Disable bits for ADPA HSYNC and VSYNC where mixed up resulting in suspend
becoming standby and vice versa. Fixed by swapping their bit position.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From the docs:
"IIR can queue up to two interrupt events. When the IIR is cleared,
it will set itself again after one clock if a second event was
stored."
"Only the rising edge of the PCH Display interrupt will cause the
North Display IIR (DEIIR) PCH Display Interrupt even bit to be set,
so all PCH Display Interrupts, including back to back interrupts,
must be cleared before a new PCH Display interrupt can cause DEIIR
to be set".
The current code works fine because we don't get many interrupts, but
if we enable the PCH FIFO underrun interrupts we'll start getting so
many interrupts that at some point new PCH interrupts won't cause
DEIIR to be set.
The initial implementation I tried was to turn the code that checks
SDEIIR into a loop, but we can still get interrupts even after the
loop is done (and before the irq handler finishes), so we have to
either disable the interrupts or mask them. In the end I concluded
that just disabling the PCH interrupts is enough, you don't even need
the loop, so this is what this patch implements. I've tested it and it
passes the 2 "PCH FIFO underrun interrupt storms" I can reproduce:
the "ironlake_crtc_disable" case and the "wrong watermarks" case.
In other words, here's how to reproduce the problem fixed by this
patch:
1 - Enable PCH FIFO underrun interrupts (SERR_INT on SNB+)
2 - Boot the machine
3 - While booting we'll get tons of PCH FIFO underrun interrupts
4 - Plug a new monitor
5 - Run xrandr, notice it won't detect the new monitor
6 - Read SDEIIR and notice it's not 0 while DEIIR is 0
Q: Can't we just clear DEIIR before SDEIIR?
A: It doesn't work. SDEIIR has to be completely cleared (including the
interrupts stored on its back queue) before it can flip DEIIR's bit to
1 again, and even while you're clearing it you'll be getting more and
more interrupts.
Q: Why does it work by just disabling+enabling the south interrupts?
A: Because when we re-enable them, if there's something on the SDEIIR
register (maybe an interrupt stored on the queue), the re-enabling
will make DEIIR's bit flip to 1, and since we'll already have
interrupts enabled we'll get another interrupt, then run our irq
handler again to process the "back" interrupts.
v2: Even bigger commit message, added code comments.
Note that this fixes missed dp aux irqs which have been reported for
3.9-rc1. This regression has been introduced by switching to
irq-driven dp aux transactions with
commit 9ee32fea5f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Dec 1 13:53:48 2012 +0100
drm/i915: irq-drive the dp aux communication
References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18588.html
References: https://lkml.org/lkml/2013/2/26/769
Tested-by: Imre Deak <imre.deak@intel.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Pimp commit message with references for the dp aux irq
timeout regression this fixes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need it to restore the ilk rc6 context, since the gpu wait no
requires interrupts. But in general having interrupts around should
help in code sanity, since more and more stuff is interrupt driven.
This regression has been introduced in
commit 3e9605018a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 27 16:22:54 2012 +0000
drm/i915: Rearrange code to only have a single method for waiting upon the ring
Like in the driver load code we need to make sure that hotplug
interrupts don't cause havoc with our modeset state, hence block them
with the existing infrastructure. Again we ignore races where we might
loose hotplug interrupts ...
Note that the driver load part of the regression has already been
fixed in
commit 52d7ecedac
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Dec 1 21:03:22 2012 +0100
drm/i915: reorder setup sequence to have irqs for output setup
v2: Add a note to the commit message about which patch fixed the
driver load part of the regression. Stable kernels need to backport
both patches.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691
Cc: stable@vger.kernel.org (for 3.8 only, plese backport
52d7ecedac first)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com>
Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This increases GEN6_RC6p_THRESHOLD from 100000 to 150000. For some
reason this avoids the gen6_gt_check_fifodbg.isra warnings and
associated GPU lockups, which makes my ivy bridge machine stable.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On G45 some low res modes (800x600 and 1024x768) produce a blank
screen when the display plane is enabled with with cursor plane
off.
Experiments showed that this issue occurred when the following
conditions were met:
a. a previous mode had the cursor plane enabled (Xserver).
b. this mode or the previous one was using self refresh. (Thus
the problem was only seen with low res modes).
The screens lit up as soon as the cursor plane got enabled.
Therefore the blank screen occurred only in console mode, not
when running an Xserver.
It also seemed to be necessary to disable self refresh while briefly
enabling the cursor plane.
Signed-off-by: Egbert Eich <eich@suse.com>
Bugzilla: https://bugs.freedesktop.org/attachment.cgi?bugid=61457
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: drop spurious whitespace change.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The second digit was off by one, which meant we accidentally treated
GT(n) as GT(n-1). This also meant no support for GT1 at all.
Cc: stable@kernel.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Restore crtc->fb to the old framebuffer if queue_flip fails.
While at it, kill the pointless intel_fb temp variable.
v2: Update crtc->fb before queue_flip and restore it back
after a failure.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So use msecs_to_jiffies(10) to make the timeout the same as in the
"!has_aux_irq" case.
This patch was initially written by Daniel Vetter and posted on
pastebin a few weeks ago. I'm just bringing it to the mailing list.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Need to initialize the variable wait to false.
Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts
commit 8ec22b214d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri May 11 18:01:34 2012 +0100
drm/i915/hdmi: Query the live connector status bit for G4x
and
commit b0ea7d37a8
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Thu Dec 13 16:09:00 2012 +0000
drm/i915/hdmi: Read the HPD status before trying to read the EDID
They reliably cause HDMI to not be detected on some systems (like my
ivb or the bug reporters gm45). To fix up the very slow unplug issues
we might want to fire up a 2nd detect cycle a few hundred ms after
each hotplug. But for now at least make displays work again.
I somewhat suspect that this is confined to HDMI connectors, since all
the machines I have with DP+ outputs work correctly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52361
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org.kernel.org # for 8ec22b21
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We trim the fb to fit the CRTC by computing the offset of that CRTC to
its nearest tile_row origin. This allows us to use framebuffers that are
larger than the CRTC limits without additional work.
However, we failed to compute the offset for a linear framebuffer
correctly as we treated its x-advance in whole tiles (instead of the
linear increment expected), leaving the CRTC misaligned with its
contents.
Fixes regression from commit c2c7513124
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 5 12:17:30 2012 +0200
drm/i915: adjust framebuffer base address on gen4+
v2: Adjust relative x-coordinate after linear alignment (vsyrjala)
v3: Repaint with pokadots (vsyrjala)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61152
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already have the quirk entry for the mobile platform, but also
reports on some desktop versions. So be paranoid and set it
everywhere.
References: http://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg33138.html
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Sankaran, Rajesh" <rajesh.sankaran@intel.com>
Reported-and-tested-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Whilst IOMMU is enabled for the Intel GPU on Ironlake, it appears that
using WC writes to update the PTE on the GPU fails miserably. The
result looks like the majority of the writes do not land leading to
lots of screen corruption and a hard system hang.
v2: s/</<=/ to preserve the current exclusion of Sandybridge
Reported-by: Nathan Myers <ncm@cantrip.org>
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Nathan Myers <ncm@cantrip.org>
[danvet: Remove cc: stable and add tested-by.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HSW no longer has the PIPECONF bit for limited range RGB output.
Instead the pipe CSC unit must be used to perform that task.
The CSC pre offset are set to 0, since the incoming data is full
[0:255] range RGB, the coefficients are programmed to compress the
data into [0:219] range, and then we use either the CSC_MODE black
screen offset bit, or the CSC post offsets to shift the data to
the correct [16:235] range.
Also have to change the confiuration of all planes so that the
data is sent through the pipe CSC unit. For simplicity send the
plane data through the pipe CSC unit always, and in case full
range output is requested, the pipe CSC unit is set up with an
identity transform to pass the plane data through unchanged.
I've been told by some hardware people that the use of the pipe
CSC unit shouldn't result in any measurable increase in power
consumption numbers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Print out the HW context object information per ring. Even though the
existing code only utilizes the render ring, it's simple enough to
support future expansion.
I had this in a patch somewhere in a rev of the original implementation,
but I must have lost it.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: s/context/default context/ bikeshed applied.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Yet another remnant ... this might explain why l3 remapping didn't
really work on HSW.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57441
Spotted-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The bit controlling whether PIPE_CONTROL DW/QW write targets
the global GTT or PPGTT moved moved from DW 2 bit 2 to
DW 1 bit 24 on IVB.
I verified on IVB that the fix is in fact effective. Without the fix
none of the scratch writes actually landed in the pipe control page.
With the fix the writes show up correctly.
v2: move PIPE_CONTROL_GLOBAL_GTT_IVB setup to where other flags are set
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Intel PRM says the M1 and M2 divisors must be in the range of 10-20 and 5-9.
Since we do all calculations based on them being register values (which are
subtracted by 2) we need to specify them accordingly.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Intel PRM says the M1 and M2 divisors must be in the range of 10-20 and 5-9.
Since we do all calculations based on them being register values (which are
subtracted by 2) we need to specify them accordingly.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Similarly to:
commit 6a0d1df3d3a0d2370541164eb0595fe35dcd6de3
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Tue Dec 11 15:18:28 2012 +0000
drm/i915: Preserve the FDI line reversal override bit on CPT
DDI port support lane reversal to easy the PCB layouting work. Let's
preserve the bit configured by the BIOS (until we find how to correctly
retrieve the information from the VBT, but this does sound more fragile
then just relying on the BIOS that has, hopefully, been validated
already.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The FDI link has supported link reversal to make the PCB layout
engineer's life easier for quite a while and we have always presered
this bit as we programmed FDI_RX_CTL with a read/modify/write sequence.
We're trying to take a bit more control over what the BIOS leaves in
various register and with the introduction of DDI, started to program
FDI_RX_CTL fully.
There's a fused bit to indicate DMI link reversal and FDI defaults to
mirroring that configuration. We have a bit to override that behaviour
that we need to preserve from the BIOS.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Amending
commit 4518f611ba
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 23 16:16:35 2013 +0100
drm/i915: dump UTS_RELEASE into the error_state
CC: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Support for real RGB332 is a rarity, most hardware only really support
C8. So use C8 instead of RGB332 when determining the format based on
depth/bpp.
This fixes 8bpp fbcon on i915, since i915 will only accept C8 and not
RGB332.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59572
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Tested-by: mlsemon35@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Set depth/bits_per_pixel to 8 for C8 format.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As explained by Chris Wilson gem objects in stolen memory are always
coherent with the GPU so we don't need to ever flush the CPU caches for
these.
This fixes a breakage - at least with the compact sg patches applied -
during the resume/restore gtt mappings path, when we tried to clflush an
FB object in stolen memory, but since stolen objects don't have backing
pages we passed an invalid page pointer to drm_clflush_page().
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If a GPU reset occurs while a page flip has been submitted to the ring,
the flip will never complete once the ring has been reset.
The GPU reset can be detected by sampling the reset_counter before the
flip is submitted, and then while waiting for the flip, the sampled
counter is compared with the current reset_counter value.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Move the reset_counter assignment to an earlier place in
common code as discussed on the mailing list.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60140
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The pending flip mask no longer set anywhere, so trying to wait for
while it's non-zero is a no-op. Remove it completely.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has been lost in the locking rework for intel_alloc_context_page:
commit 2c34b850ee
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Sat Mar 19 18:14:26 2011 -0700
drm/i915: fix ilk rc6 teardown locking
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already print the HWS addresses during init, so do the same for the
pipe control page. Reduces guesswork when looking at hex addresses
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the previous patch "drm/i915: disable shared panel fitter for
pipe" we now disable the panel fitter at the right spot in the modeset
sequence in the crtc functions on all platforms. Hence the disabling
in intel_disable_lvds is no longer required and potentially harmful
(since the plane is still enabled at this point).
Similarly on the enabling side we enable the panel fitter in the lvds
callback only once the plane is enabled. Which is too late. Hence move
this into a new intel_pre_enable_lvds callback.
Finally we can ditch lvds_encoder->pfit_dirty - this was required to
work around the crtc helper semantics, but with the new i915 modeset
infrastructure we should enable/disable the pfit only when enabling or
disabling the entire output pipeline. So separate state tracking for
the pfit is no longer required.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Bikeshed the commit message a bit to stress that now we
enable/disable the pfit on i9xx platforms at the right point of time
compared to the old code.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If encoder is switched off by BIOS, but the panel fitter is left on,
we never try to turn off the panel fitter and leave it still attached
to the pipe - which can cause blurry output elsewhere.
Based on work by Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58867
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: Andreas Sturmlechner <andreas.sturmlechner@gmail.com>
[danvet: Remove the redundant HAS_PCH_SPLIT check and add a tiny
comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some early bios versions seem to ship with the wrong tuning values for
the MCH, possible resulting in pipe underruns under load. Especially
on DP outputs this can lead to black screen, since DP really doesn't
like an occasional whack from an underrun.
Unfortunately the registers seem to be locked after boot, so the only
thing we can do is politely point out issues and suggest a BIOS
upgrade.
Arthur Runyan pointed us at this issue while discussion DP bugs - thus
far no confirmation from a bug report yet that it helps. But at least
some of my machines here have wrong values, so this might be useful in
understanding bug reports.
v2: After a bit more discussion with Art and Ben we've decided to only
the check the watermark values, since the OREF ones could be be a
notch more aggressive on certain machines.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Runyan, Arthur J <arthur.j.runyan@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's not that the assertion is incorrect, but rather that we can call
do_destroy early in loading, and we will falsely BUG().
Since contexts have been in for a while now, and in the internal APIs
are pretty stable, it should be fairly safe to remove this.
v2: Remove unused dev_priv, and dev
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ring initialization will differ a bit in upcoming generations, and
this split will prepare the code for what's needed.
This patch also fixes a bug introduced in:
commit 9943393195
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Jan 22 14:12:17 2013 +0200
drm/i915: use gem_set_seqno() on hardware init
After doing the extraction, the bad error handling became obvious. I
acknowledge that this should be two patches, but it's a pretty
small/trivial patch. If requested, I can certainly do the fix as a
distinct patch.
v2: Should be cleanup blt, not init blt on failure (Chris)
v3: Forgot to git add on v2
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When I refactored the code initially, I forgot that gen2 uses a
different bar for the CPU mappable aperture. The agp-less code knows
nothing of generations less than 5, so we have to expand the gtt_probe
function to include the mappable base and end.
It was originally broken by me:
commit baa09f5fd8
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Thu Jan 24 13:49:57 2013 -0800
drm/i915: Add probe and remove to the gtt ops
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So we can remove duplicated code. Note that this function is used not
only on IBX, but also CPT and LPT.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Also bikeshed s/ironlake_enable_pch_hotplug/ibx_enable_hotplug
to keep consistent with our ibx for pch naming scheme.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have more than one sprite, so a boolean simply won't cut it.
Turn sprite_scaling_enabled into a bitmask and track the state
of sprite scaler for each sprite independently.
Also don't re-enable LP watermarks until the sprite registers
have actually been written, and thus sprite scaling has really
been disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
They're physically the same pins and also the same bits, duplicating
only confuses the reader. This also makes it a bit obvious that we
have quite some code duplication going on here. Squashing that is for
a larger rework in our hpd handling though.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was a rebase error from when the patches originally landed. Since
the context size is unsigned, there is also no use in checking if it's
less than 0.
The existing code is not really wrong, but it's not simple as it should
be.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
770c12312a is the first bad commit
commit 770c12312a
Author: Takashi Iwai <tiwai@suse.de>
Date: Sat Aug 11 08:56:42 2012 +0200
drm/i915: Fix blank panel at reopening lid
changed the register write sequence for restoring the backlight, which
helped prevent non-working backlights on some machines. Turns out that
the original sequence was the right thing to do for a different set of
machines. Worse, setting the backlight level _after_ enabling it seems
to reset it somehow. So we need to make that one conditional upon the
backlight having been reset to zero, and add the old one back.
Cargo-culting at it's best, but it seems to work.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915 driver needs to do modeset when
1. system resumes from sleep
2. lid is opened
In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
thus it is the i915_resume code does the modeset rather than intel_lid_notify().
But in PM_SUSPEND_FREEZE state, this will be broken because
system is still responsive to the lid events.
1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
2. When we reopen the lid, intel_lid_notify() will do a modeset,
before the system is resumed.
here is the error log,
[92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
[92146.548076] Hardware name: VGN-Z540N
[92146.548078] pipe_off wait timed out
[92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
[92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G W 3.8.0-rc3-s0i3-v3-test+ #9
[92146.548175] Call Trace:
[92146.548189] [<c10378e2>] warn_slowpath_common+0x72/0xa0
[92146.548227] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548263] [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548270] [<c10379b3>] warn_slowpath_fmt+0x33/0x40
[92146.548307] [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548344] [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
[92146.548380] [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
[92146.548417] [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
[92146.548456] [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
[92146.548493] [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
[92146.548535] [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
[92146.548543] [<c15610d3>] notifier_call_chain+0x43/0x60
[92146.548550] [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
[92146.548556] [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
[92146.548563] [<c131a684>] acpi_lid_send_state+0x78/0xa4
[92146.548569] [<c131aa9e>] acpi_button_notify+0x3b/0xf1
[92146.548577] [<c12df56a>] ? acpi_os_execute+0x17/0x19
[92146.548582] [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
[92146.548589] [<c12e2b82>] acpi_device_notify+0x16/0x18
[92146.548595] [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
[92146.548600] [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
[92146.548607] [<c1051208>] process_one_work+0x128/0x3f0
[92146.548613] [<c1564f73>] ? common_interrupt+0x33/0x38
[92146.548618] [<c104f8c0>] ? wake_up_worker+0x30/0x30
[92146.548624] [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
[92146.548629] [<c10524f9>] worker_thread+0x119/0x3b0
[92146.548634] [<c10523e0>] ? manage_workers+0x240/0x240
[92146.548640] [<c1056e84>] kthread+0x94/0xa0
[92146.548647] [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
[92146.548652] [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
[92146.548658] [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0
three different modeset flags are introduced in this patch
MODESET_ON_LID_OPEN: do modeset on next lid open event
MODESET_DONE: modeset already done
MODESET_SUSPENDED: suspended, only do modeset when system is resumed
In this way,
1. when lid is closed, MODESET_ON_LID_OPEN is set so that
we'll do modeset on next lid open event.
2. when lid is opened, MODESET_DONE is set
so that duplicate lid open events will be ignored.
3. when system suspends, MODESET_SUSPENDED is set.
In this case, we will not do modeset on any lid events.
Plus, locking mechanism is also introduced to avoid racing.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The RC6 VIDS has a linear ramp starting at 250mv, which means any values
below 250 are invalid. The old buggy macros tried to adjust for this to
be more flexible, but there is no need. As Dan pointed out the ENCODE
only ever has one value. The only invalid value for decode is an input
of 0 which means something is really wonky, and the cases where DECODE
are used either don't matter (debug values), or would be implicitly
correct (the check for less than 450).
This patch makes simpler, easier to read macros which are actually
correct. Maybe this patch can actually fix some bugs now.
Thanks to Dan for catching this. /me hides
Cc: stable@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts commit 6f33814bd4.
The quirk cause a regression, and it looks like the original bug was
simply a lack of FIFO bandwidth on the i915G of the reporter. Which
should eventually be fixed as soon as we get around to implemented
DSPARB FIFO reassignment on gen 3.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TTM reservations changes, preparing for new reservation mutex system.
* 'for-airlied' of git://people.freedesktop.org/~mlankhorst/linux:
drm/ttm: unexport ttm_bo_wait_unreserved
drm/nouveau: use ttm_bo_reserve_slowpath in validate_init, v2
drm/ttm: use ttm_bo_reserve_slowpath_nolru in ttm_eu_reserve_buffers, v2
drm/ttm: add ttm_bo_reserve_slowpath
drm/ttm: cleanup ttm_eu_reserve_buffers handling
drm/ttm: remove lru_lock around ttm_bo_reserve
drm/nouveau: increase reservation sequence every retry
drm/vmwgfx: always use ttm_bo_is_reserved
It is a bit more precise to compute the total number of pixels first and
then divide, rather than multiplying the line pixel count by the
already-rounded line duration.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use PCI Express Capability access functions to simplify this code a bit.
For non-PCIe devices or pre-PCIe 3.0 devices that don't implement the Link
Capabilities 2 register, pcie_capability_read_dword() reads a zero.
Since we're only testing whether the bits we care about are set, there's no
need to mask out the other bits we *don't* care about.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For devices that conform to PCIe r3.0 and have a Link Capabilities 2
register, we test and report every bit in the Supported Link Speeds Vector
field. For a device that supports both 2.5GT/s and 5.0GT/s, we set both
DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in the returned mask.
For pre-r3.0 devices, the Link Capabilities 0010b encoding
(PCI_EXP_LNKCAP_SLS_5_0GB) means that both 5.0GT/s and 2.5GT/s are
supported, so set both DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in this
case as well.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use the standard #defines rather than bare numbers for the PCIe Link
Capabilities speed bits.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
