The opening comment mark "/**" is reserved for kernel-doc comments, so
it will generate warnings for comments that are not kernel-doc with
"make W=1". For example,
drivers/gpu/drm/drm_memory.c:2: warning: Cannot understand * \file
drm_memory.c
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1563198173-7317-1-git-send-email-cai@lca.pw
This should be more future-proof if we ever encounter a device with two
of these bridges.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190706203105.7810-1-robdclark@gmail.com
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a break from the middle of the loop there is
no put, thus causing a memory leak. Hence add an of_node_put before the
break.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190706132742.3250-1-nishkadg.linux@gmail.com
Drop use of the deprecated header drmP.h.
Make header file self-contained, with only the required set
of include files.
And fixed fallout in remaining files.
Divide include files in blocks and sort them within each block.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-15-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Fix fallout.
v2:
- Add additional include/forward to shmob_drm_crtc.h
to avoid relying on indirect includes (Laurent)
- Add additional includes to shmob_drm_regs.h to make
it self-contained
- Add additional includes to shmob_drm_plane.h to make
it self-contained
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-renesas-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190715090227.GA27652@ravnborg.org
Drop use of the deprecated drmP.h header file.
While touching the files divide include files in blocks
and sort the include files in the individual blocks.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-33-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Made bochs.h self-contained and then fixed
fallout in remaining files.
Several unused includes was dropped in the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-32-sam@ravnborg.org
The macro DRM_VRAM_MM_FILE_OPERATIONS referencs
functions declared in other header files.
Include these header files so this header files
pulls in what it references.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-31-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-26-sam@ravnborg.org
Drop use of the deprecated drmP.h header.
Replace it with the necessary includes in the individual .c files.
The header files was self-contained, and extra includes were not added
there.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-13-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
While touching the list of include files divided them
in blocks and sort them within each block.
Fixed fallout in the relevant files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Marek Vasut <marex@denx.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-6-sam@ravnborg.org
Drop use of the deprecated header drmP.h.
Fix so header file became self-contained,
and then fixed fallout in the other files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-5-sam@ravnborg.org
Since kmalloc() will round up the allocation to the next slab size or
page, it will normally return a pointer to a memory block bigger than we
asked for. We can query for the actual size of the allocated block using
ksize() and expand our variable size reservation_list to take advantage
of that extra space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712080314.21018-1-chris@chris-wilson.co.uk
A buffer is created in response to the user ioctl, it should therefore
be a plain DRM_DEBUG() message to reflect it being a user invoked
response and not a driver construct.
This is just to make the commonplace drm.debug=[26e] quieter when
running with vgem.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712120147.29830-1-chris@chris-wilson.co.uk
The horizontal blanking periods are too short, as the values are
specified for a single LVDS channel. Since this panel is dual LVDS
they need to be doubled. With this change the panel reaches its
nominal vrefresh rate of 60Fps, instead of the 64Fps with the
current wrong blanking.
Philipp Zabel added:
The datasheet specifies 960 active clocks + 40/128/160 clocks blanking
on each of the two LVDS channels (min/typical/max), so doubled this is
now correct.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1562764060.23869.12.camel@pengutronix.de
This bit enables replication logic to expand an RGB color less than 24
bits, to 24 bits, which is used internally for all formats. Otherwise,
the least significant bits are always set to zero and the color may not
be what is expected.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1562686509-8747-1-git-send-email-joshua.henderson@microchip.com
Convert the AUO b101ean01 from using a fixed mode to specifying a
display timing with min/typ/max values.
The AUO b101ean01's datasheet says:
* Vertical blanking min is 12
* Horizontal blanking min is 60
* Pixel clock is between 65.3 MHz and 75 MHz
The goal here is to be able to specify the proper timing in device
tree to use on rk3288-veyron-minnie to match what the downstream
kernel is using so that it can used the fixed PLL.
Changes in v4:
- display_timing for AUO b101ean01 new for v4.
Changes in v6:
- Rebased to drm-misc next
- Added tags
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-4-dianders@chromium.org
Convert the Innolux n116bge from using a fixed mode to specifying a
display timing with min/typ/max values.
Note that the n116bge's datasheet doesn't fit too well into DRM's way
of specifying things. Specifically the panel's datasheet just
specifies the vertical blanking period and horizontal blanking period
and doesn't break things out. For now we'll leave everything as a
fixed value but just allow adjusting the pixel clock. I've added a
comment on what the datasheet claims so someone could later expand
things to fit their needs if they wanted to test other blanking
periods.
The goal here is to be able to specify the panel timings in the device
tree for several rk3288 Chromebooks (like rk3288-veryon-jerry). These
Chromebooks have all been running in the downstream kernel with the
standard porches and sync lengths but just with a slightly slower
pixel clock because the 76.42 MHz clock is not achievable from the
fixed PLL that was available. These Chromebooks only achieve a
refresh rate of ~58 Hz. While it's probable that we could adjust the
timings to achieve 60 Hz it's probably wisest to match what's been
running on these devices all these years.
I'll note that though the upstream kernel has always tried to achieve
76.42 MHz, it has actually been running at 74.25 MHz also since the
video processor is parented off the same fixed PLL.
Changes in v4:
- display_timing for Innolux n116bge new for v4.
Changes in v5:
- Added Heiko's Tested-by
Changes in v6:
- Rebased to drm-misc next
- Added tags
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-3-dianders@chromium.org
This patch adds the ability to override the typical display timing for a
given panel. This is useful for devices which have timing constraints
that do not apply across the entire display driver (eg: to avoid
crosstalk between panel and digitizer on certain laptops). The rules are
as follows:
- panel must not specify fixed mode (since the override mode will
either be the same as the fixed mode, or we'll be unable to
check the bounds of the overried)
- panel must specify at least one display_timing range which will be
used to ensure the override mode fits within its bounds
Changes in v2:
- Parse the full display-timings node (using the native-mode) (Rob)
Changes in v3:
- No longer parse display-timings subnode, use panel-timing (Rob)
Changes in v4:
- Don't add mode from timing if override was specified (Thierry)
- Add warning if timing and fixed mode was specified (Thierry)
- Don't add fixed mode if timing was specified (Thierry)
- Refactor/rename a bit to avoid extra indentation from "if" tests
- i should be unsigned (Thierry)
- Add annoying WARN_ONs for some cases (Thierry)
- Simplify 'No display_timing found' handling (Thierry)
- Rename to panel_simple_parse_override_mode() (Thierry)
Changes in v5:
- Added Heiko's Tested-by
Changes in v6:
- Rebased to drm-misc next
- Added tags
Cc: Doug Anderson <dianders@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711203455.125667-2-dianders@chromium.org
When vkms invoke drm_universal_plane_init(), it sets 0 for
possible_crtcs parameter which means that planes can't be attached to
any CRTC. It currently works due to some safeguard in the drm_crtc file;
however, it is possible to identify the problem by trying to append a
second connector. This patch fixes this issue by modifying
vkms_plane_init() to accept an index parameter which makes the code a
little bit more flexible and avoid set zero to possible_crtcs.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d67849c62a8d8ace1a0af455998b588798a4c45f.1561491964.git.rodrigosiqueiramelo@gmail.com
Only dynamic mode objects, i.e. those which are refcounted and have a free
callback, can be added while the overall drm_device is visible to
userspace. All others must be added before drm_dev_register and
removed after drm_dev_unregister.
Small issue around drivers still using the load/unload callbacks, we
need to make sure we set dev->registered so that load/unload code in
these callbacks doesn't trigger false warnings. Only a small
adjustement in drm_dev_register was needed.
Motivated by some irc discussions about object ids of dynamic objects
like blobs become invalid, and me going on a bit an audit spree.
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614061723.1173-1-daniel.vetter@ffwll.ch
The function drm_client_close is declared as static and marked as
EXPORT_SYMBOL. It's a bit confusing for an internal function to be
exported. The area of visibility for such function is its .c file
and all other modules. Other *.c files of the same module can't use it,
despite all other modules can. Relying on the fact that this is the
internal function and it's not a crucial part of the API, the patch
removes the EXPORT_SYMBOL marking of drm_client_close.
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703170150.32548-1-efremov@linux.com
This patch replaces mgag200's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.
The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
mga_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.
For consistency, this patch also changes the preferred framebuffer depth.
The original code used 24 bpp by default and 32 bpp for the framebuffer. As
24 bpp is not well supported by userspace anyway, setting 32 bpp as default
makes sense.
v2:
* rely on fbdev helpers error messages
* document changes to preferred depth
* dirty function no longer required
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315832/
The bochs driver (and virtual hardware) requires buffer objects to
reside in video ram to display them to the screen. So it can not
display the framebuffer console because the respective buffer object
is permanently pinned in system memory.
Using a shadow buffer for the console solves this problem. The console
emulation will pin the buffer object only during updates from the shadow
buffer. Otherwise, the bochs driver can freely relocated the buffer
between system memory and video ram.
v2:
* select shadow FB via struct drm_mode_config.prefer_shadow_fbdev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315833/
This patch replaces ast's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.
The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
ast_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.
v2:
* use drm_fb_helper_set_suspend_unlocked() in ast_drm_{thaw,freeze}()
* dirty function no longer required
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315835/
Generic framebuffer emulation uses a shadow buffer for framebuffers with
dirty() function. If drivers want to use the shadow FB without such a
function, they can now set prefer_shadow or prefer_shadow_fbdev in their
mode_config structures. The former flag is exported to userspace, the
latter flag is fbdev-only.
v3:
* only schedule dirty worker if fbdev uses shadow fb
* test shadow fb settings with boolean operators
* use bool for struct drm_mode_config.prefer_shadow_fbdev
* fix documentation comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315834/
This patch changes DRM clients to not map the buffer by default. The
buffer, like any buffer object, should be mapped and unmapped when
needed.
An unmapped buffer object can be evicted to system memory and does
not consume video ram until displayed. This allows to use generic fbdev
emulation with drivers for low-memory devices, such as ast and mgag200.
This change affects the generic framebuffer console. HW-based consoles
map their console buffer once and keep it mapped. Userspace can mmap this
buffer into its address space. The shadow-buffered framebuffer console
only needs the buffer object to be mapped during updates. While not being
updated from the shadow buffer, the buffer object can remain unmapped.
Userspace will always mmap the shadow buffer.
v2:
* change DRM client to not map buffer by default
* manually map client buffer for fbdev with HW framebuffer
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315830/
DRM clients, such as the fbdev emulation, have their buffer objects
mapped by default. Mapping a buffer implicitly prevents its relocation.
Hence, the buffer may permanently consume video memory while it's
allocated. This is a problem for drivers of low-memory devices, such as
ast, mgag200 or older framebuffer hardware, which will then not have
enough memory to display other content (e.g., X11).
This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal
DRM clients can use these functions to unmap and remap buffer objects
as needed.
There's no reference counting for vmap operations. Callers are expected
to either keep buffers mapped (as it is now), or call vmap and vunmap
in pairs around code that accesses the mapped memory.
v2:
* remove several duplicated NULL-pointer checks
v3:
* style and typo fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315831/
The current possible_clones setup doesn't look sensible. I'm assuming
the 0 and 1 are supposed to refer to the indexes of the hdmi and hda
encoders? So it kinda looks like we want hda+hdmi cloning, but then
dvo also claims to be cloneable with hdmi, but hdmi won't recipricate.
Benjamin tells me all encoders should be cloneable with each other,
so let's fix up the masks to indicate that.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-5-ville.syrjala@linux.intel.com
There's no point in the cast for accessing the base class. Just
take the address of the struct instead.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-4-ville.syrjala@linux.intel.com
Convert the panel-lvds binding to use DT schema. The panel-lvds schema
inherits from the panel-common.yaml schema and specific LVDS panel
bindings should inherit from this schema.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-10-robh@kernel.org
Convert the common panel bindings to DT schema consolidating scattered
definitions to a single schema file.
The 'simple-panel' binding just a collection of properties and not a
complete binding itself. All of the 'simple-panel' properties are
covered by the panel-common.txt binding with the exception of the
'no-hpd' property, so add that to the schema.
As there are lots of references to simple-panel.txt, just keep the file
with a reference to common.yaml for now until all the bindings are
converted.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-2-robh@kernel.org
