This function is only used via function pointer.
"inline" doesn't hurt given that taking address of an inline function
forces out-of-line version but it doesn't help either.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add casts to fix these warnings:
./usr/include/linux/netfilter_arp/arp_tables.h:200:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/netfilter_bridge/ebtables.h:197:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/netfilter_ipv4/ip_tables.h:223:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/netfilter_ipv6/ip6_tables.h:263:19: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/tipc_config.h:310:28: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/tipc_config.h:410:24: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
./usr/include/linux/virtio_ring.h:170:16: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
Those are theoretical probably but kernel doesn't control compiler flags
in userspace.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: phy: broadcom: RGMII delays fixes
This patch series fixes the BCM54210E RGMII delay configuration which
could only have worked in a PHY_INTERFACE_MODE_RGMII configuration.
There is a forward declaration added such that the first patch can be
picked up for -stable and apply fine all the way back to when the bug
was introduced.
The second patch eliminates duplicated code that used a different kind
of logic and did not use existing constants defined.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bcm54612e_config_init() duplicates what bcm54xx_config_clock_delay()
does with respect to configuring RGMII TX/RX delays appropriately.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0fc9ae1076 ("net: phy: broadcom: add support for
BCM54210E") added support for BCM54210E but also unconditionally cleared
the RXC to RXD skew and the TXD to TXC skew, thus only making
PHY_INTERFACE_MODE_RGMII a possible configuration. Use
bcm54xx_config_clock_delay() which correctly sets the registers
depending on the 4 possible PHY interface values that exist for RGMII.
Fixes: 0fc9ae1076 ("net: phy: broadcom: add support for BCM54210E")
Reported-by: Manasa Mudireddy <manasa.mudireddy@broadcom.com>
Reported-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
net/tls: separate the TLS TOE code out
We have 3 modes of operation of TLS - software, crypto offload
(Mellanox, Netronome) and TCP Offload Engine-based (Chelsio).
The last one takes over the socket, like any TOE would, and
is not really compatible with how we want to do things in the
networking stack.
Confusingly the name of the crypto-only offload mode is TLS_HW,
while TOE-offload related functions use tls_hw_ as their prefix.
Engineers looking to implement offload are also be faced with
TOE artefacts like struct tls_device (while, again,
CONFIG_TLS_DEVICE actually gates the non-TOE offload).
To improve the clarity of the offload code move the TOE code
into new files, and rename the functions and structures
appropriately.
Because TOE-offload takes over the socket, and makes no use of
the TLS infrastructure in the kernel, the rest of the code
(anything beyond the ULP setup handlers) do not have to worry
about the mode == TLS_HW_RECORD case.
The increase in code size is due to duplication of the full
license boilerplate. Unfortunately original author (Dave Watson)
seems unreachable :(
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS "record layer offload" requires TOE, and bypasses most of
the normal networking stack. It is also significantly less
maintained. Allow users to compile it out to avoid issues.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tls_hw_* functions are quite confusingly named, since they
are related to the TOE-offload, not TLS_HW offload which doesn't
require TOE. Rename them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move tls_hw_* functions to a new, separate source file
to avoid confusion with normal, non-TOE offload.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move tls_build_proto() so that TOE offload doesn't have to call it
mid way through its bypass enable path.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename struct tls_device to struct tls_toe_device to avoid
confusion with normal, non-TOE offload.
No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move tls_device structure and register/unregister functions
to a new header to avoid confusion with normal, non-TOE offload.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was supposed to be a trace indicating that a new peer had been
created. Add it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
devlink: allow devlink instances to change network namespace
Devlink from the beginning counts with network namespaces, but the
instances has been fixed to init_net.
Implement change of network namespace as part of "devlink reload"
procedure like this:
$ ip netns add testns1
$ devlink/devlink dev reload netdevsim/netdevsim10 netns testns1
This command reloads device "netdevsim10" into network
namespace "testns1".
Note that "devlink reload" reinstantiates driver objects, effectively it
reloads the driver instance, including possible hw reset etc. Newly
created netdevices respect the network namespace of the parent devlink
instance and according to that, they are created in target network
namespace.
Driver is able to refuse to be reloaded into different namespace. That
is the case of mlx4 right now.
FIB entries and rules are replayed during FIB notifier registration
which is triggered during reload (driver instance init). FIB notifier
is also registered to the target network namespace, that allows user
to use netdevsim devlink resources to setup per-namespace limits of FIB
entries and FIB rules. In fact, with multiple netdevsim instances
in each network namespace, user might setup different limits.
This maintains and extends current netdevsim resources behaviour.
Patch 1 prepares netdevsim code for the follow-up changes in the
patchset. It does not change the behaviour, only moves pet-init_netns
accounting to netdevsim instance, which is also in init_netns.
Patches 2-5 prepare the FIB notifier making it per-netns and to behave
correctly upon error conditions.
Patch 6 just exports a devlink_net helper so it can be used in drivers.
Patches 7-9 do preparations in mlxsw driver.
Patches 10-13 do preparations in netdevsim driver, namely patch 12
implements proper devlink reload where the driver instance objects are
actually re-created as they should be.
Patch 14 actually implements the possibility to reload into a different
network namespace.
Patch 15 adds needed selftests for devlink reload into namespace for
netdevsim driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add couple of tests for devlink reload testing and also resource
limitations testing, along with devlink reload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All devlink instances are created in init_net and stay there for a
lifetime. Allow user to be able to move devlink instances into
namespaces during devlink reload operation. That ensures proper
re-instantiation of driver objects, including netdevices.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow-up patch is going to allow to reload devlink instance into
different network namespace, so use devlink_net() helper instead
of init_net.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register newly created port netdevice into net namespace
that the parent device belongs to.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During devlink reload, all driver objects should be reinstantiated with
the exception of devlink instance and devlink resources and params.
Move existing devlink_resource_size_get() calls into fib_create() just
before fib notifier is registered. Also, make sure that extack is
propagated down to fib_notifier_register() call.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the probe/remove function does this separately. Put the
addition an deletion of ports into nsim_dev_create() and
nsim_dev_destroy().
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the devlink reaload the extack is present, so propagate it all
the way down to register_fib_notifier() call in spectrum_router.c.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating netdevices for ports, put them under network namespace
that the core/parent devlink belongs to.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow-up patch is going to allow to reload devlink instance into
different network namespace, so use devlink_net() helper instead
of init_net.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow drivers to get net struct for devlink instance.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since errors are propagated all the way up to the caller, propagate
possible extack of the caller all the way down to the notifier block
callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently if info->extack is NULL, mlxsw assumes that the event came
down from dump. Originally, the dump did not propagate the return value
back to the original caller (fib_notifier_register()). However, that is
now happening. So benefit from this and push the error up if it happened.
Remove rule cases in work handlers that are now dead code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike events for registered notifier, during the registration, the
errors that happened for the block being registered are not propagated
up to the caller. Make sure the error is propagated for FIB rules and
entries.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all users of FIB notifier only cares about events in init_net.
Later in this patchset, users get interested in other namespaces too.
However, for every registered block user is interested only about one
namespace. Make the FIB notifier registration per-netns and avoid
unnecessary calls of notifier block for other namespaces.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the accounting is done per-namespace. However, devlink
instance is always in init_net namespace for now, so only the accounting
related to init_net is used. Limitations set using devlink resources
are only considered for init_net. nsim_devlink_net() always
returns init_net always.
Make the accounting per-device. This brings no functional change.
Per-device accounting has the same values as per-net.
For a single netdevsim instance, the behaviour is exactly the same
as before. When multiple netdevsim instances are created, each
can have different limits.
This is in prepare to implement proper devlink netns support. After
that, the devlink instance which would exist in particular netns would
account and limit that netns.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel says:
====================
phy: at803x: add ar9331 support
changes v3:
- use PHY_ID_MATCH_EXACT only for ATH9331 PHY
changes v2:
- use PHY_ID_MATCH_EXACT instead of leaky masking
- remove probe and struct at803x_priv
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
struct at803x_priv is never used in this driver. So remove it
and the probe function allocating it.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mostly this hardware can work with generic PHY driver, but this change
is needed to provided interrupt handling support.
Tested with dsa ar9331-switch driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mlxsw distributes sent traffic among all the available send
queues. That includes control traffic as well as EMADs, which are used for
configuration of the device.
However because all the queues have the same traffic class of 3, they all
end up being directed to the same traffic class buffer. If the control
traffic in the buffer cannot be serviced quickly enough, the EMAD traffic
might be shut out, which causes transient failures, typically in FDB
maintenance, counter upkeep and other periodic work.
To address this issue, dedicate SDQ 0 to EMAD traffic, with TC 0.
Distribute the control traffic among the remaining queues, which are left
with their current TC 3.
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, RDS calls ib_dma_alloc_coherent() to allocate a large piece
of contiguous DMA coherent memory to store struct rds_header for
sending/receiving packets. The memory allocated is then partitioned
into struct rds_header. This is not necessary and can be costly at
times when memory is fragmented. Instead, RDS should use the DMA
memory pool interface to handle this. The DMA addresses of the pre-
allocated headers are stored in an array. At send/receive ring
initialization and refill time, this arrary is de-referenced to get
the DMA addresses. This array is not accessed at send/receive packet
processing.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thierry Reding says:
====================
net: stmmac: Enhanced addressing mode for DWMAC 4.10
The DWMAC 4.10 supports the same enhanced addressing mode as later
generations. Parse this capability from the hardware feature registers
and set the EAME (Enhanced Addressing Mode Enable) bit when necessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The address width of the controller can be read from hardware feature
registers much like on XGMAC. Add support for parsing the ADDR64 field
so that the DMA mask can be set accordingly.
This avoids getting swiotlb involved for DMA on Tegra186 and later.
Also make sure that the upper 32 bits of the DMA address are written to
the DMA descriptors when enhanced addressing mode is used. Similarily,
for each channel, the upper 32 bits of the DMA descriptor ring's base
address also need to be programmed to make sure the correct memory can
be fetched when the DMA descriptor ring is located beyond the 32-bit
boundary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enhanced addressing mode is only required when more than 32 bits need to
be addressed. Add a DMA configuration parameter to enable this mode only
when needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checkpatch throws warnings for function pointer declarations which lack
identifier names.
An example of such a warning is:
WARNING: function definition argument 'struct r8152 *' should
also have an identifier name
739: FILE: drivers/net/usb/r8152.c:739:
+ void (*init)(struct r8152 *);
So, fix those warnings by adding the identifier names.
While we are at it, also fix a character limit violation which was
causing another checkpatch warning.
Change-Id: Idec857ce2dc9592caf3173188be1660052c052ce
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Log vendor error if work requests fail. Vendor error provides
more information that is used for debugging the issue.
Signed-off-by: Sudhakar Dindukurti <sudhakar.dindukurti@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recycling in mvpp2 has gone long time ago, but two comment still refers
to it. Remove those two misleading comments as they generate confusion.
Fixes: 7ef7e1d949 ("net: mvpp2: drop useless fields in mvpp2_bm_pool and related code")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap says:
====================
CAIF Kconfig fixes
This series of patches cleans up the CAIF Kconfig menus in
net/caif/Kconfig and drivers/net/caif/Kconfig and also puts the
CAIF Transport drivers into their own sub-menu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor fixes to the CAIF Transport drivers Kconfig file:
- end sentence with period
- capitalize CAIF acronym
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Isolate CAIF transport drivers into their own menu.
This cleans up the main Network device support menu,
makes it easier to find the CAIF drivers, and makes it
easier to enable/disable them as a group.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up the net/caif/Kconfig menu:
- remove extraneous space
- minor language tweaks
- fix punctuation
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The introduction of this schedule point was done in commit
2ba2506ca7 ("[NET]: Add preemption point in qdisc_run")
at a time the loop was not bounded.
Then later in commit d5b8aa1d24 ("net_sched: fix dequeuer fairness")
we added a limit on the number of packets.
Now is the time to remove the schedule point, since the default
limit of 64 packets matches the number of packets a typical NAPI
poll can process in a row.
This solves a latency problem for most TCP receivers under moderate load :
1) host receives a packet.
NET_RX_SOFTIRQ is raised by NIC hard IRQ handler
2) __do_softirq() does its first loop, handling NET_RX_SOFTIRQ
and calling the driver napi->loop() function
3) TCP stores the skb in socket receive queue:
4) TCP calls sk->sk_data_ready() and wakeups a user thread
waiting for EPOLLIN (as a result, need_resched() might now be true)
5) TCP cooks an ACK and sends it.
6) qdisc_run() processes one packet from qdisc, and sees need_resched(),
this raises NET_TX_SOFTIRQ (even if there are no more packets in
the qdisc)
Then we go back to the __do_softirq() in 2), and we see that new
softirqs were raised. Since need_resched() is true, we end up waking
ksoftirqd in this path :
if (pending) {
if (time_before(jiffies, end) && !need_resched() &&
--max_restart)
goto restart;
wakeup_softirqd();
}
So we have many wakeups of ksoftirqd kernel threads,
and more calls to qdisc_run() with associated lock overhead.
Note that another way to solve the issue would be to change TCP
to first send the ACK packet, then signal the EPOLLIN,
but this changes P99 latencies, as sending the ACK packet
can add a long delay.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct __dsa_skb_cb is supposed to span the entire 48-byte skb
control block, while the struct dsa_skb_cb only the portion of it which
is used by the DSA core (the rest is available as private data to
drivers).
The DSA_SKB_CB and __DSA_SKB_CB helpers are supposed to help retrieve
this pointer based on a skb, but it turns out there is nobody directly
interested in the struct __dsa_skb_cb in the kernel. So remove it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
SJA1105 DSA coding style cleanup
This series provides some mechanical cleanup patches related to function
names and prototypes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The most commonly called function in the driver is long due for a
rename. The "packed" word is redundant (it doesn't make sense to
transfer an unpacked structure, since that is in CPU endianness yadda
yadda), and the "spi" word is also redundant since argument 2 of the
function is SPI_READ or SPI_WRITE.
As for the sja1105_spi_send_long_packed_buf function, it is only being
used from sja1105_spi.c, so remove its global prototype.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
