On navi1x, vcn dpm scheme was merged into powergating scheme.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause bus hang to access register UVD_STATUS
when VCN is in the state of power gated.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new interface for vcn powrergating and vcn dpm as well.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable vcn powergating in driver for navi10
v2: set vcn pg bit according to AMD_PG_SUPPORT_VCN flag
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For sw control power gating, it needs notify SMU to power up/down VCN
when enter/exit working state.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1). use PREEMPT_QUEUE instead of RESET_QUEUE for gfx ring disablement.
2). Need wait for unmapping queue done before continue execution.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets dpm_enabled flag but don't enable vcn dpm, because vcn dpm
doesn't work so far and we needs to enable the sysfs interfaces.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new registers: mmCGTT_SPI_CLK_CTRL, mmDB_DEBUG3 and
mmGL2C_CGTT_SCLK_CTRL.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This dpm_enabled flag will be recognized as the VCN DPM enabled as well. In fact
VCN/DCN DPM on Navi10 is not good so far, so we cannot enable it for now.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fix the incorrect type of pptable, otherwise, the data will be
totally wrong in parsing phase.
Signed-off-by: Kenneth Feng <Kenneth.Feng@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This header is actually for each asic, so we should not include in smu_v11_0.c.
And rename the one for navi10.
v2: add hack for XGMI (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Getting MAX_FAN_RPM value needs to be read by pptable, so it should be moved to
asic level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new smu power source type, it's to handle the different
AC/DC source defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves the rest of Watermarks_t uses into asic level. It's to avoid
the conflicts with different asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves the rest of SmuMetrics_t uses into asic level. It's to avoid the
conflicts with different asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves the rest of PPTable_t uses into asic level. It's to avoid the
conflicts with different asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch uses the table size member in the structure instead of getting
directly, because the table is different in each asic.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Table id may be different for each asic, so it's good to use this as the input
for common interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nothing was using it. Just replace with smu_update_table
which is what everything was using via a wrapper anyway.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smc tables defines should be in the asic level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TABLE_COUNT should be inited in asic level. Because the value may be different
on each asic even on the same ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new smu table type, it's to handle the different smu table
defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new smu feature type, it's to handle the different feature
mask defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new smu clk type, it's to handle the different ppclk
defines for each asic with the same smu ip.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi10 will use sw smu driver for dynamic power managment,
while vega20 could also use sw smu driver when amdgpu_dpm is
set to 2
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabale DCEFCLK dpm on navi10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
seperate the Vega20 case from navi10 for gfxoff so that gfxoff
won't be allowed on Vega20
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. check the firmware version when enabling gfxoff
2. overwrite the pptable to make sure gfxoff is really
enabled on navi10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.change function return value type: from "unallowed" to "allowed"
2.replace feature mask number with feature macro, the code will clear.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove duplicate code (un-used) in smu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.add smc_firmware_header_v2_1 hfirmware support, support more pptable in smc firmware.
2.optimization current pptable load framework.
3.rename read_pptable_from_vbios with setup_pptable.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add smu11 fw version check for navi10
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the function os is_dpm_running is aisc related function,
so move them to asic file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The read_sensor functions has asic related parts code,
so move them to asic file to implement.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The callback of get[set]_power_profile is asic related function,
so move theme into vega20_ppt file.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the function of conv_profile_to_workload is asic related function,
so move them into vega20_ppt file
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the below smu related power features can be enabled now.
1.Prefetcher
2.GFX DPM
3.SOCCLK DPM
4.MP0CLK DPM
5.LCLK DPM
6.GFX ULV
7.CG
8.PPT
9.TDC
10.GFX EDC
11.VR0HOT
12.Fan Control
13.Thermal Control
14.LED Display
15.MMHub PG
16.ATHub PG
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OD feature isn't enabled on navi10 so skip it for the moment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So far, the gfx/soc dpm is enabled with feature mask set.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver is able to load soft pptable from smc bin file with this function. We
stored the soft pptable in the bottom of smc.bin that the version is v2.
v2: remove is_fw_v2_0 flag.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx 10, rlc firmware loading relies on smu firmware is loaded firstly, so in
direct type, it has to load smc ucode here before rlc. And meanwhile, the smu
initialization has to move after rlc, otherwise, smu message will get failure
during the handshake with rlc and smu.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The navi10_message_map[index] scope should be in PPSMC_Message_Count not in
SMU_MSG_MAX_COUNT.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch bumps smc firmware header version to v2 for storing soft pptable.
v2: fix the typo, and add prints for v2 header
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates smu11 driver if header for navi10 to match 42.09.00 smu
firmware.
v2: clean up comments
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
