Commit Graph

423 Commits

Author SHA1 Message Date
Richard Tresidder
a45d123887 iio: accell: mma8452: Reduce sleep time when data not ready
Modified the sleep method when data is not ready to allow for sampling > 50sps to work.

Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-12 12:12:13 +01:00
Greg Kroah-Hartman
6a8b25abf1 1st round of IIO new device support, features and cleanup for the 4.18 cycle
A nice mix this time of excellent cleanups (many to send drivers
 speeding toward staging graduations) and new drivers / device support.
 A good part of this is Brian Masney's never ending task on the tsl2x7x
 driver.  The end is in sight so hopefully we'll get that one out of
 staging very soon!
 
 New device support
 * AD5686
   - Support AD5685R (was wrongly present as AD5685)
   - Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel
     SPI DACs with various precisions.
   - Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R
     I2C DACs with various percisions and numbers of channels.
 * Analog front end rescale driver - New driver.
   - Support current sensing usings a shunt resistor.
   - Support simple voltage dividers.
   - support simple current sense amplifiers.
 * TI dac5571
   - New driver and device bindings supporting:
     dac5571, dac6571, dac7571, dac5574, dac6574, dac7574,
     dac5573, dac6573 and dac7573
 * Meson-adc
   - Support for Meson AXG with DT bindings.
 * mpu6050
   - Support the mpu9255 which only requires additional WHOAMI entry and
     compatible string.
 * st_lsm6dsx
   - Support for lsm330dlc combinded accelerometer and gyro sensors with
     DT bindings.
 * stm32_adc
   - Add support for STM32MP1 with bindings.
 
 Staging graduations
 * adis16201 after some excelent cleanup by Himanshu Jha.
 * adis16029 after some excelent cleanup by Shreeya Patel.
 
 New features:
 * ABI docs
   - Add core ABI docs for angle channels.
 * inv_mpu6050
   - Provide support for the full range of interrupts the device
     supports.
 * st_accel
   - Add SMO8840 ACPI ID seen in the wild on some Lenovo machines.
 * stx104
   - Provide a multiple gpio get function.
 
 Cleanups / Minor fixes
 * core
   - Use new nested structure support to improve kernel-doc.
 * ad2s1200
   - Use be16_to_cpup instead of opencoding.
 * ad5686
   - Indentation tidy up.
   - Switch to SPDX
   - Refactor to allow various numbers of channels.
   - Refactor to separate core and SPI specific support, prior to
     addition of i2c equivalent devices.
 * ad7606
   - Use drvdata directly from device rather than boucing via the
     platform_device structure.
 * ad7746
   - Replace opencoded byte swapped i2c calls with _swapped variants.
   - White space and line break readability improvements.
   - Reorder includes and variable declarations where appropriate.
 * ad7791
   - Changes to the AD ADC library used by this driver took in the
     sampling frequency.  This lead to be the wrong path being the one
     tied to the resulting attribute, so it didn't work, and a warning
     to be printed.
 * ad7780
   - Remove apparent support for sampling frequency control on devices
     that don't support changing the sampling attributes.
 * ade7854
   - Fix a read of the wrong number of bits.
   - Improve error handling on i2c read/write errors.
   - Rework i2c and spi code to reduce duplication.
 * adis16201 (staging)
   - Improve meaning inherent in some macro names by adding units etc
     where relevant.
   - Adjust comments to improve detail and drop the irrelevant.
   - Rename register address definitions definitions to add a _REG
     postfix, clearly separating them from field definitions. Reorganize
     the definitions to group register address and fields.
   - Use sign_extend32 rather than open coding.
   - Reverse Xmas tree ordering where appropriate and align function args.
   - Remove unused headers.
   - Use GENMASK where appropriate instead of open coding.
 * adis16209 (staging)
   - Indent field definitions to visually separate them from
     register address definitions.
   - Use reverse xmas tree ordering where appropriate.
   - Add some whitespace where it will help readability.
   - Drop some unused headers.
   - Use GENMASK where appropriate.
 * ad2s1200
   - Drop unnecessary includes and reorder alphabetically.
   - Reverse xmas tree and blank line cleanups.
 * atlas-ph-sensor
   - Use msleep instead of usleep_range where the precise value doesn't
     matter and the delays are long.
 * bcm150
   - Drop transaction splitting as core now handles it.
 * cros_ec
   - Move the shared header to the include/iio/common directory.
     This brings it inline with the other multiple type devices.
   - Use drvdata directly from device rather than boucing via the
     platform_device structure.
 * hid-sensors
   - Use drvdata directly from device rather than boucing via the
     platform_device structure.
 * inv_mpu6050
   - Clear out a second function definition for the same function.
   - Don't flush fifo when the iio buffer is full but just drop excess
     data.
   - Tidy up set_power_itg and ensure it is used in the right places.
   - Use set_power_itg rather than opencoding it again in the i2c mux
     control.
   - Make sure error paths disable the power if undoing power on.
   - Used managed devm_ functions during probe. Delete remove function.
   - Refactor to pull raw data read out of read_raw function.
   - Simplify data reading error paths.
   - Only enable the i2c mux for chips with the i2c aux bus (not icm20608)
   - Fix a potential deadlock due to varying lock ordering.
   - Fix an issue where first sample from gyro after enabling is unstable
     by dropping the first sample.
   - Fix an issue where the user_ctrl register is incorrectly overwritten.
   - Tidy up some grammar and spelling minor issus.
 * mcp320x
   - Use vendor compatible strings.
 * mcp4018
   - Switch to using i2c .probe_new.
 * mcp4351
   - switch to using i2c .probe_new.
 * meson-adc
   - rework handing on common ADC platform data so it can be shared
     across multiple families of SoCs.
 * sca3000
   - Fix an error handling path if the ring configure fails.
 * st_lsm6dsx
   - Fix a wrong fifo threshold mask (no actual effect)
 * stm32-dfsdm
   - Style fixes and cleanups.
   - Check filter ID is in range and check spi-max-frequency.
 * tsl2x7x (staging)
   - Drop some unnecessary function calls, unused variables and
     unnecessary local variables.
   - Fix wrong interrupt type.
   - Avoid unnecessary double clear of interrupt.
   - Simplify proximity calibration call which did various things
     unrelated to actually calibrating.
   - Separate control of the proximity and ALS interrupts.
   - Improve consistency of logging.
   - Separate ALS and proximity persistence settings as they have
     separate hardware controls.
   - Tidy up variable ordering.
   - Add Brian to copyright notice given consider work on this driver.
   - Take advantage of hardware support for I2C address auto increment.
   - Combine individuaal enable and period attributes for the two
     directions on the threshold events into a single value as the
     hardware doesn't separate them.
   - Move integration_time* attributes from light channel to
     intensity value as they effect the intensity readings directly
     and the light reading only indirectly.  Hence this better
     reflects reality. Also move the calibscale_available.
   - Avoid returning an error in the IRQ handler.
   - Hard code the reg value in _clear_interrupts as it only takes
     one value in the code.   Result is the function has little
     purpose so opencode the two remaining i2c_smbus_write_byte
     calls.
   - Drop some unnecessary checking of the chip status register.
   - Tidy up return path in _write_interrupt_config.
   - Tidy up the ID verification code.
   - Move the power and diode settings defines into the header as these
     are needed for platform data configuration.
   - Various renames and comment cleanups for consistency and clarity.
   - Use actual device defaults for default startup settings.
   - SPDX
   - Add some range sanity checking to sysfs attribute writes.
   - Don't provide event interfaces if the interrupt line isn't available.
   - Use IIO_CONST_ATTR macro for calibscale_available as it's a constant
     string.
   - Fix the integration time and lux equations.
   - Make device IDs explicit index values in the device_channel_config array.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlr0uigRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoiRhw//bIv57xenV6WV3+7Xmrp/rG4OBVzt8riD
 d9HczYKZE8/tqfB9cjF5e/xOpfin99eXBqEMWecidh3BxMNKXgnbvvCYCXF+m47D
 3cYlWvGbyZ2lbvqwbYCkk4xKfPNbRHBo5NX9TB08wf7DrAjmaudxmxDSFrRYQCho
 3Z3H2o54z1i/iJud61TApEONxr7H5oFdeb6uwNB5UVlG7XING9mfWbmlSzdlxW4X
 lHG4hC1/Pz/F4WjiLvNKccjhuq1f60CwSppKvfihq1IZKYKyHvSWjOicwrNb3QB2
 Kr0dT8yDqNKcKU1tsfgfR+YFeLKq52Ik4whulk8mkL7E4IWVIkGbL0ewkPwZ0YqO
 Cj9Nv52vzYS7x9Dj7R6f23Lwq30a19WKXixybjdo9zV14S0XKfzTmU7xC/4yhEjh
 yUg9QPjWxE5rAUTSjNF0C6tv786Y3aVYBp2jscIroSutipa6cUyc2rOKssM6GTZs
 vyRElGiUEXbg7uI7GrwN4PJszho47ptkFGn/o88Sy90KjUJ0mP15NTlp4IeSiVc/
 sM4YHHQ7tldcKqsaKeGbH8JwJNvzj9Kh20zniYd9lSZkeZusSkZUvd1FgB5uUocb
 ZZEG2IzCLM/utH49yXyaUkRS/lqoGCcObDkIHbsE1OM8q2bnZxaUYEMumxIpAs7l
 W2LBlr3vGF4=
 =egCX
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st round of IIO new device support, features and cleanup for the 4.18 cycle

A nice mix this time of excellent cleanups (many to send drivers
speeding toward staging graduations) and new drivers / device support.
A good part of this is Brian Masney's never ending task on the tsl2x7x
driver.  The end is in sight so hopefully we'll get that one out of
staging very soon!

New device support
* AD5686
  - Support AD5685R (was wrongly present as AD5685)
  - Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel
    SPI DACs with various precisions.
  - Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R
    I2C DACs with various percisions and numbers of channels.
* Analog front end rescale driver - New driver.
  - Support current sensing usings a shunt resistor.
  - Support simple voltage dividers.
  - support simple current sense amplifiers.
* TI dac5571
  - New driver and device bindings supporting:
    dac5571, dac6571, dac7571, dac5574, dac6574, dac7574,
    dac5573, dac6573 and dac7573
* Meson-adc
  - Support for Meson AXG with DT bindings.
* mpu6050
  - Support the mpu9255 which only requires additional WHOAMI entry and
    compatible string.
* st_lsm6dsx
  - Support for lsm330dlc combinded accelerometer and gyro sensors with
    DT bindings.
* stm32_adc
  - Add support for STM32MP1 with bindings.

Staging graduations
* adis16201 after some excelent cleanup by Himanshu Jha.
* adis16029 after some excelent cleanup by Shreeya Patel.

New features:
* ABI docs
  - Add core ABI docs for angle channels.
* inv_mpu6050
  - Provide support for the full range of interrupts the device
    supports.
* st_accel
  - Add SMO8840 ACPI ID seen in the wild on some Lenovo machines.
* stx104
  - Provide a multiple gpio get function.

Cleanups / Minor fixes
* core
  - Use new nested structure support to improve kernel-doc.
* ad2s1200
  - Use be16_to_cpup instead of opencoding.
* ad5686
  - Indentation tidy up.
  - Switch to SPDX
  - Refactor to allow various numbers of channels.
  - Refactor to separate core and SPI specific support, prior to
    addition of i2c equivalent devices.
* ad7606
  - Use drvdata directly from device rather than boucing via the
    platform_device structure.
* ad7746
  - Replace opencoded byte swapped i2c calls with _swapped variants.
  - White space and line break readability improvements.
  - Reorder includes and variable declarations where appropriate.
* ad7791
  - Changes to the AD ADC library used by this driver took in the
    sampling frequency.  This lead to be the wrong path being the one
    tied to the resulting attribute, so it didn't work, and a warning
    to be printed.
* ad7780
  - Remove apparent support for sampling frequency control on devices
    that don't support changing the sampling attributes.
* ade7854
  - Fix a read of the wrong number of bits.
  - Improve error handling on i2c read/write errors.
  - Rework i2c and spi code to reduce duplication.
* adis16201 (staging)
  - Improve meaning inherent in some macro names by adding units etc
    where relevant.
  - Adjust comments to improve detail and drop the irrelevant.
  - Rename register address definitions definitions to add a _REG
    postfix, clearly separating them from field definitions. Reorganize
    the definitions to group register address and fields.
  - Use sign_extend32 rather than open coding.
  - Reverse Xmas tree ordering where appropriate and align function args.
  - Remove unused headers.
  - Use GENMASK where appropriate instead of open coding.
* adis16209 (staging)
  - Indent field definitions to visually separate them from
    register address definitions.
  - Use reverse xmas tree ordering where appropriate.
  - Add some whitespace where it will help readability.
  - Drop some unused headers.
  - Use GENMASK where appropriate.
* ad2s1200
  - Drop unnecessary includes and reorder alphabetically.
  - Reverse xmas tree and blank line cleanups.
* atlas-ph-sensor
  - Use msleep instead of usleep_range where the precise value doesn't
    matter and the delays are long.
* bcm150
  - Drop transaction splitting as core now handles it.
* cros_ec
  - Move the shared header to the include/iio/common directory.
    This brings it inline with the other multiple type devices.
  - Use drvdata directly from device rather than boucing via the
    platform_device structure.
* hid-sensors
  - Use drvdata directly from device rather than boucing via the
    platform_device structure.
* inv_mpu6050
  - Clear out a second function definition for the same function.
  - Don't flush fifo when the iio buffer is full but just drop excess
    data.
  - Tidy up set_power_itg and ensure it is used in the right places.
  - Use set_power_itg rather than opencoding it again in the i2c mux
    control.
  - Make sure error paths disable the power if undoing power on.
  - Used managed devm_ functions during probe. Delete remove function.
  - Refactor to pull raw data read out of read_raw function.
  - Simplify data reading error paths.
  - Only enable the i2c mux for chips with the i2c aux bus (not icm20608)
  - Fix a potential deadlock due to varying lock ordering.
  - Fix an issue where first sample from gyro after enabling is unstable
    by dropping the first sample.
  - Fix an issue where the user_ctrl register is incorrectly overwritten.
  - Tidy up some grammar and spelling minor issus.
* mcp320x
  - Use vendor compatible strings.
* mcp4018
  - Switch to using i2c .probe_new.
* mcp4351
  - switch to using i2c .probe_new.
* meson-adc
  - rework handing on common ADC platform data so it can be shared
    across multiple families of SoCs.
* sca3000
  - Fix an error handling path if the ring configure fails.
* st_lsm6dsx
  - Fix a wrong fifo threshold mask (no actual effect)
* stm32-dfsdm
  - Style fixes and cleanups.
  - Check filter ID is in range and check spi-max-frequency.
* tsl2x7x (staging)
  - Drop some unnecessary function calls, unused variables and
    unnecessary local variables.
  - Fix wrong interrupt type.
  - Avoid unnecessary double clear of interrupt.
  - Simplify proximity calibration call which did various things
    unrelated to actually calibrating.
  - Separate control of the proximity and ALS interrupts.
  - Improve consistency of logging.
  - Separate ALS and proximity persistence settings as they have
    separate hardware controls.
  - Tidy up variable ordering.
  - Add Brian to copyright notice given consider work on this driver.
  - Take advantage of hardware support for I2C address auto increment.
  - Combine individuaal enable and period attributes for the two
    directions on the threshold events into a single value as the
    hardware doesn't separate them.
  - Move integration_time* attributes from light channel to
    intensity value as they effect the intensity readings directly
    and the light reading only indirectly.  Hence this better
    reflects reality. Also move the calibscale_available.
  - Avoid returning an error in the IRQ handler.
  - Hard code the reg value in _clear_interrupts as it only takes
    one value in the code.   Result is the function has little
    purpose so opencode the two remaining i2c_smbus_write_byte
    calls.
  - Drop some unnecessary checking of the chip status register.
  - Tidy up return path in _write_interrupt_config.
  - Tidy up the ID verification code.
  - Move the power and diode settings defines into the header as these
    are needed for platform data configuration.
  - Various renames and comment cleanups for consistency and clarity.
  - Use actual device defaults for default startup settings.
  - SPDX
  - Add some range sanity checking to sysfs attribute writes.
  - Don't provide event interfaces if the interrupt line isn't available.
  - Use IIO_CONST_ATTR macro for calibscale_available as it's a constant
    string.
  - Fix the integration time and lux equations.
  - Make device IDs explicit index values in the device_channel_config array.
2018-05-11 09:50:04 +02:00
Charles Keepax
5cb0789de1 iio: accel: bcm150: Remove handling for regmap raw_read_max
The regmap core now handles splitting up transactions according to
max_raw_read, so this code is no longer required in client drivers.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-28 17:01:55 +01:00
Hans de Goede
3d56e19815 iio: accel: st_accel: Add support for the SMO8840 ACPI id
The Lenovo Ideapad Miix 320 uses an st accelerometer with an ACPI id
of SMO8840, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-21 16:29:24 +01:00
Christophe JAILLET
da2d54494c iio: sca3000: Handle errors returned by 'sca3000_configure_ring()' in 'sca3000_probe()'
'sca3000_configure_ring()' can fail, so test its return value and
propagate it if needed.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 20:18:25 +01:00
Christophe JAILLET
4a5b45383c iio: sca3000: Fix an error handling path in 'sca3000_probe()'
Use 'devm_iio_kfifo_allocate()' instead of 'iio_kfifo_allocate()' in order
to simplify code and avoid a memory leak in an error path in
'sca3000_probe()'. A call to 'sca3000_unconfigure_ring()' was missing.

Sent via the next merge window as unimportant bug and there are
other patches dependent on it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-15 20:15:55 +01:00
Shreeya Patel
524c762844 Staging: iio: adis16209: Move adis16209 driver out of staging
Move the adis16209 driver out of staging directory and merge to the
mainline IIO subsystem.

Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-30 13:50:36 +01:00
Greg Kroah-Hartman
a0306db6e5 Merge 4.16-rc7 into staging-next
We want the IIO and staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28 13:33:37 +02:00
Himanshu Jha
591298e54c Staging: iio: accel: adis16201: Move adis16201 driver out of staging
Move adis16201 driver out of staging and merge into mainline
IIO subsystem.

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24 14:26:19 +00:00
Michael Nosthoff
8b438686a0 iio: st_pressure: st_accel: pass correct platform data to init
Commit 7383d44b added a pointer pdata which get set to the default
platform_data when non was defined in the device. But it did not
pass this pointer to the st_sensors_init_sensor call but still
used the maybe uninitialized platform_data from dev.

This breaks initialization when no platform_data is given and
the optional st,drdy-int-pin devicetree option is not set.

This commit fixes this.

Cc: stable@vger.kernel.org
Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly")
Signed-off-by: Michael Nosthoff <committed@heine.so>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10 16:28:05 +00:00
Jonathan Cameron
cc4e003631 Revert "iio: accel: st_accel: remove redundant pointer pdata"
This reverts commit 585ed27d06.

This removed code which was unused due to a bug in commit 7383d44b.
To fix this bug the code is needed. Thus this revert.

Signed-off-by: Michael Nosthoff <committed@heine.so>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10 16:21:32 +00:00
Rodrigo Siqueira
67464a54e5 iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW
Usually, functions responsible for reading raw data typically relies on
values from iio_chan_info_enum to correctly identify the type of data to
be read. There is a set of a device driver that uses the magic number 0
instead of IIO_CHAN_INFO_RAW. This patch improves the readability by
replaces the magic number 0 for the appropriate IIO_CHAN_INFO_RAW in six
devices driver in the IIO subsystem.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-07 20:14:36 +00:00
Andy Shevchenko
1b3079a721 iio: accel: bmc150: Remove redundant __func__ in dev_dbg()
Dynamic debug has a run time knob to enable function name printing.
Remove this from dev_dbg() calls.

Furthermore, functional tracing when enabled can show what function is
called, therefore remove empty dev_dbg() calls.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-24 13:29:36 +00:00
Xiongfeng Wang
cb60610af5 iio: accel: use strlcpy() instead of strncpy()
gcc-8 reports

drivers/iio/accel/st_accel_i2c.c: In function 'st_accel_i2c_probe':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 20 equals destination size [-Wstringop-truncation]

The compiler require that the length of the dest string is greater than
the length we want to copy to make sure the dest string is
nul-terminated. We can just use strlcpy() to avoid this warning.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30 18:33:14 +00:00
Martin Kepplinger
80e3f0103e iio: mma8452: replace license description with SPDX specifier
This replaces the custom license information text with the appropriate
SPDX identifier. While the information here stays the same, it is easier
to read.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: Harinath Nampally <harinath922@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 16:03:41 +01:00
Javier Martinez Canillas
798c3c9b4c iio: accel: bmc150: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

The I2C device ID table entries have the .driver_data field set, but they
are not used in the driver so weren't set in the OF device table entries.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 11:59:33 +00:00
Colin Ian King
585ed27d06 iio: accel: st_accel: remove redundant pointer pdata
Pointer pdata is being assigned but it is never being used, hence
it is redundant and can be removed. Cleans up clang warning:

drivers/iio/accel/st_accel_core.c:952:3: warning: Value stored to 'pdata'
is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:41:38 +00:00
Luke Ross
4c42bef0d3 iio:accel:da280: Linx 820 Windows tablet has a da280 mapped via ACPI
This adds an ACPI table to the driver and the ACPI ID of the sensor
on the tablet.

Signed-off-by: Luke Ross <luke@lukeross.name>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:41:33 +00:00
Harinath Nampally
a654c062dc iio: accel: mma8452: Rename config structs for readability
Rename structs holding event configuration registers
to more appropriate names. This naming is consistent
with the event config register names given in the
mma845x and fxls8471 datasheets.

Signed-off-by: Harinath Nampally <harinath922@gmail.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:39:56 +00:00
Harinath Nampally
cc54a660a6 iio: accel: mma8452: Rename a struct for code readibility
Rename time step look up struct to generic name
as the values in the look table are same for all
the other events like pulse, transient etc.

Signed-off-by: Harinath Nampally <harinath922@gmail.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:39:54 +00:00
Linus Walleij
9a0ebbc935 iio: adc/accel: Fix up module licenses
The module license checker complains about these two so just fix
it up. They are both GPLv2, both written by me or using code
I extracted while refactoring from the GPLv2 drivers.

Cc: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:39:43 +00:00
Linus Torvalds
449fcf3ab0 Staging/IIO patches for 4.15-rc1
Here is the "big" staging and IIO driver update for 4.15-rc1.
 
 Lots and lots of little changes, almost all minor code cleanups as the
 Outreachy application process happened during this development cycle.
 Also happened was a lot of IIO driver activity, and the typec USB code
 moving out of staging to drivers/usb (same commits are in the USB tree
 on a persistent branch to not cause merge issues.)
 
 Overall, it's a wash, I think we added a few hundred more lines than
 removed, but really only a few thousand were modified at all.
 
 All of these have been in linux-next for a while.  There might be a
 merge issue with Al's vfs tree in the pi433 driver (take his changes,
 they are always better), and the media tree with some of the odd atomisp
 cleanups (take the media tree's version).
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
 g3ioPBqmqC/2DSbldr2o
 =/ebw
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...
2017-11-13 20:53:28 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Gwendal Grignou
11b86c7004 platform/chrome: Add cros_ec_accel_legacy driver
Add driver to support older EC firmware that only support deprecated
ec command. Rely on ACPI memory map register to access sensor
information.
Present same interface as the regular cros_ec sensor stack:
- one iio device per accelerometer
- use HTML5 axis definition
- use iio abi units
- accept calibration calls, but do nothing
Chrome can use the same code than regular cros_ec sensor stack to
calculate orientation and lid angle.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14 20:34:01 +01:00
Lorenzo Bianconi
fea4d48661 iio: accel: add support to LIS3DHH
add support to STMicroelectronics LIS3DHH accel sensor

http://www.st.com/resource/en/datasheet/lis3dhh.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10 20:40:54 +01:00
Lorenzo Bianconi
a542f9a04d iio: st_sensors: split open-drain parameters for irq1 and irq2
Define st_sensor_int_drdy structure in st_sensor_data_ready_irq in order
to contain irq line parameters of the device.
Moreover separate data-ready open-drain configuration parameters for INT1
and INT2 pins in st_sensor_data_ready_irq data structure.
That change will be used to properly support LIS3DHH accel sensor.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10 20:38:39 +01:00
Lorenzo Bianconi
f94124f9fb iio: accel: add support to LIS2DW12
add support to STMicroelectronics LIS2DW12 accelerometer in
st_accel framework

http://www.st.com/resource/en/datasheet/lis2dw12.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 21:59:48 +01:00
Lorenzo Bianconi
75d4c6d2e1 iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
Separate data-ready configuration parameters for INT1 and INT2 pins in
st_sensor_data_ready_irq data structure. That change will be use to
properly support LIS2DW12 accel sensor.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 21:04:22 +01:00
Lorenzo Bianconi
e72a060151 iio: st_sensors: add register mask for status register
Introduce register mask for data-ready status register since
pressure sensors (e.g. LPS22HB) export just two channels
(BIT(0) and BIT(1)) and BIT(2) is marked reserved while in
st_sensors_new_samples_available() value read from status register
is masked using 0x7.
Moreover do not mask status register using active_scan_mask since
now status value is properly masked and if the result is not zero the
interrupt has to be consumed by the driver. This fix an issue on LPS25H
and LPS331AP where channel definition is swapped respect to status
register.
Furthermore that change allows to properly support new devices
(e.g LIS2DW12) that report just ZYXDA (data-ready) field in status register
to figure out if the interrupt has been generated by the device.

Fixes: 97865fe413 (iio: st_sensors: verify interrupt event to status)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 21:01:45 +01:00
Michał Mirosław
1540d0106b iio: accel: kxcjk1013: add support for KXTF9
KXTF9 has mostly compatible register layout to KXCJK accelerometer.
There is no motion direction interrupt support, but there is tap
direction detection instead (not implemented in this patch).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:50:06 +01:00
Michał Mirosław
d2ff1956ba iio: accel: kxcjk1013: make sampling_frequency_avail per-type
Make sampling_frequency_avail per-type - like sampling_frequency is.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:50:03 +01:00
Michał Mirosław
81fa8cb9f8 iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
In preparation for KXTF9 support, make sampling_frequency_avail
attribute dynamic.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:50:01 +01:00
Michał Mirosław
d8408e98f5 iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
Extract reporting of motion event direction from interrupt handler,
as it is not supported by KXTF9.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:49:58 +01:00
Michał Mirosław
f74e440c81 iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
Fix INT_CTRL1 bit names to match register name and add names
for INT_SRC1 bits.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:49:55 +01:00
Michał Mirosław
7469ac69db iio: accel: kxcjk1003: refactor ODR setting
Refactor ODR/WUF setting code in preparation of KXTF9 support.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:49:51 +01:00
Harinath Nampally
4febd9f184 iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
'mma8452_read_thresh' and 'mma8452_write_thresh' functions
does more than just read/write threshold values.
They also handle  IIO_EV_INFO_HIGH_PASS_FILTER_3DB and
IIO_EV_INFO_PERIOD therefore renaming to generic names.

Improves code readability, no impact on functionality.

Signed-off-by: Harinath Nampally <harinath922@gmail.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09 20:49:49 +01:00
Harinath Nampally
f8b7b30fb4 iio: accel: mma8452: Fix code style warning for unsigned int declarations
Replace 'unsigned' with 'unsigned int'
to improve code readability.

Issue found by checkpatch.

Signed-off-by: Harinath Nampally <harinath922@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-24 14:11:47 +01:00
Harinath Nampally
cd327b0047 iio: accel: mma8452: Fix code style warning
Replace symbolic permissions with octal permissions
to improve code readability.

Issue found by checkpatch.

Signed-off-by: Harinath Nampally <harinath922@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-24 14:11:24 +01:00
Harinath Nampally
605f72de13 iio: accel: mma8452: improvements to handle multiple events
This driver supports multiple devices like mma8653,
    mma8652, mma8452, mma8453 and fxls8471. Almost all
    these devices have more than one event.

    Current driver design hardcodes the event specific
    information, so only one event can be supported by this
    driver at any given time.
    Also current design doesn't have the flexibility to
    add more events.

    This patch improves by detaching the event related
    information from chip_info struct,and based on channel
    type and event direction the corresponding event
    configuration registers are picked dynamically.
    Hence both transient and freefall events can be
    handled in read/write callbacks.

    Changes are thoroughly tested on fxls8471 device on imx6UL
    Eval board using iio_event_monitor user space program.

    After this fix both Freefall and Transient events are
    handled by the driver without any conflicts.

Signed-off-by: Harinath Nampally <harinath922@gmail.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-13 17:49:58 +01:00
Jonathan Cameron
6c5bffa80e iio:accel: drop assign iio_info.driver_module and iio_trigger_ops.owner
The equivalent of both of these are now done via macro magic when
the relevant register calls are made.  The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 21:22:40 +01:00
Greg Kroah-Hartman
5e47adb906 Second set of IIO new device support, features and cleanup for the 4.14 cycle.
New device support:
 * ak8974
   - support the AMI306.
 * st_magnetometer
   - add support for the LIS2MDL with bindings.
 * rockchip-saradc
   - add binding for rv1108 SoC (no driver change).
 * srf08
   - add srf02 (i2c only) and srf10 support.
 * stm32-timer
   - support for the STM32H7 to existing driver.
 
 Features:
 * tools
   - move over to the tools buildsystem rather than hand rolling.
   - add an install section to the build.
 * ak8974
   - use serial number to add device randomness.
   - add AMI306 calibration data output.
 * ccs811
   - triggered buffer support.
 * srf08
   - add a device tree table as the old style i2c probing is going away,
   - add triggered buffer support
 * st32-adc
   - add optional st,min-sample-time-nsecs binding to allow control of
     sampling against analog circuitry.
 * stm32-timer
   - add output compare triggers.
 * ti-ads1015
   - add threshold event support.
 * ti-ads7950
   - Allow use on ACPI platforms including providing a default reference
     voltage as there is no way to obtain this on ACPI currently.
 
 Cleanup and fixes:
 * ad7606
   - fix an error return code in probe.
 * ads1015
   - fix incorrect data rate setting update when capture in progress,
   - fix wrong scale information for the ADS1115,
   - make conversions work when CONFIG_PM is not set,
   - make sure we don't get a stale result after a runtime resume by
     ensuring we wait long enough,
   - avoid returning a false error form the buffer setup callbacks,
   - add enough wait time to get the correct conversion,
   - remove an unnecessary config register update,
   - add a helper to set conversion mode reducing repeated boilerplate,
   - use devm_iio_triggered_buffer_setup to simplify error and remove
     paths,
   - use iio_device_claim_direct_mode instead of opencoding the same.
 * ak8974
   - mark the INT_CLEAR register as precious to prevent debugfs access.
 * apds9300
   - constify the i2c_device_id.
 * at91-sama5 adc
   - add missing Kconfig dependency.
 * bma180 accel
   - constify the i2c_device_id.
 * rockchip_saradc
   - explicitly request exclusive reset control as part of the reset rework
     on going throughout the kernel.
 * st_accel
   - fix drdy configuration for a load of accelerometers that only have
     the int1 line.  Fix is unimportant as presumably no deviec tree actually
     used the non existent hardware line.
 * st_pressure
   - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
     as they don't have this. Fix is unimportant as presumably no device tree
     actually used the non existent hardware line.
 * stm32-dac
   - explicitly request exclusive reset control (part of reset being reworked).
 * tsl2583
   - constify the i2c_device_id.
 * xadc
   - coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlmZpCcRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohlmQ/6A9FAI0wPGeEQCXDiLtIAWI1/DByYsHDk
 P3U6sFS17y56KAQcLS34HVR5lLreHya3hsUmPl4gCsjXZsGWAinyXy74BNtBbPmx
 LtzVsyLdjBP3Nxl/OGgNWG+kiq7Op+uw0/OZohtEqzurG0142S6CVvxteFlmhQNH
 pLlmPGnwk6Z4GsasHma/f2FkDD8oRVgvQSP7dJ9HIwq49qQ76cT/+20X1xODHLGw
 qpXfQiLUFW8E1JBTDDcXZD3M23TWG4DZcVlNnWf8fja/bk4WaLBKqVrI9gGZpZsQ
 xXfrSDRwc216w6tzVWjsNV/M0ZuSdm/VCBeyQa17XQVNelkO4dVrCqFMLCh5i/t5
 p4qhhV9mrbweIgDj++6c+4qMzWSAznWybAKMMlcucmwxHKefcrlgUniE03OzyPpG
 gpMS94enlVW8WpE/iYkxb/d6EqTM9CH2CJH6W4Ve/Xr4aQHkF5/P23k+nsW113of
 T1q1SCKegV9p7hIzqDqDmOQC7iNTcBcu+/7RYtkDn9jmmhiQAxwoPJZunkR1cxD8
 hA04x5W9HuPFdbNRlH1MozClbyRUtk0L/XLTKwA9T0VyRUKV1P6Szcp9wYRw+6G8
 QiA5NNrNPf17L6slLZ06N1auu6vO7BhTmYNKnd6VBO+vi7kF/FM2UdZGHof4WT/4
 zPE/BO8IwTk=
 =b6g8
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanup for the 4.14 cycle.

New device support:
* ak8974
  - support the AMI306.
* st_magnetometer
  - add support for the LIS2MDL with bindings.
* rockchip-saradc
  - add binding for rv1108 SoC (no driver change).
* srf08
  - add srf02 (i2c only) and srf10 support.
* stm32-timer
  - support for the STM32H7 to existing driver.

Features:
* tools
  - move over to the tools buildsystem rather than hand rolling.
  - add an install section to the build.
* ak8974
  - use serial number to add device randomness.
  - add AMI306 calibration data output.
* ccs811
  - triggered buffer support.
* srf08
  - add a device tree table as the old style i2c probing is going away,
  - add triggered buffer support
* st32-adc
  - add optional st,min-sample-time-nsecs binding to allow control of
    sampling against analog circuitry.
* stm32-timer
  - add output compare triggers.
* ti-ads1015
  - add threshold event support.
* ti-ads7950
  - Allow use on ACPI platforms including providing a default reference
    voltage as there is no way to obtain this on ACPI currently.

Cleanup and fixes:
* ad7606
  - fix an error return code in probe.
* ads1015
  - fix incorrect data rate setting update when capture in progress,
  - fix wrong scale information for the ADS1115,
  - make conversions work when CONFIG_PM is not set,
  - make sure we don't get a stale result after a runtime resume by
    ensuring we wait long enough,
  - avoid returning a false error form the buffer setup callbacks,
  - add enough wait time to get the correct conversion,
  - remove an unnecessary config register update,
  - add a helper to set conversion mode reducing repeated boilerplate,
  - use devm_iio_triggered_buffer_setup to simplify error and remove
    paths,
  - use iio_device_claim_direct_mode instead of opencoding the same.
* ak8974
  - mark the INT_CLEAR register as precious to prevent debugfs access.
* apds9300
  - constify the i2c_device_id.
* at91-sama5 adc
  - add missing Kconfig dependency.
* bma180 accel
  - constify the i2c_device_id.
* rockchip_saradc
  - explicitly request exclusive reset control as part of the reset rework
    on going throughout the kernel.
* st_accel
  - fix drdy configuration for a load of accelerometers that only have
    the int1 line.  Fix is unimportant as presumably no deviec tree actually
    used the non existent hardware line.
* st_pressure
  - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
    as they don't have this. Fix is unimportant as presumably no device tree
    actually used the non existent hardware line.
* stm32-dac
  - explicitly request exclusive reset control (part of reset being reworked).
* tsl2583
  - constify the i2c_device_id.
* xadc
  - coding style fixes.
2017-08-20 10:42:42 -07:00
Arvind Yadav
e05d83bc58 iio: accel: bma180: constify i2c_device_id
i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20 10:15:45 +01:00
Greg Kroah-Hartman
8652892ed4 Merge 4.13-rc5 into staging-next
We need it here for iio fixes.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-14 13:35:22 -07:00
Lorenzo Bianconi
4303741f99 iio: accel: st_accel: fix data-ready line configuration
Remove int2 configuration parameter for LIS3DH, LSM303DLHC, LSM330D,
LSM330DL, LSM330DLC, LSM303AGR, LIS2DH12 and LNG2DM since these devices
export just int1 as data-ready line

Fixes: 23cde4d65c (iio: Added platform data to select the DRDY pin)
Fixes: dcdb0a78ca (iio: accel: st_accel: add support to lng2dm)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-12 13:46:47 +01:00
Greg Kroah-Hartman
055655a9f0 First set of IIO fixes for the 4.13 cycle.
* ad2s1210
   - Fix negative angular velocity reads (identified by a gcc 7 warning)
 * aspeed-adc
   - Wait for initialization sequence to finish before enabling channels.
   Without it no channels work.
 * axp288
   - Revert a patch that dropped some bogus register mods.  No one is entirely
   sure why but it breaks charging on some devices.
   - Fix GPADC pin read returning 0. Turns out a small sleep is needed.
 * bmc150
   - Make sure device is restored to normal state after suspend / resume
   cycle.  Otherwise, simple sysfs reads are broken.
 * tsl2563
   - fix wrong event code.
 * st-accel
   - add spi 3-wire support. Needed to fix the lsm303agr accelerometer
   which only had 3 wires in all cases.  Side effect is to enable optional
   3-wire support for other devices.
 * st-pressure
   - disable multiread by default for LPS22HB (only effects SPI)
 * sun4i-gpadc-iio
   - fix unbalanced irq enable / disable
 * vf610
   - Fix VALT slection for REFSEL bits - ensures we are using the
   right reference pins.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAll0lYgRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoipzRAAk7wO9hvfl8UwgS6FTLVwQQHjP6MQSZ51
 USP2YN0hkBgDLKPQ2PbTt6t5jwboYPhOsd1n6iHWuAkje+W6Ie4JlXJBux/Gp9Wb
 GuZLLdFG+3Z1ZYcdDWRKs3u95vdku/5hFg63bxloPcpwkLzb82ykyQ4i9BjbGfv8
 jrig+l3eghkGp1kl1ChGdeegTcHAVIS/lPm8Ls0BwpWM30tW2Ip4XSkkm+T6IHvT
 8gPr1JMEJ5WaKEpDWKmitZQAr8jLAZ0dp9iLGh9qa2o0+OtX8gMYIas0bMHRR+UG
 3EM0wWaaeSaOuqYs8ZnqUQE2RcqP6plZWRmLR98rFLrAXPATX/HGMtZ+JQpKwEKm
 1H3XZAovwcppJ8X+XI7z6dZnpTCmQwwILYBpWvM/WWQCk2HZLZkFPOlkQyWCI4al
 3OhV+6o3XIl/M8aHepcRh3tpwYFDToNhLpo85EC6H7YtwaReY8tfXqNtlO8MMIKm
 1ZNVcA6NT8sdFwvyGtqg4yRIcQbx4Uarp11GgW5SSq13EgJ1LHEYC3lFrfn36pes
 D0oa01pA8hT6e7dPgqmFg6+J2XdWn8R1NVLRn+z+hjimr/BJlsxaZtk1JEJyS/ul
 qJS8UIEiwELUuze31uuz4QJJQHnPxuHlvM8EIf2c6vxg+l1CeMthXv7Hc9ht1vKg
 W/xgABUp/EY=
 =BApO
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 4.13 cycle.

* ad2s1210
  - Fix negative angular velocity reads (identified by a gcc 7 warning)
* aspeed-adc
  - Wait for initialization sequence to finish before enabling channels.
  Without it no channels work.
* axp288
  - Revert a patch that dropped some bogus register mods.  No one is entirely
  sure why but it breaks charging on some devices.
  - Fix GPADC pin read returning 0. Turns out a small sleep is needed.
* bmc150
  - Make sure device is restored to normal state after suspend / resume
  cycle.  Otherwise, simple sysfs reads are broken.
* tsl2563
  - fix wrong event code.
* st-accel
  - add spi 3-wire support. Needed to fix the lsm303agr accelerometer
  which only had 3 wires in all cases.  Side effect is to enable optional
  3-wire support for other devices.
* st-pressure
  - disable multiread by default for LPS22HB (only effects SPI)
* sun4i-gpadc-iio
  - fix unbalanced irq enable / disable
* vf610
  - Fix VALT slection for REFSEL bits - ensures we are using the
  right reference pins.
2017-07-23 20:54:31 -07:00
Hans de Goede
e59e18989c iio: accel: bmc150: Always restore device to normal mode after suspend-resume
After probe we would put the device in normal mode, after a runtime
suspend-resume we would put it back in normal mode. But for a regular
suspend-resume we would only put it back in normal mode if triggers
or events have been requested.  This is not consistent and breaks
reading raw values after a suspend-resume.

This commit changes the regular resume path to also unconditionally put
the device back in normal mode, fixing reading of raw values not working
after a regular suspend-resume cycle.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-17 21:36:54 +01:00
Lorenzo Bianconi
b30f159367 iio: accel: st_accel: rename H3LIS331DL_DRIVER_NAME in H3LIS331DL_ACCEL_DEV_NAME
In order to use the standard name convention rename H3LIS331DL_DRIVER_NAME
macro in H3LIS331DL_ACCEL_DEV_NAME

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 19:19:17 +01:00
Lorenzo Bianconi
2b96d66c20 iio: accel: st_accel_spi: add support to H3LIS331DL, LIS331DL, LIS3LV02DL
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 19:18:31 +01:00
Lorenzo Bianconi
6011208d8a iio: accel: st_accel_i2c: fix i2c_device_id table
Add H3LIS331DL, LIS331DL and LIS3LV02DL entries in st_accel_id_table

Fixes: 1e52fefc9b (iio: accel: Add support for the h3lis331dl accel)
Fixes: bbf5f037fa (iio: st_accel: support the LIS331DL sensor)
Fixes: 3acddf74f8 (iio: st-sensors: add support for lis3lv02d accel)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 19:16:52 +01:00
Colin Ian King
72e36017ee iio: accel: make array init_data static to reduce code size
Making the const array init_data static rather having it on the
stack saves us a couple hundreds of bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   3175	    848	      0	   4023	    fb7	drivers/iio/accel/da311.o

After:
   text	   data	    bss	    dec	    hex	filename
   2860	    936	      0	   3796	    ed4	drivers/iio/accel/da311.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 19:11:49 +01:00