For Armada 7K/8K:
- enable AP806 thermal throttling with CPUfreq
- add missing #interrupt-cells property allowing configuring
interrupt for GPIO
On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB
On Armada 3720 based board espressobin correct the SPI node used for
NOR flash
On Armada 7040 DB board add USB current regulators
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQy4uwAKCRALBhiOFHI7
1dW6AJ9EYqnK7TQxYcxXl/gy8E5zaTH8igCeKGKpjV0P2sUv66nC3pmdipvMP68=
=KCf7
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.3 (part 1)
For Armada 7K/8K:
- enable AP806 thermal throttling with CPUfreq
- add missing #interrupt-cells property allowing configuring
interrupt for GPIO
On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB
On Armada 3720 based board espressobin correct the SPI node used for
NOR flash
On Armada 7040 DB board add USB current regulators
* tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add missing #interrupt-cells property
arm64: dts: marvell: armada-7040-db: Add USB current regulators
arm64: dts: armada-3720-espressobin: correct spi node
arm64: dts: marvell: Disable AP I2C on Armada-8040-DB
arm64: dts: marvell: Enable AP806 thermal throttling with CPUfreq
arm64: dts: marvell: Change core numbering in AP806 thermal-node
arm64: dts: marvell: clearfog-gt-8k: set SFP power limit
arm64: dts: marvell: mcbin: enlarge PCI memory window
Signed-off-by: Olof Johansson <olof@lixom.net>
Add LCD support on Netgear RN104
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQyyfAAKCRALBhiOFHI7
1ZPaAJ9AaFGTVnIuqe8EjZLOiKdO03oWMgCgm8Eu0d9566U2ibYCHCbHN0FbUpU=
=F0cP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt for 5.3 (part 1)
Add LCD support on Netgear RN104
* tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts.
Signed-off-by: Olof Johansson <olof@lixom.net>
* Renesas SoCs
- Revise usb2_phy nodes and phys properties according to updated bindings
- Use ip=on for bootargs
* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
- Add dynamic power coefficient
- Create thermal zone to support IPA
* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
- Point LVDS0 to its companion LVDS1
* R-Car E3 (r8a77990) SoC
- Corresct register range of DU
* R-Car E3 (r8a77990) based Ebisu board
- Remove renesas, no-ether-link property
* R-Car D3 (r8a77995) based Draak board:
- Remove unnecessary index from vin4 port
* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
- Initial support
- Describe CPU capacity and topoligy
- Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
* RZ/G2E (r8a774c0) SoC based EK874 board:
- Clean up CPU compatible strings
- Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
-----BEGIN PGP SIGNATURE-----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=Qsip
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Renesas ARM64 Based SoC DT Updates for v5.3
* Renesas SoCs
- Revise usb2_phy nodes and phys properties according to updated bindings
- Use ip=on for bootargs
* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
- Add dynamic power coefficient
- Create thermal zone to support IPA
* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
- Point LVDS0 to its companion LVDS1
* R-Car E3 (r8a77990) SoC
- Corresct register range of DU
* R-Car E3 (r8a77990) based Ebisu board
- Remove renesas, no-ether-link property
* R-Car D3 (r8a77995) based Draak board:
- Remove unnecessary index from vin4 port
* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
- Initial support
- Describe CPU capacity and topoligy
- Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
* RZ/G2E (r8a774c0) SoC based EK874 board:
- Clean up CPU compatible strings
- Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
arm64: dts: renesas: hihope-common: Remove "label" from LEDs
arm64: dts: renesas: hihope-common: Add HDMI support
arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
arm64: dts: renesas: hihope-common: Add LEDs support
arm64: dts: renesas: hihope-common: Enable USB3.0
arm64: dts: renesas: hihope-common: Add USB 2.0 support
arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
arm64: dts: renesas: r8a774a1: Add TMU device nodes
arm64: dts: renesas: r8a774a1: Add CMT device nodes
arm64: dts: renesas: hihope-common: Add uSD and eMMC
arm64: dts: renesas: r8a77990: Fix register range of display node
arm64: dts: renesas: cat874: Enable usb role switch support
arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
arm64: dts: renesas: hihope-common: Add RWDT support
arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
arm and arm64, a fix for the array syntax raised by our DT schemas.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
=4UQl
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.
* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array
Signed-off-by: Olof Johansson <olof@lixom.net>
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQcQAKCRDj7w1vZxhR
xbybAP9uAJcwix86BmYLIA3I7n1fT1oLooS+WfPL4btmqYBykAD/fK7Nn1g3alWg
7c61AEJKDHZwObU1dNpxjvsjT+/u+Qc=
=B/U5
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of arm64 DT changes, this time with:
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
* tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add DMA node
arm64: dts: allwinner: a64: Add lradc node
dt-bindings: input: sun4i-lradc-keys: Add A64 compatible
arm64: dts: allwinner: h6: add r_watchog node
arm64: dts: allwinner: h6: add watchdog node
dt-bindings: watchdog: add Allwinner H6 watchdog
arm64: dts: allwinner: a64: Enable audio on Teres-I
arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
arm64: dts: allwinner: axp803: add USB power supply node
arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD
arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64
arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQTgAKCRDj7w1vZxhR
xYkmAQDT7s1MRH9OEFQpS80BcWCvQoj0drr1ghHdXwwEbfuBUgEAoIuLrfH1Vjyi
ZcEJwPGowLmSEZezVWSLqTL76iajJg4=
=PAul
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches:
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
dt-bindings: pwm: Convert Allwinner PWM to a schema
ARM: dts: sun8i: r40: Change the RTC compatible
ARM: dts: sun8i: v3s: Add external crystals accuracy
ARM: dts: sun8i: v3s: Fix the RTC node
ARM: dts: sun6i: Add external crystals accuracy
ARM: dts: sun6i: Fix RTC node
ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
ARM: dts: gr8-evb: Fix RTC vendor
ARM: dts: sun7i: icnova-swac: Fix the model vendor
ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
ARM: dts: sun6i: Add default address and size cells for SPI
ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
dt-bindings: bus: Convert Allwinner RSB to a schema
ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
...
Signed-off-by: Olof Johansson <olof@lixom.net>
We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.
There are some AST2500 machines under development:
* Lenovo Hr630
* IBM Swift
* Facebook YAMP
And some AST2400 machines that have been around but out of tree and have
now joined the party:
* YADRO VESNIN
* Microsoft Olympus
-----BEGIN PGP SIGNATURE-----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=Hwcm
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.3
We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.
There are some AST2500 machines under development:
* Lenovo Hr630
* IBM Swift
* Facebook YAMP
And some AST2400 machines that have been around but out of tree and have
now joined the party:
* YADRO VESNIN
* Microsoft Olympus
* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
ARM: dts: aspeed: Add YADRO VESNIN BMC
ARM: dts: aspeed: Add Microsoft Olympus BMC
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
ARM: dts: aspeed: Add Facebook YAMP BMC
ARM: dts: aspeed: swift: Add pca9539 devices
ARM: dts: aspeed: Add Swift BMC machine
ARM: dts: aspeed: cmm: enable ehci host controllers
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
ARM: dts: aspeed: quanta-q71: Enable p2a node
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
ARM: dts: aspeed: Rename flash-controller nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q1ev
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm Device Tree Changes for v5.3
* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064
* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-hammerhead: add support for display
ARM: dts: msm8974: add display support
ARM: dts: qcom: msm8974-hammerhead: add support for backlight
ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
ARM: dts: qcom-msm8974: Update coresight DT bindings
ARM: dts: qcom-apq8064: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
- Updated CoreSight funnel and replicator using new bindings to fix warning
for the hip04.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vaAE
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs updates for v5.3
- Updated CoreSight funnel and replicator using new bindings to fix warning
for the hip04.
* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hip04: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
* Hi3660 SoC and related boards:
- Added CoreSight trace components
* Hi6220 SoC and related boards:
- Updated CoreSight funnel and replicator using new bindings to fix warning
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GTKf
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for v5.3
* Hi3660 SoC and related boards:
- Added CoreSight trace components
* Hi6220 SoC and related boards:
- Updated CoreSight funnel and replicator using new bindings to fix warning
* tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3660: Add CoreSight support
arm64: dts: hi6220: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.3 please pull the following:
- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
controller
- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
and provides a fix for devices failing to boot after the removal of
skelton.dtsi (that commit has been submitted as a separate fix)
-----BEGIN PGP SIGNATURE-----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=AQ6F
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:
- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
controller
- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
and provides a fix for devices failing to boot after the removal of
skelton.dtsi (that commit has been submitted as a separate fix)
* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix most DTC W=1 warnings
ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
ARM: dts: BCM63xx: Fix DTC W=1 warnings
ARM: dts: BCM53573: Fix DTC W=1 warnings
ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
ARM: dts: Cygnus: Fix most DTC W=1 warnings
ARM: dts: Fix BCM7445 DTC warnings
ARM: bcm283x: Enable DMA support for SPI controller
ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
warnings.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes a number of unit_address_vs_reg warnings:
DTC arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb
arch/arm/boot/dts/bcm7445.dtsi:66.6-225.4: Warning (unit_address_vs_reg): /rdb: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445.dtsi:227.21-298.4: Warning (unit_address_vs_reg): /memory_controllers: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts:9.9-14.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/bcm7445.dtsi:255.10-275.5: Warning (simple_bus_reg): /memory_controllers/memc@1: simple-bus unit address format error, expected "80000"
arch/arm/boot/dts/bcm7445.dtsi:277.10-297.5: Warning (simple_bus_reg): /memory_controllers/memc@2: simple-bus unit address format error, expected "100000"
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Without this, the driver for the BCM2835 SPI controller uses interrupt
mode instead of DMA mode, incurring a significant performance penalty.
The Foundation's device tree has had these attributes for years, but for
some reason they were never upstreamed.
They were originally contributed by Noralf Trønnes and Martin Sperl:
https://github.com/raspberrypi/linux/commit/25f3e064afc8https://github.com/raspberrypi/linux/commit/e0edb52b47e6
The DREQ numbers 6 and 7 are documented in section 4.2.1.3 of:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
The Allwinner SoCs have a PWM controller supported in Linux, with a
matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add CMT0 and CMT1 to the R-Car Gen2 V2H (r8a7792) SoC.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SDR50 isn't working anymore because the GPIO regulator
driver is using descriptors since
commit d6cd33ad71 ("regulator: gpio: Convert to use descriptors")
which in turn causes the system to use the polarity of the
GPIOs (as specified in the DT) for selecting the states,
but the polarity specified in the DT is wrong.
This patch fixes the regulator DT definition, and that fixes
SDR50.
Fixes: 9eb36b945b ("ARM: dts: iwg23s-sbc: Add uSD and eMMC support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
SDR50 isn't working anymore because the GPIO regulator
driver is using descriptors since
commit d6cd33ad71 ("regulator: gpio: Convert to use descriptors")
which in turn causes the system to use the polarity of the
GPIOs (as specified in the DT) for selecting the states,
but the polarity specified in the DT is wrong.
This patch fixes the regulator DT definition, and that fixes
SDR50.
Fixes: 029efb3a03 ("ARM: dts: iwg20d-q7: Add SDHI1 support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for input switch SW3 on the Renesas RZ/A2M EVB
development board.
Note that this uses the IRQ interrupt, as the RZ/A2 GPIO controller
does not include interrupt support
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the IRQC on RZ/A2M, which is a small front-end to the
GIC. This allows to use up to 8 external interrupts with configurable
sense select.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch sorts the nodes of arch/arm/boot/dts/r7s9210-rza2mevb.dts.
* Sort subnodes of root ("/") node alphabetically
* Sort following top-level nodes alphabetically
* Sort subnodes of pinctrl alphabetically
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[simon: rebase and sort new ehci nodes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Convert bootargs from ip=dhcp to ip=on
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The snps,reset-gpio bindings are deprecated in favour of the generic
"Ethernet PHY reset" bindings.
Replace snps,reset-gpio from the ðmac node with reset-gpios in the
ethernet-phy node. The old snps,reset-active-low property is now encoded
directly as GPIO flag inside the reset-gpios property.
snps,reset-delays-us is converted to reset-assert-us and
reset-deassert-us. reset-assert-us is the second cell from
snps,reset-delays-us while reset-deassert-us was the third cell.
Instead of blindly copying the old values (which seems strange since
they gave the PHY one second to come out of reset) over this also
updates the delays based on the datasheets:
- RTL8211F PHY on the Odroid-C1 and MXIII-Plus needs a 10ms assert
delay (the datasheet mentions: "For a complete PHY reset, this pin
must be asserted low for at least 10ms") and a 30ms deassert delay
(the datasheet mentions: "Wait for a further 30ms (for internal
circuits settling time) before accessing the PHY register"). The
old settings used 10ms for assert and 1000ms for deassert.
- IP101GR PHY on the EC-100 and MXQ needs a 10ms assert delay (the
datasheet mentions: "Trst | Reset period | 10ms") and a 10ms deassert
delay as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock
output ready after reset released | 10ms")). The old settings used
10ms for assert and 1000ms for deassert.
No functional changes intended.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable the video engine and add it's optional reserved memory region.
Use 32MB for the reserved memory since the video engine could need up to
two 1920x1200@32bpp source buffers.
Source buffers: 2 * 1920 * 1200 * 4 = 18432000 bytes
In addition, the V4L2 subsystem will allocate any number of compression
buffers, each at most 1/8th the size of the source buffer.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The fp5280g2 is an OpenPower server platform with an ASPEED AST2500 BMC.
Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The invalid definition in the supply causes the Qualcomm's EVB-1000
and EVB-4000 not to boot.
Fix the boot issue by correctly defining the supply: vdd_s3 (namely
"vdd_apc") is actually connected to vph_pwr.
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
- Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on
Arria10/Stratix10
- Add the ltc2497 i2c entry on the Arria10 devkit
- Add the EMAC OCP reset property on the Arria10
-----BEGIN PGP SIGNATURE-----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=22jl
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.3
- Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on
Arria10/Stratix10
- Add the ltc2497 i2c entry on the Arria10 devkit
- Add the EMAC OCP reset property on the Arria10
* tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: arria10: Add EMAC OCP reset property
ARM: dts: socfpga: add ltc2497 on arria10 devkit
arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" binding
ARM: dts: socfpga: use the "altr,socfpga-stmmac-a10-s10" binding
Signed-off-by: Olof Johansson <olof@lixom.net>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds DT bindings for the CoreSight trace components
on hi3660, which is used by 96boards Hikey960.
Signed-off-by: Wanglai Shi <shiwanglai@hisilicon.com>
Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Remove "label" properties from the LEDs device tree nodes, since
we don't have nice labels on the PCB.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add HDMI support to the HiHope RZ/G2[MN] mother board common
dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the HDMI encoder to the R8A774A1 DT in disabled state.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Samsung DTS ARM changes for v5.3
1. Fixes for minor warnings.
2. Enable ADC on Exynos5410 Odroid XU board.
* tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XU
ARM: dts: exynos: Raise maximum buck regulator voltages on Arndale Octa
ARM: dts: exynos: Move CPU OPP tables out of SoC node on Exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv7 Vexpress updates for v5.3
1. Couple of updates switching to use new/updated bindings for CoreSight
dynamic funnel components and NOR flash partition type
2. Disable NOR flash on Vexpress TC2 platform as it conflicts with CPU
power management. This follows what we have on ARMv8 Juno platform
and is required after recent commit that enabled CFI NOR FLASH in
multi_v7 defconfig
* tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: set the right partition type for NOR flash
arm: dts: vexpress-v2p-ca15_a7: disable NOR flash node by default
ARM: dts: vexpress-v2p-ca15_a7: update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv8 Juno updates for v5.3
Couple of updates switching to use new/updated bindings for CoreSight
dynamic funnel components and NOR flash partition type
* tag 'juno-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: set the right partition type for NOR flash
arm64: dts: juno: update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
ti-sysc dts changes for v5.3
We can now drop the custom dts property "ti,hwmods" for drivers that
have the ti-sysc interconnect target module configured in dts.
Let's start with a minimal changes to omap4 uart and mmc. We use
omap4 as the starting point as it has runtime PM implemented and all
the omap variants after that are based on it with similar clkctrl
clock for the modules. More devices will be updated later on as they
get tested.
Note that these changes are based on the related ti-sysc driver
changes.
* tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: Drop legacy custom hwmods property for omap4 mmc
ARM: dts: Drop legacy custom hwmods property for omap4 uart
bus: ti-sysc: Detect uarts also on omap34xx
bus: ti-sysc: Do rstctrl reset handling in two phases
bus: ti-sysc: Add support for disabling module without legacy mode
bus: ti-sysc: Set ENAWAKEUP if available
bus: ti-sysc: Handle swsup idle mode quirks
bus: ti-sysc: Handle clockactivity for enable and disable
bus: ti-sysc: Enable interconnect target module autoidle bit on enable
bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set
bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits
bus: ti-sysc: Support 16-bit writes too
bus: ti-sysc: Add support for missing clockdomain handling
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
