Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.
-----BEGIN PGP SIGNATURE-----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=YrwI
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED device tree updates for 5.3
Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.
* tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: multi_v5: Add more ASPEED devices
ARM: configs: aspeed: Add new drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables support for STMFX pinctrl.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Remove GENERIC_PHY from shmobile_defconfig as it is now selected
-----BEGIN PGP SIGNATURE-----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=UHQN
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.3
* Remove GENERIC_PHY from shmobile_defconfig as it is now selected
* tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove GENERIC_PHY from shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for USB networking
* Add support for display related options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hq9W
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.3
* Add support for USB networking
* Add support for display related options
* tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add support for USB networking
ARM: qcom_defconfig: add display-related options
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
Meerkat96 board, and NXP LS1021A-TSN board.
- A series from Andrey Smirnov to update vf610-zii-dev and
imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
adding QSPI device, and dropping unused pinmux.
- Update imx6sl and imx6qdl device tree to assign corresponding clocks
instead of dummy clock.
- Update i.MX6/7 boards from NXP to assign corresponding power supply
for LDOs.
- Update i.MX6/7 device trees to enable SNVS poweroff key support
according to board design.
- Update coresight DT binding for i.MX7 according to consolidations
for CoreSight replicator and funnel.
- A series from Marek Vasut to update M53Menlo board on various devices
like UART, USB, ethernet PHY, GPIOs etc.
- Enable USBOTG support for imx7ulp and evk board.
- A series from Peter Robinson to update imx6sx-udoo board, switching
to SPDX License Identifier, enabling I2C devices and bluetooth
support.
- Add video capture support for i.MX53 and imx53-smd board.
- Add PXP device for i.MX6UL.
- Other random small updates on various boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEbs9AAoJEFBXWFqHsHzOkIoIAKBS9jB7Lp6DSGpYIgwdjBmK
PY0ogud8FZEfHFdDi9WGt3d1KFkr0xBJPvJ1Tn48BdpN/k3TMrFs1sj/PRNlIRe5
llnBpCD5oV7SHAdIkFcGIQeWwHMfnpxe1NdhMiCpT6pKtk2oieRWVs0RvdZ5UgRI
aULSFbxs/ZEjvVa3Jcx7KjFmceCHP8naICtYm7ZYjn3vDI7y1ZosaD9pWFSL3N/k
l/F3B05Zh6HA4HpldGxCbxSVr94GE9HgLXGigo/nEGjiHmhecc2rievsegJP9AKa
z1bTtIK+qrsYmUtXWGPgNTXLpVfjRf+0Q6z60uVDhsfuNJx2IVJkyBeAebXCSMk=
=pBgY
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 DT changes for 5.3:
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
Meerkat96 board, and NXP LS1021A-TSN board.
- A series from Andrey Smirnov to update vf610-zii-dev and
imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
adding QSPI device, and dropping unused pinmux.
- Update imx6sl and imx6qdl device tree to assign corresponding clocks
instead of dummy clock.
- Update i.MX6/7 boards from NXP to assign corresponding power supply
for LDOs.
- Update i.MX6/7 device trees to enable SNVS poweroff key support
according to board design.
- Update coresight DT binding for i.MX7 according to consolidations
for CoreSight replicator and funnel.
- A series from Marek Vasut to update M53Menlo board on various devices
like UART, USB, ethernet PHY, GPIOs etc.
- Enable USBOTG support for imx7ulp and evk board.
- A series from Peter Robinson to update imx6sx-udoo board, switching
to SPDX License Identifier, enabling I2C devices and bluetooth
support.
- Add video capture support for i.MX53 and imx53-smd board.
- Add PXP device for i.MX6UL.
- Other random small updates on various boards.
* tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits)
ARM: dts: imx7ulp-evk: enable USBOTG1 support
ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
ARM: dts: Add support for 96Boards Meerkat96 board
ARM: dts: imx6ul: Add PXP node
ARM: dts: imx6sll: Enable SNVS poweroff according to board design
ARM: dts: imx7s: Enable SNVS power key according to board design
ARM: dts: imx6sll: Enable SNVS power key according to board design
ARM: dts: imx6ul: Enable SNVS power key according to board design
ARM: dts: imx6sx: Enable SNVS power key according to board design
ARM: dts: imx6qdl: Enable SNVS power key according to board design
ARM: dts: imx53: Bind CPLD on M53Menlo
ARM: dts: Introduce the NXP LS1021A-TSN board
ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
ARM: dts: imx7d: Update cpufreq OPP table
ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
MPU part:
-Add stm32mp157a-avenger board support:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
, 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
10/100/1000, WiFi 5 GHz & 2.4GHz, ...
-Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
it.
-Add I2S and SAI support on stm32mp157c.
-Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
(EV1 and DK2 inherit of it).
-Add camera support:
-Add DCMI support on stm32mp157c SOC
-Enabled OV5640 camera support on stm32mp157c-ev1 board
-Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
board.
MCU part:
-Add STMFX support en stm32746g-eval and enable connections on it:
leds and joystick
-----BEGIN PGP SIGNATURE-----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=3ZUA
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.3, round 1
Highlights:
----------
MPU part:
-Add stm32mp157a-avenger board support:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
, 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
10/100/1000, WiFi 5 GHz & 2.4GHz, ...
-Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
it.
-Add I2S and SAI support on stm32mp157c.
-Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
(EV1 and DK2 inherit of it).
-Add camera support:
-Add DCMI support on stm32mp157c SOC
-Enabled OV5640 camera support on stm32mp157c-ev1 board
-Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
board.
MCU part:
-Add STMFX support en stm32746g-eval and enable connections on it:
leds and joystick
* tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits)
ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards
ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A
dt-bindings: arm: stm32: Document Avenger96 devicetree binding
dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157
ARM: dts: stm32: add sai id registers to stm32mp157c
ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1
ARM: dts: stm32: enable display on stm32mp157c-dk1 board
ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1
ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
ARM: dts: stm32: add DCMI pins to stm32mp157c
ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board
ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
ARM: dts: stm32: Add Vivante GPU support on STM32MP157c
ARM: dts: stm32: add i2s pins muxing on stm32mp157
ARM: dts: stm32: add i2s support on stm32mp157c
ARM: dts: stm32: add sai pins muxing on stm32mp157
ARM: dts: stm32: add sai support on stm32mp157c
ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Add LCD support on Netgear RN104
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQyyfAAKCRALBhiOFHI7
1ZPaAJ9AaFGTVnIuqe8EjZLOiKdO03oWMgCgm8Eu0d9566U2ibYCHCbHN0FbUpU=
=F0cP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt for 5.3 (part 1)
Add LCD support on Netgear RN104
* tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts.
Signed-off-by: Olof Johansson <olof@lixom.net>
arm and arm64, a fix for the array syntax raised by our DT schemas.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
=4UQl
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.
* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array
Signed-off-by: Olof Johansson <olof@lixom.net>
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQTgAKCRDj7w1vZxhR
xYkmAQDT7s1MRH9OEFQpS80BcWCvQoj0drr1ghHdXwwEbfuBUgEAoIuLrfH1Vjyi
ZcEJwPGowLmSEZezVWSLqTL76iajJg4=
=PAul
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches:
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
dt-bindings: pwm: Convert Allwinner PWM to a schema
ARM: dts: sun8i: r40: Change the RTC compatible
ARM: dts: sun8i: v3s: Add external crystals accuracy
ARM: dts: sun8i: v3s: Fix the RTC node
ARM: dts: sun6i: Add external crystals accuracy
ARM: dts: sun6i: Fix RTC node
ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
ARM: dts: gr8-evb: Fix RTC vendor
ARM: dts: sun7i: icnova-swac: Fix the model vendor
ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
ARM: dts: sun6i: Add default address and size cells for SPI
ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
dt-bindings: bus: Convert Allwinner RSB to a schema
ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
...
Signed-off-by: Olof Johansson <olof@lixom.net>
We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.
There are some AST2500 machines under development:
* Lenovo Hr630
* IBM Swift
* Facebook YAMP
And some AST2400 machines that have been around but out of tree and have
now joined the party:
* YADRO VESNIN
* Microsoft Olympus
-----BEGIN PGP SIGNATURE-----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=Hwcm
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.3
We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.
There are some AST2500 machines under development:
* Lenovo Hr630
* IBM Swift
* Facebook YAMP
And some AST2400 machines that have been around but out of tree and have
now joined the party:
* YADRO VESNIN
* Microsoft Olympus
* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
ARM: dts: aspeed: Add YADRO VESNIN BMC
ARM: dts: aspeed: Add Microsoft Olympus BMC
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
ARM: dts: aspeed: Add Facebook YAMP BMC
ARM: dts: aspeed: swift: Add pca9539 devices
ARM: dts: aspeed: Add Swift BMC machine
ARM: dts: aspeed: cmm: enable ehci host controllers
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
ARM: dts: aspeed: quanta-q71: Enable p2a node
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
ARM: dts: aspeed: Rename flash-controller nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q1ev
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm Device Tree Changes for v5.3
* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064
* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-hammerhead: add support for display
ARM: dts: msm8974: add display support
ARM: dts: qcom: msm8974-hammerhead: add support for backlight
ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
ARM: dts: qcom-msm8974: Update coresight DT bindings
ARM: dts: qcom-apq8064: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
- Updated CoreSight funnel and replicator using new bindings to fix warning
for the hip04.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vaAE
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs updates for v5.3
- Updated CoreSight funnel and replicator using new bindings to fix warning
for the hip04.
* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hip04: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
- A recent testing by Sébastien discovers that the PWM interrupts of
i.MX6UL were wrongly coded in device tree. It's a fix for it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEXKFAAoJEFBXWFqHsHzOnh4H/RVNWE/NwhLlcqXHnRq4TPpi
CdKQ9ZdXYWfi7SkFQJK8bYefklxfY7JUg4Pa/igTbkyeuwpHQugkYRK7is/jsEcd
TZSCllyvbn4QIOCZJiRsWd3/soEryjaQmZcHTVRLTJXZKhTPB89MuTX7j1BmGd22
SiSCTRtgVRWOY0ORF9oMtjNq1BiHEtf8M7GwvkifhlZCUh3pyqI7sqg+Zer/CEmM
TCOpDc42x56igw36/H/TMKyRQestYNlp8AKxg1cagwNrrLNE4D3Icm5UHdd44KuT
cS5O68BQxUldhfgdejfIZUvVguVlYQkuEZbCW/l18GdiK9IECW/xZRliBqO8RSw=
=Gn7a
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.2, round 3:
- A recent testing by Sébastien discovers that the PWM interrupts of
i.MX6UL were wrongly coded in device tree. It's a fix for it.
* tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6ul: fix PWM[1-4] interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>
- fix GPU interrupts and operating voltage
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0LBHEACgkQWTcYmtP7
xmWjuw//aSfw9ezjFFhwVC2yEBb/lY85VSp5kA6R8p7TsieCFOU+qhY6zfhebu4x
DRJ5vtrQ8s+FaRwTCoOfupSbRXwN4WyN6SJVhYEwR/Jj4ExMxtWvKc7NoSIi1xGl
elvPEZ4wzoQ4eQIGKLwEa07vfSYKD03si9IWcp3TxEsmGMzzfhDyv2nT8ovS/t9B
D0y2Y/s6A40q6Pr4eATzyLAVCVDScOVCtkYmX5OzPhgOD+5pBTQSt5TPzH03prqU
dZ3cjOUmgvEt1WoZFajVJzngnN4qRTzVZnr9Aue4SS4qb0ytUrK9FtmnoU2LINbE
cX+rciZuxeRIZiNE/2lxBz7S1R9HwWVzRdzLwaCemm9T0SlJ4CrU1sA+Mdk3eAVM
Z6d3LYKm9Lbz99Jcy9sTbdjtrWJqYlucd9eJhjwfoQyk2gNuGQJvSWAHgLcw9N1O
WWcf9Bocj+iQBtn1/uPVCYHgqZaAFndf8iz955Mj+edONeycUglclBmIXHpu4TNJ
rFX3DalUsiGpHCto+9Hm9qGGXFnFE2FAimrtjeDKI7NcHQnGS1qgsWj/OTgGJVfD
/iq7/EF27hpm1fX1bzLaWA3LIl5oW4ycksI8qHFfxONx6jXePVkI9gTG96HNbf9n
XQ5xWcb1XaiG9Ox29sbqSkjrbLF4tGuoMtnkvZrFvLFAYWPEyIc=
=SdFR
-----END PGP SIGNATURE-----
Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes
ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: fix the operating voltage of the Mali GPU
ARM: dts: meson8b: drop undocumented property from the Mali GPU node
ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.3 please pull the following:
- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
controller
- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
and provides a fix for devices failing to boot after the removal of
skelton.dtsi (that commit has been submitted as a separate fix)
-----BEGIN PGP SIGNATURE-----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=AQ6F
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:
- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
controller
- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
and provides a fix for devices failing to boot after the removal of
skelton.dtsi (that commit has been submitted as a separate fix)
* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix most DTC W=1 warnings
ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
ARM: dts: BCM63xx: Fix DTC W=1 warnings
ARM: dts: BCM53573: Fix DTC W=1 warnings
ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
ARM: dts: Cygnus: Fix most DTC W=1 warnings
ARM: dts: Fix BCM7445 DTC warnings
ARM: bcm283x: Enable DMA support for SPI controller
ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>
The arm-nommu DMA code supports DMA_ATTR_NON_CONSISTENT allocations, but
does not provide a cache_sync operation. This means any user of it
will never be able to actually transfer cache ownership and thus cause
coherency bugs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Since the Linux 5.1 merge window we allow drivers to just set the
largest DMA mask they support instead of falling back to smaller ones.
But I forgot to remove a check that prohibits this behavior in the
arm DMA code, as it is rather hidden. There is not reason for this check
as the code will do the right thing for a "too large" DMA mask, so
just remove it.
Fixes: 9eb9e96e97 ("Documentation/DMA-API-HOWTO: update dma_mask sections")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the
GPU as much as possible however still few elements are missing:
1. Exynos4210 bus clock is not described in hardware manual therefore
the IP gate clock was provided,
2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for
gating entire IP block (it is now being disabled as unused),
3. Regulator supplies on Trats board.
Limited testing on Odroid U3 (Exynos4412).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add nodes for GPU (Mali 400) to Exynos3250. This is still limited and
not tested:
1. No dynamic voltage and frequency scaling,
2. Not sure what to do with CLK_G3D clock responsible for gating entire
IP block (it is now being disabled as unused).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The eMMC memory is supplied by LDO18 (PVDD_EMMC_1V8) and buck10
(PVDD_EMMCF_2V8), not by LDO10. The LDO10 (PVDD_PRE_1V8) supplies
instead VDDP_MMC pin of eMMC host interface and it is already marked as
always on.
This change only properly models the hardware and reflects in usage of
regulators. There is no functional change because:
1. LDO18 cannot be turned off (e.g. by lack of consumers) because in
off mode it is controlled by LDO18EN pin, which is pulled up by
always-on regulator LDO2 (PVDD_APIO_1V8).
2. LDO10 is marked as always on so removing its consumer will not have
effect.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add the PMIC regulator suspend configuration to entire Odroid
XU3/XU4/HC1 family of boards to reduce power usage during suspend. The
configuration is based on vendor (Hardkernel) reference kernel with
additional buck9 suspend configuration (for USB hub suspend and proper
reset).
Energy consumption measurements from Marek Szyprowski during suspend to
RAM:
- all at 5 V power supply,
- before: next-20190620,
- after: next-20190620 + this patch + suspend configuration for s2mps11
regulator driver,
Board | before [mA] | after [mA] |
Odroid HC1 | 120 | 7-10 |
Odroid XU4, sdcard | 88 | 6-9 |
Odroid XU4, eMMC | 100 | 6-9 |
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Add the PMIC regulator suspend configuration to Arndale Octa board to
reduce power usage during suspend and keep necessary regulators on. The
configuration is based on vendor (Insignal) reference kernel and the
board datasheet. Comparing to vendor kernel, additionally turn off in
suspend all regulators controlled by external pin (LDO3, LDO7, LDO18 and
buck10).
This is purely for hardware description because board does not support
Suspend to RAM and the S2MPS11 driver does not support
"regulator-on-in-suspend" property.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The eMMC memory on Odroid XU3/XU4 boards is supplied by two regulators
LDO18 and buck10 (and LDO13 for the host interface).
However the Odroid HC1 board does not have eMMC connector so this
regulator does not have to be always on.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable USBOTG1 support for evk board, it is dual-role function
port.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The patch adds the following interfaces according the SMARC Spec 1.1
[1] and provided schematics:
- SMARC SPI0/1
Note: Since Kontron still uses silicon revisions below 1.3 they have
add a spi-nor to implement Workaround #1 of erratum ERR006282.
- SMARC SDIO
- SMARC LCD
- SMARC HDMI
- SMARC Management pins
Note: Kontron don't route all of these pins to the i.MX6, some are
routed to the SoM CPLD.
- SMARC GPIO
- SMARC CSI Camera
Note: As specified in [1] the data lanes are shared to cover the
csi and the parallel case. The case depends on the baseboard so
muxing the data lanes is not part of this patch.
- SMARC I2S
- SMARC Watchdog
Note: The watchdog output pin is routed to the CPLD and the SMARC
header. The CPLD performs a reset after a 30s timeout so we
need to enable the watchdog per default.
- SMARC module eeprom
Due to the lack of hardware not all of these interfaces are tesetd.
[1] https://sget.org/standards/smarc
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the i.MX6UL/L RM, table 3.1 "ARM Cortex A7 domain interrupt
summary", the interrupts for the PWM[1-4] go from 83 to 86.
Fixes: b9901fe84f ("ARM: dts: imx6ul: add pwm[1-4] nodes")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In addition to the prefix ".exit", ".ARM.extab.exit" and ".ARM.exidx.exit"
must be recognized as exit sections as well. Otherwise, loading modules can
fail without CONFIG_MODULE_UNLOAD depending on the memory layout, when
relocations for the unwind sections refer to the .exit.text section:
imx_sdma: section 16 reloc 0 sym '': relocation 42 out of range
(0x7f015260 -> 0xc0f5a5e8)
where 0x7F000000 is the module load area and 0xC0000000 is the vmalloc
area. Relocation 42 refers to R_ARM_PREL31, which is limited to signed
31bit offsets.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
There are now no users of lubbock_set_misc_wr() outside lubbock.c, so
make this function static.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
These settings are needed to make the hardware operable.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The PEN2 line needs to be pulled up for the charger to enter high-current
mode. Do this with a static pull on the GPIO.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The dock detection input key is active low. Also add a pinmux for it.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This allows users of the pinctrl driver to specify either
pinctrl-single,bias-pullup = MPF_PULL_UP;
or
pinctrl-single,bias-pulldown = MPF_PULL_DOWN;
To activate the pull bits in the MFP registers.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant
module.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This file implements the flat get/put reloc helpers for architectures
that do not need to overload the relocs by simply using get_user/put_user.
Note that many nommu architectures currently use {get,put}_unaligned, which
looks a little bogus and should probably later be switched over to this
version as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Allow architectures to opt into ARCH_HAS_BINFMT_FLAT support instead of
assuming that all nommu ports support the format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
This will eventually allow us to kill the need for an <asm/flat.h> for
many cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Instead add a Kconfig variable that only h8300 selects.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
This way only the two architectures that do masking need to provide
the helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
This helper is a no-op on all architectures, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
This helper is the same for all architectures, open code it in the only
caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The return value is fixed. Remove it and amend the callers.
[ tglx: Fixup arm/bL_switcher and powerpc/rtas ]
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20190613064813.8102-2-namit@vmware.com
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
warnings.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes a number of unit_address_vs_reg warnings:
DTC arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb
arch/arm/boot/dts/bcm7445.dtsi:66.6-225.4: Warning (unit_address_vs_reg): /rdb: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445.dtsi:227.21-298.4: Warning (unit_address_vs_reg): /memory_controllers: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts:9.9-14.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445.dtsi:255.10-275.5: Warning (simple_bus_reg): /memory_controllers/memc@1: simple-bus unit address format error, expected "80000"
arch/arm/boot/dts/bcm7445.dtsi:277.10-297.5: Warning (simple_bus_reg): /memory_controllers/memc@2: simple-bus unit address format error, expected "100000"
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Without this, the driver for the BCM2835 SPI controller uses interrupt
mode instead of DMA mode, incurring a significant performance penalty.
The Foundation's device tree has had these attributes for years, but for
some reason they were never upstreamed.
They were originally contributed by Noralf Trønnes and Martin Sperl:
https://github.com/raspberrypi/linux/commit/25f3e064afc8https://github.com/raspberrypi/linux/commit/e0edb52b47e6
The DREQ numbers 6 and 7 are documented in section 4.2.1.3 of:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
problem with the VDSO generation on big endian.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VtLs
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one ARM fix this time around for Jason Donenfeld, fixing a
problem with the VDSO generation on big endian"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8867/1: vdso: pass --be8 to linker if necessary
We get a link error for configurations that enable an Exynos
SoC that does not require MCPM, but then manually enable
MCPM anyway without also turning on the arm-cci:
arch/arm/mach-exynos/mcpm-exynos.o: In function `exynos_pm_power_up_setup':
mcpm-exynos.c:(.text+0x8): undefined reference to `cci_enable_port_for_self'
Change it back to only build the code we actually need, by
introducing a CONFIG_EXYNOS_MCPM that serves the same purpose
as the older CONFIG_EXYNOS5420_MCPM.
Fixes: 2997520c2d ("ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
On disco and eval board, Tx and Rx delay are applied (pull-up of 4.7k
put on VDD) so which correspond to RGMII-ID mode with internal RX and TX
delays provided by the PHY, the MAC should not add the RX or TX delays
in this case
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add devicetree support for Avenger96 board based on STM32MP157A MPU
from ST Micro. This board is one of the 96Boards Consumer Edition board
from Arrow Electronics and has the following features:
SoC: STM32MP157AAC
PMIC: STPMIC1A
RAM: 1024 Mbyte @ 533MHz
Storage: eMMC v4.51: 8 Gbyte
microSD Socket: UHS-1 v3.01
Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant
Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
Bluetooth®v4.2 (BR/EDR/BLE)
USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG
Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4
LED: 4x User LED, 1x WiFi LED, 1x BT LED
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/avenger96/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add identification registers to address range
of SAI DT parent node, for stm32mp157c.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds a new property (power-supply) to panel rm68200 (raydium)
on stm32mp157c-ev1.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Make sure that ARM errata 814220 is selected by STM32MP157 SoC
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The v7 ARM states that all cache and branch predictor maintenance operations
that do not specify an address execute, relative to each other, in program
order. However, because of this erratum, an L2 set/way cache maintenance
operation can overtake an L1 set/way cache maintenance operation, this would
cause the data corruption.
This ERRATA affected the Cortex-A7 and present in r0p2, r0p3, r0p4, r0p5.
This patch is the SW workaround by adding a DSB before changing cache levels as
the ARM ERRATA: ARM/MP: 814220 told in the ARM ERRATA documentation.
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add CMT0 and CMT1 to the R-Car Gen2 V2H (r8a7792) SoC.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SDR50 isn't working anymore because the GPIO regulator
driver is using descriptors since
commit d6cd33ad71 ("regulator: gpio: Convert to use descriptors")
which in turn causes the system to use the polarity of the
GPIOs (as specified in the DT) for selecting the states,
but the polarity specified in the DT is wrong.
This patch fixes the regulator DT definition, and that fixes
SDR50.
Fixes: 9eb36b945b ("ARM: dts: iwg23s-sbc: Add uSD and eMMC support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SDR50 isn't working anymore because the GPIO regulator
driver is using descriptors since
commit d6cd33ad71 ("regulator: gpio: Convert to use descriptors")
which in turn causes the system to use the polarity of the
GPIOs (as specified in the DT) for selecting the states,
but the polarity specified in the DT is wrong.
This patch fixes the regulator DT definition, and that fixes
SDR50.
Fixes: 029efb3a03 ("ARM: dts: iwg20d-q7: Add SDHI1 support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for input switch SW3 on the Renesas RZ/A2M EVB
development board.
Note that this uses the IRQ interrupt, as the RZ/A2 GPIO controller
does not include interrupt support
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the IRQC on RZ/A2M, which is a small front-end to the
GIC. This allows to use up to 8 external interrupts with configurable
sense select.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch sorts the nodes of arch/arm/boot/dts/r7s9210-rza2mevb.dts.
* Sort subnodes of root ("/") node alphabetically
* Sort following top-level nodes alphabetically
* Sort subnodes of pinctrl alphabetically
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[simon: rebase and sort new ehci nodes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert bootargs from ip=dhcp to ip=on
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This cleanly handles arches who do not yet define clone3.
clone3() was initially placed under __ARCH_WANT_SYS_CLONE under the
assumption that this would cleanly handle all architectures. It does
not.
Architectures such as nios2 or h8300 simply take the asm-generic syscall
definitions and generate their syscall table from it. Since they don't
define __ARCH_WANT_SYS_CLONE the build would fail complaining about
sys_clone3 missing. The reason this doesn't happen for legacy clone is
that nios2 and h8300 provide assembly stubs for sys_clone. This seems to
be done for architectural reasons.
The build failures for nios2 and h8300 were caught int -next luckily.
The solution is to define __ARCH_WANT_SYS_CLONE3 that architectures can
add. Additionally, we need a cond_syscall(clone3) for architectures such
as nios2 or h8300 that generate their syscall table in the way I
explained above.
Fixes: 8f3220a806 ("arch: wire-up clone3() syscall")
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <adrian@lisas.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Fix gcc warnings:
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:456:13: warning: unused variable 'itcm_end' [-Wunused-variable]
extern u32 itcm_end;
^
arch/arm/mm/init.c:455:13: warning: unused variable 'dtcm_end' [-Wunused-variable]
extern u32 dtcm_end;
^
They are not used any more since
commit 1c31d4e96b ("ARM: 8820/1: mm: Stop printing the virtual memory layout")
Link: https://lkml.org/lkml/2019/5/12/82
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Some big.LITTLE systems have I-Cache line size mismatch between
LITTLE and big cores. This patch adds a workaround for proper I-Cache
support on such systems. Without it, some class of the userspace code
(typically self-modifying) might suffer from random SIGILL failures.
Similar workaround already exists for ARM64 architecture. I has been
added by commit 116c81f427 ("arm64: Work around systems with mismatched
cache line sizes").
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This adds support for working around errata A12 857271 / A17 857272.
These errata were causing hangs on rk3288-based Chromebooks and it was
confirmed that this workaround fixed the problems. In the Chrome OS
3.14 kernel this was treated as two errata: ERRATA_FOOBAR [1] and
ERRATA_CR711784 [2]. Apparently the two errata got lumped together at
some point in time.
Let's actually get the workaround landed.
[1] https://crrev.com/c/342753
[2] https://crbug.com/711784
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
GNU linker's -z common-page-size's default value is based on the target
architecture. arch/arm/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.
Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
show_pte() is used to print information after various other kernel
messages, which themselves are printed at different severities.
Include the severity in the show_pte() information so that associated
messages are printed with the same severity.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add a "8<--- cut here ---" marker to kernel dumps to help users cut
the dump at the right place when emailing list, rather than cutting
off the first line which gives the reason for the dump.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The commit fe00e50b2d ("ARM: 8858/1: vdso: use $(LD) instead of $(CC)
to link VDSO") removed the passing of CFLAGS, since ld doesn't take
those directly. However, prior, big-endian ARM was relying on gcc to
translate its -mbe8 option into ld's --be8 option. Lacking this, ld
generated be32 code, making the VDSO generate SIGILL when called by
userspace.
This commit passes --be8 if CONFIG_CPU_ENDIAN_BE8 is enabled.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The snps,reset-gpio bindings are deprecated in favour of the generic
"Ethernet PHY reset" bindings.
Replace snps,reset-gpio from the ðmac node with reset-gpios in the
ethernet-phy node. The old snps,reset-active-low property is now encoded
directly as GPIO flag inside the reset-gpios property.
snps,reset-delays-us is converted to reset-assert-us and
reset-deassert-us. reset-assert-us is the second cell from
snps,reset-delays-us while reset-deassert-us was the third cell.
Instead of blindly copying the old values (which seems strange since
they gave the PHY one second to come out of reset) over this also
updates the delays based on the datasheets:
- RTL8211F PHY on the Odroid-C1 and MXIII-Plus needs a 10ms assert
delay (the datasheet mentions: "For a complete PHY reset, this pin
must be asserted low for at least 10ms") and a 30ms deassert delay
(the datasheet mentions: "Wait for a further 30ms (for internal
circuits settling time) before accessing the PHY register"). The
old settings used 10ms for assert and 1000ms for deassert.
- IP101GR PHY on the EC-100 and MXQ needs a 10ms assert delay (the
datasheet mentions: "Trst | Reset period | 10ms") and a 10ms deassert
delay as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock
output ready after reset released | 10ms")). The old settings used
10ms for assert and 1000ms for deassert.
No functional changes intended.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Include corresponding headerfile <linux/platform-data/atmel.h> for
function at91_suspend_entering_slow_clock().
../arch/arm/mach-at91/pm.c:279:5: warning: no previous prototype for ‘at91_suspend_entering_slow_clock’ [-Wmissing-prototypes]
int at91_suspend_entering_slow_clock(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mazenauer <philippe.mazenauer@outlook.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This switches the DA850 board to use a GPIO lookup table to
look up the GPIO LEDs. Thanks to the offset handling when
we define GPIOs as an offset into the chip, we can drop
some complex code.
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables a handful of new drivers that have recently landed:
- Video caputre, for doing BMC virtual keyboard-video-mouse
- DRM driver for the BMC's own graphics device
- Error detection and correction
- P2A control, a BMC feature for moving data between the host and BMC
- RTC driver
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable the video engine and add it's optional reserved memory region.
Use 32MB for the reserved memory since the video engine could need up to
two 1920x1200@32bpp source buffers.
Source buffers: 2 * 1920 * 1200 * 4 = 18432000 bytes
In addition, the V4L2 subsystem will allocate any number of compression
buffers, each at most 1/8th the size of the source buffer.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The fp5280g2 is an OpenPower server platform with an ASPEED AST2500 BMC.
Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable support for Mali GPU with Panfrost and Lima drivers. Most of
Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable support for Mali GPU with Panfrost and Lima drivers. Most of
Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
As Mali GPU is quite popular among ARM vendors, other platforms will
benefit as well.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Move SoC-specific PMU properties from exynos4.dtsi to respective SoC
(4210 or 4412) so common DTSI would have only common properties.
Define there also interrupt affinity to remove the boot warning message:
hw perfevents: no interrupt-affinity property for /pmu, guessing.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Galaxy S3 boards use an aat1290 to control the flash LED. Add the
relevant device tree configuration to use it.
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> [rebase]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
OMAP2 depends on ARCH_MULTI_V6, which makes sure that the kernel is
compiled with -march=armv6. The compiler frontend will pass the
architecture to the assembler. There is no explicit architecture
specification necessary.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The LLVM Target parser currently does not allow to specify the security
extension as part of -march (see also LLVM Bug 40186 [0]). When trying
to use Clang with LLVM's integrated assembler, this leads to build
errors such as this:
clang-8: error: the clang compiler does not support '-Wa,-march=armv7-a+sec'
Use ".arch_extension sec" to enable the security extension in a more
portable fasion. Also make sure to use ".arch armv7-a" in case a v6/v7
multi-platform kernel is being built.
Note that this is technically not exactly the same as the old code
checked for availabilty of the security extension by calling as-instr.
However, there are already other sites which use ".arch_extension sec"
unconditionally, hence de-facto we need an assembler capable of
".arch_extension sec" already today (arch/arm/mm/proc-v7.S). The
arch extension "sec" is available since binutils 2.21 according to
its documentation [1].
[0] https://bugs.llvm.org/show_bug.cgi?id=40186
[1] https://sourceware.org/binutils/docs-2.21/as/ARM-Options.html
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mans Rullgard <mans@mansr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on
Arria10/Stratix10
- Add the ltc2497 i2c entry on the Arria10 devkit
- Add the EMAC OCP reset property on the Arria10
-----BEGIN PGP SIGNATURE-----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=22jl
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.3
- Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on
Arria10/Stratix10
- Add the ltc2497 i2c entry on the Arria10 devkit
- Add the EMAC OCP reset property on the Arria10
* tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: arria10: Add EMAC OCP reset property
ARM: dts: socfpga: add ltc2497 on arria10 devkit
arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" binding
ARM: dts: socfpga: use the "altr,socfpga-stmmac-a10-s10" binding
Signed-off-by: Olof Johansson <olof@lixom.net>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Based on 1 normalized pattern(s):
this software program is licensed subject to the gnu general public
license gpl version 2 june 1991 available at http www fsf org
copyleft gpl html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Daniel German <dmg@turingmachine.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.687420463@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under the terms of the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.087533673@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
omap3xxx_prm_enable_io_wakeup() is marked __init, but its caller is not, so
we get a warning with clang-8:
WARNING: vmlinux.o(.text+0x343c8): Section mismatch in reference from the function omap3xxx_prm_late_init() to the function .init.text:omap3xxx_prm_enable_io_wakeup()
The function omap3xxx_prm_late_init() references
the function __init omap3xxx_prm_enable_io_wakeup().
This is often because omap3xxx_prm_late_init lacks a __init
annotation or the annotation of omap3xxx_prm_enable_io_wakeup is wrong.
When building with gcc, omap3xxx_prm_enable_io_wakeup() is always
inlined, so we never noticed in the past.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Blank console after a while on the DIR-685 so as
not to waste power
- Fix up the erroneous compatible string on the DNS-313
-----BEGIN PGP SIGNATURE-----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=lkt2
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/fixes
This fixes up two issues with the Gemini DTS files:
- Blank console after a while on the DIR-685 so as
not to waste power
- Fix up the erroneous compatible string on the DNS-313
* tag 'gemini-dts-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini Fix up DNS-313 compatible string
ARM: dts: Blank D-Link DIR-685 console
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of armv7 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the goal of making it easier for CI services such as KernelCI to
run tests for it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The CONFIG_BACKLIGHT_LCD_SUPPORT was removed in commit 8c5dc8d9f1
("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel
symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now
available directly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DTS ARM changes for v5.3
1. Fixes for minor warnings.
2. Enable ADC on Exynos5410 Odroid XU board.
* tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XU
ARM: dts: exynos: Raise maximum buck regulator voltages on Arndale Octa
ARM: dts: exynos: Move CPU OPP tables out of SoC node on Exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv7 Vexpress updates for v5.3
1. Couple of updates switching to use new/updated bindings for CoreSight
dynamic funnel components and NOR flash partition type
2. Disable NOR flash on Vexpress TC2 platform as it conflicts with CPU
power management. This follows what we have on ARMv8 Juno platform
and is required after recent commit that enabled CFI NOR FLASH in
multi_v7 defconfig
* tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: set the right partition type for NOR flash
arm: dts: vexpress-v2p-ca15_a7: disable NOR flash node by default
ARM: dts: vexpress-v2p-ca15_a7: update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
ti-sysc dts changes for v5.3
We can now drop the custom dts property "ti,hwmods" for drivers that
have the ti-sysc interconnect target module configured in dts.
Let's start with a minimal changes to omap4 uart and mmc. We use
omap4 as the starting point as it has runtime PM implemented and all
the omap variants after that are based on it with similar clkctrl
clock for the modules. More devices will be updated later on as they
get tested.
Note that these changes are based on the related ti-sysc driver
changes.
* tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: Drop legacy custom hwmods property for omap4 mmc
ARM: dts: Drop legacy custom hwmods property for omap4 uart
bus: ti-sysc: Detect uarts also on omap34xx
bus: ti-sysc: Do rstctrl reset handling in two phases
bus: ti-sysc: Add support for disabling module without legacy mode
bus: ti-sysc: Set ENAWAKEUP if available
bus: ti-sysc: Handle swsup idle mode quirks
bus: ti-sysc: Handle clockactivity for enable and disable
bus: ti-sysc: Enable interconnect target module autoidle bit on enable
bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
bus: ti-sysc: Support 16-bit writes too
bus: ti-sysc: Add support for missing clockdomain handling
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
dts changes for omap variants for v5.3
This series of changes improves support for few boards:
- configure another lcd type for logicpd torpedo devkit
- a series of updates for am335x phytec boards
- configure mmc card detect pin for am335x-baltos
* tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-baltos: add support for MMC1 CD pin
ARM: dts: am335x-baltos: Fix PHY mode for ethernet
ARM: dts: Add support for phyBOARD-REGOR-AM335x
ARM: dts: am335x-pcm-953: Remove eth phy delay
ARM: dts: am335x-pcm-953: Update user led names
ARM: dts: am335x-phycore-som: Enable gpmc node in dts files
ARM: dts: am335x-phycore-som: Add emmc node
ARM: dts: am335x phytec boards: Remove regulator node
ARM: dts: Add LCD type 28 support to LogicPD Torpedo DM3730 devkit
Signed-off-by: Olof Johansson <olof@lixom.net>
all over the place.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlz/ZecQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYtuB/9uu5l+8ny2ea/5p11up58Vu97AYffchY4z
PuKTZvLlPGL/oe/7ZBCAZBrWiE2qDXrU+tDGnBGD9ZiF5aTHNNMFMH+GXlUNNQby
2gh3sVxjkesgg4fuMUhoipJVtIzZxh/t/+bKus2OSNTBfYAUY/LuB3MKO4NWSz+j
EnaKtzjV9WBn0K5NDxf6BiU6Inzhud+9xehKd55glwt6XWcvKCC+ejss9IYV+rC+
o/nA9Oz5K3vnJDZZCGKHcloowP5EWNXCXdVdMM1KpoIS0nTCKtO98vJ6Q7YXWIXD
L4Ia8NbqNKUfUhXYDA1MJN2y0dU9AhmptdOKbL/b/qhjenTUYQCT
=02qt
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot more love for rk3288 in general and veyron specially with changes
all over the place.
* tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices
ARM: dts: rockchip: Add HDMI i2c unwedging for rk3288-veyron
ARM: dts: rockchip: Add unwedge pinctrl entries for dw_hdmi on rk3288
ARM: dts: rockchip: Switch to builtin HDMI DDC bus on rk3288-veyron
ARM: dts: rockchip: Add pin names for rk3288-veyron jaq, mickey, speedy
ARM: dts: rockchip: fix pwm-cells for rk3288's pwm3
ARM: dts: rockchip: Configure the GPU thermal zone for mickey
ARM: dts: rockchip: Use the GPU to cool CPU thermal zone of veyron mickey
ARM: dts: rockchip: remove GPU 500 MHz OPP on rk3288
ARM: dts: rockchip: Use GPU as cooling device for the GPU thermal zone of the rk3288
ARM: dts: rockchip: Add #cooling-cells entry for rk3288 GPU
ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend
ARM: dts: rockchip: Add pin names for rk3288-veyron-jerry
ARM: dts: rockchip: Add pin names for rk3288-veyron-minnie
ARM: dts: raise GPU trip point temperature for speedy to 80 degC
ARM: dts: rockchip: raise GPU trip point temperatures for veyron
ARM: dts: rockchip: raise CPU trip point temperature for veyron to 100 degC
ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200
ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again
ARM: dts: rockchip: Remove bogus 'i2s_clk_out' from rk3288-veyron-mickey
...
Signed-off-by: Olof Johansson <olof@lixom.net>
It's a simple typo in the DNS file, which was pretty serious.
No scripts were working properly. Fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Leaving this NAS with display and backlight on heats it up
and dissipates power. Turn off the screen after 4 minutes,
it comes back on when a user touches the keys.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Multiple ixp4xx specific files require macros from irqs.h that
were moved out from mach/irqs.h, e.g.:
arch/arm/mach-ixp4xx/vulcan-pci.c:41:19: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
arch/arm/mach-ixp4xx/vulcan-pci.c:49:10: error: implicit declaration of function 'IXP4XX_GPIO_IRQ' [-Werror,-Wimplicit-function-declaration]
return IXP4XX_GPIO_IRQ(INTA);
Include this header in all files that failed to build because of
that.
Fixes: dc8ef8cd3a ("ARM: ixp4xx: Convert to SPARSE_IRQ")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Platforms should not normally select all the device drivers, leave that
up to the user and the defconfig file.
In this case, we get a warning for randconfig builds:
WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM
Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_8250 [=n] && OF [=y]
Selected by [y]:
- MACH_IXP4XX_OF [=y] && ARCH_IXP4XX [=y]
Fixes: 9540724ca2 ("ARM: ixp4xx: Add device tree boot support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
We want to be able to wake from USB if a device is plugged in that
wants remote wakeup. Enable it on both dwc2 controllers.
NOTE: this is added specifically to veyron and not to rk3288 in
general since it's not known whether all rk3288 boards are designed to
support USB wakeup. It is plausible that some boards could shut down
important rails in S3.
Also note that currently wakeup doesn't seem to happen unless you use
the "deep" suspend mode (where SDRAM is turned off). Presumably the
shallow suspend mode is gating some sort of clock that's important but
I couldn't easily figure out how to get it working.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Neither pinctrl_i2c1_gpio nor pinctrl_i2c2_gpio are used anywhere in
the file, drop them.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RPU2 uses UART2 as a serial console and UART1 is not used at all. Fix
incorrrectly specified 'stdout-path' to reflect that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add devicetree support for 96Boards Meerkat96 board from Novtech. This
board is one of the Consumer Edition boards of the 96Boards family based
on i.MX7D SoC. Following are the currently supported features of the
board:
* uSD
* WiFi/BT
* USB
More information about this board can be found in 96Boards product page:
https://www.96boards.org/product/imx7-96/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SNVS poweroff depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up to external PMIC.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The cleanup of the debugfs functions left one variable behind that
should now be removed as well:
arch/arm/mach-omap1/clock.c:1008:6: error: unused variable 'err' [-Werror,-Wunused-variable]
Fixes: d5ddd5a517 ("arm: omap1: no need to check return value of debugfs_create functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just two changes to make few platform data functions static, and to
call dev_info() if am437x is suspending to RTC-only mode. We want to
see this in case of issues as it depends on the board wiring for things
like DDR memory.
-----BEGIN PGP SIGNATURE-----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=+Fzf
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.3/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
ti-sysc soc changes for v5.3
Just two changes to make few platform data functions static, and to
call dev_info() if am437x is suspending to RTC-only mode. We want to
see this in case of issues as it depends on the board wiring for things
like DDR memory.
* tag 'omap-for-v5.3/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
Signed-off-by: Olof Johansson <olof@lixom.net>
changes for 5.3, please pull the following:
- Wen fixes a missing referenc count on the CPU device_node object
throughout mach-bcm/
- Jim adds the ability for ARCH_BRCMSTB to use reset controllers
- Doug adds the ability for ARCH_BRCMSTB to use the PINCTRL framework
-----BEGIN PGP SIGNATURE-----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=CdUx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.3/soc' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-based SoC Kconfig/machine
changes for 5.3, please pull the following:
- Wen fixes a missing referenc count on the CPU device_node object
throughout mach-bcm/
- Jim adds the ability for ARCH_BRCMSTB to use reset controllers
- Doug adds the ability for ARCH_BRCMSTB to use the PINCTRL framework
* tag 'arm-soc/for-5.3/soc' of https://github.com/Broadcom/stblinux:
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: bcm: fix a leaked reference by adding missing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
- Drop a slew of unused CLCD platform data
- Fix OF reference counts
-----BEGIN PGP SIGNATURE-----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=+jk4
-----END PGP SIGNATURE-----
Merge tag 'versatile-v5.3-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/soc
Versatile platform updates for the v5.3 kernel cycle:
- Drop a slew of unused CLCD platform data
- Fix OF reference counts
* tag 'versatile-v5.3-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: versatile: Drop CLCD platform data
ARM: versatile: fix a leaked reference by addingmissing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----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=MxUr
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drop-netx-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/soc
This deletes the NetX 100/500 machine support.
After discussing with the subarch maintainers and Hilscher,
we concluded that the netx subarchitecture (Netx 100/500)
is no longer maintained or tested, and noone will miss it
if we delete it. So delete it.
There is a newer Netx 4000 architecture which we may see
included at some point, but this will be supported using
the standard multiplatform and devicetree mechanisms and is
easier to develop from scratch.
* tag 'armsoc-drop-netx-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: delete netx machine
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of changes improves probing devices with ti-sysc to the
point where we can now probe most devices without the custom dts
property "ti,hwmods" and no legacy platform data :)
We add support for platform data callbacks for idling and unidling the
clockdomain the module belongs to. The rest of the series mostly adds
handling for the various quirks needed by old legacy modules such as
i2c and watchdog. Some quirk handling is still missing for few modules,
but those will be added as they get tested.
The related platform data and dts changes will be sent separately.
-----BEGIN PGP SIGNATURE-----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=Fxul
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
ti-sysc interconnect target module driver changes for v5.3
This series of changes improves probing devices with ti-sysc to the
point where we can now probe most devices without the custom dts
property "ti,hwmods" and no legacy platform data :)
We add support for platform data callbacks for idling and unidling the
clockdomain the module belongs to. The rest of the series mostly adds
handling for the various quirks needed by old legacy modules such as
i2c and watchdog. Some quirk handling is still missing for few modules,
but those will be added as they get tested.
The related platform data and dts changes will be sent separately.
* tag 'omap-for-v5.3/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add support for module specific reset quirks
bus: ti-sysc: Detect uarts also on omap34xx
bus: ti-sysc: Do rstctrl reset handling in two phases
bus: ti-sysc: Add support for disabling module without legacy mode
bus: ti-sysc: Set ENAWAKEUP if available
bus: ti-sysc: Handle swsup idle mode quirks
bus: ti-sysc: Handle clockactivity for enable and disable
bus: ti-sysc: Enable interconnect target module autoidle bit on enable
bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
bus: ti-sysc: Support 16-bit writes too
bus: ti-sysc: Add support for missing clockdomain handling
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
ARM: dts: Configure osc clock for d_can on am335x
Signed-off-by: Olof Johansson <olof@lixom.net>
Three fixes mostly for dra7 SoC variants that have some devices disabled
compared to the base SoC. These got broken by the change of making devices
probe with ti-sysc interconnect target module and went unnnoticed for a
while. And there is no clkcel bit for timer12 unlike timer1. Also included
is a GPIO direction fix for phytec SDIO card detection.
-----BEGIN PGP SIGNATURE-----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=g05K
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.2/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants
Three fixes mostly for dra7 SoC variants that have some devices disabled
compared to the base SoC. These got broken by the change of making devices
probe with ti-sysc interconnect target module and went unnnoticed for a
while. And there is no clkcel bit for timer12 unlike timer1. Also included
is a GPIO direction fix for phytec SDIO card detection.
* tag 'omap-for-v5.2/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x phytec boards: Fix cd-gpios active level
ARM: dts: dra72x: Disable usb4_tm target module
ARM: dts: Drop bogus CLKSEL for timer12 on dra7
Signed-off-by: Olof Johansson <olof@lixom.net>
This addresses an issue with probe of IO expander on DA850 EVM. There is
also a WARN_ON() fix on DA850 and DA830 devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1gFV
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
DaVinci fixes for v5.2 kernel.
This addresses an issue with probe of IO expander on DA850 EVM. There is
also a WARN_ON() fix on DA850 and DA830 devices.
* tag 'davinci-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da8xx: specify dma_coherent_mask for lcdc
ARM: davinci: da850-evm: call regulator_has_full_constraints()
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixing defconfig allowing to use Ethernet again on Armada 38x based
boards
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQNQDAAKCRALBhiOFHI7
1dqXAJ9ght2djbWrvtPLbfr10y7kkYFQHgCfbupD05I+H4+aGx7pnIvdvZ21qYU=
=SU1/
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.2-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 5.2 (part 1)
Fixing defconfig allowing to use Ethernet again on Armada 38x based
boards
* tag 'mvebu-fixes-5.2-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog
Signed-off-by: Olof Johansson <olof@lixom.net>
5.2-rc1, please pull the following:
- Florian fixes the remaining Broadcom DTS files to have a valid
device_type = "memory" property which was missed during the removal of
skeleton.dtsi
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlzi3CQACgkQh9CWnEQH
BwSFkg/+OJtdBwVrNwmXlw4B9di/oh1SRO8XgK+gn6siEVhlYr+qgyIRoKF0ZHcU
SdQfq8vLisUnccY3IhFymhNrqdKnkuRgFLAQsY5tt0nhTKmZXRfeNlHiloKbjT2y
bzkD4sA9J+QOawu1cskB8DNlgNHmUsdMN0eZLjaIvQtYB7e6XhxZu6U84O8wQk33
gKM3+ukAS/MXyQOJt1MfbaGu/M30u+YPtWUqeueKQ5sqUlRum8GymgUXn9DngRv0
t2eeBGXepwbs5LTMBKmeP/hQXvdSf6zaGO0UGzvp8v/k8Kxxf1oII54Nrk6aA2zy
h+YFouiuRSO+NrYdFEJJq0ZoQ93YvDM+B31HIrGO1KZk72P4m6yjqstRD5jiS11o
8OH2KQfv83xMuFA3IfKqw7NClSJn3FPYrSb6ZWSkuLq3xaPucytio2BtNLq2q611
2EJJsAPp+xV6wh9pCr/gcBg3vsDbk9Vw8uJYMjTds6WGy62JqQvYBfTTjh6mXqWo
kAVV2+cN0rOTABeFtbwU3xh5ygyVievzAEHhWWC1tHnCYJFlFpIackFWfqIvudm5
ETMsTQsFZ/OKPkzzJlzKSZjnSrsS/oEqpSuG5SQoqrT/Ih6fy5UBrseNUwMKOPL8
ch7XVLyPPkiYEkzhB7nFBkEeQoiuekcBFj/M5EnjA3J88Z7MZKA=
=rECv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.2/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.2-rc1, please pull the following:
- Florian fixes the remaining Broadcom DTS files to have a valid
device_type = "memory" property which was missed during the removal of
skeleton.dtsi
* tag 'arm-soc/for-5.2/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>
This series contains dra7 mmc voltage fixes, and fixes to the recent
changes to probe devices with device tree data insteas of legacy
platform data:
- Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
reset, the bootrom will try to access the mmc card at 3.3V potentially
damaging the card
- Two regression fixes for am335x d_can. We must allow devices with no
control registers for ti-sysc interconnect target module driver for
at least d_can, and we remove the incorrect control registers for
d_can. And we must configure the osc clock for d_can as otherwise
register access may fail depending on the bootloader version
- Four regression fixes for dra7 variant dts files to tag rtc and usb4
as disabled for dra71x and dra76x. These SoC variants do not have
these devices, and got accidentally enabled when the L4 interconnect
got defined in the dra7-l4.dtsi for the dra7 SoC family
-----BEGIN PGP SIGNATURE-----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=Ajjk
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants for dra7 mmc voltage and boot issues
This series contains dra7 mmc voltage fixes, and fixes to the recent
changes to probe devices with device tree data insteas of legacy
platform data:
- Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
reset, the bootrom will try to access the mmc card at 3.3V potentially
damaging the card
- Two regression fixes for am335x d_can. We must allow devices with no
control registers for ti-sysc interconnect target module driver for
at least d_can, and we remove the incorrect control registers for
d_can. And we must configure the osc clock for d_can as otherwise
register access may fail depending on the bootloader version
- Four regression fixes for dra7 variant dts files to tag rtc and usb4
as disabled for dra71x and dra76x. These SoC variants do not have
these devices, and got accidentally enabled when the L4 interconnect
got defined in the dra7-l4.dtsi for the dra7 SoC family
* tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
ARM: dts: Configure osc clock for d_can on am335x
Signed-off-by: Olof Johansson <olof@lixom.net>
- A build fix for soc-imx8 driver which needs SOC_BUS support. To
avoid dealing with the dependency for every single i.MX SoC bus
driver, we selects at from architecture level.
- A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only
after IPC is ready.
- A regression fix on cpuidle-imx6sx driver, which causes some
characters loss on serial communication.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc50FAAAoJEFBXWFqHsHzOt4wIAJJ4MLXCMKj2oVWXimkF3DAF
g9M7ridrarhPAXowuTYV4FuW7me7nPxr5VTmwVIJE23wEKdaOd7cg0tkmvMi0tG6
3TlNwCsEjJx+9rtGF196SZfR9HinLziAc4x7Qcl88xlQTQEIptvx6AMPit7Gy0je
MJ0PzLA1l+tazo7dXvMjZ+LkxlvLTSB/RuBciA8sgOvwsdbG1Azz/AduSLxO7e/T
ZSmEElTluqIKVxH5sbVY0T7mxWat7l5As28nx27cWDHGPoDMOt/TWiCTAvFR0d6T
m+bW6xcvy63Z2II1Er//ig4rwcmK1mcUv+3i63/sIkFxl9fa0H4WnTu67T+/mck=
=zbC7
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 5.2:
- A build fix for soc-imx8 driver which needs SOC_BUS support. To
avoid dealing with the dependency for every single i.MX SoC bus
driver, we selects at from architecture level.
- A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only
after IPC is ready.
- A regression fix on cpuidle-imx6sx driver, which causes some
characters loss on serial communication.
* tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX
firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready
arm64: imx: Fix build error without CONFIG_SOC_BUS
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for USB networking as a module to qcom_defconfig since its
a useful feature to have for development purposes.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the CMA (Contiguous Memory Allocator) for the MSM DRM/KMS driver,
the simple panel, and the TI LM3630A driver in order to support the
display on the LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add initial support for the display found on the LG Nexus 5 (hammerhead)
phone. This is based on work from Jonathan Marek.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the MDP5, DSI and DSI PHY blocks for the display found on the
msm8974 SoCs. This is based on work from msm8916.dtsi and Jonathan
Marek.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add necessary device tree nodes for the main LCD backlight.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for the Synaptics RMI4 touchscreen that is found on the
Nexus 5.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Convert kdump documentation to ReST and add it to the
user faced manual, as the documents are mainly focused on
sysadmins that would be enabling kdump.
Note: the vmcoreinfo.rst has one very long title on one of its
sub-sections:
PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask|PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)
I opted to break this one, into two entries with the same content,
in order to make it easier to display after being parsed in html and PDF.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
XCMhQ9s=
=cb80
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc4' into mauro
We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
This sets CONFIG_CPUFREQ_DT=m in davinci_all_defconfig. This is used for
frequency scaling on device tree boards.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable cpufreq-dt support for da850-evm. The cvdd is supplied by the
tps65070 pmic with configurable output voltage. By default da850-evm
boards support frequencies up to 375MHz so enable this operating
point.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add a fixed regulator for the da850-lcdk board along with board-specific
CPU configuration.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add a fixed regulator for the LEGO EV3 board along with board-specific
CPU configuration.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This adds a cpu node and operating points to the common da850.dtsi file.
All operating points above 300MHz are disabled by default.
Regulators need to be hooked up on a per-board basis.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The BB expander at 0x21 i2c bus 1 fails to probe on da850-evm because
the board doesn't set has_full_constraints to true in the regulator
API.
Call regulator_has_full_constraints() at the end of board registration
just like we do in da850-lcdk and da830-evm.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables wake up on Bluetooth activity when the device is
suspended. The BT_HOST_WAKE signal is only connected on devices
with BT module that are connected through UART.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Run savedefconfig to cleanup and reorganize the configs. Most entries
are only moved around and few options disappear because of defaults.
However this removes the already disabled OSS Emulation and OSS
Sequencer API (SND_MIXER_OSS, SND_PCM_OSS, SND_SEQUENCER_OSS). These
were already disabled (hidden by missing SND_OSSEMUL and SND_SEQUENCER)
and are not strictly hardware related, therefore they are not necessary
for providing reference hardware config.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add crypto node in device tree for CAAM support.
Noteworthy is that on 7ulp the interrupt line is shared
between the two job rings.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Constify the ctx and iv arguments to crypto_chacha_init() and the
various chacha*_stream_xor() functions. This makes it clear that they
are not modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable ECSPI2 and bind CPLD to both chip selects.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LS1021A-TSN is a development board built by VVDN/Argonboards in
partnership with NXP.
It features the LS1021A SoC and the first-generation SJA1105T Ethernet
switch for prototyping implementations of a subset of IEEE 802.1 TSN
standards.
It has two regular Ethernet ports and four switched, TSN-capable ports.
It also features:
- One Arduino header
- One expansion header
- Two USB 3.0 ports
- One mini PCIe slot
- One SATA interface
- Accelerometer, gyroscope, temperature sensors
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With
commit 6104c37094
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Aug 1 17:32:07 2017 +0200
fbcon: Make fbcon a built-time depency for fbdev
we have a static dependency between fbcon and fbdev, and we can
replace the indirection through the notifier chain with a function
call.
v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too,
and listens to this.
...
Looking at the code it seems to wait for some fb to show up, so that
it can get the framebuffer base address from the fb_info struct. I
suspect his is some firmware fbdev. Then it uses that information to
let the real fbdev driver (metronomefb.c by the looks) get at the
framebuffer memory.
This doesn't looke like it's easy to fix (except by deleting the
entire thing, seems untouched since 2008, we might be able to get away
with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and
cry over them for a bit.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
Allows to use the SD interface at a higher speed mode if the card
supports it. For this the signaling voltage is switched from 3.3V to
1.8V under the usdhc1's drivers control.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This converts the Wolfson Micro WM831x DCDC converter to use
a GPIO descriptor for the GPIO driving the DVS pin.
There is just one (non-DT) machine in the kernel using this, and
that is the Wolfson Micro (now Cirrus) Cragganmore 6410 so we
patch this board to pass a descriptor table and fix up the driver
accordingly.
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The IOP3xx has some elaborate code to directly slam the
GPIO lines multiplexed with I2C down low before enablement,
apparently a workaround for a hardware bug found in the
early chips.
After consulting the developer documentation for IOP80321
and IOP80331 I can clearly see that this may be useful for
IOP80321 family (mach-iop32x) but it is highly dubious for
any 80331 series or later chip: in these chips the lines
are not multiplexed for UARTs.
We convert the code to pass optional GPIO descriptors
and register these only on the 80321-based boards where
it makes sense, optionally obtain them in the driver and
use the gpiod_set_raw_value() to ascertain the line gets
driven low when needed.
The GPIO driver does not give the GPIO chip a reasonable
label so the patch also adds that so that these machine
descriptor tables can be used.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
According to latest docs imx7d chips can go from 800 to 1200 mhz.
Maximum frequency is determined from two speed grading bits present in
OCOTP fuses at same location as other imx chips.
Also update to "typical" voltages from latest datasheet, 25mv higher
than current dts.
All imx7s parts are still fixed at 800mhz
Based on:
* IMX7DCEC Rev. 6, 03/2019
* IMX7SCEC Rev. 6, 03/2019
* IMX7DRM Rev. 1, 01/2018 Page 1102
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx-cpufreq-dt driver can handle speed grading bits on imx7d just
like on imx8mq and imx8mm.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Compared to kernel 5.0, patches merged for 5.1 added support for A38x'
PHY guarded by a config option which was not enabled by default. As a
result, there was no eth1 and eth2 on a Solid Run Clearfog Base.
Ensure that A38x PHY is enabled on mvebu.
[gregory: issue appeared in 5.1 not in 5.2 and added Fixes tag]
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Fixes: a10c1c8191 ("net: marvell: neta: add comphy support")
Cc: stable@kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This updates the WL1831 bluetooth to use the serial serdev driver
interface.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i2c2 bus has a external plug which enables the easy connection of external
"bricks" with sensors of various kinds, while i2c4 on the Extended/Full boards
has a pair of on board motion sensors, accelerometer and magnetometer on one chip
and gyroscope on another so it makes sense to enable these i2c buses for use.
Tested on UDOO Neo Full.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use the SPDX License Identifier for GPL-2.0+ OR X11
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Baltos 5221/3220 devices provide CD signal on GPIO2_18.
Baltos 2110 device provides CD signal on GPIO1_15.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PHY must add both tx and rx delay and not only on the tx clock.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips like
BCM7211 which adopted that pin controller for GPIO.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Allow the use of reset controllers on ARCH_BRCMSTB such as the
recently introduced RESET_BRCMSTB driver.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Move the ADC from exynos5420.dtsi to a shared file between Exynos5410 and
Exynos542x: exynos54xx.dtsi. Enable the ADC on Odroid XU board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
There's no reason why we can't enable chained scatterlist for RiscPC,
we already support chained scatterlists in the IOMD DMA support code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reduce the amount of IRQ handling code that RiscPC requires; there's no
need for this duplication if we place the virtual iomem base address for
each bank directly in the irq_data structure. Provide helpers to get
the base address, and setup the base address and register mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the assembly files for RiscPC from arch/arm/lib to mach-rpc so
that we contain RiscPC bits in one subdirectory.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Correctly parse the video information from the tagged list, so that we
end up with the right bytes-per-char values. When booting with a
tagged list rather than a param block, this allows the decompressor to
display its messages during boot on the screen.
(Boot loaders normally pass a param block on this platform, but the
latest boot loader version recently released does not.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Atomwide 3port serial cards seem to leave their interrupts active when
exiting RISC OS, resulting in an interrupt storm during boot, and the
expansion card interrupt being disabled. Avoid this by manually
disabling the interrupt on each serial port via a custom quirk function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add the EMAC's OCP reset property on Arria10. The OCP reset bits are
also needed to correctly bring the EMACs out of reset correctly.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add the two ltc2497 devices that are on the SoCFPGA Arria10
Socdk board at addresses 0x14 and 0x16.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fix sparse warnings:
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:532:25: warning: symbol 'am33xx_gpio_hwmod_class' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:542:19: warning: symbol 'am33xx_gpio1_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:562:19: warning: symbol 'am33xx_gpio2_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:582:19: warning: symbol 'am33xx_gpio3_hwmod' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Default values fit better than these historical settings.
Hardware layout had been adapted accordingly already in
alpha stage. They did not cause problems for a long time.
Removed values now.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rename user led nodes to match the phytec user leds name scheme.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As nand flash is not always the primary storage device any more
disable it in the phycore-som include file. Enable it the device tree
files where it is populated.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The phyCORE-AM335x EMMC modules have an EMMC populated and are based
on the phyCORE-AM335x R2 SOM. Therefore, the EMMC node will be added to
the phycore-som devce tree but is by default disabled.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move regulators directly to the root node like most am335x boards do.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There are two LCD device released by Logic PD for the Torpedo,
type 15 and Type 28. The stock dts file supports the older LCD,
so this patch enables support for the newer one.
For details between these different LCD's see
https://support.logicpd.com/DesktopModules/Bring2mind/DMX/Download.aspx?portalid=0&EntryId=2777
Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed extra blank line for checkpatch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
