Currently unloading bochs_drm (after unbinding the vtconsole) results in
a warning about a leaked connector:
[drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked!
While investigating a potential fix I noticed that a lot of open-coded
functionality is already implemented elsewhere, so start converting it:
bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl).
bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding
"struct drm_framebuffer" from "struct bochs_framebuffer".
Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create
which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c.
For this to work, the GEM object is moved into "drm_framebuffer". After
that, "bochs_framebuffer" is no longer needed and therefore removed.
Remove the unused "size" and "initialized" fields from fb, the latter is
not necessary as drm_fb_helper_fbdev_teardown can be called even if
bochsfb_create fails. This theory was tested by returning early and
late (just before drm_gem_fbdev_fb_create). Both scenarios fail
gracefully although the latter seems to leak the object from
bochsfb_create_object (not a regression).
Guess on the reason for the encoder leak: drm_framebuffer_cleanup was
previously used, but did not destroy much. drm_fb_helper_fbdev_teardown
is now used and calls drm_framebuffer_remove which does a bit more work.
Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm'
and also with Xorg + fbdev (startx -> xterm). The latter triggered a
warning in ttm_bo_vm_open that existed before, see
https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-3-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make
the drm_mode_addfb() compat code work correctly on bigendian machines.
If they don't they interpret pixel_format values incorrectly for bug
compatibility, which in turn implies the ADDFB2 ioctl does not work
correctly then. So block it to make userspace fallback to ADDFB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180907073213.20410-1-kraxel@redhat.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/virtio/virtgpu_display.c: In function 'virtio_gpu_framebuffer_init':
drivers/gpu/drm/virtio/virtgpu_display.c:78:28: warning:
variable 'bo' set but not used [-Wunused-but-set-variable]
struct virtio_gpu_object *bo;
^
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1536285837-150460-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This leaves all the commit/check and state handling in drm_atomic.c,
while pulling all the uapi glue and the huge ioctl itself into a
seprate file.
This seems to almost perfectly split the rather big drm_atomic.c file
into 2 equal sizes.
Also adjust the kerneldoc and type a very terse overview text.
v2: Rebase.
v3: Fix tiny typo.
v4:
- Fixup armada, newly converted atomic driver hooray!
- Fixup msm/dpu1, newly added too.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really
shouldn't ever be used by drivers directly.
Unfortunately this means we need to move the set_writeback_fb function
around to avoid a forward decl.
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-5-daniel.vetter@ffwll.ch
Only needed minimal changes in drm_internal.h (for the drm_ioctl_t
type and a few forward declarations), plus a few missing includes in
drm_connector.c.
Yay, the last stage of the drm header cleanup can finally commence!
v2: Compiles now, with drm/drm_util.h extracted.
v3: Fix up commit message (Sam Ravnborg)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-2-daniel.vetter@ffwll.ch
We have a bunch of neat little macros all over the place which should
move to kernel.h. But some of them died in bikesheds on lkml, and we
need a decent home for them.
Start out by moving the for_each_if macro there.
v2: Rename to drm_util.h instead (Dave&Sean)
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
The hardware supports dithering on TCON channel 0 which is used for LCD
panels.
Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
Dithering is only supported for TCON channel 0. Throughout the datasheet
all the names associated with these register are prefixed "TCON0",
instead of "TCON". The only exception is the control register
"TCON_FRM_CTL_REG".
Rename the macros to reflect this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-3-wens@csie.org
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.
The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.
Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-2-wens@csie.org
Big amount of changes from Laurent, reworking the driver towards the
model used by the other DRM drivers by reverting the direction of many
of the operations on the display pipeline. The aim of this work is to
allow omapdrm to use the common DRM panels and bridges. Not all of the
operations are dealt in these patches, so more work needs to be done.
The only change visible to the user should be the change in module
dependencies: e.g. earlier a panel module depended on an encoder module,
but now the encoder module depends on the panel module, which affects
the order in which to unload the modules.
-----BEGIN PGP SIGNATURE-----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=8425
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.20
Big amount of changes from Laurent, reworking the driver towards the
model used by the other DRM drivers by reverting the direction of many
of the operations on the display pipeline. The aim of this work is to
allow omapdrm to use the common DRM panels and bridges. Not all of the
operations are dealt in these patches, so more work needs to be done.
The only change visible to the user should be the change in module
dependencies: e.g. earlier a panel module depended on an encoder module,
but now the encoder module depends on the panel module, which affects
the order in which to unload the modules.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9bb1a01b-a632-ce0c-f249-7b5470967e3a@ti.com
we can place a fence to a timeline point after expanded.
v2: change func parameter order
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246543/
we can fetch timeline point fence after expanded.
v2: The parameter fence is the result of the function and should come last.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246541/
moved to front of file.
stub fence will be used by timeline syncobj as well.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246539/
That is certainly totally nonsense. dma_fence_enable_sw_signaling()
is the function who is calling this callback.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246535/
Since this is handling user provided bpp and depth, we need to sanity
check and propagate the EINVAL back rather than assume what the insane
client intended and fill the logs with DRM_ERROR.
v2: Check both bpp and depth match the builtin pixel format, and
introduce a canonical DRM_FORMAT_INVALID to reserve 0 against any future
fourcc.
v3: Mark up DRM_FORMAT_C8 as being {bpp:8, depth:8}
Testcase: igt/kms_addfb_basic/legacy-format
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905153116.28924-1-chris@chris-wilson.co.uk
Userspace on big endian machhines typically expects the ADDFB ioctl
returns a big endian framebuffer. drm_mode_addfb() will call
drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_*
values though, which is wrong. This patch fixes that.
Drivers (both kernel and xorg) have quirks in place to deal with the
broken drm_mode_addfb() behavior. Because of this we can't just change
drm_mode_addfb() behavior for everybody without breaking things. Add
the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers
can opt-in.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-5-kraxel@redhat.com
framebuffer_check() expects that drm_get_format_info() will not fail if
the __drm_format_info() call was successful. That'll work only in case
both are called with the same pixel_format value, so masking out the
DRM_FORMAT_BIG_ENDIAN flag isn't a good idea.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-4-kraxel@redhat.com
Introduce a complementary function to i915_driver_create() to undo all
that is created.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905140921.17467-2-chris@chris-wilson.co.uk
The newly added internal rgb encoder for Rockchip vops is missing
stubs for the case that the rgb output part is not enabled in the
kernel config. So add these.
Fixes: 1f0f015151 (drm/rockchip: Add support for Rockchip Soc RGB output interface)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul fixed up checkpatch nits]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905191302.26023-1-heiko@sntech.de
crtc_state is accessed by both vblank_handle() and the ordered
work_struct handle vkms_crc_work_handle() to retrieve and or update
the frame number for computed CRC.
Since work_struct can fail, add frame_end to account for missing frame
numbers.
Use (frame_[start/end]) for synchronization between hrtimer callback
and ordered work_struct handle.
This patch passes the following subtests from igt kms_pipe_crc_basic test:
bad-source, read-crc-pipe-A, read-crc-pipe-A-frame-sequence,
nonblocking-crc-pipe-A, nonblocking-crc-pipe-A-frame-sequence
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903211743.GA2773@haneenDRM
Future gen reduce the number of bits we will have available to
differentiate between contexts, so reduce the lifetime of the ID
assignment from that of the context to its current active cycle (i.e.
only while it is pinned for use by the HW, will it have a constant ID).
This means that instead of a max of 2k allocated contexts (worst case
before fun with bit twiddling), we instead have a limit of 2k in flight
contexts (minus a few that have been pinned by the kernel or by perf).
To reduce the number of contexts id we require, we allocate a context id
on first and mark it as pinned for as long as the GEM context itself is,
that is we keep it pinned it while active on each engine. If we exhaust
our context id space, then we try to reclaim an id from an idle context.
In the extreme case where all context ids are pinned by active contexts,
we force the system to idle in order to recover ids.
We cannot reduce the scope of an HW-ID to an engine (allowing the same
gem_context to have different ids on each engine) as in the future we
will need to preassign an id before we know which engine the
context is being executed on.
v2: Improved commentary (Tvrtko) [I tried at least]
References: https://bugs.freedesktop.org/show_bug.cgi?id=107788
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
The rk3188 has 2 vops not using iommus which only output directly
to a rgb interface per vop. So all other output modes like hdmi
are provided by external brige chips.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830110937.1739-1-heiko@sntech.de
Some Rockchip CRTCs, like rv1108 and px30, can directly output parallel
and serial RGB data to panel or conversion chip.
So add a feature-bit for vops to mark the ability for these direct
outputs and add an internal encoder in that case, that can attach to
bridge chipsor panels.
Changes in v7:
1. forget to delete rockchip_rgb_driver and delete it.
Changes in v6:
1. Update according to Heiko Stuebner' implemention, rgb output is
part of vop's feature, should not register as a independent
driver.
Changes in v5:
1. add SPDX-License-Identifier tag
Changes in v4:
1. add support px30;
Changes in v3:
1. update for rgb-mode move to panel node.
Changes in v2:
1. add error log when probe failed;
2. update name_to_output_mode() according to sean's suggest;
3. Fix uninitialized use of ret.
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-3-heiko@sntech.de
To be able to have both internal subdrivers and external bridge
drivers as output endpoints of vops, add a function to be able
to distinguish these.
changes in v8:
- improved function documentation
- better error handling
- put calls for node and pdev references
changes in v6:
- added function to check subdriver vs. bridge
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830211207.10480-2-heiko@sntech.de
Some boards have HDMI VCC pin connected to voltage regulator which may
not be turned on by default.
Add support for such boards by adding voltage regulator handling code to
HDMI driver.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Icenowy: change supply name to "hvcc"]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-11-icenowy@aosc.io
Display Engine(DE2) in Allwinner A64 has two mixers and tcons.
The routing for mixer0 is through tcon0 and connected to
LVDS/RGB/MIPI-DSI controller.
The routing for mixer1 is through tcon1 and connected to HDMI.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-6-icenowy@aosc.io
Mixers in Allwinner have similar capabilities as others SoCs with DE2.
Add support for them.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: Add mixer1]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904044053.15425-5-icenowy@aosc.io
The new function balances virtio_gpu_object_attach().
Also make virtio_gpu_cmd_resource_inval_backing() static and switch
call sites to the new virtio_gpu_object_attach() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180829122026.27012-2-kraxel@redhat.com
Track whenever an virtual output (crtc) is enabled or disabled.
On atomic updates check for both framebuffer being present and crtc
being enabled to figure whenever the output is active or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180813152855.12863-1-kraxel@redhat.com
"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.
Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:
spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0
This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the previous modeset commit has completed and is no longer part of
the crtc state, skip waiting for it.
Ville pointed out that, in fact, the commit is never removed after a
modeset so the only way we could see a NULL here should be if there was
never a commit attached. Nevertheless, we have the evidence it can be
NULL and it has been defended against elsewhere, for example commit
93313538c1 ("drm/i915: Pass idle crtc_state to intel_dp_sink_crc").
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107792
Fixes: c44301fce6 ("drm/i915: Allow control of PSR at runtime through debugfs, v6")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904162902.2578-1-chris@chris-wilson.co.uk
Using a spinlock to serialize the destroy function, within the destroy
function itself does not prevent the buggy driver from shooting
themselves in the foot - either way they still have a use-after-free
issue.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903093155.3825-1-chris@chris-wilson.co.uk
The ioctl arguments are under control of the user and as such we should
resist any temptation to flood the kernel logs with their errors.
Relegate the DRM_ERROR to a DRM_DEBUG so the user has to opt into
hearing of their own mistakes. (One day we will have a small ringbuffer
attached to the task, so that the concerned process can inspect its own
debug info for EINVAL without them being hitting syslog at all.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904115719.24525-1-chris@chris-wilson.co.uk
Elsewhere we manipulate uncore.unclaimed_mmio_check and
i915_param.mmio_debug under the irq lock (e.g. preserving the current
value across a user forcewake grab), but do not protect the manipulation
inside intel_uncore_arm_unclaimed_mmio_detection() from concurrent
access, even from itself. This is an issue as we do call
arm_unclaimed_mmio_detection from multiple threads without coordination.
Suggested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intelcom>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904131207.17563-1-chris@chris-wilson.co.uk
There are two issues with the current RPCS programming for Icelake:
Expansion of the slice count bitfield has been missed, as well as the
required programming workaround for the subslice count bitfield size
limitation.
1)
Bitfield width for configuring the active slice count has grown so we need
to program the GEN8_R_PWR_CLK_STATE accordingly.
Current code was always requesting eight times the number of slices (due
writing to a bitfield starting three bits higher than it should). These
requests were luckily a) capped by the hardware to the available number of
slices, and b) we haven't yet exported the code to ask for reduced slice
configurations.
Due both of the above there was no impact from this incorrect programming
but we should still fix it.
2)
Due subslice count bitfield being only three bits wide and furthermore
capped to a maximum documented value of four, special programming
workaround is needed to enable more than four subslices.
With this programming driver has to consider the GT configuration as
2x4x8, while the hardware internally translates this to 1x8x8.
A limitation stemming from this is that either a subslice count between
one and four can be selected, or a subslice count equaling the total
number of subslices in all selected slices. In other words, odd subslice
counts greater than four are impossible, as are odd subslice counts
greater than a single slice subslice count.
This also had no impact in the current code base due breakage from 1)
always reqesting more than one slice.
While fixing this we also add some asserts to flag up any future bitfield
overflows.
v2:
* Use a local in all branches for clarity. (Lionel)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bspec: 12247
Reported-by: tony.ye@intel.com
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: tony.ye@intel.com
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903113007.2643-1-tvrtko.ursulin@linux.intel.com
Continuing the fun of trying to find exactly the delay that is
sufficient to ensure that the page directory is fully loaded between
context switches, move the extra flush added in commit 70b73f9ac1
("drm/i915/ringbuffer: Delay after invalidating gen6+ xcs") to just
after we flush the pd. Entirely based on the empirical data of running
failing tests in a loop until we survive a day (before the mtbf is 10-30
minutes).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107769
References: 70b73f9ac1 ("drm/i915/ringbuffer: Delay after invalidating gen6+ xcs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904063802.13880-1-chris@chris-wilson.co.uk
Currently, if the user has enabled mmio-debug around each register
access, we presume that we have then checked them all. However, it is
still possible through omission (raw register access) or external
interaction that the unclaimed access was not highlighted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904111732.24266-1-chris@chris-wilson.co.uk
Older gen use a physical address for the hardware status page, for which
we use cache-coherent writes. As the writes are into the cpu cache, we use
a normal WB mapped page to read the HWS, used for our seqno tracking.
Anecdotally, I observed lost breadcrumbs writes into the HWS on i965gm,
which so far have not reoccurred with this patch. How reliable that
evidence is remains to be seen.
v2: Explicitly pass the expected physical address to the hw
v3: Also remember the wild writes we once had for HWS above 4G.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903152304.31589-2-chris@chris-wilson.co.uk
We currently assert that if the target is in a CPU write domain, we use
a CPU reloc path rather than the GPU reloc path. However, we have a debug
override to force the GPU path and that unfortunately hits the assert.
Include the async clflush under the debug option to ensure correct
behaviour even when debugging, and strict when not.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903150216.19965-1-chris@chris-wilson.co.uk
Instead of calling the .set_timings() operation recursively from the
display device backwards, iterate over the devices manually in the DRM
encoder code. This moves the complexity to a single central location and
simplifies the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The video timings are stored in the CRTC structure by the
omap_crtc_dss_set_timings() function, called by dss_mgr_set_timings()
from the .enable() operation of the internal encoders. This instead
belongs to the .set_timings() code paths. Move the
omap_crtc_dss_set_timings() calls accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The VENC encoder modifies the requested video mode to match the NTSC or
PAL timings (or reject the video mode completely) in the .set_timings()
operation. This should be performed in the .check_timings() operation
instead. Move the fixup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The SDI encoder modifies the pixel clock of the requested video mode to
take the limitations of the PLL into account in the .enable() operation.
This should be performed in the .check_timings() operation instead. Move
the fixup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Constify many pointers to struct videomode, as well as pointers to
container structures, to ensure the video mode isn't modified after
the .check_timings() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DSI encoder modifies the passed videomode to take the requirements
of the internal DISPC-DSI bus into account in the .enable_video_output()
operation. This should be performed in the .check_timings() operation
instead. There is however no .check_timings() operation as the DSI
encoder uses a custom API, so move it to the closest match which is the
.set_config() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The video mode is aleady fixed up by the .check_timings() operation,
there's no need to repeat that when enabling the DPI output.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of call the dispc timings check function dispc_mgr_timings_ok()
from the internal encoders .check_timings() operation, expose it through
the dispc ops (after renaming it to check_timings) and call it directly
from omapdrm. This allows removal of now empty omap_dss_device
.check_timings() operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The encoder enable operation currently performs mode fixup and mode
setting for all omap_dss_device instances in the display pipeline. There
are dedicated encoder operations for those operations (respectively
.atomic_check() and .mode_set()), but they are not used for this
purpose.
Move the mode fixup code to .atomic_check() and the mode set code
.mode_set() to better fit the KMS model. The bus flags fixup has to
happen at .mode_set() time as there is no place to store the bus flags
in the atomic state structures. This could be solved by extending one of
the state structures, but as the goal is to replace the fixup by direct
usage of bus flags through the driver, that would be pointless.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The bus flags stored in omap_dss_device instances are used to fixup the
video mode before setting it, to honour constraints that can't be
expressed through drm_display_mode. The fixup occurs in the CRTC mode
set operation and the resulting video mode is stored internally in the
CRTC. It is then used next by omap_encoder_enable() to apply mode fixups
for the omap_dss_device instances in omap_encoder_update().
Move the hack to the omap_encoder_update() function right before
applying the omap_dss_device fixups, in order to group all fixups
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Panels drivers store their timings in a device data structure field that
is initialized at probe time, either from hardcoded values or from
firmware-supplied values. Those timings are then reported through the
.get_timings() operation to construct the panel display mode.
The panel timings are further modified by the .set_timings() operation,
which is called with the timings retrieved by .get_timings(), and
mangled by .check_timings(). The latter potentially adjusts the pixel
clock only.
Conceptually, modifying the panel timings is wrong, as the timings are
an intrinsic property of the panel and should thus be fixed.
Furthermore, modifying them this way at runtime can result in display
modes reported to userspace varying between calls, which is also wrong.
There's no actual need to store the mangled pixel clock value in the
timings. Don't modify the panel timings in the .set_timings() operation,
just forward it to the previous device in the display pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The analog TV, DVI and HDMI connectors all report timing information
through the .get_timings() information.
For analog TV outputs the information is queried from the encoder, so
the operation is unused. Remove it.
For HDMI outputs the display pipeline provides EDID capability, so the
operation is unused as well. Remove it.
For DVI outputs the operation is also unused if the pipeline provides
EDID capability. Otherwise (when the DDC bus is not connected) we
shouldn't hardcode a single mode, but instead report no mode and let the
KMS core add default modes. This is achieved by removing the operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Timings for the TV output are currently reported by the analog TV
connector. This has the disadvantage of having to handle timing-related
operations in a connector omap_dss_device that has, at the hardware
level, no knowledge of any timing information.
Implement the .get_timings() operation in the venc driver, and get
timings from the first component in the pipeline that implements the
operatation. This switches the duty of reporting analog TV timings from
the connector to the encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .check_timings() operation is called recursively from the display
device back to the output device. Most components just forward the
operation to the previous component in the chain, resulting in lots of
duplicated pass-through functions. To avoid that, iterate over the
components manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Source components in the display pipeline need to configure their output
signals polarities and clock driving edge based on the requirements of
the sink component.
Those requirements are currently shared across the whole pipeline in the
flags of a videomode structure, instead of being local to each bus. This
both prevents multiple buses from having different configurations (when
the hardware supports it), and makes it difficult to move from videomode
to drm_display_mode as the latter doesn't contain bus polarities and
clock edge flags.
Add a bus_flags field to the omap_dss_device structure and move the
DISPLAY_FLAGS_DE_(LOW|HIGH), DISPLAY_FLAGS_PIXDATA_(POS|NEG)EDGE and
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE videomode flags to bus_flags in all
external encoders, connectors and panels. The videomode flags are still
used internally for internal encoders, this will be addressed in a
second step.
The related videomode flags in the default mode of the DVI connector can
simply be dropped, as they are always overridden by the TFP410 driver.
Note that this results in both the DISPLAY_FLAGS_SYNC_POSEDGE and
DISPLAY_FLAGS_SYNC_NEGEDGE flags being set, which is invalid, but only
the former is tested for when programming the DISPC, so the DVI
connector flags are effectively overridden by the TFP410 flags.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device .set_timings() operation for external encoders
stores the video mode in the device data structure. That mode is then
never used again. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .check_timings() operation is present in all panels and connectors.
The fallback that uses .get_timings() in the absence of .check_timings()
is thus unneeded.
While it could be argued that the fallback implements a useful check
that should be extended to cover all fixed-resolution panels, the code
is currently unused and gets in the way of the ongoing refactoring.
Remove it, a similar feature can always be added later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device .set_timings() operations are called directly from
omap_encoder_update(), and indirectly from the omap_dss_device .enable()
operation. The latter is called from omap_encoder_enable(), right after
calling omap_encoder_update(). The .set_timings() operation it thus
called twice in a row. Fix it by removing the indirect call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The .set_timings() operations of the omap_dss_device instances don't
need to modify the passed timings. Make the pointer const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Both the .check_timings() and .set_timings() handlers call
tfp410_fix_timings() to fix the timing's flags. As .check_timings() is
always called before .set_timings(), there's no need to fix the flags
twice. Remove the tfp410_fix_timings() call from .set_timings().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The two functions implement the .set_timings() and .check_timings()
operations. Rename them to hdmi_disply_set_timings() and
hdmi_display_check_timings() respectively to match the operations names
and make searching the source code easier.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of determining the connector type from the type of the display's
omap_dss_device and passing it to the omap_connector_init() function,
move the type determination code to omap_connector.c and remove the type
argument to the connector init function. This moves code to a more
natural location, making the driver easier to read.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The drm_connector implementation requires access to the omap_dss_device
corresponding to the display, which is passed to its initialization
function and stored internally. Refactoring of the timings operations
will require access to the output omap_dss_device. To prepare for that,
pass it to the connector initialization function and store it internally
as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HDMI mode (.set_hdmi_mode()) and infoframe (.set_infoframe())
operations are called recursively from the display device back to the
HDMI encoder. This isn't required, as all components other than the HDMI
encoder just forward the operation to the previous component in the
chain. Call the operations directly on the HDMI encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The drm_encoder implementation requires access to the omap_dss_device
corresponding to the display, which is passed to its initialization
function and stored internally. Clean up of the HDMI mode and infoframe
handling will require access to the output omap_dss_device. To prepare
for that, pass it to the encoder initialization function and store it
internally as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The CRTC mode set implementation needs to access the omap_dss_device for
the pipeline display. To do so, it iterates over all pipelines to find
the one that contains an encoder corresponding to the CRTC, and request
the display device from the encoder. That's a very complicated dance
when the CRTC has a direct pipeline pointer already, and the pipeline
contains a pointer to the display device.
Replace the convoluted code with direct access.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the EDID read operation (.read_edid()) recursively
from the display device back to the first device that provides EDID read
support, iterate over the devices manually in the DRM connector code.
This moves the complexity to a single central location and simplifies
the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
On HDMI outputs, CEC support requires notification of HPD signal
deassertion. The HPD signal can be handled by various omap_dss_device
instances in the pipeline, and all of them forward HPD events to the
OMAP4 internal HDMI encoder.
Knowledge of the DSS internals need to be removed from the
omap_dss_device instances in order to migrate to drm_bridge. To do so,
move HPD handling for CEC to the omap_connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_dss_device .enable_hpd() and .disable_hpd() are used to enable
and disable hot-plug detection at omapdrm probe and remove time. This is
required to avoid reporting hot-plug detection events before the DRM
infrastructure is ready to accept them, as that could result in crashes
or other malfunction.
Hot-plug event reporting is conditioned by both HPD being enabled
through the .enable_hpd() operation and by the HPD callback being
registered though the .register_hpd_cb() operation. We thus don't need a
separate enable operation if we can guarantee that callbacks won't be
registered too early.
HPD callbacks are registered at connector initialization time, which is
too early to start reporting HPD events. There's however nothing
blocking a move of callback registration to a later time when the
omapdrm driver calls the HPD enable operations. Do so, and remove the
HPD enable operation completely from omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The HPD-related omap_dss_device operations are now only called when the
device supports HPD. There's no need to duplicate that check in the
omap_dss_device drivers. The .register_hpd_cb() operation can as a
result be turned into a void operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the hot-plug detection callback registration
operations (.register_hpd_cb() and .unregister_hpd_cb()) recursively
from the display device back to the first device that provides hot plug
detection support, iterate over the devices manually in the DRM
connector code. This moves the complexity to a single central location
and simplifies the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of calling the .detect() operation recursively from the display
device back to the first device that provides hot plug detection
support, iterate over the devices manually in the DRM connector
.detect() implementation. This moves the complexity to a single central
location and simplifies the logic in omap_dss_device drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When an omap_dss_device operation can be implemented in multiple places
in a chain of devices, it is important to find out which device to
address to perfom the operation. This is currently done by calling the
operation on the display device at the end of the chain, and recursively
delagating the operation to the previous device if it can't be performed
locally. The drawback of this approach is an increased complexity in
omap_dss_device drivers.
In order to simplify the drivers, we will switch from a recursive model
to an interative model, centralizing the complexity in a single
location. This requires knowing which operations an omap_dss_device
supports at runtime. We can already test which operations are
implemented by checking the operation pointer, but implemented
operations can require resources whose availability varies between
systems. For instance a hot-plug signal from a connector can be wired to
a GPIO or to a bridge chip.
Add operation flags that can be set in the omap_dss_device structure by
drivers to signal support for operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_dss_device instances have two ops structures, omap_dss_driver and
omap_dss_device_ops. The former is used for devices at the end of the
pipeline (a.k.a. display devices), and the latter for intermediate
devices.
Having two sets of operations isn't convenient as code that iterates
over omap_dss_device instances need to take them both into account.
There's currently a reasonably small amount of such code, but more will
be introduced to move the driver away from recursive operations. To
simplify current and future code, move all operations that are not
specific to the display device to the omap_dss_device_ops.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.
As the descriptor API handles the active-low flag internally we need to
invert the polarity of all GPIO operations in the driver. Rename the
nreset_gpio field to reset_gpio to reflect that.
The reset GPIO is mandatory, so drop conditional tests through the
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
