Add more attributes for reset cause indication for the cases when
system reset has been caused by watchdog, BIOS reload and COMEX
thermal shutdown.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Modify DMI matching order: perform matching based on DMI_BOARD_NAME
before matching based on DMI_BOARD_VENDOR and DMI_PRODUCT_NAME in order
to reduce the number of ‘dmi_table’ entries necessary for new systems
support and keep matching order in logical way.
For example, the existing check for DMI_PRODUCT_NAME with prefixes
“MSN27", “MSN24”, "MSB” matches systems MSN2700-BXXXX, MSN2700-XXXX,
MSN2410-BXXXX, MSB7800-XXXX, where ‘XXXX’ specifies some systems
hardware flavors.
At the same time these systems also matched by DMI_BOARD_NAME
“VMOD0001”, because they all have the same platform configuration (LED,
interrupt control, mux etcetera).
New systems with different platform configuration, but with similar
DMI_PRODUCT_NAME MSN2700-2XXXX, MSN2700-2XXXX, MSB7800-2XXXX are about
to be added. These system have similar DMI_PRODUCT_NAME, since they
have same ports configuration as their predecessors. All new systems
will be matched by DMI_BOARD_NAME “VMOD0008”.
With the change provided in the patch it is enough just to add
“VMOD0008” match following natural after “VMOD0007”, otherwise
“VMOD0008” or all “MSN2700-2XXXX”, “MSN2700-2XXXX”, “MSB7800-2XXXX”
should be added on top of ‘mlxplat_dmi_table” in order to be matched
before “MSN27", “MSN24”, "MSB”.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use separated regamp structures for old and next generation systems.
Next generation systems don’t require write protection removing.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Activate 'i2c-mlxcpld' driver with 'platform_device_register_resndata'
instead off 'platform_device_register_simple' in order to pass platform
specific info.
Add platform i2c data for the next generation systems.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commands which causes PUNIT writes, store them and restore them on system
resume. The driver stores all such requests in a hash table and stores the
the latest mailbox request parameters. On resume these commands mail box
commands are executed again. There are only 5 such mail box commands which
will trigger such processing so a very low overhead in store and execute
on resume. Also there is no order requirement for mail box commands for
these write/set commands. There is one MSR request for changing turbo
ratio limits, this also stored and get restored on resume and cpu online.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
While using new non arhitectural features using PUNIT Mailbox and MMIO
read/write interface, still there is need to operate using MSRs to
control PUNIT. User space could have used user user-space MSR interface for
this, but when user space MSR access is disabled, then it can't. Here only
limited number of MSRs are allowed using this new interface.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add an IOCTL to send mailbox commands to PUNIT using PUNIT MSRs for
mailbox. Some CPU models don't have PCI device, so need to use MSRs.
A limited set of mailbox commands can be sent to PUNIT.
This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and control Intel Speed Select features.
The MBOX commands ids and semantics of the message can be checked from
the source code of the tool.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add an IOCTL to send mailbox commands to PUNIT using PUNIT PCI device.
A limited set of mailbox commands can be sent to PUNIT.
This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and control Intel Speed Select features.
The MBOX commands ids and semantics of the message can be checked from
the source code of the tool.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Added MMIO interface to read/write specific offsets in PUNIT PCI device
which export core priortization. This MMIO interface can be used using
ioctl interface on /dev/isst_interface using IOCTL ISST_IF_IO_CMD.
This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and set core priority. The MMIO offsets and
semantics of the message can be checked from the source code of the tool.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add processing for IOCTL command ISST_IF_GET_PHY_ID. This converts from the
Linux logical CPU to PUNIT CPU numbering scheme.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are two per CPU data needs to be stored and cached to avoid repeated
MSR readings for accessing them later:
- Physical to logical CPU conversion
The PUNIT uses a different CPU numbering scheme which is not APIC id based.
So we need to establish relationship between PUNIT CPU number and Linux
logical CPU numbering which is based on APIC id. There is an MSR 0x53
(MSR_THREAD_ID), which gets physical CPU number for the local CPU where it
is read. Also the CPU mask in some messages will inform which CPUs needs
to be online/offline for a TDP level. During TDP switch if user offlined
some CPUs, then the physical CPU mask can't be converted as we can't
read MSR on an offlined CPU to go to a lower TDP level by onlining more
CPUs. So the mapping needs to be established at the boot up time.
- Bus number corresponding to a CPU
A group of CPUs are in a control of a PUNIT. The PUNIT device is exported
as PCI device. To do operation on a PUNIT for a CPU, we need to find out
to which PCI device it is related to. This is done by reading MSR 0x128
(MSR_CPU_BUS_NUMBER).
So during CPU online stages the above MSRs are read and stored. Later
this stored information is used to process IOCTLs request from the user
space.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Encapsulate common functions which all Intel Speed Select Technology
interface drivers can use. This creates API to register misc device for
user kernel communication and handle all common IOCTLs. As part of the
registry it allows a callback which is to handle domain specific ioctl
processing.
There can be multiple drivers register for services, which can be built
as modules. So this driver handle contention during registry and as well
as during removal. Once user space opened the misc device, the registered
driver will be prevented from removal. Also once misc device is opened by
the user space new client driver can't register, till the misc device is
closed.
There are two types of client drivers, one to handle mail box interface
and the other is to allow direct read/write to some specific MMIO space.
This common driver implements IOCTL ISST_IF_GET_PLATFORM_INFO.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For ECs that support it, the EC returns the number of slp_s0
transitions and whether or not there was a timeout in the resume
response. Expose the last resume result to usermode via debugfs so
that usermode can detect and report S0ix timeouts.
Signed-off-by: Evan Green <evgreen@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Replace custom grown macro with generic INTEL_CPU_FAM6() one.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This
adds it to the critclk_systems DMI table so the clocks are marked as
CLK_CRITICAL and not turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/platform/x86/acer-wmi.c: In function ‘set_u32’:
drivers/platform/x86/acer-wmi.c:1378:33: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (cap == ACER_CAP_WIRELESS ||
^
drivers/platform/x86/acer-wmi.c:1386:3: note: here
case ACER_WMID:
^~~~
drivers/platform/x86/acer-wmi.c:1393:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
else if (wmi_has_guid(WMID_GUID2))
^
drivers/platform/x86/acer-wmi.c:1395:3: note: here
default:
^~~~~~~
drivers/platform/x86/acer-wmi.c: In function ‘get_u32’:
drivers/platform/x86/acer-wmi.c:1340:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (cap == ACER_CAP_MAILLED) {
^
drivers/platform/x86/acer-wmi.c:1344:2: note: here
case ACER_WMID:
^~~~
drivers/platform/x86/acer-wmi.c: In function ‘WMID_get_u32’:
drivers/platform/x86/acer-wmi.c:1013:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (quirks->mailled == 1) {
^
drivers/platform/x86/acer-wmi.c:1018:2: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Turns out the Hi10 Air is built by multiple companies so using Hampoo
as a filter is not enough to cover all variants.
This has been verified as working on the Hampoo and Morshow version.
Signed-off-by: Christian Oder <me@myself5.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some function keys on the built in keyboard on Xiaomi's notebooks does
not produce any key events when pressed in combination with the function
key. Some of these keys do report that they are being pressed via WMI
events.
This driver reports key events for Fn+F7 and double tap on Fn.
Other WMI events that are reported by the hardware but not utilized by
this driver are Caps Lock(which already work) and Fn lock/unlock.
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The lightbar driver never assigned the drvdata in probe method, and
thus there is nothing there. Need to get the ec_dev from the parent's
drvdata.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current implementation of the event queue both
wastes space using a doubly linked list and isn't super
obvious in how it behaves. This converts the queue to an
actual circular buffer. The size of the queue is a
tunable module parameter. This also fixes a few other things:
- A memory leak that occurred when the ACPI device was
removed, but the events were not freed from the queue.
- Now kfree() the oldest event from outside all locks.
- Add newline to logging messages.
- Add helper macros to calculate size of events.
- Remove unneeded lock around a check for dev_data->exist
in hangup_device().
- Remove an unneeded null event pointer check in enqueue_events().
- Correct some comments.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
kernel-doc comments have a prescribed format. To be _particularly_ correct
we should also capitalise the brief description and terminate it with a
period.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nick Crews <ncrews@chromium.org>
On many boards, communication between the kernel and the Embedded
Controller happens over an LPC bus. In these cases, the kernel config
CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
Microchip Embedded Controller (MEC) that is different from the regular
EC. On these devices, the same LPC bus is used, but the protocol is
a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
config is enabled. Currently, the kernel decides at compile-time whether
or not to use the MEC variant, and, when that kernel option is selected
it breaks the other boards. We would like a kind of runtime detection to
avoid this.
This patch adds that detection mechanism by probing the protocol at
runtime, first we assume that a MEC variant is connected, and if the
protocol fails it fallbacks to the regular EC. This adds a bit of
overload because we try to read twice on those LPC boards that doesn't
contain a MEC variant, but is a better solution than having to select the
EC variant at compile-time.
While here also fix the alignment in Kconfig file for this config option
replacing the spaces by tabs.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
The cros_ec_lpc_reg files are only used by the cros_ec_lpc core and
there isn't logical separation between them. So, merge those files into
the cros_ec_lpc also allowing us to drop the header file used for the
interface between the two.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Nick Crews <ncrews@chromium.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When copying an event to userspace failed, the event queue
lock was never released. This fixes that.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
kernel-doc comments have a prescribed format. To be _particularly_
correct we should also capitalise the brief description and terminate
it with a period.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The new debugfs entry 'uptime' is being made available to userspace so that
a userspace daemon can synchronize EC logs with host time.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
[rework based on Tim's first approach]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The struct wmi_device_id has a context pointer field, forward this
pointer as an argument to the probe function in struct wmi_driver.
Update existing users of the same probe function to accept this new
context argument.
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When using wmi_install_notify_handler() to initialize a WMI handler a
data pointer can be supplied which will be passed on to the notification
handler. No similar feature exist when handling WMI events via struct
wmi_driver.
Add a context field pointer to struct wmi_device_id and add a function
find_guid_context() to retrieve that context pointer.
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The keyboard backlight is automatically disabled when the module is
unloaded as it is exposed as a ledclass device. Change this behavior to
ignore setting brightness when the device is in unloading state.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The WMI exposes a write-only device ID where up to three fan modes can be
switched on some laptops (TUF Gaming FX505GM). There is a hotkey
combination Fn-F5 that does have a fan icon, which is designed to toggle
between fan modes. The DSTS of the device ID returns information about the
presence of this capability and the presence of each of the two additional
fan modes as a bitmask (0x01 - overboost present, 0x02 - silent present)
[1].
Add a SysFS entry that reads the last written value and updates value in
WMI on write and a hotkey handler that toggles the modes taking into
account their availability according to DSTS.
Modes:
* 0x00 - normal or balanced,
* 0x01 - overboost, increased fan RPM,
* 0x02 - silent, decreased fan RPM
[1] Link: https://lkml.org/lkml/2019/4/12/110
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Suggested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The obviously wrong value 1 for temperature device ID in this driver is
returned by at least some devices, including TUF Gaming series laptops,
instead of 0 as expected previously. Observable effect is that a
temp1_input in hwmon reads temperature near absolute zero.
Consider 0.1 K an erroneous value in addition to 0 K.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The driver has grown pretty big and will grow more, which makes it hard to
navigate and understand. Add uniform comments to the code and ensure that
it is sorted into logical sections.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Remove exit label as it is only used once from the point in code where no
cleanup is required and return can be called immediately.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The microphone mute key is missing from sparse keymap. It is present on
FX505GM and possibly other laptops. Add the missing code.
Also, comment on the fan mode switch key, which has the same code as the
already used key.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Event codes are expected to be retrieved from a queue on at least some
models. Specifically, very likely the ACPI WMI devices with _UID ATK are
queued whereas those with ASUSWMI are not [1].
The WMI event codes are pushed into a circular buffer queue. After the INIT
method is called, ACPI code is allowed to push events into this buffer.
The INIT method cannot be reverted. If the module is unloaded and an event
(such as hotkey press) gets emitted before inserting it back the events get
processed delayed by one or if the queue overflows, additionally delayed by
about 3 seconds.
It might be considered a minor issue and no normal user would likely
observe this (there is little reason unloading the driver), but it does
significantly frustrate a developer who is unlucky enough to encounter
this. Therefore, the fallback to unqueued behavior occurs whenever
something unexpected happens.
The fix flushes the old key codes out of the queue on load. After receiving
event the queue is read until either ..FFFF or 1 is encountered. Also as
noted in [1] it is checked whether notify code is equal to 0xFF before
enabling queue processing in WMI notify handler.
DSDT examples:
FX505GM
Device (ATKD)
{ ..
Name (ATKQ, Package (0x10)
{
0xFFFFFFFF, ..
}
Method (IANQ, 1, Serialized)
{
If ((AQNO >= 0x10))
{
Local0 = 0x64
While ((Local0 && (AQNO >= 0x10)))
{
Local0--
Sleep (0x0A)
}
...
..
AQTI++
AQTI &= 0x0F
ATKQ [AQTI] = Arg0
...
}
Method (GANQ, 0, Serialized)
{
..
If (AQNO)
{
...
Local0 = DerefOf (ATKQ [AQHI])
AQHI++
AQHI &= 0x0F
Return (Local0)
}
Return (One)
}
This code is almost identical to K54C, which does return Ones on empty
queue.
K54C:
Method (GANQ, 0, Serialized)
{
If (AQNO)
{
...
Return (Local0)
}
Return (Ones)
}
[1] Link: https://lkml.org/lkml/2019/4/12/104
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Suggested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Refactor WMI event handling into separate functions for getting the event
code and handling the retrieved event code as a preparation for
introduction of WMI event queue support.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The DSTS method detection mistakenly selects DCTS instead of DSTS if
nothing is returned when the method ID is not defined in WMNB. As a result,
the control of keyboard backlight is not functional for TUF Gaming series
laptops. Implement detection based on _UID of the WMI device instead.
There is evidence that DCTS is handled by ACPI WMI devices that have _UID
ASUSWMI, whereas none of the devices without ASUSWMI respond to DCTS and
DSTS is used instead [1].
DSDT examples:
FX505GM (_UID ATK):
Method (WMNB, 3, Serialized)
{ ...
If ((Local0 == 0x53545344))
{
...
Return (Zero)
}
...
// No return
}
K54C (_UID ATK):
Method (WMNB, 3, Serialized)
{ ...
If ((Local0 == 0x53545344))
{
...
Return (0x02)
}
...
Return (0xFFFFFFFE)
}
[1] Link: https://lkml.org/lkml/2019/4/11/322
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Suggested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a new function to acpi.h / wmi.c that returns _UID of the ACPI WMI
device. For example, it returns "ATK" for the following declaration in
DSDT:
Device (ATKD)
{
Name (_HID, "PNP0C14" /* Windows Management Instrumentation Device */)
// _HID: Hardware ID
Name (_UID, "ATK") // _UID: Unique ID
..
Generally, it is possible that multiple PNP0C14 ACPI devices are present in
the system as mentioned in the commit message of commit bff431e49f
("ACPI: WMI: Add ACPI-WMI mapping driver").
Therefore the _UID is returned for a specific ACPI device that declares the
given GUID, to which it is also mapped by other methods of wmi module.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The asus-nb-wmi driver is matched by WMI alias but fails to load on TUF
Gaming series laptops producing multiple ACPI errors in the kernel log.
The input buffer for WMI method invocation size is 2 dwords, whereas
3 are expected by this model.
FX505GM:
..
Method (WMNB, 3, Serialized)
{
P8XH (Zero, 0x11)
CreateDWordField (Arg2, Zero, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
CreateDWordField (Arg2, 0x08, IIA2)
Local0 = (Arg1 & 0xFFFFFFFF)
...
Compare with older K54C:
...
Method (WMNB, 3, NotSerialized)
{
CreateDWordField (Arg2, 0x00, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
Local0 = (Arg1 & 0xFFFFFFFF)
...
Increase buffer size to 3 dwords. No negative consequences of this change
are expected, as the input buffer size is not verified. The original
function is replaced by a wrapper for a new method passing value 0 for the
last parameter. The new function will be used to control RGB keyboard
backlight.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The error code and return value are mixed up. The intensity is always set
to 0 on load as kbd_led_read returns either 0 or negative value. To
reproduce set backlight to maximum, reload driver and try to increase it
using keyboard hotkey, the intensity will drop as a result. Correct the
implementation.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The driver does not clean up the hwmon device on exit or error. To
reproduce the bug, repeat rmmod, insmod to verify that device number
/sys/devices/platform/asus-nb-wmi/hwmon/hwmon?? grows every time. Replace
call for registering device with devm_* version that unregisters it
automatically.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Ike Panhc <ike.pan@canonical.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove the
variable that was saving it and just recursively delete the whole
directory.
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
HP ProBook 450 G0 needs a non-standard mapping (x_inverted).
Signed-off-by: Colin Sindle <csindle@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix sparse warnings:
drivers/platform/x86/pcengines-apuv2.c:80:27: warning: symbol 'gpios_led_table' was not declared. Should it be static?
drivers/platform/x86/pcengines-apuv2.c:113:27: warning: symbol 'gpios_key_table' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-By: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix a null pointer deference by acpi_driver_data() if device is
null (dereference before check). We should only set cdev and check
this is OK after we are sure device is not null.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The CONFIG_BACKLIGHT_LCD_SUPPORT was removed in commit 8c5dc8d9f1
("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel
symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now
available directly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Added touch screen info for CHUWI Hi10 Plus tablet.
Signed-off-by: Daniel Smith <danct12@disroot.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Randy Dunlap says:
drivers/platform/olpc/Kconfig needs to use "menuconfig" like all of the
other Kconfig files in drivers/platform/ so that its menu is listed in
the correct place in *config interfaces.
Otherwise he's sad.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ERROR: "power_supply_put" [drivers/platform/olpc/olpc-xo175-ec.ko] undefined!
ERROR: "power_supply_changed" [drivers/platform/olpc/olpc-xo175-ec.ko] undefined!
ERROR: "power_supply_get_by_name" [drivers/platform/olpc/olpc-xo175-ec.ko] undefined!
Adding the dependency seems like a more reasonable thing compared to
ifdef-ing the bits, as if one has an XO-1.75 they almost certainly want
a baterry and AC adapter support.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reset the ret variable to make sure it olpc_xo175_ec_cmd() ends up
returning zero on success.
Fixes: 0c3d931b3a ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Building with CONFIG_INPUT set to m:
drivers/platform/olpc/olpc-xo175-ec.o: In function `olpc_xo175_ec_complete':
olpc-xo175-ec.c:(.text+0x75d): undefined reference to `input_event'
olpc-xo175-ec.c:(.text+0x76f): undefined reference to `input_event'
olpc-xo175-ec.c:(.text+0x787): undefined reference to `input_event'
olpc-xo175-ec.c:(.text+0x799): undefined reference to `input_event'
drivers/platform/olpc/olpc-xo175-ec.o: In function `olpc_xo175_ec_probe':
olpc-xo175-ec.c:(.text+0x8d5): undefined reference to `devm_input_allocate_device'
olpc-xo175-ec.c:(.text+0x910): undefined reference to `input_set_capability'
olpc-xo175-ec.c:(.text+0x91c): undefined reference to `input_register_device'
This patch add INPUT dependencies to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0c3d931b3a ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix gcc build error while CONFIG_SPI is not set
drivers/platform/olpc/olpc-xo175-ec.o: In function `olpc_xo175_ec_remove':
olpc-xo175-ec.c:(.text+0x190): undefined reference to `spi_slave_abort'
drivers/platform/olpc/olpc-xo175-ec.o: In function `olpc_xo175_ec_send_command':
olpc-xo175-ec.c:(.text+0x374): undefined reference to `spi_async'
drivers/platform/olpc/olpc-xo175-ec.o: In function `olpc_xo175_ec_cmd':
olpc-xo175-ec.c:(.text+0x8a0): undefined reference to `spi_slave_abort'
drivers/platform/olpc/olpc-xo175-ec.o: In function `olpc_xo175_ec_spi_driver_init':
olpc-xo175-ec.c:(.init.text+0x14): undefined reference to `__spi_register_driver'
We should depends on CONFIG_SPI_SLAVE other than directly select it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0c3d931b3a ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Dell platform team told us that some (DMI whitelisted) Dell Latitude
machines have ST microelectronics accelerometer at I2C address 0x29.
Presence of that ST microelectronics accelerometer is verified by existence
of SMO88xx ACPI device which represent that accelerometer. Unfortunately
ACPI device does not specify I2C address.
This patch registers lis3lv02d device for selected Dell Latitude machines
at I2C address 0x29 after detection. And for Dell Vostro V131 machine at
I2C address 0x1d which was manually detected.
Finally commit a7ae81952c ("i2c: i801: Allow ACPI SystemIO OpRegion to
conflict with PCI BAR") allowed to use i2c-i801 driver on Dell machines so
lis3lv02d correctly initialize accelerometer.
Tested on Dell Latitude E6440.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
you can redistribute and or modify this program under the terms of
the gnu general public license version 2 as published by the free
software foundation this program is distributed in the hope that it
will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details you should have
received a copy of the gnu general public license along with this
program if not write to the free software foundation inc 59 temple
place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.054726165@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
publicshed by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.107748302@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license v2 0 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 23 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.115786599@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license v2 as published
by the free software foundation this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin street fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141334.424952652@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix sparse warning:
drivers/platform/chrome/cros_ec_debugfs.c:256:30: warning: symbol 'cros_ec_console_log_fops' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_debugfs.c:265:30: warning: symbol 'cros_ec_pdinfo_fops' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_lightbar.c:550:24: warning: symbol 'cros_ec_lightbar_attr_group' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_sysfs.c:338:24: warning: symbol 'cros_ec_attr_group' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_vbc.c:104:24: warning: symbol 'cros_ec_vbc_attr_group' was not declared. Should it be static?
drivers/platform/chrome/cros_ec_lpc.c:408:25: warning: symbol 'cros_ec_lpc_pm_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add the ability to extract version information from the EC.
Example Output:
$ cd /sys/bus/platform/devices/GOOG000C:00
$ tail build_date build_revision version model_number
==> build_date <==
04/25/19
==> build_revision <==
d2592cae0
==> version <==
00.00.14
==> model_number <==
08B6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The Wilco Embedded Controller is able to send telemetry data
which is useful for enterprise applications. A daemon running on
the OS sends a command to the EC via a write() to a char device,
and can read the response with a read(). The write() request is
verified by the driver to ensure that it is performing only one
of the whitelisted commands, and that no extraneous data is
being transmitted to the EC. The response is passed directly
back to the reader with no modification.
The character device will appear as /dev/wilco_telemN, where N
is some small non-negative integer, starting with 0. Only one
process may have the file descriptor open at a time. The calling
userspace program needs to keep the device file descriptor open
between the calls to write() and read() in order to preserve the
response. Up to 32 bytes will be available for reading.
For testing purposes, try requesting the EC's firmware build
date, by sending the WILCO_EC_TELEM_GET_VERSION command with
argument index=3. i.e. write [0x38, 0x00, 0x03]
to the device node. An ASCII string of the build date is
returned.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The Wilco Embedded Controller can create custom events that
are not handled as standard ACPI objects. These events can
contain information about changes in EC controlled features,
such as errors and events in the dock or display. For example,
an event is triggered if the dock is plugged into a display
incorrectly. These events are needed for telemetry and
diagnostics reasons, and for possibly alerting the user.
These events are triggered by the EC with an ACPI Notify(0x90),
and then the BIOS reads the event buffer from EC RAM via an
ACPI method. When the OS receives these events via ACPI,
it passes them along to this driver. The events are put into
a queue which can be read by a userspace daemon via a char device
that implements read() and poll(). The event queue acts as a
circular buffer of size 64, so if there are no userspace consumers
the kernel will not run out of memory. The char device will appear at
/dev/wilco_event{n}, where n is some small non-negative integer,
starting from 0. Standard ACPI events such as the battery getting
plugged/unplugged can also come through this path, but they are
dealt with via other paths, and are ignored here.
To test, you can tail the binary data with
$ cat /dev/wilco_event0 | hexdump -ve '1/1 "%x\n"'
and then create an event by plugging/unplugging the battery.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Replacing the old connection descriptions with software node
references. Supplying the USB connector also a reference to
the DisplayPort while at it.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Supplying also external devices, the DisplayPort connector
and the USB role switch, software fwnodes. After this the
driver has access to all the components tied to the USB
Type-C connector and can start creating software node
references to actually associate them with the USB Type-C
connector device.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In ACPI, and now also in DT, the USB connectors usually have
their own device nodes. In case of USB Type-C, those
connector (port) nodes are child nodes of the controller or
PHY device, in our case the fusb302. The software fwnodes
allow us to create a similar child node for fusb302 that
represents the connector also on Intel CHT.
This makes it possible replace the fusb302 specific device
properties which were deprecated with the common USB
connector properties that tcpm.c is able to use directly.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Software nodes provide two features that we will need later.
1) Software nodes can have references to other software nodes.
2) Software nodes can exist before a device entry is created.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Device property "fcs,max-sink-microwatt" is not used in
fusb302.c, so dropping it.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To make the probe function a bit more nicer looking, moving
the registration of max17047 to its own function.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Registering real device entries (struct device) for the mode
muxes as well as for the orientation switches.
The Type-C mux code was deliberately attempting to avoid
creation of separate device entries for the orientation
switch and the mode switch (alternate modes) because they
are not physical devices. They are functions of a single
physical multiplexer/demultiplexer switch device.
Unfortunately because of the dependency we still have on the
underlying mux device driver, we had to put in hacks like
the one in the commit 3e3b81965c ("usb: typec: mux: Take
care of driver module reference counting") to make sure the
driver does not disappear from underneath us. Even with
those hacks we were still left with a potential NUll pointer
dereference scenario, so just creating the device entries,
and letting the core take care of the dependencies. No more
hacks needed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is another set of reviewed patches that adds SPDX tags to different
kernel files, based on a set of rules that are being used to parse the
comments to try to determine that the license of the file is
"GPL-2.0-or-later". Only the "obvious" versions of these matches are
included here, a number of "non-obvious" variants of text have been
found but those have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOgmlw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk4rACfRqxGOGVLR/t6E9dDzOZRAdEz/mYAoJLZmziY
0YlSSSPtP5HI6JDh65Ng
=HXQb
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
Some of Intel Cherrytrail based platforms depend on PMC clock to be always on.
Here couple of quirks to the driver to support affected hardware.
The following is an automated git shortlog grouped by driver:
pmc_atom:
- Add several Beckhoff Automation boards to critclk_systems DMI table
- Add Lex 3I380D industrial PC to critclk_systems DMI table
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAlzoFucACgkQb7wzTHR8
rChADBAAwdNr4g1NaSzOqGymunGN/ENxoWF/i4ABePAuk40OBn13rcZRXB2HDmdo
oH5hbWsRdI/J6y0X8EVtdTjI06JacPbjBA0wsK7A/b/Z61L6WkaRn59/6OpYUbxp
DA26VN6mRuoC7oqG7Qjv+y3KNBK6KV2ocrq9ojtOt14p2W6IkFl6NjD8F5Ug5X8U
tojUlrhSJ3Ivlddvq8ya19vnC5Is8JUaU6yOCbcunNkFtKyAtfl9guAYhpqQkgB8
5Z114BmDH+oyhec/UaCPPAssb2JsmSwpLyIPPIhat0oflTrw7gQsctnSGYsUMuCn
CT4Wlx2Ob0N4nt5GJ62EJ7akgIK5YBRVVqQr7EQXRgAHZAxD45CiNoLK3tDh6ZKn
NA+gWd0D5C9CK4fGtoycxed8UTgJbutgKoIkYqwThMWjMYaR3Tv4G+nM/Oppo6eS
rLjMWUSlXQJyUDWQH5SC5HNFNqlQBueULQDufZwOiQGCDWkLOlvqGA6/yV7YrdwW
x8KQxPJT2nIHam1tQ54alFlCmVrYDlUx3WnEp4HX0mYEMWHbTkLdum0WdraXA6mj
UsgmErOJYeKR6RJPpBsRsfqBSuk8eRGBMdRF0JSMG4sMAA/xqjM9l0kVzXwShFex
L85SFLr+M3sBqb0QdVEkt4j4eFGxsmUVPSyF1lL7k8q0d4XJHAg=
=kEst
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.2-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
"Some of Intel Cherrytrail based platforms depend on PMC clock to be
always on. Here are a couple of quirks to the driver to support
affected hardware"
* tag 'platform-drivers-x86-v5.2-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: pmc_atom: Add several Beckhoff Automation boards to critclk_systems DMI table
platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table
Based on 1 normalized pattern(s):
licensed under the gpl v2 or later
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075210.947402145@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 441 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All currently known ECs in the wild are very sensitive to timing.
Specifically the ECs are known to drop a transfer if more than 8 ms
passes from the assertion of the chip select until the transfer
finishes.
Let's use the new feature introduced in the patch (spi: Allow SPI
devices to request the pumping thread be realtime") to request the SPI
pumping thread be realtime. This means that if we get shunted off to
the SPI thread for whatever reason we won't get downgraded to low
priority.
NOTES:
- We still need to keep ourselves as high priority since the SPI core
doesn't guarantee that all transfers end up on the pumping thread
(in fact, it tries pretty hard to do them in the calling context).
- If future Chrome OS ECs ever fix themselves to be less sensitive
then we could consider adding a property (or compatible string) to
not set this property. For now we need it across the board.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details the full
gnu general public license is included in this distribution in the
file called copying
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.244154651@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin street fifth floor boston ma 02110 1301 usa
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option [no]_[pad]_[ctrl] any later version this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin street fifth floor boston ma
02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 176 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 37a186225a ("platform/chrome: cros_ec_spi: Transfer
messages at high priority") we moved transfers to a high priority
workqueue. This helped make them much more reliable.
...but, we still saw failures.
We were actually finding ourselves competing for time with dm-crypt
which also scheduled work on HIGHPRI workqueues. While we can
consider reverting the change that made dm-crypt run its work at
HIGHPRI, the argument in commit a1b89132dc ("dm crypt: use
WQ_HIGHPRI for the IO and crypt workqueues") is somewhat compelling.
It does make sense for IO to be scheduled at a priority that's higher
than the default user priority. It also turns out that dm-crypt isn't
alone in using high priority like this. loop_prepare_queue() does
something similar for loopback devices.
Looking in more detail, it can be seen that the high priority
workqueue isn't actually that high of a priority. It runs at MIN_NICE
which is _fairly_ high priority but still below all real time
priority.
Should we move cros_ec_spi to real time priority to fix our problems,
or is this just escalating a priority war? I'll argue here that
cros_ec_spi _does_ belong at real time priority. Specifically
cros_ec_spi actually needs to run quickly for correctness. As I
understand this is exactly what real time priority is for.
There currently doesn't appear to be any way to use the standard
workqueue APIs with a real time priority, so we'll switch over to
using using a kthread worker. We'll match the priority that the SPI
core uses when it wants to do things on a realtime thread and just use
"MAX_RT_PRIO - 1".
This commit plus the patch ("platform/chrome: cros_ec_spi: Request the
SPI thread be realtime") are enough to get communications very close
to 100% reliable (the only known problem left is when serial console
is turned on, which isn't something that happens in shipping devices).
Specifically this test case now passes (tested on rk3288-veyron-jerry):
dd if=/dev/zero of=/var/log/foo.txt bs=4M count=512&
while true; do
ectool version > /dev/null;
done
It should be noted that "/var/log" is encrypted (and goes through
dm-crypt) and also passes through a loopback device.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
All OLPC ECs are able to turn the power to the DCON on an off. Use the
regulator framework to expose the functionality.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's based off the driver from the OLPC kernel sources. Somewhat
modernized and cleaned up, for better or worse.
Modified to plug into the olpc-ec driver infrastructure (so that battery
interface and debugfs could be reused) and the SPI slave framework.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Just return EPROBE_DEFER, so that whoever attempted to use the EC call can
defer their work.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move the olpc-ec driver away from the X86 OLPC platform so that it could be
used by the ARM based laptops too. Notably, the driver for the OLPC battery,
which is also used on the ARM models, builds on this driver's interface.
It is actually plaform independent: the OLPC EC commands with their argument
and responses are mostly the same despite the delivery mechanism is
different.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Also, the header is x86 specific, while there are non-x86 OLPC machines.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This driver implements a slim layer to enable the ChromeOS
EC kernel stack (cros_ec) to communicate with ChromeOS EC
firmware running on the Intel Integrated Sensor Hub (ISH).
The driver registers a ChromeOS EC MFD device to connect
with cros_ec kernel stack (upper layer), and it registers a
client with the ISH Transport Protocol bus (lower layer) to
talk with the ISH firwmare. See description of the ISHTP
protocol at Documentation/hid/intel-ish-hid.txt
Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Tested-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The Chrome OS EC driver attaches to devices using the of_match_table
even when ACPI is the underlying firmware. It does this using the
magic PRP0001 ACPI HID, which tells ACPI to go find an OF compatible
string under the hood and match on that.
The cros_ec_spi driver needs to provide the of_match_table regardless
of whether CONFIG_OF is enabled or not, since the table is used by
ACPI for PRP0001 devices.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The 0xF6 command, intended to send and receive 256 byte payloads to
and from the EC, is not needed. The 0xF5 command for 32 byte
payloads is sufficient. This patch removes support for the 0xF6
command and 256 byte payloads.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Boot on AC is a policy which makes the device boot from S5 when AC
power is connected. This is useful for users who want to run their
device headless or with a dock.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
A Property is typically a data item that is stored to NVRAM
by the EC. Each of these data items has an index associated
with it, known as the Property ID (PID). Properties may have
variable lengths, up to a max of WILCO_EC_PROPERTY_MAX_SIZE
bytes. Properties can be simple integers, or they may be more
complex binary data.
This patch adds support for getting and setting properties.
This will be useful for setting the charge algorithm and charge
schedules, which all use properties.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.
This patch does not change any functionality. New functionality will
follow in subsequent patches.
Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.
NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted. This breaks the current
GUP call site convention of having the returned pages be the final
parameter. So the suggestion was rejected.
Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marshall <hubcap@omnibond.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support in code for the new forms of the host sleep event.
Detects the presence of this version of the command at runtime,
and use whichever form the EC supports. At this time, always
request the default timeout, and only report the failing response
via a WARN_ONCE(). Future versions could accept the sleep parameter
from outside the driver, and return the response information to
usermode or elsewhere.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rajat Jain <rajatja@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
CrOS EC:
- Add EC host command support using rpmsg
- Add new CrOS USB PD logging driver
- Transfer spi messages at high priority
- Add support to trace CrOS EC commands
- Minor fixes and cleanups in protocol and debugfs
Wilco EC:
- Standardize Wilco EC mailbox interface
- Add h1_gpio status to debugfs
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlzV61YACgkQHwn1ewov
5lgEFw//S7GVmBrFxcqu5wAjF1CW+mOGi3y6nVuTAHanWG/hJGWT+itOwsdDp6c9
TggYgohprz64JAZOPqPCTonV/qbxgsfKrSQRxFDtHH4F1iEUF46fnlsULDKi8VwM
Qzj4g4d//ePsOwHOsYVrbJRU2qKyF6Rm2hpOxKfI9u2Dv5fxLFu6fxUhrSq1Inr6
U67j7pxBwOnBtN2A6hMKHZaOUVkSNYT6azSPO3Z2YH0aky2Baxw/LPoRnbCNhwUQ
iyneX5+K0wpCz2fpnBF/QSh1QBACeyfrO6HHA+flfaejhShaWttrS36Gar+sdHFN
p6eeR1CoEJZbRY79Eetj8Cv5Be1ivVG/SC5JF4O1apAAn87wXLI6AaLG/03ul0vc
KOkcjrXMxISRlAUr+OKD0rg3Uo2oI0ht70XMT9DDsCRNDoVHvkDQJNdkWrKq+E1c
xL4YeLofZpcEN+Oe/WnwUZtYUdY3qcWs+C4hV+h0L0Ke5xir25DEUfF3j3J/uK2B
JEgkTpH8j6YjbGAErBPkTxWt5HE3oWtkK4moPlrfPKfxoSo2eRDvqz68qHsgIn8p
WBM+FSr+dQ7qyYDigMKrFSesiBpwCBI4lIgPxkvTxqbubaoZcsABHm3BUGjykXII
E5z2qsgRnDrB+uGGDkTvDoR0Kr3U0hGlag7u/N61H86PoiMLUig=
=NF5N
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"CrOS EC:
- Add EC host command support using rpmsg
- Add new CrOS USB PD logging driver
- Transfer spi messages at high priority
- Add support to trace CrOS EC commands
- Minor fixes and cleanups in protocol and debugfs
Wilco EC:
- Standardize Wilco EC mailbox interface
- Add h1_gpio status to debugfs"
* tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_proto: Add trace event to trace EC commands
platform/chrome: cros_ec_debugfs: Use cros_ec_cmd_xfer_status helper
platform/chrome: cros_ec: Add EC host command support using rpmsg
platform/chrome: wilco_ec: Add h1_gpio status to debugfs
platform/chrome: wilco_ec: Standardize mailbox interface
platform/chrome: cros_ec_proto: check for NULL transfer function
platform/chrome: Add CrOS USB PD logging driver
platform/chrome: cros_ec_spi: Transfer messages at high priority
platform/chrome: cros_ec_debugfs: no need to check return value of debugfs_create functions
platform/chrome: cros_ec_debugfs: Remove dev_warn when console log is not supported
New driver of power button for Basin Cove PMIC.
ASUS WMI driver has got a Fn lock mode switch support.
Resolve a never end story with non working Wi-Fi on newer Lenovo Ideapad
computers. Now the black list is replaced with white list.
New facility to debug S0ix failures on Intel Atom platforms. The Intel PMC
and accompanying drivers are cleaned up.
Mellanox got a new TmFifo driver. Besides tachometer sensor and watchdog
are enabled on Mellanox platforms.
The information of embedded controller is now recognized on new Thinkpads.
Bluetooth driver on Thinkpads is blacklisted for some models.
Touchscreen DMI driver extended to support 'jumper ezpad 6 pro b' and
Myria MY8307 2-in-1.
Additionally few small fixes here and there for WMI and ACPI laptop drivers.
The following is an automated git shortlog grouped by driver:
alienware-wmi:
- printing the wrong error code
- fix kfree on potentially uninitialized pointer
asus-wmi:
- Add fn-lock mode switch support
dell-laptop:
- fix rfkill functionality
dell-rbtn:
- Add missing #include
ideapad-laptop:
- Remove no_hw_rfkill_list
intel_pmc_core:
- Allow to dump debug registers on S0ix failure
- Convert to a platform_driver
- Mark local function static
intel_pmc_ipc:
- Don't map non-used optional resources
- Apply same width for offset definitions
- Use BIT() macro
- adding error handling
intel_punit_ipc:
- Revert "Fix resource ioremap warning"
mlx-platform:
- Add mlx-wdt platform driver activation
- Add support for tachometer speed register
- Add TmFifo driver for Mellanox BlueField Soc
sony-laptop:
- Fix unintentional fall-through
thinkpad_acpi:
- cleanup for Thinkpad ACPI led
- Mark expected switch fall-throughs
- fix spelling mistake "capabilites" -> "capabilities"
- Read EC information on newer models
- Disable Bluetooth for some machines
touchscreen_dmi:
- Add info for 'jumper ezpad 6 pro b' touchscreen
- Add info for Myria MY8307 2-in-1
-----BEGIN PGP SIGNATURE-----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=5b//
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
"Gathered pile of patches for Platform Drivers x86. No surprises and no
merge conflicts. Business as usual.
Summary:
- New driver of power button for Basin Cove PMIC.
- ASUS WMI driver has got a Fn lock mode switch support.
- Resolve a never end story with non working Wi-Fi on newer Lenovo
Ideapad computers. Now the black list is replaced with white list.
- New facility to debug S0ix failures on Intel Atom platforms. The
Intel PMC and accompanying drivers are cleaned up.
- Mellanox got a new TmFifo driver. Besides tachometer sensor and
watchdog are enabled on Mellanox platforms.
- The information of embedded controller is now recognized on new
Thinkpads. Bluetooth driver on Thinkpads is blacklisted for some
models.
- Touchscreen DMI driver extended to support 'jumper ezpad 6 pro b'
and Myria MY8307 2-in-1.
- Additionally few small fixes here and there for WMI and ACPI laptop
drivers.
- The following is an automated git shortlog grouped by driver:
- alienware-wmi:
- printing the wrong error code
- fix kfree on potentially uninitialized pointer
- asus-wmi:
- Add fn-lock mode switch support
- dell-laptop:
- fix rfkill functionality
- dell-rbtn:
- Add missing #include
- ideapad-laptop:
- Remove no_hw_rfkill_list
- intel_pmc_core:
- Allow to dump debug registers on S0ix failure
- Convert to a platform_driver
- Mark local function static
- intel_pmc_ipc:
- Don't map non-used optional resources
- Apply same width for offset definitions
- Use BIT() macro
- adding error handling
- intel_punit_ipc:
- Revert "Fix resource ioremap warning"
- mlx-platform:
- Add mlx-wdt platform driver activation
- Add support for tachometer speed register
- Add TmFifo driver for Mellanox BlueField Soc
- sony-laptop:
- Fix unintentional fall-through
- thinkpad_acpi:
- cleanup for Thinkpad ACPI led
- Mark expected switch fall-throughs
- fix spelling mistake "capabilites" -> "capabilities"
- Read EC information on newer models
- Disable Bluetooth for some machines
- touchscreen_dmi:
- Add info for 'jumper ezpad 6 pro b' touchscreen
- Add info for Myria MY8307 2-in-1"
* tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86: (26 commits)
platform/x86: Add support for Basin Cove power button
platform/x86: asus-wmi: Add fn-lock mode switch support
platform/x86: ideapad-laptop: Remove no_hw_rfkill_list
platform/x86: touchscreen_dmi: Add info for 'jumper ezpad 6 pro b' touchscreen
platform/x86: thinkpad_acpi: cleanup for Thinkpad ACPI led
platform/x86: thinkpad_acpi: Mark expected switch fall-throughs
platform/x86: sony-laptop: Fix unintentional fall-through
platform/x86: alienware-wmi: printing the wrong error code
platform/x86: intel_pmc_core: Allow to dump debug registers on S0ix failure
platform/x86: intel_pmc_core: Convert to a platform_driver
platform/x86: mlx-platform: Add mlx-wdt platform driver activation
platform/x86: mlx-platform: Add support for tachometer speed register
platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc
platform/x86: thinkpad_acpi: fix spelling mistake "capabilites" -> "capabilities"
platform/x86: intel_punit_ipc: Revert "Fix resource ioremap warning"
platform/x86: intel_pmc_ipc: Don't map non-used optional resources
platform/x86: intel_pmc_ipc: Apply same width for offset definitions
platform/x86: intel_pmc_ipc: Use BIT() macro
platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer
platform/x86: dell-laptop: fix rfkill functionality
...
This provides a new input driver for supporting the power button on
Basin Cove PMIC, found on Intel Merrifield-based devices.
The driver follows the design used in intel_chtdc_ti_pwrbtn.c module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some of latest ASUS laptops support new fn-lock mode switching.
This commit detect whether if the fn-lock option is enabled in
BIOS setting, and toggle the fn-lock mode via a new WMI DEVID
0x00100023 when the corresponding notify code captured.
The ASUS fn-lock mode switch is activated by pressing Fn+Esc.
When on, keys F1 to F12 behave as applicable, with meanings
defined by the application being used at the time. When off,
F1 to F12 directly triggers hardware features, well known audio
volume up/down, brightness up/down...etc, which were triggered
by holding down Fn key and F-keys.
Because there's no way to retrieve the fn-lock mode via existing
WMI methods per ASUS spec, driver need to initialize and keep the
fn-lock mode by itself.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When the ideapad-laptop driver was first written it was written for laptops
which had a hardware rfkill switch. So when the first ideapad laptops
showed up without a hw rfkill switch and it turned out that in this case
the ideapad firmware interface would always report the wifi being hardware-
blocked, a DMI id list of models which lack a hw rfkill switch was started
(by yours truly). Things were done this way to avoid regressing existing
models with a hw rfkill switch. In hindsight this was a mistake.
Lenovo releases a lot of ideapad models every year and even the latest
models still use the "VPC2004" ACPI interface the ideapad-laptop driver
binds to. Having a hw rfkill switch is quite rare on modern hardware, so
all these new models need to be added to the no_hw_rfkill_list, leading
to a never ending game of whack a mole.
Worse the failure mode when not present on the list, is very bad. In this
case the ideapad-laptop driver will report the wifi as being hw-blocked,
at which points NetworkManager does not even try to use it and the user
ends up with non working wifi.
This leads to various Linux fora on the internet being filled with
wifi not working on ideapad laptops stories, which does not make Linux
look good.
The failure mode when we flip the default to assuming that a hw rfkill
switch is not present OTOH is quite benign. When we properly report the
wifi as being hw-blocked on ideapads which do have the hw-switch; and it
is in the wifi-off position, then at least when using NetworkManager +
GNOME3 the user will get a "wifi disabled in hardware" message when trying
to connect to the wifi from the UI. If OTOH we assume there is no hardware
rfkill switch, then the user will get an empty list for the list of
available networks. Although the empty list vs the "wifi disabled in
hardware" message is a regression, it is a very minor regression and it
can easily be fixed on a model by model basis by filling the new
hw_rfkill_list this commit introduces.
Therefor this commit removes the ever growing no_hw_rfkill_list, flipping
the default to assuming there is no hw rfkill switch and adding a new
hw_rfkill_list. Thereby fixing the wifi not working on all the current
ideapad and yoga models which are not on the list yet and also fixing it
for all future ideapad and yoga models using the "VPC2004" ACPI interface.
Note once this patch has been accepted upstream. I plan to write a blog
post asking for users of ideapads and yoga's with a hw rfkill switch to
step forward, so that we can populate the new hw_rfkill_list with the few
older yoga and ideapad models which actually have a hw rfkill switch.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1703338
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen platform data for the 'jumper ezpad 6 pro b' touchscreen.
Signed-off-by: Benjamin Renz <appswert@gmail.com>
[hdegoede@redhat.com: Cleanup commit msg, fix some checkpatch warnings]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make error returns more consistent... no behaviour change intended.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/platform/x86/thinkpad_acpi.c: In function ‘thermal_get_sensor’:
drivers/platform/x86/thinkpad_acpi.c:6316:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (idx >= 8 && idx <= 15) {
^
drivers/platform/x86/thinkpad_acpi.c:6322:2: note: here
case TPACPI_THERMAL_TPEC_8:
^~~~
drivers/platform/x86/thinkpad_acpi.c: In function ‘hotkey_notify’:
drivers/platform/x86/thinkpad_acpi.c:4208:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (tp_features.hotkey_wlsw &&
^
drivers/platform/x86/thinkpad_acpi.c:4216:3: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comments are modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It seems that the default case should return AE_CTRL_TERMINATE, instead
of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK;
otherwise the line of code at the end of the function is unreachable and
makes no sense:
return AE_CTRL_TERMINATE;
This fix is based on the following thread of discussion:
https://lore.kernel.org/patchwork/patch/959782/
Fixes: 33a0445452 ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The "out_data" variable is uninitialized at the point. Originally, this
used to print "status" instead and that seems like the correct thing to
print.
Fixes: bc2ef88432 ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a module parameter which when enabled, will check on resume, if the
last S0ix attempt was successful. If not, the driver would warn and provide
helpful debug information (which gets latched during the failed suspend
attempt) to debug the S0ix failure.
This information is very useful to debug S0ix failures. Specially since
the latched debug information will be lost (over-written) if the system
attempts to go into runtime (or imminent) S0ix again after that failed
suspend attempt.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert the intel_pmc_core driver to a platform driver. There is no
functional change to the driver, or to the way the devices are
instantiated.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add mlx-wdt platform driver activation. Watchdog driver uses the same
regmap infrastructure as others Mellanox platform drivers. Specific
registers description for watchdog platform data configuration are
added to mlx-platform. There are the registers for watchdog timer
manipulation, and action setting on watchdog timer expiration.
The watchdog action function could be configured to perform one of the
following: system reset, setting PWM to full speed or counter
increment.
Two types of watchdog devices are supported main and auxiliary.
These devices are co-exist and each of them could be configured to
handle the specific action.
Signed-off-by: Michael Shych <michealsh@mellanox.com>
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for tachometer speed register for the next generation
systems MQMB7xx, MSN37xx, MSN34xx, MSN38xx.
All these systems support tachometer speed capability register.
This register is to be provided mlxreg-fan driver.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This commit adds the TmFifo platform driver for Mellanox BlueField
Soc. TmFifo is a shared FIFO which enables external host machine
to exchange data with the SoC via USB or PCIe. The driver is based
on virtio framework and has console and network access enabled.
Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is a spelling mistake in a module parameter description. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since we have a proper fix for intel_pmc_ipc driver for resource management,
get rid of unneeded commit in the intel_punit_ipc driver.
This reverts commit 6cc8cbbc88.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
The intel_pmc_ipc driver has a placeholder for all possible resources
that may have been provided by ACPI. Since there are few optional ones,
the driver still uses them and binds to wrong ranges in resource tree:
# grep intel_punit_ipc /proc/iomem
00000000-00000000 : intel_punit_ipc
00000000-00000000 : intel_punit_ipc
00000000-00000000 : intel_punit_ipc
00000000-00000000 : intel_punit_ipc
This leads to issues with resource management during inserting and
removing modules, such as intel_pmc_ipc itself, which can't be inserted
anymore after first removal.
Count the actual resources provided and supply only them to the child device.
This is a real fix of the commit 8cc7fb4a65
("intel_pmc_ipc: update acpi resource structure for Punit")
that also fixes a symptoms described in the commit 6cc8cbbc88
("platform/x86: intel_punit_ipc: Fix resource ioremap warning")
that is going to be reverted afterwards.
Reported-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Qipeng Zha <qipeng.zha@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Apply same width for offset definitions to make code more consistent.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use BIT() and BIT_MASK() macros for definitions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af34
("fs: stream_open - opener for stream-like files so that read and write
can run simultaneously without deadlock"), search and convert to
stream_open all in-kernel nonseekable_open users for which read and
write actually do not depend on ppos and where there is no other methods
in file_operations which assume @offset access.
I've verified each generated change manually - that it is correct to convert -
and each other nonseekable_open instance left - that it is either not correct
to convert there, or that it is not converted due to current stream_open.cocci
limitations. The script also does not convert files that should be valid to
convert, but that currently have .llseek = noop_llseek or generic_file_llseek
for unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)
Among cases converted 14 were potentially vulnerable to read vs write deadlock
(see details in 10dce8af34):
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix.
and the rest were just safe to convert to stream_open because their read and
write do not use ppos at all and corresponding file_operations do not
have methods that assume @offset file access(*):
arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open.
drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open.
sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open.
One can also recheck/review the patch via generating it with explanation comments included via
$ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain"
(*) This second group also contains cases with read/write deadlocks that
stream_open.cocci don't yet detect, but which are still valid to convert to
stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c
calls wait_for_completion_interruptible() in its .read, but stream_open.cocci
currently detects only "wait_event*" as blocking.
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs]
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Jean Delvare <jdelvare@suse.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*]
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec]
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec]
Cc: Benson Leung <bleung@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome]
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*]
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Zwane Mwaikambo <zwanem@gmail.com>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Use new helper pci_dev_id() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Benson Leung <bleung@chromium.org>
This is useful to see which EC commands are being executed and when.
To enable:
echo 1 > /sys/kernel/debug/tracing/events/cros_ec/enable
Example:
cros_ec_cmd: version: 0, command: EC_CMD_GET_VERSION
cros_ec_cmd: version: 0, command: EC_CMD_GET_PROTOCOL_INFO
cros_ec_cmd: version: 1, command: EC_CMD_GET_CMD_VERSIONS
cros_ec_cmd: version: 1, command: EC_CMD_USB_PD_CONTROL
The list of current commands is generated using the following script:
sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1),\\/p' include/linux/mfd/cros_ec_commands.h
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer() so we can remove some redundant code.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Currently the kfree of output.pointer can be potentially freeing
an uninitalized pointer in the case where out_data is NULL. Fix this
by reworking the case where out_data is not-null to perform the
ACPI status check and also the kfree of outpoint.pointer in one block
and hence ensuring the pointer is only freed when it has been used.
Also replace the if (ptr != NULL) idiom with just if (ptr).
Fixes: ff0e9f2628 ("platform/x86: alienware-wmi: Correct a memory leak")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
When converting the driver two arguments were transposed leading
to rfkill not working.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201427
Reported-by: Pepijn de Vos <pepijndevos@gmail.com>
Fixes: 549b49 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls")
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Cc: <stable@vger.kernel.org> # 4.14.x
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
tests, we need to ensure that the H1 chip is properly setting
some GPIO lines. The h1_gpio attribute exposes the state
of the lines:
- ENTRY_TO_FACT_MODE in BIT(0)
- SPI_CHROME_SEL in BIT(1)
There are two reasons that I am exposing this in debugfs,
and not as a GPIO:
1. This is only useful for testing, so end users shouldn't ever
care about this. In fact, if it passes the tests, then the value of
h1_gpio will always be 2, so it would be really uninteresting for users.
2. This GPIO is not connected to, controlled by, or really even related
to the AP. The GPIO runs between the EC and the H1 security chip.
Changes in v4:
- Use "0x02x\n" instead of "02x\n" for format string
- Use DEFINE_DEBUGFS_ATTRIBUTE()
- Add documentation
Changes in v3:
- Fix documentation to correspond with formatting change in v2.
Changes in v2:
- Zero out the unused fields in the request.
- Format result as "%02x\n" instead of as a decimal.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The current API for the wilco EC mailbox interface is bad.
It assumes that most messages sent to the EC follow a similar structure,
with a command byte in MBOX[0], followed by a junk byte, followed by
actual data. This doesn't happen in several cases, such as setting the
RTC time, using the raw debugfs interface, and reading or writing
properties such as the Peak Shift policy (this last to be submitted soon).
Similarly for the response message from the EC, the current interface
assumes that the first byte of data is always 0, and the second byte
is unused. However, in both setting and getting the RTC time, in the
debugfs interface, and for reading and writing properties, this isn't
true.
The current way to resolve this is to use WILCO_EC_FLAG_RAW* flags to
specify when and when not to skip these initial bytes in the sent and
received message. They are confusing and used so much that they are
normal, and not exceptions. In addition, the first byte of
response in the debugfs interface is still always skipped, which is
weird, since this raw interface should be giving the entire result.
Additionally, sent messages assume the first byte is a command, and so
struct wilco_ec_message contains the "command" field. In setting or
getting properties however, the first byte is not a command, and so this
field has to be filled with a byte that isn't actually a command. This
is again inconsistent.
wilco_ec_message contains a result field as well, copied from
wilco_ec_response->result. The message result field should be removed:
if the message fails, the cause is already logged, and the callers are
alerted. They will never care about the actual state of the result flag.
These flags and different cases make the wilco_ec_transfer() function,
used in wilco_ec_mailbox(), really gross, dealing with a bunch of
different cases. It's difficult to figure out what it is doing.
Finally, making these assumptions about the structure of a message make
it so that the messages do not correspond well with the specification
for the EC's mailbox interface. For instance, this interface
specification may say that MBOX[9] in the received message contains
some information, but the calling code needs to remember that the first
byte of response is always skipped, and because it didn't set the
RESPONSE_RAW flag, the next byte is also skipped, so this information
is actually contained within wilco_ec_message->response_data[7]. This
makes it difficult to maintain this code in the future.
To fix these problems this patch standardizes the mailbox interface by:
- Removing the WILCO_EC_FLAG_RAW* flags
- Removing the command and reserved_raw bytes from wilco_ec_request
- Removing the mbox0 byte from wilco_ec_response
- Simplifying wilco_ec_transfer() because of these changes
- Gives the callers of wilco_ec_mailbox() the responsibility of exactly
and consistently defining the structure of the mailbox request and
response
- Removing command and result from wilco_ec_message.
This results in the reduction of total code, and makes it much more
maintainable and understandable.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.
If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.
Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
