We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.
Repeating the commit description here for completeness:
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: 6de4a9c430 ("bpf: tcp: Add bpf_cubic example")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adjust the SEC("xdp_devmap/") prog type prefix to contain a
slash "/" for expected attach type BPF_XDP_DEVMAP. This is consistent
with other prog types like tracing.
Fixes: 2778797037 ("libbpf: Add SEC name for xdp programs attached to device map")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159309521882.821855.6873145686353617509.stgit@firesoul
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
check that 'nft ... ct helper set <foo>' works:
1. configure ftp helper via nft and assign it to
connections on port 2121
2. check with 'conntrack -L' that the next connection
has the ftp helper attached to it.
Also add a test for auto-assign (old behaviour).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes all over the place.
This includes a couple of tests that I would normally defer,
but since they have already been helpful in catching some bugs,
don't build for any users at all, and having them
upstream makes life easier for everyone, I think it's
ok even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7w3hcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpJ6UH/jVFVzILp3M5eVCewNsS2/j5HvRHxKb4DTwh
eoNTYMSLMy5UnwOdNZ3RjmNHxc8hS04fQsHZpI6mAIPSLWdswjmRwQPN03/fvP9M
nVdy3SxyU2ZzHbX/hRi3eTwhOkOY4RcyvkOjw49LLokIX6/DzsAO5ql3NAZW9vbL
LqZQKzAb7BeltH5RWbPPdF2UCZKia/x9QYHIXh0gJZj5YaAzlvJywNDQcxuiIODb
ZmHZZBaqZ66n99hWnSKfHtqX/fqRDqrdyameIVaSwgewho2AMj9V1FvvVMJWm669
PjQuHDf03TBBDNP9UwJRjdko7qA6aqX5Tef9aGMyBy2LJUD12A8=
=Z/dQ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place.
This includes a couple of tests that I would normally defer, but since
they have already been helpful in catching some bugs, don't build for
any users at all, and having them upstream makes life easier for
everyone, I think it's ok even at this late stage"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Use tools/include/list.h instead of stubs
tools/virtio: Reset index in virtio_test --reset.
tools/virtio: Extract virtqueue initialization in vq_reset
tools/virtio: Use __vring_new_virtqueue in virtio_test.c
tools/virtio: Add --reset
tools/virtio: Add --batch=random option
tools/virtio: Add --batch option
virtio-mem: add memory via add_memory_driver_managed()
virtio-mem: silence a static checker warning
vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()
vdpa: fix typos in the comments for __vdpa_alloc_device()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXvNBJgAKCRCRxhvAZXjc
oulGAPoCPfCguA8TPcy4tq4byGPoThyO4XnWR6XcUDOEzhbzzAEA+s5S7iRV8W92
p2gzbI4Kncq4dQNEtUvfPHQZDAEwTA0=
=eZDz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"This fixes a regression introduced with 303cc571d1 ("nsproxy: attach
to namespaces via pidfds").
The LTP testsuite reported a regression where users would now see
EBADF returned instead of EINVAL when an fd was passed that referred
to an open file but the file was not a namespace file.
Fix this by continuing to report EINVAL and add a regression test"
* tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test for setns() EINVAL regression
nsproxy: restore EINVAL for non-namespace file descriptor
The arm64 signal tests generate warnings during build since both they and
the toplevel lib.mk define a clean target:
Makefile:25: warning: overriding recipe for target 'clean'
../../lib.mk:126: warning: ignoring old recipe for target 'clean'
Since the inclusion of lib.mk is in the signal Makefile there is no
situation where this warning could be avoided so just remove the redundant
clean target.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200624104933.21125-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When producing the bpf-helpers.7 man page from the documentation from
the BPF user space header file, rst2man complains:
<stdin>:2636: (ERROR/3) Unexpected indentation.
<stdin>:2640: (WARNING/2) Block quote ends without a blank line; unexpected unindent.
Let's fix formatting for the relevant chunk (item list in
bpf_ringbuf_query()'s description), and for a couple other functions.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623153935.6215-1-quentin@isovalent.com
bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't
return .text "BPF program", if it is a function storage for sub-programs.
Because of that, any CO-RE relocation in helper non-inlined functions will
fail. Fix this by searching for .text-corresponding BPF program manually.
Adjust one of bpf_iter selftest to exhibit this pattern.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com
Before, we took a reference to the creating netns if the new netns was
different. This caused issues with circular references, with two
wireguard interfaces swapping namespaces. The solution is to rather not
take any extra references at all, but instead simply invalidate the
creating netns pointer when that netns is deleted.
In order to prevent this from happening again, this commit improves the
rough object leak tracking by allowing it to account for created and
destroyed interfaces, aside from just peers and keys. That then makes it
possible to check for the object leak when having two interfaces take a
reference to each others' namespaces.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Systems that doesn't yet have the very latest linux/bpf.h header, enum
bpf_stats_type will be undefined, causing compilation warnings. Prevents this
by forward-declaring enum.
Fixes: 0bee106716 ("libbpf: Add support for command BPF_ENABLE_STATS")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200621031159.2279101-1-andriin@fb.com
Quite a lot of fixes here for no single reason. There's a collection of
the usual sort of device specific fixes and also a bunch of people have
been working on spidev and the userspace test program spidev_test so
they've got an unusually large collection of small fixes.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7wl/8THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NJBB/4oTOxPIfkKQyPcSTQB8FC6AHJ5Z8FT
/4dtK4U32rn5Sms/CHNXMMFxomBgB46Ud19KJ/bEgqugJfI9Vl0bl9fZT+sDyVU3
rFPthVluIprFe1bITyfcgYmjRoznLRdzj9LMFsAWIe3Vmy584TdvXbl8n5COu5Wh
6sR6SuQnEn65x1HC4++3IsG70+ogz81sFRapk/7jXwS+YdwzWIqtN2s2IlUcTmcy
ylijl04XUSyo6e/v/sjZaaRmIz72mW+HbMKW4iC0mGZ6yuACoy7zop9BuwAg6S7z
dFDyqTZ5gq72ZeJc7fuco1y7jqQoKUC1oTRghPlbq2XG3Huta80l415l
=32lr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Quite a lot of fixes here for no single reason.
There's a collection of the usual sort of device specific fixes and
also a bunch of people have been working on spidev and the userspace
test program spidev_test so they've got an unusually large collection
of small fixes"
* tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: fix a potential use-after-free in spidev_release()
spi: spidev: fix a race between spidev_release and spidev_remove
spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
spi: uapi: spidev: Use TABs for alignment
spi: spi-fsl-dspi: Free DMA memory with matching function
spi: tools: Add macro definitions to fix build errors
spi: tools: Make default_tx/rx and input_tx static
spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
spi: rspi: Use requested instead of maximum bit rate
spi: spidev_test: Use %u to format unsigned numbers
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
On some platforms the default encoding is not utf-8, which causes an
UnicodeDecodeError when reading the flamegraph template and writing the
flamegraph
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200619153232.203537-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options
support for vxlan"), the geneve opt output use key word "geneve_opts"
instead of "geneve_opt". To make compatibility for both old and new
iproute2, let's accept both "geneve_opt" and "geneve_opts".
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXu1jrRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCMAP91nOccE3X+Nvc3zET3isDWnl1tWJxk
icsBgN/JwBRuTAD/dnWTHIWM2/5lTiagvyVsmINdJHP6JLr8T7dpN9tlxAQ=
=Cuo7
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
- Few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings.
- Cleanup unused pm callbacks in virtio ccw.
- Replace kmalloc + memset with kzalloc in crypto.
- Use $(LD) for vDSO linkage to make clang happy.
- Fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res().
- Fix workqueue cpumask warning when NUMA=n and nr_node_ids=2.
- Reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio.
- Few fixes to use scnprintf() instead of snprintf().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7uJy8ACgkQjYWKoQLX
FBitMwgAovHP6O19ZS2RE2Ps20CjM+z0sLLGHF6aMrV7OqmOWrNnFzN4jT2j42Ck
idSZ6sehVd3Uj6K8NnzrlSS3sjGRhVaQJEjjN+rLyw0HBwxspJJfW5HgcoMtqNH1
oo+nt+zw5jk+6MqHx4QEwTxN5rgGs6UMhiLIAIlkDu4bivgohvGUxe4RUrN/mINx
cdYqomCkvovLT5sBTaWyXKNCDAdAWgNpOfdqc9MjOUXSbUg3lrUol0gUULzenPo7
wUN+sZ0di0Ox0+2+4m8LU1av/kMTLSSvnR9DW5KdpGTon1nwpZcdJnhI5o1v7uaU
pIaMOYNieEHJ2DnieR9iBBSbGoNCmw==
=gkgN
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings
- cleanup unused pm callbacks in virtio ccw
- replace kmalloc + memset with kzalloc in crypto
- use $(LD) for vDSO linkage to make clang happy
- fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res()
- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2
- reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio
- a few fixes to use scnprintf() instead of snprintf()
* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix syscall_get_error for compat processes
s390/qdio: warn about unexpected SLSB states
s390/qdio: clean up usage of qdio_data
s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
s390/vdso: fix vDSO clock_getres()
s390/vdso: Use $(LD) instead of $(CC) to link vDSO
s390/protvirt: use scnprintf() instead of snprintf()
s390: use scnprintf() in sys_##_prefix##_##_name##_show
s390/crypto: use scnprintf() instead of snprintf()
s390/zcrypt: use kzalloc
s390/virtio: remove unused pm callbacks
s390/qdio: reduce SLSB writes during Input Queue processing
selftests/seccomp: s390 shares the syscall and return value register
s390/ptrace: fix setting syscall number
s390/ptrace: pass invalid syscall numbers to tracing
s390/ptrace: return -ENOSYS when invalid syscall is supplied
s390/seccomp: pass syscall arguments via seccomp_data
s390/qdio: fine-tune SLSB update
This Kselftest update for Linux 5.8-rc2 consists of:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
-----BEGIN PGP SIGNATURE-----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=nqUq
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest cleanups from Shuah Khan:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
* tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Support ":README" suffix for requires
selftests/ftrace: Support ":tracer" suffix for requires
selftests/ftrace: Convert check_filter_file() with requires list
selftests/ftrace: Convert required interface checks into requires list
selftests/ftrace: Add "requires:" list support
selftests/ftrace: Return unsupported for the unconfigured features
selftests/ftrace: Allow ":" in description
tools: testing: ftrace: trigger: fix spelling mistake
The ETF qdisc can queue skbs that it could not pace on the errqueue.
Address a few issues in the selftest
- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type
v2:
- fix a few checkpatch --strict indentation warnings
Fixes: ea6a547669 ("selftests/net: make so_txtime more robust to timer variance")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since many compilers cannot disable KCOV with a function attribute,
help it to NOP out any __sanitizer_cov_*() calls injected in noinstr
code.
This turns:
12: e8 00 00 00 00 callq 17 <lockdep_hardirqs_on+0x17>
13: R_X86_64_PLT32 __sanitizer_cov_trace_pc-0x4
into:
12: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
13: R_X86_64_NONE __sanitizer_cov_trace_pc-0x4
Just like recordmcount does.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
This provides infrastructure to rewrite instructions; this is
immediately useful for helping out with KCOV-vs-noinstr, but will
also come in handy for a bunch of variable sized jump-label patches
that are still on ice.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
With there being multiple ways to change the ELF data, let's more
concisely track modification.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.
[yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
BUILD: Doing 'make -j4' parallel build
HOSTCC fixdep.o
HOSTLD fixdep-in.o
LINK fixdep
<stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
<stdin>:1:0: warning: -fsanitize=address not supported for this target
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:224: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
[yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
/usr/include/gnu/libc-version.h
After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.
Committer testing:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:401: *** No libasan found, please install libasan. Stop.
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
$
$ sudo dnf install libasan
<SNIP>
Installed:
libasan-9.3.1-2.fc31.x86_64
$
$
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
<SNIP>
CC /tmp/build/perf/util/pmu-flex.o
FLEX /tmp/build/perf/util/expr-flex.c
CC /tmp/build/perf/util/expr-bison.o
CC /tmp/build/perf/util/expr.o
CC /tmp/build/perf/util/expr-flex.o
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/parse-events.o
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
INSTALL python-scripts
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
$
And if we rebuild without -fsanitize-address:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
CC /tmp/build/perf/exec-cmd.o
<SNIP>
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to move pointer checks like IS_ERR_VALUE() out of the hotpath
and into the reader path of a trace event, user space tools need to be
able to parse that. IS_ERR_VALUE() is defined as:
#define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
Which eventually turns into:
__builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0)
Now the traceevent parser can handle most of that except for the
__builtin_expect(), which needs to be added.
Link: https://lore.kernel.org/linux-mm/20200320055823.27089-3-jaewon31.kim@samsung.com/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.821799393@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit c61f13eaa1 ("gcc-plugins: Add structleak for more stack
initialization") added "__attribute__((user))" to the user when
stackleak detector is enabled. This now appears in the field format of
system call trace events for system calls that have user buffers. The
"__attribute__((user))" breaks the parsing in libtraceevent. That needs
to be handled.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's several locations that open code realloc and strcat() to append
text to strings. Add an append() function that takes a delimiter and a
string to append to another string.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Lim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 158 insertions(+), 59 deletions(-).
The main changes are:
1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii.
2) [gs]etsockopt fix for large optlen, from Stanislav.
3) devmap allocation fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
To pick the changes from:
b383a73f2b ("fs/ext4: Introduce DAX inode flag")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
It causes various beautifiers for things like fspick, fsmount, etc (see
below) to get rebuilt, but this specific change doesn't make 'perf
trace' be capable of decoding anything new, as we still don't decode
what comes from ioctls, just its cmds.
Details about the update:
$ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h
$ git diff
diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
index 379a612f8f1d..f44eb0a04afd 100644
--- a/tools/include/uapi/linux/fs.h
+++ b/tools/include/uapi/linux/fs.h
@@ -262,6 +262,7 @@ struct fsxattr {
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_DAX_FL 0x02000000 /* Inode is DAX */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
$ m
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
INSTALL GTK UI
CC /tmp/build/perf/builtin-trace.o
DESCEND plugins
CC /tmp/build/perf/trace/beauty/fsmount.o
CC /tmp/build/perf/trace/beauty/fspick.o
CC /tmp/build/perf/trace/beauty/mount_flags.o
CC /tmp/build/perf/trace/beauty/move_mount.o
CC /tmp/build/perf/trace/beauty/renameat.o
CC /tmp/build/perf/trace/beauty/sync_file_range.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
7e5b3c267d ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
With this one will be able to use these new AMD MSRs in filters, by
name, e.g.:
# perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
^C#
Using -v we can see how it sets up the tracepoint filters, converting
from the string in the filter to the numeric value:
# perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
Using CPUID GenuineIntel-6-8E-A
0x123
New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
mmap size 528384B
^C#
The updating process shows how this affects tooling in more detail:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300
+++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300
@@ -128,6 +128,10 @@
#define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */
#define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL 0x00000123
+#define RNGDS_MITG_DIS BIT(0)
+
#define MSR_IA32_SYSENTER_CS 0x00000174
#define MSR_IA32_SYSENTER_ESP 0x00000175
#define MSR_IA32_SYSENTER_EIP 0x00000176
$ set -o vi
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-06-17 10:05:49.653114752 -0300
+++ after 2020-06-17 10:06:01.777258731 -0300
@@ -51,6 +51,7 @@
[0x0000011e] = "IA32_BBL_CR_CTL3",
[0x00000120] = "IDT_MCR_CTRL",
[0x00000122] = "IA32_TSX_CTRL",
+ [0x00000123] = "IA32_MCU_OPT_CTRL",
[0x00000140] = "MISC_FEATURES_ENABLES",
[0x00000174] = "IA32_SYSENTER_CS",
[0x00000175] = "IA32_SYSENTER_ESP",
$
The related change to cpu-features.h affects this:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
This shouldn't be affecting that 'perf bench' entry:
$ find tools/perf/ -type f | xargs grep SRBDS
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:
```
$ perf record -z ls
...
[ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
$ memcheck perf script
...
==67911== Invalid read of size 4
==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100)
==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72)
==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583)
==67911== by 0x65BA59: reader__process_events (session.c:2177)
==67911== by 0x65BA59: __perf_session__process_events (session.c:2234)
==67911== by 0x65BA59: perf_session__process_events (session.c:2267)
==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447)
==67911== by 0x5A7397: cmd_script (builtin-script.c:3840)
==67911== by 0x5FE9D2: run_builtin (perf.c:312)
==67911== by 0x711627: handle_internal_command (perf.c:364)
==67911== by 0x711627: run_argv (perf.c:408)
==67911== by 0x711627: main (perf.c:538)
==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit c34a06c56d ("tools/bpftool: Add ringbuf map to a list of known
map types") added the symbolic "ringbuf" name. Document it in the bpftool
map command docs and usage as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch
Add testcases for the return value of the command to show
bootconfig in initrd, and double/single quotes selecting.
Link: http://lkml.kernel.org/r/159230247428.65555.2109472942519215104.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix bootconfig to return 0 if succeeded to show the bootconfig
in initrd. Without this fix, "bootconfig INITRD" command
returns !0 even if the command succeeded to show the bootconfig.
Link: http://lkml.kernel.org/r/159230246566.65555.11891772258543514487.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 950313ebf7 ("tools: bootconfig: Add bootconfig command")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix bootconfig tool to select double or single quotes
correctly according to the value.
If a bootconfig value includes a double quote character,
we must use single-quotes to quote that value.
Link: http://lkml.kernel.org/r/159230245697.65555.12444299015852932304.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 950313ebf7 ("tools: bootconfig: Add bootconfig command")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Verify that setns() reports EINVAL when an fd is passed that refers to an
open file but the file is not a file descriptor useable to interact with
namespaces.
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Cyril Hrubis <chrubis@suse.cz>
Link: https://lore.kernel.org/lkml/20200615085836.GR12456@shao2-debian
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Add ":README" suffix support for the requires list, so that
the testcase can list up the required string for README file
to the requires list.
Note that the required string is treated as a fixed string,
instead of regular expression. Also, the testcase can specify
a string containing spaces with quotes. E.g.
# requires: "place: [<module>:]<symbol>":README
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add ":tracer" suffix support for the requires list, so that
the testcase can list up the required tracer (e.g. function)
to the requires list.
For example, if the testcase requires function_graph tracer,
it can write requires list as below instead of checking
available_tracers.
# requires: function_graph:tracer
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since check_filter_file() is basically checking the filter
tracefs file, we can convert it into requires list.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce "requires:" list to check required ftrace interface
for each test. This will simplify the interface checking code
and unify the error message. Another good point is, it can
skip the ftrace initializing.
Note that this requires list must be written as a shell
comment.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As same as other test cases, return unsupported if kprobe_events
or argument access feature are not found.
There can be a new arch which does not port those features yet,
and an older kernel which doesn't support it.
Those can not enable the features.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow ":" in the description line. Currently if there is ":"
in the test description line, the description is cut at that
point, but that was unintended.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
s390 cannot set syscall number and reture code at the same time,
so set the appropriate flag to indicate it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Add symbolic name "ringbuf" to map to BPF_MAP_TYPE_RINGBUF. Without this,
users will see "type 27" instead of "ringbuf" in `map show` output.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200615225355.366256-1-andriin@fb.com
Fix definition of bpf_ringbuf_output() in UAPI header comments, which is used
to generate libbpf's bpf_helper_defs.h header. Return value is a number (error
code), not a pointer.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200615214926.3638836-1-andriin@fb.com
The UBSAN instrumentation only inserts external CALLs when things go
'BAD', much like WARN(). So treat them similar to WARN()s for noinstr,
that is: allow them, at the risk of taking the machine down, to get
their message out.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove invalid assumption in libbpf that .bss map doesn't have to be updated
in kernel. With addition of skeleton and memory-mapped initialization image,
.bss doesn't have to be all zeroes when BPF map is created, because user-code
might have initialized those variables from user-space.
Fixes: eba9c5f498 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612194504.557844-1-andriin@fb.com
Remove unnecessary check at the end of codegen() routine which makes codegen()
to always fail and exit bpftool with error code. Positive value of variable
n is not an indicator of a failure.
Fixes: 2c4779eff8 ("tools, bpftool: Exit on error in function codegen")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/bpf/20200612201603.680852-1-andriin@fb.com
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
KCSAN is a dynamic race detector, which relies on compile-time
instrumentation, and uses a watchpoint-based sampling approach to detect
races.
The feature was under development for quite some time and has already found
legitimate bugs.
Unfortunately it comes with a limitation, which was only understood late in
the development cycle:
It requires an up to date CLANG-11 compiler
CLANG-11 is not yet released (scheduled for June), but it's the only
compiler today which handles the kernel requirements and especially the
annotations of functions to exclude them from KCSAN instrumentation
correctly.
These annotations really need to work so that low level entry code and
especially int3 text poke handling can be completely isolated.
A detailed discussion of the requirements and compiler issues can be found
here:
https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
We came to the conclusion that trying to work around compiler limitations
and bugs again would end up in a major trainwreck, so requiring a working
compiler seemed to be the best choice.
For Continous Integration purposes the compiler restriction is manageable
and that's where most xxSAN reports come from.
For a change this limitation might make GCC people actually look at their
bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed'
3 years ago with a half baken solution which 'solved' the reported issue
but not the underlying problem.
The KCSAN developers also ponder to use a GCC plugin to become independent,
but that's not something which will show up in a few days.
Blocking KCSAN until wide spread compiler support is available is not a
really good alternative because the continuous growth of lockless
optimizations in the kernel demands proper tooling support.
-----BEGIN PGP SIGNATURE-----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=iplm
-----END PGP SIGNATURE-----
Merge tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull the Kernel Concurrency Sanitizer from Thomas Gleixner:
"The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector,
which relies on compile-time instrumentation, and uses a
watchpoint-based sampling approach to detect races.
The feature was under development for quite some time and has already
found legitimate bugs.
Unfortunately it comes with a limitation, which was only understood
late in the development cycle:
It requires an up to date CLANG-11 compiler
CLANG-11 is not yet released (scheduled for June), but it's the only
compiler today which handles the kernel requirements and especially
the annotations of functions to exclude them from KCSAN
instrumentation correctly.
These annotations really need to work so that low level entry code and
especially int3 text poke handling can be completely isolated.
A detailed discussion of the requirements and compiler issues can be
found here:
https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
We came to the conclusion that trying to work around compiler
limitations and bugs again would end up in a major trainwreck, so
requiring a working compiler seemed to be the best choice.
For Continous Integration purposes the compiler restriction is
manageable and that's where most xxSAN reports come from.
For a change this limitation might make GCC people actually look at
their bugs. Some issues with CSAN in GCC are 7 years old and one has
been 'fixed' 3 years ago with a half baken solution which 'solved' the
reported issue but not the underlying problem.
The KCSAN developers also ponder to use a GCC plugin to become
independent, but that's not something which will show up in a few
days.
Blocking KCSAN until wide spread compiler support is available is not
a really good alternative because the continuous growth of lockless
optimizations in the kernel demands proper tooling support"
* tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining
compiler.h: Move function attributes to compiler_types.h
compiler.h: Avoid nested statement expression in data_race()
compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE()
kcsan: Update Documentation to change supported compilers
kcsan: Remove 'noinline' from __no_kcsan_or_inline
kcsan: Pass option tsan-instrument-read-before-write to Clang
kcsan: Support distinguishing volatile accesses
kcsan: Restrict supported compilers
kcsan: Avoid inserting __tsan_func_entry/exit if possible
ubsan, kcsan: Don't combine sanitizer with kcov on clang
objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn()
kcsan: Add __kcsan_{enable,disable}_current() variants
checkpatch: Warn about data_race() without comment
kcsan: Use GFP_ATOMIC under spin lock
Improve KCSAN documentation a bit
kcsan: Make reporting aware of KCSAN tests
kcsan: Fix function matching in report
kcsan: Change data_race() to no longer require marking racing accesses
kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h
...
Currently, the codegen function might fail and return an error. But its
callers continue without checking its return value. Since codegen can
fail only in the unlikely case of the system running out of memory or
the static template being malformed, just exit(-1) directly from codegen
and make it void-returning.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200611103341.21532-1-tklauser@distanz.ch
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It was reported that older GCCs compile smm_test in a way that breaks
it completely:
kvm_exit: reason EXIT_CPUID rip 0x4014db info 0 0
func 7ffffffd idx 830 rax 0 rbx 0 rcx 0 rdx 0, cpuid entry not found
...
kvm_exit: reason EXIT_MSR rip 0x40abd9 info 0 0
kvm_msr: msr_read 487 = 0x0 (#GP)
...
Note, '7ffffffd' was supposed to be '80000001' as we're checking for
SVM. Dropping '-O2' from compiler flags help. Turns out, asm block in
sync_with_host() is wrong. We us 'in 0xe, %%al' instruction to sync
with the host and in 'AL' register we actually pass the parameter
(stage) but after sync 'AL' gets written to but GCC thinks the value
is still there and uses it to compute 'EAX' for 'cpuid'.
smm_test can't fully use standard ucall() framework as we need to
write a very simple SMI handler there. Fix the immediate issue by
making RAX input/output operand. While on it, make sync_with_host()
static inline.
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610164116.770811-1-vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_HYPERV_ENLIGHTENED_VMCS will be reported as supported even when
nested VMX is not, fix evmcs_test/hyperv_cpuid tests to check for both.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for
nested VMX/SVM presence and this is incorrect. Check for the required
features dirrectly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following sparse warning:
./spidev_test.c:50:9: warning: symbol 'default_tx' was not declared. Should it be static?
./spidev_test.c:59:9: warning: symbol 'default_rx' was not declared. Should it be static?
./spidev_test.c:60:6: warning: symbol 'input_tx' was not declared. Should it be static?
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Link: https://lore.kernel.org/r/1591880212-13479-1-git-send-email-zhangqing@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Free the memory allocated for the template on error paths in function
codegen.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200610130804.21423-1-tklauser@distanz.ch
When cgroup_skb/egress triggers the MAC header is not set. Added a
test that asserts reading MAC header is a -EFAULT but NET header
succeeds. The test result from within the eBPF program is stored in
an 1-element array map that the userspace then reads and asserts on.
Another assertion is added that reading from a large offset, past
the end of packet, returns -EFAULT.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/9028ccbea4385a620e69c0a104f469ffd655c01e.1591812755.git.zhuyifei@google.com
The loop exits with "timeout" set to -1 and not to 0 so the test needs to
be fixed.
Fixes: e7b592f6caca ("khugepaged: add self test")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zi Yan <ziy@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200605110736.GH978434@mwanda
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the ACPICA code in the kernel to upstream revision 20200528
with the following changes:
- Remove some dead code from the acpidump utility (Bob Moore).
- Add new OperationRegion subtype keyword PlatformRtMechanism
to the compiler (Erik Kaneda).
-----BEGIN PGP SIGNATURE-----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=fzrg
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Update the ACPICA code in the kernel to upstream revision 20200528
with the following changes:
- Remove some dead code from the acpidump utility (Bob Moore)
- Add new OperationRegion subtype keyword PlatformRtMechanism to the
compiler (Erik Kaneda)"
* tag 'acpi-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Update version to 20200528
ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism
ACPICA: acpidump: Removed dead code from oslinuxtbl.c
* acpica:
ACPICA: Update version to 20200528
ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism
ACPICA: acpidump: Removed dead code from oslinuxtbl.c
This avoids multiple declarations if the flex header is included.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200609234344.3795-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows transparent cross-compilation with CROSS_COMPILE by
relying on 7ed1c1901f ("tools: fix cross-compile var clobbering").
Same change was applied to tools/bpf/bpftool/Makefile in
9e88b9312a ("tools: bpftool: do not force gcc as CC").
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200609213506.3299-1-brett.mastbergen@gmail.com
Handle a GCC quirk of emitting extra volatile modifier in DWARF (and
subsequently preserved in BTF by pahole) for function pointers marked as
__attribute__((noreturn)). This was the way to mark such functions before GCC
2.5 added noreturn attribute. Drop such func_proto modifiers, similarly to how
it's done for array (also to handle GCC quirk/bug).
Such volatile attribute is emitted by GCC only, so existing selftests can't
express such test. Simple repro is like this (compiled with GCC + BTF
generated by pahole):
struct my_struct {
void __attribute__((noreturn)) (*fn)(int);
};
struct my_struct a;
Without this fix, output will be:
struct my_struct {
voidvolatile (*fn)(int);
};
With the fix:
struct my_struct {
void (*fn)(int);
};
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/bpf/20200610052335.2862559-1-andriin@fb.com
getopt_long requires the last element to be filled with zeros.
Otherwise, passing an unrecognized option can cause a segfault.
Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using BPF_PROG_ATTACH to attach a program to a cgroup in
BPF_F_ALLOW_MULTI mode, it is not possible to replace a program
with itself. This is because the check for duplicate programs
doesn't take the replacement program into account.
Replacing a program with itself might seem weird, but it has
some uses: first, it allows resetting the associated cgroup storage.
Second, it makes the API consistent with the non-ALLOW_MULTI usage,
where it is possible to replace a program with itself. Third, it
aligns BPF_PROG_ATTACH with bpf_link, where replacing itself is
also supported.
Sice this code has been refactored a few times this change will
only apply to v5.7 and later. Adjustments could be made to
commit 1020c1f24a ("bpf: Simplify __cgroup_bpf_attach") and
commit d7bf2c10af ("bpf: allocate cgroup storage entries on attaching bpf programs")
as well as commit 324bda9e6c ("bpf: multi program support for cgroup+bpf")
Fixes: af6eea5743 ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200608162202.94002-1-lmb@cloudflare.com
No new features this release. Mostly clean ups, restructuring and
documentation.
- Have ftrace_bug() show ftrace errors before the WARN, as the WARN will
reboot the box before the error messages are printed if panic_on_warn
is set.
- Have traceoff_on_warn disable tracing sooner (before prints)
- Write a message to the trace buffer that its being disabled when
disable_trace_on_warning() is set.
- Separate out synthetic events from histogram code to let it be used by
other parts of the kernel.
- More documentation on histogram design.
- Other small fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXt+LEhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj2zAP9sD/W4jafYayucj+MvRP7sy+Q0iAH7
WMn8fkk958cgfQD8D1QFtkkx+3O3TRT6ApGf11w5+JgSWUE2gSbW9H4fPQk=
=X5t4
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"No new features this release. Mostly clean ups, restructuring and
documentation.
- Have ftrace_bug() show ftrace errors before the WARN, as the WARN
will reboot the box before the error messages are printed if
panic_on_warn is set.
- Have traceoff_on_warn disable tracing sooner (before prints)
- Write a message to the trace buffer that its being disabled when
disable_trace_on_warning() is set.
- Separate out synthetic events from histogram code to let it be used
by other parts of the kernel.
- More documentation on histogram design.
- Other small fixes and clean ups"
* tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option
tracing/doc: Fix ascii-art in histogram-design.rst
tracing: Add a trace print when traceoff_on_warning is triggered
ftrace,bug: Improve traceoff_on_warn
selftests/ftrace: Distinguish between hist and synthetic event checks
tracing: Move synthetic events to a separate file
tracing: Fix events.rst section numbering
tracing/doc: Fix typos in histogram-design.rst
tracing: Add hist_debug trace event files for histogram debugging
tracing: Add histogram-design document
tracing: Check state.disabled in synth event trace functions
tracing/probe: reverse arguments to list_add
tools/bootconfig: Add a summary of test cases and return error
ftrace: show debugging information when panic_on_warn set
This Kunit update for Linux 5.8-rc1 consists of:
- Several config fragment fixes from Anders Roxell to improve
test coverage.
- Improvements to kunit run script to use defconfig as default and
restructure the code for config/build/exec/parse from Vitor Massaru Iha
and David Gow.
- Miscellaneous documentation warn fix.
-----BEGIN PGP SIGNATURE-----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=S+HY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit updates from Shuah Khan:
"This consists of:
- Several config fragment fixes from Anders Roxell to improve test
coverage.
- Improvements to kunit run script to use defconfig as default and
restructure the code for config/build/exec/parse from Vitor Massaru
Iha and David Gow.
- Miscellaneous documentation warn fix"
* tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTS
fs: ext4: default KUNIT_* fragments to KUNIT_ALL_TESTS
drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTS
lib: Kconfig.debug: default KUNIT_* fragments to KUNIT_ALL_TESTS
kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS
kunit: Kconfig: enable a KUNIT_ALL_TESTS fragment
kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig
kunit: use KUnit defconfig by default
kunit: use --build_dir=.kunit as default
Documentation: test.h - fix warnings
kunit: kunit_tool: Separate out config/build/exec/parse
This Kselftest update for Linux 5.8-rc1 consists of:
- Several fixes from Masami Hiramatsu to improve coverage for
lib and sysctl tests.
- Clean up to vdso test and a new test for getcpu() from Mark Brown.
- Add new gen_tar selftests Makefile target generate selftest package
running "make gen_tar" in selftests directory from Veronika Kabatova.
- Other miscellaneous fixes to timens, exec, tpm2 tests.
-----BEGIN PGP SIGNATURE-----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=IB5c
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This consists of:
- Several fixes from Masami Hiramatsu to improve coverage for lib and
sysctl tests.
- Clean up to vdso test and a new test for getcpu() from Mark Brown.
- Add new gen_tar selftests Makefile target generate selftest package
running "make gen_tar" in selftests directory from Veronika
Kabatova.
- Other miscellaneous fixes to timens, exec, tpm2 tests"
* tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sysctl: Make sysctl test driver as a module
selftests/sysctl: Fix to load test_sysctl module
lib: Make test_sysctl initialized as module
lib: Make prime number generator independently selectable
selftests/ftrace: Return unsupported if no error_log file
selftests/ftrace: Use printf for backslash included command
selftests/timens: handle a case when alarm clocks are not supported
Kernel selftests: Add check if TPM devices are supported
selftests: vdso: Add a selftest for vDSO getcpu()
selftests: vdso: Use a header file to prototype parse_vdso API
selftests: vdso: Rename vdso_test to vdso_test_gettimeofday
selftests/exec: Verify execve of non-regular files fail
selftests: introduce gen_tar Makefile target
Patch series "Add log level to show_stack()", v3.
Add log level argument to show_stack().
Done in three stages:
1. Introducing show_stack_loglvl() for every architecture
2. Migrating old users with an explicit log level
3. Renaming show_stack_loglvl() into show_stack()
Justification:
- It's a design mistake to move a business-logic decision into platform
realization detail.
- I have currently two patches sets that would benefit from this work:
Removing console_loglevel jumps in sysrq driver [1] Hung task warning
before panic [2] - suggested by Tetsuo (but he probably didn't realise
what it would involve).
- While doing (1), (2) the backtraces were adjusted to headers and other
messages for each situation - so there won't be a situation when the
backtrace is printed, but the headers are missing because they have
lesser log level (or the reverse).
- As the result in (2) plays with console_loglevel for kdb are removed.
The least important for upstream, but maybe still worth to note that every
company I've worked in so far had an off-list patch to print backtrace
with the needed log level (but only for the architecture they cared
about). If you have other ideas how you will benefit from show_stack()
with a log level - please, reply to this cover letter.
See also discussion on v1:
https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/
This patch (of 50):
print_ip_sym() needs to have a log level parameter to comply with other
parts being printed. Otherwise, half of the expected backtrace would be
printed and other may be missing with some logging level.
The following callee(s) are using now the adjusted log level:
- microblaze/unwind: the same level as headers & userspace unwind.
Note that pr_debug()'s there are for debugging the unwinder itself.
- nds32/traps: symbol addresses are printed with the same log level
as backtrace headers.
- lockdep: ip for locking issues is printed with the same log level
as other part of the warning.
- sched: ip where preemption was disabled is printed as error like
the rest part of the message.
- ftrace: bug reports are now consistent in the log level being used.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arrays are pointer types and don't need their address taking.
Fixes: 8255718f4b (perf pmu: Expand PMU events by prefix match)
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200609053610.206588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If config->aggr_map is NULL and config->aggr_get_id is not NULL,
the function print_aggr() will still calling arrg_update_shadow(),
which can result in accessing the invalid pointer.
Fixes: 088519f318 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/lkml/20200608163625.GC3073@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'evname' variable can be NULL, as it is checked a few lines back,
check it before using.
Fixes: 9e207ddfa2 ("perf report: Show call graph from reference events")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
To pick the changes in:
f97f5a56f5 ("x86/kvm/hyper-v: Add support for synthetic debugger interface")
850448f35a ("KVM: nVMX: Fix VMX preemption timer migration")
2c4c413255 ("KVM: x86: Print symbolic names of VMX VM-Exit flags in traces")
cc440cdad5 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE")
f7d31e6536 ("x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit")
72de5fa4c1 ("KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT")
acd05785e4 ("kvm: add capability for halt polling")
3ecad8c2c1 ("docs: fix broken references for ReST files that moved around")
That do not result in any change in tooling, as the additions are not
being used in any table generator.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jon Doron <arilou@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Shier <pshier@google.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
4ef10fe05b ("drm/i915/perf: add new open param to configure polling of OA buffer")
11ecbdddf2 ("drm/i915/perf: introduce global sseu pinning")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
e3b1078bed ("fscrypt: add support for IV_INO_LBLK_32 policies")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
