POWER8 and newer support a bypass mode which maps all host memory to
PCI buses so an IOMMU table is not always required. However if we fail to
create such a table, the DMA setup fails and the kernel does not boot.
This skips the 32bit DMA setup check if the bypass is selected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-3-aik@ozlabs.ru
pnv_tce() returns a pointer to a TCE entry and originally a TCE table
would be pre-allocated. For the default case of 2GB window the table
needs only a single level and that is fine. However if more levels are
requested, it is possible to get a race when 2 threads want a pointer
to a TCE entry from the same page of TCEs.
This adds cmpxchg to handle the race. Note that once TCE is non-zero,
it cannot become zero again.
Fixes: a68bd1267b ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-2-aik@ozlabs.ru
The calls to arch_add_memory()/arch_remove_memory() are always made
with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin().
On pSeries, arch_add_memory()/arch_remove_memory() eventually call
resize_hpt() which in turn calls stop_machine() which acquires the
read-side cpu_hotplug_lock again, thereby resulting in the recursive
acquisition of this lock.
In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system
lockup during a memory hotplug operation because cpus_read_lock() is a
per-cpu rwsem read, which, in the fast-path (in the absence of the
writer, which in our case is a CPU-hotplug operation) simply
increments the read_count on the semaphore. Thus a recursive read in
the fast-path doesn't cause any problems.
However, we can hit this problem in practice if there is a concurrent
CPU-Hotplug operation in progress which is waiting to acquire the
write-side of the lock. This will cause the second recursive read to
block until the writer finishes. While the writer is blocked since the
first read holds the lock. Thus both the reader as well as the writers
fail to make any progress thereby blocking both CPU-Hotplug as well as
Memory Hotplug operations.
Memory-Hotplug CPU-Hotplug
CPU 0 CPU 1
------ ------
1. down_read(cpu_hotplug_lock.rw_sem)
[memory_hotplug_begin]
2. down_write(cpu_hotplug_lock.rw_sem)
[cpu_up/cpu_down]
3. down_read(cpu_hotplug_lock.rw_sem)
[stop_machine()]
Lockdep complains as follows in these code-paths.
swapper/0/1 is trying to acquire lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60
but task is already holding lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(cpu_hotplug_lock.rw_sem);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by swapper/0/1:
#0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0
#1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
#2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0
stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166
Call Trace:
dump_stack+0xe8/0x164 (unreliable)
__lock_acquire+0x1110/0x1c70
lock_acquire+0x240/0x290
cpus_read_lock+0x64/0xf0
stop_machine+0x2c/0x60
pseries_lpar_resize_hpt+0x19c/0x2c0
resize_hpt_for_hotplug+0x70/0xd0
arch_add_memory+0x58/0xfc
devm_memremap_pages+0x5e8/0x8f0
pmem_attach_disk+0x764/0x830
nvdimm_bus_probe+0x118/0x240
really_probe+0x230/0x4b0
driver_probe_device+0x16c/0x1e0
__driver_attach+0x148/0x1b0
bus_for_each_dev+0x90/0x130
driver_attach+0x34/0x50
bus_add_driver+0x1a8/0x360
driver_register+0x108/0x170
__nd_driver_register+0xd0/0xf0
nd_pmem_driver_init+0x34/0x48
do_one_initcall+0x1e0/0x45c
kernel_init_freeable+0x540/0x64c
kernel_init+0x2c/0x160
ret_from_kernel_thread+0x5c/0x68
Fix this issue by
1) Requiring all the calls to pseries_lpar_resize_hpt() be made
with cpu_hotplug_lock held.
2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked()
as a consequence of 1)
3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt()
with cpu_hotplug_lock held.
Fixes: dbcf929c00 ("powerpc/pseries: Add support for hash table resizing")
Cc: stable@vger.kernel.org # v4.11+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com
Testing has revealed the existence of a race condition where a XIVE
interrupt being shut down can be in one of the XIVE interrupt queues
(of which there are up to 8 per CPU, one for each priority) at the
point where free_irq() is called. If this happens, can return an
interrupt number which has been shut down. This can lead to various
symptoms:
- irq_to_desc(irq) can be NULL. In this case, no end-of-interrupt
function gets called, resulting in the CPU's elevated interrupt
priority (numerically lowered CPPR) never gets reset. That then
means that the CPU stops processing interrupts, causing device
timeouts and other errors in various device drivers.
- The irq descriptor or related data structures can be in the process
of being freed as the interrupt code is using them. This typically
leads to crashes due to bad pointer dereferences.
This race is basically what commit 62e0468650 ("genirq: Add optional
hardware synchronization for shutdown", 2019-06-28) is intended to
fix, given a get_irqchip_state() method for the interrupt controller
being used. It works by polling the interrupt controller when an
interrupt is being freed until the controller says it is not pending.
With XIVE, the PQ bits of the interrupt source indicate the state of
the interrupt source, and in particular the P bit goes from 0 to 1 at
the point where the hardware writes an entry into the interrupt queue
that this interrupt is directed towards. Normally, the code will then
process the interrupt and do an end-of-interrupt (EOI) operation which
will reset PQ to 00 (assuming another interrupt hasn't been generated
in the meantime). However, there are situations where the code resets
P even though a queue entry exists (for example, by setting PQ to 01,
which disables the interrupt source), and also situations where the
code leaves P at 1 after removing the queue entry (for example, this
is done for escalation interrupts so they cannot fire again until
they are explicitly re-enabled).
The code already has a 'saved_p' flag for the interrupt source which
indicates that a queue entry exists, although it isn't maintained
consistently. This patch adds a 'stale_p' flag to indicate that
P has been left at 1 after processing a queue entry, and adds code
to set and clear saved_p and stale_p as necessary to maintain a
consistent indication of whether a queue entry may or may not exist.
With this, we can implement xive_get_irqchip_state() by looking at
stale_p, saved_p and the ESB PQ bits for the interrupt.
There is some additional code to handle escalation interrupts
properly; because they are enabled and disabled in KVM assembly code,
which does not have access to the xive_irq_data struct for the
escalation interrupt. Hence, stale_p may be incorrect when the
escalation interrupt is freed in kvmppc_xive_{,native_}cleanup_vcpu().
Fortunately, we can fix it up by looking at vcpu->arch.xive_esc_on,
with some careful attention to barriers in order to ensure the correct
result if xive_esc_irq() races with kvmppc_xive_cleanup_vcpu().
Finally, this adds code to make noise on the console (pr_crit and
WARN_ON(1)) if we find an interrupt queue entry for an interrupt
which does not have a descriptor. While this won't catch the race
reliably, if it does get triggered it will be an indication that
the race is occurring and needs to be debugged.
Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100648.GE9567@blackberry
At present, when running a guest on POWER9 using HV KVM but not using
an in-kernel interrupt controller (XICS or XIVE), for example if QEMU
is run with the kernel_irqchip=off option, the guest entry code goes
ahead and tries to load the guest context into the XIVE hardware, even
though no context has been set up.
To fix this, we check that the "CAM word" is non-zero before pushing
it to the hardware. The CAM word is initialized to a non-zero value
in kvmppc_xive_connect_vcpu() and kvmppc_xive_native_connect_vcpu(),
and is now cleared in kvmppc_xive_{,native_}cleanup_vcpu.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100100.GC9567@blackberry
Escalation interrupts are interrupts sent to the host by the XIVE
hardware when it has an interrupt to deliver to a guest VCPU but that
VCPU is not running anywhere in the system. Hence we disable the
escalation interrupt for the VCPU being run when we enter the guest
and re-enable it when the guest does an H_CEDE hypercall indicating
it is idle.
It is possible that an escalation interrupt gets generated just as we
are entering the guest. In that case the escalation interrupt may be
using a queue entry in one of the interrupt queues, and that queue
entry may not have been processed when the guest exits with an H_CEDE.
The existing entry code detects this situation and does not clear the
vcpu->arch.xive_esc_on flag as an indication that there is a pending
queue entry (if the queue entry gets processed, xive_esc_irq() will
clear the flag). There is a comment in the code saying that if the
flag is still set on H_CEDE, we have to abort the cede rather than
re-enabling the escalation interrupt, lest we end up with two
occurrences of the escalation interrupt in the interrupt queue.
However, the exit code doesn't do that; it aborts the cede in the sense
that vcpu->arch.ceded gets cleared, but it still enables the escalation
interrupt by setting the source's PQ bits to 00. Instead we need to
set the PQ bits to 10, indicating that an interrupt has been triggered.
We also need to avoid setting vcpu->arch.xive_esc_on in this case
(i.e. vcpu->arch.xive_esc_on seen to be set on H_CEDE) because
xive_esc_irq() will run at some point and clear it, and if we race with
that we may end up with an incorrect result (i.e. xive_esc_on set when
the escalation interrupt has just been handled).
It is extremely unlikely that having two queue entries would cause
observable problems; theoretically it could cause queue overflow, but
the CPU would have to have thousands of interrupts targetted to it for
that to be possible. However, this fix will also make it possible to
determine accurately whether there is an unhandled escalation
interrupt in the queue, which will be needed by the following patch.
Fixes: 9b9b13a6d1 ("KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless ceded")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100349.GD9567@blackberry
When a vCPU is brought done, the XIVE VP (Virtual Processor) is first
disabled and then the event notification queues are freed. When freeing
the queues, we check for possible escalation interrupts and free them
also.
But when a XIVE VP is disabled, the underlying XIVE ENDs also are
disabled in OPAL. When an END (Event Notification Descriptor) is
disabled, its ESB pages (ESn and ESe) are disabled and loads return all
1s. Which means that any access on the ESB page of the escalation
interrupt will return invalid values.
When an interrupt is freed, the shutdown handler computes a 'saved_p'
field from the value returned by a load in xive_do_source_set_mask().
This value is incorrect for escalation interrupts for the reason
described above.
This has no impact on Linux/KVM today because we don't make use of it
but we will introduce in future changes a xive_get_irqchip_state()
handler. This handler will use the 'saved_p' field to return the state
of an interrupt and 'saved_p' being incorrect, softlockup will occur.
Fix the vCPU cleanup sequence by first freeing the escalation interrupts
if any, then disable the XIVE VP and last free the queues.
Fixes: 90c73795af ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode")
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org
There is no need to use GFP_ATOMIC here. GFP_KERNEL should be enough.
GFP_KERNEL is also already used for another allocation just a few lines
below.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/85d5d247ce753befd6aa63c473f7823de6520ccd.1564647619.git.christophe.jaillet@wanadoo.fr
Commit ebb9d30a6a ("powerpc/mm: any thread in one core can be the
first to setup TLB1") removed the need to know the cpu_id in
early_init_this_mmu(), but the call to smp_processor_id() which was
marked __maybe_used remained.
Since commit ed1cd6deb0 ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK")
thread_info cannot be reached before MMU is properly set up.
Drop this stale call to smp_processor_id() which makes SMP hang when
CONFIG_PREEMPT is set.
Fixes: ebb9d30a6a ("powerpc/mm: any thread in one core can be the first to setup TLB1")
Fixes: ed1cd6deb0 ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK")
Cc: stable@vger.kernel.org # v5.1+
Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bef479514f4c08329fa649f67735df8918bc0976.1565268248.git.christophe.leroy@c-s.fr
I noticed these nested ifs can be easily replaced by switch-cases,
which can improve readability.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190801225251.17864-1-leonardo@linux.ibm.com
The comment above xive_esb_read() references magic loads from an ESB as
described xive.h. This has been inaccurate since commit 12c1f339cd
("powerpc/xive: Move definition of ESB bits") which moved the
description. Update the comment to reference the new location of the
description in xive-regs.h
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802000835.26191-1-jniethe5@gmail.com
Currently the OPAL symbol map is globally readable, which seems bad as
it contains physical addresses.
Restrict it to root.
Fixes: c8742f8512 ("powerpc/powernv: Expose OPAL firmware symbol map")
Cc: stable@vger.kernel.org # v3.19+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com
SCOM_DEBUGFS is really not needed for anything other than low-level
hardware debugging.
mpe: It also introduces a large and poorly documented/understood
attack surface. Although the interface is only available to root, the
kernel still aspires to restrict root to accessing hardware through
well defined interfaces, which this is not.
opal-prd uses its own interface (/dev/prd) for SCOM access, so it
doesn't need SCOM_DEBUGFS.
At some point in the future we'll introduce a debug config fragment
where this can go instead.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-5-ajd@linux.ibm.com
Once upon a time, the SCOM access code was used by the WSP platform as
well as powernv. Thus it made sense to have a generic SCOM access
interface to abstract between different platforms.
Now that it's just powernv, with no other platforms currently on the
horizon, let's rip out scom_controller and make everything much
simpler and more direct.
While we're here, fix up the comment block at the top.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-3-ajd@linux.ibm.com
Nothing is using scom_map_device() or scom_find_parent(). Remove them.
Also don't export scom_controller, there are no other users of it.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-2-ajd@linux.ibm.com
The powernv platform is the only one that directly accesses SCOMs.
Move the support code to platforms/powernv, and get rid of the
PPC_SCOM Kconfig option, as SCOM support is always selected when
compiling for powernv.
This also means that the Kconfig item for CONFIG_SCOM_DEBUGFS will
show up in menuconfig in the platform menu, rather than at the root,
which is a much better location.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190509051119.7694-1-ajd@linux.ibm.com
When building with -Wsometimes-uninitialized, clang warns:
drivers/pci/hotplug/rpaphp_core.c:243:14: warning: variable 'fndit' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
for (j = 0; j < entries; j++) {
^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:256:6: note: uninitialized use occurs
here
if (fndit)
^~~~~
drivers/pci/hotplug/rpaphp_core.c:243:14: note: remove the condition if
it is always true
for (j = 0; j < entries; j++) {
^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:233:14: note: initialize the variable
'fndit' to silence this warning
int j, fndit;
^
= 0
fndit is only used to gate a sprintf call, which can be moved into the
loop to simplify the code and eliminate the local variable, which will
fix this warning.
Fixes: 2fcf3ae508 ("hotplug/drc-info: Add code to search ibm,drc-info property")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/504
Link: https://lore.kernel.org/r/20190603221157.58502-1-natechancellor@gmail.com
These aren't used by modular code, nor should they be.
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718162214.5694-1-nathanl@linux.ibm.com
This reverts commit 6c5875843b.
It triggers a probable compiler bug on clang which leads to crashes.
With GCC it allows the compiler to use a more efficient register
allocation but current GCC versions never do that at any of the current
call sites, so there's no benefit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: powerpc):
drivers/macintosh/smu.c: In function 'smu_queue_i2c':
drivers/macintosh/smu.c:854:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
cmd->info.devaddr &= 0xfe;
~~~~~~~~~~~~~~~~~~^~~~~~~
drivers/macintosh/smu.c:855:2: note: here
case SMU_I2C_TRANSFER_STDSUB:
^~~~
Fixes: 0365ba7fb1 ("[PATCH] ppc64: SMU driver update & i2c support")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190730143704.060a2606@canb.auug.org.au
Mark switch cases where we are expecting to fall through.
Fixes errors such as below, seen with mpc85xx_defconfig:
arch/powerpc/kernel/align.c: In function 'emulate_spe':
arch/powerpc/kernel/align.c:178:8: error: this statement may fall through
ret |= __get_user_inatomic(temp.v[3], p++);
^~
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au
Currently, nvdimm subsystem expects the device numa node for SCM device to be
an online node. It also doesn't try to bring the device numa node online. Hence
if we use a non-online numa node as device node we hit crashes like below. This
is because we try to access uninitialized NODE_DATA in different code paths.
cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170]
pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0
lr: c0000000004bc834: __slab_alloc+0x64/0xc0
sp: c0000000fac53400
msr: 8000000002009033
dar: 73e8
dsisr: 80000
current = 0xc0000000fabb6d80
paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01
pid = 7, comm = kworker/u16:0
Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #135 SMP Thu Jul 11 05:36:30 CDT 2019
enter ? for help
[link register ] c0000000004bc834 __slab_alloc+0x64/0xc0
[c0000000fac53400] c0000000fac53480 (unreliable)
[c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0
[c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0
[c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0
[c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560
[c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370
[c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230
[c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0
[c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0
[c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130
[c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200
[c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0
[c0000000fac53a90] c000000000ced268 device_add+0x528/0x810
[c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0
[c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0
[c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860
[c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0
[c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0
[c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68
The patch tries to fix this by picking the nearest online node as the SCM node.
This does have a problem of us losing the information that SCM node is
equidistant from two other online nodes. If applications need to understand these
fine-grained details we should express then like x86 does via
/sys/devices/system/node/nodeX/accessY/initiators/
With the patch we get
# numactl -H
available: 2 nodes (0-1)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 130865 MB
node 1 free: 129130 MB
node distances:
node 0 1
0: 10 20
1: 20 10
# cat /sys/bus/nd/devices/region0/numa_node
0
# dmesg | grep papr_scm
[ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com
Implicit fallthrough warning was enabled globally which broke
the build. Make it explicit with a `fall through` comment.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190729055536.25591-1-santosh@fossix.org
Wire up the new clone3 syscall added in commit 7f192e3cd3 ("fork:
add clone3").
This requires a ppc_clone3 wrapper, in order to save the non-volatile
GPRs before calling into the generic syscall code. Otherwise we hit
the BUG_ON in CHECK_FULL_REGS in copy_thread().
Lightly tested using Christian's test code on a Power8 LE VM.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian Brauner <christian@brauner.io>
Link: https://lore.kernel.org/r/20190724140259.23554-1-mpe@ellerman.id.au
- Disable gcc-based stack variable auto-init under KASAN (Arnd Bergmann)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=z0XP
-----END PGP SIGNATURE-----
Merge tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull structleak fix from Kees Cook:
"Disable gcc-based stack variable auto-init under KASAN (Arnd
Bergmann).
This fixes a bunch of build warnings under KASAN and the
gcc-plugin-based stack auto-initialization features (which are
arguably redundant, so better to let KASAN control this)"
* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
Here are some small char and misc driver fixes for 5.3-rc2 to resolve
some reported issues.
Nothing major at all, some binder bugfixes for issues found, some new
mei device ids, firmware building warning fixes, habanalabs fixes, a few
other build fixes, and a MAINTAINERS update.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2L1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynVaQCfbYmj0QWJhL5rVvrUOcdXppa3qxgAn1Pi5+hf
V3OH/1OmAnY8E07HA1Y3
=qVrq
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.3-rc2 to resolve
some reported issues.
Nothing major at all, some binder bugfixes for issues found, some new
mei device ids, firmware building warning fixes, habanalabs fixes, a
few other build fixes, and a MAINTAINERS update.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
test_firmware: fix a memory leak bug
hpet: Fix division by zero in hpet_time_div()
eeprom: make older eeprom drivers select NVMEM_SYSFS
vmw_balloon: Remove Julien from the maintainers list
fpga-manager: altera-ps-spi: Fix build error
mei: me: add mule creek canyon (EHL) device ids
binder: prevent transactions to context manager from its own process.
binder: Set end of SG buffer area properly.
firmware: Fix missing inline
firmware: fix build errors in paged buffer handling code
habanalabs: don't reset device when getting VRHOT
habanalabs: use %pad for printing a dma_addr_t
Here are 2 tty/vt patches for 5.3-rc2
- delete the netx-serial driver as the arch has been removed, no need
to keep the serial driver for it around either.
- vt console_lock fix to resolve a reported noisy warning at runtime
Both of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2MbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk0iACeOnBnhE1OKqIVsG11K619UtLb67sAoL9h6Rgk
3PWLkB02N1ApgevMEOs5
=V3Xf
-----END PGP SIGNATURE-----
Merge tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty/vt fixes:
- delete the netx-serial driver as the arch has been removed, no need
to keep the serial driver for it around either.
- vt console_lock fix to resolve a reported noisy warning at runtime
Both of these have been in linux-next with no reported issues"
* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: Grab console_lock around con_is_bound in show_bind
tty: serial: netx: Delete driver
Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only 3 small patches here:
- 2 uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2N9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylY9wCeJIYfs/eNf3tsjLQXxUBMYAJNqnsAn2IaMiTt
cv2mck7JZm5KyHpP3f5N
=RSZa
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only three small patches here:
- two uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists"
* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
iomap: fix Invalid License ID
treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
Here are some small fixes for 5.3-rc2. All of these resolve some
reported issues, some more than others :)
Included in here is:
- xhci fix for an annoying issue with odd devices
- reversion of some usb251xb patches that should not have been
merged
- usb pci quirk additions and fixups
- usb storage fix
- usb host controller error test fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2NGQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymsIACgjIehIXyxGQXJb2PzAyt5Omx6ZmoAnjfCZI8p
zzsg1mZSdDsie3gILfQc
=nzbN
-----END PGP SIGNATURE-----
Merge tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for 5.3-rc2. All of these resolve some
reported issues, some more than others :)
Included in here is:
- xhci fix for an annoying issue with odd devices
- reversion of some usb251xb patches that should not have been merged
- usb pci quirk additions and fixups
- usb storage fix
- usb host controller error test fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
Revert "usb: usb251xb: Add US port lanes inversion property"
Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
usb: wusbcore: fix unbalanced get/put cluster_id
usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
usb-storage: Add a limitation for blk_queue_max_hw_sectors()
usb: pci-quirks: Minor cleanup for AMD PLL quirk
usb: pci-quirks: Correct AMD PLL quirk detection
Here's the first batch of fixes for this release cycle.
Main diffstat here is the re-deletion of netx. I messed up and most
likely didn't remove the files from the index when I test-merged this
and saw conflicts, and from there on out 'git rerere' remembered the
mistake and I missed checking it. Here it's done again as expected.
Besides that:
- A defconfig refresh + enabling of new drivers for u8500
- i.MX fixlets for i2c/SAI/pinmux
- sleep.S build fix for Davinci
- Broadcom devicetree build/warning fix
-----BEGIN PGP SIGNATURE-----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=IReR
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"Here's the first batch of fixes for this release cycle.
Main diffstat here is the re-deletion of netx. I messed up and most
likely didn't remove the files from the index when I test-merged this
and saw conflicts, and from there on out 'git rerere' remembered the
mistake and I missed checking it. Here it's done again as expected.
Besides that:
- A defconfig refresh + enabling of new drivers for u8500
- i.MX fixlets for i2c/SAI/pinmux
- sleep.S build fix for Davinci
- Broadcom devicetree build/warning fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: defconfig: u8500: Add new drivers
ARM: defconfig: u8500: Refresh defconfig
ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
ARM: davinci: fix sleep.S build error on ARMv4
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: Delete netx a second time
ARM: dts: imx7ulp: Fix usb-phy unit address format
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and functional updates:
- Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
which got exposed by KPTI support for 32bit
- Prevent bogus access_ok() warnings in arch_stack_walk_user()
- Add display quirks for Lenovo devices which have height and width
swapped
- Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
the CR2 bug fix series.
- Unbreak handling of force enabled HPET by moving the 'is HPET
counting' check back to the original place.
- A more accurate check for running on a hypervisor platform in the
MDS mitigation code. Not perfect, but more accurate than the
previous one.
- Update a stale and confusing comment vs. IRQ stacks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mds: Apply more accurate check on hypervisor platform
x86/hpet: Undo the early counter is counting check
x86/entry/32: Pass cr2 to do_async_page_fault()
x86/irq/64: Update stale comment
x86/sysfb_efi: Add quirks for some devices with swapped width and height
x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
x86/mm: Sync also unmappings in vmalloc_sync_all()
x86/mm: Check for pfn instead of page in vmalloc_sync_one()
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for the fair scheduling class:
- Prevent freeing memory which is accessible by concurrent readers
- Make the RCU annotations for numa groups consistent"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use RCU accessors consistently for ->numa_group
sched/fair: Don't free p->numa_faults with concurrent readers
Pull perf fixes from Thomas Gleixner:
"A pile of perf related fixes:
Kernel:
- Fix SLOTS PEBS event constraints for Icelake CPUs
- Add the missing mask bit to allow counting hardware generated
prefetches on L3 for Icelake CPUs
- Make the test for hypervisor platforms more accurate (as far as
possible)
- Handle PMUs correctly which override event->cpu
- Yet another missing fallthrough annotation
Tools:
perf.data:
- Fix loading of compressed data split across adjacent records
- Fix buffer size setting for processing CPU topology perf.data
header.
perf stat:
- Fix segfault for event group in repeat mode
- Always separate "stalled cycles per insn" line, it was being
appended to the "instructions" line.
perf script:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Mark expected switch fall-throughs
perf/core: Fix creating kernel counters for PMUs that override event->cpu
perf/x86: Apply more accurate check on hypervisor platform
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
perf/x86/intel: Fix SLOTS PEBS event constraint
perf build: Do not use -Wshadow on gcc < 4.8
perf probe: Avoid calling freeing routine multiple times for same pointer
perf probe: Set pev->nargs to zero after freeing pev->args entries
perf session: Fix loading of compressed data split across adjacent records
perf stat: Always separate stalled cycles per insn
perf stat: Fix segfault for event group in repeat mode
perf tools: Fix proper buffer size for feature processing
perf script: Fix off by one in brstackinsn IPC computation
perf script: Improve man page description of metrics
perf script: Fix --max-blocks man page description
Pull locking fixes from Thomas Gleixner:
"A set of locking fixes:
- Address the fallout of the rwsem rework. Missing ACQUIREs and a
sanity check to prevent a use-after-free
- Add missing checks for unitialized mutexes when mutex debugging is
enabled.
- Remove the bogus code in the generic SMP variant of
arch_futex_atomic_op_inuser()
- Fixup the #ifdeffery in lockdep to prevent compile warnings"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: Test for initialized mutex
locking/lockdep: Clean up #ifdef checks
locking/lockdep: Hide unused 'class' variable
locking/rwsem: Add ACQUIRE comments
tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
locking/rwsem: Don't call owner_on_cpu() on read-owner
futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()
Pull objtool fix from Thomas Gleixner:
"A single robustness fix for objtool to handle unbalanced CLAC
invocations under all circumstances"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Improve UACCESS coverage
Hi Linus,
Please, pull the following patches that mark switch cases where we are
expecting to fall through. These patches are part of the ongoing efforts
to enable -Wimplicit-fallthrough. Most of them have been baking in linux-next
for a whole development cycle.
Also, pull the Makefile patch that globally enables the
-Wimplicit-fallthrough option.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
Notice that with these changes, we completely get rid of all the
fall-through warnings in the kernel.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----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=J2sO
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
"This marks switch cases where we are expecting to fall through, and
globally enables the -Wimplicit-fallthrough option in the main
Makefile.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
With these changes, we completely get rid of all the fall-through
warnings in the kernel"
* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Globally enable fall-through warning
drm/i915: Mark expected switch fall-throughs
drm/amd/display: Mark expected switch fall-throughs
drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
drm/amdgpu/gfx10: Fix missing break in switch statement
drm/amdkfd: Fix missing break in switch statement
perf/x86/intel: Mark expected switch fall-throughs
mtd: onenand_base: Mark expected switch fall-through
afs: fsclient: Mark expected switch fall-throughs
afs: yfsclient: Mark expected switch fall-throughs
can: mark expected switch fall-throughs
firewire: mark expected switch fall-throughs
- Add ABI to kernel image file which allows e.g. the file utility to figure
out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly defined
with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=J+rB
-----END PGP SIGNATURE-----
Merge tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add ABI to kernel image file which allows e.g. the file utility to
figure out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
defined with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: vfio-ccw: Remove myself as the maintainer
s390/mm: use shared variables for sysctl range check
virtio/s390: fix race on airq_areas[]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
s390/kasan: add bitops instrumentation
s390/bitops: make test functions return bool
s390: wire up clone3 system call
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
s390/hypfs: fix a typo in the name of a function
s390/qdio: restrict QAOB usage to IQD unicast queues
s390/qdio: add sanity checks to the fast-requeue path
s390: enable detection of kernel version from bzImage
Documentation: fix vfio-ccw doc
vfio-ccw: Update documentation for csch/hsch
vfio-ccw: Don't call cp_free if we are processing a channel program
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
vfio-ccw: Fix memory leak and don't call cp_free in cp_init
vfio-ccw: Fix misleading comment when setting orb.cmd.c64
- Fix mismatches in $id values and actual filenames. Now checked by
tools.
- Convert nvmem binding to DT schema
- Fix a typo in of_property_read_bool() kerneldoc
- Remove some redundant description in al-fic interrupt-controller
-----BEGIN PGP SIGNATURE-----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=ozkP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"The nvmem changes would typically go thru Greg's tree, but they were
missed in the merge window. [ Acked by Greg ]
Summary:
- Fix mismatches in $id values and actual filenames. Now checked by
tools.
- Convert nvmem binding to DT schema
- Fix a typo in of_property_read_bool() kerneldoc
- Remove some redundant description in al-fic interrupt-controller"
* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Fix more $id value mismatches filenames
dt-bindings: nvmem: SID: Fix the examples node names
dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
of: Fix typo in kerneldoc
dt-bindings: interrupt-controller: al-fic: remove redundant binding
dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id
- Fix duplicate device_unregister() calls (multiple threads competing to
do unregister work when scheduling device removal from a sysfs attribute
of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations via
the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep.
-----BEGIN PGP SIGNATURE-----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=mhIp
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A collection of locking and async operations fixes for v5.3-rc2. These
had been soaking in a branch targeting the merge window, but missed
due to a regression hunt. This fixed up version has otherwise been in
-next this past week with no reported issues.
In order to gain confidence in the locking changes the pull also
includes a debug / instrumentation patch to enable lockdep coverage
for libnvdimm subsystem operations that depend on the device_lock for
exclusion. As mentioned in the changelog it is a hack, but it works
and documents the locking expectations of the sub-system in a way that
others can use lockdep to verify. The driver core touches got an ack
from Greg.
Summary:
- Fix duplicate device_unregister() calls (multiple threads competing
to do unregister work when scheduling device removal from a sysfs
attribute of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations
via the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep"
* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
driver-core, libnvdimm: Let device subsystems add local lockdep coverage
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
libnvdimm/region: Register badblocks before namespaces
libnvdimm/bus: Prevent duplicate device_unregister() calls
drivers/base: Introduce kill_device()
This is unused since commit 9f69a496f1 ("kbuild: split out *.mod out
of {single,multi}-used-m rules").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Running gen_compile_commands.py after building the kernel with
allnoconfig gave this:
$ ./scripts/gen_compile_commands.py
WARNING: Found 449 entries. Have you compiled the kernel?
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
