Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels
to the simple-panel driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix.de: fix typo in compatible dt-binding]
[m.felsch@pengutronix.de: add property bindings]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523092504.5142-3-m.felsch@pengutronix.de
The Emerging Display Technology ETM0700G0EDH6 is the
uses the same panel as the ETM0700G0BDH6. It differs
in the hardware design for the backlight and the
touchscreen i2c interface. As the new display type has
different requirements for drive-strengths on the i2c-bus,
add an additional compatible to allow the handling of it or warn
about incompatible cpu and display combinations.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-3-jan.tuerk@emtrion.com
The Emerging Display Technology ETM0700G0BDH6 is exactly
the same display as the ETM0700G0DH6, exept the pixelclock
polarity. Therefore re-use the ETM0700G0DH6 modes. It is
used by default on emtrion Avari based development kits.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-2-jan.tuerk@emtrion.com
This adds support for the Rocktech Display Ltd. RK070ER9427
800(RGB)x480 TFT LCD panel, which can be supported by the
simple panel driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607134648.2902-1-jagan@amarulasolutions.com
Remove drm_fb_cma_fbdev_init_with_funcs(), its only user tinydrm has
moved to drm_fbdev_generic_setup().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-9-noralf@tronnes.org
This switches the CMA helper drivers that use its fbdev emulation over
to the generic fbdev emulation. It's the first phase of using generic
fbdev. A later phase will use DRM client callbacks for the
lastclose/hotplug/remove callbacks.
There are currently 2 fbdev init/fini functions:
- drm_fb_cma_fbdev_init/drm_fb_cma_fbdev_fini
- drm_fbdev_cma_init/drm_fbdev_cma_fini
This is because the work on generic fbdev came up during a fbdev
refactoring and thus wasn't completed. No point in completing that
refactoring when drivers will soon move to drm_fb_helper_generic_probe().
tinydrm uses drm_fb_cma_fbdev_init_with_funcs().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-5-noralf@tronnes.org
This is the first step in getting generic fbdev emulation.
A drm_fb_helper_funcs.fb_probe function is added which uses the
DRM client API to get a framebuffer backed by a dumb buffer.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-3-noralf@tronnes.org
This the beginning of an API for in-kernel clients.
First out is a way to get a framebuffer backed by a dumb buffer.
Only GEM drivers are supported.
The original idea of using an exported dma-buf was dropped because it
also creates an anonomous file descriptor which doesn't work when the
buffer is created from a kernel thread. The easy way out is to use
drm_driver.gem_prime_vmap to get the virtual address, which requires a
GEM object. This excludes the vmwgfx driver which is the only non-GEM
driver apart from the legacy ones. A solution for vmwgfx will have to be
worked out later if it wants to support the client API which it probably
will when we have a bootsplash client.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org
Mimic what is done in drm_atomic_commit_tail() and call
drm_atomic_helper_fake_vblank() so that VBLANK events are faked
when the drm_crtc_state.no_vblank is true. Will be needed when we'll
add support for the transposer block.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-8-boris.brezillon@bootlin.com
In some cases CRTCs are active but are not able to generating events, at
least not at every frame at it's expected to.
This is typically the case when the CRTC is feeding a writeback connector
that has no job queued. In this situation the CRTC is usually stopped
until a new job is queued, and this can lead to timeouts when part of
the pipeline is updated but no new jobs are queued to the active
writeback connector.
In order to solve that, we add a ->no_vblank flag to drm_crtc_state
and ask the CRTC drivers to set it to true when they know they're not
able to generate VBLANK events. The core drm_atomic_helper_fake_vblank()
helper can then be used to fake VBLANKs at commit time.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-6-boris.brezillon@bootlin.com
drm_atomic_helper_wait_for_vblanks() assumes the CRTC will continuously
generate VBLANK events and the vblank counter will keep increasing.
While this work for a regular pipeline, it doesn't when you have the
CRTC is feeding the transposer block, because this block works in
oneshot mode, and, by the time we reach
drm_atomic_helper_wait_for_vblanks() the only VBLANK event might have
already been sent and the VBLANK counter will stay unchanged, thus
triggering a timeout.
Luckily, we can replace the drm_atomic_helper_wait_for_vblanks() call
by drm_atomic_helper_wait_for_flip_done() because the only thing we
want to check when calling drm_atomic_helper_wait_for_vblanks() from
vc4_atomic_complete_commit() is that new FBs are in use and the old
ones can be safely released.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-5-boris.brezillon@bootlin.com
Not all writeback connector implementations might want to commit things
from the connector driver. Some, like the malidp driver, commit things
from their main commit_tail() function, and would rather not have to
implement a dummy hook for drm_connector_helper_funcs.atomic_commit().
Make this function optional and reflect this fact in the doc.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-4-boris.brezillon@bootlin.com
Use container_of() instead of type casting so that it keeps working
even if base is moved inside the drm_writeback_connector struct.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-2-boris.brezillon@bootlin.com
Pull in the malidp writeback implementation for further work on writeback in drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reset must be properly assert before deassert.
This is important if there is an early boot splash screen
before the kernel start up.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1530271355-5608-1-git-send-email-yannick.fertre@st.com
Filter the requested mode pixel clock frequency according
to the pad maximum supported frequency.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1530271342-5532-1-git-send-email-yannick.fertre@st.com
"mali-dp driver changes for drm-next, includes the driver implementation
for writeback, improvements for power management handling in the driver
and a debugfs entry for reporting possible internal errors. Please pull
at your earliest convenience.
Boris Brezillon is also interested in this pull as he is going to change
slightly the parameter for the writeback connector's atomic_commit() and
he needs to fix the mali-dp driver in his series."
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking
it through the DRM tree:
This is a small fallout from a work to allow batching WW mutex locks and
unlocks.
Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but
the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to
"Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested
here is to implement also the "Wound-Wait" algorithm as a per-WW-class
choice, as it has advantages in some cases. See for example
http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html
Now Wound-Wait is a preemptive algorithm, and the preemption is implemented
using a lazy scheme: If a wounded transaction is about to go to sleep on
a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock
prevention. Since with WW mutexes we also require the aborted transaction to
sleep waiting to lock the WW mutex it was aborted on, this choice also provides
a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first
WW mutex lock after the transaction was wounded whether the WW mutex was
contended or not, the transaction might frequently be restarted without a wait,
which is far from optimal. Note also that with the lazy preemption scheme,
contrary to Wait-Die there will be no rollbacks on lock contention of locks
held by a transaction that has completed its locking sequence.
The modeset locks are then changed from Wait-Die to Wound-Wait since the
typical locking pattern of those locks very well matches the criterion for
a substantial reduction in the number of rollbacks. For reservation objects,
the benefit is more unclear at this point and they remain using Wait-Die.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703105339.4461-1-thellstrom@vmware.com
Using += to set the bits in a mask looks funny. It works in this case
because we never set the same bit twice. But let's switch to |= to
make this look more regular.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615170734.2774-1-ville.syrjala@linux.intel.com
Reviewed-by: Eric Anholt <eric@anholt.net>
This was a failure of "git add" on my part -- we already referenced
the doc from drivers.rst.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703170515.6298-3-eric@anholt.net
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
The dma-fence core as of commit 418cc6ca06 ("dma-fence: Make ->wait
callback optional") provides appropriate defaults for these methods.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703170515.6298-2-eric@anholt.net
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
GTF-GLES2.gtf.GL.acos.acos_float_vert_xvary submits jobs that take 4
seconds at maximum resolution, but we still want to reset quickly if a
job is really hung. Sample the CL's current address and the return
address (since we call into tile lists repeatedly) and if either has
changed then assume we've made progress.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703170515.6298-1-eric@anholt.net
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
malidp_pm_suspend_late checks if the runtime status is not suspended
and if so, invokes malidp_runtime_pm_suspend which disables the
display engine/core interrupts and the clocks. It sets the runtime status
as suspended.
The difference between suspend() and suspend_late() is as follows:-
1. suspend() makes the device quiescent. In our case, we invoke the DRM
helper which disables the CRTC. This would have invoked runtime pm
suspend but the system suspend process disables runtime pm.
2. suspend_late() It continues the suspend operations of the drm device
which was started by suspend(). In our case, it performs the same functionality
as runtime_suspend().
The complimentary functions are resume() and resume_early(). In the case of
resume_early(), we invoke malidp_runtime_pm_resume() which enables the clocks
and the interrupts. It sets the runtime status as active. If the device was
in runtime suspend mode before system suspend was called, pm_runtime_work()
will put the device back in runtime suspended mode( after the complete system
has been resumed).
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
One needs to store the value of the OUTPUT_DEPTH that one has parsed from
device tree, so that it can be restored on system resume. This value is
set in the modeset function as this gets reset when the system suspends.
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Display and scaling engine interrupts need to be disabled when the
runtime pm invokes malidp_runtime_pm_suspend(). Conversely, they
need to be enabled in malidp_runtime_pm_resume().
This patch depends on:
https://lkml.org/lkml/2017/5/15/695
Reported-by: Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com>
Signed-off-by: Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Malidp uses two interrupts ie 1. se_irq - used for memory writeback.
and 2. de_irq - used for display output.
Extract the hardware initialization part from malidp interrupt registration
ie (malidp_de_irq_init()/ malidp_se_irq_init()) into a separate function
(ie malidp_de_irq_hw_init()/malidp_se_irq_hw_init())
which will be later invoked from runtime_pm_resume function when it needs
to re-enable the interrupts.
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Malidp uses two interrupts ie 1. se_irq - used for memory writeback.
and 2. de_irq - used for display output.
'struct drm_device' is being replaced with 'struct malidp_hw_device'
as the function argument. The reason being the dependency of
malidp_de_irq_fini on 'struct drm_device' needs to be removed so as to
enable it to call from functions which receives 'struct malidp_hw_device'
as argument. Furthermore, there is no way to retrieve 'struct drm_device'
from 'struct malidp_hw_device'.
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Status register contains a lot of bits for reporting internal errors
inside Mali DP. Currently, we just silently ignore all of the errors,
that doesn't help when we are investigating different bugs, especially
on the FPGA models which have a lot of constraints, so we could easily
end up in AXI or underrun errors.
Add a new file called debug that contains an aggregate of the
errors reported by the Mali DP hardware.
E.g:
[root@alarm ~]# cat /sys/kernel/debug/dri/1/debug
[DE] num_errors : 167
[DE] last_error_status : 0x00000001
[DE] last_error_vblank : 385
[SE] num_errors : 3
[SE] last_error_status : 0x00e23001
[SE] last_error_vblank : 201
Changes since v2:
- Add lock to protect the errors stats.
- Add possibility to reset the error stats by writing anything to the
debug file.
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Mali DP500 operates in continuous writeback mode (writes frame content
until stopped) and it needs special handling in order to behave like
a one-shot writeback engine. The original state machine added for DP500
was a bit fragile, as it did not handle correctly cases where a new
atomic commit was in progress when the SE IRQ happens and it would
commit some partial updates.
Improve the handling by adding a parameter to the set_config_valid()
function to clear the config valid bit in hardware before starting a
new commit and by introducing a MW_RESTART state in the writeback
state machine to cater for the case where a new writeback commit
gets submitted while the last one is still being active.
Reported-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Mali-DP has a memory writeback engine which can be used to write the
composition result to a memory buffer. Expose this functionality as a
DRM writeback connector on supported hardware.
Changes since v1:
Daniel Vetter:
- Don't require a modeset when writeback routing changes
- Make writeback connector always disconnected
Changes since v2:
- Rebase onto new drm_writeback_connector
- Add reset callback, allocating subclassed state
Daniel Vetter:
- Squash out-fence support into this commit
Gustavo Padovan:
- Don't signal fence directly from driver (and drop malidp_mw_job)
Changes since v3:
- Modifications to fit with Mali-DP commit tail changes
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Annotate the pixel format matrix for DP500 with the memory-write flag
for formats that are supported by the SE memwrite engine.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Mali DP500 behaves differently from the rest of the Mali DP IP,
in that it does not have a one-shot mode and keeps writing the
content of the current frame to the provided memory area until
stopped. As a way of emulating the one-shot behaviour, we are
going to use the CVAL interrupt that is being raised at the
start of each frame, during prefetch phase, to act as End-of-Write
signal, but with a twist: we are going to disable the memory
write engine right after we're notified that it has been enabled,
using the knowledge that the bit controlling the enabling will
only be acted upon on the next vblank/prefetch.
CVAL interrupt will fire durint the next prefetch phase every time
the global CVAL bit gets set, so we need a state byte to track
the memory write enabling. We also need to pay attention during the
disabling of the memory write engine as that requires the CVAL bit
to be set in the control register, but we don't want to do that
during an atomic commit, as it will write into the hardware a partial
state.
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
