> 1493940800 -0400
Updates #3 for 4.12 kernel merge window
- The hfi1 15 patch set that landed late
- IPoIB get_link_ksettings which landed late because I asked for a
respin
- One late rxe change
- One -rc worthy fix that's in early
-----BEGIN PGP SIGNATURE-----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=H9f5
-----END PGP SIGNATURE-----
Merge tags 'for-linus' and 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma updates from Doug Ledford:
"As mentioned in my first pull request, this is the subsequent pull
requests I had. This is all I have, and in fact this cleans out the
RDMA subsystem's entire patchworks queue of kernel changes that are
ready to go (well, it did for the weekend anyway, a few new patches
are in, but they'll be coming during the -rc cycle).
The first tag contains a single patch that would have conflicted if
taken from my tree or DaveM's tree as it needed our trees merged to
come cleanly.
The second tag contains the patch series from Intel plus three other
stragllers that came in late last week. I took them because it allowed
me to legitimately claim that the RDMA patchworks queue was, for a
short time, 100% cleared of all waiting kernel patches, woohoo! :-).
I have it under my for-next tag, so it did get 0day and linux- next
over the end of last week, and linux-next did show one minor conflict.
Summary:
'for-linus' tag:
- mlx5/IPoIB fixup patch
'for-next' tag:
- the hfi1 15 patch set that landed late
- IPoIB get_link_ksettings which landed late because I asked for a
respin
- one late rxe change
- one -rc worthy fix that's in early"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Enable IPoIB acceleration
* tag 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
rxe: expose num_possible_cpus() cnum_comp_vectors
IB/rxe: Update caller's CRC for RXE_MEM_TYPE_DMA memory type
IB/hfi1: Clean up on context initialization failure
IB/hfi1: Fix an assign/ordering issue with shared context IDs
IB/hfi1: Clean up context initialization
IB/hfi1: Correctly clear the pkey
IB/hfi1: Search shared contexts on the opened device, not all devices
IB/hfi1: Remove atomic operations for SDMA_REQ_HAVE_AHG bit
IB/hfi1: Use filedata rather than filepointer
IB/hfi1: Name function prototype parameters
IB/hfi1: Fix a subcontext memory leak
IB/hfi1: Return an error on memory allocation failure
IB/hfi1: Adjust default eager_buffer_size to 8MB
IB/hfi1: Get rid of divide when setting the tx request header
IB/hfi1: Fix yield logic in send engine
IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache line
IB/hfi1: Fix checks for Offline transient state
IB/ipoib: add get_link_ksettings in ethtool
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eE4D
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add framework for supporting PCIe devices in Endpoint mode (Kishon
Vijay Abraham I)
- use non-postable PCI config space mappings when possible (Lorenzo
Pieralisi)
- clean up and unify mmap of PCI BARs (David Woodhouse)
- export and unify Function Level Reset support (Christoph Hellwig)
- avoid FLR for Intel 82579 NICs (Sasha Neftin)
- add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)
- short-circuit config access failures for disconnected devices (Keith
Busch)
- remove D3 sleep delay when possible (Adrian Hunter)
- freeze PME scan before suspending devices (Lukas Wunner)
- stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)
- disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)
- add arch-specific alignment control to improve device passthrough by
avoiding multiple BARs in a page (Yongji Xie)
- add sysfs sriov_drivers_autoprobe to control VF driver binding
(Bodong Wang)
- allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)
- fix crashes when unbinding host controllers that don't support
removal (Brian Norris)
- add driver for MicroSemi Switchtec management interface (Logan
Gunthorpe)
- add driver for Faraday Technology FTPCI100 host bridge (Linus
Walleij)
- add i.MX7D support (Andrey Smirnov)
- use generic MSI support for Aardvark (Thomas Petazzoni)
- make Rockchip driver modular (Brian Norris)
- advertise 128-byte Read Completion Boundary support for Rockchip
(Shawn Lin)
- advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)
- convert atomic_t to refcount_t in HV driver (Elena Reshetova)
- add CPU IRQ affinity in HV driver (K. Y. Srinivasan)
- fix PCI bus removal in HV driver (Long Li)
- add support for ThunderX2 DMA alias topology (Jayachandran C)
- add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)
- add ITE 8893 bridge DMA alias quirk (Jarod Wilson)
- restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(Manish Jaggi)
* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
PCI: Don't allow unbinding host controllers that aren't prepared
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
MAINTAINERS: Add PCI Endpoint maintainer
Documentation: PCI: Add userguide for PCI endpoint test function
tools: PCI: Add sample test script to invoke pcitest
tools: PCI: Add a userspace tool to test PCI endpoint
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
misc: Add host side PCI driver for PCI test function device
PCI: Add device IDs for DRA74x and DRA72x
dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
PCI: dwc: dra7xx: Add EP mode support
PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
dt-bindings: PCI: Add DT bindings for PCI designware EP mode
PCI: dwc: designware: Add EP mode support
Documentation: PCI: Add binding documentation for pci-test endpoint function
ixgbe: Use pcie_flr() instead of duplicating it
IB/hfi1: Use pcie_flr() instead of duplicating it
PCI: imx6: Fix spelling mistake: "contol" -> "control"
...
Here is the "big" TTY/Serial patch updates for 4.12-rc1
Not a lot of new things here, the normal number of serial driver updates
and additions, tiny bugs fixed, and some core files split up to make
future changes a bit easier for Nicolas's "tiny-tty" work.
All of these have been in linux-next for a while. There will be a merge
conflict with include/linux/serdev.h coming from the bluetooth tree
merge, which we knew about, as we wanted some of the serdev changes to
go in through that tree. I'll send the expected merge result as a
follow-on message.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWRA9rw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn8OwCXSoCtZMGl25ohu1osCL5G0UEMtgCg2Z9k7hDk
LpQTTN98hHn/VwM47ro=
=X8sk
-----END PGP SIGNATURE-----
Merge tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the "big" TTY/Serial patch updates for 4.12-rc1
Not a lot of new things here, the normal number of serial driver
updates and additions, tiny bugs fixed, and some core files split up
to make future changes a bit easier for Nicolas's "tiny-tty" work.
All of these have been in linux-next for a while"
* tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits)
serial: small Makefile reordering
tty: split job control support into a file of its own
tty: move baudrate handling code to a file of its own
console: move console_init() out of tty_io.c
serial: 8250_early: Add earlycon support for Palmchip UART
tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44
vt: make mouse selection of non-ASCII consistent
vt: set mouse selection word-chars to gpm's default
imx-serial: Reduce RX DMA startup latency when opening for reading
serial: omap: suspend device on probe errors
serial: omap: fix runtime-pm handling on unbind
tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init
serial: samsung: Remove useless spinlock
serial: samsung: Add missing checks for dma_map_single failure
serial: samsung: Use right device for DMA-mapping calls
serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
tty: fix comment typo s/repsonsible/responsible/
tty: amba-pl011: Fix spurious TX interrupts
serial: xuartps: Enable clocks in the pm disable case also
serial: core: Re-use struct uart_port {name} field
...
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
drivers/staging/ccree/ssi_hash.c:1990: error: unknown field 'template_ahash' specified in initializer
drivers/staging/ccree/ssi_hash.c:1991: error: unknown field 'init' specified in initializer
drivers/staging/ccree/ssi_hash.c:1991: warning: missing braces around initializer
drivers/staging/ccree/ssi_hash.c:1991: warning: (near initialization for 'driver_hash[0].<anonymous>.template_ahash')
drivers/staging/ccree/ssi_hash.c:1992: error: unknown field 'update' specified in initializer
drivers/staging/ccree/ssi_hash.c:1992: warning: excess elements in union initializer
drivers/staging/ccree/ssi_hash.c:1992: warning: (near initialization for 'driver_hash[0].<anonymous>')
drivers/staging/ccree/ssi_hash.c:1993: error: unknown field 'final' specified in initializer
drivers/staging/ccree/ssi_hash.c:1993: warning: excess elements in union initializer
drivers/staging/ccree/ssi_hash.c:1993: warning: (near initialization for 'driver_hash[0].<anonymous>')
...
gcc-4.4.4 has issues with anon union initializers. Work around this.
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This verifies virtual address mapping below and above the 128TB range
and makes sure that address returned are within the expected range
depending upon the hint passed from the user space.
Link: http://lkml.kernel.org/r/20170418095252.20533-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a tracepoint to dax_insert_mapping(), following the same logging
conventions as the rest of DAX. This tracepoint, along with the one in
dax_load_hole(), lets us know how a DAX PTE fault was serviced.
Here is an example DAX fault that inserts a PTE mapping:
small-1126 [007] ....
145.451604: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220
small-1126 [007] ....
145.452317: dax_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10420000 radix_entry 0x100006
small-1126 [007] ....
145.452399: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-7-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a tracepoint to dax_writeback_one(), following the same logging
conventions as the rest of DAX.
Here is an example range writeback which ends up flushing one PMD and
one PTE:
test-1265 [003] ....
496.615250: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff
test-1265 [003] ....
496.616263: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x0 pglen 0x200
test-1265 [003] ....
496.616270: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x305 pglen 0x1
test-1265 [003] ....
496.616272: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff
[akpm@linux-foundation.org: struct blk_dax_ctl has disappeared]
Link: http://lkml.kernel.org/r/20170221195116.13278-6-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add tracepoints to dax_writeback_mapping_range(), following the same
logging conventions as the rest of DAX.
Here is an example writeback call:
msync-1085 [006] ....
200.902565: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff
msync-1085 [006] ....
200.902579: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff
[ross.zwisler@linux.intel.com: fix regression in dax_writeback_mapping_range()]
Link: http://lkml.kernel.org/r/20170314215358.31451-1-ross.zwisler@linux.intel.com
Link: http://lkml.kernel.org/r/20170221195116.13278-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add tracepoints to dax_load_hole(), following the same logging conventions
as the rest of DAX.
Here is the logging generated by a PTE read from a hole:
read-1075 [002] ....
62.362108: dax_pte_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280
read-1075 [002] ....
62.362140: dax_load_hole: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
read-1075 [002] ....
62.362141: dax_pte_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add tracepoints to dax_pfn_mkwrite(), following the same logging
conventions as the rest of DAX.
Here is an example PTE fault followed by a pfn_mkwrite:
small_aligned-1094 [002] ....
374.084998: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200
small_aligned-1094 [002] ....
374.085145: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 MAJOR|NOPAGE
small_aligned-1094 [002] ....
374.085165: dax_pfn_mkwrite: dev 259:0 ino 0x1003 shared WRITE|MKWRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-3-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "second round of tracepoints for DAX".
This second round of DAX tracepoint patches adds tracing to the PTE
fault path (dax_iomap_pte_fault(), dax_pfn_mkwrite(), dax_load_hole(),
dax_insert_mapping()) and to the writeback path
(dax_writeback_mapping_range(), dax_writeback_one()).
The purpose of this tracing is to give us a high level view of what DAX
is doing, whether faults are being serviced by PMDs or PTEs, and by real
storage or by zero pages covering holes.
I do have some patches nearly ready which also add tracing to
grab_mapping_entry() and dax_insert_mapping_entry(). These are more
targeted at logging how we are interacting with the radix tree, how we
use empty entries for locking, whether we "downgrade" huge zero pages to
4k PTE sized allocations, etc. In the end it seemed to me that this
might be too detailed to have as constantly present tracepoints, but if
anyone sees value in having tracepoints like this in the DAX code
permanently (Jan?), please let me know and I'll add those last two
patches.
All these tracepoints were done to be consistent with the style of the
XFS tracepoints and with the existing DAX PMD tracepoints.
This patch (of 6):
Add tracepoints to dax_iomap_pte_fault(), following the same logging
conventions as the rest of DAX.
Here is an example fault that initially tries to be serviced by the PMD
fault handler but which falls back to PTEs because the VMA isn't large
enough to hold a PMD:
small-1086 [005] ....
71.140014: xfs_filemap_huge_fault: dev 259:0 ino 0x1003
small-1086 [005] ....
71.140027: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400
small-1086 [005] ....
71.140028: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 FALLBACK
small-1086 [005] ....
71.140035: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220
small-1086 [005] ....
71.140396: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nandsim has own functions set_memalloc() and clear_memalloc() for robust
setting and clearing of PF_MEMALLOC. Replace them by the new generic
helpers. No functional change.
Link: http://lkml.kernel.org/r/20170405074700.29871-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We now have memalloc_noreclaim_{save,restore} helpers for robust setting
and clearing of PF_MEMALLOC. Let's convert the code which was using the
generic tsk_restore_flags(). No functional change.
[vbabka@suse.cz: in net/core/sock.c the hunk is missing]
Link: http://lkml.kernel.org/r/20170405074700.29871-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Wouter Verhelst <w@uter.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous patch ("mm: prevent potential recursive reclaim due to
clearing PF_MEMALLOC") has shown that simply setting and clearing
PF_MEMALLOC in current->flags can result in wrongly clearing a
pre-existing PF_MEMALLOC flag and potentially lead to recursive reclaim.
Let's introduce helpers that support proper nesting by saving the
previous stat of the flag, similar to the existing memalloc_noio_* and
memalloc_nofs_* helpers. Convert existing setting/clearing of
PF_MEMALLOC within mm to the new helpers.
There are no known issues with the converted code, but the change makes
it more robust.
Link: http://lkml.kernel.org/r/20170405074700.29871-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "more robust PF_MEMALLOC handling"
This series aims to unify the setting and clearing of PF_MEMALLOC, which
prevents recursive reclaim. There are some places that clear the flag
unconditionally from current->flags, which may result in clearing a
pre-existing flag. This already resulted in a bug report that Patch 1
fixes (without the new helpers, to make backporting easier). Patch 2
introduces the new helpers, modelled after existing memalloc_noio_* and
memalloc_nofs_* helpers, and converts mm core to use them. Patches 3
and 4 convert non-mm code.
This patch (of 4):
__alloc_pages_direct_compact() sets PF_MEMALLOC to prevent deadlock
during page migration by lock_page() (see the comment in
__unmap_and_move()). Then it unconditionally clears the flag, which can
clear a pre-existing PF_MEMALLOC flag and result in recursive reclaim.
This was not a problem until commit a8161d1ed6 ("mm, page_alloc:
restructure direct compaction handling in slowpath"), because direct
compation was called only after direct reclaim, which was skipped when
PF_MEMALLOC flag was set.
Even now it's only a theoretical issue, as the new callsite of
__alloc_pages_direct_compact() is reached only for costly orders and
when gfp_pfmemalloc_allowed() is true, which means either
__GFP_NOMEMALLOC is in gfp_flags or in_interrupt() is true. There is no
such known context, but let's play it safe and make
__alloc_pages_direct_compact() robust for cases where PF_MEMALLOC is
already set.
Fixes: a8161d1ed6 ("mm, page_alloc: restructure direct compaction handling in slowpath")
Link: http://lkml.kernel.org/r/20170405074700.29871-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although all architectures use a deposited page table for THP on
anonymous VMAs, some architectures (s390 and powerpc) require the
deposited storage even for file backed VMAs due to quirks of their MMUs.
This patch adds support for depositing a table in DAX PMD fault handling
path for archs that require it. Other architectures should see no
functional changes.
Link: http://lkml.kernel.org/r/20170411174233.21902-3-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: linux-nvdimm@ml01.01.org
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Depending on the flags of the PMD being zapped there may or may not be a
deposited pgtable to be freed. In two of the three cases this is open
coded while the third uses the zap_deposited_table() helper. This patch
converts the others to use the helper to clean things up a bit.
Link: http://lkml.kernel.org/r/20170411174233.21902-2-oohall@gmail.com
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: linux-nvdimm@ml01.01.org
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All uses of CURRENT_TIME_SEC and CURRENT_TIME macros have been replaced
by other time functions. These macros are also not y2038 safe. And,
all their use cases can be fulfilled by y2038 safe ktime_get_* variants.
Link: http://lkml.kernel.org/r/1491613030-11599-12-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME macro is not y2038 safe on 32 bit systems.
The patch replaces all the uses of CURRENT_TIME by current_time().
This is also in preparation for the patch that transitions vfs
timestamps to use 64 bit time and hence make them y2038 safe.
current_time() is also planned to be transitioned to y2038 safe behavior
along with this change.
CURRENT_TIME macro will be deleted before merging the aforementioned
change.
Link: http://lkml.kernel.org/r/1491613030-11599-11-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME macro is not y2038 safe on 32 bit systems.
The patch replaces all the uses of CURRENT_TIME by current_time() for
filesystem times, and ktime_get_* functions for others.
struct timespec is also not y2038 safe. Retain timespec for timestamp
representation here as lustre uses it internally everywhere. These
references will be changed to use struct timespec64 in a separate patch.
This is also in preparation for the patch that transitions vfs
timestamps to use 64 bit time and hence make them y2038 safe.
current_time() is also planned to be transitioned to y2038 safe behavior
along with this change.
CURRENT_TIME macro will be deleted before merging the aforementioned
change.
Link: http://lkml.kernel.org/r/1491613030-11599-10-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME_SEC is not y2038 safe. current_time() will be transitioned
to use 64 bit time along with vfs in a separate patch. There is no plan
to transition CURRENT_TIME_SEC to use y2038 safe time interfaces.
current_time() returns timestamps according to the granularities set in
the inode's super_block. The granularity check to call
current_fs_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to update inode timestamp. Use
timespec_trunc during file system creation, before the first inode is
created.
Link: http://lkml.kernel.org/r/1491613030-11599-9-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME is not y2038 safe. Replace it with ktime_get_real_ts64().
Inode time formats are already 64 bit long and accommodates time64_t.
Link: http://lkml.kernel.org/r/1491613030-11599-6-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME is not y2038 safe. The macro will be deleted and all the
references to it will be replaced by ktime_get_* apis.
struct timespec is also not y2038 safe. Retain timespec for timestamp
representation here as ceph uses it internally everywhere. These
references will be changed to use struct timespec64 in a separate patch.
The current_fs_time() api is being changed to use vfs struct inode* as
an argument instead of struct super_block*.
Set the new mds client request r_stamp field using ktime_get_real_ts()
instead of using current_fs_time().
Also, since r_stamp is used as mtime on the server, use timespec_trunc()
to truncate the timestamp, using the right granularity from the
superblock.
This api will be transitioned to be y2038 safe along with vfs.
Link: http://lkml.kernel.org/r/1491613030-11599-5-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
M: Ilya Dryomov <idryomov@gmail.com>
M: "Yan, Zheng" <zyan@redhat.com>
M: Sage Weil <sage@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME macro is not y2038 safe on 32 bit systems.
The patch replaces all the uses of CURRENT_TIME by current_time() for
filesystem times, and ktime_get_* functions for authentication
timestamps and timezone calculations.
This is also in preparation for the patch that transitions vfs
timestamps to use 64 bit time and hence make them y2038 safe.
CURRENT_TIME macro will be deleted before merging the aforementioned
change.
The inode timestamps read from the server are assumed to have correct
granularity and range.
The patch also assumes that the difference between server and client
times lie in the range INT_MIN..INT_MAX. This is valid because this is
the difference between current times between server and client, and the
largest timezone difference is in the range of one day.
All cifs timestamps currently use timespec representation internally.
Authentication and timezone timestamps can also be transitioned into
using timespec64 when all other timestamps for cifs is transitioned to
use timespec64.
Link: http://lkml.kernel.org/r/1491613030-11599-4-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct timespec is not y2038 safe on 32 bit machines and needs to be
replaced by struct timespec64 in order to represent times beyond year
2038 on such machines.
Fix all the timestamp representation in struct trace_hwlat and all the
corresponding implementations.
Link: http://lkml.kernel.org/r/1491613030-11599-3-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME_SEC is not y2038 safe.
Replace use of CURRENT_TIME_SEC with ktime_get_real_seconds in segment
timestamps used by GC algorithm including the segment mtime timestamps.
Link: http://lkml.kernel.org/r/1491613030-11599-2-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
