The wide multiplier is twice as wide, so we need to save twice as much
state. Detect the multiplier type (CPU type) at start up and install
model specific handlers.
[aleksey.makarov@auriga.com:
conflict resolution,
support for old compilers]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Leonid Rosenboim <lrosenboim@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8933/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Allow more compression algorithms as well as uncompressed uImage.bin
to be generated. An uncompressed image might be useful to rule out
problems in the decompression code in the bootloader or even speed
up the boot process at the expense of a bigger uImage file.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9271/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There are currently no gio device drivers that implement suspend/resume
and this patch removes the bus specific legacy suspend and resume callbacks.
This will allow us to eventually remove struct bus_type legacy suspend and
resume support altogether.
gio device drivers wanting to implement suspend and resume can use dev PM
ops which will work out of the box without further modifications necessary.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8920/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The current code uses bits 0-6 of the sys_cpupll register to calculate
core clock speed. However this is only valid on Au1300, on all earlier
models the hardware only uses bits 0-5 to generate core clock.
This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll
is set as well, which ultimately lead the code to calculate a bogus cpu
core clock and also uart base clock down the line.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reported-by: John Crispin <blogic@openwrt.org>
Tested-by: Bruno Randolf <br1@einfach.org>
Cc: stable@vger.kernel.org [v3.17+]
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9279/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
set_cpuspec() has been dropped with commit 074cf65670
("MIPS: Alchemy: remove cpu_table.") in late 2008.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9150/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This was lost during the rewrite of clock framework support.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The Au1000 and Au1500 calculate the LRCLK a bit differently than
newer models: a single bit in MEM_STCFG0 selects if pclk is divided
by 4 or 5.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Clean up white spaces and tabs.
* Get rid of remaining hardcoded values for calculating
shifts and masks.
* Get rid of redundant macro values.
* Do not use page table bits directly in #ifdef's.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9287/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Export the _save_msa asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.
This fixes the following build error when CONFIG_KVM=m and
CONFIG_CPU_HAS_MSA=y due to commit f798217dfd ("KVM: MIPS: Don't leak
FPU/DSP to guest"):
ERROR: "_save_msa" [arch/mips/kvm/kvm.ko] undefined!
Fixes: f798217dfd (KVM: MIPS: Don't leak FPU/DSP to guest)
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/9261/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.
This fixes the following build error when CONFIG_KVM=m due to commit
f798217dfd ("KVM: MIPS: Don't leak FPU/DSP to guest"):
ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: f798217dfd (KVM: MIPS: Don't leak FPU/DSP to guest)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/9260/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Provide correct siginfo_t.si_stime on MIPS64
Bug description:
MIPS version of copy_siginfo() is not aware of alignment on platforms with
64-bit long integers, which leads to an incorrect si_stime passed to signal
handlers, because the last element (si_stime) of _sifields._sigchld is not
copied. If _MIPS_SZLONG is 64, then the _sifields starts at the offset of
4 * sizeof(int).
Patch description:
Use the generic copy_siginfo, which doesn't have this problem.
Signed-off-by: Petr Malat <oss@malat.biz>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8671/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We need to check the ASEs support against the core's CFLAGS instead
of depending to the default -march option from the toolchain.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The loongson 3A cores do not select a suitable -march option so the build
system uses the default one from the toolchain. This may or may not be
suitable for a loongson 3A build. In order to avoid that, we explicitly set
a suitable -march option for that core. Furthermore, some very old
compilers don't support -march= at all and there is the possibility of
toolchain combinations such as GCC 4.9 and binutils 2.24 for which
-march=loongson3a will result in MIPS64 R2 code being generated but then
rejected by GAS. So treat the Longsoon 3A as an R2 CPU.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The previous implementation did not cover all possible FPU combinations
and it silently allowed ABI incompatible objects to be loaded with the
wrong ABI. For example, the previous logic would set the FP_64 ABI as
the matching ABI for an FP_XX object combined with an FP_64A object.
This was wrong, and the matching ABI should have been FP_64A.
The previous logic is now replaced with a new one which determines
the appropriate FPU mode to be used rather than the FP ABI. This has
the advantage that the entire logic is much simpler since it is the FPU
mode we are interested in rather than the FP ABI resulting to code
simplifications. This also removes the now obsolete FP32XX_HYBRID_FPRS
option.
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
A prctl() call to set FR=0 for MIPS R6 should not be allowed
since FR=1 is the only option for R6 cores.
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R2 FPU instructions are also present in MIPS R6 so amend the
preprocessor definitions to take MIPS R6 into consideration.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
The ERETNC instruction, introduced in MIPS R5, is similar to the ERET
one, except it does not clear the LLB bit in the LLADDR register.
This feature is necessary to safely emulate R2 LL/SC instructions.
However, on context switches, we need to clear the LLAddr/LLB bit
in order to make sure that an SC instruction from the new thread
will never succeed if it happens to interrupt an LL operation on the
same address from the previous thread.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 removed quite a few R2 instructions. However, there
is plenty of <R6 userland code so we add an in-kernel emulator
so we can still be able to execute all R2 userland out there.
The emulator comes with a handy debugfs under /mips/ directory
(r2-emul-stats) to provide some basic statistics of the
instructions that are being emulated.
Below are some statistics from booting a minimal buildroot image:
Instruction Total BDslot
------------------------------
movs 236969 0
hilo 56686 0
muls 55279 0
divs 10941 0
dsps 0 0
bops 1 0
traps 0 0
fpus 0 0
loads 214981 17
stores 103364 0
llsc 56898 0
dsemul 150418 0
jr 370158
bltzl 43
bgezl 1594
bltzll 0
bgezll 0
bltzal 39
bgezal 39
beql 14503
bnel 138741
blezl 0
bgtzl 3988
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
If Config5/LLB is set in the core, then software can write the LLB
bit in the LLADDR register.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
The LLBIT (bit 4) in the Config5 CP0 register indicates the software
availability of the Load-Linked bit. This bit is only set by hardware
and it has the following meaning:
0: LLB functionality is not supported
1: LLB functionality is supported. The following feature are also
supported:
- ERETNC instruction. Similar to ERET but it does not clear the LLB
bit in the LLAddr register.
- CP0 LLAddr/LLB bit must be set
- LLbit is software accessible through the LLAddr[0]
This will be used later on to emulate R2 LL/SC instructions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 added the following four instructions which share the
BGTZ and BGTZL opcode:
BLTZALC: Compact branch-and-link if GPR rt is < to zero
BGTZALC: Compact branch-and-link if GPR rt is > to zero
BLTZL : Compact branch if GPR rt is < to zero
BGTZL : Compact branch if GPR rt is > to zero
BLTC : Compact branch if GPR rs is less than GPR rt
BLTUC : Similar to BLTC but unsigned
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 added the following four instructions which share the
BLEZ and BLEZL opcodes:
BLEZALC: Compact branch-and-link if GPR rt is <= to zero
BGEZALC: Compact branch-and-link if GPR rt is >= to zero
BLEZC : Compact branch if GPR rt is <= to zero
BGEZC : Compact branch if GPR rt is >= to zero
BGEC : Compact branch if GPR rs is less than or equal to GPR rt
BGEUC : Similar to BGEC but unsigned.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 introduced the following two branch instructions for COP1:
BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero
BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL,
BGTZL branch likely instructions so we must not try to emulate them on
MIPS R6 if the R2-to-R6 emulator is not present.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
The MIPS R6 JR instruction is an alias to the JALR one, so it may
need emulation for non-R6 userlands.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
The secondary cache initialization and configuration code is processor
specific so we need to handle MIPS R6 cores as well.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
The local_r4k_flush_cache_sigtramp function uses the 'cache'
instruction inside an asm block. However, MIPS R6 changed the
opcode for the cache instruction and as a result of which we
need to set the correct ISA level.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS uses the cpu_has_mips_r2_exec_hazard macro to determine whether the
EHB instruction is available or not. This is necessary for MIPS R6
which also supports the EHB instruction.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
The MIPS R6 pref instruction only has 9 bits for the immediate
field so skip the micro-assembler PREF instruction if the offset
does not fit in 9 bits. Moreover, bit 30 (Pref_PrepareForStore) is
no longer valid in MIPS R6, so we change the default for all MIPS R6
processors to bit 5 (Pref_StoreStreamed).
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 dropped the unaligned load and store instructions so
we need to re-write this part of the code for R6 to store
one byte at a time.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
MIPS R6 does not support the unaligned load and store instructions
so we add a special MIPS R6 case to copy one byte at a time if we
need to read/write to unaligned memory addresses.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
