do_machine_check() can be raised in almost any context including the most
fragile ones. Prevent kprobes and tracing.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200225220216.315548935@linutronix.de
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that .eh_frame sections for the files in setup.elf and realmode.elf
are not generated anymore, the linker scripts don't need the special
output section name /DISCARD/ any more.
Remove the one in the main kernel linker script as well, since there are
no .eh_frame sections already, and fix up a comment referencing .eh_frame.
Update the comment in asm/dwarf2.h referring to .eh_frame so it continues
to make sense, as well as being more specific.
[ bp: Touch up commit message. ]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200224232129.597160-3-nivedita@alum.mit.edu
issues found by "make W=1".
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeVBwcAAoJEL/70l94x66DB9AH/AxWhmtf6YVXMNyZjXydxa1f
hYVm9wg9GCsZS+7cktMhq0/uDEu5IjaCv7d+bzIcYZdFAOcs5nBUUjn1LtVl9w1y
48vobyOa8pXpORerBtZtaO1kt4sfFR63zm7uau32DzXrz3qpHlMUjPdL08A1e35V
cSSPAHHsl9S1TbDryc/VUNCOgauJes6LHbd3CdeAXU6lzMBW8JWbF2b/MAkvHG6n
Hw5LpicWSeTxoPjR4Oi0Yx3VKvWfS9608netSJmuCNsv36wrhzKR1iuyb3kNCkAy
AIlALn4PZq1Y5i1INi/XIkpC8d9yTqt5heRxYwp+yHadWO6E7ZMlITfxLZii+mM=
=7EpO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, including the fix for CVE-2020-2732 and a few issues found
by 'make W=1'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: rstify new ioctls in api.rst
KVM: nVMX: Check IO instruction VM-exit conditions
KVM: nVMX: Refactor IO bitmap checks into helper function
KVM: nVMX: Don't emulate instructions in guest mode
KVM: nVMX: Emulate MTF when performing instruction emulation
KVM: fix error handling in svm_hardware_setup
KVM: SVM: Fix potential memory leak in svm_cpu_init()
KVM: apic: avoid calculating pending eoi from an uninitialized val
KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled
KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1
kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled
KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE
KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow
KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
kvm/emulate: fix a -Werror=cast-function-type
KVM: x86: fix incorrect comparison in trace event
KVM: nVMX: Fix some obsolete comments and grammar error
KVM: x86: fix missing prototypes
KVM: x86: enable -Werror
Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused. They are unused, and even refer to a nonexistent
CONFIG option.
But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register. As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.
Add a check to look for overflows. Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.
This boots and passes the x86 pkey selftests.
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.com
Currently, we either return with an error [from efi_pe_entry()] or
enter a deadloop [in efi_main()] if any fatal errors occur during
execution of the EFI stub. Let's switch to calling the Exit() EFI boot
service instead in both cases, so that we
a) can get rid of the deadloop, and simply return to the boot manager
if any errors occur during execution of the stub, including during
the call to ExitBootServices(),
b) can also return cleanly from efi_pe_entry() or efi_main() in mixed
mode, once we introduce support for LoadImage/StartImage based mixed
mode in the next patch.
Note that on systems running downstream GRUBs [which do not use LoadImage
or StartImage to boot the kernel, and instead, pass their own image
handle as the loaded image handle], calling Exit() will exit from GRUB
rather than from the kernel, but this is a tolerable side effect.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of going through the EFI system table each time, just copy the
runtime services table pointer into struct efi directly. This is the
last use of the system table pointer in struct efi, allowing us to
drop it in a future patch, along with a fair amount of quirky handling
of the translated address.
Note that usually, the runtime services pointer changes value during
the call to SetVirtualAddressMap(), so grab the updated value as soon
as that call returns. (Mixed mode uses a 1:1 mapping, and kexec boot
enters with the updated address in the system table, so in those cases,
we don't need to do anything here)
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There is some code that exposes physical addresses of certain parts of
the EFI firmware implementation via sysfs nodes. These nodes are only
used on x86, and are of dubious value to begin with, so let's move
their handling into the x86 arch code.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit 33b85447fa ("efi/x86: Drop two near identical versions
of efi_runtime_init()"), we no longer map the EFI runtime services table
before calling SetVirtualAddressMap(), which means we don't need the 1:1
mapped physical address of this table, and so there is no point in passing
the address via EFI setup data on kexec boot.
Note that the kexec tools will still look for this address in sysfs, so
we still need to provide it.
Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the protocol definitions, GUIDs and mixed mode glue so that
the EFI loadfile protocol can be used from the stub. This will
be used in a future patch to load the initrd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We will be adding support for loading the initrd from a GUIDed
device path in a subsequent patch, so update the prototype of
the LocateDevicePath() boot service to make it callable from
our code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We now support cmdline data that is located in memory that is not
32-bit addressable, so relax the allocation limit on systems where
this feature is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit 5f3d45e7f2 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.
However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.
Fixes: 5f3d45e7f2 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 159348784f ("x86/vmx: Introduce VMX_FEATURES_*") missed
bit 26 (enable user wait and pause) of Secondary Processor-based
VM-Execution Controls.
Add VMX_FEATURE_USR_WAIT_PAUSE flag so that it shows up in /proc/cpuinfo,
and use it to define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE to make them
uniform.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A split-lock occurs when an atomic instruction operates on data that spans
two cache lines. In order to maintain atomicity the core takes a global bus
lock.
This is typically >1000 cycles slower than an atomic operation within a
cache line. It also disrupts performance on other cores (which must wait
for the bus lock to be released before their memory operations can
complete). For real-time systems this may mean missing deadlines. For other
systems it may just be very annoying.
Some CPUs have the capability to raise an #AC trap when a split lock is
attempted.
Provide a command line option to give the user choices on how to handle
this:
split_lock_detect=
off - not enabled (no traps for split locks)
warn - warn once when an application does a
split lock, but allow it to continue
running.
fatal - Send SIGBUS to applications that cause split lock
On systems that support split lock detection the default is "warn". Note
that if the kernel hits a split lock in any mode other than "off" it will
OOPs.
One implementation wrinkle is that the MSR to control the split lock
detection is per-core, not per thread. This might result in some short
lived races on HT systems in "warn" mode if Linux tries to enable on one
thread while disabling on the other. Race analysis by Sean Christopherson:
- Toggling of split-lock is only done in "warn" mode. Worst case
scenario of a race is that a misbehaving task will generate multiple
#AC exceptions on the same instruction. And this race will only occur
if both siblings are running tasks that generate split-lock #ACs, e.g.
a race where sibling threads are writing different values will only
occur if CPUx is disabling split-lock after an #AC and CPUy is
re-enabling split-lock after *its* previous task generated an #AC.
- Transitioning between off/warn/fatal modes at runtime isn't supported
and disabling is tracked per task, so hardware will always reach a steady
state that matches the configured mode. I.e. split-lock is guaranteed to
be enabled in hardware once all _TIF_SLD threads have been scheduled out.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200126200535.GB30377@agluck-desk2.amr.corp.intel.com
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn':
arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible
function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void
(*)(struct fastop *)' [-Werror=cast-function-type]
rc = fastop(ctxt, (fastop_t)ctxt->execute);
Fix it by using an unnamed union of a (*execute) function pointer and a
(*fastop) function pointer.
Fixes: 3009afc6e3 ("KVM: x86: Use a typedef for fastop functions")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit
aaf248848d ("perf/x86/msr: Add AMD IRPERF (Instructions Retired)
performance counter")
added support for access to the free-running counter via 'perf -e
msr/irperf/', but when exercised, it always returns a 0 count:
BEFORE:
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
624,833 instructions
0 msr/irperf/
Simply set its enable bit - HWCR bit 30 - to make it start counting.
Enablement is restricted to all machines advertising IRPERF capability,
except those susceptible to an erratum that makes the IRPERF return
bad values.
That erratum occurs in Family 17h models 00-1fh [1], but not in F17h
models 20h and above [2].
AFTER (on a family 17h model 31h machine):
$ perf stat -e instructions,msr/irperf/ true
Performance counter stats for 'true':
621,690 instructions
622,490 msr/irperf/
[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors
[2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors
The revision guides are available from the bugzilla Link below.
[ bp: Massage commit message. ]
Fixes: aaf248848d ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: http://lkml.kernel.org/r/20200214201805.13830-1-kim.phillips@amd.com
.. in order to fix a couple of -Wmissing-prototypes warnings.
No functional change.
[ bp: Massage commit message and drop newlines. ]
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200123152754.20149-1-b.thiel@posteo.de
All architectures which use the generic VDSO code have their own storage
for the VDSO clock mode. That's pointless and just requires duplicate code.
X86 abuses the function which retrieves the architecture specific clock
mode storage to mark the clocksource as used in the VDSO. That's silly
because this is invoked on every tick when the VDSO data is updated.
Move this functionality to the clocksource::enable() callback so it gets
invoked once when the clocksource is installed. This allows to make the
clock mode storage generic.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com> (Hyper-V parts)
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> (VDSO parts)
Acked-by: Juergen Gross <jgross@suse.com> (Xen parts)
Link: https://lkml.kernel.org/r/20200207124402.934519777@linutronix.de
Jumping out of line for the TSC clcoksource read is creating awful
code. TSC is likely to be the clocksource at least on bare metal and the PV
interfaces are sufficiently more work that the jump over the TSC read is
just in the noise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20200207124402.328922847@linutronix.de
Static keys have replaced TIF_NOHZ to optimize the calls to context
tracking. We can now safely remove that thread flag.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Evaluating _TIF_NOHZ to decide whether to use the slow syscall entry path
is not only pointless, it's actually counterproductive:
1) Context tracking code is invoked unconditionally before that flag is
evaluated.
2) If the flag is set the slow path is invoked for nothing due to #1
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Fix some typos in the comments. Also fix coding style.
[Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable
field in struct kvm_vcpu_arch.]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when the
TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused an
infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects PCI
devices with non-maskable MSI interrupts. The problem is caused by the
non-atomic writes of the MSI address (destination APIC id) and data
(vector) fields which the device uses to construct the MSI message. The
non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after writing
address and before writing data, then the MSI block constructs a
inconsistent message which causes interrupts to be lost and subsequent
malfunction of the device.
The fix is to redirect the interrupt to the new vector on the current
CPU first and then switch it over to the new target CPU. This allows to
observe an eventually raised interrupt in the transitional stage (old
CPU, new vector) to be observed in the APIC IRR and retriggered on the
new target CPU and the new vector. The potential spurious interrupts
caused by this are harmless and can in the worst case expose a buggy
driver (all handlers have to be able to deal with spurious interrupts as
they can and do happen for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall page
which prevents resume hibernation on HYPERV guests. This change got
lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent potentially
stale IOAPIC remote IRR bits which cause stale interrupt lines after
resume.
-----BEGIN PGP SIGNATURE-----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=WxKD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
* fix register corruption
* ENOTSUPP/EOPNOTSUPP mixed
* reset cleanups/fixes
* selftests
x86:
* Bug fixes and cleanups
* AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
* Compilation fix.
Generic:
* Fix refcount overflow for zero page.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeOuf7AAoJEL/70l94x66DOBQH/j1W9lUpbDgr9aWbrZT+O/yP
FWzUDrRlCZCjV1FQKbGPa4YLeDRTG5n+RIQTjmCGRqiMqeoELSJ1+iK99e97nG/u
L28zf/90Nf0R+wwHL4AOFeploTYfG4WP8EVnlr3CG2UCJrNjxN1KU7yRZoWmWa2d
ckLJ8ouwNvx6VZd233LVmT38EP4352d1LyqIL8/+oXDIyAcRJLFQu1gRCwagsh3w
1v1czowFpWnRQ/z9zU7YD+PA4v85/Ge8sVVHlpi1X5NgV/khk4U6B0crAw6M+la+
mTmpz9g56oAh9m9NUdtv4zDCz1EWGH0v8+ZkAajUKtrM0ftJMn57P6p8PH4VVlE=
=5+Wl
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
-----BEGIN PGP SIGNATURE-----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=tcy+
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
(Jason A. Donenfeld)
- Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
Sathyanarayanan)
* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ATS: Use PF PASID for VFs
x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
Three of the feature bits in vmxfeatures.h have names that are different
from the Intel SDM. The names have been adjusted recently in KVM but they
were using the old name in the tip tree's x86/cpu branch. Adjust for
consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD SVM AVIC accelerates EOI write and does not trap. This causes
in-kernel PIT re-injection mode to fail since it relies on irq-ack
notifier mechanism. So, APICv is activated only when in-kernel PIT
is in discard mode e.g. w/ qemu option:
-global kvm-pit.lost_tick_policy=discard
Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this
reason.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary
deactivated and fall back to using legacy interrupt injection via vINTR
and interrupt window.
Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Rename svm_request_update_avic to svm_toggle_avic_for_extint. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since AVIC does not currently work w/ nested virtualization,
deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM]
(i.e. indicate support for SVM, which is needed for nested virtualization).
Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for
this reason.
Suggested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since disabling APICv has to be done for all vcpus on AMD-based
system, adopt the newly introduced kvm_request_apicv_update()
interface, and introduce a new APICV_INHIBIT_REASON_HYPERV.
Also, remove the kvm_vcpu_deactivate_apicv() since no longer used.
Cc: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD SVM AVIC needs to update APIC backing page mapping before changing
APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl
function hook to be called prior KVM APICv update request to each vcpu.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inibit reason bits are used to determine if APICv deactivation is
applicable for a particular hardware virtualization architecture.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain runtime conditions require APICv to be temporary deactivated
during runtime. The current implementation only support run-time
deactivation of APICv when Hyper-V SynIC is enabled, which is not
temporary.
In addition, for AMD, when APICv is (de)activated at runtime,
all vcpus in the VM have to operate in the same mode. Thus the
requesting vcpu must notify the others.
So, introduce the following:
* A new KVM_REQ_APICV_UPDATE request bit
* Interfaces to request all vcpus to update APICv status
* A new interface to update APICV-related parameters for each vcpu
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several reasons in which a VM needs to deactivate APICv
e.g. disable APICv via parameter during module loading, or when
enable Hyper-V SynIC support. Additional inhibit reasons will be
introduced later on when dynamic APICv is supported,
Introduce KVM APICv inhibit reason bits along with a new variable,
apicv_inhibit_reasons, to help keep track of APICv state for each VM,
Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate
the case where APICv is disabled during KVM module load.
(e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0).
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recently, the to_pci_sysdata() helper was added inside the CONFIG_PCI
guard, but it is used inside a CONFIG_NUMA guard, which does not require
CONFIG_PCI. This breaks builds on !CONFIG_PCI machines. Make
to_pci_sysdata() available in all configurations.
Fixes: aad6aa0cd6 ("x86/PCI: Add to_pci_sysdata() helper")
Link: https://lore.kernel.org/r/20200203215306.172000-1-Jason@zx2c4.com
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
- Enable CMA
- Add support for MB v11
- Defconfig updates
- Minor fixes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXjlJ1gAKCRDKSWXLKUoM
IWy9AJ4tauV9sUb+zNadrYxI+2zemRstUwCfQ49LG4kHpFCv8ldSTmhBPJY/3MI=
=QpT4
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze update from Michal Simek:
- enable CMA
- add support for MB v11
- defconfig updates
- minor fixes
* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add ID for Microblaze v11
microblaze: Prevent the overflow of the start
microblaze: Wire CMA allocator
asm-generic: Make dma-contiguous.h a mandatory include/asm header
microblaze: Sync defconfig with latest Kconfig layout
microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
microblaze: Align comments with register usage
dma-continuguous.h is generic for all architectures except arm32 which has
its own version.
Similar change was done for msi.h by commit a1b39bae16
("asm-generic: Make msi.h a mandatory include/asm header")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
To enable x86 to use the generic walk_page_range() function, the callers
of ptdump_walk_pgd_level_debugfs() need to pass in the mm_struct.
This means that ptdump_walk_pgd_level_core() is now always passed a valid
pgd, so drop the support for pgd==NULL.
Link: http://lkml.kernel.org/r/20191218162402.45610-19-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To enable x86 to use the generic walk_page_range() function, the callers
of ptdump_walk_pgd_level() need to pass an mm_struct rather than the raw
pgd_t pointer. Luckily since commit 7e904a91bf ("efi: Use efi_mm in x86
as well as ARM") we now have an mm_struct for EFI on x86.
Link: http://lkml.kernel.org/r/20191218162402.45610-18-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For x86 we already have p?d_large() functions, so simply add macros to
provide the generic p?d_leaf() names for the generic code.
Link: http://lkml.kernel.org/r/20191218162402.45610-11-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CRNG hasn't initialized, instead of the old blocking pool. Also clean
up archrandom.h, and some other miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl40j1kACgkQ8vlZVpUN
gaPCywf8CWS9HFd2Iipj60gkTVugjlL5ib0lbfhQcAAwwzw1GLTXJSMBzzoMRHY/
ZI2sJZS1m0V1oWNnXXVKi+A1VXmlValWXAc+7fvbeaIe5pRT1EHP14s4Kz7/4d8Q
dk0b8cxNpR8u5CcbN8y9D+71IKpdksUbX7uGuGfw3bncQdRNwJVf+oS1fMGS0Rsb
F8ddQaED7iFpX2BMl56afQ4t2t0LA5+eLYMGoYoJx5fgd9BseP0TEcjj9Y4Z30M7
+GO4NZjUbAY0syx9r8hx3P/5miWZm2J9QJmJoXHhr5+IcAKM+6+Uo6X6gkOEqV4i
U//V1cqNuowV5ckE4Na+MfBillinsQ==
=HeFM
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random changes from Ted Ts'o:
"Change /dev/random so that it uses the CRNG and only blocking if the
CRNG hasn't initialized, instead of the old blocking pool. Also clean
up archrandom.h, and some other miscellaneous cleanups"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (24 commits)
s390x: Mark archrandom.h functions __must_check
powerpc: Mark archrandom.h functions __must_check
powerpc: Use bool in archrandom.h
x86: Mark archrandom.h functions __must_check
linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check
linux/random.h: Use false with bool
linux/random.h: Remove arch_has_random, arch_has_random_seed
s390: Remove arch_has_random, arch_has_random_seed
powerpc: Remove arch_has_random, arch_has_random_seed
x86: Remove arch_has_random, arch_has_random_seed
random: remove some dead code of poolinfo
random: fix typo in add_timer_randomness()
random: Add and use pr_fmt()
random: convert to ENTROPY_BITS for better code readability
random: remove unnecessary unlikely()
random: remove kernel.random.read_wakeup_threshold
random: delete code to pull data into pools
random: remove the blocking pool
random: make /dev/random be almost like /dev/urandom
random: ignore GRND_RANDOM in getentropy(2)
...
Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.
- Write address low 32bits
- Write address high 32bits (If supported by device)
- Write data
When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.
On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.
Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:
If MSI is disabled the PCI device is routing an interrupt to the legacy
INTx mechanism. The INTx delivery can be disabled, but the disablement is
not working on all devices.
Some devices lose interrupts when both MSI and INTx delivery are disabled.
Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.
Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.
That makes it possible to solve it with a two step update:
1) Target the MSI msg to the new vector on the current target CPU
2) Target the MSI msg to the new vector on the new target CPU
In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.
After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.
This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.
This can cause spurious interrupts on both the local and the new target
CPU.
1) If the new vector is not in use on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then interrupt entry code will
ignore that spurious interrupt. The vector is marked so that the
'No irq handler for vector' warning is supressed once.
2) If the new vector is in use already on the local CPU then the IRR check
might see an pending interrupt from the device which is using this
vector. The IPI to the new target CPU will then invoke the handler of
the device, which got the affinity change, even if that device did not
issue an interrupt
3) If the new vector is in use already on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then the handler of the device which
uses that vector on the local CPU will be invoked.
expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.
Reported-by: Evan Green <evgreen@chromium.org>
Debugged-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- three fixes and a cleanup for the resctrl code
- a HyperV fix
- a fix to /proc/kcore contents in live debugging sessions
- a fix for the x86 decoder opcode map"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/decoder: Add TEST opcode to Group3-2
x86/resctrl: Clean up unused function parameter in mkdir path
x86/resctrl: Fix a deadlock due to inaccurate reference
x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup
x86/resctrl: Fix use-after-free when deleting resource groups
x86/hyper-v: Add "polling" bit to hv_synic_sint
x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=y
PPC: Bugfixes
x86:
* Support for mapping DAX areas with large nested page table entries.
* Cleanups and bugfixes here too. A particularly important one is
a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to exploit
the guest kernel, for which the embargo expired today.
* Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
* Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling hyperthread
to read it), which unfortunately is an even bigger whack-a-mole game
than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large refactoring
of vCPU creation that affects all architectures but should not have any
visible effect.
s390 will come next week together with some more x86 patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeMxtCAAoJEL/70l94x66DQxIIAJv9hMmXLQHGFnUMskjGErR6
DCLSC0YRdRMwE50CerblyJtGsMwGsPyHZwvZxoAceKJ9w0Yay9cyaoJ87ItBgHoY
ce0HrqIUYqRSJ/F8WH2lSzkzMBr839rcmqw8p1tt4D5DIsYnxHGWwRaaP+5M/1KQ
YKFu3Hea4L00U339iIuDkuA+xgz92LIbsn38svv5fxHhPAyWza0rDEYHNgzMKuoF
IakLf5+RrBFAh6ZuhYWQQ44uxjb+uQa9pVmcqYzzTd5t1g4PV5uXtlJKesHoAvik
Eba8IEUJn+HgQJjhp3YxQYuLeWOwRF3bwOiZ578MlJ4OPfYXMtbdlqCQANHOcGk=
=H/q1
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"This is the first batch of KVM changes.
ARM:
- cleanups and corner case fixes.
PPC:
- Bugfixes
x86:
- Support for mapping DAX areas with large nested page table entries.
- Cleanups and bugfixes here too. A particularly important one is a
fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to
exploit the guest kernel, for which the embargo expired today.
- Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
- Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling
hyperthread to read it), which unfortunately is an even bigger
whack-a-mole game than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large
refactoring of vCPU creation that affects all architectures but should
not have any visible effect.
s390 will come next week together with some more x86 patches"
* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
x86/KVM: Clean up host's steal time structure
x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
x86/kvm: Cache gfn to pfn translation
x86/kvm: Introduce kvm_(un)map_gfn()
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
KVM: PPC: Book3S HV: Release lock on page-out failure path
KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
KVM: arm64: pmu: Only handle supported event counters
KVM: arm64: pmu: Fix chained SW_INCR counters
KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
KVM: x86: Use a typedef for fastop functions
KVM: X86: Add 'else' to unify fastop and execute call path
KVM: x86: inline memslot_valid_for_gpte
KVM: x86/mmu: Use huge pages for DAX-backed files
KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
KVM: x86/mmu: Zap any compound page when collapsing sptes
KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
...
Unfortunately, GCC 9.1 is expected to be be released without support for
MPX. This means that there was only a relatively small window where
folks could have ever used MPX. It failed to gain wide adoption in the
industry, and Linux was the only mainstream OS to ever support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge window.
-----BEGIN PGP SIGNATURE-----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=g4cC
-----END PGP SIGNATURE-----
Merge tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx
Pull x86 MPX removal from Dave Hansen:
"MPX requires recompiling applications, which requires compiler
support. Unfortunately, GCC 9.1 is expected to be be released without
support for MPX. This means that there was only a relatively small
window where folks could have ever used MPX. It failed to gain wide
adoption in the industry, and Linux was the only mainstream OS to ever
support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge
window when the MPX prctl()s were removed. XSAVE support is left in
place, which allows MPX-using KVM guests to continue to function"
* tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx:
x86/mpx: remove MPX from arch/x86
mm: remove arch_bprm_mm_init() hook
x86/mpx: remove bounds exception code
x86/mpx: remove build infrastructure
x86/alternatives: add missing insn.h include
From Boris Ostrovsky:
The KVM hypervisor may provide a guest with ability to defer remote TLB
flush when the remote VCPU is not running. When this feature is used,
the TLB flush will happen only when the remote VPCU is scheduled to run
again. This will avoid unnecessary (and expensive) IPIs.
Under certain circumstances, when a guest initiates such deferred action,
the hypervisor may miss the request. It is also possible that the guest
may mistakenly assume that it has already marked remote VCPU as needing
a flush when in fact that request had already been processed by the
hypervisor. In both cases this will result in an invalid translation
being present in a vCPU, potentially allowing accesses to memory locations
in that guest's address space that should not be accessible.
Note that only intra-guest memory is vulnerable.
The five patches address both of these problems:
1. The first patch makes sure the hypervisor doesn't accidentally clear
a guest's remote flush request
2. The rest of the patches prevent the race between hypervisor
acknowledging a remote flush request and guest issuing a new one.
Conflicts:
arch/x86/kvm/x86.c [move from kvm_arch_vcpu_free to kvm_arch_vcpu_destroy]
Now that we are mapping kvm_steal_time from the guest directly we
don't need keep a copy of it in kvm_vcpu_arch.st. The same is true
for the stime field.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__kvm_map_gfn()'s call to gfn_to_pfn_memslot() is
* relatively expensive
* in certain cases (such as when done from atomic context) cannot be called
Stashing gfn-to-pfn mapping should help with both cases.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There
are a couple of core and base updates around error propagation and
atomicity in the attribute container base we use for the SCSI
transport classes. The rest is minor changes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
01XYTd3p1VHuegIBHlk=
=Cn52
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.
There are a couple of core and base updates around error propagation
and atomicity in the attribute container base we use for the SCSI
transport classes.
The rest is minor changes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
scsi: hisi_sas: Replace magic number when handle channel interrupt
scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
scsi: hisi_sas: use threaded irq to process CQ interrupts
scsi: ufs: Use UFS device indicated maximum LU number
scsi: ufs: Add max_lu_supported in struct ufs_dev_info
scsi: ufs: Delete is_init_prefetch from struct ufs_hba
scsi: ufs: Inline two functions into their callers
scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
scsi: ufs: Split ufshcd_probe_hba() based on its called flow
scsi: ufs: Delete struct ufs_dev_desc
scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
scsi: ufs-mediatek: enable low-power mode for hibern8 state
scsi: ufs: export some functions for vendor usage
scsi: ufs-mediatek: add dbg_register_dump implementation
scsi: qla2xxx: Fix a NULL pointer dereference in an error path
scsi: qla1280: Make checking for 64bit support consistent
scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
...
Tony reported a boot regression caused by the recent workaround for systems
which have a disabled (clock gate off) PIT.
On his machine the kernel fails to initialize the PIT because
apic_needs_pit() does not take into account whether the local APIC
interrupt delivery mode will actually allow to setup and use the local
APIC timer. This should be easy to reproduce with acpi=off on the
command line which also disables HPET.
Due to the way the PIT/HPET and APIC setup ordering works (APIC setup can
require working PIT/HPET) the information is not available at the point
where apic_needs_pit() makes this decision.
To address this, split out the interrupt mode selection from
apic_intr_mode_init(), invoke the selection before making the decision
whether PIT is required or not, and add the missing checks into
apic_needs_pit().
Fixes: c8c4076723 ("x86/timer: Skip PIT initialization on modern chipsets")
Reported-by: Anthony Buckley <tony.buckley000@gmail.com>
Tested-by: Anthony Buckley <tony.buckley000@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Daniel Drake <drake@endlessm.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206125
Link: https://lore.kernel.org/r/87sgk6tmk2.fsf@nanos.tec.linutronix.de
Pull crypto updates from Herbert Xu:
"API:
- Removed CRYPTO_TFM_RES flags
- Extended spawn grabbing to all algorithm types
- Moved hash descsize verification into API code
Algorithms:
- Fixed recursive pcrypt dead-lock
- Added new 32 and 64-bit generic versions of poly1305
- Added cryptogams implementation of x86/poly1305
Drivers:
- Added support for i.MX8M Mini in caam
- Added support for i.MX8M Nano in caam
- Added support for i.MX8M Plus in caam
- Added support for A33 variant of SS in sun4i-ss
- Added TEE support for Raven Ridge in ccp
- Added in-kernel API to submit TEE commands in ccp
- Added AMD-TEE driver
- Added support for BCM2711 in iproc-rng200
- Added support for AES256-GCM based ciphers for chtls
- Added aead support on SEC2 in hisilicon"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
crypto: caam - add support for i.MX8M Plus
crypto: x86/poly1305 - emit does base conversion itself
crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
crypto: chacha20poly1305 - add back missing test vectors and test chunking
crypto: x86/poly1305 - fix .gitignore typo
tee: fix memory allocation failure checks on drv_data and amdtee
crypto: ccree - erase unneeded inline funcs
crypto: ccree - make cc_pm_put_suspend() void
crypto: ccree - split overloaded usage of irq field
crypto: ccree - fix PM race condition
crypto: ccree - fix FDE descriptor sequence
crypto: ccree - cc_do_send_request() is void func
crypto: ccree - fix pm wrongful error reporting
crypto: ccree - turn errors to debug msgs
crypto: ccree - fix AEAD decrypt auth fail
crypto: ccree - fix typo in comment
crypto: ccree - fix typos in error msgs
crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
crypto: x86/sha - Eliminate casts on asm implementations
...
Pull x86 cpu-features updates from Ingo Molnar:
"The biggest change in this cycle was a large series from Sean
Christopherson to clean up the handling of VMX features. This both
fixes bugs/inconsistencies and makes the code more coherent and
future-proof.
There are also two cleanups and a minor TSX syslog messages
enhancement"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/cpu: Remove redundant cpu_detect_cache_sizes() call
x86/cpu: Print "VMX disabled" error message iff KVM is enabled
KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
KVM: VMX: Check for full VMX support when verifying CPU compatibility
KVM: VMX: Use VMX feature flag to query BIOS enabling
KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
x86/vmx: Introduce VMX_FEATURES_*
x86/cpu: Clear VMX feature flag if VMX is not fully enabled
x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
x86/centaur: Use common IA32_FEAT_CTL MSR initialization
x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
x86/intel: Initialize IA32_FEAT_CTL MSR at boot
tools/x86: Sync msr-index.h from kernel sources
selftests, kvm: Replace manual MSR defs with common msr-index.h
...
On some platforms such as the Dell XPS 13 laptop the firmware disables turbo
when the machine is disconnected from AC, and viceversa it enables it again
when it's reconnected. In these cases a _PPC ACPI notification is issued.
The scheduler needs to know freq_max for frequency-invariant calculations.
To account for turbo availability to come and go, record freq_max at boot as
if turbo was available and store it in a helper variable. Use a setter
function to swap between freq_base and freq_max every time turbo goes off or on.
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-7-ggherdovich@suse.cz
Implement arch_scale_freq_capacity() for 'modern' x86. This function
is used by the scheduler to correctly account usage in the face of
DVFS.
The present patch addresses Intel processors specifically and has positive
performance and performance-per-watt implications for the schedutil cpufreq
governor, bringing it closer to, if not on-par with, the powersave governor
from the intel_pstate driver/framework.
Large performance gains are obtained when the machine is lightly loaded and
no regression are observed at saturation. The benchmarks with the largest
gains are kernel compilation, tbench (the networking version of dbench) and
shell-intensive workloads.
1. FREQUENCY INVARIANCE: MOTIVATION
* Without it, a task looks larger if the CPU runs slower
2. PECULIARITIES OF X86
* freq invariance accounting requires knowing the ratio freq_curr/freq_max
2.1 CURRENT FREQUENCY
* Use delta_APERF / delta_MPERF * freq_base (a.k.a "BusyMHz")
2.2 MAX FREQUENCY
* It varies with time (turbo). As an approximation, we set it to a
constant, i.e. 4-cores turbo frequency.
3. EFFECTS ON THE SCHEDUTIL FREQUENCY GOVERNOR
* The invariant schedutil's formula has no feedback loop and reacts faster
to utilization changes
4. KNOWN LIMITATIONS
* In some cases tasks can't reach max util despite how hard they try
5. PERFORMANCE TESTING
5.1 MACHINES
* Skylake, Broadwell, Haswell
5.2 SETUP
* baseline Linux v5.2 w/ non-invariant schedutil. Tested freq_max = 1-2-3-4-8-12
active cores turbo w/ invariant schedutil, and intel_pstate/powersave
5.3 BENCHMARK RESULTS
5.3.1 NEUTRAL BENCHMARKS
* NAS Parallel Benchmark (HPC), hackbench
5.3.2 NON-NEUTRAL BENCHMARKS
* tbench (10-30% better), kernbench (10-15% better),
shell-intensive-scripts (30-50% better)
* no regressions
5.3.3 SELECTION OF DETAILED RESULTS
5.3.4 POWER CONSUMPTION, PERFORMANCE-PER-WATT
* dbench (5% worse on one machine), kernbench (3% worse),
tbench (5-10% better), shell-intensive-scripts (10-40% better)
6. MICROARCH'ES ADDRESSED HERE
* Xeon Core before Scalable Performance processors line (Xeon Gold/Platinum
etc have different MSRs semantic for querying turbo levels)
7. REFERENCES
* MMTests performance testing framework, github.com/gormanm/mmtests
+-------------------------------------------------------------------------+
| 1. FREQUENCY INVARIANCE: MOTIVATION
+-------------------------------------------------------------------------+
For example; suppose a CPU has two frequencies: 500 and 1000 Mhz. When
running a task that would consume 1/3rd of a CPU at 1000 MHz, it would
appear to consume 2/3rd (or 66.6%) when running at 500 MHz, giving the
false impression this CPU is almost at capacity, even though it can go
faster [*]. In a nutshell, without frequency scale-invariance tasks look
larger just because the CPU is running slower.
[*] (footnote: this assumes a linear frequency/performance relation; which
everybody knows to be false, but given realities its the best approximation
we can make.)
+-------------------------------------------------------------------------+
| 2. PECULIARITIES OF X86
+-------------------------------------------------------------------------+
Accounting for frequency changes in PELT signals requires the computation of
the ratio freq_curr / freq_max. On x86 neither of those terms is readily
available.
2.1 CURRENT FREQUENCY
====================
Since modern x86 has hardware control over the actual frequency we run
at (because amongst other things, Turbo-Mode), we cannot simply use
the frequency as requested through cpufreq.
Instead we use the APERF/MPERF MSRs to compute the effective frequency
over the recent past. Also, because reading MSRs is expensive, don't
do so every time we need the value, but amortize the cost by doing it
every tick.
2.2 MAX FREQUENCY
=================
Obtaining freq_max is also non-trivial because at any time the hardware can
provide a frequency boost to a selected subset of cores if the package has
enough power to spare (eg: Turbo Boost). This means that the maximum frequency
available to a given core changes with time.
The approach taken in this change is to arbitrarily set freq_max to a constant
value at boot. The value chosen is the "4-cores (4C) turbo frequency" on most
microarchitectures, after evaluating the following candidates:
* 1-core (1C) turbo frequency (the fastest turbo state available)
* around base frequency (a.k.a. max P-state)
* something in between, such as 4C turbo
To interpret these options, consider that this is the denominator in
freq_curr/freq_max, and that ratio will be used to scale PELT signals such as
util_avg and load_avg. A large denominator will undershoot (util_avg looks a
bit smaller than it really is), viceversa with a smaller denominator PELT
signals will tend to overshoot. Given that PELT drives frequency selection
in the schedutil governor, we will have:
freq_max set to | effect on DVFS
--------------------+------------------
1C turbo | power efficiency (lower freq choices)
base freq | performance (higher util_avg, higher freq requests)
4C turbo | a bit of both
4C turbo proves to be a good compromise in a number of benchmarks (see below).
+-------------------------------------------------------------------------+
| 3. EFFECTS ON THE SCHEDUTIL FREQUENCY GOVERNOR
+-------------------------------------------------------------------------+
Once an architecture implements a frequency scale-invariant utilization (the
PELT signal util_avg), schedutil switches its frequency selection formula from
freq_next = 1.25 * freq_curr * util [non-invariant util signal]
to
freq_next = 1.25 * freq_max * util [invariant util signal]
where, in the second formula, freq_max is set to the 1C turbo frequency (max
turbo). The advantage of the second formula, whose usage we unlock with this
patch, is that freq_next doesn't depend on the current frequency in an
iterative fashion, but can jump to any frequency in a single update. This
absence of feedback in the formula makes it quicker to react to utilization
changes and more robust against pathological instabilities.
Compare it to the update formula of intel_pstate/powersave:
freq_next = 1.25 * freq_max * Busy%
where again freq_max is 1C turbo and Busy% is the percentage of time not spent
idling (calculated with delta_MPERF / delta_TSC); essentially the same as
invariant schedutil, and largely responsible for intel_pstate/powersave good
reputation. The non-invariant schedutil formula is derived from the invariant
one by approximating util_inv with util_raw * freq_curr / freq_max, but this
has limitations.
Testing shows improved performances due to better frequency selections when
the machine is lightly loaded, and essentially no change in behaviour at
saturation / overutilization.
+-------------------------------------------------------------------------+
| 4. KNOWN LIMITATIONS
+-------------------------------------------------------------------------+
It's been shown that it is possible to create pathological scenarios where a
CPU-bound task cannot reach max utilization, if the normalizing factor
freq_max is fixed to a constant value (see [Lelli-2018]).
If freq_max is set to 4C turbo as we do here, one needs to peg at least 5
cores in a package doing some busywork, and observe that none of those task
will ever reach max util (1024) because they're all running at less than the
4C turbo frequency.
While this concern still applies, we believe the performance benefit of
frequency scale-invariant PELT signals outweights the cost of this limitation.
[Lelli-2018]
https://lore.kernel.org/lkml/20180517150418.GF22493@localhost.localdomain/
+-------------------------------------------------------------------------+
| 5. PERFORMANCE TESTING
+-------------------------------------------------------------------------+
5.1 MACHINES
============
We tested the patch on three machines, with Skylake, Broadwell and Haswell
CPUs. The details are below, together with the available turbo ratios as
reported by the appropriate MSRs.
* 8x-SKYLAKE-UMA:
Single socket E3-1240 v5, Skylake 4 cores/8 threads
Max EFFiciency, BASE frequency and available turbo levels (MHz):
EFFIC 800 |********
BASE 3500 |***********************************
4C 3700 |*************************************
3C 3800 |**************************************
2C 3900 |***************************************
1C 3900 |***************************************
* 80x-BROADWELL-NUMA:
Two sockets E5-2698 v4, 2x Broadwell 20 cores/40 threads
Max EFFiciency, BASE frequency and available turbo levels (MHz):
EFFIC 1200 |************
BASE 2200 |**********************
8C 2900 |*****************************
7C 3000 |******************************
6C 3100 |*******************************
5C 3200 |********************************
4C 3300 |*********************************
3C 3400 |**********************************
2C 3600 |************************************
1C 3600 |************************************
* 48x-HASWELL-NUMA
Two sockets E5-2670 v3, 2x Haswell 12 cores/24 threads
Max EFFiciency, BASE frequency and available turbo levels (MHz):
EFFIC 1200 |************
BASE 2300 |***********************
12C 2600 |**************************
11C 2600 |**************************
10C 2600 |**************************
9C 2600 |**************************
8C 2600 |**************************
7C 2600 |**************************
6C 2600 |**************************
5C 2700 |***************************
4C 2800 |****************************
3C 2900 |*****************************
2C 3100 |*******************************
1C 3100 |*******************************
5.2 SETUP
=========
* The baseline is Linux v5.2 with schedutil (non-invariant) and the intel_pstate
driver in passive mode.
* The rationale for choosing the various freq_max values to test have been to
try all the 1-2-3-4C turbo levels (note that 1C and 2C turbo are identical
on all machines), plus one more value closer to base_freq but still in the
turbo range (8C turbo for both 80x-BROADWELL-NUMA and 48x-HASWELL-NUMA).
* In addition we've run all tests with intel_pstate/powersave for comparison.
* The filesystem is always XFS, the userspace is openSUSE Leap 15.1.
* 8x-SKYLAKE-UMA is capable of HWP (Hardware-Managed P-States), so the runs
with active intel_pstate on this machine use that.
This gives, in terms of combinations tested on each machine:
* 8x-SKYLAKE-UMA
* Baseline: Linux v5.2, non-invariant schedutil, intel_pstate passive
* intel_pstate active + powersave + HWP
* invariant schedutil, freq_max = 1C turbo
* invariant schedutil, freq_max = 3C turbo
* invariant schedutil, freq_max = 4C turbo
* both 80x-BROADWELL-NUMA and 48x-HASWELL-NUMA
* [same as 8x-SKYLAKE-UMA, but no HWP capable]
* invariant schedutil, freq_max = 8C turbo
(which on 48x-HASWELL-NUMA is the same as 12C turbo, or "all cores turbo")
5.3 BENCHMARK RESULTS
=====================
5.3.1 NEUTRAL BENCHMARKS
------------------------
Tests that didn't show any measurable difference in performance on any of the
test machines between non-invariant schedutil and our patch are:
* NAS Parallel Benchmarks (NPB) using either MPI or openMP for IPC, any
computational kernel
* flexible I/O (FIO)
* hackbench (using threads or processes, and using pipes or sockets)
5.3.2 NON-NEUTRAL BENCHMARKS
----------------------------
What follow are summary tables where each benchmark result is given a score.
* A tilde (~) means a neutral result, i.e. no difference from baseline.
* Scores are computed with the ratio result_new / result_baseline, so a tilde
means a score of 1.00.
* The results in the score ratio are the geometric means of results running
the benchmark with different parameters (eg: for kernbench: using 1, 2, 4,
... number of processes; for pgbench: varying the number of clients, and so
on).
* The first three tables show higher-is-better kind of tests (i.e. measured in
operations/second), the subsequent three show lower-is-better kind of tests
(i.e. the workload is fixed and we measure elapsed time, think kernbench).
* "gitsource" is a name we made up for the test consisting in running the
entire unit tests suite of the Git SCM and measuring how long it takes. We
take it as a typical example of shell-intensive serialized workload.
* In the "I_PSTATE" column we have the results for intel_pstate/powersave. Other
columns show invariant schedutil for different values of freq_max. 4C turbo
is circled as it's the value we've chosen for the final implementation.
80x-BROADWELL-NUMA (comparison ratio; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
pgbench-ro 1.14 ~ ~ | 1.11 | 1.14
pgbench-rw ~ ~ ~ | ~ | ~
netperf-udp 1.06 ~ 1.06 | 1.05 | 1.07
netperf-tcp ~ 1.03 ~ | 1.01 | 1.02
tbench4 1.57 1.18 1.22 | 1.30 | 1.56
+------+
8x-SKYLAKE-UMA (comparison ratio; higher is better)
+------+
I_PSTATE/HWP 1C 3C | 4C |
pgbench-ro ~ ~ ~ | ~ |
pgbench-rw ~ ~ ~ | ~ |
netperf-udp ~ ~ ~ | ~ |
netperf-tcp ~ ~ ~ | ~ |
tbench4 1.30 1.14 1.14 | 1.16 |
+------+
48x-HASWELL-NUMA (comparison ratio; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 12C
pgbench-ro 1.15 ~ ~ | 1.06 | 1.16
pgbench-rw ~ ~ ~ | ~ | ~
netperf-udp 1.05 0.97 1.04 | 1.04 | 1.02
netperf-tcp 0.96 1.01 1.01 | 1.01 | 1.01
tbench4 1.50 1.05 1.13 | 1.13 | 1.25
+------+
In the table above we see that active intel_pstate is slightly better than our
4C-turbo patch (both in reference to the baseline non-invariant schedutil) on
read-only pgbench and much better on tbench. Both cases are notable in which
it shows that lowering our freq_max (to 8C-turbo and 12C-turbo on
80x-BROADWELL-NUMA and 48x-HASWELL-NUMA respectively) helps invariant
schedutil to get closer.
If we ignore active intel_pstate and focus on the comparison with baseline
alone, there are several instances of double-digit performance improvement.
80x-BROADWELL-NUMA (comparison ratio; lower is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
dbench4 1.23 0.95 0.95 | 0.95 | 0.95
kernbench 0.93 0.83 0.83 | 0.83 | 0.82
gitsource 0.98 0.49 0.49 | 0.49 | 0.48
+------+
8x-SKYLAKE-UMA (comparison ratio; lower is better)
+------+
I_PSTATE/HWP 1C 3C | 4C |
dbench4 ~ ~ ~ | ~ |
kernbench ~ ~ ~ | ~ |
gitsource 0.92 0.55 0.55 | 0.55 |
+------+
48x-HASWELL-NUMA (comparison ratio; lower is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
dbench4 ~ ~ ~ | ~ | ~
kernbench 0.94 0.90 0.89 | 0.90 | 0.90
gitsource 0.97 0.69 0.69 | 0.69 | 0.69
+------+
dbench is not very remarkable here, unless we notice how poorly active
intel_pstate is performing on 80x-BROADWELL-NUMA: 23% regression versus
non-invariant schedutil. We repeated that run getting consistent results. Out
of scope for the patch at hand, but deserving future investigation. Other than
that, we previously ran this campaign with Linux v5.0 and saw the patch doing
better on dbench a the time. We haven't checked closely and can only speculate
at this point.
On the NUMA boxes kernbench gets 10-15% improvements on average; we'll see in
the detailed tables that the gains concentrate on low process counts (lightly
loaded machines).
The test we call "gitsource" (running the git unit test suite, a long-running
single-threaded shell script) appears rather spectacular in this table (gains
of 30-50% depending on the machine). It is to be noted, however, that
gitsource has no adjustable parameters (such as the number of jobs in
kernbench, which we average over in order to get a single-number summary
score) and is exactly the kind of low-parallelism workload that benefits the
most from this patch. When looking at the detailed tables of kernbench or
tbench4, at low process or client counts one can see similar numbers.
5.3.3 SELECTION OF DETAILED RESULTS
-----------------------------------
Machine : 48x-HASWELL-NUMA
Benchmark : tbench4 (i.e. dbench4 over the network, actually loopback)
Varying parameter : number of clients
Unit : MB/sec (higher is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate 5.2.0 1C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 126.73 +- 0.31% ( ) 315.91 +- 0.66% ( 149.28%) 125.03 +- 0.76% ( -1.34%)
Hmean 2 258.04 +- 0.62% ( ) 614.16 +- 0.51% ( 138.01%) 269.58 +- 1.45% ( 4.47%)
Hmean 4 514.30 +- 0.67% ( ) 1146.58 +- 0.54% ( 122.94%) 533.84 +- 1.99% ( 3.80%)
Hmean 8 1111.38 +- 2.52% ( ) 2159.78 +- 0.38% ( 94.33%) 1359.92 +- 1.56% ( 22.36%)
Hmean 16 2286.47 +- 1.36% ( ) 3338.29 +- 0.21% ( 46.00%) 2720.20 +- 0.52% ( 18.97%)
Hmean 32 4704.84 +- 0.35% ( ) 4759.03 +- 0.43% ( 1.15%) 4774.48 +- 0.30% ( 1.48%)
Hmean 64 7578.04 +- 0.27% ( ) 7533.70 +- 0.43% ( -0.59%) 7462.17 +- 0.65% ( -1.53%)
Hmean 128 6998.52 +- 0.16% ( ) 6987.59 +- 0.12% ( -0.16%) 6909.17 +- 0.14% ( -1.28%)
Hmean 192 6901.35 +- 0.25% ( ) 6913.16 +- 0.10% ( 0.17%) 6855.47 +- 0.21% ( -0.66%)
5.2.0 3C-turbo 5.2.0 4C-turbo 5.2.0 12C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 128.43 +- 0.28% ( 1.34%) 130.64 +- 3.81% ( 3.09%) 153.71 +- 5.89% ( 21.30%)
Hmean 2 311.70 +- 6.15% ( 20.79%) 281.66 +- 3.40% ( 9.15%) 305.08 +- 5.70% ( 18.23%)
Hmean 4 641.98 +- 2.32% ( 24.83%) 623.88 +- 5.28% ( 21.31%) 906.84 +- 4.65% ( 76.32%)
Hmean 8 1633.31 +- 1.56% ( 46.96%) 1714.16 +- 0.93% ( 54.24%) 2095.74 +- 0.47% ( 88.57%)
Hmean 16 3047.24 +- 0.42% ( 33.27%) 3155.02 +- 0.30% ( 37.99%) 3634.58 +- 0.15% ( 58.96%)
Hmean 32 4734.31 +- 0.60% ( 0.63%) 4804.38 +- 0.23% ( 2.12%) 4674.62 +- 0.27% ( -0.64%)
Hmean 64 7699.74 +- 0.35% ( 1.61%) 7499.72 +- 0.34% ( -1.03%) 7659.03 +- 0.25% ( 1.07%)
Hmean 128 6935.18 +- 0.15% ( -0.91%) 6942.54 +- 0.10% ( -0.80%) 7004.85 +- 0.12% ( 0.09%)
Hmean 192 6901.62 +- 0.12% ( 0.00%) 6856.93 +- 0.10% ( -0.64%) 6978.74 +- 0.10% ( 1.12%)
This is one of the cases where the patch still can't surpass active
intel_pstate, not even when freq_max is as low as 12C-turbo. Otherwise, gains are
visible up to 16 clients and the saturated scenario is the same as baseline.
The scores in the summary table from the previous sections are ratios of
geometric means of the results over different clients, as seen in this table.
Machine : 80x-BROADWELL-NUMA
Benchmark : kernbench (kernel compilation)
Varying parameter : number of jobs
Unit : seconds (lower is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate 5.2.0 1C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 379.68 +- 0.06% ( ) 330.20 +- 0.43% ( 13.03%) 285.93 +- 0.07% ( 24.69%)
Amean 4 200.15 +- 0.24% ( ) 175.89 +- 0.22% ( 12.12%) 153.78 +- 0.25% ( 23.17%)
Amean 8 106.20 +- 0.31% ( ) 95.54 +- 0.23% ( 10.03%) 86.74 +- 0.10% ( 18.32%)
Amean 16 56.96 +- 1.31% ( ) 53.25 +- 1.22% ( 6.50%) 48.34 +- 1.73% ( 15.13%)
Amean 32 34.80 +- 2.46% ( ) 33.81 +- 0.77% ( 2.83%) 30.28 +- 1.59% ( 12.99%)
Amean 64 26.11 +- 1.63% ( ) 25.04 +- 1.07% ( 4.10%) 22.41 +- 2.37% ( 14.16%)
Amean 128 24.80 +- 1.36% ( ) 23.57 +- 1.23% ( 4.93%) 21.44 +- 1.37% ( 13.55%)
Amean 160 24.85 +- 0.56% ( ) 23.85 +- 1.17% ( 4.06%) 21.25 +- 1.12% ( 14.49%)
5.2.0 3C-turbo 5.2.0 4C-turbo 5.2.0 8C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 284.08 +- 0.13% ( 25.18%) 283.96 +- 0.51% ( 25.21%) 285.05 +- 0.21% ( 24.92%)
Amean 4 153.18 +- 0.22% ( 23.47%) 154.70 +- 1.64% ( 22.71%) 153.64 +- 0.30% ( 23.24%)
Amean 8 87.06 +- 0.28% ( 18.02%) 86.77 +- 0.46% ( 18.29%) 86.78 +- 0.22% ( 18.28%)
Amean 16 48.03 +- 0.93% ( 15.68%) 47.75 +- 1.99% ( 16.17%) 47.52 +- 1.61% ( 16.57%)
Amean 32 30.23 +- 1.20% ( 13.14%) 30.08 +- 1.67% ( 13.57%) 30.07 +- 1.67% ( 13.60%)
Amean 64 22.59 +- 2.02% ( 13.50%) 22.63 +- 0.81% ( 13.32%) 22.42 +- 0.76% ( 14.12%)
Amean 128 21.37 +- 0.67% ( 13.82%) 21.31 +- 1.15% ( 14.07%) 21.17 +- 1.93% ( 14.63%)
Amean 160 21.68 +- 0.57% ( 12.76%) 21.18 +- 1.74% ( 14.77%) 21.22 +- 1.00% ( 14.61%)
The patch outperform active intel_pstate (and baseline) by a considerable
margin; the summary table from the previous section says 4C turbo and active
intel_pstate are 0.83 and 0.93 against baseline respectively, so 4C turbo is
0.83/0.93=0.89 against intel_pstate (~10% better on average). There is no
noticeable difference with regard to the value of freq_max.
Machine : 8x-SKYLAKE-UMA
Benchmark : gitsource (time to run the git unit test suite)
Varying parameter : none
Unit : seconds (lower is better)
5.2.0 vanilla 5.2.0 intel_pstate/hwp 5.2.0 1C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 858.85 +- 1.16% ( ) 791.94 +- 0.21% ( 7.79%) 474.95 ( 44.70%)
5.2.0 3C-turbo 5.2.0 4C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 475.26 +- 0.20% ( 44.66%) 474.34 +- 0.13% ( 44.77%)
In this test, which is of interest as representing shell-intensive
(i.e. fork-intensive) serialized workloads, invariant schedutil outperforms
intel_pstate/powersave by a whopping 40% margin.
5.3.4 POWER CONSUMPTION, PERFORMANCE-PER-WATT
---------------------------------------------
The following table shows average power consumption in watt for each
benchmark. Data comes from turbostat (package average), which in turn is read
from the RAPL interface on CPUs. We know the patch affects CPU frequencies so
it's reasonable to ignore other power consumers (such as memory or I/O). Also,
we don't have a power meter available in the lab so RAPL is the best we have.
turbostat sampled average power every 10 seconds for the entire duration of
each benchmark. We took all those values and averaged them (i.e. with don't
have detail on a per-parameter granularity, only on whole benchmarks).
80x-BROADWELL-NUMA (power consumption, watts)
+--------+
BASELINE I_PSTATE 1C 3C | 4C | 8C
pgbench-ro 130.01 142.77 131.11 132.45 | 134.65 | 136.84
pgbench-rw 68.30 60.83 71.45 71.70 | 71.65 | 72.54
dbench4 90.25 59.06 101.43 99.89 | 101.10 | 102.94
netperf-udp 65.70 69.81 66.02 68.03 | 68.27 | 68.95
netperf-tcp 88.08 87.96 88.97 88.89 | 88.85 | 88.20
tbench4 142.32 176.73 153.02 163.91 | 165.58 | 176.07
kernbench 92.94 101.95 114.91 115.47 | 115.52 | 115.10
gitsource 40.92 41.87 75.14 75.20 | 75.40 | 75.70
+--------+
8x-SKYLAKE-UMA (power consumption, watts)
+--------+
BASELINE I_PSTATE/HWP 1C 3C | 4C |
pgbench-ro 46.49 46.68 46.56 46.59 | 46.52 |
pgbench-rw 29.34 31.38 30.98 31.00 | 31.00 |
dbench4 27.28 27.37 27.49 27.41 | 27.38 |
netperf-udp 22.33 22.41 22.36 22.35 | 22.36 |
netperf-tcp 27.29 27.29 27.30 27.31 | 27.33 |
tbench4 41.13 45.61 43.10 43.33 | 43.56 |
kernbench 42.56 42.63 43.01 43.01 | 43.01 |
gitsource 13.32 13.69 17.33 17.30 | 17.35 |
+--------+
48x-HASWELL-NUMA (power consumption, watts)
+--------+
BASELINE I_PSTATE 1C 3C | 4C | 12C
pgbench-ro 128.84 136.04 129.87 132.43 | 132.30 | 134.86
pgbench-rw 37.68 37.92 37.17 37.74 | 37.73 | 37.31
dbench4 28.56 28.73 28.60 28.73 | 28.70 | 28.79
netperf-udp 56.70 60.44 56.79 57.42 | 57.54 | 57.52
netperf-tcp 75.49 75.27 75.87 76.02 | 76.01 | 75.95
tbench4 115.44 139.51 119.53 123.07 | 123.97 | 130.22
kernbench 83.23 91.55 95.58 95.69 | 95.72 | 96.04
gitsource 36.79 36.99 39.99 40.34 | 40.35 | 40.23
+--------+
A lower power consumption isn't necessarily better, it depends on what is done
with that energy. Here are tables with the ratio of performance-per-watt on
each machine and benchmark. Higher is always better; a tilde (~) means a
neutral ratio (i.e. 1.00).
80x-BROADWELL-NUMA (performance-per-watt ratios; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
pgbench-ro 1.04 1.06 0.94 | 1.07 | 1.08
pgbench-rw 1.10 0.97 0.96 | 0.96 | 0.97
dbench4 1.24 0.94 0.95 | 0.94 | 0.92
netperf-udp ~ 1.02 1.02 | ~ | 1.02
netperf-tcp ~ 1.02 ~ | ~ | 1.02
tbench4 1.26 1.10 1.06 | 1.12 | 1.26
kernbench 0.98 0.97 0.97 | 0.97 | 0.98
gitsource ~ 1.11 1.11 | 1.11 | 1.13
+------+
8x-SKYLAKE-UMA (performance-per-watt ratios; higher is better)
+------+
I_PSTATE/HWP 1C 3C | 4C |
pgbench-ro ~ ~ ~ | ~ |
pgbench-rw 0.95 0.97 0.96 | 0.96 |
dbench4 ~ ~ ~ | ~ |
netperf-udp ~ ~ ~ | ~ |
netperf-tcp ~ ~ ~ | ~ |
tbench4 1.17 1.09 1.08 | 1.10 |
kernbench ~ ~ ~ | ~ |
gitsource 1.06 1.40 1.40 | 1.40 |
+------+
48x-HASWELL-NUMA (performance-per-watt ratios; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 12C
pgbench-ro 1.09 ~ 1.09 | 1.03 | 1.11
pgbench-rw ~ 0.86 ~ | ~ | 0.86
dbench4 ~ 1.02 1.02 | 1.02 | ~
netperf-udp ~ 0.97 1.03 | 1.02 | ~
netperf-tcp 0.96 ~ ~ | ~ | ~
tbench4 1.24 ~ 1.06 | 1.05 | 1.11
kernbench 0.97 0.97 0.98 | 0.97 | 0.96
gitsource 1.03 1.33 1.32 | 1.32 | 1.33
+------+
These results are overall pleasing: in plenty of cases we observe
performance-per-watt improvements. The few regressions (read/write pgbench and
dbench on the Broadwell machine) are of small magnitude. kernbench loses a few
percentage points (it has a 10-15% performance improvement, but apparently the
increase in power consumption is larger than that). tbench4 and gitsource, which
benefit the most from the patch, keep a positive score in this table which is
a welcome surprise; that suggests that in those particular workloads the
non-invariant schedutil (and active intel_pstate, too) makes some rather
suboptimal frequency selections.
+-------------------------------------------------------------------------+
| 6. MICROARCH'ES ADDRESSED HERE
+-------------------------------------------------------------------------+
The patch addresses Xeon Core processors that use MSR_PLATFORM_INFO and
MSR_TURBO_RATIO_LIMIT to advertise their base frequency and turbo frequencies
respectively. This excludes the recent Xeon Scalable Performance processors
line (Xeon Gold, Platinum etc) whose MSRs have to be parsed differently.
Subsequent patches will address:
* Xeon Scalable Performance processors and Atom Goldmont/Goldmont Plus
* Xeon Phi (Knights Landing, Knights Mill)
* Atom Silvermont
+-------------------------------------------------------------------------+
| 7. REFERENCES
+-------------------------------------------------------------------------+
Tests have been run with the help of the MMTests performance testing
framework, see github.com/gormanm/mmtests. The configuration file names for
the benchmark used are:
db-pgbench-timed-ro-small-xfs
db-pgbench-timed-rw-small-xfs
io-dbench4-async-xfs
network-netperf-unbound
network-tbench
scheduler-unbound
workload-kerndevel-xfs
workload-shellscripts-xfs
hpc-nas-c-class-mpi-full-xfs
hpc-nas-c-class-omp-full
All those benchmarks are generally available on the web:
pgbench: https://www.postgresql.org/docs/10/pgbench.html
netperf: https://hewlettpackard.github.io/netperf/
dbench/tbench: https://dbench.samba.org/
gitsource: git unit test suite, github.com/git/git
NAS Parallel Benchmarks: https://www.nas.nasa.gov/publications/npb.html
hackbench: https://people.redhat.com/mingo/cfs-scheduler/tools/hackbench.c
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-2-ggherdovich@suse.cz
Pull misc x86 updates from Ingo Molnar:
"Misc changes:
- Enhance #GP fault printouts by distinguishing between canonical and
non-canonical address faults, and also add KASAN fault decoding.
- Fix/enhance the x86 NMI handler by putting the duration check into
a direct function call instead of an irq_work which we know to be
broken in some cases.
- Clean up do_general_protection() a bit"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Remove irq_work from the long duration NMI handler
x86/traps: Cleanup do_general_protection()
x86/kasan: Print original address on #GP
x86/dumpstack: Introduce die_addr() for die() with #GP fault address
x86/traps: Print address on #GP
x86/insn-eval: Add support for 64-bit kernel mode
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups all around the map"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Remove amd_get_topology_early()
x86/tsc: Remove redundant assignment
x86/crash: Use resource_size()
x86/cpu: Add a missing prototype for arch_smt_update()
x86/nospec: Remove unused RSB_FILL_LOOPS
x86/vdso: Provide missing include file
x86/Kconfig: Correct spelling and punctuation
Documentation/x86/boot: Fix typo
x86/boot: Fix a comment's incorrect file reference
x86/process: Remove set but not used variables prev and next
x86/Kconfig: Fix Kconfig indentation
Pull x86 asm updates from Ingo Molnar:
"Misc updates:
- Remove last remaining calls to exception_enter/exception_exit() and
simplify the entry code some more.
- Remove force_iret()
- Add support for "Fast Short Rep Mov", which is available starting
with Ice Lake Intel CPUs - and make the x86 assembly version of
memmove() use REP MOV for all sizes when FSRM is available.
- Micro-optimize/simplify the 32-bit boot code a bit.
- Use a more future-proof SYSRET instruction mnemonic"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Simplify calculation of output address
x86/entry/64: Add instruction suffix to SYSRET
x86: Remove force_iret()
x86/cpufeatures: Add support for fast short REP; MOVSB
x86/context-tracking: Remove exception_enter/exit() from KVM_PV_REASON_PAGE_NOT_PRESENT async page fault
x86/context-tracking: Remove exception_enter/exit() from do_page_fault()
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Ftrace is one of the last W^X violators (after this only KLP is
left). These patches move it over to the generic text_poke()
interface and thereby get rid of this oddity. This requires a
surprising amount of surgery, by Peter Zijlstra.
- x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to
count certain types of events that have a special, quirky hw ABI
(by Kim Phillips)
- kprobes fixes by Masami Hiramatsu
Lots of tooling updates as well, the following subcommands were
updated: annotate/report/top, c2c, clang, record, report/top TUI,
sched timehist, tests; plus updates were done to the gtk ui, libperf,
headers and the parser"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
perf/x86/amd: Add support for Large Increment per Cycle Events
perf/x86/amd: Constrain Large Increment per Cycle events
perf/x86/intel/rapl: Add Comet Lake support
tracing: Initialize ret in syscall_enter_define_fields()
perf header: Use last modification time for timestamp
perf c2c: Fix return type for histogram sorting comparision functions
perf beauty sockaddr: Fix augmented syscall format warning
perf/ui/gtk: Fix gtk2 build
perf ui gtk: Add missing zalloc object
perf tools: Use %define api.pure full instead of %pure-parser
libperf: Setup initial evlist::all_cpus value
perf report: Fix no libunwind compiled warning break s390 issue
perf tools: Support --prefix/--prefix-strip
perf report: Clarify in help that --children is default
tools build: Fix test-clang.cpp with Clang 8+
perf clang: Fix build with Clang 9
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
tools lib: Fix builds when glibc contains strlcpy()
perf report/top: Make 'e' visible in the help and make it toggle showing callchains
perf report/top: Do not offer annotation for symbols without samples
...
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Cleanup of the GOP [graphics output] handling code in the EFI stub
- Complete refactoring of the mixed mode handling in the x86 EFI stub
- Overhaul of the x86 EFI boot/runtime code
- Increase robustness for mixed mode code
- Add the ability to disable DMA at the root port level in the EFI
stub
- Get rid of RWX mappings in the EFI memory map and page tables,
where possible
- Move the support code for the old EFI memory mapping style into its
only user, the SGI UV1+ support code.
- plus misc fixes, updates, smaller cleanups.
... and due to interactions with the RWX changes, another round of PAT
cleanups make a guest appearance via the EFI tree - with no side
effects intended"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
efi/x86: Disable instrumentation in the EFI runtime handling code
efi/libstub/x86: Fix EFI server boot failure
efi/x86: Disallow efi=old_map in mixed mode
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
efi: Fix handling of multiple efi_fake_mem= entries
efi: Fix efi_memmap_alloc() leaks
efi: Add tracking for dynamically allocated memmaps
efi: Add a flags parameter to efi_memory_map
efi: Fix comment for efi_mem_type() wrt absent physical addresses
efi/arm: Defer probe of PCIe backed efifb on DT systems
efi/x86: Limit EFI old memory map to SGI UV machines
efi/x86: Avoid RWX mappings for all of DRAM
efi/x86: Don't map the entire kernel text RW for mixed mode
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
efi/libstub/x86: Fix unused-variable warning
efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
efi/libstub/x86: Use const attribute for efi_is_64bit()
efi: Allow disabling PCI busmastering on bridges during boot
efi/x86: Allow translating 64-bit arguments for mixed mode calls
...
Pull header cleanup from Ingo Molnar:
"This is a treewide cleanup, mostly (but not exclusively) with x86
impact, which breaks implicit dependencies on the asm/realtime.h
header and finally removes it from asm/acpi.h"
* 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove <asm/realmode.h> from <asm/acpi.h>
ACPI/sleep: Convert acpi_wakeup_address into a function
x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h
ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys()
vmw_balloon: Explicitly include linux/io.h for virt_to_phys()
virt: vbox: Explicitly include linux/io.h to pick up various defs
efi/capsule-loader: Explicitly include linux/io.h for page_to_phys()
perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys()
x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms()
x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms()
x86/boot: Explicitly include realmode.h to handle RM reservations
x86/efi: Explicitly include realmode.h to handle RM trampoline quirk
x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys()
x86/setup: Enhance the comments
x86/setup: Clean up the header portion of setup.c
- Time namespace support:
If a container migrates from one host to another then it expects that
clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime these
clocks can differ significantly on two hosts, in the worst case time
goes backwards which is a violation of the POSIX requirements.
The time namespace addresses this problem. It allows to set offsets for
clock MONOTONIC and BOOTTIME once after creation and before tasks are
associated with the namespace. These offsets are taken into account by
timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided by
this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric potential
use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (host time offsets = 0) is
in the noise and great effort was made to ensure that especially in the
VDSO. If time namespace is disabled in the kernel configuration the
code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature
and kept on for more than a year addressing review comments, finding
better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure that
the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code.
-----BEGIN PGP SIGNATURE-----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=x3qT
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
- Update the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it, add
ACPI support to the intel_idle driver based on that and clean
up that driver somewhat (Rafael Wysocki).
- Add an admin guide document for the intel_idle driver (Rafael
Wysocki).
- Clean up cpuidle core and drivers, enable compilation testing
for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
Wysocki, Yangtao Li).
- Fix reference counting of OPP (operating performance points) table
structures (Viresh Kumar).
- Add support for CPR (Core Power Reduction) to the AVS (Adaptive
Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
YueHaibing).
- Add support for TigerLake Mobile and JasperLake to the Intel RAPL
power capping driver (Zhang Rui).
- Update cpufreq drivers:
* Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
* Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
* Fix cpufreq policy reference counting issues in s3c and
brcmstb-avs (chenqiwu).
* Fix ACPI table reference counting issue and HiSilicon quirk
handling in the CPPC driver (Hanjun Guo).
* Clean up spelling mistake in intel_pstate (Harry Pan).
* Convert the kirkwood and tegra186 drivers to using
devm_platform_ioremap_resource() (Yangtao Li).
- Update devfreq core:
* Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
* Clean up the handing of transition statistics and allow them
to be reset by writing 0 to the 'trans_stat' devfreq device
attribute in sysfs (Kamil Konieczny).
* Add 'devfreq_summary' to debugfs (Chanwoo Choi).
* Clean up kerneldoc comments and Kconfig indentation (Krzysztof
Kozlowski, Randy Dunlap).
- Update devfreq drivers:
* Add dynamic scaling for the imx8m DDR controller and clean up
imx8m-ddrc (Leonard Crestez, YueHaibing).
* Fix DT node reference counting and nitialization error code path
in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
for it (Chanwoo Choi, Yangtao Li).
* Fix DT node reference counting in rockchip-dfi and make it use
devm_platform_ioremap_resource() (Yangtao Li).
* Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
* Fix initialization error code paths in exynos-bus (Yangtao Li).
* Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
Kozlowski).
- Add tracepoints for tracking usage_count updates unrelated to
status changes in PM-runtime (Michał Mirosław).
- Add sysfs attribute to control the "sync on suspend" behavior
during system-wide suspend (Jonas Meurer).
- Switch system-wide suspend tests over to 64-bit time (Alexandre
Belloni).
- Make wakeup sources statistics in debugfs cover deleted ones which
used to be the case some time ago (zhuguangqing).
- Clean up computations carried out during hibernation, update
messages related to hibernation and fix a spelling mistake in one
of them (Wen Yang, Luigi Semenzato, Colin Ian King).
- Add mailmap entry for maintainer e-mail address that has not been
functional for several years (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=g48u
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add ACPI support to the intel_idle driver along with an admin
guide document for it, add support for CPR (Core Power Reduction) to
the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support
in a few places, add some new sysfs attributes, debugfs files and
tracepoints, fix bugs and clean up a bunch of things all over.
Specifics:
- Update the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it, add ACPI
support to the intel_idle driver based on that and clean up that
driver somewhat (Rafael Wysocki).
- Add an admin guide document for the intel_idle driver (Rafael
Wysocki).
- Clean up cpuidle core and drivers, enable compilation testing for
some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
Wysocki, Yangtao Li).
- Fix reference counting of OPP (operating performance points) table
structures (Viresh Kumar).
- Add support for CPR (Core Power Reduction) to the AVS (Adaptive
Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
YueHaibing).
- Add support for TigerLake Mobile and JasperLake to the Intel RAPL
power capping driver (Zhang Rui).
- Update cpufreq drivers:
- Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
- Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
- Fix cpufreq policy reference counting issues in s3c and
brcmstb-avs (chenqiwu).
- Fix ACPI table reference counting issue and HiSilicon quirk
handling in the CPPC driver (Hanjun Guo).
- Clean up spelling mistake in intel_pstate (Harry Pan).
- Convert the kirkwood and tegra186 drivers to using
devm_platform_ioremap_resource() (Yangtao Li).
- Update devfreq core:
- Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
- Clean up the handing of transition statistics and allow them to
be reset by writing 0 to the 'trans_stat' devfreq device
attribute in sysfs (Kamil Konieczny).
- Add 'devfreq_summary' to debugfs (Chanwoo Choi).
- Clean up kerneldoc comments and Kconfig indentation (Krzysztof
Kozlowski, Randy Dunlap).
- Update devfreq drivers:
- Add dynamic scaling for the imx8m DDR controller and clean up
imx8m-ddrc (Leonard Crestez, YueHaibing).
- Fix DT node reference counting and nitialization error code path
in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
for it (Chanwoo Choi, Yangtao Li).
- Fix DT node reference counting in rockchip-dfi and make it use
devm_platform_ioremap_resource() (Yangtao Li).
- Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
- Fix initialization error code paths in exynos-bus (Yangtao Li).
- Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
Kozlowski).
- Add tracepoints for tracking usage_count updates unrelated to
status changes in PM-runtime (Michał Mirosław).
- Add sysfs attribute to control the "sync on suspend" behavior
during system-wide suspend (Jonas Meurer).
- Switch system-wide suspend tests over to 64-bit time (Alexandre
Belloni).
- Make wakeup sources statistics in debugfs cover deleted ones which
used to be the case some time ago (zhuguangqing).
- Clean up computations carried out during hibernation, update
messages related to hibernation and fix a spelling mistake in one
of them (Wen Yang, Luigi Semenzato, Colin Ian King).
- Add mailmap entry for maintainer e-mail address that has not been
functional for several years (Rafael Wysocki)"
* tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
intel_idle: Clean up irtl_2_usec()
intel_idle: Move 3 functions closer to their callers
intel_idle: Annotate initialization code and data structures
intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
intel_idle: Rearrange intel_idle_cpuidle_driver_init()
intel_idle: Clean up NULL pointer check in intel_idle_init()
intel_idle: Fold intel_idle_probe() into intel_idle_init()
intel_idle: Eliminate __setup_broadcast_timer()
cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
cpuidle: sysfs: fix warnings when compiling with W=1
cpuidle: coupled: fix warnings when compiling with W=1
cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
PM / devfreq: Add debugfs support with devfreq_summary file
Documentation: admin-guide: PM: Add intel_idle document
cpuidle: arm: Enable compile testing for some of drivers
PM-runtime: add tracepoints for usage_count changes
cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
...
Add a helper, lookup_address_in_mm(), to traverse the page tables of a
given mm struct. KVM will use the helper to retrieve the host mapping
level, e.g. 4k vs. 2mb vs. 1gb, of a compound (or DAX-backed) page
without having to resort to implementation specific metadata. E.g. KVM
currently uses different logic for HugeTLB vs. THP, and would add a
third variant for DAX-backed files.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The helper x86_set_memory_region() is only used in vmx_set_tss_addr()
and kvm_arch_destroy_vm(). Push the lock upper in both cases. With
that, drop x86_set_memory_region().
This prepares to allow __x86_set_memory_region() to return a HVA
mapped, because the HVA will need to be protected by the lock too even
after __x86_set_memory_region() returns.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current SVM implementation does not have support for handling PKU. Guests
running on a host with future AMD cpus that support the feature will read
garbage from the PKRU register and will hit segmentation faults on boot as
memory is getting marked as protected that should not be. Ensure that cpuid
from SVM does not advertise the feature.
Signed-off-by: John Allen <john.allen@amd.com>
Cc: stable@vger.kernel.org
Fixes: 0556cbdc2f ("x86/pkeys: Don't check if PKRU is zero before writing it")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
- New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver
-----BEGIN PGP SIGNATURE-----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=mv1v
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
* Support left round button on ASUS N56VB
* Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
* Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
* Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
* Touchscreen support for the PiPO W11 tablet
The following is an automated git shortlog grouped by driver:
asus-nb-wmi:
- Support left round button on N56VB
asus-wmi:
- Fix keyboard brightness cannot be set to 0
- Set throttle thermal policy to default
- Support throttle thermal policy
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
- Style changes
- Add missed attribute for mlxreg-io sysfs interfaces
- Fix documentation inconsistency for mlxreg-io sysfs interfaces
GPD pocket fan:
- Allow somewhat lower/higher temperature limits
- Use default values when wrong modparams are given
intel_atomisp2_pm:
- Spelling fixes
- Refactor timeout loop
intel_mid_powerbtn:
- Take a copy of ddata
intel_pmc_core:
- update Comet Lake platform driver
- Fix spelling of MHz unit
- Fix indentation in function definitions
- Put more stuff under #ifdef DEBUG_FS
- Respect error code of kstrtou32_from_user()
- Add Intel Elkhart Lake support
- Add Intel Tiger Lake support
- Make debugfs entry for pch_ip_power_gating_status conditional
- Create platform dependent bitmap structs
- Remove unnecessary assignments
- Clean up: Remove comma after the termination line
intel_pmc_ipc:
- Switch to use driver->dev_groups
- Propagate error from kstrtoul()
- Use octal permissions in sysfs attributes
- Get rid of unnecessary includes
- Drop ipc_data_readb()
- Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
- Make intel_pmc_ipc_raw_cmd() static
- Make intel_pmc_ipc_simple_command() static
- Make intel_pmc_gcr_update() static
intel_scu_ipc:
- Reformat kernel-doc comments of exported functions
- Drop intel_scu_ipc_raw_command()
- Drop intel_scu_ipc_io[read|write][8|16]()
- Drop unused macros
- Drop unused prototype intel_scu_ipc_fw_update()
- Sleeping is fine when polling
- Drop intel_scu_ipc_i2c_cntrl()
- Remove Lincroft support
- Add constants for register offsets
- Fix interrupt support
intel_scu_ipcutil:
- Remove default y from Kconfig
intel_telemetry_debugfs:
- Respect error code of kstrtou32_from_user()
intel_telemetry_pltdrv:
- use devm_platform_ioremap_resource()
mlx-platform:
- Add support for next generation systems
- Add support for new capability register
- Add support for new system type
- Set system mux configuration based on system type
- Add more definitions for system attributes
- Cosmetic changes
platform/mellanox:
- mlxreg-hotplug: Add support for new capability register
- fix potential deadlock in the tmfifo driver
tools/power/x86/intel-speed-select:
- Update version
- Change the order for clos disable
- Fix result display for turbo-freq auto mode
- Add support for core-power discovery
- Allow additional core-power mailbox commands
- Update MAINTAINERS for the intel uncore frequency control
- Add support for Uncore frequency control
touchscreen_dmi:
- Fix indentation in several places
- Add info for the PiPO W11 tablet
-----BEGIN PGP SIGNATURE-----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=rMop
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Enable thermal policy for ASUS TUF FX705DY/FX505DY
- Support left round button on ASUS N56VB
- Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
- Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
driver
- Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers
- Touchscreen support for the PiPO W11 tablet
* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
platform/x86: intel_scu_ipc: Drop unused macros
platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
platform/x86: intel_scu_ipc: Sleeping is fine when polling
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
platform/x86: intel_scu_ipc: Remove Lincroft support
platform/x86: intel_scu_ipc: Add constants for register offsets
platform/x86: intel_scu_ipc: Fix interrupt support
platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
...
Pull x86 microcode update from Borislav Petkov:
"Another boring branch this time around: mark a stub function inline,
by Valdis Kletnieks"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Make stub function static inline
We must not use the pointer output without validating the
success of the random read.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-8-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the expansion of these macros directly in arch_get_random_*.
These symbols are currently part of the generic archrandom.h
interface, but are currently unused and can be removed.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-2-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Expose VMD's pci_dev pointer in struct pci_sysdata. This will be used
indirectly by intel-iommu.c to find the correct domain.
Link: https://lore.kernel.org/r/1579613871-301529-3-git-send-email-jonathan.derrick@intel.com
[bhelgaas: commit log]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Various helpers need the pci_sysdata just to dereference a single field in
it. Add a little helper that returns the properly typed sysdata pointer to
require a little less boilerplate code.
[jonathan.derrick: to_pci_sysdata const argument]
Link: https://lore.kernel.org/r/1579613871-301529-2-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the kvm_cpu_{un}init() calls to common x86 code as an intermediate
step to removing kvm_cpu_{un}init() altogether.
Note, VMX'x alloc_apic_access_page() and init_rmode_identity_map() are
per-VM allocations and are intentionally kept if vCPU creation fails.
They are freed by kvm_arch_destroy_vm().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move allocation of VMX and SVM vcpus to common x86. Although the struct
being allocated is technically a VMX/SVM struct, it can be interpreted
directly as a 'struct kvm_vcpu' because of the pre-existing requirement
that 'struct kvm_vcpu' be located at offset zero of the arch/vendor vcpu
struct.
Remove the message from the build-time assertions regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the introduction of MOVDIR64B instruction, there is now an instruction
that can write 64 bytes of data atomically.
Quoting from Intel SDM:
"There is no atomicity guarantee provided for the 64-byte load operation
from source address, and processor implementations may use multiple
load operations to read the 64-bytes. The 64-byte direct-store issued
by MOVDIR64B guarantees 64-byte write-completion atomicity. This means
that the data arrives at the destination in a single undivided 64-byte
write transaction."
We have identified at least 3 different use cases for this instruction in
the format of func(dst, src, count):
1) Clear poison / Initialize MKTME memory
@dst is normal memory.
@src in normal memory. Does not increment. (Copy same line to all
targets)
@count (to clear/init multiple lines)
2) Submit command(s) to new devices
@dst is a special MMIO region for a device. Does not increment.
@src is normal memory. Increments.
@count usually is 1, but can be multiple.
3) Copy to iomem in big chunks
@dst is iomem and increments
@src in normal memory and increments
@count is number of chunks to copy
Add support for case #2 to support device that will accept commands via
this instruction. We provide a @count in order to submit a batch of
preprogrammed descriptors in virtually contiguous memory. This
allows the caller to submit multiple descriptors to a device with a single
submission. The special device requires the entire 64bytes descriptor to
be written atomically and will accept MOVDIR64B instruction.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/157965022175.73301.10174614665472962675.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
This removes all the remaining (dead at this point) MPX handling
code remaining in the tree. The only remaining code is the XSAVE
support for MPX state which is currently needd for KVM to handle
VMs which might use MPX.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
arch_bprm_mm_init() is used at execve() time. The only non-stub
implementation is on x86 for MPX. Remove the hook entirely from
all architectures and generic code.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
These functions are not used anywhere so drop them completely.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no user for this function so we can drop it from the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no users for these so we can remove them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no implementation for that anymore so drop the prototype.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no existing users for this functionality so drop it from the
driver completely. This also means we don't need to keep the struct
intel_scu_ipc_pdata_t around anymore so remove that as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add feature-specific helpers for querying guest CPUID support from the
emulator instead of having the emulator do a full CPUID and perform its
own bit tests. The primary motivation is to eliminate the emulator's
usage of bit() so that future patches can add more extensive build-time
assertions on the usage of bit() without having to expose yet more code
to the emulator.
Note, providing a generic guest_cpuid_has() to the emulator doesn't work
due to the existing built-time assertions in guest_cpuid_has(), which
require the feature being checked to be a compile-time constant.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ICR and TSCDEADLINE MSRs write cause the main MSRs write vmexits in our
product observation, multicast IPIs are not as common as unicast IPI like
RESCHEDULE_VECTOR and CALL_FUNCTION_SINGLE_VECTOR etc.
This patch introduce a mechanism to handle certain performance-critical
WRMSRs in a very early stage of KVM VMExit handler.
This mechanism is specifically used for accelerating writes to x2APIC ICR
that attempt to send a virtual IPI with physical destination-mode, fixed
delivery-mode and single target. Which was found as one of the main causes
of VMExits for Linux workloads.
The reason this mechanism significantly reduce the latency of such virtual
IPIs is by sending the physical IPI to the target vCPU in a very early stage
of KVM VMExit handler, before host interrupts are enabled and before expensive
operations such as reacquiring KVM’s SRCU lock.
Latency is reduced even more when KVM is able to use APICv posted-interrupt
mechanism (which allows to deliver the virtual IPI directly to target vCPU
without the need to kick it to host).
Testing on Xeon Skylake server:
The virtual IPI latency from sender send to receiver receive reduces
more than 200+ cpu cycles.
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We carry a quirk in the x86 EFI code to switch back to an older
method of mapping the EFI runtime services memory regions, because
it was deemed risky at the time to implement a new method without
providing a fallback to the old method in case problems arose.
Such problems did arise, but they appear to be limited to SGI UV1
machines, and so these are the only ones for which the fallback gets
enabled automatically (via a DMI quirk). The fallback can be enabled
manually as well, by passing efi=old_map, but there is very little
evidence that suggests that this is something that is being relied
upon in the field.
Given that UV1 support is not enabled by default by the distros
(Ubuntu, Fedora), there is no point in carrying this fallback code
all the time if there are no other users. So let's move it into the
UV support code, and document that efi=old_map now requires this
support code to be enabled.
Note that efi=old_map has been used in the past on other SGI UV
machines to work around kernel regressions in production, so we
keep the option to enable it by hand, but only if the kernel was
built with UV support.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-8-ardb@kernel.org
Reshuffle the x86 stub code a bit so that we can tag the efi_is_64bit()
function with the 'const' attribute, which permits the compiler to
optimize away any redundant calls. Since we have two different entry
points for 32 and 64 bit firmware in the startup code, this also
simplifies the C code since we'll enter it with the efi_is64 variable
already set.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-2-ardb@kernel.org
That bit is documented in TLFS 5.0c as follows:
Setting the polling bit will have the effect of unmasking an
interrupt source, except that an actual interrupt is not generated.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20191222233404.1629-1-wei.liu@kernel.org
Add support for a new version of the Load Store unit bank type as
indicated by its McaType value, which will be present in future SMCA
systems.
Add the new (HWID, MCATYPE) tuple. Reuse the same name, since this is
logically the same to the user.
Also, add the new error descriptions to edac_mce_amd.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-2-Yazen.Ghannam@amd.com
To support time namespaces in the VDSO with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.
The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide VDSO data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the VDSO data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
Allocate the time namespace page among VVAR pages and place vdso_data on
it. Provide __arch_get_timens_vdso_data() helper for VDSO code to get the
code-relative position of VVARs on that special page.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-23-dima@arista.com
VDSO support for time namespaces needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page has vdso_data->seq set to 1 to enforce
the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce
the time namespace handling path.
To prepare the time namespace page the kernel needs to know the vdso_data
offset. Provide arch_get_vdso_data() helper for locating vdso_data on VVAR
page.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-22-dima@arista.com
VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.
Remove unused VDSO_HAS_32BIT_FALLBACK from x86 vdso.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-9-vincenzo.frascino@arm.com
Provide stubs for perf_guest_get_msrs() and intel_pt_handle_vmx() when
building without support for Intel CPUs, i.e. CPU_SUP_INTEL=n. Lack of
stubs is not currently a problem as the only user, KVM_INTEL, takes a
dependency on CPU_SUP_INTEL=y. Provide the stubs for all CPUs so that
KVM_INTEL can be built for any CPU with compatible hardware support,
e.g. Centuar and Zhaoxin CPUs.
Note, the existing stub for perf_guest_get_msrs() is essentially dead
code as KVM selects CONFIG_PERF_EVENTS, i.e. the only user guarantees
the full implementation is built.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-19-sean.j.christopherson@intel.com
Define the VMCS execution control flags (consumed by KVM) using their
associated VMX_FEATURE_* to provide a strong hint that new VMX features
are expected to be added to VMX_FEATURE and considered for reporting via
/proc/cpuinfo.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-18-sean.j.christopherson@intel.com
Add a new feature flag, X86_FEATURE_MSR_IA32_FEAT_CTL, to track whether
IA32_FEAT_CTL has been initialized. This will allow KVM, and any future
subsystems that depend on IA32_FEAT_CTL, to rely purely on cpufeatures
to query platform support, e.g. allows a future patch to remove KVM's
manual IA32_FEAT_CTL MSR checks.
Various features (on platforms that support IA32_FEAT_CTL) are dependent
on IA32_FEAT_CTL being configured and locked, e.g. VMX and LMCE. The
MSR is always configured during boot, but only if the CPU vendor is
recognized by the kernel. Because CPUID doesn't incorporate the current
IA32_FEAT_CTL value in its reporting of relevant features, it's possible
for a feature to be reported as supported in cpufeatures but not truly
enabled, e.g. if the CPU supports VMX but the kernel doesn't recognize
the CPU.
As a result, without the flag, KVM would see VMX as supported even if
IA32_FEAT_CTL hasn't been initialized, and so would need to manually
read the MSR and check the various enabling bits to avoid taking an
unexpected #GP on VMXON.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-14-sean.j.christopherson@intel.com
Add an entry in struct cpuinfo_x86 to track VMX capabilities and fill
the capabilities during IA32_FEAT_CTL MSR initialization.
Make the VMX capabilities dependent on IA32_FEAT_CTL and
X86_FEATURE_NAMES so as to avoid unnecessary overhead on CPUs that can't
possibly support VMX, or when /proc/cpuinfo is not available.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-11-sean.j.christopherson@intel.com
Add a VMX-specific variant of X86_FEATURE_* flags, which will eventually
supplant the synthetic VMX flags defined in cpufeatures word 8. Use the
Intel-defined layouts for the major VMX execution controls so that their
word entries can be directly populated from their respective MSRs, and
so that the VMX_FEATURE_* flags can be used to define the existing bit
definitions in asm/vmx.h, i.e. force developers to define a VMX_FEATURE
flag when adding support for a new hardware feature.
The majority of Intel's (and compatible CPU's) VMX capabilities are
enumerated via MSRs and not CPUID, i.e. querying /proc/cpuinfo doesn't
naturally provide any insight into the virtualization capabilities of
VMX enabled CPUs. Commit
e38e05a858 ("x86: extended "flags" to show virtualization HW feature
in /proc/cpuinfo")
attempted to address the issue by synthesizing select VMX features into
a Linux-defined word in cpufeatures.
Lack of reporting of VMX capabilities via /proc/cpuinfo is problematic
because there is no sane way for a user to query the capabilities of
their platform, e.g. when trying to find a platform to test a feature or
debug an issue that has a hardware dependency. Lack of reporting is
especially problematic when the user isn't familiar with VMX, e.g. the
format of the MSRs is non-standard, existence of some MSRs is reported
by bits in other MSRs, several "features" from KVM's point of view are
enumerated as 3+ distinct features by hardware, etc...
The synthetic cpufeatures approach has several flaws:
- The set of synthesized VMX flags has become extremely stale with
respect to the full set of VMX features, e.g. only one new flag
(EPT A/D) has been added in the the decade since the introduction of
the synthetic VMX features. Failure to keep the VMX flags up to
date is likely due to the lack of a mechanism that forces developers
to consider whether or not a new feature is worth reporting.
- The synthetic flags may incorrectly be misinterpreted as affecting
kernel behavior, i.e. KVM, the kernel's sole consumer of VMX,
completely ignores the synthetic flags.
- New CPU vendors that support VMX have duplicated the hideous code
that propagates VMX features from MSRs to cpufeatures. Bringing the
synthetic VMX flags up to date would exacerbate the copy+paste
trainwreck.
Define separate VMX_FEATURE flags to set the stage for enumerating VMX
capabilities outside of the cpu_has() framework, and for adding
functional usage of VMX_FEATURE_* to help ensure the features reported
via /proc/cpuinfo is up to date with respect to kernel recognition of
VMX capabilities.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-10-sean.j.christopherson@intel.com
As pointed out by Boris, the defines for bits in IA32_FEATURE_CONTROL
are quite a mouthful, especially the VMX bits which must differentiate
between enabling VMX inside and outside SMX (TXT) operation. Rename the
MSR and its bit defines to abbreviate FEATURE_CONTROL as FEAT_CTL to
make them a little friendlier on the eyes.
Arguably, the MSR itself should keep the full IA32_FEATURE_CONTROL name
to match Intel's SDM, but a future patch will add a dedicated Kconfig,
file and functions for the MSR. Using the full name for those assets is
rather unwieldy, so bite the bullet and use IA32_FEAT_CTL so that its
nomenclature is consistent throughout the kernel.
Opportunistically, fix a few other annoyances with the defines:
- Relocate the bit defines so that they immediately follow the MSR
define, e.g. aren't mistaken as belonging to MISC_FEATURE_CONTROL.
- Add whitespace around the block of feature control defines to make
it clear they're all related.
- Use BIT() instead of manually encoding the bit shift.
- Use "VMX" instead of "VMXON" to match the SDM.
- Append "_ENABLED" to the LMCE (Local Machine Check Exception) bit to
be consistent with the kernel's verbiage used for all other feature
control bits. Note, the SDM refers to the LMCE bit as LMCE_ON,
likely to differentiate it from IA32_MCG_EXT_CTL.LMCE_EN. Ignore
the (literal) one-off usage of _ON, the SDM is simply "wrong".
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-2-sean.j.christopherson@intel.com
Commit
fa92c58694 ("x86, mce: Support memory error recovery for both UCNA
and Deferred error in machine_check_poll")
added handling of UCNA and Deferred errors by adding them to the ring
for SRAO errors.
Later, commit
fd4cf79fcc ("x86/mce: Remove the MCE ring for Action Optional errors")
switched storage from the SRAO ring to the unified pool that is still
in use today. In order to only act on the intended errors, a filter
for MCE_AO_SEVERITY is used -- effectively removing handling of
UCNA/Deferred errors again.
Extend the severity filter to include UCNA/Deferred errors again.
Also, generalize the naming of the notifier from SRAO to UC to capture
the extended scope.
Note, that this change may cause a message like the following to appear,
as the same address may be reported as SRAO and as UCNA:
Memory failure: 0x5fe3284: already hardware poisoned
Technically, this is a return to previous behavior.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200103150722.20313-2-jschoenh@amazon.de
First, printk() is NMI-context safe now since the safe printk() has been
implemented and it already has an irq_work to make NMI-context safe.
Second, this NMI irq_work actually does not work if a NMI handler causes
panic by watchdog timeout. It has no chance to run in such case, while
the safe printk() will flush its per-cpu buffers before panicking.
While at it, repurpose the irq_work callback into a function which
concentrates the NMI duration checking and makes the code easier to
follow.
[ bp: Massage. ]
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200111125427.15662-1-changbin.du@gmail.com
Add an option to disable the busmaster bit in the control register on
all PCI bridges before calling ExitBootServices() and passing control
to the runtime kernel. System firmware may configure the IOMMU to prevent
malicious PCI devices from being able to attack the OS via DMA. However,
since firmware can't guarantee that the OS is IOMMU-aware, it will tear
down IOMMU configuration when ExitBootServices() is called. This leaves
a window between where a hostile device could still cause damage before
Linux configures the IOMMU again.
If CONFIG_EFI_DISABLE_PCI_DMA is enabled or "efi=disable_early_pci_dma"
is passed on the command line, the EFI stub will clear the busmaster bit
on all PCI bridges before ExitBootServices() is called. This will
prevent any malicious PCI devices from being able to perform DMA until
the kernel reenables busmastering after configuring the IOMMU.
This option may cause failures with some poorly behaved hardware and
should not be enabled without testing. The kernel commandline options
"efi=disable_early_pci_dma" or "efi=no_disable_early_pci_dma" may be
used to override the default. Note that PCI devices downstream from PCI
bridges are disconnected from their drivers first, using the UEFI
driver model API, so that DMA can be disabled safely at the bridge
level.
[ardb: disconnect PCI I/O handles first, as suggested by Arvind]
Co-developed-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <matthewgarrett@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-18-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce the ability to define macros to perform argument translation
for the calls that need it, and define them for the boot services that
we currently use.
When calling 32-bit firmware methods in mixed mode, all output
parameters that are 32-bit according to the firmware, but 64-bit in the
kernel (ie OUT UINTN * or OUT VOID **) must be initialized in the
kernel, or the upper 32 bits may contain garbage. Define macros that
zero out the upper 32 bits of the output before invoking the firmware
method.
When a 32-bit EFI call takes 64-bit arguments, the mixed-mode call must
push the two 32-bit halves as separate arguments onto the stack. This
can be achieved by splitting the argument into its two halves when
calling the assembler thunk. Define a macro to do this for the
free_pages boot service.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-17-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86 we need to thunk through assembler stubs to call the EFI services
for mixed mode, and for runtime services in 64-bit mode. The assembler
stubs have limits on how many arguments it handles. Introduce a few
macros to check that we do not try to pass too many arguments to the
stubs.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-16-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Calling 32-bit EFI runtime services from a 64-bit OS involves
switching back to the flat mapping with a stack carved out of
memory that is 32-bit addressable.
There is no need to actually execute the 64-bit part of this
routine from the flat mapping as well, as long as the entry
and return address fit in 32 bits. There is also no need to
preserve part of the calling context in global variables: we
can simply push the old stack pointer value to the new stack,
and keep the return address from the code32 section in EBX.
While at it, move the conditional check whether to invoke
the mixed mode version of SetVirtualAddressMap() into the
64-bit implementation of the wrapper routine.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-11-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The variadic efi_call_phys() wrapper that exists on i386 was
originally created to call into any EFI firmware runtime service,
but in practice, we only use it once, to call SetVirtualAddressMap()
during early boot.
The flexibility provided by the variadic nature also makes it
type unsafe, and makes the assembler code more complicated than
needed, since it has to deal with an unknown number of arguments
living on the stack.
So clean this up, by renaming the helper to efi_call_svam(), and
dropping the unneeded complexity. Let's also drop the reference
to the efi_phys struct and grab the address from the EFI system
table directly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-9-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Split the phys_efi_set_virtual_address_map() routine into 32 and 64 bit
versions, so we can simplify them individually in subsequent patches.
There is very little overlap between the logic anyway, and this has
already been factored out in prolog/epilog routines which are completely
different between 32 bit and 64 bit. So let's take it one step further,
and get rid of the overlap completely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-8-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All EFI firmware call prototypes have been annotated as __efiapi,
permitting us to attach attributes regarding the calling convention
by overriding __efiapi to an architecture specific value.
On 32-bit x86, EFI firmware calls use the plain calling convention
where all arguments are passed via the stack, and cleaned up by the
caller. Let's add this to the __efiapi definition so we no longer
need to cast the function pointers before invoking them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-6-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit a8147dba75 ("efi/x86: Rename efi_is_native() to efi_is_mixed()")
renamed and refactored efi_is_native() into efi_is_mixed(), but failed
to take into account that these are not diametrical opposites.
Mixed mode is a construct that permits 64-bit kernels to boot on 32-bit
firmware, but there is another non-native combination which is supported,
i.e., 32-bit kernels booting on 64-bit firmware, but only for boot and not
for runtime services. Also, mixed mode can be disabled in Kconfig, in
which case the 64-bit kernel can still be booted from 32-bit firmware,
but without access to runtime services.
Due to this oversight, efi_runtime_supported() now incorrectly returns
true for such configurations, resulting in crashes at boot. So fix this
by making efi_runtime_supported() aware of this.
As a side effect, some efi_thunk_xxx() stubs have become obsolete, so
remove them as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
While here, drop initialized but unused ssram_base_addr and ssram_size members.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
force_iret() was originally intended to prevent the return to user mode with
the SYSRET or SYSEXIT instructions, in cases where the register state could
have been changed to be incompatible with those instructions. The entry code
has been significantly reworked since then, and register state is validated
before SYSRET or SYSEXIT are used. force_iret() no longer serves its original
purpose and can be eliminated.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20191219115812.102620-1-brgerst@gmail.com
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mis-spelling is found by checkpatch.pl, so fix them.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the NMI-window exiting related definitions to match the latest
Intel SDM. No functional changes.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename interrupt-windown exiting related definitions to match the
latest Intel SDM. No functional changes.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We were using either APIC_DEST_PHYSICAL|APIC_DEST_LOGICAL or 0|1 to
fill in kvm_lapic_irq.dest_mode. It's fine only because in most cases
when we check against dest_mode it's against APIC_DEST_PHYSICAL (which
equals to 0). However, that's not consistent. We'll have problem
when we want to start checking against APIC_DEST_LOGICAL, which does
not equals to 1.
This patch firstly introduces kvm_lapic_irq_dest_mode() helper to take
any boolean of destination mode and return the APIC_DEST_* macro.
Then, it replaces the 0|1 settings of irq.dest_mode with the helper.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>From the Intel Optimization Reference Manual:
3.7.6.1 Fast Short REP MOVSB
Beginning with processors based on Ice Lake Client microarchitecture,
REP MOVSB performance of short operations is enhanced. The enhancement
applies to string lengths between 1 and 128 bytes long. Support for
fast-short REP MOVSB is enumerated by the CPUID feature flag: CPUID
[EAX=7H, ECX=0H).EDX.FAST_SHORT_REP_MOVSB[bit 4] = 1. There is no change
in the REP STOS performance.
Add an X86_FEATURE_FSRM flag for this.
memmove() avoids REP MOVSB for short (< 32 byte) copies. Check FSRM and
use REP MOVSB for short copies on systems that support it.
[ bp: Massage and add comment. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191216214254.26492-1-tony.luck@intel.com
In order to avoid needless #ifdef CONFIG_COMPAT checks,
move the compat_ptr() definition to linux/compat.h
where it can be seen by any file regardless of the
architecture.
Only s390 needs a special definition, this can use the
self-#define trick we have elsewhere.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It was never really used, see
117cc7a908 ("x86/retpoline: Fill return stack buffer on vmexit")
[ bp: Massage. ]
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191226204512.24524-1-asteinhauser@google.com
Split __die() into __die_header() and __die_body(). This allows inserting
extra information below the header line that initiates the bug report.
Introduce a new function die_addr() that behaves like die(), but is for
faults only and uses __die_header() and __die_body() so that a future
commit can print extra information after the header line.
[ bp: Comment the KASAN-specific usage of gp_addr. ]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191218231150.12139-3-jannh@google.com
To support evaluating 64-bit kernel mode instructions:
* Replace existing checks for user_64bit_mode() with a new helper that
checks whether code is being executed in either 64-bit kernel mode or
64-bit user mode.
* Select the GS base depending on whether the instruction is being
evaluated in kernel mode.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191218231150.12139-1-jannh@google.com
The macros efi_call_early and efi_call_runtime are used to call EFI
boot services and runtime services, respectively. However, the naming
is confusing, given that the early vs runtime distinction may suggest
that these are used for calling the same set of services either early
or late (== at runtime), while in reality, the sets of services they
can be used with are completely disjoint, and efi_call_runtime is also
only usable in 'early' code.
So do a global sweep to replace all occurrences with efi_bs_call or
efi_rt_call, respectively, where BS and RT match the idiom used by
the UEFI spec to refer to boot time or runtime services.
While at it, use 'func' as the macro parameter name for the function
pointers, which is less likely to collide and cause weird build errors.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-24-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
None of the definitions of the efi_table_attr() still refer to
their 'table' argument so let's get rid of it entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-23-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After refactoring the mixed mode support code, efi_call_proto()
no longer uses its protocol argument in any of its implementation,
so let's remove it altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-22-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The various pointers we stash in the efi_config struct which we
retrieve using __efi_early() are simply copies of the ones in
the EFI system table, which we have started accessing directly
in the previous patch. So drop all the __efi_early() related
plumbing, as well as all the assembly code dealing with efi_config,
which allows us to move the PE/COFF entry point to C code as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-18-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We use special wrapper routines to invoke firmware services in the
native case as well as the mixed mode case. For mixed mode, the need
is obvious, but for the native cases, we can simply rely on the
compiler to generate the indirect call, given that GCC now has
support for the MS calling convention (and has had it for quite some
time now). Note that on i386, the decompressor and the EFI stub are not
built with -mregparm=3 like the rest of the i386 kernel, so we can
safely allow the compiler to emit the indirect calls here as well.
So drop all the wrappers and indirection, and switch to either native
calls, or direct calls into the thunk routine for mixed mode.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-14-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, we support mixed mode by casting all boot time firmware
calls to 64-bit explicitly on native 64-bit systems, and to 32-bit
on 32-bit systems or 64-bit systems running with 32-bit firmware.
Due to this explicit awareness of the bitness in the code, we do a
lot of casting even on generic code that is shared with other
architectures, where mixed mode does not even exist. This casting
leads to loss of coverage of type checking by the compiler, which
we should try to avoid.
So instead of distinguishing between 32-bit vs 64-bit, distinguish
between native vs mixed, and limit all the nasty casting and
pointer mangling to the code that actually deals with mixed mode.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-10-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ARM architecture does not permit combining 32-bit and 64-bit code
at the same privilege level, and so EFI mixed mode is strictly a x86
concept.
In preparation of turning the 32/64 bit distinction in shared stub
code to a native vs mixed one, refactor x86's current use of the
helper function efi_is_native() into efi_is_mixed().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The macro __efi_call_early() is defined by various architectures but
never used. Let's get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-6-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Japser Lake is an Atom family processor.
It uses Tremont cores and is targeted at mobile platforms.
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the comment for 'struct real_mode_header' to reference the correct
assembly file, realmode/rm/header.S. The comment has always incorrectly
referenced realmode.S, which doesn't exist, as defining the associated
asm blob.
Specify the file's path relative to arch/x86 to avoid confusion with
boot/header.S. Update the comment for 'struct trampoline_header' to
also include the relative path to keep things consistent, and tweak the
dual 64/32 reference so that it doesn't appear to be an extension of the
relative path, i.e. avoid "realmode/rm/trampoline_32/64.S".
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191126195911.3429-1-sean.j.christopherson@intel.com
When building with C=1 W=1 (and when CONFIG_MICROCODE_AMD=n, as Luc Van
Oostenryck correctly points out) both sparse and gcc complain:
CHECK arch/x86/kernel/cpu/microcode/core.c
./arch/x86/include/asm/microcode_amd.h:56:6: warning: symbol \
'reload_ucode_amd' was not declared. Should it be static?
CC arch/x86/kernel/cpu/microcode/core.o
In file included from arch/x86/kernel/cpu/microcode/core.c:36:
./arch/x86/include/asm/microcode_amd.h:56:6: warning: no previous \
prototype for 'reload_ucode_amd' [-Wmissing-prototypes]
56 | void reload_ucode_amd(void) {}
| ^~~~~~~~~~~~~~~~
And they're right - that function can be a static inline like its
brethren.
Signed-off-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/52170.1575603873@turing-police
The crypto glue performed function prototype casting via macros to make
indirect calls to assembly routines. Instead of performing casts at the
call sites (which trips Control Flow Integrity prototype checking), switch
each prototype to a common standard set of arguments which allows the
removal of the existing macros. In order to keep pointer math unchanged,
internal casting between u128 pointers and u8 pointers is added.
Co-developed-by: João Moreira <joao.moreira@intel.com>
Signed-off-by: João Moreira <joao.moreira@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the definition of acpi_get_wakeup_address() into sleep.c to break
linux/acpi.h's dependency (by way of asm/acpi.h) on asm/realmode.h.
Everyone and their mother includes linux/acpi.h, i.e. modifying
realmode.h results in a full kernel rebuild, which makes the already
inscrutable real mode boot code even more difficult to understand and is
positively rage inducing when trying to make changes to x86's boot flow.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/r/20191126165417.22423-13-sean.j.christopherson@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Convert acpi_wakeup_address from a raw variable into a function so that
x86 can wrap its dereference of the real mode boot header in a function
instead of broadcasting it to the world via a #define. This sets the
stage for a future patch to move x86's definition of the new function,
acpi_get_wakeup_address(), out of asm/acpi.h and thus break acpi.h's
dependency on asm/realmode.h.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/r/20191126165417.22423-12-sean.j.christopherson@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Untangle the somewhat incestous way of how VMALLOC_START is used all across the
kernel, but is, on x86, defined deep inside one of the lowest level page table headers.
It doesn't help that vmalloc.h only includes a single asm header:
#include <asm/page.h> /* pgprot_t */
So there was no existing cross-arch way to decouple address layout
definitions from page.h details. I used this:
#ifndef VMALLOC_START
# include <asm/vmalloc.h>
#endif
This way every architecture that wants to simplify page.h can do so.
- Also on x86 we had a couple of LDT related inline functions that used
the late-stage address space layout positions - but these could be
uninlined without real trouble - the end result is cleaner this way as
well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the x86 MM code we'd like to untangle various types of historic
header dependency spaghetti, but for this we'd need to pass to
the generic vmalloc code various vmalloc related defines that
customarily come via the <asm/page.h> low level arch header.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I got lost in trying to figure out which bits were enabled
in one of the PTE masks, so let's make it pretty
obvious at the definition site already:
#define PAGE_NONE __pg( 0| 0| 0|___A| 0| 0| 0|___G)
#define PAGE_SHARED __pg(__PP|__RW|_USR|___A|__NX| 0| 0| 0)
#define PAGE_SHARED_EXEC __pg(__PP|__RW|_USR|___A| 0| 0| 0| 0)
#define PAGE_COPY_NOEXEC __pg(__PP| 0|_USR|___A|__NX| 0| 0| 0)
#define PAGE_COPY_EXEC __pg(__PP| 0|_USR|___A| 0| 0| 0| 0)
#define PAGE_COPY __pg(__PP| 0|_USR|___A|__NX| 0| 0| 0)
#define PAGE_READONLY __pg(__PP| 0|_USR|___A|__NX| 0| 0| 0)
#define PAGE_READONLY_EXEC __pg(__PP| 0|_USR|___A| 0| 0| 0| 0)
#define __PAGE_KERNEL (__PP|__RW| 0|___A|__NX|___D| 0|___G)
#define __PAGE_KERNEL_EXEC (__PP|__RW| 0|___A| 0|___D| 0|___G)
#define _KERNPG_TABLE_NOENC (__PP|__RW| 0|___A| 0|___D| 0| 0)
#define _KERNPG_TABLE (__PP|__RW| 0|___A| 0|___D| 0| 0| _ENC)
#define _PAGE_TABLE_NOENC (__PP|__RW|_USR|___A| 0|___D| 0| 0)
#define _PAGE_TABLE (__PP|__RW|_USR|___A| 0|___D| 0| 0| _ENC)
#define __PAGE_KERNEL_RO (__PP| 0| 0|___A|__NX|___D| 0|___G)
#define __PAGE_KERNEL_RX (__PP| 0| 0|___A| 0|___D| 0|___G)
#define __PAGE_KERNEL_NOCACHE (__PP|__RW| 0|___A|__NX|___D| 0|___G| __NC)
#define __PAGE_KERNEL_VVAR (__PP| 0|_USR|___A|__NX|___D| 0|___G)
#define __PAGE_KERNEL_LARGE (__PP|__RW| 0|___A|__NX|___D|_PSE|___G)
#define __PAGE_KERNEL_LARGE_EXEC (__PP|__RW| 0|___A| 0|___D|_PSE|___G)
#define __PAGE_KERNEL_WP (__PP|__RW| 0|___A|__NX|___D| 0|___G| __WP)
Especially security relevant bits like 'NX' or coherence related bits like 'G'
are now super easy to read based on a single grep.
We do the underscore gymnastics to not pollute the kernel's symbol namespace,
and the longest line still fits into 80 columns, so this should be readable
for everyone.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Half of the declarations have an 'extern', half of them not,
use 'extern' consistently.
This makes grepping for APIs easier, such as:
dagon:~/tip> git grep -E '\<memtype_.*\(' arch/x86/ | grep extern
arch/x86/include/asm/memtype.h:extern int memtype_reserve(u64 start, u64 end,
arch/x86/include/asm/memtype.h:extern int memtype_free(u64 start, u64 end);
arch/x86/include/asm/memtype.h:extern int memtype_kernel_map_sync(u64 base, unsigned long size,
arch/x86/include/asm/memtype.h:extern int memtype_reserve_io(resource_size_t start, resource_size_t end,
arch/x86/include/asm/memtype.h:extern void memtype_free_io(resource_size_t start, resource_size_t end);
arch/x86/mm/pat/memtype.h:extern int memtype_check_insert(struct memtype *entry_new,
arch/x86/mm/pat/memtype.h:extern struct memtype *memtype_erase(u64 start, u64 end);
arch/x86/mm/pat/memtype.h:extern struct memtype *memtype_lookup(u64 addr);
arch/x86/mm/pat/memtype.h:extern int memtype_copy_nth_element(struct memtype *entry_out, loff_t pos);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pat.h is a file whose main purpose is to provide the memtype_*() APIs.
PAT is the low level hardware mechanism - but the high level abstraction
is memtype.
So name the header <memtype.h> as well - this goes hand in hand with memtype.c
and memtype_interval.c.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Right now we have these four types of PAT-disabled boot messages:
x86/PAT: PAT support disabled.
x86/PAT: PAT MSR is 0, disabled.
x86/PAT: MTRRs disabled, skipping PAT initialization too.
x86/PAT: PAT not supported by CPU.
The first message is ambiguous in that it doesn't signal that PAT is off
due to a boot option.
The second message doesn't really make it clear that this is the MSR value
during early bootup and it's the firmware environment that disabled PAT
support.
The fourth message doesn't really make it clear that we disable PAT support
because CONFIG_MTRR is off in the kernel.
Clarify, harmonize and fix the spelling in these user-visible messages:
x86/PAT: PAT support disabled via boot option.
x86/PAT: PAT support disabled by the firmware.
x86/PAT: PAT support disabled because CONFIG_MTRR is disabled in the kernel.
x86/PAT: PAT not supported by the CPU.
Also add a fifth message, in case PAT support is disabled at build time:
x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel.
Previously we'd just silently return from pat_init() without giving any indication
that PAT support is off.
Finally, clarify/extend some of the comments related to PAT initialization.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few commits splitting the KASAN instrumented bitops header in
three, to match the split of the asm-generic bitops headers.
This is needed on powerpc because we use asm-generic/bitops/non-atomic.h,
for the non-atomic bitops, whereas the existing KASAN instrumented
bitops assume all the underlying operations are provided by the arch
as arch_foo() versions.
Thanks to:
Daniel Axtens & Christophe Leroy.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl3qN0wTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLWFD/4/e3CO1oWjQdDGjgvhydhmhjMQqI9m
EINQjg3hl0ceig1HzsgjVdWI4TOf7bXbaQRf8m2pFWpA+iSx4KpjlnXzNjfUDapO
JqzKYfVSdi0o6OAFigDYuN1V5F2jAgrM7/w5PKpVuiAABcgJNcEY59tgEMTdj9r0
9H3OekYv0UnZ5ZNsUhCibKVvVLdbtys3ALrm1YETAauCkY/lpNk6afcr33t0iw2l
WAdd2sfWvw4tBn+35ZrNnv7z4hQ423Imd+lyuI5zhMBOOGspgMxlGGeIn370WyAi
00Jl66TRot6EtWGDVzV10bjB53qDhHrtNIk0NG2QMBB8vdTjBMtXfJnVc3Q8iVZ9
GkpdvMLNAlmxa4AuzpdHAOUQK48aggQzDmJkGp/JdYT6+WwTa5SLZcsy+njHGyjU
It+728FnStilM1XvjnaN9pljqANEcN4/YIycK55XGDsZS9fVRMY/QMAQZbdLHfzc
nB54Q/8vtPc9H69ws3U3g0ogVtYi5ca5RpTPiYU6WUQfEe9mjZdEgglsHC1y8ef2
9J3Muv4ASDGLjKN+G4dvKLCIgF+QKtsvwrtSztQq6wVnXUxuUQBEQSCaMPN9PN5g
Hlkjk95WevXcHyXeE2r8cXndUTboIgWRMZp0AHao44du3EziPMCvE0tFAHOEWfV0
8Oty9Fo5QSb1Mw==
=FCVX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"A few commits splitting the KASAN instrumented bitops header in three,
to match the split of the asm-generic bitops headers.
This is needed on powerpc because we use the generic bitops for the
non-atomic case only, whereas the existing KASAN instrumented bitops
assume all the underlying operations are provided by the arch as
arch_foo() versions.
Thanks to: Daniel Axtens & Christophe Leroy"
* tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs/core-api: Remove possibly confusing sub-headings from Bit Operations
powerpc: support KASAN instrumentation of bitops
kasan: support instrumented bitops combined with generic bitops
Including:
- Conversion of the AMD IOMMU driver to use the dma-iommu code
for imlementing the DMA-API. This gets rid of quite some code
in the driver itself, but also has some potential for
regressions (non are known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845
SoC. This also includes some firmware interface changes, but
those are acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per
domain in the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush
interface of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support
future hardware.
-----BEGIN PGP SIGNATURE-----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=ntaE
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Conversion of the AMD IOMMU driver to use the dma-iommu code for
imlementing the DMA-API. This gets rid of quite some code in the
driver itself, but also has some potential for regressions (non are
known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
This also includes some firmware interface changes, but those are
acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per domain in
the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush interface
of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support future
hardware.
* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
iommu/rockchip: Don't provoke WARN for harmless IRQs
iommu/vt-d: Turn off translations at shutdown
iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
iommu/arm-smmu: Remove duplicate error message
iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
iommu/ipmmu-vmsa: Add utlb_offset_base
iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
iommu/ipmmu-vmsa: tidyup register definitions
iommu/ipmmu-vmsa: Remove all unused register definitions
iommu/mediatek: Reduce the tlb flush timeout value
iommu/mediatek: Get rid of the pgtlock
iommu/mediatek: Move the tlb_sync into tlb_flush
iommu/mediatek: Delete the leaf in the tlb_flush
iommu/mediatek: Use gather to achieve the tlb range flush
iommu/mediatek: Add a new tlb_lock for tlb_flush
iommu/mediatek: Correct the flush_iotlb_all callback
iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
iommu/io-pgtable-arm: Rationalise MAIR handling
...
Pull x86 fixes from Ingo Molnar:
"Various fixes:
- Fix the PAT performance regression that downgraded write-combining
device memory regions to uncached.
- There's been a number of bugs in 32-bit double fault handling -
hopefully all fixed now.
- Fix an LDT crash
- Fix an FPU over-optimization that broke with GCC9 code
optimizations.
- Misc cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Fix off-by-one bugs in interval tree search
x86/ioperm: Save an indentation level in tss_update_io_bitmap()
x86/fpu: Don't cache access to fpu_fpregs_owner_ctx
x86/entry/32: Remove unused 'restore_all_notrace' local label
x86/ptrace: Document FSBASE and GSBASE ABI oddities
x86/ptrace: Remove set_segment_reg() implementations for current
x86/traps: die() instead of panicking on a double fault
x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit
x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area
x86/doublefault/32: Rename doublefault.c to doublefault_32.c
x86/traps: Disentangle the 32-bit and 64-bit doublefault code
lkdtm: Add a DOUBLE_FAULT crash type on x86
selftests/x86/single_step_syscall: Check SYSENTER directly
x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()
Pull perf fixes from Ingo Molnar:
- Make /sys/devices/cpu/rdpmc based RDPMC enforcement more
instantaneous
- decoder: Update the Intel opcode map
- Various tooling fixes, including a few late optimizations and
cleanups.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
perf script: Fix invalid LBR/binary mismatch error
perf script: Fix brstackinsn for AUXTRACE
perf affinity: Add infrastructure to save/restore affinity
perf pmu: Use file system cache to optimize sysfs access
perf regs: Make perf_reg_name() return "unknown" instead of NULL
perf diff: Use llabs() with 64-bit values
perf diff: Use llabs() with 64-bit values
perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0
perf tools: Allow to link with libbpf dynamicaly
perf tests: Rename tests/map_groups.c to tests/maps.c
perf tests: Rename thread-mg-share to thread-maps-share
perf maps: Rename map_groups.h to maps.h
perf maps: Rename 'mg' variables to 'maps'
perf map_symbol: Rename ms->mg to ms->maps
perf addr_location: Rename al->mg to al->maps
perf thread: Rename thread->mg to thread->maps
perf maps: Merge 'struct maps' with 'struct map_groups'
x86/insn: perf tools: Add some more instructions to the new instructions test
x86/insn: Add some more Intel instructions to the opcode map
perf map: Remove unused functions
...
- Hibernation support (Dexuan Cui).
- Latency testing framework (Branden Bonaby).
- Decoupling Hyper-V page size from guest page size (Himadri Pandya).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAl3f5YIACgkQ3qZv95d3
LNzBww/8Cpv/BnOs2cp56OhC+2++3YlWfmxGnvQb9h52weElgr1AZF33lAynp8BZ
YssOcDnS/G2iAkNDffbQA7s3WTwIjP1weJibOeKbtcXp4SuhNR3gnJafufNddNDv
bw8ZReLQV7hy3sHb3OUx0aJk5Mssp0N9ZpxRilyIpLELPfVp63gFebq6s1MQYljk
BAiNO4SKqsGQGZApt2F4Cc3hX2wU2ZfiDm6SifXiLYITGnvilIn7XFIht+2jJBWS
CdzRoGXcwhQhlj68XWlc89SOzJb7vVUMO1sr84psfbQ2LbhJU8lfJKRJ4b4lR07Z
Uv5FYxjr14S65fv7DkzCfWU+uPN/sObG4pPXihlfqcTraOvYLQ6/x8cw+9tGZg4H
aTtnF40hnO81aKsvPAeIsSzVkoyPaSrt7KKhk+Bw/5EUDTTNp6EbIuL4xwnKt6Rt
2UpA5HM9guQqNb6OZrjlpZfJgd9bNP4CZLBTfOukmnZpONKr2Wv3wubcwQJ8ibQc
1WZ5SfN2Wmg999Ski7j9qzHk0tWJxa6SX+2NLEHRKxy2nJSJ1zlAr//bznMyMgH/
yKPDaSkOFoy0aqiTKV2WzuOY6FGXTrSo5vq8YAgYRgp3xB+5+7zLeqlj3ipXhLYE
HH/eqB27eSnvi0jpub4TbszGJG0o4Z1aYx3aHYYqrOfWX/A5Vls=
=oJGE
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using
DMA offsets (Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code
(Nicolas Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
-----BEGIN PGP SIGNATURE-----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=e5wO
-----END PGP SIGNATURE-----
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3cKcsLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYO1CRAAwFQigsbi0CqqshPWnP0owKV+HA4Xfz/lQZsd7SM/
BVXhKyDJQum6gp73dW025HCfjidTknsbdCUIP/LNUgAnop3lOlnB31/munDnJJ1H
6hB1pc+zB9VgbOe0A6TxtxPRm5aE33k1hZIZS99lOh7mY3FvF7mbkkbVoCjdS3Cq
a9bTX+X+esfUQ5GgaIc2zmz2GLkyFXIeVGs8/CoOX58ESCWQcVZrsQRompo4SgrI
jqwf47NzdmK8hW4mZ+jdQUiWiAmNs5+2om7Bvi/deFAIFUo1/hLHvQzqEGramq/j
5SPHax2gWAN3uWYP91QISkUAJWFydwgmUDoTO1M04ov4xLuBrqIQmc43tLjHo2UT
RwMozWJWN+gkB9zTIboqMPi2qcuDaWcCij7LwHl5zLxPTcOKsrALarL55BQ8MipQ
x6fpvskrQQvlArNTsRWFRUq0mCtkzE3wMZ9RR3AIETQL2hlAzB1S4gzhD+Z6WTYY
pXNgkunonVGxwyN/7iJTEl/mvF/+MynGcWqhrwHZLqncyhn/WJJ2USH3nAD1+yjp
v8v6UUeMXIjUsGAyfTjXy/WXAfwRuSC038AAFcmWKDdh08h4XvPHRficT4U8wr34
7WzGizHP9f1CqrhYL/4exhPY9X2Yb7HhsFd0bZGG0rRvSillPUp0b8s++m12QuQU
+VY=
=ooiA
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap
Pull generic ioremap support from Christoph Hellwig:
"This adds the remaining bits for an entirely generic ioremap and
iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
mess of weird ioremap variants we had with no users outside the arch
code.
For now just the three newest ports use the code, but there is more
than a handful others that can be converted without too much work.
Summary:
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it"
* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
nds32: use generic ioremap
csky: use generic ioremap
csky: remove ioremap_cache
riscv: use the generic ioremap code
lib: provide a simple generic ioremap implementation
sh: remove __iounmap
nios2: remove __iounmap
hexagon: remove __iounmap
m68k: rename __iounmap and mark it static
arch: rely on asm-generic/io.h for default ioremap_* definitions
asm-generic: don't provide ioremap for CONFIG_MMU
asm-generic: ioremap_uc should behave the same with and without MMU
xtensa: clean up ioremap
x86: Clean up ioremap()
parisc: remove __ioremap
nios2: remove __ioremap
alpha: remove the unused __ioremap wrapper
hexagon: clean up ioremap
ia64: rename ioremap_nocache to ioremap_uc
unicore32: remove ioremap_cached
...
The state/owner of the FPU is saved to fpu_fpregs_owner_ctx by pointing
to the context that is currently loaded. It never changed during the
lifetime of a task - it remained stable/constant.
After deferred FPU registers loading until return to userland was
implemented, the content of fpu_fpregs_owner_ctx may change during
preemption and must not be cached.
This went unnoticed for some time and was now noticed, in particular
since gcc 9 is caching that load in copy_fpstate_to_sigframe() and
reusing it in the retry loop:
copy_fpstate_to_sigframe()
load fpu_fpregs_owner_ctx and save on stack
fpregs_lock()
copy_fpregs_to_sigframe() /* failed */
fpregs_unlock()
*** PREEMPTION, another uses FPU, changes fpu_fpregs_owner_ctx ***
fault_in_pages_writeable() /* succeed, retry */
fpregs_lock()
__fpregs_load_activate()
fpregs_state_valid() /* uses fpu_fpregs_owner_ctx from stack */
copy_fpregs_to_sigframe() /* succeeds, random FPU content */
This is a comparison of the assembly produced by gcc 9, without vs with this
patch:
| # arch/x86/kernel/fpu/signal.c:173: if (!access_ok(buf, size))
| cmpq %rdx, %rax # tmp183, _4
| jb .L190 #,
|-# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read_stable(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu;
|-#APP
|-# 512 "arch/x86/include/asm/fpu/internal.h" 1
|- movq %gs:fpu_fpregs_owner_ctx,%rax #, pfo_ret__
|-# 0 "" 2
|-#NO_APP
|- movq %rax, -88(%rbp) # pfo_ret__, %sfp
…
|-# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read_stable(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu;
|- movq -88(%rbp), %rcx # %sfp, pfo_ret__
|- cmpq %rcx, -64(%rbp) # pfo_ret__, %sfp
|+# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu;
|+#APP
|+# 512 "arch/x86/include/asm/fpu/internal.h" 1
|+ movq %gs:fpu_fpregs_owner_ctx(%rip),%rax # fpu_fpregs_owner_ctx, pfo_ret__
|+# 0 "" 2
|+# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu;
|+#NO_APP
|+ cmpq %rax, -64(%rbp) # pfo_ret__, %sfp
Use this_cpu_read() instead this_cpu_read_stable() to avoid caching of
fpu_fpregs_owner_ctx during preemption points.
The Fixes: tag points to the commit where deferred FPU loading was
added. Since this commit, the compiler is no longer allowed to move the
load of fpu_fpregs_owner_ctx somewhere else / outside of the locked
section. A task preemption will change its value and stale content will
be observed.
[ bp: Massage. ]
Debugged-by: Austin Clements <austin@google.com>
Debugged-by: David Chase <drchase@golang.org>
Debugged-by: Ian Lance Taylor <ian@airs.com>
Fixes: 5f409e20b7 ("x86/fpu: Defer FPU state load until return to userspace")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Aubrey Li <aubrey.li@intel.com>
Cc: Austin Clements <austin@google.com>
Cc: Barret Rhoden <brho@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Chase <drchase@golang.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: ian@airs.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Bleecher Snyder <josharian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191128085306.hxfa2o3knqtu4wfn@linutronix.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205663
- PERAMAENT flag to ftrace_ops when attaching a callback to a function
As /proc/sys/kernel/ftrace_enabled when set to zero will disable all
attached callbacks in ftrace, this has a detrimental impact on live
kernel tracing, as it disables all that it patched. If a ftrace_ops
is registered to ftrace with the PERMANENT flag set, it will prevent
ftrace_enabled from being disabled, and if ftrace_enabled is already
disabled, it will prevent a ftrace_ops with PREMANENT flag set from
being registered.
- New register_ftrace_direct(). As eBPF would like to register its own
trampolines to be called by the ftrace nop locations directly,
without going through the ftrace trampoline, this function has been
added. This allows for eBPF trampolines to live along side of
ftrace, perf, kprobe and live patching. It also utilizes the ftrace
enabled_functions file that keeps track of functions that have been
modified in the kernel, to allow for security auditing.
- Allow for kernel internal use of ftrace instances. Subsystems in
the kernel can now create and destroy their own tracing instances
which allows them to have their own tracing buffer, and be able
to record events without worrying about other users from writing over
their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency tracers.
- Wider spread use of generic compare operations for use of bsearch and
friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXdwv4BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnB5AP91vsdHQjwE1+/UWG/cO+qFtKvn2QJK
QmBRIJNH/s+1TAD/fAOhgw+ojSK3o/qc+NpvPTEW9AEwcJL1wacJUn+XbQc=
=ztql
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- New PERMANENT flag to ftrace_ops when attaching a callback to a
function.
As /proc/sys/kernel/ftrace_enabled when set to zero will disable
all attached callbacks in ftrace, this has a detrimental impact on
live kernel tracing, as it disables all that it patched. If a
ftrace_ops is registered to ftrace with the PERMANENT flag set, it
will prevent ftrace_enabled from being disabled, and if
ftrace_enabled is already disabled, it will prevent a ftrace_ops
with PREMANENT flag set from being registered.
- New register_ftrace_direct().
As eBPF would like to register its own trampolines to be called by
the ftrace nop locations directly, without going through the ftrace
trampoline, this function has been added. This allows for eBPF
trampolines to live along side of ftrace, perf, kprobe and live
patching. It also utilizes the ftrace enabled_functions file that
keeps track of functions that have been modified in the kernel, to
allow for security auditing.
- Allow for kernel internal use of ftrace instances.
Subsystems in the kernel can now create and destroy their own
tracing instances which allows them to have their own tracing
buffer, and be able to record events without worrying about other
users from writing over their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency
tracers.
- Wider spread use of generic compare operations for use of bsearch
and friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes"
* tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits)
tracing: Enable syscall optimization for MIPS
tracing: Use xarray for syscall trace events
tracing: Sample module to demonstrate kernel access to Ftrace instances.
tracing: Adding new functions for kernel access to Ftrace instances
tracing: Fix Kconfig indentation
ring-buffer: Fix typos in function ring_buffer_producer
ftrace: Use BIT() macro
ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured
ftrace: Rename ftrace_graph_stub to ftrace_stub_graph
ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization
ftrace: Add helper find_direct_entry() to consolidate code
ftrace: Add another check for match in register_ftrace_direct()
ftrace: Fix accounting bug with direct->count in register_ftrace_direct()
ftrace/selftests: Fix spelling mistake "wakeing" -> "waking"
tracing: Increase SYNTH_FIELDS_MAX for synthetic_events
ftrace/samples: Add a sample module that implements modify_ftrace_direct()
ftrace: Add modify_ftrace_direct()
tracing: Add missing "inline" in stub function of latency_fsnotify()
tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text
tracing: Use seq_buf_hex_dump() to dump buffers
...
When you successfully write 0 to /sys/devices/cpu/rdpmc, the RDPMC
instruction should be disabled unconditionally and immediately (after you
close the SYSFS file) by the documentation.
Instead, in the current implementation the PMU must be reloaded which
happens only eventually some time in the future. Only after that the RDPMC
instruction becomes disabled (on ring 3) on the respective core.
This change makes the treatment of the 0 value as blocking and as
unconditional as the current treatment of the 2 value, only the CR4.PCE
bit is naturally set to false instead of true.
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: https://lkml.kernel.org/r/20191125054838.137615-1-asteinhauser@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kprobes does something like:
register:
arch_arm_kprobe()
text_poke(INT3)
/* guarantees nothing, INT3 will become visible at some point, maybe */
kprobe_optimizer()
/* guarantees the bytes after INT3 are unused */
synchronize_rcu_tasks();
text_poke_bp(JMP32);
/* implies IPI-sync, kprobe really is enabled */
unregister:
__disarm_kprobe()
unoptimize_kprobe()
text_poke_bp(INT3 + tail);
/* implies IPI-sync, so tail is guaranteed visible */
arch_disarm_kprobe()
text_poke(old);
/* guarantees nothing, old will maybe become visible */
synchronize_rcu()
free-stuff
Now the problem is that on register, the synchronize_rcu_tasks() does
not imply sufficient to guarantee all CPUs have already observed INT3
(although in practice this is exceedingly unlikely not to have
happened) (similar to how MEMBARRIER_CMD_PRIVATE_EXPEDITED does not
imply MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE).
Worse, even if it did, we'd have to do 2 synchronize calls to provide
the guarantee we're looking for, the first to ensure INT3 is visible,
the second to guarantee nobody is then still using the instruction
bytes after INT3.
Similar on unregister; the synchronize_rcu() between
__unregister_kprobe_top() and __unregister_kprobe_bottom() does not
guarantee all CPUs are free of the INT3 (and observe the old text).
Therefore, sprinkle some IPI-sync love around. This guarantees that
all CPUs agree on the text and RCU once again provides the required
guaranteed.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132458.162172862@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the last and only user of these functions gone (ftrace) remove
them as well to avoid ever growing new users.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132457.819095320@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move ftrace over to using the generic x86 text_poke functions; this
avoids having a second/different copy of that code around.
This also avoids ftrace violating the (new) W^X rule and avoids
fragmenting the kernel text page-tables, due to no longer having to
toggle them RW.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132457.761255803@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding another text_poke_bp_batch() user made me realize the interface
is all sorts of wrong. The text poke vector should be internal to the
implementation.
This then results in a trivial interface:
text_poke_queue() - which has the 'normal' text_poke_bp() interface
text_poke_finish() - which takes no arguments and flushes any
pending text_poke()s.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132457.646280715@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Update the ACPICA code in the kernel to upstream revision 20191018
including:
* Fixes for Clang warnings (Bob Moore).
* Fix for possible overflow in get_tick_count() (Bob Moore).
* Introduction of acpi_unload_table() (Bob Moore).
* Debugger and utilities updates (Erik Schmauss).
* Fix for unloading tables loaded via configfs (Nikolaus Voss).
- Add support for EFI specific purpose memory to optionally allow
either application-exclusive or core-kernel-mm managed access to
differentiated memory (Dan Williams).
- Fix and clean up processing of the HMAT table (Brice Goglin,
Qian Cai, Tao Xu).
- Update the ACPI EC driver to make it work on systems with
hardware-reduced ACPI (Daniel Drake).
- Always build in support for the Generic Event Device (GED) to
allow one kernel binary to work both on systems with full
hardware ACPI and hardware-reduced ACPI (Arjan van de Ven).
- Fix the table unload mechanism to unregister platform devices
created when the given table was loaded (Andy Shevchenko).
- Rework the lid blacklist handling in the button driver and add
more lid quirks to it (Hans de Goede).
- Improve ACPI-based device enumeration for some platforms based
on Intel BayTrail SoCs (Hans de Goede).
- Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC
and prevent handlers from being registered for unhandled PMIC
OpRegions (Hans de Goede).
- Unify ACPI _HID/_UID matching (Andy Shevchenko).
- Clean up documentation and comments (Cao jin, James Pack, Kacper
Piwiński).
-----BEGIN PGP SIGNATURE-----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=7Cqr
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20191018, add support for EFI specific purpose memory, update the ACPI
EC driver to make it work on systems with hardware-reduced ACPI,
improve ACPI-based device enumeration for some platforms, rework the
lid blacklist handling in the button driver and add more lid quirks to
it, unify ACPI _HID/_UID matching, fix assorted issues and clean up
the code and documentation.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20191018
including:
* Fixes for Clang warnings (Bob Moore)
* Fix for possible overflow in get_tick_count() (Bob Moore)
* Introduction of acpi_unload_table() (Bob Moore)
* Debugger and utilities updates (Erik Schmauss)
* Fix for unloading tables loaded via configfs (Nikolaus Voss)
- Add support for EFI specific purpose memory to optionally allow
either application-exclusive or core-kernel-mm managed access to
differentiated memory (Dan Williams)
- Fix and clean up processing of the HMAT table (Brice Goglin, Qian
Cai, Tao Xu)
- Update the ACPI EC driver to make it work on systems with
hardware-reduced ACPI (Daniel Drake)
- Always build in support for the Generic Event Device (GED) to allow
one kernel binary to work both on systems with full hardware ACPI
and hardware-reduced ACPI (Arjan van de Ven)
- Fix the table unload mechanism to unregister platform devices
created when the given table was loaded (Andy Shevchenko)
- Rework the lid blacklist handling in the button driver and add more
lid quirks to it (Hans de Goede)
- Improve ACPI-based device enumeration for some platforms based on
Intel BayTrail SoCs (Hans de Goede)
- Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and
prevent handlers from being registered for unhandled PMIC OpRegions
(Hans de Goede)
- Unify ACPI _HID/_UID matching (Andy Shevchenko)
- Clean up documentation and comments (Cao jin, James Pack, Kacper
Piwiński)"
* tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
ACPI: OSI: Shoot duplicate word
ACPI: HMAT: use %u instead of %d to print u32 values
ACPI: NUMA: HMAT: fix a section mismatch
ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm
ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device
ACPI: NUMA: HMAT: Register HMAT at device_initcall level
device-dax: Add a driver for "hmem" devices
dax: Fix alloc_dax_region() compile warning
lib: Uplevel the pmem "region" ida to a global allocator
x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
arm/efi: EFI soft reservation to memblock
x86/efi: EFI soft reservation to E820 enumeration
efi: Common enable/disable infrastructure for EFI soft reservation
x86/efi: Push EFI_MEMMAP check into leaf routines
efi: Enumerate EFI_MEMORY_SP
ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
ACPICA: Update version to 20191018
ACPICA: debugger: remove leading whitespaces when converting a string to a buffer
ACPICA: acpiexec: initialize all simple types and field units from user input
ACPICA: debugger: add field unit support for acpi_db_get_next_token
...
Pull x86 merge fix from Ingo Molnar:
"I missed one other semantic conflict that can result in build failures
on certain stripped down x86 32-bit configs, for example 32-bit
'allnoconfig' where CONFIG_X86_IOPL_IOPERM gets turned off"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/iopl: Make 'struct tss_struct' constant size again
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
Pull perf updates from Ingo Molnar:
"The main kernel side changes in this cycle were:
- Various Intel-PT updates and optimizations (Alexander Shishkin)
- Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu)
- Add support for LSM and SELinux checks to control access to the
perf syscall (Joel Fernandes)
- Misc other changes, optimizations, fixes and cleanups - see the
shortlog for details.
There were numerous tooling changes as well - 254 non-merge commits.
Here are the main changes - too many to list in detail:
- Enhancements to core tooling infrastructure, perf.data, libperf,
libtraceevent, event parsing, vendor events, Intel PT, callchains,
BPF support and instruction decoding.
- There were updates to the following tools:
perf annotate
perf diff
perf inject
perf kvm
perf list
perf maps
perf parse
perf probe
perf record
perf report
perf script
perf stat
perf test
perf trace
- And a lot of other changes: please see the shortlog and Git log for
more details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits)
perf parse: Fix potential memory leak when handling tracepoint errors
perf probe: Fix spelling mistake "addrees" -> "address"
libtraceevent: Fix memory leakage in copy_filter_type
libtraceevent: Fix header installation
perf intel-bts: Does not support AUX area sampling
perf intel-pt: Add support for decoding AUX area samples
perf intel-pt: Add support for recording AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user
perf auxtrace: Add support for queuing AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for dumping AUX area samples
perf inject: Cut AUX area samples
perf record: Add aux-sample-size config term
perf record: Add support for AUX area sampling
perf auxtrace: Add support for AUX area sample recording
perf auxtrace: Move perf_evsel__find_pmu()
perf record: Add a function to test for kernel support for AUX area sampling
perf tools: Add kernel AUX area sampling definitions
perf/core: Make the mlock accounting simple again
perf report: Jump to symbol source view from total cycles view
...
The old x86_32 doublefault_fn() was old and crufty, and it did not
even try to recover. do_double_fault() is much nicer. Rewrite the
32-bit double fault code to sanitize CPU state and call
do_double_fault(). This is mostly an exercise i386 archaeology.
With this patch applied, 32-bit double faults get a real stack trace,
just like 64-bit double faults.
[ mingo: merged the patch to a later kernel base. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are three problems with the current layout of the doublefault
stack and TSS. First, the TSS is only cacheline-aligned, which is
not enough -- if the hardware portion of the TSS (struct x86_hw_tss)
crosses a page boundary, horrible things happen [0]. Second, the
stack and TSS are global, so simultaneous double faults on different
CPUs will cause massive corruption. Third, the whole mechanism
won't work if user CR3 is loaded, resulting in a triple fault [1].
Let the doublefault stack and TSS share a page (which prevents the
TSS from spanning a page boundary), make it percpu, and move it into
cpu_entry_area. Teach the stack dump code about the doublefault
stack.
[0] Real hardware will read past the end of the page onto the next
*physical* page if a task switch happens. Virtual machines may
have any number of bugs, and I would consider it reasonable for
a VM to summarily kill the guest if it tries to task-switch to
a page-spanning TSS.
[1] Real hardware triple faults. At least some VMs seem to hang.
I'm not sure what's going on.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 64-bit doublefault handler is much nicer than the 32-bit one.
As a first step toward unifying them, make the 64-bit handler
self-contained. This should have no effect no functional effect
except in the odd case of x86_64 with CONFIG_DOUBLEFAULT=n in which
case it will change the logging a bit.
This also gets rid of CONFIG_DOUBLEFAULT configurability on 64-bit
kernels. It didn't do anything useful -- CONFIG_DOUBLEFAULT=n
didn't actually disable doublefault handling on x86_64.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After the following commit:
05b042a194: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
'struct cpu_entry_area' has to be Kconfig invariant, so that we always
have a matching CPU_ENTRY_AREA_PAGES size.
This commit added a CONFIG_X86_IOPL_IOPERM dependency to tss_struct:
111e7b15cf: ("x86/ioperm: Extend IOPL config to control ioperm() as well")
Which, if CONFIG_X86_IOPL_IOPERM is turned off, reduces the size of
cpu_entry_area by two pages, triggering the assert:
./include/linux/compiler.h:391:38: error: call to ‘__compiletime_assert_202’ declared with attribute error: BUILD_BUG_ON failed: (CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE
Simplify the Kconfig dependencies and make cpu_entry_area constant
size on 32-bit kernels again.
Fixes: 05b042a194: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 iopl updates from Ingo Molnar:
"This implements a nice simplification of the iopl and ioperm code that
Thomas Gleixner discovered: we can implement the IO privilege features
of the iopl system call by using the IO permission bitmap in
permissive mode, while trapping CLI/STI/POPF/PUSHF uses in user-space
if they change the interrupt flag.
This implements that feature, with testing facilities and related
cleanups"
[ "Simplification" may be an over-statement. The main goal is to avoid
the cli/sti of iopl by effectively implementing the IO port access
parts of iopl in terms of ioperm.
This may end up not workign well in case people actually depend on
cli/sti being available, or if there are mixed uses of iopl and
ioperm. We will see.. - Linus ]
* 'x86-iopl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/ioperm: Fix use of deprecated config option
x86/entry/32: Clarify register saving in __switch_to_asm()
selftests/x86/iopl: Extend test to cover IOPL emulation
x86/ioperm: Extend IOPL config to control ioperm() as well
x86/iopl: Remove legacy IOPL option
x86/iopl: Restrict iopl() permission scope
x86/iopl: Fixup misleading comment
selftests/x86/ioperm: Extend testing so the shared bitmap is exercised
x86/ioperm: Share I/O bitmap if identical
x86/ioperm: Remove bitmap if all permissions dropped
x86/ioperm: Move TSS bitmap update to exit to user work
x86/ioperm: Add bitmap sequence number
x86/ioperm: Move iobitmap data into a struct
x86/tss: Move I/O bitmap data into a seperate struct
x86/io: Speedup schedule out of I/O bitmap user
x86/ioperm: Avoid bitmap allocation if no permissions are set
x86/ioperm: Simplify first ioperm() invocation logic
x86/iopl: Cleanup include maze
x86/tss: Fix and move VMX BUILD_BUG_ON()
x86/cpu: Unify cpu_init()
...
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
Pull x86 fixes from Ingo Molnar:
"These are the fixes left over from the v5.4 cycle:
- Various low level 32-bit entry code fixes and improvements by Andy
Lutomirski, Peter Zijlstra and Thomas Gleixner.
- Fix 32-bit Xen PV breakage, by Jan Beulich"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3
x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise
selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel
selftests/x86/mov_ss_trap: Fix the SYSENTER test
x86/entry/32: Fix NMI vs ESPFIX
x86/entry/32: Unwind the ESPFIX stack earlier on exception entry
x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL
x86/entry/32: Use %ss segment where required
x86/entry/32: Fix IRET exception
x86/cpu_entry_area: Add guard page for entry stack on 32bit
x86/pti/32: Size initial_page_table correctly
x86/doublefault/32: Fix stack canaries in the double fault handler
x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
x86/stackframe/32: Repair 32-bit Xen PV
Pull x86 platform updates from Ingo Molnar:
"UV platform updates (with a 'hubless' variant) and Jailhouse updates
for better UART support"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/jailhouse: Only enable platform UARTs if available
x86/jailhouse: Improve setup data version comparison
x86/platform/uv: Account for UV Hubless in is_uvX_hub Ops
x86/platform/uv: Check EFI Boot to set reboot type
x86/platform/uv: Decode UVsystab Info
x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files
x86/platform/uv: Setup UV functions for Hubless UV Systems
x86/platform/uv: Add return code to UV BIOS Init function
x86/platform/uv: Return UV Hubless System Type
x86/platform/uv: Save OEM_ID from ACPI MADT probe
Pull x86 mm updates from Ingo Molnar:
"The main changes in this cycle were:
- A PAT series from Davidlohr Bueso, which simplifies the memtype
rbtree by using the interval tree helpers. (There's more cleanups
in this area queued up, but they didn't make the merge window.)
- Also flip over CONFIG_X86_5LEVEL to default-y. This might draw in a
few more testers, as all the major distros are going to have
5-level paging enabled by default in their next iterations.
- Misc cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Rename pat_rbtree.c to pat_interval.c
x86/mm/pat: Drop the rbt_ prefix from external memtype calls
x86/mm/pat: Do not pass 'rb_root' down the memtype tree helper functions
x86/mm/pat: Convert the PAT tree to a generic interval tree
x86/mm: Clean up the pmd_read_atomic() comments
x86/mm: Fix function name typo in pmd_read_atomic() comment
x86/cpu: Clean up intel_tlb_table[]
x86/mm: Enable 5-level paging support by default
Pull x86 kdump updates from Ingo Molnar:
"This solves a kdump artifact where encrypted memory contents are
dumped, instead of unencrypted ones.
The solution also happens to simplify the kdump code, to everyone's
delight"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Align function arguments on opening braces
x86/kdump: Remove the backup region handling
x86/kdump: Always reserve the low 1M when the crashkernel option is specified
x86/crash: Add a forward declaration of struct kimage
Pull x86 hyperv updates from Ingo Molnar:
"Misc updates to the hyperv guest code:
- Rework clockevents initialization to better support hibernation
- Allow guests to enable InvariantTSC
- Micro-optimize send_ipi_one"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Initialize clockevents earlier in CPU onlining
x86/hyperv: Allow guests to enable InvariantTSC
x86/hyperv: Micro-optimize send_ipi_one()
Pull x86 syscall entry updates from Ingo Molnar:
"These changes relate to the preparatory cleanup of syscall function
type signatures - to fix indirect call mismatches with Control-Flow
Integrity (CFI) checking.
No change in behavior intended"
* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use the correct function type for native_set_fixmap()
syscalls/x86: Fix function types in COND_SYSCALL
syscalls/x86: Use the correct function type for sys_ni_syscall
syscalls/x86: Use COMPAT_SYSCALL_DEFINE0 for IA32 (rt_)sigreturn
syscalls/x86: Wire up COMPAT_SYSCALL_DEFINE0
syscalls/x86: Use the correct function type in SYSCALL_DEFINE0
Pull x86 cpu and fpu updates from Ingo Molnar:
- math-emu fixes
- CPUID updates
- sanity-check RDRAND output to see whether the CPU at least pretends
to produce random data
- various unaligned-access across cachelines fixes in preparation of
hardware level split-lock detection
- fix MAXSMP constraints to not allow !CPUMASK_OFFSTACK kernels with
larger than 512 NR_CPUS
- misc FPU related cleanups
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Align the x86_capability array to size of unsigned long
x86/cpu: Align cpu_caps_cleared and cpu_caps_set to unsigned long
x86/umip: Make the comments vendor-agnostic
x86/Kconfig: Rename UMIP config parameter
x86/Kconfig: Enforce limit of 512 CPUs with MAXSMP and no CPUMASK_OFFSTACK
x86/cpufeatures: Add feature bit RDPRU on AMD
x86/math-emu: Limit MATH_EMULATION to 486SX compatibles
x86/math-emu: Check __copy_from_user() result
x86/rdrand: Sanity-check RDRAND output
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Use XFEATURE_FP/SSE enum values instead of hardcoded numbers
x86/fpu: Shrink space allocated for xstate_comp_offsets
x86/fpu: Update stale variable name in comment
Pull x86 objtool, cleanup, and apic updates from Ingo Molnar:
"Objtool:
- Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most
distros are still on gawk 4.2.x.
Cleanup:
- Misc cleanups, plus the removal of obsolete code such as Calgary
IOMMU support, which code hasn't seen any real testing in a long
time and there's no known users left.
apic:
- Two changes: a cleanup and a fix for an (old) race for oneshot
threaded IRQ handlers"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Fix awk regexp warnings
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove unused asm/rio.h
x86: Fix typos in comments
x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h>
x86/pci: Remove pci_64.h
x86: Remove the calgary IOMMU driver
x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments
x86/kdump: Remove the unused crash_copy_backup_region()
x86/nmi: Remove stale EDAC include leftover
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Rename misnamed functions
x86/ioapic: Prevent inconsistent state when moving an interrupt
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
- Data abort report and injection
- Steal time support
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt polling counters
- Make the emulated timer PREEMPT_RT compliant
s390:
- Small fixes and cleanups
- selftest improvements
- yield improvements
PPC:
- Add capability to tell userspace whether we can single-step the guest.
- Improve the allocation of XIVE virtual processor IDs
- Rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
- Minor cleanups and improvements.
x86:
- XSAVES support for AMD
- more accurate report of nested guest TSC to the nested hypervisor
- retpoline optimizations
- support for nested 5-level page tables
- PMU virtualization optimizations, and improved support for nested
PMU virtualization
- correct latching of INITs for nested virtualization
- IOAPIC optimization
- TSX_CTRL virtualization for more TAA happiness
- improved allocation and flushing of SEV ASIDs
- many bugfixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJd27PMAAoJEL/70l94x66DspsH+gPc6YWtKJFJH58Zj8NrNh6y
t0FwDFcvUa51+m4jaY4L5Y8+zqu1dZFnPPhFGqNWpxrjCEvE/glQJv3BiUX06Seh
aYUHNymGoYCTJOHaaGhV+NlgQaDuZOCOkIsOLAPehyFd1KojwB+FRC0xmO6aROPw
9yQgYrKuK1UUn5HwxBNrMS4+Xv+2iKv/9sTnq1G4W2qX2NZQg84LVPg1zIdkCh3D
3GOvoCBEk3ivQqjmdE7rP/InPr0XvW0b6TFhchIk8J6jEIQFHsmOUefiTvTxsIHV
OKAZwvyeYPrYHA/aDZpaBmY2aR0ydfKDUQcviNIJoF1vOktGs0hvl3VbsmG8QCg=
=OSI1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- data abort report and injection
- steal time support
- GICv4 performance improvements
- vgic ITS emulation fixes
- simplify FWB handling
- enable halt polling counters
- make the emulated timer PREEMPT_RT compliant
s390:
- small fixes and cleanups
- selftest improvements
- yield improvements
PPC:
- add capability to tell userspace whether we can single-step the
guest
- improve the allocation of XIVE virtual processor IDs
- rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
- minor cleanups and improvements.
x86:
- XSAVES support for AMD
- more accurate report of nested guest TSC to the nested hypervisor
- retpoline optimizations
- support for nested 5-level page tables
- PMU virtualization optimizations, and improved support for nested
PMU virtualization
- correct latching of INITs for nested virtualization
- IOAPIC optimization
- TSX_CTRL virtualization for more TAA happiness
- improved allocation and flushing of SEV ASIDs
- many bugfixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints
KVM: x86: Grab KVM's srcu lock when setting nested state
KVM: x86: Open code shared_msr_update() in its only caller
KVM: Fix jump label out_free_* in kvm_init()
KVM: x86: Remove a spurious export of a static function
KVM: x86: create mmu/ subdirectory
KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page
KVM: x86: remove set but not used variable 'called'
KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning
KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it
KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality
KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID
KVM: x86: do not modify masked bits of shared MSRs
KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path
KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one
KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT
KVM: x86: Unexport kvm_vcpu_reload_apic_access_page()
KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1
KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXdtnVQAKCRCAXGG7T9hj
vg1hAQDqG1DKZvR6BtlvETFMz7ZlrXVkpm6C74Wy4bLiO5KSSAEAneFbrDwFVa0c
d05Z6wemjlyEd7u3gkVQBKfHkbWBRQQ=
=aDIL
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small series to remove the build constraint of Xen x86 MCE handling
to 64-bit only
- a bunch of minor cleanups
* tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix Kconfig indentation
xen/mcelog: also allow building for 32-bit kernels
xen/mcelog: add PPIN to record when available
xen/mcelog: drop __MC_MSR_MCGCAP
xen/gntdev: Use select for DMA_SHARED_BUFFER
xen: mm: make xen_mm_init static
xen: mm: include <xen/xen-ops.h> for missing declarations
- On ARMv8 CPUs without hardware updates of the access flag, avoid
failing cow_user_page() on PFN mappings if the pte is old. The patches
introduce an arch_faults_on_old_pte() macro, defined as false on x86.
When true, cow_user_page() makes the pte young before attempting
__copy_from_user_inatomic().
- Covert the synchronous exception handling paths in
arch/arm64/kernel/entry.S to C.
- FTRACE_WITH_REGS support for arm64.
- ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4
- Several kselftest cases specific to arm64, together with a MAINTAINERS
update for these files (moved to the ARM64 PORT entry).
- Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
instructions under certain conditions.
- Workaround for Cortex-A57 and A72 errata where the CPU may
speculatively execute an AT instruction and associate a VMID with the
wrong guest page tables (corrupting the TLB).
- Perf updates for arm64: additional PMU topologies on HiSilicon
platforms, support for CCN-512 interconnect, AXI ID filtering in the
IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.
- GICv3 optimisation to avoid a heavy barrier when accessing the
ICC_PMR_EL1 register.
- ELF HWCAP documentation updates and clean-up.
- SMC calling convention conduit code clean-up.
- KASLR diagnostics printed during boot
- NVIDIA Carmel CPU added to the KPTI whitelist
- Some arm64 mm clean-ups: use generic free_initrd_mem(), remove stale
macro, simplify calculation in __create_pgd_mapping(), typos.
- Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
endinanness to help with allmodconfig.
-----BEGIN PGP SIGNATURE-----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=TPL9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Apart from the arm64-specific bits (core arch and perf, new arm64
selftests), it touches the generic cow_user_page() (reviewed by
Kirill) together with a macro for x86 to preserve the existing
behaviour on this architecture.
Summary:
- On ARMv8 CPUs without hardware updates of the access flag, avoid
failing cow_user_page() on PFN mappings if the pte is old. The
patches introduce an arch_faults_on_old_pte() macro, defined as
false on x86. When true, cow_user_page() makes the pte young before
attempting __copy_from_user_inatomic().
- Covert the synchronous exception handling paths in
arch/arm64/kernel/entry.S to C.
- FTRACE_WITH_REGS support for arm64.
- ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4
- Several kselftest cases specific to arm64, together with a
MAINTAINERS update for these files (moved to the ARM64 PORT entry).
- Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
instructions under certain conditions.
- Workaround for Cortex-A57 and A72 errata where the CPU may
speculatively execute an AT instruction and associate a VMID with
the wrong guest page tables (corrupting the TLB).
- Perf updates for arm64: additional PMU topologies on HiSilicon
platforms, support for CCN-512 interconnect, AXI ID filtering in
the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.
- GICv3 optimisation to avoid a heavy barrier when accessing the
ICC_PMR_EL1 register.
- ELF HWCAP documentation updates and clean-up.
- SMC calling convention conduit code clean-up.
- KASLR diagnostics printed during boot
- NVIDIA Carmel CPU added to the KPTI whitelist
- Some arm64 mm clean-ups: use generic free_initrd_mem(), remove
stale macro, simplify calculation in __create_pgd_mapping(), typos.
- Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
endinanness to help with allmodconfig"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: Kconfig: add a choice for endianness
kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous"
arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE
MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry
arm64: kaslr: Check command line before looking for a seed
arm64: kaslr: Announce KASLR status on boot
kselftest: arm64: fake_sigreturn_misaligned_sp
kselftest: arm64: fake_sigreturn_bad_size
kselftest: arm64: fake_sigreturn_duplicated_fpsimd
kselftest: arm64: fake_sigreturn_missing_fpsimd
kselftest: arm64: fake_sigreturn_bad_size_for_magic0
kselftest: arm64: fake_sigreturn_bad_magic
kselftest: arm64: add helper get_current_context
kselftest: arm64: extend test_init functionalities
kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
kselftest: arm64: mangle_pstate_invalid_daif_bits
kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
kselftest: arm64: extend toplevel skeleton Makefile
drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
...
