sor_safe being the parent of the dpaux and dpaux1 clocks, it's not only
natural, but also slightly more efficient, to initialize it before its
children. This avoids orphaning the dpaux and dpaux1 clocks only to get
them reparented when the sor_safe clock is registered.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
It turns out that sor_safe, rather than pll_p, is the parent of the
dpaux and dpaux1 clocks.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The gxbb clock controller is the primary clock generation unit for the
AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several
PLLs and the usual post-dividers, muxes, dividers and leaf gates that
are fed into various IP blocks in the SoC.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Fractional MPLLs are a superset of the existing AmLogic MPLLs. They add
in a couple of new bitfields for further dividing the clock rate to
achieve rates with fractional hertz.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
MPLLs are adjustable rate clocks derived from PLLs. On both Meson8b and
GXBB they appear to be only derived from fixed_pll.
Add support for these clock types so that they can be added to their
respective drivers.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
There are a series of peripheral and system gate clocks that fan out
from the clk81 signal. Add a helper macro to statically initialize these
gate clocks.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Break the AmLogic clock code up so that only the necessary parts are
compiled and linked. The core code is selected by both arm and arm64
builds with COMMON_CLK_AMLOGIC. The individual drivers have their own
config options as well.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
This patch creates a proper platform_driver for the meson8b clock
controller. Use of CLK_OF_DECLARE is removed, and can be added back in
later if very early registration of some clocks is required.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the composite clock registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
To preserve git bisect this patch also flips the switch and starts using
of_clk_add_hw_provider instead of the deprecated meson_clk_register_clks
method. As a byproduct clk.c can be deleted.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
This clock is undocumented and always orphaned. Get rid of it until we
have more complete clock tree documentation.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the cpu clock registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
Ninja rename a5_clk to cpu_clk to better align with cpufreq convention.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the fixed factor registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the pll registration function and helpers. Replace unnecessary
configuration struct with static initialization of the desired clock
type.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the fixed_rate registration function and helpers from clkc.[ch].
Replace unnecessary configuration struct with static initialization of
the desired clock type.
While we're here, begin the transition to a proper platform_driver and
call of_clk_add_hw_provider with a shiny new struct clk_hw_onecell_data.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The register offsets in the data sheet are confusing. Document them more
thoroughly.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The timer clock feeds the timer block, which, among other things, is
used to drive the SOR lane sequencer. Since the Tegra timer driver is
not enabled on 64-bit ARM, nothing currently claims that clock and it
gets disabled by the common clock framework at late_init time.
Given the non-obvious dependencies, the timer clock can be considered
a critical part of the SoC infrastructure, requiring its clock source
to be always on.
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Due to copy and paste carelessly, RK3288_CLKxxx references are incorrect,
we need to fix them.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch exports related MAC clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch exports related i2s/spdif clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the latest information, the parent clock of the LVDS module
clock is the S0D4 clock, not the S2D1 clock.
Note that this change has no influence on actual operation, as the
rcar-du LVDS encoder driver doesn't use the parent clock's rate.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Renesas R8A7792 SoC also has the CPG MSTP clocks...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas R8A7792 SoC is a member of the R-Car gen2 family and so has CPG...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
- additions for exynos5410 SoC required for Odroid XU board support,
- register accessors fixes for kernels built for big endian operation
(mostly exynos4 SoCs),
- Exynos5433 clock definitions fixes required for suspend to RAM and
the audio subsystem operation,
- many cleanups changing attributes of the clock initializer data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJXXq60AAoJEE1bIKeAnHqL3a8P/Ak0eUGxN6TRs2QvlEh0Z1TR
mXUpa3ZC9uIIw1CFr4Kr2Us04NKHIB/L+XkRmO2tpvgyzmfyhU72WBBBvepQDdnk
jDPLz+rodBy0rpfn49UX0yd2xVoO+NuAwAXYOtFiWJRx+olHbqZ2XDYWg4c9YXdq
XK08baH3EwvazjIF115ZfyqyF3rco50ALFjd1naoCJSEgiUlrQZ/TmCvq95BfSo+
gBnKiZfe5T/1CntOibFr34Uub0M022ig+GeodGAGzDe4Jz5v3RRhwzvdMgff2BZR
F0jeY0c7C0kgNQsDdvnMl1dLVE6gZfOcTiER//3vBaVXHcrhN4bGMcwDGPOxDWNX
VEaMIK59Pg+wiVB18wzqHr8StmpOydKpizIyncrVCGrbYc3oN2JVKGCdovKRdgJQ
CHV84tZEthFPnF6Wk0UexJD+WUoIftnvyDy615hC/X9TSKL+8SdOMTtXLjDcmUOz
04AUP4QR5XZoWh431bKC8AizLIX9D12/YB4f7SwEbWIXddvsdl0GAwCqchR0sfY8
eljjAk+RYvY6eYntgEYTtbhzm5H6CxvVvfRCYJhIEOv8T7kOdoPEiGCxsEKBtLY1
NcELwOq3+dIx+2PPv9QndtE4pfGwyumB9uWkkObHRkoX1q4zOD88BxKbFiJTsxvR
Z+wWp5/x6v0vgprbfJgz
=SoGI
-----END PGP SIGNATURE-----
Merge tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung into clk-next
Merge changes from Sylwester Nawrocki for samsung clk drivers:
- a fix for exynos7 to prevent gating some critical CMU clocks,
- addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
- additions for exynos5410 SoC required for Odroid XU board support,
- register accessors fixes for kernels built for big endian operation
(mostly exynos4 SoCs),
- Exynos5433 clock definitions fixes required for suspend to RAM and
the audio subsystem operation,
- many cleanups changing attributes of the clock initializer data
* tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung: (41 commits)
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag to PCIE device
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flags to avoid hang during S2R
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag for AUD UART
clk: samsung: exynos4: fixup reg access on be
clk: samsung: fixup endian in pll clk
clk: samsung: exynos5410: Add WDT, ACLK266 and SSS clocks
clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
clk: samsung: exynos5433: prepare for adding CPU clocks
clk: samsung: Suppress unbinding to prevent theoretical attacks
clk: samsung: exynos5420: Set ID for aclk333 gate clock
clk: samsung: exynos5410: Add TMU clock
clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
clk: samsung: exynos5410: Add serial3, USB and PWM clocks
clk: samsung: exynos3250: Move PLL rates data to init section
clk: samsung: Fully constify mux parent names
clk: samsung: exynos5250: Move sleep init function to init section
clk: samsung: exynos5420: Move sleep init function and PLL data to init section
clk: samsung: exynos5433: Move PLL rates data to init section
clk: samsung: exynos5433: Constify all clock initializers
...
Correct comments for __clk_determine_rate.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
PLL clock on WM8650 is calculated in the following way:
M * parent [O1] => / P [O2] => / D [O3]
Where O2 is 600MHz >= (M * parent) / P >= 300MHz.
Current algorithm does not met this requirement, so that the
function may return rates which are not supported by the hardware.
This patch fixes the algorithm and simplifies the code, reducing
the calculation time by ~10000 times (according to usermode app) by
removing the nested loops.
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This fixes some false positive warnings we get with older compiler
versions:
clk-vt8500.c: In function ‘wm8650_find_pll_bits’:
clk-vt8500.c:430:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:429:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:428:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8750_find_pll_bits’:
clk-vt8500.c:509:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:508:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:507:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8850_find_pll_bits’:
clk-vt8500.c:560:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:559:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:558:14: ‘best_mul’ may be used uninitialized in this function
As the local variables are only use for temporaries, we can just
as well assign the final values directly, which also makes the
code slightly shorter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix the warning from missing "clk.h" include which
defines hi6220_register_clkdiv() function.
drivers/clk/hisilicon/clkdivider-hi6220.c:102:12: warning: symbol 'hi6220_register_clkdiv' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix the implicit declaration of iproc_armpll_setup() by
including clk-iproc.h which defines it. Fixes the warning:
drivers/clk/bcm/clk-iproc-armpll.c:242:13: warning: symbol 'iproc_armpll_setup' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The of_sama5d2_clk_generated_setup() is not exported outside
of the driver, so make it static to fix the warning about it
being not static:
drivers/clk/at91/clk-generated.c:270:13: warning: symbol 'of_sama5d2_clk_generated_setup' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
concerning error handling and initialization and a revert of the
mmc-phase clock initialization, as this could conflict with the
bootloader setting of this clock and a real solution to initing
the phase correctly from dw_mmc went in as fix for 4.7 through
the mmc tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXWFcNAAoJEPOmecmc0R2B8CAH/2mR87b8b0KA6zEwP8gb6swH
Bj+aVFAFR4rw7iXRfkgUPur/mc5rJXpH8H8F2stdXBqwNd3lDHGLMHyvZkNZprfP
z05lXGN1vDwXIGrw+eJU8+NVHHUKPx4w9fi70k3L+CKOqzjnSlH4QyaBYll4wqre
aM3zAnnuKPplnkHD3RbQMJvGtf/GRHXSEEAFgcTxCfKcPjDSGrdJE+zdPXUYFG+d
GqAKC36y/kFJx/VMzyeMbsfGL6nyloN47r975/apjafOx0iN7vgRzzASznsp+4mj
37SiwARjyCkVRuT6S+ViM8fBHAjtcRGVUKusRWCJGbjcXCIMf+nxc2EeH1AbBIQ=
=5BcJ
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
A bunch of fixes. Some for the newly added rk3399 clock tree, some
concerning error handling and initialization and a revert of the
mmc-phase clock initialization, as this could conflict with the
bootloader setting of this clock and a real solution to initing
the phase correctly from dw_mmc went in as fix for 4.7 through
the mmc tree.
* tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: release io resource when failing to init clk on rk3399
clk: rockchip: fix cpuclk registration error handling
clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
clk: rockchip: mark rk3399 GIC clocks as critical
clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
In case of error, the function syscon_node_to_regmap() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: 0bbd72b4c6 ("clk: Add Oxford Semiconductor OXNAS Standard Clocks")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
In the current multiplier base clock implementation, if the
CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the
multiplier computed remains within the boundaries of our clock.
This means that if the clock we want to reach is below the parent rate,
or if the multiplier is above the maximum that we can reach, we will end up
with a completely bogus one that the clock cannot achieve.
Fixes: f2e0a53271 ("clk: Add a basic multiplier clock")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com
Make the sor1 and sor1_src clocks available on Tegra210. They will be
used by the display driver to support HDMI and DP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The sor1 clock on Tegra210 is structured in the following way:
+-------+
| pllp |---+
+-------+ | +--------------+ +-----------+
+----| | | sor_safe |
+-------+ | | +-----------+
| plld |--------| | |
+-------+ | | +-----------+
| sor1_src |-------| |
+-------+ | | +-----------+
| plld2 |--------| | |
+-------+ | | |
+----| | |
+-------+ | +--------------+ |
| clkm |---+ +-----------+
+-------+ +--------------+ | |
| sor1_brick |-------| sor1 |
+--------------+ | |
+-----------+
This is impractical to represent in a clock tree, though, because there
is no name for the mux that has sor_safe and sor1_src as parents. It is
also much more cumbersome to deal with the additional mux because users
of these clocks (the display driver) would have to juggle with an extra
mux for no real reason.
To simply things, the above is squashed into two muxes instead, so that
it looks like this:
+-------+
| pllp |---+
+-------+ | +--------------+ +-----------+
+----| | | sor_safe |
+-------+ | | +-----------+
| plld |--------| | |
+-------+ | | +-----------+
| sor1_src |-------| sor1 |
+-------+ | | +-----------+
| plld2 |--------| | | |
+-------+ | | | |
+----| | | |
+-------+ | +--------------+ | |
| clkm |---+ | |
+-------+ +--------------+ | |
| sor1_brick |-----------+---+
+--------------+
This still very accurately represents the hardware. Note that sor1 has
sor1_brick as input twice, that's because bit 1 in the mux selects the
sor1_brick irrespective of bit 0.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enabling spread spectrum on pll_d2 can lead to issues with display
modes. HDMI monitors, for example, would report "Signal Error" and
some modes driven over DisplayPort would generate fuzzy horizontal
bands.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The powerdown bit is a bit confused, let's change it to power_bit
to relfect both powerdown and powerup case according to different
plls.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit f53947456f ("ARM: clk: imx: update pllv3 to support imx7"),
the former used BM_PLL_POWER bit is not correct anymore for IMX7 ENET.
Instead, pll->powerdown holds the correct bit, so using powerdown bit
in clk_pllv3_{prepare | unprepare} functions.
Fixes: f53947456f ("ARM: clk: imx: update pllv3 to support imx7")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pllx_bypass_src mux shouldn't be the parent of pllx clock
since it's only valid when when pllx BYPASS bit is set.
Thus it is actually one parent of pllx_bypass only.
Instead, pllx parent should be fixed to osc according to
reference manual.
Other plls have the same issue.
e.g. before fix, the pll tree is:
osc 6 6 24000000 0 0
pll1_bypass_src 0 0 24000000 0 0
pll1 0 0 792000000 0 0
pll1_bypass 0 0 792000000 0 0
pll1_sys 0 0 792000000 0 0
After the fix, it's:
osc 6 6 24000000 0 0
pll1 0 0 792000000 0 0
pll1_bypass 0 0 792000000 0 0
pll1_sys 0 0 792000000 0 0
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
