We need to flush the write cache unconditionally in ->fsync, otherwise
writes into already allocated blocks can get lost. Writes into fully
allocated files are very common when using disk images for
virtualization, and without this fix can easily lose data after
an fdatasync, which is the typical implementation for a cache flush on
the virtual drive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There's no real cost for the journal checksum feature, and we should
make sure it is enabled all the time.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unlike on some other architectures ino_t is an unsigned int on s390.
So add an explicit cast to avoid lots of compile warnings:
In file included from include/trace/ftrace.h:285,
from include/trace/define_trace.h:61,
from include/trace/events/ext4.h:711,
from fs/ext4/super.c:50:
include/trace/events/ext4.h: In function 'ftrace_raw_output_ext4_free_inode':
include/trace/events/ext4.h:12: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new tracepoint which shows the pages that will be written using
write_cache_pages() by ext4_da_writepages().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
To solve a lock inversion problem, we implement part of the
range_cyclic algorithm in ext4_da_writepages(). (See commit 2acf2c26
for more details.)
As part of that change wbc->range_start was modified by ext4's
writepages function, which causes its callers to get confused since
they aren't expecting the filesystem to modify it. The simplest fix
is to save and restore wbc->range_start in ext4_da_writepages.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_link we need to check using EXT4_LINK_MAX, and not
EXT4_DIR_LINK_MAX(), since ext4_link() is creating hard links of
regular files, and not directories.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use EXT4_DIR_LINK_MAX so that rename() can move a directory into new
parent directory without running into the EXT4_LINK_MAX limit.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The extents sanity-checking code depends on the ext4_ext_space_*()
functions returning the maximum alloable size for eh_max; however,
when the debugging #ifdef AGGRESSIVE_TEST is enabled to test the
extent tree handling code, this prevents a normally created ext4
filesystem from being mounted with the errors:
Aug 26 15:43:50 bsd086 kernel: [ 96.070277] EXT4-fs error (device sda8): ext4_ext_check_inode: bad header/extent in inode #8: too large eh_max - magic f30a, entries 1, max 4(3), depth 0(0)
Aug 26 15:43:50 bsd086 kernel: [ 96.070526] EXT4-fs (sda8): no journal found
Bug reported by Akira Fujita.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
unsigned short is potentially too small to track blocks within
a group; today it is safe due to restrictions in e2fsprogs but
we have _lo / _hi bits for group blocks with the intent to go
up to 32 bits, so clean this up now.
There are many more places where we use unsigned/int/unsigned int
to contain a group block but this should at least fix all the
short types.
I added a few comments to the struct ext4_group_info definition
as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Precursor to changing some types; to keep things in sync, it
seems better to allocate/memset based on the size of the
variables we are using rather than on some disconnected
basic type like "unsigned short"
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
A user reported that although his root ext4 filesystem was mounting
fine, other filesystems would not mount, with the:
"Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF"
error on his 32-bit box built without CONFIG_LBDAF. This is because
the test at mount time for this situation was not being re-checked
on remount, and the normal boot process makes an ro->rw transition,
so this was being missed.
Refactor to make a common helper function to test the filesystem
features against the type of mount request (RO vs. RW) so that we
stay consistent.
Addresses Red-Hat-Bugzilla: #517650
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While reading through some of the mballoc code it seems that a couple
spots in the size normalization function could be streamlined.
The test for non-overlapping PAs can be or'd for the start & end
conditions, and the tests for adjacent PAs can be else-if'd -
it's essentially independently testing:
if (A + B <= C)
...
if (A > C)
...
These cannot both be true so it seems like the else-if might
be slightly more efficient and/or informative.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_mb_update_group_info is only called in one place, and it's
extremely simple. There's no reason to have it in a separate function
in a separate file as far as I can tell, it just obfuscates what's
really going on.
Perhaps it was intended to keep the grp->bb_* manipulation local to
mballoc.c but we're already accessing other grp-> fields in balloc.c
directly so this seems ok.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4 will happily mount a > 16T filesystem on a 32-bit box, but
this is not safe; writes to the block device will wrap past 16T
and the page cache can't index past 16T (232 index * 4k pages).
Adding another test to the existing "too many sectors" test
should do the trick.
Add a comment, a relevant return value, and fix the reference
to the CONFIG_LBD(AF) option as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes sparse noise:
error: dubious one-bit signed bitfield
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@ucw.cz>
During truncate we are sometimes forced to start a new transaction as
the amount of blocks to be journaled is both quite large and hard to
predict. So far we restarted a transaction while holding i_data_sem
and that violates lock ordering because i_data_sem ranks below a
transaction start (and it can lead to a real deadlock with
ext4_get_blocks() mapping blocks in some page while having a
transaction open).
We fix the problem by dropping the i_data_sem before restarting the
transaction and acquire it afterwards. It's slightly subtle that this
works:
1) By the time ext4_truncate() is called, all the page cache for the
truncated part of the file is dropped so get_block() should not be
called on it (we only have to invalidate extent cache after we
reacquire i_data_sem because some extent from not-truncated part could
extend also into the part we are going to truncate).
2) Writes, migrate or defrag hold i_mutex so they are stopped for all
the time of the truncate.
This bug has been found and analyzed by Theodore Tso <tytso@mit.edu>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
lockdep annotation for a transaction start has been at the end of
jbd2_journal_start(). But a transaction is also started from
jbd2_journal_restart(). Move the lockdep annotation to start_this_handle()
which covers both cases.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_ext_show_leaf() will display the leaf extents when extent
debugging is enabled.
Printing out the unwritten bit is useful for debugging unwritten
extent, allow us to see the unwritten extents vs written extents,
after the unwritten extents are splitted or converted.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
When EXT_DEBUG is enabled I received the following compile warning on
PPC64:
CC [M] fs/ext4/inode.o
CC [M] fs/ext4/extents.o
fs/ext4/extents.c: In function ‘ext4_ext_rm_leaf’:
fs/ext4/extents.c:2097: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘ext4_lblk_t’
fs/ext4/extents.c: In function ‘ext4_ext_get_blocks’:
fs/ext4/extents.c:2789: warning: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘long unsigned int’
fs/ext4/extents.c:2852: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘ext4_lblk_t’
fs/ext4/extents.c:2953: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘unsigned int’
CC [M] fs/ext4/migrate.o
The patch fixes compile warning.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Index: linux-2.6.31-rc4/fs/ext4/extents.c
===================================================================
Currently the group preallocation code tries to find a large (512)
free block from which to do per-cpu group allocation for small files.
The problem with this scheme is that it leaves the filesystem horribly
fragmented. In the worst case, if the filesystem is unmounted and
remounted (after a system shutdown, for example) we forget the fact
that wee were using a particular (now-partially filled) 512 block
extent. So the next time we try to allocate space for a small file,
we will find *another* completely free 512 block chunk to allocate
small files. Given that there are 32,768 blocks in a block group,
after 64 iterations of "mount, write one 4k file in a directory,
unmount", the block group will have 64 files, each separated by 511
blocks, and the block group will no longer have any free 512
completely free chunks of blocks for group preallocation space.
So if we try to allocate blocks for a file that has been closed, such
that we know the final size of the file, and the filesystem is not
busy, avoid using group preallocation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The logic around sbi->s_mb_last_group and sbi->s_mb_last_start was all
screwed up. These fields were getting unconditionally all the time,
set even when stream allocation had not taken place, and if they were
being used when the file was smaller than s_mb_stream_request, which
is when the allocation should _not_ be doing stream allocation.
Fix this by determining whether or not we stream allocation should
take place once, in ext4_mb_group_or_file(), and setting a flag which
gets used in ext4_mb_regular_allocator() and ext4_mb_use_best_found().
This simplifies the code and assures that we are consistently using
(or not using) the stream allocation logic.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
move_extent_par_page calls a_ops->write_begin() to increase journal
handler's reference count. However, if either mext_replace_branches()
or ext4_get_block fails, the increased reference count isn't
decreased. This will cause a later attempt to umount of the fs to hang
forever. The patch addresses the issue by calling ext4_journal_stop()
if page is not NULL (which means a_ops->write_end() isn't invoked).
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
fix jiffie rounding in jbd commit timer setup code. Rounding down
could cause the timer to be fired before the corresponding transaction
has expired. That transaction can stay not committed forever if no
new transaction is created or expicit sync/umount happens.
Signed-off-by: Alex Zhuravlev (Tomas) <alex.zhuravlev@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When compiling with EXT4FS_DEBUG on, gcc will complain with following warnings:
linux-2.6/fs/ext4/ialloc.c: In function ‘ext4_count_free_inodes’:
linux-2.6/fs/ext4/ialloc.c:1192: warning: format ‘%lu’ expects type
‘long unsigned int’, but argument 2 has type ‘ext4_group_t’
So add a type cast to suppress it.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When MB_DEBUG is enabled, we get some compile warnings because
ext4_group_t is unsigned int. This patch fixes them.
Signed-off-by Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After the patch I posted last week regarding buffer head ref leaks in
no-journal mode, I looked at all the code that uses buffer heads and
searched for more potential leaks.
The patch below fixes the issues I found; these can occur even when a
journal is present.
The change to inode.c fixes a double release if
ext4_journal_get_create_access() fails.
The changes to namei.c are more complicated. add_dirent_to_buf() will
release the input buffer head EXCEPT when it returns -ENOSPC. There are
some callers of this routine that don't always do the brelse() in the event
that -ENOSPC is returned. Unfortunately, to put this fix into ext4_add_entry()
required capturing the return value of make_indexed_dir() and
add_dirent_to_buf().
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Due to on disk corruption, it can happen that journal is too short. Fail
to load it in such case so that we don't oops somewhere later.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to check to make sure a journal is present before checking the
journal flags in ext4_decode_error().
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The allocation of the ext4_group_info array was moved to a new
function ext4_mb_add_group_info() in commit 5f21b0e6 so that online
resize would use a common (and correct) codepath. Unfortunately, the
call to the new ext4_mb_add_group_info() function was added without
removing the code which originally allocated the array. This caused a
memory leak each time an ext4 filesystem was mounted.
The fix is simple; remove the code that did the original allocation,
since it is no longer needed.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
debugfs: Modify default debugfs directory for debugging pktcdvd.
debugfs: Modified default dir of debugfs for debugging UHCI.
debugfs: Change debugfs directory of IWMC3200
debugfs: Change debuhgfs directory of trace-events-sample.h
debugfs: Fix mount directory of debugfs by default in events.txt
hpilo: add poll f_op
hpilo: add interrupt handler
hpilo: staging for interrupt handling
driver core: platform_device_add_data(): use kmemdup()
Driver core: Add support for compatibility classes
uio: add generic driver for PCI 2.3 devices
driver-core: move dma-coherent.c from kernel to driver/base
mem_class: fix bug
mem_class: use minor as index instead of searching the array
driver model: constify attribute groups
UIO: remove 'default n' from Kconfig
Driver core: Add accessor for device platform data
Driver core: move dev_get/set_drvdata to drivers/base/dd.c
Driver core: add new device to bus's list before probing
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pcmcia-2.6:
pcmcia: document return value of pcmcia_loop_config
pcmcia: dtl1_cs: fix pcmcia_loop_config logic
pcmcia: drop non-existant includes
pcmcia: disable prefetch/burst for OZ6933
pcmcia: fix incorrect argument order to list_add_tail()
pcmcia: drivers/pcmcia/pcmcia_resource.c: Remove unnecessary semicolons
pcmcia: Use phys_addr_t for physical addresses
pcmcia: drivers/pcmcia: Make static
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
PCI hotplug: clean up acpi_run_hpp()
PCI hotplug: acpiphp: use generic pci_configure_slot()
PCI hotplug: shpchp: use generic pci_configure_slot()
PCI hotplug: pciehp: use generic pci_configure_slot()
PCI hotplug: add pci_configure_slot()
PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
PCI: Clear saved_state after the state has been restored
PCI PM: Return error codes from pci_pm_resume()
PCI: use dev_printk in quirk messages
PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
PCI Hotplug: acpiphp: find bridges the easy way
PCI: pcie portdrv: remove unused variable
PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
ACPI PM: Replace wakeup.prepared with reference counter
PCI PM: Introduce device flag wakeup_prepared
PCI / ACPI PM: Rework some debug messages
PCI PM: Simplify PCI wake-up code
...
Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases. The
'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
* 'writeback' of git://git.kernel.dk/linux-2.6-block:
writeback: fix possible bdi writeback refcounting problem
writeback: Fix bdi use after free in wb_work_complete()
writeback: improve scalability of bdi writeback work queues
writeback: remove smp_mb(), it's not needed with list_add_tail_rcu()
writeback: use schedule_timeout_interruptible()
writeback: add comments to bdi_work structure
writeback: splice dirty inode entries to default bdi on bdi_destroy()
writeback: separate starting of sync vs opportunistic writeback
writeback: inline allocation failure handling in bdi_alloc_queue_work()
writeback: use RCU to protect bdi_list
writeback: only use bdi_writeback_all() for WB_SYNC_NONE writeout
fs: Assign bdi in super_block
writeback: make wb_writeback() take an argument structure
writeback: merely wakeup flusher thread if work allocation fails for WB_SYNC_NONE
writeback: get rid of wbc->for_writepages
fs: remove bdev->bd_inode_backing_dev_info
wb_clear_pending AFAIKS should not be called after the item has been
put on the list, except by the worker threads. It could lead to the
situation where the refcount is decremented below 0 and cause lots of
problems.
Presumably the !wb_has_dirty_io case is not a common one, so it can
be discovered when the thread wakes up to check?
Also add a comment in bdi_work_clear.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
By the time bdi_work_on_stack gets evaluated again in bdi_work_free, it
can already have been deallocated and used for something else in the
!on stack case, giving a false positive in this test and causing
corruption.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
If you're going to do an atomic RMW on each list entry, there's not much
point in all the RCU complexities of the list walking. This is only going
to help the multi-thread case I guess, but it doesn't hurt to do now.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We cannot safely ensure that the inodes are all gone at this point
in time, and we must not destroy this bdi with inodes having off it.
So just splice our entries to the default bdi since that one will
always persist.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
