Commit Graph

195 Commits

Author SHA1 Message Date
Rafael J. Wysocki
ec4b8ddcd3 Merge branch 'pm-pci'
* pm-pci:
  PCI / PM: Fix native PME handling during system suspend/resume
  PCI / PM: Restore PME Enable after config space restoration
2017-07-14 13:15:49 +02:00
Rafael J. Wysocki
0ce3fcaff9 PCI / PM: Restore PME Enable after config space restoration
Commit dc15e71eef (PCI / PM: Restore PME Enable if skipping wakeup
setup) introduced a mechanism by which the PME Enable bit can be
restored by pci_enable_wake() if dev->wakeup_prepared is set in
case it has been overwritten by PCI config space restoration.

However, that commit overlooked the fact that on some systems (Dell
XPS13 9360 in particular) the AML handling wakeup events checks PME
Status and PME Enable and it won't trigger a Notify() for devices
where those bits are not set while it is running.

That happens during resume from suspend-to-idle when pci_restore_state()
invoked by pci_pm_default_resume_early() clears PME Enable before the
wakeup events are processed by AML, effectively causing those wakeup
events to be ignored.

Fix this issue by restoring the PME Enable configuration right after
pci_restore_state() has been called instead of doing that in
pci_enable_wake().

Fixes: dc15e71eef (PCI / PM: Restore PME Enable if skipping wakeup setup)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-12 23:09:21 +02:00
Linus Torvalds
f263fbb8d6 pci-v4.13-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZYAFUAAoJEFmIoMA60/r8cFQP/A4fpdjhd42WRNQXGTpZieop
 i40lBQtGdBn/UY97U6BoutcS1ygDi9OiSzg+IR6I90iMgidqyUHFhe4hGWgVHD2g
 Tg0KLzd+lKKfQ6Gqt1P6t4dLGLvyEj5NUbCeFE4XYODAUkkiBaOndax6DK1GvU54
 Vjuj63rHtMKFR/tG/4iFTigObqyI8QE6O9JVxwuvIyEX6RXKbJe+wkulv5taSnWt
 Ne94950i10MrELtNreVdi8UbCbXiqjg0r5sKI/WTJ7Bc7WsC7X5PhWlhcNrbHyBT
 Ivhoypkui3Ky8gvwWqL0KBG+cRp8prBXAdabrD9wRbz0TKnfGI6pQzseCGRnkE6T
 mhlSJpsSNIHaejoCjk93yPn5oRiTNtPMdVhMpEQL9V/crVRGRRmbd7v2TYvpMHVR
 JaPZ8bv+C2aBTY8uL3/v/rgrjsMKOYFeaxeNklpErxrknsbgb6BgubmeZXDvTBVv
 YUIbAkvveonUKisv+kbD8L7tp1+jdbRUT0AikS0NVgAJQhfArOmBcDpTL9YC51vE
 feFhkVx4A32vvOm7Zcg9A7IMXNjeSfccKGw3dJOAvzgDODuJiaCG6S0o7B5Yngze
 axMi87ixGT4QM98z/I4MC8E9rDrJdIitlpvb6ZBgiLzoO3kmvsIZZKt8UxWqf5r8
 w3U2HoyKH13Qbkn1xkum
 =mkyb
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
    Khee)

  - make host bridge IRQ mapping much more generic (Matthew Minter,
    Lorenzo Pieralisi)

  - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
    Pieralisi)

  - mutex sriov_configure() (Jakub Kicinski)

  - mutex pci_error_handlers callbacks (Christoph Hellwig)

  - split ->reset_notify() into ->reset_prepare()/reset_done()
    (Christoph Hellwig)

  - support multiple PCIe portdrv interrupts for MSI as well as MSI-X
    (Gabriele Paoloni)

  - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
    Paoloni)

  - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)

  - test INTx masking during enumeration, not at run-time (Piotr Gregor)

  - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)

  - restore the status of PCI devices across hibernation (Chen Yu)

  - keep parent resources that start at 0x0 (Ard Biesheuvel)

  - enable ECRC only if device supports it (Bjorn Helgaas)

  - restore PRI and PASID state after Function-Level Reset (CQ Tang)

  - skip DPC event if device is not present (Keith Busch)

  - check domain when matching SMBIOS info (Sujith Pandel)

  - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)

  - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)

  - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)

  - add Switchtec "running" status flag (Logan Gunthorpe)

  - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)

  - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
    Gogada)

  - move VMD SRCU cleanup after bus, child device removal (Jon Derrick)

  - add Faraday clock handling (Linus Walleij)

  - configure Rockchip MPS and reorganize (Shawn Lin)

  - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)

  - support Tegra MSI 64-bit addressing (Thierry Reding)

  - use Rockchip normal (not privileged) register bank (Shawn Lin)

  - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)

  - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
    Gonzalez)

  - add MediaTek PCIe host controller support (Ryder Lee)

  - add Qualcomm IPQ4019 support (John Crispin)

  - add HyperV vPCI protocol v1.2 support (Jork Loeser)

  - add i.MX6 regulator support (Quentin Schulz)

* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller
  PCI: rockchip: Use normal register bank for config accessors
  dt-bindings: PCI: Add documentation for MediaTek PCIe
  PCI: Remove __pci_dev_reset() and pci_dev_reset()
  PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
  PCI: vmd: Move SRCU cleanup after bus, child device removal
  PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
  PCI: versatile: Add local struct device pointers
  PCI: tegra: Do not allocate MSI target memory
  PCI: tegra: Support MSI 64-bit addressing
  PCI: rockchip: Use local struct device pointer consistently
  PCI: rockchip: Check for clk_prepare_enable() errors during resume
  MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
  PCI: rockchip: Configure RC's MPS setting
  PCI: rockchip: Reconfigure configuration space header type
  PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
  PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
  ...
2017-07-08 15:51:57 -07:00
Rafael J. Wysocki
0847684cfc PCI / PM: Simplify device wakeup settings code
After previous changes it is not necessary to distinguish between
device wakeup for run time and device wakeup from system sleep states
any more, so rework the PCI device wakeup settings code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-28 01:52:45 +02:00
Jakub Kicinski
17530e71e0 PCI: Protect pci_driver->sriov_configure() usage with device_lock()
Every method in struct device_driver or structures derived from it like
struct pci_driver MUST provide exclusion vs the driver's ->remove() method,
usually by using device_lock().

Protect use of pci_driver->sriov_configure() by holding the device lock
while calling it.

The PCI core sets the pci_dev->driver pointer in local_pci_probe() before
calling ->probe() and only clears it after ->remove().  This means driver's
->sriov_configure() callback will happily race with probe() and remove(),
most likely leading to BUGs, since drivers don't expect this.

Remove the iov lock completely, since we remove the last user.

[bhelgaas: changelog, thanks to Christoph for locking rule]
Link: http://lkml.kernel.org/r/20170522225023.14010-1-jakub.kicinski@netronome.com
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-14 17:41:19 -05:00
Linus Torvalds
857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Bjorn Helgaas
ef1b5dad5a Merge branch 'pci/virtualization' into next
* pci/virtualization:
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: Call pcie_flr() from reset_chelsio_generic_dev()
  PCI: Call pcie_flr() from reset_intel_82599_sfp_virtfn()
  PCI: Export pcie_flr()
  PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding
  PCI: Avoid FLR for Intel 82579 NICs

Conflicts:
	include/linux/pci.h
2017-04-28 10:36:12 -05:00
Bjorn Helgaas
889e4dd916 Merge branch 'pci/resource-mmap' into next
* pci/resource-mmap:
  ia64: Use generic pci_mmap_resource_range()
  ia64: Remove redundant checks for WC in pci_mmap_page_range()
  ia64: Remove redundant valid_mmap_phys_addr_range() from pci_mmap_page_range()
  PCI: Add I/O BAR support to generic pci_mmap_resource_range()
  x86/PCI: Use generic pci_mmap_resource_range()
  unicore32/PCI: Use generic pci_mmap_resource_range()
  sh/PCI: Use generic pci_mmap_resource_range()
  parisc: Use generic pci_mmap_resource_range()
  mn10300/PCI: Use generic pci_mmap_resource_range()
  MIPS: PCI: Use generic pci_mmap_resource_range()
  cris/PCI: Use generic pci_mmap_resource_range()
  ARM/PCI: Use generic pci_mmap_resource_range()
  PCI: Add pci_mmap_resource_range() and use it for ARM64
  PCI: Add BAR index argument to pci_mmap_page_range()
  PCI: Use BAR index in sysfs attr->private instead of resource pointer
  PCI: Add arch_can_pci_mmap_io() on architectures which can mmap() I/O space
  PCI: Move multiple declarations of pci_mmap_page_range() to <linux/pci.h>
  PCI: Add arch_can_pci_mmap_wc() macro
  xtensa/PCI: Do not mmap PCI BARs to userspace as write-through
  PCI: Only allow WC mmap on prefetchable resources
  PCI: Fix another sanity check bug in /proc/pci mmap
  PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
2017-04-28 10:34:34 -05:00
Bodong Wang
0e7df22401 PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding
Sometimes it is not desirable to bind SR-IOV VFs to drivers.  This can save
host side resource usage by VF instances that will be assigned to VMs.

Add a new PCI sysfs interface "sriov_drivers_autoprobe" to control that
from the PF.  To modify it, echo 0/n/N (disable probe) or 1/y/Y (enable
probe) to:

  /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe

Note that this must be done before enabling VFs.  The change will not take
effect if VFs are already enabled.  Simply, one can disable VFs by setting
sriov_numvfs to 0, choose whether to probe or not, and then re-enable the
VFs by restoring sriov_numvfs.

[bhelgaas: changelog, ABI doc]
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-04-20 08:53:51 -05:00
David Woodhouse
f719582435 PCI: Add pci_mmap_resource_range() and use it for ARM64
Starting to leave behind the legacy of the pci_mmap_page_range() interface
which takes "user-visible" BAR addresses.  This takes just the resource and
offset.

For now, both APIs coexist and depending on the platform, one is
implemented as a wrapper around the other.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20 08:47:47 -05:00
Lukas Wunner
8531e283be PCI: Recognize Thunderbolt devices
Detect on probe whether a PCI device is part of a Thunderbolt controller.
Intel uses a Vendor-Specific Extended Capability (VSEC) with ID 0x1234
on such devices.  Detect presence of this VSEC and cache it in a newly
added is_thunderbolt bit in struct pci_dev.

Also, add a helper to check whether a given PCI device is situated on a
Thunderbolt daisy chain (i.e., below a PCI device with is_thunderbolt
set).

The necessity arises from the following:

* If an external Thunderbolt GPU is connected to a dual GPU laptop,
  that GPU is currently registered with vga_switcheroo even though it
  can neither drive the laptop's panel nor be powered off by the
  platform.  To vga_switcheroo it will appear as if two discrete
  GPUs are present.  As a result, when the external GPU is runtime
  suspended, vga_switcheroo will cut power to the internal discrete GPU
  which may not be runtime suspended at all at this moment.  The
  solution is to not register external GPUs with vga_switcheroo, which
  necessitates a way to recognize if they're on a Thunderbolt daisy
  chain.

* Dual GPU MacBook Pros introduced 2011+ can no longer switch external
  DisplayPort ports between GPUs.  (They're no longer just used for DP
  but have become combined DP/Thunderbolt ports.)  The driver to switch
  the ports, drivers/platform/x86/apple-gmux.c, needs to detect presence
  of a Thunderbolt controller and, if found, keep external ports
  permanently switched to the discrete GPU.

v2: Make kerneldoc for pci_is_thunderbolt_attached() more precise,
    drop portion of commit message pertaining to separate series.
    (Bjorn Helgaas)

Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Amir Levy <amir.jer.levy@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/0ab165a4a35c0b60f29d4c306c653ead14fcd8f9.1489145162.git.lukas@wunner.de
2017-03-30 22:42:30 +02:00
Keith Busch
89ee9f7680 PCI: Add device disconnected state
Add a new state to pci_dev to be set when it is unexpectedly disconnected.
The PCI driver tear down functions can observe this new device state so
they may skip operations that will fail.

The pciehp and pcie-dpc drivers are aware when the link is down, so these
set the flag when their handlers detect the device is disconnected.

Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-03-29 22:54:46 -05:00
Emil Tantilov
5b0948dfe1 PCI: Lock each enable/disable num_vfs operation in sysfs
Enabling/disabling SRIOV via sysfs by echo-ing multiple values
simultaneously:

  # echo 63 > /sys/class/net/ethX/device/sriov_numvfs&
  # echo 63 > /sys/class/net/ethX/device/sriov_numvfs

  # sleep 5

  # echo 0 > /sys/class/net/ethX/device/sriov_numvfs&
  # echo 0 > /sys/class/net/ethX/device/sriov_numvfs

results in the following bug:

  kernel BUG at drivers/pci/iov.c:495!
  invalid opcode: 0000 [#1] SMP
  CPU: 1 PID: 8050 Comm: bash Tainted: G   W   4.9.0-rc7-net-next #2092
  RIP: 0010:[<ffffffff813b1647>]
	    [<ffffffff813b1647>] pci_iov_release+0x57/0x60

  Call Trace:
   [<ffffffff81391726>] pci_release_dev+0x26/0x70
   [<ffffffff8155be6e>] device_release+0x3e/0xb0
   [<ffffffff81365ee7>] kobject_cleanup+0x67/0x180
   [<ffffffff81365d9d>] kobject_put+0x2d/0x60
   [<ffffffff8155bc27>] put_device+0x17/0x20
   [<ffffffff8139c08a>] pci_dev_put+0x1a/0x20
   [<ffffffff8139cb6b>] pci_get_dev_by_id+0x5b/0x90
   [<ffffffff8139cca5>] pci_get_subsys+0x35/0x40
   [<ffffffff8139ccc8>] pci_get_device+0x18/0x20
   [<ffffffff8139ccfb>] pci_get_domain_bus_and_slot+0x2b/0x60
   [<ffffffff813b09e7>] pci_iov_remove_virtfn+0x57/0x180
   [<ffffffff813b0b95>] pci_disable_sriov+0x65/0x140
   [<ffffffffa00a1af7>] ixgbe_disable_sriov+0xc7/0x1d0 [ixgbe]
   [<ffffffffa00a1e9d>] ixgbe_pci_sriov_configure+0x3d/0x170 [ixgbe]
   [<ffffffff8139d28c>] sriov_numvfs_store+0xdc/0x130
  ...
  RIP  [<ffffffff813b1647>] pci_iov_release+0x57/0x60

Use the existing mutex lock to protect each enable/disable operation.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
2017-02-03 13:42:38 -06:00
Bjorn Helgaas
2583157141 Merge branch 'pci/virtualization' into next
* pci/virtualization:
  PCI: Add comments about ROM BAR updating
  PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
  PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
  PCI: Don't update VF BARs while VF memory space is enabled
  PCI: Separate VF BAR updates from standard BAR updates
  PCI: Update BARs using property bits appropriate for type
  PCI: Ignore BAR updates on virtual functions
  PCI: Do any VF BAR updates before enabling the BARs
  PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+
  PCI: Convert Mellanox broken INTx quirks to be for listed devices only
  PCI: Convert broken INTx masking quirks from HEADER to FINAL
  net/mlx4_core: Use device ID defines
  PCI: Add Mellanox device IDs
2016-12-12 11:25:05 -06:00
Bjorn Helgaas
daaed10443 Merge branch 'pci/pm' into next
* pci/pm:
  x86/platform/intel-mid: Constify mid_pci_platform_pm
  PCI: pciehp: Add runtime PM support for PCIe hotplug ports
  ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public
  ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
  PCI: Unfold conditions to block runtime PM on PCIe ports
  PCI: Consolidate conditions to allow runtime PM on PCIe ports
  PCI: Activate runtime PM on a PCIe port only if it can suspend
  PCI: Speed up algorithm in pci_bridge_d3_update()
  PCI: Autosense device removal in pci_bridge_d3_update()
  PCI: Don't acquire ref on parent in pci_bridge_d3_update()
  USB: UHCI: report non-PME wakeup signalling for Intel hardware
  PCI: Check for PME in targeted sleep state
2016-12-12 11:25:04 -06:00
Bjorn Helgaas
c1f2e80c19 Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)
  PCI: Expand "VPD access disabled" quirk message
  PCI: pciehp: Remove loading message
  PCI: hotplug: Remove hotplug core message
  PCI: Remove service driver load/unload messages
  PCI/AER: Log AER IRQ when claiming Root Port
  PCI/AER: Log errors with PCI device, not PCIe service device
  PCI/AER: Remove unused version macros
  PCI/PME: Log PME IRQ when claiming Root Port
  PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors
  PCI: Move config space size macros to pci_regs.h
2016-12-12 11:25:03 -06:00
Wang Sheng-Hui
cc10385b6f PCI: Move config space size macros to pci_regs.h
Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and
PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to
include/uapi/linux/pci_regs.h so they can be used by more drivers and
eliminate duplicate definitions.

[bhelgaas: Expand comment to include PCI-X details]
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12 10:05:22 -06:00
Dongdong Liu
169de969c0 PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platform
The acpi_get_rc_resources() is used to get the RC register address that can
not be described in MCFG.  It takes the _HID & segment to look for and
outputs the RC address resource.  Use PNP0C02 devices to describe such RC
address resource.  Use _UID to match segment to tell which root bus the
PNP0C02 resource belongs to.

[bhelgaas: add dev argument, wrap in #ifdef CONFIG_PCI_QUIRKS]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:49 -06:00
Bjorn Helgaas
286c2378aa PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
pci_std_update_resource() only deals with standard BARs, so we don't have
to worry about the complications of VF BARs in an SR-IOV capability.

Compute the BAR address inline and remove pci_resource_bar().  That makes
pci_iov_resource_bar() unused, so remove that as well.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29 18:05:09 -06:00
Bjorn Helgaas
6ffa2489c5 PCI: Separate VF BAR updates from standard BAR updates
Previously pci_update_resource() used the same code path for updating
standard BARs and VF BARs in SR-IOV capabilities.

Split the VF BAR update into a new pci_iov_update_resource() internal
interface, which makes it simpler to compute the BAR address (we can get
rid of pci_resource_bar() and pci_iov_resource_bar()).

This patch:

  - Renames pci_update_resource() to pci_std_update_resource(),
  - Adds pci_iov_update_resource(),
  - Makes pci_update_resource() a wrapper that calls the appropriate one,

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29 18:05:09 -06:00
Lukas Wunner
c6a6330706 PCI: Activate runtime PM on a PCIe port only if it can suspend
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even
if it will never actually suspend because the BIOS is too old or the
"pcie_port_pm=off" option was specified on the kernel command line.

A few CPU cycles can be saved by not activating runtime PM at all in these
cases, because rpm_idle() and rpm_suspend() will bail out right at the
beginning when calling rpm_check_suspend_allowed(), instead of carrying out
various locking and assignments, invoking rpm_callback(), getting back
-EBUSY and rolling everything back.

The conditions checked in pci_bridge_d3_possible() are all static, they
never change during uptime of the system, hence it's safe to call this to
determine if runtime PM should be activated.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:46:06 -06:00
Lukas Wunner
1ed276a7b9 PCI: Autosense device removal in pci_bridge_d3_update()
The algorithm to update the flag indicating whether a bridge may go to D3
makes a few optimizations based on whether the update was caused by the
removal of a device on the one hand, versus the addition of a device or the
change of its D3cold flags on the other hand.

The information whether the update pertains to a removal is currently
passed in by the caller, but the function may as well determine that itself
by examining the device in question, thereby allowing for a considerable
simplification and reduction of the code.

Out of several options to determine removal, I've chosen the function
device_is_registered() because it's cheap:  It merely returns the
dev->kobj.state_in_sysfs flag.  That flag is set through device_add() when
the root bus is scanned and cleared through device_remove().  The call to
pci_bridge_d3_update() happens after each of these calls, respectively, so
the ordering is correct.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:44:56 -06:00
Bjorn Helgaas
3f4f35678f Merge branch 'pci/pm' into next
* pci/pm:
  PCI: Avoid unnecessary resume after direct-complete
  PCI: Recognize D3cold in pci_update_current_state()
  PCI: Query platform firmware for device power state
  PCI: Afford direct-complete to devices with non-standard PM
2016-10-03 09:43:21 -05:00
Lukas Wunner
cc7cc02bad PCI: Query platform firmware for device power state
Usually the most accurate way to determine a PCI device's power state is to
read its PM Control & Status Register.  There are two cases however when
this is not an option:  If the device doesn't have the PM capability at
all, or if it is in D3cold (in which case its config space is
inaccessible).

In both cases, we can alternatively query the platform firmware for its
opinion on the device's power state.  To facilitate this, augment struct
pci_platform_pm_ops with a ->get_power callback and implement it for
acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far).

It is used by a forthcoming commit to let pci_update_current_state()
recognize D3cold.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28 11:46:51 -05:00
Jonathan Yong
9bb04a0c4e PCI: Add Precision Time Measurement (PTM) support
Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22).

Enable PTM on PTM Root devices and switch ports.  This does not enable PTM
on endpoints.

There currently are no PTM-capable devices on the market, but it is
expected to be supported by the Intel Apollo Lake platform.

[bhelgaas: complete rework]
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-15 13:44:08 -05:00
Mika Westerberg
9d26d3a8f1 PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered.  Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.

With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:

  - The PCIe port hardware is recent enough, starting from 2015.

  - Devices connected to PCIe ports are effectively in D3cold once the port
    is transitioned to D3 (the config space is not accessible anymore and
    the link may be powered down).

  - Devices behind the PCIe port need to be allowed to transition to D3cold
    and back.  There is a way both drivers and userspace can forbid this.

  - If the device behind the PCIe port is capable of waking the system it
    needs to be able to do so from D3cold.

This patch adds a new flag to struct pci_device called 'bridge_d3'.  This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port.  When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.

Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.

Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-13 14:57:36 -05:00
Hariprasad Shenai
cb92148b58 PCI: Add pci_set_vpd_size() to set VPD size
After 104daa71b3 ("PCI: Determine actual VPD size on first access"), the
PCI core computes the valid VPD size by parsing the VPD starting at offset
0x0.  We don't attempt to read past that valid size because that causes
some devices to crash.

However, some devices do have data past that valid size.  For example,
Chelsio adapters contain two VPD structures, and the driver needs both of
them.

Add pci_set_vpd_size().  If a driver knows it is safe to read past the end
of the VPD data structure at offset 0, it can use pci_set_vpd_size() to
allow access to as much data as it needs.

[bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and
return int (not ssize_t)]
Fixes: 104daa71b3 ("PCI: Determine actual VPD size on first access")
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-15 13:00:11 -05:00
Bjorn Helgaas
408641e93a PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
We only support one flavor of VPD, so there's no need to complicate things
by having a "generic" struct pci_vpd and a more specific struct
pci_vpd_pci22.

Fold struct pci_vpd_pci22 directly into struct pci_vpd.

[bhelgaas: remove NULL check before kfree of dev->vpd (per kfreeaddr.cocci)]
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:36 -06:00
Bjorn Helgaas
f1cd93f9aa PCI: Rename VPD symbols to remove unnecessary "pci22"
There's only one kind of VPD, so we don't need to qualify it as "the
version described by PCI spec rev 2.2."

Rename the following symbols to remove unnecessary "pci22":

  PCI_VPD_PCI22_SIZE	-> PCI_VPD_MAX_SIZE
  pci_vpd_pci22_size()	-> pci_vpd_size()
  pci_vpd_pci22_wait()	-> pci_vpd_wait()
  pci_vpd_pci22_read()	-> pci_vpd_read()
  pci_vpd_pci22_write()	-> pci_vpd_write()
  pci_vpd_pci22_ops	-> pci_vpd_ops
  pci_vpd_pci22_init()	-> pci_vpd_init()

Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:31 -06:00
Bjorn Helgaas
da00684723 PCI: Remove struct pci_vpd_ops.release function pointer
The struct pci_vpd_ops.release function pointer is always
pci_vpd_pci22_release(), so there's no need for the flexibility of a
function pointer.

Inline the pci_vpd_pci22_release() body into pci_vpd_release() and remove
pci_vpd_pci22_release() and the struct pci_vpd_ops.release function
pointer.

Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:24 -06:00
Bjorn Helgaas
64379079a9 PCI: Move pci_vpd_release() from header file to pci/access.c
Move pci_vpd_release() so it's next to the other VPD functions.  This puts
it next to pci_vpd_pci22_init(), which allocates the space freed by
pci_vpd_release().

Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:16 -06:00
Linus Torvalds
d43421565b PCI changes for the v4.5 merge window:
Enumeration
     Simplify config space size computation (Bjorn Helgaas)
     Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
     Support PCIe devices with short cfg_size (Jason S. McMullan)
     Add Netronome vendor and device IDs (Jason S. McMullan)
     Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
     Add Netronome NFP4000 PF device ID (Simon Horman)
     Limit config space size for Netronome NFP4000 (Simon Horman)
     Print warnings for all invalid expansion ROM headers (Vladis Dronov)
 
   Resource management
     Fix minimum allocation address overwrite (Christoph Biedl)
 
   PCI device hotplug
     acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
     pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
     shpchp: Constify hpc_ops structure (Julia Lawall)
     ibmphp: Remove unneeded NULL test (Julia Lawall)
 
   Power management
     Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
 
   Virtualization
     Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
 
   MSI
     Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
     Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
     Initialize MSI capability for all architectures (Guilherme G. Piccoli)
     Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
 
   ARM Versatile host bridge driver
     Remove unused pci_sys_data structures (Lorenzo Pieralisi)
 
   Broadcom iProc host bridge driver
     Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
     Do not use 0x in front of %pap (Dmitry V. Krivenok)
     Update iProc PCIe device tree binding (Ray Jui)
     Add PAXC interface support (Ray Jui)
     Add iProc PCIe MSI device tree binding (Ray Jui)
     Add iProc PCIe MSI support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Use gpio_set_value_cansleep() (Fabio Estevam)
     Add support for active-low reset GPIO (Petr Štetiar)
 
   HiSilicon host bridge driver
     Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
 
   Intel VMD host bridge driver
     Export irq_domain_set_info() for module use (Keith Busch)
     x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
     Use 32 bit PCI domain numbers (Keith Busch)
     Add driver for Intel Volume Management Device (VMD) (Keith Busch)
 
   Qualcomm host bridge driver
     Document PCIe devicetree bindings (Stanimir Varbanov)
     Add Qualcomm PCIe controller driver (Stanimir Varbanov)
     dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
     dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
 
   Renesas R-Car host bridge driver
     Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
     Allow DT to override default window settings (Phil Edworthy)
     Convert to DT resource parsing API (Phil Edworthy)
     Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
     Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
     Add runtime PM support to pcie-rcar (Phil Edworthy)
     Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
     Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
     Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     Simplify control flow (Bjorn Helgaas)
     Make config accessor override checking symmetric (Bjorn Helgaas)
     Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
 
   Miscellaneous
     Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
     Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
     Fix all whitespace issues (Bogicevic Sasa)
     x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
     Use to_pci_dev() instead of open-coding it (Geliang Tang)
     Use kobj_to_dev() instead of open-coding it (Geliang Tang)
     Use list_for_each_entry() to simplify code (Geliang Tang)
     Fix typos in <linux/msi.h> (Thomas Petazzoni)
     x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWoQIuAAoJEFmIoMA60/r8ckYP/0ZrkANeN1SB5cQVi2k7aceq
 kQb1Hk6ifxohJvgpJ/iwmVCHoApyeBfUBfrC+fUpIC2f7ncPsE5HNyjqpAWzFzj2
 sYWwY029yjBQ9g4mPhkvjBXfha+lNtLthWc+Xxcat5pdcyG63Dg4SfJKWm2ZYnbN
 0GJzyRZXIwAMnNf0KIr61Aqru0nXeHvi5wblyJ08UZ7AcNzCtB0wKLmE3S6SeZVF
 f2fry35zcGu+TFvQ1hAYemfl3XyDBJ87nPiKzJAwYSaKcWPFWt+72PBDPO6X9squ
 6prm4nmAgeG2Oo4Zu0fbkDlB2bEsWUc14/xT0i5Wfs35vcwzF+S1zirJAtVqoNir
 NgC7fSbEHbsS7FZOz0rBOBIvIkbb6NdfLFuZqUFv0X1M5bRFywjo8lZRfAYoGJzK
 Mmus0uKbklx5m6RT5adf9+Plev1YJT6XZW9XrDpGnxrwRyPjHmyvuTWsYkumxY7Q
 CE5Wr3p7q2I2+MtrQVv2D9Nzsb+4zQ6BgHrd2vwR/IxTsfdXLU7+B691wkUDX8No
 UKFxBd0FiVCn+srG96u7lWQvdoUqoNCogTZSVzGR5gFBv3zAN9gi8HS7NbV558Mg
 Io3Xw+6dcbG33uvWdU6jHEDLMQsohZcp05Q5esCgRQNV4cGJbPxBDtOZEO/ezvW4
 FAI7lfgYTFiQK3NzE3Ng
 =z9mQ
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.5 merge window:

  Enumeration:
   - Simplify config space size computation (Bjorn Helgaas)
   - Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
   - Support PCIe devices with short cfg_size (Jason S. McMullan)
   - Add Netronome vendor and device IDs (Jason S. McMullan)
   - Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
   - Add Netronome NFP4000 PF device ID (Simon Horman)
   - Limit config space size for Netronome NFP4000 (Simon Horman)
   - Print warnings for all invalid expansion ROM headers (Vladis Dronov)

  Resource management:
   - Fix minimum allocation address overwrite (Christoph Biedl)

  PCI device hotplug:
   - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
   - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
   - shpchp: Constify hpc_ops structure (Julia Lawall)
   - ibmphp: Remove unneeded NULL test (Julia Lawall)

  Power management:
   - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)

  Virtualization
   - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)

  MSI:
   - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
   - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
   - Initialize MSI capability for all architectures (Guilherme G. Piccoli)
   - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)

  ARM Versatile host bridge driver:
   - Remove unused pci_sys_data structures (Lorenzo Pieralisi)

  Broadcom iProc host bridge driver:
   - Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
   - Do not use 0x in front of %pap (Dmitry V. Krivenok)
   - Update iProc PCIe device tree binding (Ray Jui)
   - Add PAXC interface support (Ray Jui)
   - Add iProc PCIe MSI device tree binding (Ray Jui)
   - Add iProc PCIe MSI support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Use gpio_set_value_cansleep() (Fabio Estevam)
   - Add support for active-low reset GPIO (Petr Štetiar)

  HiSilicon host bridge driver:
   - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)

  Intel VMD host bridge driver:
   - Export irq_domain_set_info() for module use (Keith Busch)
   - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
   - Use 32 bit PCI domain numbers (Keith Busch)
   - Add driver for Intel Volume Management Device (VMD) (Keith Busch)

  Qualcomm host bridge driver:
   - Document PCIe devicetree bindings (Stanimir Varbanov)
   - Add Qualcomm PCIe controller driver (Stanimir Varbanov)
   - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
   - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)

  Renesas R-Car host bridge driver:
   - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
   - Allow DT to override default window settings (Phil Edworthy)
   - Convert to DT resource parsing API (Phil Edworthy)
   - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
   - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
   - Add runtime PM support to pcie-rcar (Phil Edworthy)
   - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
   - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
   - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - Simplify control flow (Bjorn Helgaas)
   - Make config accessor override checking symmetric (Bjorn Helgaas)
   - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)

  Miscellaneous:
   - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
   - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
   - Fix all whitespace issues (Bogicevic Sasa)
   - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
   - Use to_pci_dev() instead of open-coding it (Geliang Tang)
   - Use kobj_to_dev() instead of open-coding it (Geliang Tang)
   - Use list_for_each_entry() to simplify code (Geliang Tang)
   - Fix typos in <linux/msi.h> (Thomas Petazzoni)
   - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"

* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
  PCI: Limit config space size for Netronome NFP4000
  PCI: Add Netronome NFP4000 PF device ID
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  PCI: host: Add of_pci_get_host_bridge_resources() stub
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
  PCI: rcar: Add Gen2 PHY setup to pcie-rcar
  PCI: rcar: Add runtime PM support to pcie-rcar
  PCI: designware: Make config accessor override checking symmetric
  PCI: ibmphp: Remove unneeded NULL test
  ARM: dts: ifc6410: enable PCIe DT node for this board
  ARM: dts: apq8064: add PCIe devicetree node
  PCI: hotplug: Use list_for_each_entry() to simplify code
  PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
  PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
  PCI: Avoid iterating through memory outside the resource window
  PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
  ...
2016-01-21 11:52:16 -08:00
Julia Lawall
299f2ffed3 PCI / PM: constify pci_platform_pm_ops structure
The pci_platform_pm_ops structure is never modified, so declare it as
const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09 01:34:32 +01:00
Bjorn Helgaas
128fc68ca1 PCI/MSI: Remove empty pci_msi_init_pci_dev()
4a7cc83167 ("genirq/MSI: Move msi_list from struct pci_dev to struct
device") removed the contents of pci_msi_init_pci_dev().  All
implementation of it are now empty, so remove it completely.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-30 19:35:53 -06:00
Gabriele Paoloni
7c7a0e9453 ARM/PCI: Move align_resource function pointer to pci_host_bridge structure
Commit b3a72384fe ("ARM/PCI: Replace pci_sys_data->align_resource with
global function pointer") introduced an ARM-specific align_resource()
function pointer.  This is not portable to other arches and doesn't work
for platforms with two different PCIe host bridge controllers.

Move the function pointer to the pci_host_bridge structure so each host
bridge driver can specify its own align_resource() function.

Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2015-11-25 13:23:38 -06:00
Linus Torvalds
3c87b79188 PCI changes for the v4.4 merge window:
Resource management
     Add support for Enhanced Allocation devices (Sean O. Stalley)
     Add Enhanced Allocation register entries (Sean O. Stalley)
     Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
     Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
     Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
     Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
     Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
     Expand Enhanced Allocation BAR output (Bjorn Helgaas)
     Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Add sparc mem64 resource parsing for root bus (Yinghai Lu)
 
   PCI device hotplug
     pciehp: Queue power work requests in dedicated function (Guenter Roeck)
 
   Driver binding
     Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
 
   Virtualization
     Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
     Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
     Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
     Reorder pcibios_sriov_disable() (Alexander Duyck)
     Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
     Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
     Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
     Don't try to restore VF BARs (Wei Yang)
 
   MSI
     Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
     Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
     Export all remapped MSIs to sysfs attributes (Romain Bezut)
     Disable MSI on SiS 761 (Ondrej Zary)
 
   AER
     Clear error status registers during enumeration and restore (Taku Izumi)
 
   Generic host bridge driver
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Allow multiple hosts with different map_bus() methods (David Daney)
     Pass starting bus number to pci_scan_root_bus() (David Daney)
     Fix address window calculation for non-zero starting bus (David Daney)
 
   Altera host bridge driver
     Add msi.h to ARM Kbuild (Ley Foon Tan)
     Add Altera PCIe host controller driver (Ley Foon Tan)
     Add Altera PCIe MSI driver (Ley Foon Tan)
 
   APM X-Gene host bridge driver
     Remove msi_controller assignment (Duc Dang)
 
   Broadcom iProc host bridge driver
     Fix header comment "Corporation" misspelling (Florian Fainelli)
     Fix code comment to match code (Ray Jui)
     Remove unused struct iproc_pcie.irqs[] (Ray Jui)
     Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
     Fix PCIe reset logic (Ray Jui)
     Improve link detection logic (Ray Jui)
     Update PCIe device tree bindings (Ray Jui)
     Add outbound mapping support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Return real error code from imx6_add_pcie_port() (Fabio Estevam)
     Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
 
   Freescale Layerscape host bridge driver
     Remove ls_pcie_establish_link() (Minghuan Lian)
     Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
     Factor out SCFG related function (Minghuan Lian)
     Update ls_add_pcie_port() (Minghuan Lian)
     Remove unused fields from struct ls_pcie (Minghuan Lian)
     Add support for LS1043a and LS2080a (Minghuan Lian)
     Add ls_pcie_msi_host_init() (Minghuan Lian)
 
   HiSilicon host bridge driver
     Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
 
   Marvell MVEBU host bridge driver
     Return zero for reserved or unimplemented config space (Russell King)
     Use exact config access size; don't read/modify/write (Russell King)
     Use of_get_available_child_count() (Russell King)
     Use for_each_available_child_of_node() to walk child nodes (Russell King)
     Report full node name when reporting a DT error (Russell King)
     Use port->name rather than "PCIe%d.%d" (Russell King)
     Move port parsing and resource claiming to  separate function (Russell King)
     Fix memory leaks and refcount leaks (Russell King)
     Split port parsing and resource claiming from  port setup (Russell King)
     Use gpio_set_value_cansleep() (Russell King)
     Use devm_kcalloc() to allocate an array (Russell King)
     Use gpio_desc to carry around gpio (Russell King)
     Improve clock/reset handling (Russell King)
     Add PCI Express root complex capability block (Russell King)
     Remove code restricting accesses to slot 0 (Russell King)
 
   NVIDIA Tegra host bridge driver
     Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
 
   Renesas R-Car host bridge driver
     Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
     Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
     Make PCI aware of the I/O resources (Phil Edworthy)
     Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
     Set root bus nr to that provided in DT (Phil Edworthy)
     Fix I/O offset for multiple host bridges (Phil Edworthy)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
 
   Synopsys DesignWare host bridge driver
     Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
     Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
     Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
     Require config accesses to be naturally aligned (Gabriele Paoloni)
     Make "num-lanes" an optional DT property (Gabriele Paoloni)
     Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
     Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
     Factor out MSI msg setup (Lucas Stach)
     Implement multivector MSI IRQ setup (Lucas Stach)
     Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
     Set up high part of MSI target address (Lucas Stach)
     Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
     Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
     Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
     Make driver arch-agnostic (Zhou Wang)
 
   Miscellaneous
     Make x86 pci_subsys_init() static (Alexander Kuleshov)
     Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPM9aAAoJEFmIoMA60/r89f8QALFMHegqKk5M08ZcCaG7unLF
 5U5t88y6KF/kNYF6HOqLQiHh79U3ToU5HdrNaAtutr0UnvgbFC2WulLqKYgLiq6Y
 YJnwR3EfgGmdG7DKAVAXq19+nc2hgTPAEe8sciU7HKlTbqQmGj6//y3sQULGNLx3
 zur0C33DCtrDgKDP7to273lkHO8Vl0YuLzyqwt0ePCMNcXR0h1dK8QxSTjuXBxaR
 c+T1V1Hw64MTxLz3xJd1/1ipy32u+9LnqqcdRz0zRq6qi48G9ch/i4Z6DHa8kTbj
 DUZrrTYKILQ2TcjcZSBmTueX11Z1Xa4/I/45sehIi6gVWL9qQbmGpt2E5YtFED+4
 GdcmBSbWG/qsNsabXk38uiM3ww7+ltXEOhTXbcK+EgjvIhE6gSK/plYG0fU9pybs
 AKViEXVdHoT1X0N1dLK12mq7kvDCQvShHn08lz97Q9YrZ32wv1Fnij6WVSbJvfWt
 DubtPtisVM+rVy+VTpOImNR9wO54lTmG5jK53yNqH7I20K89y1kqARlN9nMXMB1a
 2nQnwe9yWlsGj9gVNCn1KmyQSPOWjg+3Z+ekfwbxpca14s1AaN3Jm0N9Z61dXFoF
 y2ygoQtZ/z9BHr3quBpxXGt+aVUg2kcNw5GYeDYiALxXdJSObyzRrZ6HDb/zicU2
 ZH9hBj0ctXvucmy6I2mt
 =uZrt
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Resource management:
   - Add support for Enhanced Allocation devices (Sean O. Stalley)
   - Add Enhanced Allocation register entries (Sean O. Stalley)
   - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
   - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
   - Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
   - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
   - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
   - Expand Enhanced Allocation BAR output (Bjorn Helgaas)
   - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Add sparc mem64 resource parsing for root bus (Yinghai Lu)

  PCI device hotplug:
   - pciehp: Queue power work requests in dedicated function (Guenter Roeck)

  Driver binding:
   - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)

  Virtualization:
   - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
   - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
   - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
   - Reorder pcibios_sriov_disable() (Alexander Duyck)
   - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
   - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
   - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
   - Don't try to restore VF BARs (Wei Yang)

  MSI:
   - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
   - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
   - Export all remapped MSIs to sysfs attributes (Romain Bezut)
   - Disable MSI on SiS 761 (Ondrej Zary)

  AER:
   - Clear error status registers during enumeration and restore (Taku Izumi)

  Generic host bridge driver:
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Allow multiple hosts with different map_bus() methods (David Daney)
   - Pass starting bus number to pci_scan_root_bus() (David Daney)
   - Fix address window calculation for non-zero starting bus (David Daney)

  Altera host bridge driver:
   - Add msi.h to ARM Kbuild (Ley Foon Tan)
   - Add Altera PCIe host controller driver (Ley Foon Tan)
   - Add Altera PCIe MSI driver (Ley Foon Tan)

  APM X-Gene host bridge driver:
   - Remove msi_controller assignment (Duc Dang)

  Broadcom iProc host bridge driver:
   - Fix header comment "Corporation" misspelling (Florian Fainelli)
   - Fix code comment to match code (Ray Jui)
   - Remove unused struct iproc_pcie.irqs[] (Ray Jui)
   - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
   - Fix PCIe reset logic (Ray Jui)
   - Improve link detection logic (Ray Jui)
   - Update PCIe device tree bindings (Ray Jui)
   - Add outbound mapping support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Return real error code from imx6_add_pcie_port() (Fabio Estevam)
   - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)

  Freescale Layerscape host bridge driver:
   - Remove ls_pcie_establish_link() (Minghuan Lian)
   - Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
   - Factor out SCFG related function (Minghuan Lian)
   - Update ls_add_pcie_port() (Minghuan Lian)
   - Remove unused fields from struct ls_pcie (Minghuan Lian)
   - Add support for LS1043a and LS2080a (Minghuan Lian)
   - Add ls_pcie_msi_host_init() (Minghuan Lian)

  HiSilicon host bridge driver:
   - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)

  Marvell MVEBU host bridge driver:
   - Return zero for reserved or unimplemented config space (Russell King)
   - Use exact config access size; don't read/modify/write (Russell King)
   - Use of_get_available_child_count() (Russell King)
   - Use for_each_available_child_of_node() to walk child nodes (Russell King)
   - Report full node name when reporting a DT error (Russell King)
   - Use port->name rather than "PCIe%d.%d" (Russell King)
   - Move port parsing and resource claiming to  separate function (Russell King)
   - Fix memory leaks and refcount leaks (Russell King)
   - Split port parsing and resource claiming from  port setup (Russell King)
   - Use gpio_set_value_cansleep() (Russell King)
   - Use devm_kcalloc() to allocate an array (Russell King)
   - Use gpio_desc to carry around gpio (Russell King)
   - Improve clock/reset handling (Russell King)
   - Add PCI Express root complex capability block (Russell King)
   - Remove code restricting accesses to slot 0 (Russell King)

  NVIDIA Tegra host bridge driver:
   - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)

  Renesas R-Car host bridge driver:
   - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
   - Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
   - Make PCI aware of the I/O resources (Phil Edworthy)
   - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
   - Set root bus nr to that provided in DT (Phil Edworthy)
   - Fix I/O offset for multiple host bridges (Phil Edworthy)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)

  Synopsys DesignWare host bridge driver:
   - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
   - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
   - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
   - Require config accesses to be naturally aligned (Gabriele Paoloni)
   - Make "num-lanes" an optional DT property (Gabriele Paoloni)
   - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
   - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
   - Factor out MSI msg setup (Lucas Stach)
   - Implement multivector MSI IRQ setup (Lucas Stach)
   - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
   - Set up high part of MSI target address (Lucas Stach)
   - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
   - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
   - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
   - Make driver arch-agnostic (Zhou Wang)

  Miscellaneous:
   - Make x86 pci_subsys_init() static (Alexander Kuleshov)
   - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"

* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: altera: Add Altera PCIe MSI driver
  PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  ...
2015-11-06 11:29:53 -08:00
Sean O. Stalley
938174e59f PCI: Add support for Enhanced Allocation devices
Add support for devices using Enhanced Allocation entries instead of BARs.
This allows the kernel to parse the EA Extended Capability structure in PCI
config space and claim the BAR-equivalent resources.

See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf

[bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate
declarations, print unknown property in hex to match spec]
Signed-off-by: Sean O. Stalley <sean.stalley@intel.com>
[david.daney@cavium.com: Add more support/checking for Entry Properties,
allow EA behind bridges, rewrite some error messages.]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-29 17:35:39 -05:00
Rafael J. Wysocki
2cef548adf PCI / PM: Avoid resuming more devices during system suspend
Commit bac2a909a0 (PCI / PM: Avoid resuming PCI devices during
system suspend) introduced a mechanism by which some PCI devices that
were runtime-suspended at the system suspend time might be left in
that state for the duration of the system suspend-resume cycle.
However, it overlooked devices that were marked as capable of waking
up the system just because PME support was detected in their PCI
config space.

Namely, in that case, device_can_wakeup(dev) returns 'true' for the
device and if the device is not configured for system wakeup,
device_may_wakeup(dev) returns 'false' and it will be resumed during
system suspend even though configuring it for system wakeup may not
really make sense at all.

To avoid this problem, simply disable PME for PCI devices that have
not been configured for system wakeup and are runtime-suspended at
the system suspend time for the duration of the suspend-resume cycle.

If the device is in D3cold, its config space is not available and it
shouldn't be written to, but that's only possible if the device
has platform PM support and the platform code is responsible for
checking whether or not the device's configuration is suitable for
system suspend in that case.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-12 22:29:57 +02:00
Wei Yang
fff905f329 PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirks
Some quirks search for a HyperTransport capability and use a hard-coded TTL
value of 48 to avoid an infinite loop.

Move the definition of PCI_FIND_CAP_TTL to pci.h and use it instead of the
hard-coded TTL values.

[bhelgaas: changelog]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-07-14 23:35:36 -05:00
Bjorn Helgaas
0ff9b9bad6 Merge branches 'pci/aspm', 'pci/enumeration', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/resource' and 'pci/virtualization' into next
* pci/aspm:
  PCI/ASPM: Simplify Clock Power Management setting
  PCI: Use dev->has_secondary_link to find downstream PCIe links
  PCI/ASPM: Use dev->has_secondary_link to find downstream links
  PCI: Add dev->has_secondary_link to track downstream PCIe links
  PCI/ASPM: Remove redundant PCIe port type checking
  PCI/ASPM: Drop __pci_disable_link_state() useless "force" parameter

* pci/enumeration:
  PCI: Remove unused pci_scan_bus_parented()
  xen/pcifront: Don't use deprecated function pci_scan_bus_parented()
  PCI: designware: Use pci_scan_root_bus() for simplicity
  PCI: tegra: Remove tegra_pcie_scan_bus()
  PCI: mvebu: Remove mvebu_pcie_scan_bus()

* pci/hotplug:
  PCI: pciehp: Wait for hotplug command completion where necessary
  PCI: Propagate the "ignore hotplug" setting to parent
  ACPI / hotplug / PCI: Check ignore_hotplug for all downstream devices
  PCI: pciehp: Drop pointless label from pciehp_probe()
  PCI: pciehp: Drop pointless ACPI-based "slot detection" check

* pci/misc:
  PCI: Remove unused pci_dma_burst_advice()
  PCI: Remove unused pcibios_select_root() (again)
  PCI: Remove unnecessary #includes of <asm/pci.h>
  PCI: Include <linux/pci.h>, not <asm/pci.h>

* pci/msi:
  PCI/MSI: Remove unused pci_msi_off()
  PCI/MSI: Drop pci_msi_off() calls from quirks
  ntb: Drop pci_msi_off() call during probe
  virtio_pci: drop pci_msi_off() call during probe
  PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI
  PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl()
  PCI/MSI: Rename msi_set_enable(), msix_clear_and_set_ctrl()

* pci/resource:
  PCI: Add pci_bus_addr_t

* pci/virtualization:
  ACPI / PCI: Account for ARI in _PRT lookups
  PCI: Move pci_ari_enabled() to global header
  PCI: Add function 1 DMA alias quirk for Marvell 9120
  PCI: Add ACS quirks for Intel 9-series PCH root ports
2015-06-12 15:26:45 -05:00
Alex Williamson
19bdb6e4ec PCI: Move pci_ari_enabled() to global header
pci_ari_enabled() is useful outside of drivers/pci, particularly for
deriving INTx routing via ACPI _PRT, so move it to the global header.
Also convert to bool return.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-29 17:14:17 -05:00
Michael S. Tsirkin
6a25f5e35a PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl()
Move pci_msi_set_enable() and pci_msix_clear_and_set_ctrl() to
drivers/pci/pci.h so they're available even when MSI isn't configured
into the kernel.

No functional change.

[bhelgaas: changelog, split into separate patch]
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
2015-05-07 09:52:21 -05:00
Linus Torvalds
d19d5efd8c powerpc updates for 4.1
- Numerous minor fixes, cleanups etc.
 - More EEH work from Gavin to remove its dependency on device_nodes.
 - Memory hotplug implemented entirely in the kernel from Nathan Fontenot.
 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.
 - Rewrite of VPHN parsing logic & tests from Greg Kurz.
 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.
 - Support for pstore on powernv from Hari Bathini.
 - Removal of old powerpc specific byte swap routines by David Gibson.
 - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing
   your firmware when it wasn't.
 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.
 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek.
 - Some fixes for migration from Tyrel Datwyler.
 - A new syscall to switch the cpu endian by Michael Ellerman.
 - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn.
 - A fix for the OPAL sensor driver from Cédric Le Goater.
 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.
 - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per
   machine.
 - Small patch from Sam Bobroff to explicitly abort non-suspended transactions
   on syscalls, plus a test to exercise it.
 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.
 - Small patch to enable the hard lockup detector from Anton Blanchard.
 - Fix from Dave Olson for missing L2 cache information on some CPUs.
 - Some fixes from Michael Ellerman to get Cell machines booting again.
 - Freescale updates from Scott: Highlights include BMan device tree nodes, an
   MSI erratum workaround, a couple minor performance improvements, config
   updates, and misc fixes/cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVL2cxAAoJEFHr6jzI4aWAR8cP/19VTo/CzCE4ffPSx7qR464n
 F+WFZcbNjIMXu6+B0YLuJZEsuWtKKrCit/MCg3+mSgE4iqvxmtI+HDD0445Buszj
 UD4E4HMdPrXQ+KUSUDORvRjv/FFUXIa94LSv/0g2UeMsPz/HeZlhMxEu7AkXw9Nf
 rTxsmRTsOWME85Y/c9ss7XHuWKXT3DJV7fOoK9roSaN3dJAuWTtG3WaKS0nUu0ok
 0M81D6ZczoD6ybwh2DUMPD9K6SGxLdQ4OzQwtW6vWzcQIBDfy5Pdeo0iAFhGPvXf
 T4LLPkv4cF4AwHsAC4rKDPHQNa+oZBoLlScrHClaebAlDiv+XYKNdMogawUObvSh
 h7avKmQr0Ygp1OvvZAaXLhuDJI9FJJ8lf6AOIeULgHsDR9SyKMjZWxRzPe11uarO
 Fyi0qj3oJaQu6LjazZraApu8mo+JBtQuD3z3o5GhLxeFtBBF60JXj6zAXJikufnl
 kk1/BUF10nKUhtKcDX767AMUCtMH3fp5hx8K/z9T5v+pobJB26Wup1bbdT68pNBT
 NjdKUppV6QTjZvCsA6U2/ECu6E9KeIaFtFSL2IRRoiI0dWBN5/5eYn3RGkO2ZFoL
 1NdwKA2XJcchwTPkpSRrUG70sYH0uM2AldNYyaLfjzrQqza7Y6lF699ilxWmCN/H
 OplzJAE5cQ8Am078veTW
 =03Yh
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile
2015-04-16 13:53:32 -05:00
Aaron Lu
3390e0850b PCI: Export pci_find_host_bridge() for use inside PCI core
The find_pci_host_bridge() function can be useful to other PCI code so
export it.  Change its name to pci_find_host_bridge().

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-08 14:49:20 -05:00
Wei Yang
4449f07972 PCI: Calculate maximum number of buses required for VFs
An SR-IOV device can change its First VF Offset and VF Stride based on the
values of ARI Capable Hierarchy and NumVFs.  The number of buses required
for all VFs is determined by NumVFs, First VF Offset, and VF Stride (see
SR-IOV spec r1.1, sec 2.1.2).

Previously pci_iov_bus_range() computed how many buses would be required by
TotalVFs, but this was based on a single NumVFs value and may not have been
the maximum for all NumVFs configurations.

Iterate over all valid NumVFs and calculate the maximum number of bus
numbers that could ever be required for VFs of this device.

[bhelgaas: changelog, compute busnr of NumVFs, not TotalVFs, remove
kerenl-doc comment marker]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Wei Yang
0e6c9122a6 PCI: Keep individual VF BAR size in struct pci_sriov
Currently we don't store the individual VF BAR size.  We calculate it when
needed by dividing the PF's IOV resource size (which contains space for
*all* the VFs) by total_VFs or by reading the BAR in the SR-IOV capability
again.

Keep the individual VF BAR size in struct pci_sriov.barsz[], add
pci_iov_resource_size() to retrieve it, and use that instead of doing the
division or reading the SR-IOV capability BAR.

[bhelgaas: rename to "barsz[]", simplify barsz[] index computation, remove
SR-IOV capability BAR sizing]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:35 +11:00
Rafael J. Wysocki
2f8c42f31c Merge branches 'pm-pci' and 'pm-cpuidle'
* pm-pci:
  PCI / PM: Avoid resuming PCI devices during system suspend

* pm-cpuidle:
  drivers: cpuidle: Don't initialize big.LITTLE driver if MCPM is unavailable
2015-02-10 16:07:10 +01:00
Rafael J. Wysocki
bac2a909a0 PCI / PM: Avoid resuming PCI devices during system suspend
Commit f25c0ae2b4 (ACPI / PM: Avoid resuming devices in ACPI PM
domain during system suspend) modified the ACPI PM domain's system
suspend callbacks to allow devices attached to it to be left in the
runtime-suspended state during system suspend so as to optimize
the suspend process.

This was based on the general mechanism introduced by commit
aae4518b31 (PM / sleep: Mechanism to avoid resuming runtime-suspended
devices unnecessarily).

Extend that approach to PCI devices by modifying the PCI bus type's
->prepare callback to return 1 for devices that are runtime-suspended
when it is being executed and that are in a suitable power state and
need not be resumed going forward.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2015-01-23 22:13:54 +01:00
Yinghai Lu
0f7e7aee2f PCI: Add pci_bus_clip_resource() to clip to fit upstream window
Add pci_bus_clip_resource().  If a PCI-PCI bridge window overlaps an
upstream bridge window but is not completely contained by it, this clips
the downstream window so it fits inside the upstream one.

No functional change (this adds the function but no callers).

[bhelgaas: changelog, split into separate patch]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491
Reported-by: Marek Kordik <kordikmarek@gmail.com>
Fixes: 5b28541552 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.16+
2015-01-16 10:04:42 -06:00
Linus Torvalds
c75059c462 PCI changes for the v3.19 merge window:
NUMA
     - Allow numa_node override via sysfs (Prarit Bhargava)
 
   Resource management
     - Restore detection of read-only BARs (Myron Stowe)
     - Shrink decoding-disabled window while sizing BARs (Myron Stowe)
     - Add informational printk for invalid BARs (Myron Stowe)
     - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe)
 
   MSI
     - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang)
     - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang)
     - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang)
 
   Virtualization
     - xen: Process failure for pcifront_(re)scan_root() (Chen Gang)
     - Make FLR and AF FLR reset warning messages different (Gavin Shan)
 
   Generic host bridge driver
     - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi)
     - Convert to DT resource parsing API (Lorenzo Pieralisi)
 
   Freescale Layerscape
     - Add Freescale Layerscape PCIe driver (Minghuan Lian)
 
   NVIDIA Tegra
     - Do not build on 64-bit ARM (Thierry Reding)
     - Add Kconfig help text (Thierry Reding)
 
   Renesas R-Car
     - Make rcar_pci static (Jingoo Han)
 
   Samsung Exynos
     - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han)
 
   ST Microelectronics SPEAr13xx
     - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han)
     - Make spear13xx_add_pcie_port() __init (Jingoo Han)
     - Remove unnecessary OOM message (Jingoo Han)
 
   TI DRA7xx
     - Add dra7xx prefix to add_pcie_port() (Jingoo Han)
     - Make dra7xx_add_pcie_port() __init (Jingoo Han)
 
   TI Keystone
     - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han)
     - Remove unnecessary OOM message (Jingoo Han)
 
   Miscellaneous
     - Delete unnecessary NULL pointer checks (Markus Elfring)
     - Remove unused to_hotplug_slot() (Gavin Shan)
     - Whitespace cleanup (Jingoo Han)
     - Simplify if-return sequences (Quentin Lambert)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUhik9AAoJEFmIoMA60/r8tAQQAJ3Rv5MlHt63cXxgIMOcoLrR
 OsFvW+2oMTyUkGg69SgI3YfF9IBjdwkJ3U6OnpfPGcbKyQvmSTxwCEZPVYM9r3mC
 1UknItYLXSFsz682sXGrepHoL/N3Im0fhu56oEJwIL+htHNMgGKk+Sk6yW9rBVvz
 J7fw31mlrs5YnjkLvwbDjmS3fpCmjqb5fkNlZHxwKcPtM/ODfbRnYYvSucN9Relt
 xy2MyuXlZvp7aPwi03z7utZx1ezjzfVlGNlCWyVINERvqbKYeIrAGbfwmVdCVRRf
 2kqNS5N6B1IHq6iHg5xbjh9ZOdzYu2bPO4v7qgDEUDWzT0JTes4mOrv5NJWk4ZV/
 0erFLOkaCzHpriAXYN8qSfJilm40EYt+hKQI3f8jaTEOycOTWgOcVh9ci7uaNWgX
 6Ia9Ch+FXbMg3deL+MwfFQFNbkMzgeNihLZW7xf54psWJobQ3v4eG2KTRqCaOqI0
 87tMWPSzOqqnQEUWGw0rTSS7P5UxgKc27Qw83OaaIMz8G3ibSc4VhZT/PpBCQog9
 M6ezsxNhJ6rj/81mM5jElzGHQeHUnsAahcQscvva07q6UcRx7JhWVLW0E6l+gyD+
 u1XWZQi5b3PwVlJRyv3sKgFpFjsH8pu7wBL8F13NHd0eb4M5m3ZUZmBbXktF0dLc
 V0H7kqLWqkTCXo7omekm
 =kKg9
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Here are the PCI changes intended for v3.19.  I don't think there's
  anything very exciting here, but there was a lot of MSI-related stuff
  coming via Thomas.

  Details:

  NUMA
    - Allow numa_node override via sysfs (Prarit Bhargava)

  Resource management
    - Restore detection of read-only BARs (Myron Stowe)
    - Shrink decoding-disabled window while sizing BARs (Myron Stowe)
    - Add informational printk for invalid BARs (Myron Stowe)
    - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe)

  MSI
    - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang)
    - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang)
    - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang)

  Virtualization
    - xen: Process failure for pcifront_(re)scan_root() (Chen Gang)
    - Make FLR and AF FLR reset warning messages different (Gavin Shan)

  Generic host bridge driver
    - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi)
    - Convert to DT resource parsing API (Lorenzo Pieralisi)

  Freescale Layerscape
    - Add Freescale Layerscape PCIe driver (Minghuan Lian)

  NVIDIA Tegra
    - Do not build on 64-bit ARM (Thierry Reding)
    - Add Kconfig help text (Thierry Reding)

  Renesas R-Car
    - Make rcar_pci static (Jingoo Han)

  Samsung Exynos
    - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han)

  ST Microelectronics SPEAr13xx
    - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han)
    - Make spear13xx_add_pcie_port() __init (Jingoo Han)
    - Remove unnecessary OOM message (Jingoo Han)

  TI DRA7xx
    - Add dra7xx prefix to add_pcie_port() (Jingoo Han)
    - Make dra7xx_add_pcie_port() __init (Jingoo Han)

  TI Keystone
    - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han)
    - Remove unnecessary OOM message (Jingoo Han)

  Miscellaneous
    - Delete unnecessary NULL pointer checks (Markus Elfring)
    - Remove unused to_hotplug_slot() (Gavin Shan)
    - Whitespace cleanup (Jingoo Han)
    - Simplify if-return sequences (Quentin Lambert)"

* tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits)
  PCI: Remove fixed parameter in pci_iov_resource_bar()
  PCI: Add informational printk for invalid BARs
  PCI: tegra: Add Kconfig help text
  PCI: tegra: Do not build on 64-bit ARM
  PCI: spear: Remove unnecessary OOM message
  PCI: mvebu: Add a blank line after declarations
  PCI: designware: Add a blank line after declarations
  PCI: exynos: Remove unnecessary return statement
  PCI: imx6: Use tabs for indentation
  PCI: keystone: Remove unnecessary OOM message
  PCI: Remove unused and broken to_hotplug_slot()
  PCI: Make FLR and AF FLR reset warning messages different
  PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port()
  PCI: spear: Add __init annotation to spear13xx_add_pcie_port()
  PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc.
  PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port()
  PCI: layerscape: Add Freescale Layerscape PCIe driver
  PCI: Simplify if-return sequences
  PCI: Delete unnecessary NULL pointer checks
  PCI: Shrink decoding-disabled window while sizing BARs
  ...
2014-12-10 20:58:52 -08:00