Here are a few amdkfd patches for 4.7, all of them fixes according to
the Coccinelle tool.
* tag 'drm-amdkfd-next-2016-05-04' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: Trim unnescessary intermediate err var in kfd_chardev.c
amdkfd: Trim off unnescessary semicolon from kfd_packet_manager.c
amdkfd: Use the canonical form in branch predicates
Here are some little fixes for rockchip drm, looks good for me, and seems there is no doubt on them, So I'd like you can land them.
* 'drm-rockchip-next-fixes-05-03' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: vop: Initialize vskiplines to zero
drm/rockchip: vop: fix iommu crash with async atomic
drm/rockchip: support non-iommu buffer path
drm/rockchip: get rid of rockchip_drm_crtc_mode_config
drm/rockchip: inno_hdmi: fix an error code
drm/rockchip: don't leak iommu mapping
drm/rockchip: remove redundant statement
Summary:
- Support for pipeline clock between KMS drivers.
. Exynos SoC is required to control clocks across KMS drivers
according to Exynos SoC version. So this patch refactos
some relevant codes and provides generic solution for it.
- Add Exynos5433 SoC support to HDMI parts - HDMI and DECON-TV.
- Add HW trigger mode support to CRTC drivers.
. In case of using i80 Panel, some Exynos SoC supports HW trigger
mode so this patch makes trigger mode - HW or SW trigger - to be
set according to SoC version properly.
- And some cleanups and regression fixups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (39 commits)
drm/exynos: clean up register definions for fimd and decon
drm/exynos: decon: clean up interface type
drm/exynos: fimd: add HW trigger support
drm/exynos: clean up wait_for_vblank
drm/exynos: mixer: use generic of_device_get_match_data helper
drm/exynos: mixer: remove support for non-dt platforms
drm/exynos: hdmi: use generic of_device_get_match_data helper
drm/exynos: rotator: use generic of_device_get_match_data helper
drm/exynos: fimd: use generic of_device_get_match_data helper
drm/exynos: dsi: use generic of_device_get_match_data helper
drm/exynos: exynos5433_decon: use generic of_device_get_match_data helper
drm/exynos: convert clock_enable crtc callback to pipeline clock
drm/exynos/mixer: enable HDMI-PHY before configuring MIXER
drm/exynos/decon5433: enable HDMI-PHY before configuring DECON
drm/exynos: add support for pipeline clock to the framework
drm/exynos: add helper to get crtc from pipe
drm/exynos/decon5433: do not protect window in plane disable
drm/exynos/decon5433: reset decon on start
drm/exynos/decon5433: fix DECON standalone update
drm/exynos/hdmi: remove registry dump
...
render nodes for vc4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3dIy
-----END PGP SIGNATURE-----
Merge tag 'drm-vc4-next-2016-05-02' of https://github.com/anholt/linux into drm-next
This pull request brings in DPI panel support, gamma ramp support, and
render nodes for vc4.
* tag 'drm-vc4-next-2016-05-02' of https://github.com/anholt/linux:
drm/vc4: Add missing render node support
drm/vc4: Add support for gamma ramps.
drm/vc4: Fix NULL deref in HDMI init error path
drm/vc4: Add DPI driver
drm: Add an encoder and connector type enum for DPI.
- prep work for struct_mutex-less gem_free_object
- more invasive/tricky mst fixes from Lyude for broken hw. I discussed
this with Ville/Jani and we all agreed more soaking in -next would be
real good this late in the -rc cycle. They're cc: stable too to make
sure they're not getting lost. Feel free to cherry-pick those four if
you disagree.
- few small things all over
* tag 'topic/drm-misc-2016-04-29' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: Add missing drm_crtc_internal.h include
drm/dp: Allow signals to interrupt drm_aux-dev reads/writes
drm: Quiet down drm_mode_getresources
drm: Quiet down drm_mode_getconnector
drm: Protect dev->filelist with its own mutex
drm: Make drm_vm_open/close_locked private to drm_vm.c
drm: Hide master MAP cleanup in drm_bufs.c
drm: Forbid legacy MAP functions for DRIVER_MODESET
drm: Push struct_mutex into ->master_destroy
drm: Move drm_getmap into drm_bufs.c and give it a legacy prefix
drm: Put legacy lastclose work into drm_legacy_dev_reinit
drm: Give drm_agp_clear drm_legacy_ prefix
drm/sysfs: Annote lockless show functions with READ_ONCE
MAINTAINERS: Update the files list for the GMA500 DRM driver
drm: rcar-du: Fix compilation warning
drm/i915: Get rid of intel_dp_dpcd_read_wake()
drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()
drm/dp_helper: Retry aux transactions on all errors
drm/dp_helper: Always wait before retrying native aux transactions
- more userptr cornercase fixes from Chris
- clean up and tune forcewake handling (Tvrtko)
- more underrun fixes from Ville, mostly for ilk to appeas CI
- fix unclaimed register warnings on vlv/chv and enable the debug code to catch
them by default (Ville)
- skl gpu hang fixes for gt3/4 (Mika Kuoppala)
- edram improvements for gen9+ (Mika again)
- clean up gpu reset corner cases (Chris)
- fix ctx/ring machine deaths on snb/ilk (Chris)
- MOCS programming for all engines (Peter Antoine)
- robustify/clean up vlv/chv irq handler (Ville)
- split gen8+ irq handlers into ack/handle phase (Ville)
- tons of bxt rpm fixes (mostly around firmware interactions), from Imre
- hook up panel fitting for dsi panels (Ville)
- more runtime PM fixes all over from Imre
- shrinker polish (Chris)
- more guc fixes from Alex Dai and Dave Gordon
- tons of bugfixes and small polish all over (but with a big focus on bxt)
* tag 'drm-intel-next-2016-04-25' of git://anongit.freedesktop.org/drm-intel: (142 commits)
drm/i915: Update DRIVER_DATE to 20160425
drm/i915/bxt: Explicitly clear the Turbo control register
drm/i915: Correct the i915_frequency_info debugfs output
drm/i915: Macros to convert PM time interval values to microseconds
drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
drm/i915: Fake HDMI live status
drm/i915/bxt: Force reprogramming a PHY with invalid HW state
drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already enabled
drm/i915/bxt: Use PHY0 GRC value for HW state verification
drm/i915: use dev_priv directly in gen8_ppgtt_notify_vgt
drm/i915/bxt: Enable DC5 during runtime resume
drm/i915/bxt: Sanitize DC state tracking during system resume
drm/i915/bxt: Don't uninit/init display core twice during system suspend/resume
drm/i915: Inline intel_suspend_complete
drm/i915/kbl: Don't WARN for expected secondary MISC IO power well request
drm/i915: Fix eDP low vswing for Broadwell
drm/i915: check for ERR_PTR from i915_gem_object_pin_map()
drm/i915/guc: local optimisations and updating comments
drm/i915/guc: drop cached copy of 'wq_head'
drm/i915/guc: keep GuC doorbell & process descriptor mapped in kernel
...
After async atomic_commit callback, drm_atomic_clean_old_fb will
clean all old fb, but because async, the old fb may be also on
the vop hardware, dma will access the old fb buffer, clean old
fb will cause iommu page fault.
Reference the fb and unreference it when the fb actuall swap out
from vop hardware.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Some rockchip vop not support iommu, need use non-iommu
buffer for it. And if we get iommu issues, we can compare
the issues with non-iommu path, that would help the debug.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
We need to take care of the vop status when use
rockchip_drm_crtc_mode_config, if vop is disabled,
the function would failed, that is terrible.
Save output_type and output_mode into rockchip_crtc_state,
it's nice to make them into atomic.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: John Keeping <john@metanate.com>
We were accidentally returning PTR_ERR(NULL) which means success when we
wanted to return a negative error code.
Fixes: 412d4ae6b7 ('drm/rockchip: hdmi: add Innosilicon HDMI support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yakir Yang <ykk@rock-chips.com>
arm_iommu_attach_device() takes its own reference to the mapping we give
it. Since we do not keep a reference to the mapping ourselves, we must
release it before returning.
Also fix the error path, which fails to release the mapping if it has
called arm_iommu_detach_device() since that clears archdata.mapping.
Signed-off-by: John Keeping <john@metanate.com>
The call to arm_iommu_detach_device() on the previous line sets
dev->archdata.mapping to NULL so this call is always a no-op.
Signed-off-by: John Keeping <john@metanate.com>
There shouldn't be any other driver support necessary, since none of
the driver-specific ioctls ever required auth, and none of them deal
with modesetting.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We could possibly save a bit of power by not requesting gamma
conversion when the ramp happens to be 1:1, but at least if all the
CRTCs are off the SRAM will be disabled.
This should fix brightness sliders in a lot of fullscreen games.
Signed-off-by: Eric Anholt <eric@anholt.net>
This patch removes suffixes from I80 relevant register definitions,
which are misleading.
This is based on top of below patch set,
http://www.spinics.net/lists/dri-devel/msg104057.html
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch cleans up interface type relevant codes.
Trigger mode is determinded only by i80 mode, which isn't
related to Display types - HDMI or Display controller.
So this patch makes the trigger mode to be set only in case of
i80 mode - For DECON-TV, HW Trigger mode is flaged mandatorily
because HDMI Timing Generator generates VSYNC signal
which works as a hardware trigger.
Changelog v2.
- If interface type is HDMI then set out_type to I80.
- fix compile warning.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds HW trigger support on i80 mode.
Until now, Exynos DRM only supported SW trigger which was set
SWTRGCMD bit of TRIGCON register by CPU to transfer scanout
buffer to Display bus device or panel.
With this patch, the transmission to Display bus device or
panel will be initiated by FIMD controller.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch cleans up wait_for_vblank relevant codes.
wait_for_vblank callback isn't used anymore in Exynos drm driver
so it removes relevant codes. However, display controllers -
FIMD and DECON - still use this function driver internally
to ensure shadow registers to be updated, which resolves
page fault issue so keep it.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There are no non-devicetree based Exynos platforms in mainline, so there
no point keeping old platform driver data for them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Simplify code by replacing custom code by generic helper and add missing
const qualifier to driver data structures.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
clock_enable callback is used only by FIMD->DP pipeline. Similar but more
universal functionality provides pipeline clock.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
According to documentation HDMI-PHY must be on prior to MIXER configuration.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Components belonging to the same pipeline often requires
synchronized clocks. Such clocks are sometimes provided
by external clock controller, but they can be also provided by
pipeline components. In latter case there should be a way
to access them from another component belonging to the same pipeline.
This is the case of:
- DECON,FIMD -> HDMI and HDMI-PHY clock,
- FIMD -> DP and DP clock in FIMD.
The latter case has been solved by clock_enable callback
in exynos_drm_crtc_ops. This solutin will not work with
HDMI path as in this case clock is provided by encoder.
This patch provides more generic solution allowing to register
pipeline clock during initialization in exynos_drm_crtc structure.
This way the clock will be easily accessible from both components.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The helper abstracts out conversion from pipeline
to crtc. Currently it is used in two places, but
there will be more uses in next patches.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
decon_atomic_begin and decon_atomic_flush protects all windows already.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Resetting IP at starting ensures that DECON will be in known state
regardless of changes by bootloader.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DECON should be updated after un-protecting windows and after changing
output parameters, otherwise image is not displayed in case of HDMI path.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
HDMI registry dump unnecessary spoils console and is not very helpful.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
To ensure HDMI-PHY reprogramming will not affect
HDMI the latter should be reset.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
HDMI-PHY power off bit defaults to 0 in older HDMI versions.
In case of Exynos5433 it defaults to 1. To make code
consistent across all versions this bit is always unset/set in
power on/off sequences.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Proper PHY configuration should be as follow:
1. set HDMI clock parents to OSCCLK.
2. reconfigure PHY.
3. set HDMI clock parents to PHY.
4. wait for PLL stabilization.
The patch fixes it and consolidates the code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DECON-TV(Display and Enhancement Controller for TV) is a variation
of DECON IP. Its main purpose is to produce video stream for HDMI IP.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DECON IP requires this clock to access configuration registers.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
HDMI on Exynos5433 differs from previous versions:
- different HDMI-PHY settings,
- different clocks,
- SYSREG registers for enabling reference clock,
- MODE_SET register in HDMI-PHY.
It is distinguished from other variants by different compatible string.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos5433 variant of HDMI requires different set of clocks and sysreg
phandle to system registers.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no point in rewriting default values, as the IP is reset anyway.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
HDMI-PHY configurations are stored as array pointer and count pair,
we can re-use existing helpers to simplify their initialization.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
