Move in_suspend flag to adev from gfx, so
can be used in other ip blocks, also keep
consistent with gpu_in_reset flag.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On CI/AI, fw was not loaded by smu, but
smu's fw still need to be released
when driver fini.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the struct was not in use any more.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
don't need to set fan1_enable to read fan sensors.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following lm-sensors 3.0.0,
Only enable pwm1 sysfs when fan control mode(pwm1_enable)
in manual
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add fan1_target for get/set fan speed in RPM unit
Add fan1_min/fan1_max for get min, max fan speed in RPM unit
Add fan1_enable to enable/disable the fan1 sensor
v3: drop the hardcode value of min/max rpm in comments pointed
out by Alex.
v2: query the min/max rpm gpu support instand of hardcode value.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so user can query the RPM range
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For getting the min/max fan speed in RPM units.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. make uvd_v7_0_enc_get_destroy_msg static
2. drop a function variable that always true
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().
[Why]
This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.
Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):
**THREAD 1** | **THREAD 2**
|
Initialize atomic state for flip |
|
Queue worker |
...
| Do work for flip
|
| Signal hw_done() on CRTC 1
| Signal hw_done() on CRTC 2
|
| Wait for flip_done() on CRTC 1
<---- **PREEMPTED BY THREAD 1**
Initialize atomic state for cursor |
update (1) |
|
Do cursor update work on both CRTCs |
|
Clear atomic state (2) |
**DONE** |
...
|
| Wait for flip_done() on CRTC 2
| *ERROR*
|
The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)
Some things to note:
* Due to the mirrored configuration, the cursor updates on both CRTCs.
* At this point, the pflip IRQ has already been handled, and flip_done
signaled on all CRTCs. The cursor commit can therefore continue.
* The old_crtc_states used by the cursor update are the **same states**
as the new_crtc_states used by the flip worker.
At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.
(*) Technically, 'state->crtcs[i].state' is freed, which was made to
reference old_crtc_state in drm_atomic_helper_swap_state()
[How]
By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.
Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns when one enumerated type is implicitly converted to another.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:315:19: warning:
implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/i2caux/dce110/aux_engine_dce110.c:349:19:
warning: implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The current enum is incorrect, it should be from aux_transaction_reply,
so use AUX_TRANSACTION_REPLY_HPD_DISCON.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICS that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and dce110 set_bandwidth this was removed
for power saving considerations.
This changed caused corruption under certain display configurations.
Originally thought to be Vega specific, it was also observed on Polaris.
[How]
The 15% is brought back but its placement differs from the original
patch. This boost should only be enable while DFS bypass is inactive.
This (like the Vega patch) is also a workaround that should be
removed after the root cause is identified.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to a small pre-fetch window, the active vline timing is a couple
of lines off when compared to what it should be.
[How]
Changed the calculation for the start vline to account for this window.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description] interlace mode shows wrong vertical timing.
Interface timing in Edid is half vertical timing as progressive timing.
driver doubled the vertical timing in edid_paser,
no need to double in optc again.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no reason why the common data needs to be kept separate.
[How]
Flatten the struct by moving common data into the DM IRQ struct.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ddc engines were recently changed to be independently tracked
from pipe count. the change was reflected in resource constructor
but not in destructor. this manifests as a memory leak when
pipe harvesting is enabled, since not all constructed ddc engines
are freed
[how]
make destructor symmetric with constructor for all dcX_resource
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DF keeps awake after S0i3 resume due to DRAM_STATE_CNTL
is set by bios command table during dcn init_hw.
[How]
As a work around, check STATE_CNTL status before init_hw,
if it is 0 before init_hw and set to 1 after init_hw,
change it to 0.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All ASICS we support has YCbCr support, so
the check is unnecessary, the currently logic
in validate output also returns true all
the time, so the unneccessary logic is removed
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently not supported, will black screen when set.
[How]
Fail validate timing helper for those modes.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also add dram clock to clocks struct, for systems that uses them.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously bandwidth validation was failing because swizzle mode was not
initialized during plane_state allocation. The swizzle mode was
calculated using pixed format which is how swizzle mode is initially
calculated in addrlib.
[How]
* Set default swizzle mode for validation to DC_SW_UNKNOWN
* Created new function in dcn10_assign_swizzle_mode which sets the
plane swizzle mode based on selected pixed format
* Added the call of assign_swizzle_mode into dc_validate_global_state
* Set failsafe swizzle mode back to DC_SW_LINEAR
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Same functions exist for all other signal types.
[how]
Add a function that checks against virtual signal type.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDMI_scramber is not enabled for pixel rate >340Mhz.
[How]
Calculate the phy clock to include the Hw frame packing factor.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Sometimes there are indications that the incorrect driver is being
loaded in automated tests. This change adds the ability for builds to
be tagged with a string, and picked up by the test infrastructure.
[how]
dc.c will allocate const for build id, which is init-ed with default
value, indicating production build. For test builds, build server will
find/replace this value. The test machine will then verify this value.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
Multiple runs of power measurement shows no imapct.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
HW CG feature will be enabled after hw ip initialized
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the vcn power will be controlled by VCN.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu only expose interface to other ip blocks.
in order to reduce dependence between smu and other ip blocks
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA IP can be power up/down via smu message
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The minRPM speed maybe equal to zero. so need to check
input RPM not equal to 0, otherwise cause divide-by-zero driver crash.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set the target rpm value to wrong register.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added Vega20 specific implementation for MGPU fan boost
feature.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MGPU fan boost feature is enabled only when two or more dGPUs
in the system.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Count all GPU instances from AMD(including iGPUs and
dGPUs) in the system.
V2: drop unnecessary initialization for other gpu_info
members except mutex
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the profile name line match previous generations more closely.
E.g.,
0 3D_FULL_SCREEN :
vs:
0(3D_FULL_SCREEN )
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vega10 and Vega20, the always on CUs are 12.
For Raven, it's 4.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable LBPW support on vega20.
v2: squash in warning fix (Alex)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Manual fan RPM and pwm setting on vega20 are
available now.
V2: correct the register for fan speed setting and
avoid divide-by-zero
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export the correct gfx voltage by hwmon interface.
V2: update the register naming for consistency
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ppt limit read out by hwmon interface is always 0.
Correct this hwmon interface output.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
BackMerge v4.19-rc6 into drm-next
I have some pulls based on rc6, and I prefer to have an explicit backmerge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aoJQ
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add out-bridge support
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
(airlied: this looked fine to me)
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
Cc: Neil Armstrong <narmstrong@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlu1H1cACgkQlvcN/ahK
Bwq9Lgf/RxZs3/4x6BQi0uNaJ+InuQDaPy91VWM7J4VSvTvPkDGQJgQS4a4AQqK8
p41rodzdFGhbE1C3GeWKd2eGDYG2+8M5xSzQ4F1q0gAJhseaJgC1EW3AP9zZRHwU
ByVLflSW3KJKXST+Id4pF10cVs1X1RZCkUQj7T6uRaM9i7bFXekwLJrV/cHRrnnV
KbYpzMq6s+JRxaLKp8s4OIfdpVxHxTYtj34S22r5D56X3N5NF+wg1MZQgaH4prjk
Bbc7Y5HfH2GgTaSc1X7haD/HAPfAST0YZmkew1OsWddIuCTKECddXYelVEA3B8+1
nBNKZXlqldPOwnvOMiqz52U+2o/aKw==
=zl4K
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-10-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Add EXPERT config option to allow phys mem leak from fbdev for blob drivers (Neil)
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003195957.GA64584@art_vandelay
Mostly code reorganizations and optimizations for vmwgfx.
- Move TTM code that's only used by vmwgfx to vmwgfx
- Break out the vmwgfx buffer- and resource validation code to a separate source file
- Get rid of a number of atomic operations during command buffer validation.
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928131157.2810-1-thellstrom@vmware.com
Since "drm/fb: Stop leaking physical address", the default behaviour of
the DRM fbdev emulation is to set the smem_base to 0 and pass the new
FBINFO_HIDE_SMEM_START flag.
The main reason is to avoid leaking physical addresse to user-space, and
it follows a general move over the kernel code to avoid user-space to
manipulate physical addresses and then use some other mechanisms like
dma-buf to transfer physical buffer handles over multiple subsystems.
But, a lot of devices depends on closed sources binaries to enable
OpenGL hardware acceleration that uses this smem_start value to
pass physical addresses to out-of-tree modules in order to render
into these physical adresses. These should use dma-buf buffers allocated
from the DRM display device instead and stop relying on fbdev overallocation
to gather DMA memory (some HW vendors delivers GBM and Wayland capable
binaries, but older unsupported devices won't have these new binaries
and are doomed until an Open Source solution like Lima finalizes).
Since these devices heavily depends on this kind of software and because
the smem_start population was available for years, it's a breakage to
stop leaking smem_start without any alternative solutions.
This patch adds a Kconfig depending on the EXPERT config and an unsafe
kernel module parameter tainting the kernel when enabled.
A clear comment and Kconfig help text was added to clarify why and when
this patch should be reverted, but in the meantime it's a necessary
feature to keep.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com
