If user is using DVI->HDMI dongle dual link signal might pose a
problem. Keep single link signal type if clk is lower than
max tmds clk.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link index is an unnecessery level of inderection when
calling from kernel i2c/aux transfer into DAL.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement support for i2c and aux on DCN.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPIOs are used for i2c and other things.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display mode lib handles clock, watermark, and bandwidth
calculations for DCN.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bandwidth and scaling calculations for DCN.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a hard hang observed during resume from S3 when
the system receives a DP short pulse interrupt. This is
because there are two code paths contending for GPIO
access for AUX channel transactions. One such path is
through amdgpu_dm_display_resume() function which is
invoked from the regular system resume code path. The
other path is through handle_hpd_rx_irq(), which is
invoked in response to system receiving DP short pulse
interrupt. handle_hpd_rx_irq() guards against conflicting
GPIO access using hpd_lock, but the GPIO access from
amdgpu_dm_display_resume() remains unguarded.
This patch makes sure we use hpd_lock inside
amdgpu_dm_display_resume() to avoid race conditions
for GPIO access.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric <eric.cook@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ding Wang <Ding.Wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-check for min/max range in freesync calculation and handle it accordingly
Signed-off-by: Eric <eric.cook@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ding Wang <Ding.Wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to avoid null access in case res_ctx is used to access res_pool before it's fully constructed
also make it clear which function has dependency on resource_pool
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement core support to allow for FreeSync Auto Sweep to work
Signed-off-by: Eric Cook <Eric.Cook@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Refacotr PSR to follow correct module pattern
- fix eDP only working on sink index 0.
Signed-off-by: Sylvia Tsai <sylvia.tsai@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change will cache cursor attributes and reprogram them
when enabling cursor after power gating if the attributes were not
yet reprogrammed
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_commit_surfaces_to_stream() function currently
is handle's only one plane at a time.
This will not work if multiple planes have to be set to a crtc.
The functionality of dc_commit_surfaces_to_stream() with this patch
is slit into
1. Accumulate and initialise all the surfaces that needs to be
set to a crtc.
2. Update the intialised set of surfaces to the steam in one go.
Hence dc_commit_surfaces_to_stream() is renamed to init_surfaces().
Once all the planes requested by user space are initialised,
dc_commit_surfaces_to_stream() shall sequentially populates *updates,
*flip_addr, *plane_info and *scaling_info for all surfaces.
BUG: SWDEV-119421
TEST: (On Chromium OS for Stoney Only)
* Chromium UI comes up, on both eDP & DP.
* 'new_surface_count' now changes as per user input for e.g for
all below run tests its 2, without this patch for the below
tests it used to be 1
* Executed below tests to see YUV(underlay) & RGB planes on eDP
plane_test --format XR24 --size 500x100 -p --format YV12 --size 500x500
plane_test --format AR24 --size 500x50 -p --format YV12 --size 150x150
plane_test --format AR24 --size 500x50 -p --format YV12 --size 1366x768
Signed-off-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch populates the YUV surface configurations.
Tests: (On Chromium OS for Stoney Only)
builds without any errors.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to carry it from check to commit
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be needed to clean up context once we add it to private
atomic state.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should make things simpler when we try to rework this later when we
pass validate_context from atomic_check to atomic_commit.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
