The driver has grown pretty big and will grow more, which makes it hard to
navigate and understand. Add uniform comments to the code and ensure that
it is sorted into logical sections.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Remove exit label as it is only used once from the point in code where no
cleanup is required and return can be called immediately.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The microphone mute key is missing from sparse keymap. It is present on
FX505GM and possibly other laptops. Add the missing code.
Also, comment on the fan mode switch key, which has the same code as the
already used key.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Event codes are expected to be retrieved from a queue on at least some
models. Specifically, very likely the ACPI WMI devices with _UID ATK are
queued whereas those with ASUSWMI are not [1].
The WMI event codes are pushed into a circular buffer queue. After the INIT
method is called, ACPI code is allowed to push events into this buffer.
The INIT method cannot be reverted. If the module is unloaded and an event
(such as hotkey press) gets emitted before inserting it back the events get
processed delayed by one or if the queue overflows, additionally delayed by
about 3 seconds.
It might be considered a minor issue and no normal user would likely
observe this (there is little reason unloading the driver), but it does
significantly frustrate a developer who is unlucky enough to encounter
this. Therefore, the fallback to unqueued behavior occurs whenever
something unexpected happens.
The fix flushes the old key codes out of the queue on load. After receiving
event the queue is read until either ..FFFF or 1 is encountered. Also as
noted in [1] it is checked whether notify code is equal to 0xFF before
enabling queue processing in WMI notify handler.
DSDT examples:
FX505GM
Device (ATKD)
{ ..
Name (ATKQ, Package (0x10)
{
0xFFFFFFFF, ..
}
Method (IANQ, 1, Serialized)
{
If ((AQNO >= 0x10))
{
Local0 = 0x64
While ((Local0 && (AQNO >= 0x10)))
{
Local0--
Sleep (0x0A)
}
...
..
AQTI++
AQTI &= 0x0F
ATKQ [AQTI] = Arg0
...
}
Method (GANQ, 0, Serialized)
{
..
If (AQNO)
{
...
Local0 = DerefOf (ATKQ [AQHI])
AQHI++
AQHI &= 0x0F
Return (Local0)
}
Return (One)
}
This code is almost identical to K54C, which does return Ones on empty
queue.
K54C:
Method (GANQ, 0, Serialized)
{
If (AQNO)
{
...
Return (Local0)
}
Return (Ones)
}
[1] Link: https://lkml.org/lkml/2019/4/12/104
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Suggested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Refactor WMI event handling into separate functions for getting the event
code and handling the retrieved event code as a preparation for
introduction of WMI event queue support.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The DSTS method detection mistakenly selects DCTS instead of DSTS if
nothing is returned when the method ID is not defined in WMNB. As a result,
the control of keyboard backlight is not functional for TUF Gaming series
laptops. Implement detection based on _UID of the WMI device instead.
There is evidence that DCTS is handled by ACPI WMI devices that have _UID
ASUSWMI, whereas none of the devices without ASUSWMI respond to DCTS and
DSTS is used instead [1].
DSDT examples:
FX505GM (_UID ATK):
Method (WMNB, 3, Serialized)
{ ...
If ((Local0 == 0x53545344))
{
...
Return (Zero)
}
...
// No return
}
K54C (_UID ATK):
Method (WMNB, 3, Serialized)
{ ...
If ((Local0 == 0x53545344))
{
...
Return (0x02)
}
...
Return (0xFFFFFFFE)
}
[1] Link: https://lkml.org/lkml/2019/4/11/322
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Suggested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a new function to acpi.h / wmi.c that returns _UID of the ACPI WMI
device. For example, it returns "ATK" for the following declaration in
DSDT:
Device (ATKD)
{
Name (_HID, "PNP0C14" /* Windows Management Instrumentation Device */)
// _HID: Hardware ID
Name (_UID, "ATK") // _UID: Unique ID
..
Generally, it is possible that multiple PNP0C14 ACPI devices are present in
the system as mentioned in the commit message of commit bff431e49f
("ACPI: WMI: Add ACPI-WMI mapping driver").
Therefore the _UID is returned for a specific ACPI device that declares the
given GUID, to which it is also mapped by other methods of wmi module.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The asus-nb-wmi driver is matched by WMI alias but fails to load on TUF
Gaming series laptops producing multiple ACPI errors in the kernel log.
The input buffer for WMI method invocation size is 2 dwords, whereas
3 are expected by this model.
FX505GM:
..
Method (WMNB, 3, Serialized)
{
P8XH (Zero, 0x11)
CreateDWordField (Arg2, Zero, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
CreateDWordField (Arg2, 0x08, IIA2)
Local0 = (Arg1 & 0xFFFFFFFF)
...
Compare with older K54C:
...
Method (WMNB, 3, NotSerialized)
{
CreateDWordField (Arg2, 0x00, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
Local0 = (Arg1 & 0xFFFFFFFF)
...
Increase buffer size to 3 dwords. No negative consequences of this change
are expected, as the input buffer size is not verified. The original
function is replaced by a wrapper for a new method passing value 0 for the
last parameter. The new function will be used to control RGB keyboard
backlight.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The error code and return value are mixed up. The intensity is always set
to 0 on load as kbd_led_read returns either 0 or negative value. To
reproduce set backlight to maximum, reload driver and try to increase it
using keyboard hotkey, the intensity will drop as a result. Correct the
implementation.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The driver does not clean up the hwmon device on exit or error. To
reproduce the bug, repeat rmmod, insmod to verify that device number
/sys/devices/platform/asus-nb-wmi/hwmon/hwmon?? grows every time. Replace
call for registering device with devm_* version that unregisters it
automatically.
Signed-off-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Ike Panhc <ike.pan@canonical.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove the
variable that was saving it and just recursively delete the whole
directory.
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
HP ProBook 450 G0 needs a non-standard mapping (x_inverted).
Signed-off-by: Colin Sindle <csindle@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix sparse warnings:
drivers/platform/x86/pcengines-apuv2.c:80:27: warning: symbol 'gpios_led_table' was not declared. Should it be static?
drivers/platform/x86/pcengines-apuv2.c:113:27: warning: symbol 'gpios_key_table' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-By: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix a null pointer deference by acpi_driver_data() if device is
null (dereference before check). We should only set cdev and check
this is OK after we are sure device is not null.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The CONFIG_BACKLIGHT_LCD_SUPPORT was removed in commit 8c5dc8d9f1
("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel
symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now
available directly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Added touch screen info for CHUWI Hi10 Plus tablet.
Signed-off-by: Daniel Smith <danct12@disroot.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
New driver of power button for Basin Cove PMIC.
ASUS WMI driver has got a Fn lock mode switch support.
Resolve a never end story with non working Wi-Fi on newer Lenovo Ideapad
computers. Now the black list is replaced with white list.
New facility to debug S0ix failures on Intel Atom platforms. The Intel PMC
and accompanying drivers are cleaned up.
Mellanox got a new TmFifo driver. Besides tachometer sensor and watchdog
are enabled on Mellanox platforms.
The information of embedded controller is now recognized on new Thinkpads.
Bluetooth driver on Thinkpads is blacklisted for some models.
Touchscreen DMI driver extended to support 'jumper ezpad 6 pro b' and
Myria MY8307 2-in-1.
Additionally few small fixes here and there for WMI and ACPI laptop drivers.
The following is an automated git shortlog grouped by driver:
alienware-wmi:
- printing the wrong error code
- fix kfree on potentially uninitialized pointer
asus-wmi:
- Add fn-lock mode switch support
dell-laptop:
- fix rfkill functionality
dell-rbtn:
- Add missing #include
ideapad-laptop:
- Remove no_hw_rfkill_list
intel_pmc_core:
- Allow to dump debug registers on S0ix failure
- Convert to a platform_driver
- Mark local function static
intel_pmc_ipc:
- Don't map non-used optional resources
- Apply same width for offset definitions
- Use BIT() macro
- adding error handling
intel_punit_ipc:
- Revert "Fix resource ioremap warning"
mlx-platform:
- Add mlx-wdt platform driver activation
- Add support for tachometer speed register
- Add TmFifo driver for Mellanox BlueField Soc
sony-laptop:
- Fix unintentional fall-through
thinkpad_acpi:
- cleanup for Thinkpad ACPI led
- Mark expected switch fall-throughs
- fix spelling mistake "capabilites" -> "capabilities"
- Read EC information on newer models
- Disable Bluetooth for some machines
touchscreen_dmi:
- Add info for 'jumper ezpad 6 pro b' touchscreen
- Add info for Myria MY8307 2-in-1
-----BEGIN PGP SIGNATURE-----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=5b//
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
"Gathered pile of patches for Platform Drivers x86. No surprises and no
merge conflicts. Business as usual.
Summary:
- New driver of power button for Basin Cove PMIC.
- ASUS WMI driver has got a Fn lock mode switch support.
- Resolve a never end story with non working Wi-Fi on newer Lenovo
Ideapad computers. Now the black list is replaced with white list.
- New facility to debug S0ix failures on Intel Atom platforms. The
Intel PMC and accompanying drivers are cleaned up.
- Mellanox got a new TmFifo driver. Besides tachometer sensor and
watchdog are enabled on Mellanox platforms.
- The information of embedded controller is now recognized on new
Thinkpads. Bluetooth driver on Thinkpads is blacklisted for some
models.
- Touchscreen DMI driver extended to support 'jumper ezpad 6 pro b'
and Myria MY8307 2-in-1.
- Additionally few small fixes here and there for WMI and ACPI laptop
drivers.
- The following is an automated git shortlog grouped by driver:
- alienware-wmi:
- printing the wrong error code
- fix kfree on potentially uninitialized pointer
- asus-wmi:
- Add fn-lock mode switch support
- dell-laptop:
- fix rfkill functionality
- dell-rbtn:
- Add missing #include
- ideapad-laptop:
- Remove no_hw_rfkill_list
- intel_pmc_core:
- Allow to dump debug registers on S0ix failure
- Convert to a platform_driver
- Mark local function static
- intel_pmc_ipc:
- Don't map non-used optional resources
- Apply same width for offset definitions
- Use BIT() macro
- adding error handling
- intel_punit_ipc:
- Revert "Fix resource ioremap warning"
- mlx-platform:
- Add mlx-wdt platform driver activation
- Add support for tachometer speed register
- Add TmFifo driver for Mellanox BlueField Soc
- sony-laptop:
- Fix unintentional fall-through
- thinkpad_acpi:
- cleanup for Thinkpad ACPI led
- Mark expected switch fall-throughs
- fix spelling mistake "capabilites" -> "capabilities"
- Read EC information on newer models
- Disable Bluetooth for some machines
- touchscreen_dmi:
- Add info for 'jumper ezpad 6 pro b' touchscreen
- Add info for Myria MY8307 2-in-1"
* tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86: (26 commits)
platform/x86: Add support for Basin Cove power button
platform/x86: asus-wmi: Add fn-lock mode switch support
platform/x86: ideapad-laptop: Remove no_hw_rfkill_list
platform/x86: touchscreen_dmi: Add info for 'jumper ezpad 6 pro b' touchscreen
platform/x86: thinkpad_acpi: cleanup for Thinkpad ACPI led
platform/x86: thinkpad_acpi: Mark expected switch fall-throughs
platform/x86: sony-laptop: Fix unintentional fall-through
platform/x86: alienware-wmi: printing the wrong error code
platform/x86: intel_pmc_core: Allow to dump debug registers on S0ix failure
platform/x86: intel_pmc_core: Convert to a platform_driver
platform/x86: mlx-platform: Add mlx-wdt platform driver activation
platform/x86: mlx-platform: Add support for tachometer speed register
platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc
platform/x86: thinkpad_acpi: fix spelling mistake "capabilites" -> "capabilities"
platform/x86: intel_punit_ipc: Revert "Fix resource ioremap warning"
platform/x86: intel_pmc_ipc: Don't map non-used optional resources
platform/x86: intel_pmc_ipc: Apply same width for offset definitions
platform/x86: intel_pmc_ipc: Use BIT() macro
platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer
platform/x86: dell-laptop: fix rfkill functionality
...
This provides a new input driver for supporting the power button on
Basin Cove PMIC, found on Intel Merrifield-based devices.
The driver follows the design used in intel_chtdc_ti_pwrbtn.c module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some of latest ASUS laptops support new fn-lock mode switching.
This commit detect whether if the fn-lock option is enabled in
BIOS setting, and toggle the fn-lock mode via a new WMI DEVID
0x00100023 when the corresponding notify code captured.
The ASUS fn-lock mode switch is activated by pressing Fn+Esc.
When on, keys F1 to F12 behave as applicable, with meanings
defined by the application being used at the time. When off,
F1 to F12 directly triggers hardware features, well known audio
volume up/down, brightness up/down...etc, which were triggered
by holding down Fn key and F-keys.
Because there's no way to retrieve the fn-lock mode via existing
WMI methods per ASUS spec, driver need to initialize and keep the
fn-lock mode by itself.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When the ideapad-laptop driver was first written it was written for laptops
which had a hardware rfkill switch. So when the first ideapad laptops
showed up without a hw rfkill switch and it turned out that in this case
the ideapad firmware interface would always report the wifi being hardware-
blocked, a DMI id list of models which lack a hw rfkill switch was started
(by yours truly). Things were done this way to avoid regressing existing
models with a hw rfkill switch. In hindsight this was a mistake.
Lenovo releases a lot of ideapad models every year and even the latest
models still use the "VPC2004" ACPI interface the ideapad-laptop driver
binds to. Having a hw rfkill switch is quite rare on modern hardware, so
all these new models need to be added to the no_hw_rfkill_list, leading
to a never ending game of whack a mole.
Worse the failure mode when not present on the list, is very bad. In this
case the ideapad-laptop driver will report the wifi as being hw-blocked,
at which points NetworkManager does not even try to use it and the user
ends up with non working wifi.
This leads to various Linux fora on the internet being filled with
wifi not working on ideapad laptops stories, which does not make Linux
look good.
The failure mode when we flip the default to assuming that a hw rfkill
switch is not present OTOH is quite benign. When we properly report the
wifi as being hw-blocked on ideapads which do have the hw-switch; and it
is in the wifi-off position, then at least when using NetworkManager +
GNOME3 the user will get a "wifi disabled in hardware" message when trying
to connect to the wifi from the UI. If OTOH we assume there is no hardware
rfkill switch, then the user will get an empty list for the list of
available networks. Although the empty list vs the "wifi disabled in
hardware" message is a regression, it is a very minor regression and it
can easily be fixed on a model by model basis by filling the new
hw_rfkill_list this commit introduces.
Therefor this commit removes the ever growing no_hw_rfkill_list, flipping
the default to assuming there is no hw rfkill switch and adding a new
hw_rfkill_list. Thereby fixing the wifi not working on all the current
ideapad and yoga models which are not on the list yet and also fixing it
for all future ideapad and yoga models using the "VPC2004" ACPI interface.
Note once this patch has been accepted upstream. I plan to write a blog
post asking for users of ideapads and yoga's with a hw rfkill switch to
step forward, so that we can populate the new hw_rfkill_list with the few
older yoga and ideapad models which actually have a hw rfkill switch.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1703338
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add touchscreen platform data for the 'jumper ezpad 6 pro b' touchscreen.
Signed-off-by: Benjamin Renz <appswert@gmail.com>
[hdegoede@redhat.com: Cleanup commit msg, fix some checkpatch warnings]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make error returns more consistent... no behaviour change intended.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/platform/x86/thinkpad_acpi.c: In function ‘thermal_get_sensor’:
drivers/platform/x86/thinkpad_acpi.c:6316:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (idx >= 8 && idx <= 15) {
^
drivers/platform/x86/thinkpad_acpi.c:6322:2: note: here
case TPACPI_THERMAL_TPEC_8:
^~~~
drivers/platform/x86/thinkpad_acpi.c: In function ‘hotkey_notify’:
drivers/platform/x86/thinkpad_acpi.c:4208:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (tp_features.hotkey_wlsw &&
^
drivers/platform/x86/thinkpad_acpi.c:4216:3: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comments are modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It seems that the default case should return AE_CTRL_TERMINATE, instead
of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK;
otherwise the line of code at the end of the function is unreachable and
makes no sense:
return AE_CTRL_TERMINATE;
This fix is based on the following thread of discussion:
https://lore.kernel.org/patchwork/patch/959782/
Fixes: 33a0445452 ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The "out_data" variable is uninitialized at the point. Originally, this
used to print "status" instead and that seems like the correct thing to
print.
Fixes: bc2ef88432 ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a module parameter which when enabled, will check on resume, if the
last S0ix attempt was successful. If not, the driver would warn and provide
helpful debug information (which gets latched during the failed suspend
attempt) to debug the S0ix failure.
This information is very useful to debug S0ix failures. Specially since
the latched debug information will be lost (over-written) if the system
attempts to go into runtime (or imminent) S0ix again after that failed
suspend attempt.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert the intel_pmc_core driver to a platform driver. There is no
functional change to the driver, or to the way the devices are
instantiated.
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add mlx-wdt platform driver activation. Watchdog driver uses the same
regmap infrastructure as others Mellanox platform drivers. Specific
registers description for watchdog platform data configuration are
added to mlx-platform. There are the registers for watchdog timer
manipulation, and action setting on watchdog timer expiration.
The watchdog action function could be configured to perform one of the
following: system reset, setting PWM to full speed or counter
increment.
Two types of watchdog devices are supported main and auxiliary.
These devices are co-exist and each of them could be configured to
handle the specific action.
Signed-off-by: Michael Shych <michealsh@mellanox.com>
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for tachometer speed register for the next generation
systems MQMB7xx, MSN37xx, MSN34xx, MSN38xx.
All these systems support tachometer speed capability register.
This register is to be provided mlxreg-fan driver.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is a spelling mistake in a module parameter description. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since we have a proper fix for intel_pmc_ipc driver for resource management,
get rid of unneeded commit in the intel_punit_ipc driver.
This reverts commit 6cc8cbbc88.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
The intel_pmc_ipc driver has a placeholder for all possible resources
that may have been provided by ACPI. Since there are few optional ones,
the driver still uses them and binds to wrong ranges in resource tree:
# grep intel_punit_ipc /proc/iomem
00000000-00000000 : intel_punit_ipc
00000000-00000000 : intel_punit_ipc
00000000-00000000 : intel_punit_ipc
00000000-00000000 : intel_punit_ipc
This leads to issues with resource management during inserting and
removing modules, such as intel_pmc_ipc itself, which can't be inserted
anymore after first removal.
Count the actual resources provided and supply only them to the child device.
This is a real fix of the commit 8cc7fb4a65
("intel_pmc_ipc: update acpi resource structure for Punit")
that also fixes a symptoms described in the commit 6cc8cbbc88
("platform/x86: intel_punit_ipc: Fix resource ioremap warning")
that is going to be reverted afterwards.
Reported-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Qipeng Zha <qipeng.zha@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Apply same width for offset definitions to make code more consistent.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use BIT() and BIT_MASK() macros for definitions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Currently the kfree of output.pointer can be potentially freeing
an uninitalized pointer in the case where out_data is NULL. Fix this
by reworking the case where out_data is not-null to perform the
ACPI status check and also the kfree of outpoint.pointer in one block
and hence ensuring the pointer is only freed when it has been used.
Also replace the if (ptr != NULL) idiom with just if (ptr).
Fixes: ff0e9f2628 ("platform/x86: alienware-wmi: Correct a memory leak")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
When converting the driver two arguments were transposed leading
to rfkill not working.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201427
Reported-by: Pepijn de Vos <pepijndevos@gmail.com>
Fixes: 549b49 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls")
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Cc: <stable@vger.kernel.org> # 4.14.x
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
It's used by probe and that isn't an init function. Drop this so that we
don't get a section mismatch.
Reported-by: kbuild test robot <lkp@intel.com>
Cc: David Müller <dave.mueller@gmx.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 7c2e071300 ("clk: x86: Add system specific quirk to mark clocks as critical")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since commit 648e921888 ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are
unconditionally gated off. Unfortunately this will break systems where these
clocks are used for external purposes beyond the kernel's knowledge. Fix it
by implementing a system specific quirk to mark the necessary pmc_plt_clks as
critical.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: David Müller <dave.mueller@gmx.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
