Pull seccomp updates from James Morris:
- Add SECCOMP_RET_USER_NOTIF
- seccomp fixes for sparse warnings and s390 build (Tycho)
* 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp, s390: fix build for syscall type change
seccomp: fix poor type promotion
samples: add an example of seccomp user trap
seccomp: add a return code to trap to userspace
seccomp: switch system call argument type to void *
seccomp: hoist struct seccomp_data recalculation higher
- Replace global vfio-pci lock with per bus lock to allow concurrent
open and release (Alex Williamson)
- Declare mdev function as static (Paolo Cretaro)
- Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=HOtX
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Replace global vfio-pci lock with per bus lock to allow concurrent
open and release (Alex Williamson)
- Declare mdev function as static (Paolo Cretaro)
- Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor)
* tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio:
vfio-mdev/samples: Use u8 instead of char for handle functions
vfio/mdev: add static modifier to add_mdev_supported_type
vfio/pci: Parallelize device open and release
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
These explicit rules are unneeded because scripts/Makefile.build
provides a pattern rule to create %.s from %.c
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
kzalloc() return should always be checked - notably in example code
where this may be seen as reference. On failure of allocation in
livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous
allocation is freed (thanks to Petr Mladek <pmladek@suse.com> for
catching this) and NULL returned.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 439e7271dc ("livepatch: introduce shadow variable API")
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Clang warns:
samples/vfio-mdev/mtty.c:592:39: warning: implicit conversion from 'int'
to 'char' changes value from 162 to -94 [-Wconstant-conversion]
*buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD;
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
1 warning generated.
Turns out that all uses of buf in this function ultimately end up stored
or cast to an unsigned type. Just use u8, which has the same number of
bits but can store this larger number so Clang no longer warns.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The idea here is just to give a demonstration of how one could safely use
the SECCOMP_RET_USER_NOTIF feature to do mount policies. This particular
policy is (as noted in the comment) not very interesting, but it serves to
illustrate how one might apply a policy dodging the various TOCTOU issues.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
When NULL pointer accidentally passed to write_kprobe_events,
due to strlen(NULL), segmentation fault happens.
Changed code returns -1 to deal with this situation.
Bug issued with Smatch, static analysis.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 2d7007153f ("[media] media: videobuf2: Restructure vb2_buffer")
replaced vb2_buffer with vb2_v4l2_buffer in all v4l2 drivers. The
restructuring skipped the v4l2-pci-skeleton, probably because it resides
outside the drivers directory.
The v4l2_buf_ops assume that the passed buffer is a vb2_v4l2_buffer.
This is not the case if the skel_buffer is based on vb2_buffer instead
of vb2_v4l2_buffer.
Replace vb2_buffer with vb2_v4l2_buffer in the skeleton to make sure
that future drivers that are based on the skeleton use vb2_v4l2_buffer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
SUBDIRS has been kept as a backward compatibility since
commit ("[PATCH] kbuild: external module support") in 2002.
We do not need multiple ways to do the same thing, so I will remove
SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and
updated the document so that nobody would try to use it.
Meanwhile, display the following warning if SUBDIRS is used.
Makefile:189: ================= WARNING ================
Makefile:190: 'SUBDIRS' will be removed after Linux 5.3
Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead
Makefile:192: ==========================================
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c
Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
Find the ifindex with if_nametoindex() instead of requiring the
numeric ifindex.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Store only the total packet count for every protocol, instead of the
whole per-cpu array.
Use bpf_map_get_next_key() to iterate the map, instead of looking up
all the protocols.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, kprobe_events failure won't be handled properly.
Due to calling system() indirectly to write to kprobe_events,
it can't be identified whether an error is derived from kprobe or system.
// buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events"
err = system(buf);
if (err < 0) {
printf("failed to create kprobe ..");
return -1;
}
For example, running ./tracex7 sample in ext4 partition,
"echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events"
gets 256 error code system() failure.
=> The error comes from kprobe, but it's not handled correctly.
According to man of system(3), it's return value
just passes the termination status of the child shell
rather than treating the error as -1. (don't care success)
Which means, currently it's not working as desired.
(According to the upper code snippet)
ex) running ./tracex7 with ext4 env.
# Current Output
sh: echo: I/O error
failed to open event open_ctree
# Desired Output
failed to create kprobe 'open_ctree' error 'No such file or directory'
The problem is, error can't be verified whether from child ps
or system. But using write() directly can verify the command
failure, and it will treat all error as -1. So I suggest using
write() directly to 'kprobe_events' rather than calling system().
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add additional checks in tools/testing/selftests/bpf and
samples/bpf such that if clang/llvm compiler can generate
BTF sections, do not use pahole.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To help when debugging bpf/xdp load issues, have the load_map()
error message include the number and name of the map that
failed.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Here is the big set of char/misc patches for 4.20-rc1.
Loads of things here, we have new code in all of these driver
subsystems:
fpga
stm
extcon
nvmem
eeprom
hyper-v
gsmi
coresight
thunderbolt
vmw_balloon
goldfish
soundwire
along with lots of fixes and minor changes to other small drivers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9Le5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn+BQCfZ6DtCIgqo0UW3dLV8Fd0wya9kw0AoNglzJJ6
YRZiaSdRiggARpNdh3ME
=97BX
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc patches for 4.20-rc1.
Loads of things here, we have new code in all of these driver
subsystems:
- fpga
- stm
- extcon
- nvmem
- eeprom
- hyper-v
- gsmi
- coresight
- thunderbolt
- vmw_balloon
- goldfish
- soundwire
along with lots of fixes and minor changes to other small drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits)
Documentation/security-bugs: Clarify treatment of embargoed information
lib: Fix ia64 bootloader linkage
MAINTAINERS: Clarify UIO vs UIOVEC maintainer
docs/uio: fix a grammar nitpick
docs: fpga: document programming fpgas using regions
fpga: add devm_fpga_region_create
fpga: bridge: add devm_fpga_bridge_create
fpga: mgr: add devm_fpga_mgr_create
hv_balloon: Replace spin_is_locked() with lockdep
sgi-xp: Replace spin_is_locked() with lockdep
eeprom: New ee1004 driver for DDR4 memory
eeprom: at25: remove unneeded 'at25_remove'
w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).
misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr'
misc: mic: fix a DMA pool free failure
platform: goldfish: pipe: Add a blank line to separate varibles and code
platform: goldfish: pipe: Remove redundant casting
platform: goldfish: pipe: Call misc_deregister if init fails
platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
...
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
Some samples require headers installation, so commit 3fca1700c4
("kbuild: make samples really depend on headers_install") added
such dependency in the top Makefile. However, UML fails to build
with CONFIG_SAMPLES=y because UML does not support headers_install.
Fixes: 3fca1700c4 ("kbuild: make samples really depend on headers_install")
Reported-by: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is a warning when compiling bpf sample programs in sample/bpf:
make -C /home/foo/bpf/samples/bpf/../../tools/lib/bpf/ RM='rm -rf' LDFLAGS= srctree=/home/foo/bpf/samples/bpf/../../ O=
HOSTCC /home/foo/bpf/samples/bpf/tracex3_user.o
/home/foo/bpf/samples/bpf/tracex3_user.c:20:0: warning: "ARRAY_SIZE" redefined
#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
In file included from /home/foo/bpf/samples/bpf/tracex3_user.c:18:0:
./tools/testing/selftests/bpf/bpf_util.h:48:0: note: this is the location of the previous definition
# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
"out_buf_sz" needs to be signed for the error handling to work.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit extends the test_cgrp2_attach2 test to cover per-cpu
cgroup storage. Bpf program will use shared and per-cpu cgroup
storages simultaneously, so a better coverage of corresponding
core code will be achieved.
Expected output:
$ ./test_cgrp2_attach2
Attached DROP prog. This ping in cgroup /foo should fail...
ping: sendmsg: Operation not permitted
Attached DROP prog. This ping in cgroup /foo/bar should fail...
ping: sendmsg: Operation not permitted
Attached PASS prog. This ping in cgroup /foo/bar should pass...
Detached PASS from /foo/bar while DROP is attached to /foo.
This ping in cgroup /foo/bar should fail...
ping: sendmsg: Operation not permitted
Attached PASS from /foo/bar and detached DROP from /foo.
This ping in cgroup /foo/bar should pass...
### override:PASS
### multi:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
following commit:
commit d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
added struct bpf_flow_keys which conflicts with the struct with
same name in sockex2_kern.c and sockex3_kern.c
similar to commit:
commit 534e0e52bc ("samples/bpf: fix a compilation failure")
we tried the rename it "flow_keys" but it also conflicted with struct
having same name in include/net/flow_dissector.h. Hence renaming the
struct to "flow_key_record". Also, this commit doesn't fix the
compilation error completely because the similar struct is present in
sockex3_kern.c. Hence renaming it in both files sockex3_user.c and
sockex3_kern.c
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
samples/bpf build failed with the following errors:
$ make samples/bpf/
...
HOSTCC samples/bpf/sockex3_user.o
/data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:16:8: error: redefinition of ‘struct bpf_flow_keys’
struct bpf_flow_keys {
^
In file included from /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:4:0:
./usr/include/linux/bpf.h:2338:9: note: originally defined here
struct bpf_flow_keys *flow_keys;
^
make[3]: *** [samples/bpf/sockex3_user.o] Error 1
Commit d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
introduced struct bpf_flow_keys in include/uapi/linux/bpf.h and hence
caused the naming conflict with samples/bpf/sockex3_user.c.
The fix is to rename struct bpf_flow_keys in samples/bpf/sockex3_user.c
to flow_keys to avoid the conflict.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- xsks_map size was fixed to 4, changed it MAX_SOCKS
- Remove redundant definition of MAX_SOCKS in xdpsock_user.c
- In dump_stats(), add NULL check for xsks[i]
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example:
bpf program which is doing TOS/TCLASS reflection (server would reply
with a same TOS/TCLASS as client).
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The -c/--copy -z/--zero-copy flags enforces either copy or zero-copy
mode.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is common XDP practice to unload/deattach the XDP bpf program,
when the XDP sample program is Ctrl-C interrupted (SIGINT) or
killed (SIGTERM).
The samples/bpf programs xdp_redirect_cpu and xdp_rxq_info,
forgot to trap signal SIGTERM (which is the default signal used
by the kill command).
This was discovered by Red Hat QA, which automated scripts depend
on killing the XDP sample program after a timeout period.
Fixes: fad3917e36 ("samples/bpf: add cpumap sample program xdp_redirect_cpu")
Fixes: 0fca931a6f ("samples/bpf: program demonstrating access to xdp_rxq_info")
Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VjfG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
coccicheck: return proper error code on fail
Coccinelle: doubletest: reduce side effect false positives
kbuild: remove deprecated host-progs variable
kbuild: make samples really depend on headers_install
um: clean up archheaders recipe
kbuild: add %asm-generic to no-dot-config-targets
um: fix parallel building with O= option
scripts: Add Python 3 support to tracing/draw_functrace.py
builddeb: Add automatic support for sh{3,4}{,eb} architectures
builddeb: Add automatic support for riscv* architectures
builddeb: Add automatic support for m68k architecture
builddeb: Add automatic support for or1k architecture
builddeb: Add automatic support for sparc64 architecture
builddeb: Add automatic support for mips{,64}r6{,el} architectures
builddeb: Add automatic support for mips64el architecture
builddeb: Add automatic support for ppc64 and powerpcspe architectures
builddeb: Introduce functions to simplify kconfig tests in set_debarch
builddeb: Drop check for 32-bit s390
builddeb: Change architecture detection fallback to use dpkg-architecture
builddeb: Skip architecture detection when KBUILD_DEBARCH is set
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-13
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add driver XDP support for veth. This can be used in conjunction with
redirect of another XDP program e.g. sitting on NIC so the xdp_frame
can be forwarded to the peer veth directly without modification,
from Toshiaki.
2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
in order to provide more control and visibility on where a SO_REUSEPORT
sk should be located, and the latter enables to directly select a sk
from the bpf map. This also enables map-in-map for application migration
use cases, from Martin.
3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
of cgroup v2 that is the ancestor of the cgroup associated with the
skb at the ancestor_level, from Andrey.
4) Implement BPF fs map pretty-print support based on BTF data for regular
hash table and LRU map, from Yonghong.
5) Decouple the ability to attach BTF for a map from the key and value
pretty-printer in BPF fs, and enable further support of BTF for maps for
percpu and LPM trie, from Daniel.
6) Implement a better BPF sample of using XDP's CPU redirect feature for
load balancing SKB processing to remote CPU. The sample implements the
same XDP load balancing as Suricata does which is symmetric hash based
on IP and L4 protocol, from Jesper.
7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
critical path as it is ensured that the allocator is present, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This implement XDP CPU redirection load-balancing across available
CPUs, based on the hashing IP-pairs + L4-protocol. This equivalent to
xdp-cpu-redirect feature in Suricata, which is inspired by the
Suricata 'ippair' hashing code.
An important property is that the hashing is flow symmetric, meaning
that if the source and destination gets swapped then the selected CPU
will remain the same. This is helps locality by placing both directions
of a flows on the same CPU, in a forwarding/routing scenario.
The hashing INITVAL (15485863 the 10^6th prime number) was fairly
arbitrary choosen, but experiments with kernel tree pktgen scripts
(pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh)
showed this improved the distribution.
This patch also change the default loaded XDP program to be this
load-balancer. As based on different user feedback, this seems to be
the expected behavior of the sample xdp_redirect_cpu.
Link: https://github.com/OISF/suricata/commit/796ec08dd7a63
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adjusted function call API to take an initval. This allow the API
user to set the initial value, as a seed. This could also be used for
inputting the previous hash.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The teardown race in cpumap is really hard to reproduce. These changes
makes it easier to reproduce, for QA.
The --stress-mode now have a case of a very small queue size of 8, that helps
to trigger teardown flush to encounter a full queue, which results in calling
xdp_return_frame API, in a non-NAPI protect context.
Also increase MAX_CPUS, as my QA department have larger machines than me.
Tested-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The test_cgrp2_attach test covers bpf cgroup attachment code well,
so let's re-use it for testing allocation/releasing of cgroup storage.
The extension is pretty straightforward: the bpf program will use
the cgroup storage to save the number of transmitted bytes.
Expected output:
$ ./test_cgrp2_attach2
Attached DROP prog. This ping in cgroup /foo should fail...
ping: sendmsg: Operation not permitted
Attached DROP prog. This ping in cgroup /foo/bar should fail...
ping: sendmsg: Operation not permitted
Attached PASS prog. This ping in cgroup /foo/bar should pass...
Detached PASS from /foo/bar while DROP is attached to /foo.
This ping in cgroup /foo/bar should fail...
ping: sendmsg: Operation not permitted
Attached PASS from /foo/bar and detached DROP from /foo.
This ping in cgroup /foo/bar should pass...
### override:PASS
### multi:PASS
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Convert xdpsock_user.c to use libbpf instead of bpf_load.o.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Convert xdp_fwd_user.c to use libbpf instead of bpf_load.o.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To smoothly test BTF supported binary on samples/bpf,
let samples/bpf/Makefile probe llc, pahole and
llvm-objcopy for BPF support and use them
like tools/testing/selftests/bpf/Makefile
changed from the commit c0fa1b6c3e ("bpf: btf:
Add BTF tests").
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Define u_smp_rmb() and u_smp_wmb() to respective barrier instructions.
This ensures the processor will order accesses to queue indices against
accesses to queue ring entries.
Signed-off-by: Brian Brooks <brian.brooks@linaro.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-07-20
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add sharing of BPF objects within one ASIC: this allows for reuse of
the same program on multiple ports of a device, and therefore gains
better code store utilization. On top of that, this now also enables
sharing of maps between programs attached to different ports of a
device, from Jakub.
2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
detections and unused variable exports, also from Jakub.
3) First batch of RCU annotation fixes in prog array handling, i.e.
there are several __rcu markers which are not correct as well as
some of the RCU handling, from Roman.
4) Two fixes in BPF sample files related to checking of the prog_cnt
upper limit from sample loader, from Dan.
5) Minor cleanup in sockmap to remove a set but not used variable,
from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Lots of fixes, here goes:
1) NULL deref in qtnfmac, from Gustavo A. R. Silva.
2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.
3) Lost completion messages in AF_XDP, from Magnus Karlsson.
4) Correct bogus self-assignment in rhashtable, from Rishabh
Bhatnagar.
5) Fix regression in ipv6 route append handling, from David Ahern.
6) Fix masking in __set_phy_supported(), from Heiner Kallweit.
7) Missing module owner set in x_tables icmp, from Florian Westphal.
8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.
9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.
10) Fix NULL deref when using chains in act_csum, from Davide Caratti.
11) XDP_REDIRECT needs to check if the interface is up and whether the
MTU is sufficient. From Toshiaki Makita.
12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
connections, from Lorenzo Colitti.
13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
full minute, delaying device unregister. From Eric Dumazet.
14) Update MAC entries in the correct order in ixgbe, from Alexander
Duyck.
15) Don't leave partial mangles bpf program in jit_subprogs, from
Daniel Borkmann.
16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.
17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.
18) Use after free in tun XDP_TX, from Toshiaki Makita.
19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.
20) Don't reuse remainder of RX page when XDP is set in mlx4, from
Saeed Mahameed.
21) Fix window probe handling of TCP rapair sockets, from Stefan
Baranoff.
22) Missing socket locking in smc_ioctl(), from Ursula Braun.
23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.
24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.
25) Two spots in ipv6 do a rol32() on a hash value but ignore the
result. Fixes from Colin Ian King"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
tcp: identify cryptic messages as TCP seq # bugs
ptp: fix missing break in switch
hv_netvsc: Fix napi reschedule while receive completion is busy
MAINTAINERS: Drop inactive Vitaly Bordug's email
net: cavium: Add fine-granular dependencies on PCI
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
ipv6: fix useless rol32 call on hash
ipv6: sr: fix useless rol32 call on hash
net: sched: Using NULL instead of plain integer
net: usb: asix: replace mii_nway_restart in resume path
net: cxgb3_main: fix potential Spectre v1
lib/rhashtable: consider param->min_size when setting initial table size
net/smc: reset recv timeout after clc handshake
net/smc: add error handling for get_user()
net/smc: optimize consumer cursor updates
net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
ipv6: ila: select CONFIG_DST_CACHE
net: usb: rtl8150: demote allmulti message to dev_dbg()
...
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
"prog_cnt" is the number of elements which are filled out in prog_fd[]
so the test should be >= instead of >.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I can't see that we check prog_cnt to ensure it doesn't go over
MAX_PROGS.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
People noticed that the code match on IEEE 802.1ad (ETH_P_8021AD) ethertype,
and this implies Q-in-Q or double tagged VLANs. Thus, we better parse
the next VLAN header too. It is even marked as a TODO.
This is relevant for real world use-cases, as XDP cpumap redirect can be
used when the NIC RSS hashing is broken. E.g. the ixgbe driver HW cannot
handle double tagged VLAN packets, and places everything into a single
RX queue. Using cpumap redirect, users can redistribute traffic across
CPUs to solve this, which is faster than the network stacks RPS solution.
It is left as an exerise how to distribute the packets across CPUs. It
would be convenient to use the RX hash, but that is not _yet_ exposed
to XDP programs. For now, users can code their own hash, as I've demonstrated
in the Suricata code (where Q-in-Q is handled correctly).
Reported-by: Florian Maury <florian.maury-cv@x-cli.eu>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
mdev_access() calls mbochs_get_page() with mdev_state->ops_lock held,
while mbochs_get_page() locks the mutex by itself.
It leads to unavoidable deadlock.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The below path error can occur:
# ./xdp2skb_meta.sh --dev eth0 --list
./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory
So just use command names instead of absolute paths of tc and ip.
In addition, it allow callers to redefine $TC and $IP paths
Fixes: 36e04a2d78 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB")
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For untracked executables of samples/bpf, add this.
Untracked files:
(use "git add <file>..." to include in what will be committed)
samples/bpf/cpustat
samples/bpf/fds_example
samples/bpf/lathist
samples/bpf/load_sock_ops
...
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_task_rename() and test_urandom_read()
can be failed during write() and read(),
So check the result of them.
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To avoid the below build warning message,
use new generate_load() checking the return value.
ignoring return value of ‘system’, declared with attribute warn_unused_result
And it also refactors the duplicate code of both
test_perf_event_all_cpu() and test_perf_event_task()
Cc: Teng Qin <qinteng@fb.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This fixes build error regarding redefinition:
CLANG-bpf samples/bpf/parse_varlen.o
samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr'
struct vlan_hdr {
^
./include/linux/if_vlan.h:38:8: note: previous definition is here
So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-07-03
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Various improvements to bpftool and libbpf, that is, bpftool build
speed improvements, missing BPF program types added for detection
by section name, ability to load programs from '.text' section is
made to work again, and better bash completion handling, from Jakub.
2) Improvements to nfp JIT's map read handling which allows for optimizing
memcpy from map to packet, from Jiong.
3) New BPF sample is added which demonstrates XDP in combination with
bpf_perf_event_output() helper to sample packets on all CPUs, from Toke.
4) Add a new BPF kselftest case for tracking connect(2) BPF hooks
infrastructure in combination with TFO, from Andrey.
5) Extend the XDP/BPF xdp_rxq_info sample code with a cmdline option to
read payload from packet data in order to use it for benchmarking.
Also for '--action XDP_TX' option implement swapping of MAC addresses
to avoid drops on some hardware seen during testing, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet
was discarded and completed by the driver. Just ignore this message
in the sample application.
Fixes: b4b8faa1de ("samples/bpf: sample application and documentation for AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For ACLs implemented using either FIB rules or FIB entries, the BPF
program needs the FIB lookup status to be able to drop the packet.
Since the bpf_fib_lookup API has not reached a released kernel yet,
change the return code to contain an encoding of the FIB lookup
result and return the nexthop device index in the params struct.
In addition, inform the BPF program of any post FIB lookup reason as
to why the packet needs to go up the stack.
The fib result for unicast routes must have an egress device, so remove
the check that it is non-NULL.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XDP_TX requires also changing the MAC-addrs, else some hardware
may drop the TX packet before reaching the wire. This was
observed with driver mlx5.
If xdp_rxq_info select --action XDP_TX the swapmac functionality
is activated. It is also possible to manually enable via cmdline
option --swapmac. This is practical if wanting to measure the
overhead of writing/updating payload for other action types.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is a cost associated with reading the packet data payload
that this test ignored. Add option --read to allow enabling
reading part of the payload.
This sample/tool helps us analyse an issue observed with a NIC
mlx5 (ConnectX-5 Ex) and an Intel(R) Xeon(R) CPU E5-1650 v4.
With no_touch of data:
Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:no_touch
XDP stats CPU pps issue-pps
XDP-RX CPU 0 14,465,157 0
XDP-RX CPU 1 14,464,728 0
XDP-RX CPU 2 14,465,283 0
XDP-RX CPU 3 14,465,282 0
XDP-RX CPU 4 14,464,159 0
XDP-RX CPU 5 14,465,379 0
XDP-RX CPU total 86,789,992
When not touching data, we observe that the CPUs have idle cycles.
When reading data the CPUs are 100% busy in softirq.
With reading data:
Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:read
XDP stats CPU pps issue-pps
XDP-RX CPU 0 9,620,639 0
XDP-RX CPU 1 9,489,843 0
XDP-RX CPU 2 9,407,854 0
XDP-RX CPU 3 9,422,289 0
XDP-RX CPU 4 9,321,959 0
XDP-RX CPU 5 9,395,242 0
XDP-RX CPU total 56,657,828
The effect seen above is a result of cache-misses occuring when
more RXQs are being used. Based on perf-event observations, our
conclusion is that the CPUs DDIO (Direct Data I/O) choose to
deliver packet into main memory, instead of L3-cache. We also
found, that this can be mitigated by either using less RXQs or by
reducing NICs the RX-ring size.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add an example program showing how to sample packets from XDP using the
perf event buffer. The example userspace program just prints the ethernet
header for every packet sampled.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is no default implementation for dma_buf_ops->unmap.
So add a function unmapping the page, otherwise we'll leak them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Atomic mapping interface for dmabufs will be removed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The new bochs vbe sample fails to link when DMA_SHARED_BUFFER is
disabled:
ERROR: "dma_buf_export" [samples/vfio-mdev/mbochs.ko] undefined!
ERROR: "dma_buf_fd" [samples/vfio-mdev/mbochs.ko] undefined!
This uses a 'select' statement to enable that framework, like all
other users do.
Fixes: a5e6e6505f ("sample: vfio bochs vbe display (host device for bochs-drm)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Display device, demo-ing the vfio dmabuf display interface
(VFIO_GFX_PLANE_TYPE_DMABUF). Compatible enough to qemu stdvga
that bochs-drm.ko can be used as guest driver.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- charlcd: fixes and cleanups
From Robert Abel and Sean Young
- Kconfig fixes
From Randy Dunlap, Corentin Labbe and Ulf Magnusson
- cfag12864bfb: const cleanup
From Gustavo A. R. Silva
- Docs/licenses/warnings cleanups
-----BEGIN PGP SIGNATURE-----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=SYoI
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-for-linus-v4.18-rc1' of git://github.com/ojeda/linux
Pull auxdisplay updates from Miguel Ojeda:
"Mostly small fixes and cleanups, plus a non-trivial fix for charlcd
- charlcd: fixes and cleanups (Robert Abel and Sean Young)
- Kconfig fixes (Randy Dunlap, Corentin Labbe and Ulf Magnusson)
- cfag12864bfb: const cleanup (Gustavo A. R. Silva)
- Docs/licenses/warnings cleanups"
* tag 'auxdisplay-for-linus-v4.18-rc1' of git://github.com/ojeda/linux:
auxdisplay: Replace licenses with SPDX identifiers
auxdisplay: make PANEL a menuconfig
auxdisplay: fix broken menu
auxdisplay: charlcd: Fix and clean up handling of x/y commands
auxdisplay: charlcd: fix hex literal ranges for graphics command
auxdisplay: charlcd: fix two-line command ^[[LN not marked as processed
auxdisplay: charlcd: replace octal literal with form-feed escape sequence
auxdisplay: charlcd: use null character instead of zero literal to terminate strings
auxdisplay: charlcd: no need to call charlcd_gotoxy() if nothing changes
auxdisplay: cfag12864bfb: constify fb_fix_screeninfo and fb_var_screeninfo structures
auxdisplay: img-ascii-lcd: fix typo on select SYSCON/MFD_SYSCON
auxdisplay: img-ascii-lcd: kconfig: Remove MIPS_SEAD3 reference
auxdisplay: arm-charlcd: Fix struct charlcd doc line
MAINTAINERS: auxdisplay: remove obsolete webpages
Doc: misc-devices: move lcd-panel-cgram.txt to auxdisplay/
Make sure that XDP_SKB also uses the skb Tx path.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Here, the xdpsock sample application is adjusted to the new descriptor
format.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As Michal noted the flow struct takes both the flow label and priority.
Update the bpf_fib_lookup API to note that it is flowinfo and not just
the flow label.
Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update xdp_monitor to use the recently added err code introduced
in tracepoint xdp:xdp_devmap_xmit, to show if the drop count is
caused by some driver general delivery problem. Other kind of drops
will likely just be more normal TX space issues.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xdp_monitor sample/tool is updated to use the new tracepoint
xdp:xdp_devmap_xmit the previous patch just introduced.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is mostly to test kprobe/uprobe which needs kernel headers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adapt xdpsock to use the new getsockopt introduced in the previous
commit.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up SPDX-License-Identifier and removing licensing leftovers.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Only consider forwarding packets if ttl in received packet is > 1 and
decrement ttl before handing off to bpf_redirect_map.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Building samples with clang ignores the $(Q) setting, always
printing full command to the output. Make it less verbose.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make complains that it doesn't know how to make libbpf.a:
scripts/Makefile.host:106: target 'samples/bpf/../../tools/lib/bpf/libbpf.a' doesn't match the target pattern
Now that we have it as a dependency of the sources simply add libbpf.a
to libraries not objects.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are many ways users may compile samples, some of them got
broken by commit 5f9380572b ("samples: bpf: compile and link
against full libbpf"). Improve path resolution and make libbpf
building a dependency of source files to force its build.
Samples should now again build with any of:
cd samples/bpf; make
make samples/bpf/
make -C samples/bpf
cd samples/bpf; make O=builddir
make samples/bpf/ O=builddir
make -C samples/bpf O=builddir
export KBUILD_OUTPUT=builddir
make samples/bpf/
make -C samples/bpf
Fixes: 5f9380572b ("samples: bpf: compile and link against full libbpf")
Reported-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The libbpf.h file in samples is clashing with libbpf's header.
Since it only includes a subset of filter.h instruction helpers
rename it to bpf_insn.h. Drop the unnecessary include of bpf/bpf.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are two files in the tree called libbpf.h which is becoming
problematic. Most samples don't actually need the local libbpf.h
they simply include it to get to bpf/bpf.h. Include bpf/bpf.h
directly instead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers. This way newcomers will be exposed to the
recommended library from the start.
Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are two copies of event reading loop - in bpftool and
trace_helpers "library". Consolidate them and move the code
to libbpf. Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
samples/bpf currently cherry-picks object files from tools/lib/bpf
to link against. Just compile the full library and link statically
against it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Both tools/lib/bpf/libbpf.h and samples/bpf/bpf_load.h define their
own version of struct bpf_map_def. The version in bpf_load.h has
more fields. libbpf does not support inner maps and its definition
of struct bpf_map_def lacks the related fields. Rename the definition
in bpf_load.h (samples/bpf) to avoid conflicts.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.
Take this only as a simple example of fast-path forwarding.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is a sample application for AF_XDP sockets. The application
supports three different modes of operation: rxdrop, txonly and l2fwd.
To show-case a simple round-robin load-balancing between a set of
sockets in an xskmap, set the RR_LB compile time define option to 1 in
"xdpsock.h".
v2: The entries variable was calculated twice in {umem,xq}_nb_avail.
Co-authored-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit d5a00528b5 ("syscalls/core, syscalls/x86: Rename
struct pt_regs-based sys_*() to __x64_sys_*()") renamed a lot
of syscall function sys_*() to __x64_sys_*().
This caused several kprobe based samples/bpf tests failing.
This patch fixed the problem in bpf_load.c.
For x86_64 architecture, function name __x64_sys_*() will be
first used for kprobe event creation. If the creation is successful,
it will be used. Otherwise, function name sys_*() will be used
for kprobe event creation.
Fixes: d5a00528b5 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no functionality change in this patch. The common-purpose
trace functions, including perf_event polling and ksym lookup,
are moved from trace_output_user.c and bpf_load.c to
selftests/bpf/trace_helpers.c so that these function can
be reused later in selftests.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2 redundant ret assignments removed:
* 'ret = 1' before the logic 'if (data_maps)', and if any errors jump to
label 'done'. No 'ret = 1' needed before the error jump.
* After the '/* load programs */' part, if everything goes well, then
the BPF code will be loaded and 'ret' set to 0 by load_and_attach().
If something goes wrong, 'ret' set to none-O, the redundant 'ret = 0'
after the for clause will make the error skipped.
For example, if some BPF code cannot provide supported program types
in ELF SEC("unknown"), the for clause will not call load_and_attach()
to load the BPF code. 1 should be returned to callees instead of 0.
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Move the testsuite to
selftests/bpf/{test_tunnel_kern.c, test_tunnel.sh}
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BPF sample sockmap is redundant now that equivelant tests exist
in the BPF selftests. Lets remove this sample and only keep the
selftest version that will be run as part of the selftest suite.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If no options are passed to sockmap after this patch we run a set of
tests using various options and sendmsg/sendpage sizes. This replaces
the sockmap_test.sh script.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
By moving sockmap_test from shell script into C we can run it directly
from selftests, but we can also push the input/output around in proper
structures.
However, keep the CLI options around because they are useful for
debugging when a paticular pattern of msghdr or sockmap options
trips up the sockmap code path.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a test for fetching xfrm state parameters from a tc program running
on ingress.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Per Documentation/bpf/bpf_devel_QA.txt add the -target flag to the
sockmap Makefile. Relevant text quoted here,
Otherwise, you can use bpf target. Additionally, you _must_ use
bpf target when:
- Your program uses data structures with pointer or long / unsigned
long types that interface with BPF helpers or context data
structures. Access into these structures is verified by the BPF
verifier and may result in verification failures if the native
architecture is not aligned with the BPF architecture, e.g. 64-bit.
An example of this is BPF_PROG_TYPE_SK_MSG require '-target bpf'
Fixes: 69e8cc134b ("bpf: sockmap sample program")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull livepatching fix from Jiri Kosina:
"Shadow variable API list_head initialization fix from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Allow to call a custom callback when freeing shadow variables
livepatch: Initialize shadow variables safely by a custom callback
adding bpf's sample program which is using bpf_xdp_adjust_tail helper
by generating ICMPv4 "packet to big" message if ingress packet's size is
bigger then 600 bytes
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The variable rec_i contains an XDP action code not an error.
Thus, using err2str() was wrong, it should have been action2str().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The program run against loopback interace "lo", not "eth0".
Correct the comment.
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We might need to do some actions before the shadow variable is freed.
For example, we might need to remove it from a list or free some data
that it points to.
This is already possible now. The user can get the shadow variable
by klp_shadow_get(), do the necessary actions, and then call
klp_shadow_free().
This patch allows to do it a more elegant way. The user could implement
the needed actions in a callback that is passed to klp_shadow_free()
as a parameter. The callback usually does reverse operations to
the constructor callback that can be called by klp_shadow_*alloc().
It is especially useful for klp_shadow_free_all(). There we need to do
these extra actions for each found shadow variable with the given ID.
Note that the memory used by the shadow variable itself is still released
later by rcu callback. It is needed to protect internal structures that
keep all shadow variables. But the destructor is called immediately.
The shadow variable must not be access anyway after klp_shadow_free()
is called. The user is responsible to protect this any suitable way.
Be aware that the destructor is called under klp_shadow_lock. It is
the same as for the contructor in klp_shadow_alloc().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The existing API allows to pass a sample data to initialize the shadow
data. It works well when the data are position independent. But it fails
miserably when we need to set a pointer to the shadow structure itself.
Unfortunately, we might need to initialize the pointer surprisingly
often because of struct list_head. It is even worse because the list
might be hidden in other common structures, for example, struct mutex,
struct wait_queue_head.
For example, this was needed to fix races in ALSA sequencer. It required
to add mutex into struct snd_seq_client. See commit b3defb791b
("ALSA: seq: Make ioctls race-free") and commit d15d662e89
("ALSA: seq: Fix racy pool initializations")
This patch makes the API more safe. A custom constructor function and data
are passed to klp_shadow_*alloc() functions instead of the sample data.
Note that ctor_data are no longer a template for shadow->data. It might
point to any data that might be necessary when the constructor is called.
Also note that the constructor is called under klp_shadow_lock. It is
an internal spin_lock that synchronizes alloc() vs. get() operations,
see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA
deadlocks. On the other hand, it allows to do some operations safely.
For example, we could add the new structure into an existing list.
This must be done only once when the structure is allocated.
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds support for generating coredumps for remoteprocs using
devcoredump, adds the Qualcomm sysmon driver for intra-remoteproc crash
handling and a number of fixes in Qualcomm and IMX drivers.
-----BEGIN PGP SIGNATURE-----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=cxV7
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.17' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- add support for generating coredumps for remoteprocs using
devcoredump
- add the Qualcomm sysmon driver for intra-remoteproc crash handling
- a number of fixes in Qualcomm and IMX drivers
* tag 'rproc-v4.17' of git://github.com/andersson/remoteproc:
remoteproc: fix null pointer dereference on glink only platforms
soc: qcom: qmi: add CONFIG_NET dependency
remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'
remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()'
remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
samples: Introduce Qualcomm QMI sample client
remoteproc: qcom: Introduce sysmon
remoteproc: Pass type of shutdown to subdev remove
remoteproc: qcom: Register segments for core dump
soc: qcom: mdt-loader: Return relocation base
remoteproc: Rename "load_rsc_table" to "parse_fw"
remoteproc: Add remote processor coredump support
remoteproc: Remove null character write of shared mem
Pull networking updates from David Miller:
1) Support offloading wireless authentication to userspace via
NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.
2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
Setup and cleanup of namespaces now all run asynchronously and thus
performance is significantly increased.
3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
Streiff.
4) Support zerocopy on RDS sockets, from Sowmini Varadhan.
5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
Borkmann.
6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
Chevallier.
7) Support grafting of child qdiscs in mlxsw driver, from Nogah
Frankel.
8) Add packet forwarding tests to selftests, from Ido Schimmel.
9) Deal with sub-optimal GSO packets better in BBR congestion control,
from Eric Dumazet.
10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.
11) Add path MTU tests to selftests, from Stefano Brivio.
12) Various bits of IPSEC offloading support for mlx5, from Aviad
Yehezkel, Yossi Kuperman, and Saeed Mahameed.
13) Support RSS spreading on ntuple filters in SFC driver, from Edward
Cree.
14) Lots of sockmap work from John Fastabend. Applications can use eBPF
to filter sendmsg and sendpage operations.
15) In-kernel receive TLS support, from Dave Watson.
16) Add XDP support to ixgbevf, this is significant because it should
allow optimized XDP usage in various cloud environments. From Tony
Nguyen.
17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
Venkataramanan et al.
18) IP fragmentation match offload support in nfp driver, from Pieter
Jansen van Vuuren.
19) Support XDP redirect in i40e driver, from Björn Töpel.
20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
tracepoints in their raw form, from Alexei Starovoitov.
21) Lots of striding RQ improvements to mlx5 driver with many
performance improvements, from Tariq Toukan.
22) Use rhashtable for inet frag reassembly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
net: mvneta: improve suspend/resume
net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
net: bgmac: Correctly annotate register space
route: check sysctl_fib_multipath_use_neigh earlier than hash
fix typo in command value in drivers/net/phy/mdio-bitbang.
sky2: Increase D3 delay to sky2 stops working after suspend
net/mlx5e: Set EQE based as default TX interrupt moderation mode
ibmvnic: Disable irqs before exiting reset from closed state
net: sched: do not emit messages while holding spinlock
vlan: also check phy_driver ts_info for vlan's real device
Bluetooth: Mark expected switch fall-throughs
Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
Bluetooth: btrsi: remove unused including <linux/version.h>
Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
sh_eth: kill useless check in __sh_eth_get_regs()
sh_eth: add sh_eth_cpu_data::no_xdfar flag
ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
...
Add BPF_SK_SKB_STREAM_VERDICT tests for ingress hook. While
we do this also bring stream tests in-line with MSG based
testing.
A map for skb options is added for userland to push options
at BPF programs.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a set of tests to verify ingress flag in redirect helpers
works correctly with various msg sizes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
add empty raw_tracepoint bpf program to test overhead similar
to kprobe and traditional tracepoint tests
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Trivial fix to spelling mistake in error message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Access to the socket API and the root network namespace is only available
when networking is enabled:
ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined!
ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined!
Adding a dependency on CONFIG_NET lets us build it in all randconfig
builds.
Fixes: 9b8a11e826 ("soc: qcom: Introduce QMI encoder/decoder")
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When FIFO mode is enabled, the receive data available interrupt
(UART_IIR_RDI in code) should be triggered when the number of data
in FIFO is equal or larger than interrupt trigger level.
This patch changes the trigger level check to ensure multiple bytes
received from upper layer can trigger RDI interrupt correctly.
Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds the test script I am currently using to validate
the latest sockmap changes. Shortly sockmap will be ported
to selftests and these will be run from the infrastructure
there. Until then add the script here so we have a coverage
checklist when porting into selftests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the msg_pull_data helper. This
uses two options txmsg_start and txmsg_end to let the user
specify start and end bytes to pull.
The options can be used with txmsg_apply, txmsg_cork options
as well as with any of the basic tests, txmsg, txmsg_redir and
txmsg_drop (plus noisy variants) to run pull_data inline with
those tests. By giving user direct control over the variables
we can easily do negative testing as well as positive tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests for SK_DROP.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sample application support for the bpf_msg_cork_bytes helper. This
lets the user specify how many bytes each verdict should apply to.
Similar to apply_bytes() tests these can be run as a stand-alone test
when used without other options or inline with other tests by using
the txmsg_cork option along with any of the basic tests txmsg,
txmsg_redir, txmsg_drop.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the apply_bytes helper. This option lets
the user specify an int on the command line specifying how much data
each verdict should apply to.
When this is set a map entry is set with the bytes input by the user
and then the specified program --txmsg or --txmsg_redir will use the
value and set the applied data. If no other option is set then a
default --txmsg_apply program is run. This program will drop pkts
if an error is detected on the bytes map lookup. Useful to verify
the map lookup and apply helper are working and causing a hard
error if it is not.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To verify data is not being dropped or corrupted this adds an option
to verify test-patterns on recv.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To exercise TX ULP sendpage implementation we need a test that does
a sendfile. Add sendfile test option here.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sockmap option to use SK_MSG program types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.
There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.
Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.
Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.
Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.
Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit adds additional test in the trace_event example, by
attaching the bpf program to MEM_UOPS_RETIRED.LOCK_LOADS event with
PERF_SAMPLE_ADDR requested, and print the lock address value read from
the bpf program to trace_pipe.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
All of the conflicts were cases of overlapping changes.
In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds tests for GRE sequence number
support for metadata mode tunnel.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_cgrp2_sock.sh and test_cgrp2_sock2.sh tests keep the program
attached to cgroup even after completion.
Using detach functionality of test_cgrp2_sock in both scripts.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=oIgK
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v4.16-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into fixes-v4.16-rc4
- do not build samples when cross compiling (Michal Hocko)
From Kees: "This disables the seccomp samples when cross compiling. We're seen too many build issues here, so
it's best to just disable it, especially since they're just the samples."
CPU is active when have running tasks on it and CPUFreq governor can
select different operating points (OPP) according to different workload;
we use 'pstate' to present CPU state which have running tasks with one
specific OPP. On the other hand, CPU is idle which only idle task on
it, CPUIdle governor can select one specific idle state to power off
hardware logics; we use 'cstate' to present CPU idle state.
Based on trace events 'cpu_idle' and 'cpu_frequency' we can accomplish
the duration statistics for every state. Every time when CPU enters
into or exits from idle states, the trace event 'cpu_idle' is recorded;
trace event 'cpu_frequency' records the event for CPU OPP changing, so
it's easily to know how long time the CPU stays in the specified OPP,
and the CPU must be not in any idle state.
This patch is to utilize the mentioned trace events for pstate and
cstate statistics. To achieve more accurate profiling data, the program
uses below sequence to insure CPU running/idle time aren't missed:
- Before profiling the user space program wakes up all CPUs for once, so
can avoid to missing account time for CPU staying in idle state for
long time; the program forces to set 'scaling_max_freq' to lowest
frequency and then restore 'scaling_max_freq' to highest frequency,
this can ensure the frequency to be set to lowest frequency and later
after start to run workload the frequency can be easily to be changed
to higher frequency;
- User space program reads map data and update statistics for every 5s,
so this is same with other sample bpf programs for avoiding big
overload introduced by bpf program self;
- When send signal to terminate program, the signal handler wakes up
all CPUs, set lowest frequency and restore highest frequency to
'scaling_max_freq'; this is exactly same with the first step so
avoid to missing account CPU pstate and cstate time during last
stage. Finally it reports the latest statistics.
The program has been tested on Hikey board with octa CA53 CPUs, below
is one example for statistics result, the format mainly follows up
Jesper Dangaard Brouer suggestion.
Jesper reminds to 'get printf to pretty print with thousands separators
use %' and setlocale(LC_NUMERIC, "en_US")', tried three different arm64
GCC toolchains (5.4.0 20160609, 6.2.1 20161016, 6.3.0 20170516) but all
of them cannot support printf flag character %' on arm64 platform, so go
back print number without grouping mode.
CPU states statistics:
state(ms) cstate-0 cstate-1 cstate-2 pstate-0 pstate-1 pstate-2 pstate-3 pstate-4
CPU-0 767 6111 111863 561 31 756 853 190
CPU-1 241 10606 107956 484 125 646 990 85
CPU-2 413 19721 98735 636 84 696 757 89
CPU-3 84 11711 79989 17516 909 4811 5773 341
CPU-4 152 19610 98229 444 53 649 708 1283
CPU-5 185 8781 108697 666 91 671 677 1365
CPU-6 157 21964 95825 581 67 566 684 1284
CPU-7 125 15238 102704 398 20 665 786 1197
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
samples/seccomp relies on the host setting which is not suitable for
crosscompilation and it actually fails when crosscompiling s390 and
powerpc all{yes,mod}config on x86_64 with
samples/seccomp/bpf-helper.h:135:2: error: #error __BITS_PER_LONG value unusable.
#error __BITS_PER_LONG value unusable.
^
In file included from samples/seccomp/bpf-fancy.c:13:0:
samples/seccomp/bpf-fancy.c: In function ‘main’:
samples/seccomp/bpf-fancy.c:38:11: error: ‘__NR_exit’ undeclared (first use in this function)
SYSCALL(__NR_exit, ALLOW),
and many others. I am doing these for compile testing and it's been
quite useful to catch issues. Crosscompiling sample code on the other
hand doesn't seem all that important so it seems like the easiest way to
simply disable samples/seccomp when crosscompiling.
Fixing this properly is not that easy as Kees explains:
: IIRC, one of the problems is with build ordering problems: the kernel
: headers used by the samples aren't available when cross compiling.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
samples/sockops program keeps the sock_ops program attached to cgroup.
Fixed this by detaching program before exit.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While building samples/sockmap, undefined reference error is thrown
for `nla_dump_errormsg'.
Linking tools/lib/bpf/nlattr.o as a fix
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure.
e.g.
[root@labbpf]# ./xdp_redirect $(</sys/class/net/eth2/ifindex) \
> $(</sys/class/net/eth3/ifindex)
failed to create a map: 1 Operation not permitted
The failure is seen when executing xdp_redirect while xdp_monitor
is already runnig.
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a sample driver that register for server notifications and
spawn clients for each available test service (service 15). The spawned
clients implements the interface for encoding "ping" and "data" requests
and decode the responses from the remote.
Acked-By: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The commit c69de58ba8 ("net: erspan: use bitfield instead of
mask and offset") changes the erspan header to use bitfield, and
commit d350a82302 ("net: erspan: create erspan metadata uapi header")
creates a uapi header file. The above two commit breaks the current
erspan test. This patch fixes it by adapting the above two changes.
Fixes: ac80c2a165 ("samples/bpf: add erspan v2 sample code")
Fixes: ef88f89c83 ("samples/bpf: extend test_tunnel_bpf.sh with ERSPAN")
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2018-02-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) support XDP attach in libbpf, from Eric.
2) minor fixes, from Daniel, Jakub, Yonghong, Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use bpf_set_link_xdp_fd instead of set_link_xdp_fd to remove some
code duplication and benefit of netlink ext ack errors message.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
