This patch is first version of Mediatek Command Queue(CMDQ) driver. The
CMDQ is used to help write registers with critical time limitation,
such as updating display configuration during the vblank. It controls
Global Command Engine (GCE) hardware to achieve this requirement.
Currently, CMDQ only supports display related hardwares, but we expect
it can be extended to other hardwares for future requirements.
Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Secure Proxy is another communication scheme in Texas Instrument's
devices intended to provide an unique communication path from various
processors in the System on Chip(SoC) to a central System Controller.
Secure proxy is, in effect, an evolution of current generation Message
Manager hardware block found in K2G devices. However the following
changes have taken place:
Secure Proxy instance exposes "threads" or "proxies" which is
primary representation of "a" communication channel. Each thread is
preconfigured by System controller configuration based on SoC usage
requirements. Secure proxy by itself represents a single "queue" of
communication but allows the proxies to be independently operated.
Each Secure proxy thread can uniquely have their own error and threshold
interrupts allowing for more fine control of IRQ handling.
Provide the driver support for Secure Proxy and thread instances.
NOTE: Secure proxy configuration is only done by System Controller,
hence these are assumed to be pre-configured instances.
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
For newer generation of the hardware, the naming of the region is
decided at integration level and there could be additional regions
as well. Hence move the region naming to be described from compatible
descriptor.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Change mask used to extract the message count to be descriptor based.
This is to support changes for count location for various SoC
solutions.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In a much bigger system SoCs, the number of Rx channels can be
many and mostly unused based on the system of choice, and not all
Rx channels need IRQs and allocating all memory at probe will be
inefficient. Some SoCs could have total threads in the 100s and usage
would be just 1 Rx thread.
Thus, request and map the IRQs and allocate memory only when needed.
Since these channels are requested by client drivers on need, our
utilization will be optimal.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Though q_proxies and q_slices do describe the hardware configuration,
they are not necessary for operation given that the values are
always default. Hence drop the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The OMAP Mailbox driver is directly using an integer value as
match data for distinguishing the interrupt register layout
between OMAP2 and OMAP4+ SoCs. Introduce a dedicated structure
for storing this match data, and simplify the probe function by
using the of_device_get_match_data() function. This allows the
driver to scale for 64-bit platforms by eliminating the unnecessary
type-casting between a u32 and a void pointer types.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Use the appropriate SPDX license identifier in the OMAP Mailbox
driver source files and drop the previous boilerplate license text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.
Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.
This code was detected with the help of Coccinelle.
Cc: stable@vger.kernel.org
Fixes: f700e84f41 ("mailbox: Add support for APM X-Gene platform mailbox driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
- New STMicroelectronics STM32 IPCC driver
- Enable QCom driver to run more controllers
- Fixed return code from null to ptr-err for Brcm driver
- Fix kconfig dependencies for the HiSilicon driver
-----BEGIN PGP SIGNATURE-----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=Eao7
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v4.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- Remove HAS_DMA config dependencies
- New STMicroelectronics STM32 IPCC driver
- Enable QCom driver to run more controllers
- Fixed return code from null to ptr-err for Brcm driver
- Fix kconfig dependencies for the HiSilicon driver
* tag 'mailbox-v4.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox/drivers/hisi: Consolidate the Kconfig for the MAILBOX
mailbox: Add support for Qualcomm SDM845 SoCs
dt-bindings: mailbox: Add APSS shared binding for SDM845 SoCs
mailbox: bcm2835: Fix of_xlate return value
mailbox: qcom: Add msm8998 hmss compatible
mailbox: add STMicroelectronics STM32 IPCC driver
dt-bindings: mailbox: add STMicroelectronics STM32 IPCC binding
mailbox: Remove depends on HAS_DMA in case of platform dependency
The current defconfig is inconsistent as it selects the mailbox and
the clock for the hi6220 and the hi3660 without having their Kconfigs
making sure the dependencies are correct. It ends up when selecting
different versions for the kernel (for example when git bisecting)
those options disappear and they don't get back, leading to unexpected
behaviors. In our case, the cpufreq driver does no longer work because
the clock fails to initialize due to the clock stub and the mailbox
missing.
In order to have the dependencies correctly set when defaulting, let's
do the same as commit 3a49afb84c ("clk: enable hi655x common clk
automatically") where we select automatically the driver when the
parent driver is selected. With sensible defaults in place, we can leave
other choices for EXPERT.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The bcm2835-mailbox returns NULL instead of an error pointer, which could
result in a NULL ptr dereference in mbox_request_channel. So fix this
by returning a proper error pointer.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 0bae6af6d7 ("mailbox: Enable BCM2835 mailbox support")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Qualcomm MSM8998 platform has a APCS HMSS GLOBAL block, add the
compatible for this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The STMicroelectronics STM32 Inter-Processor Communication Controller
(IPCC) is used for communicating data between two processors.
It provides a non blocking signaling mechanism to post and retrieve
communication data in an atomic way.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There have been multiple reports of the following error message:
[ 0.068293] Error parsing PCC subspaces from PCCT
This error message is not correct. In multiple cases examined, the PCCT
(Platform Communications Channel Table) concerned is actually properly
constructed; the problem is that acpi_pcc_probe() which reads the PCCT
is making the assumption that the only valid PCCT is one that contains
subtables of one of two types: ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE or
ACPI_PCCT_TYPE_HW_REDUCED_TYPE2. The number of subtables of these
types are counted and as long as there is at least one of the desired
types, the acpi_pcc_probe() succeeds. When no subtables of these types
are found, regardless of whether or not any other subtable types are
present, the error mentioned above is reported.
In the cases reported to me personally, the PCCT contains exactly one
subtable of type ACPI_PCCT_TYPE_GENERIC_SUBSPACE. The function
acpi_pcc_probe() does not count it as a valid subtable, so believes
there to be no valid subtables, and hence outputs the error message.
An example of the PCCT being reported as erroneous yet perfectly fine
is the following:
Signature : "PCCT"
Table Length : 0000006E
Revision : 05
Checksum : A9
Oem ID : "XXXXXX"
Oem Table ID : "XXXXX "
Oem Revision : 00002280
Asl Compiler ID : "XXXX"
Asl Compiler Revision : 00000002
Flags (decoded below) : 00000001
Platform : 1
Reserved : 0000000000000000
Subtable Type : 00 [Generic Communications Subspace]
Length : 3E
Reserved : 000000000000
Base Address : 00000000DCE43018
Address Length : 0000000000001000
Doorbell Register : [Generic Address Structure]
Space ID : 01 [SystemIO]
Bit Width : 08
Bit Offset : 00
Encoded Access Width : 01 [Byte Access:8]
Address : 0000000000001842
Preserve Mask : 00000000000000FD
Write Mask : 0000000000000002
Command Latency : 00001388
Maximum Access Rate : 00000000
Minimum Turnaround Time : 0000
To fix this, we count up all of the possible subtable types for the
PCCT, and only report an error when there are none (which could mean
either no subtables, or no valid subtables), or there are too many.
We also change the logic so that if there is a valid subtable, we
do try to initialize it per the PCCT subtable contents. This is a
change in functionality; previously, the probe would have returned
right after the error message and would not have tried to use any
other subtable definition.
Tested on my personal laptop which showed the error previously; the
error message no longer appears and the laptop appears to operate
normally.
Signed-off-by: Al Stone <ahs3@redhat.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hi3660 mailbox controller is used to send message within multiple
processors, MCU, HIFI, etc. It supports 32 mailbox channels and every
channel can only be used for single transferring direction. Once the
channel is enabled, it needs to specify the destination interrupt and
acknowledge interrupt, these two interrupt vectors are used to create
the connection between the mailbox and interrupt controllers.
The data transferring supports two modes, one is named as "automatic
acknowledge" mode so after send message the kernel doesn't need to wait
for acknowledge from remote and directly return; there have another mode
is to rely on handling interrupt for acknowledge.
This commit is for initial version driver, which only supports
"automatic acknowledge" mode to support CPU clock, which is the only
one consumer to use mailbox and has been verified. Later may enhance
this driver for interrupt mode (e.g. for supporting HIFI).
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ruyi Wang <wangruyi@huawei.com>
Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
With the addition of the ARCH_TEGRA_194_SOC driver, we get a new Kconfig warning:
warning: (ARCH_TEGRA_186_SOC && ARCH_TEGRA_194_SOC) selects TEGRA_HSP_MBOX which has unmet direct dependencies (MAILBOX && ARCH_TEGRA_186_SOC)
It looks like the dependency is a bit too strict here, allowing the driver to
be built for any Tegra chip avoids the problem.
Fixes: 6f9ed07fde ("soc/tegra: Add Tegra194 SoC configuration option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a clock controller functionality provided by the APCS hardware
block of msm8916 devices. The device-tree would represent an APCS node
with both mailbox and clock provider properties.
Create a platform child device for the clock controller functionality so
the driver can probe and use APCS as parent.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This hardware block provides more functionalities that just IPC. Convert
it to regmap to allow other child platform devices to use the same regmap.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
message->len is of type size_t and %d is incorrect format usage.
Instead use %zu for handling size_t correctly.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Switch to SPDX licensing and drop the GPL text which comes redundant.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
- Core: Prefer ACK method over POLL, if both supported
- Test: use flag instead of special character
- FlexRM: Usual driver internal minor churn
- Omap: fix error path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3s/o
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"Change to POLL api and fixes for FlexRM and OMAP driver.
Summary:
- Core: Prefer ACK method over POLL, if both supported
- Test: use flag instead of special character
- FlexRM: Usual driver internal minor churn
- Omap: fix error path"
* tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox/omap: unregister mbox class
mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready
mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone
mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs
mailbox: bcm-flexrm-mailbox: Use common GPL comment header
mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC
mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings
mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence
platform_driver_register() can fail here and we must unregister mbox
class.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Currently we rely on the first byte of the Rx buffer to check if there's
any data available to be read. If the first byte of the received buffer
is zero (i.e. null character), then we fail to signal that data is
available even when it's available.
Instead introduce a boolean variable to track the data availability and
update it in the channel receive callback as ready and clear it when the
data is read.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Currently the mailbox framework sets txdone_method to TXDONE_BY_POLL if
the controller sets txdone_by_poll. However some clients can have a
mechanism to do TXDONE_BY_ACK which they can specify by knows_txdone.
However, we endup setting both TXDONE_BY_POLL and TXDONE_BY_ACK in that
case. In such scenario, we may end up with below warnings as the tx
ticker is run both by mailbox framework and the client.
WARNING: CPU: 1 PID: 0 at kernel/time/hrtimer.c:805 hrtimer_forward+0x88/0xd8
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc5 #242
Hardware name: ARM LTD ARM Juno Development Platform
task: ffff8009768ca700 task.stack: ffff8009768f8000
PC is at hrtimer_forward+0x88/0xd8
LR is at txdone_hrtimer+0xd4/0xf8
Call trace:
hrtimer_forward+0x88/0xd8
__hrtimer_run_queues+0xe4/0x158
hrtimer_interrupt+0xa4/0x220
arch_timer_handler_phys+0x30/0x40
handle_percpu_devid_irq+0x78/0x130
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x5c/0xb8
gic_handle_irq+0x54/0xa8
This patch fixes the issue by resetting TXDONE_BY_POLL if client has set
knows_txdone.
Cc: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
- Update the ACPICA code to upstream revision 20170831 including
* PDTT table header support (Bob Moore).
* Cleanup and extension of internal string-to-integer conversion
functions (Bob Moore).
* Support for 64-bit hardware accesses (Lv Zheng).
* ACPI PM Timer code adjustment to deal with 64-bit return values
of acpi_hw_read() (Bob Moore).
* Support for deferred table verification in acpiexec (Lv Zheng).
- Fix APEI to use the fixmap instead of ioremap_page_range() which
cannot work correctly the way the code in there attempted to use
it and drop some code that's not necessary any more after that
change (James Morse).
- Clean up the APEI support code and make it use 64-bit timestamps
(Arnd Bergmann, Dongjiu Geng, Jan Beulich).
- Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani).
- Add support for PCC subspace IDs to the ACPI CPPC driver (George
Cherian).
- Fix an ACPI EC driver regression related to the handling of EC
events during the "noirq" phases of system suspend/resume (Lv
Zheng).
- Delay the initialization of the lid state in the ACPI button
driver to fix issues appearing on some systems (Hans de Goede).
- Extend the KIOX000A "device always present" quirk to cover all
affected BIOS versions (Hans de Goede).
- Clean up some code in the ACPI core and drivers (Colin Ian King,
Gustavo Silva).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=7mrU
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update ACPICA to upstream revision 20170831, fix APEI to use the
fixmap instead of ioremap_page_range(), add an operation region driver
for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI
CPPC driver, fix a few assorted issues and clean up some code.
Specifics:
- Update the ACPICA code to upstream revision 20170831 including
* PDTT table header support (Bob Moore).
* Cleanup and extension of internal string-to-integer conversion
functions (Bob Moore).
* Support for 64-bit hardware accesses (Lv Zheng).
* ACPI PM Timer code adjustment to deal with 64-bit return values
of acpi_hw_read() (Bob Moore).
* Support for deferred table verification in acpiexec (Lv Zheng).
- Fix APEI to use the fixmap instead of ioremap_page_range() which
cannot work correctly the way the code in there attempted to use it
and drop some code that's not necessary any more after that change
(James Morse).
- Clean up the APEI support code and make it use 64-bit timestamps
(Arnd Bergmann, Dongjiu Geng, Jan Beulich).
- Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani).
- Add support for PCC subspace IDs to the ACPI CPPC driver (George
Cherian).
- Fix an ACPI EC driver regression related to the handling of EC
events during the "noirq" phases of system suspend/resume (Lv
Zheng).
- Delay the initialization of the lid state in the ACPI button driver
to fix issues appearing on some systems (Hans de Goede).
- Extend the KIOX000A "device always present" quirk to cover all
affected BIOS versions (Hans de Goede).
- Clean up some code in the ACPI core and drivers (Colin Ian King,
Gustavo Silva)"
* tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: Mark expected switch fall-throughs
ACPI / LPSS: Remove redundant initialization of clk
ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs
mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file
ACPI / sysfs: Make function param_set_trace_method_name() static
ACPI / button: Delay acpi_lid_initialize_state() until first user space open
ACPI / EC: Fix regression related to triggering source of EC event handling
APEI / ERST: use 64-bit timestamps
ACPI / APEI: Remove arch_apei_flush_tlb_one()
arm64: mm: Remove arch_apei_flush_tlb_one()
ACPI / APEI: Remove ghes_ioremap_area
ACPI / APEI: Replace ioremap_page_range() with fixmap
ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()
ACPICA: Update version to 20170831
ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read
ACPICA: String conversions: Update to add new behaviors
ACPICA: String conversions: Cleanup/format comments. No functional changes
ACPICA: Restructure/cleanup all string-to-integer conversion functions
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Move the MAX_PCC_SUBSPACES definition to acpi/pcc.h file in
preparation to add subspace ID support for cppc_acpi driver.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By default, we build Broadcom FlexRM driver as loadable module for
iProc SOCs so that kernel image is little smaller and we load FlexRM
driver only when required.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch makes the comment header of Broadcom FlexRM driver
similar to the GPL comment header used across Broadcom driver
sources.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Broadcom FlexRM Mailbox is only present in the Broadcom IPROC SoCs.
Add depends on ARCH_BCM_IPROC to BCM_FLEXRX_MBOX.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch updates all dev_err() and dev_warn() to print
ring number so that we have more info for debugging.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
As-per suggestion from FlexRM HW folks, we have to first set
FlexRM ring flush state and then clear it for FlexRM ring flush
to work properly.
Currently, the FlexRM driver has incomplete FlexRM ring flush
sequence which causes repeated insmod+rmmod of mailbox client
drivers to fail.
This patch fixes FlexRM ring flush sequence in flexrm_shutdown()
as described above.
Fixes: dbc049eee7 ("mailbox: Add driver for Broadcom FlexRM
ring manager")
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
- Modified the Broadcom's Flexrm mailbox driver to
support debugfs and TX-Done mechanism by ACK.
Nothing for the core mailbox stack.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=N5tj
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v4.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"Just behavorial changes to a controller driver: the Broadcom's Flexrm
mailbox driver has been modifified to support debugfs and TX-Done
mechanism by ACK.
Nothing for the core mailbox stack"
* tag 'mailbox-v4.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: bcm-flexrm-mailbox: Use txdone_ack instead of txdone_poll
mailbox: bcm-flexrm-mailbox: Use bitmap instead of IDA
mailbox: bcm-flexrm-mailbox: Fix mask used in CMPL_START_ADDR_VALUE()
mailbox: bcm-flexrm-mailbox: Add debugfs support
mailbox: bcm-flexrm-mailbox: Set IRQ affinity hint for FlexRM ring IRQs
Currently, FlexRM driver uses txdone_poll method of Linux Mailbox
to model the send_data() callback. To achieve this, we have introduced
"last_pending_msg" pointer for each FlexRM ring which keeps track of
the message that did not fit in the FlexRM ring.
This patch updates FlexRM driver to use txdone_ack method instead of
txdone_poll method because txdone_poll is not efficient for FlexRM
and requires additional tracking in FlexRM driver.
Also, moving to txdone_ack method helps us remove "last_pending_msg"
pointer and last_tx_done() callback.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Currently, we are using IDA library for managing IDs
on a FlexRM ring. The IDA library dynamically allocates
memory for underlying data structures which can cause
potential locking issue when allocating/free IDs from
flexrm_new_request() and flexrm_process_completions().
To tackle this, we replace use of IDA with bitmap for
each FlexRM ring and also protect the bitmap with FlexRM
ring lock.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The mask used in CMPL_START_ADDR_VALUE() should be 27bits instead of
26bits. This incorrect mask was causing completion writes to 40bits
physical address fail.
This patch fixes mask used in CMPL_START_ADDR_VALUE() macro.
Fixes: dbc049eee7 ("mailbox: Add driver for Broadcom FlexRM
ring manager")
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch adds debugfs support to Broadcom FlexRM driver
so that we can see FlexRM ring state when any issue happens.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch set IRQ affinity hint for FlexRM ring IRQ at time of
enabling ring (i.e. flexrm_startup()). The IRQ affinity hint will
allow FlexRM driver to distribute FlexRM ring IRQs across online
CPUs so that all FlexRM ring IRQs don't land in CPU0 by default.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When booting on an ACPI enabled system that does not provide the
Platform Communications Channel Table (PCCT), the pcc mailbox driver
prints -
[ 0.484261] PCCT header not found.
during probe before returning -ENODEV.
This message clutters the bootlog and doesn't provide any useful
information. Drop this message.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull mailbox updates from Jassi Brar:
- Minor improvement : avoid requiring unnecessary startup/shutdown
callback that many drivers seem to not need
- New controller driver for Qualcomm's APCS IPC
* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Introduce Qualcomm APCS IPC driver
dt-bindings: mailbox: Introduce Qualcomm APCS global binding
mailbox: Make startup and shutdown ops optional
This implements a driver that exposes the IPC bits found in the APCS
Global block in various Qualcomm platforms. The bits are used to signal
inter-processor communication signals from the application CPU to other
masters.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some mailbox hardware doesn't have to perform any additional operations
on startup of shutdown, so make these optional.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
ACPICA commit e7b817e3c405a4fb9ae9ee7ae4992b8c1f20d284
Extended PCC Subspaces (types 3 and 4)
Link: https://github.com/acpica/acpica/commit/e7b817e3
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We already check if the message is empty before calling the client
tx_done callback. Calling completion on a wait event is also invalid
if the message is empty.
This patch moves the existing empty message check earlier.
Fixes: 2b6d83e2b8 ("mailbox: Introduce framework for mailbox")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
If a wait_for_completion_timeout() call returns due to a timeout,
complete() can get called after returning from the wait which is
incorrect and can cause subsequent transmissions on a channel to fail.
Since the wait_for_completion_timeout() sees the completion variable
is non-zero caused by the erroneous/spurious complete() call, and
it immediately returns without waiting for the time as expected by the
client.
This patch fixes the issue by skipping complete() call for the timer
expiry.
Fixes: 2b6d83e2b8 ("mailbox: Introduce framework for mailbox")
Reported-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There exists a race when msg_submit return immediately as there was an
active request being processed which may have completed just before it's
checked again in mbox_send_message. This will result in return to the
caller without waiting in mbox_send_message even when it's blocking Tx.
This patch fixes the issue by waiting for the completion always if Tx
is in blocking mode.
Fixes: 2b6d83e2b8 ("mailbox: Introduce framework for mailbox")
Reported-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Broadcom FlexRM mailbox driver uses platform MSI support but
not all ARCHs provide asm/msi.h. Due to this, we get compilation
error in Broadcom FlexRM mailbox driver via linux/msi.h on ARCHs
which lack asm/msi.h.
This patch removes "depends on COMPILE_TEST" for Kconfig option
BCM_FLEXRM_MBOX so that Broadcom FlexRM mailbox driver is only
compiled for ARM64.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
It is allowed by code to register mailbox controller that sets txdone_poll
flag to request timer-based polling with missed ->last_tx_done() method.
If such thing happens and since presence of last_tx_done() is not checked
it will fail in hrtimer callback function txdone_hrtimer() when first
message will be transmitted.
This patch adds check for this method and logging of error on
registration of mailbox controller if it requested timer-based polling.
Signed-off-by: Alexey Klimov <alexey.klimov@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some of the Broadcom iProc SoCs have FlexRM ring manager
which provides a ring-based programming interface to various
offload engines (e.g. RAID, Crypto, etc).
This patch adds a common mailbox driver for Broadcom FlexRM
ring manager which can be shared by various offload engine
drivers (implemented as mailbox clients).
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Adds support for Northstar Plus (NS+) products to the PDC mailbox
driver. The PDC driver was originally written to support the PDC
ring manager in the Northstar2 (64-bit) device. The NS+ (32 bit
device) uses an almost identical ring manager, though with a
different name. We just need to check for the type of hardware in
use, in order to write the appropriate interrupt configuration register.
Also updated DMA width to be correct for both NS+ and NS2.
Tested on NS+ and NS2.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Check for mbox_chan_ops structures that are only stored in the ops field
of a mbox_controller structure. This field is of type const struct
mbox_chan_ops *, so mbox_chan_ops structures having this property can be
declared as const.
Done using Coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
struct mbox_chan_ops i@p = {...};
@ok1@
identifier r1.i;
struct hi6220_mbox mbox;
struct slimpro_mbox ctx;
position p;
@@
(
mbox.controller.ops=&i@p
|
ctx.mb_ctrl.ops=&i@p
)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct mbox_chan_ops i;
File size details:
text data bss dec hex filename
2310 248 0 2558 9fe drivers/mailbox/hi6220-mailbox.o
2366 192 0 2558 9fe drivers/mailbox/hi6220-mailbox.o
1500 248 0 1748 6d4 mailbox/mailbox-xgene-slimpro.o
1556 192 0 1748 6d4 mailbox/mailbox-xgene-slimpro.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng).
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=55TG
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Here are new versions of two ACPICA changes that were deferred
previously due to a problem they had introduced, two cleanups on top
of them and the removal of a useless warning message from the ACPI
core.
Specifics:
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng)
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui)"
* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
ACPI: do not warn if _BQC does not exist
* acpica:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
* acpi-scan:
ACPI: do not warn if _BQC does not exist
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull mailbox updates from Jassi Brar:
- new features (poll and SRAM usage) added to the mailbox-test driver
- major update of Broadcom's PDC controller driver
- minor fix for auto-loading test and STI driver modules
* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: mailbox-test: allow reserved areas in SRAM
mailbox: mailbox-test: add support for fasync/poll
mailbox: bcm-pdc: Remove unnecessary void* casts
mailbox: bcm-pdc: Simplify interrupt handler logic
mailbox: bcm-pdc: Performance improvements
mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors
mailbox: bcm-pdc: Convert from threaded IRQ to tasklet
mailbox: bcm-pdc: Try to improve branch prediction
mailbox: bcm-pdc: streamline rx code
mailbox: bcm-pdc: Convert from interrupts to poll for tx done
mailbox: bcm-pdc: PDC driver leaves debugfs files after removal
mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted
mailbox: bcm-pdc: Use octal permissions rather than symbolic
mailbox: sti: Fix module autoload for OF registration
mailbox: mailbox-test: Fix module autoload
When CONFIG_SRAM is enable and the SRAM region is found, the entire SRAM
region resource is requested and marked as occupied by SRAM driver even
if certain parts of regions is marked reserved.
It's quite possible that a small region of the SRAM is reserved for all
the mailbox communication and hence it may fail to request the region
as it's already marked busy region.
This patch tries to just do a ioremap of this mailbox memory region if
it finds it busy.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Currently the read operation on the message debug file returns error if
there's no data ready to be read. It expects the userspace to retry if
it fails. Since the mailbox response could be asynchronous, it would be
good to add support to block the read until the data is available.
We can also implement poll file operations so that the userspace can
wait to become ready to perform any I/O.
This patch implements the poll and fasync file operation callback for
the test mailbox device.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Remove unnecessary void* casts in register writes. Fix two other
minor formatting issues.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Earlier versions of the PDC driver registered for both
transmit and receive interrupts. The hard IRQ handler had to
communicate to the soft handler which interrupt(s) had occurred.
The PDC driver no longer registers for tx interrupts. So there is
no reason to save the intstatus. So remove the intstatus member
of the PDC state.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Three changes to improve performance in the PDC driver:
- disable and reenable interrupts while the interrupt handler is
running
- update rxin and txin descriptor indexes more efficiently
- group receive descriptor context into a structure and keep
context in a single array rather than five to improve locality
of reference
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In PDC driver, it is not necessary to use iowrite32()
when writing DMA descriptors to the transmit and receive rings.
The ring memory is in host memory. So convert to normal
assignment statements.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Previously used threaded IRQs in the PDC driver to defer
processing the rx DMA ring after getting an rx done interrupt.
Instead, use a tasklet at normal priority for deferred processing.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Use likely/unlikely directives to improve branch prediction.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Remove the unnecessary rmb() from the receive path.
If the rx ring has multiple messages ready, avoid reading
last_rx_curr multiple times from the register.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The PDC driver is a mailbox controller. A mailbox controller
can report that a mailbox message has been "transmitted" either when
a tx interrupt fires or by having the mailbox framework poll. This
commit converts the PDC driver to the poll method. We found that the
tx interrupt happens when the descriptors are read by the SPU hw. Thus,
the interrupt method does not allow more than one tx message in the PDC
tx DMA ring at a time. To keep the SPU hw busy, we would like to keep
the tx ring full under heavy load.
With the poll method, the PDC driver responds that the previous message
has been transmitted if the tx ring has space for another message.
SPU request messages take a variable number of descriptors. If 15
descriptors are available, there is a good chance another message will
fit. Also increased the ring size from 128 to 512 descriptors.
With this change, I found the PDC driver hangs on its spinlock under
heavy load. The PDC spinlock is not required; so I removed it. Calls
to pdc_send_data() are already synchronized because of the channel
spinlock in the mailbox framework. Other references to ring indexes
should not require locking because they only written on either the
tx or rx side.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Minor fix to ensure that debugfs stats pseudo-files are
removed when driver module is unloaded. Previously, the call to
debugfs_remove_recursive() was never being called since the
directory was not empty, and a seg fault would occur if another
process tried to access these leftover files.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Ensure that DMA is disabled, and pointers reset, when changing
DMA base addresses in pdc_ring_init(). This allows a mailbox client
to be re-inserted after being removed. Otherwise, the DMA doesn't
restart so the client hangs while being reinserted.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When creating the debugfs files for the PDC driver, use
octal file permissions rather than symbolic file permissions.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias: platform:mailbox-sti
After this patch:
$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias: platform:mailbox-sti
alias: of:N*T*Cst,stih407-mailboxC*
alias: of:N*T*Cst,stih407-mailbox
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
$
After this patch:
$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
alias: of:N*T*Cmailbox-testC*
alias: of:N*T*Cmailbox-test
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Driver updates for ARM SoCs, including a couple of newly added drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip
it is running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system controller
- A new checking module for the ARM "PSCI" (not to be confused
with "SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their
power management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra
bpmp interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates.
Conflicts:
- ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
- drivers/soc/renesas/Makefile: multiple files got added, keep
all in logical sorting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6dP8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, including a couple of newly added
drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip it is
running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system
controller
- A new checking module for the ARM "PSCI" (not to be confused with
"SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their power
management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
misc: sram: remove useless #ifdef
drivers: psci: Allow PSCI node to be disabled
drivers: psci: PSCI checker module
soc: renesas: Identify SoC and register with the SoC bus
firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
firmware: qcom: scm: Remove core, iface and bus clocks dependency
dt-bindings: firmware: scm: Add MSM8996 DT bindings
memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
ARM: shmobile: Document DT bindings for Product Register
soc: renesas: rcar-sysc: add R8A7745 support
reset: Add Tegra BPMP reset driver
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
dt-bindings: Add power domains to Tegra BPMP firmware
firmware: tegra: Add BPMP support
firmware: tegra: Add IVC library
dt-bindings: firmware: Add bindings for Tegra BPMP
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
mailbox: Add Tegra HSP driver
firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
...
We have to use the _safe version of list_for_each() because we're
freeing the pointer as we go along. (This might not show up testing
depending on what config options you have enabled).
Fixes: 0fe88461a0 ("mailbox: Add Tegra HSP driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver exposes a mailbox interface for interprocessor communication
using the Hardware Synchronization Primitives (HSP) module's doorbell
mechanism. There are multiple HSP instances and they provide additional
features such as shared mailboxes, shared and arbitrated semaphores.
A driver for a remote processor can use the mailbox client provided by
the HSP driver and build an IPC protocol on top of this synchronization
mechanism.
Based on work by Joseph Lo <josephl@nvidia.com>.
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
* acpi-x86:
x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
x86: ACPI: remove extraneous white space after semicolon
* acpi-cppc:
ACPI / CPPC: Support PCC with interrupt flag
ACPI / CPPC: Add prefix cppc to cpudata structure name
ACPI / CPPC: Add support for functional fixed hardware address
ACPI / CPPC: Don't return on CPPC probe failure
ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config
ACPI / CPPC: check for error bit in PCC status field
ACPI / CPPC: move all PCC related information into pcc_data
ACPI / CPPC: add sysfs support to compute delivered performance
ACPI / CPPC: set a non-zero value for transition_latency
ACPI / CPPC: support for batching CPPC requests
ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace
ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops
mailbox: pcc: Support HW-Reduced Communication Subspace type 2
* acpi-soc:
ACPI / APD: constify local structures
ACPI / APD: Add device HID for Vulcan SPI controller
Add Message-Handling-Unit driver for platform variants as mailbox controller.
Actually, only the Amlogic Meson GXBB SoC MHU is supported.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
ACPI 6.1 has a PCC HW-Reduced Communication Subspace type 2 intended for
use on HW-Reduce ACPI Platform, which requires read-modify-write sequence
to acknowledge doorbell interrupt. This patch provides the implementation
for the Communication Subspace Type 2.
Signed-off-by: Hoan Tran <hotran@apm.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We get 2 warnings when biuld kernel with W=1:
drivers/mailbox/bcm-pdc-mailbox.c:472:6: warning: no previous prototype for 'pdc_setup_debugfs' [-Wmissing-prototypes]
drivers/mailbox/bcm-pdc-mailbox.c:488:6: warning: no previous prototype for 'pdc_free_debugfs' [-Wmissing-prototypes]
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
We can't pass NULL pointers to pdc_ring_free() so I moved the check for
NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX to avoid link
error on some platforms.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Rob Rice <rrice@broadcom.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix format and type mismatches in a couple debug prints in the
Broadcom PDC driver. Use %pad for dma_addr_t and %pa for
resource_size_t.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Broadcom PDC mailbox driver is a mailbox controller that
manages data transfers to and from one or more offload engines.
Signed-off-by: Rob Rice <rob.rice@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The use of __raw IO accesors is not endian safe and should be used
sparingly. The relaxed variants should be as lightweight and also
are endian safe.
Note, this has not been run-time tested.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
tdev->signal is not set NULL after it's freed. This will cause random
exceptions when the stale pointer is accessed after tdev->signal is
freed. Also, since tdev->signal allocation is skipped the next time
it's written, this leads to continuous fault finally leading to the
total death of the system.
Fixes: d1c2f87c9a ("mailbox: mailbox-test: Prevent memory leak")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
devm_ioremap_resource returns an ERR_PTR value, not NULL,
on failure.
The Coccinelle semantic patch used to make this change is
as follows:
@@
expression e,e1;
statement S;
@@
*e = devm_ioremap_resource(...);
if (!e1) S
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The omap_mbox_save_ctx() and omap_mbox_restore_ctx() API were
previously provided to OMAP mailbox clients to save and restore
the mailbox context during system suspend/resume. The save and
restore functionality is now implemented through System PM driver
callbacks, and there is no need for these functions, so kill these
API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The OMAP mailbox driver is used by clients to communicate with remote
processors in general. The mailbox clients are expected to have stopped
communicating with these remote processors during a system suspend. The
OMAP mailbox fifos are expected to not have any messages as such. Add a
check for any pending unprocessed messages in the suspend callback, to
detect any communication protocol issues of the mailbox clients. The
system suspend is aborted if any messages are found.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Support has been added to the OMAP mailbox driver to allow it
to work across a system suspend/resume. The OMAP mailbox driver
requires only the interrupt configuration registers to be saved
and restored, and this is done in the suspend/resume callbacks.
The registers need to be saved only if there are active clients
at the time of suspend. The enabling and disabling of the mailbox
clocks is done automatically by the omap_device layer.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The interrupt type used for identifying the layout of the interrupt
configuration registers between OMAP4+ SoCs and older SoCs is stored
only in the sub-mailbox structures for easier access. Store this type
in the the omap_mbox_device structure as well along with the other
global variables. This is being done to facilitate the context save
and restore of appropriate registers during system suspend/resume.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix couple of checkpatch warnings of the type,
"WARNING: Missing a blank line after declarations"
Also, fixed a warning about a space after a typecast
while at this.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Remove the paragraph about writing to the Free Software
Foundation's mailing address from the GPL license header
as this address can change. This fixes the corresponding
checkpatch warning.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix the code formatting to use the kernel preferred style
of using the actual variables to determize the size using
the sizeof() operator. This fixes the corresponding checkpatch
warning as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
OMAP mailbox devices can no longer be created in legacy non-DT
mode, all the relevant code has been cleaned up. The OMAP mailbox
driver will only support devices created from DT going forward,
so drop the legacy platform device support from the driver.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Pull mailbox fixes from Jussi Brar:
"Misc fixes:
mailbox-test driver:
- prevent memory leak and another cosmetic change
mailbox:
- change the returned error code
Xgene driver:
- return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
mailbox: mailbox-test: Prevent memory leak
mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc
In accordance with e15f431fe2 ("errno.h: Improve ENOSYS's comment") and
91c9afaf97 ("checkpatch.pl: new instances of ENOSYS are errors") we're
converting from the old meaning of: ENOSYS "Function not implemented" to
a more standard EINVAL.
Reported-by: Seraphin Bonnaffe <seraphin.bonnaffe@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
If we set the Signal twice or more, without using it as part of a message,
memory will be re-allocated and the pointer over-written. Prevent this
potential leak by only allocating memory when there isn't any already.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
While we're at it, ensure copy-to location is NULL'ed in the error path.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
* pm-cpufreq:
cpufreq: dt: Drop stale comment
cpufreq: intel_pstate: Documenation for structures
cpufreq: intel_pstate: fix inconsistency in setting policy limits
intel_pstate: Avoid extra invocation of intel_pstate_sample()
intel_pstate: Do not set utilization update hook too early
* pm-cpuidle:
intel_idle: Add KBL support
intel_idle: Add SKX support
intel_idle: Clean up all registered devices on exit.
intel_idle: Propagate hot plug errors.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Fix dangling registration on error path.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix a helper function's return value.
intel_idle: remove useless return from void function.
* acpi-cppc:
mailbox: pcc: Don't access an unmapped memory address space
The acpi_pcc_probe() may end up accessing memory outside of the PCCT
table space causing the kernel panic(). Increment the pcct_entry
pointer after parsing 'HW-reduced Communications Subspace' to fix
the problem. This change also enables the parsing of subtable at
index 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more mailbox updates from Jassi Brar:
"Device tree bindings and driver for TI's Message-Manager controller.
Due to some last minute cosmetic changes, the driver was not included
in the first pull request, otherwise the driver has been reviewed
twice"
* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Introduce TI message manager driver
Documentation: dt: mailbox: Add TI Message Manager
Support for TI Message Manager Module. This hardware block manages a
bunch of hardware queues meant for communication between processor
entities.
Clients sitting on top of this would manage the required protocol
for communicating with the counterpart entities.
For more details on TI Message Manager hardware block, see documentation
that will is available here: http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Chapter 8.1(Message Manager)
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The newly added rockchip mailbox driver causes a bug in
the ARM allyesconfig build because of a division of a resource_size_t
variable that may be 64 bit wide:
drivers/mailbox/built-in.o: In function `rockchip_mbox_probe':
:(.text+0x6614): undefined reference to `__aeabi_uldivmod'
This adds a cast to size_t, which turns it into a 32-bit division
in this case. This is safe because we know that we cannot possibly
map a resource that is longer than what a pointer contains, and
in practice it will be very short instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
* acpi-processor:
ACPI / sleep: move acpi_processor_sleep to sleep.c
ACPI / processor : add support for ACPI0010 processor container
ACPI / processor_idle: replace PREFIX with pr_fmt
* acpi-cppc:
ACPI / CPPC: use MRTT/MPAR to decide if/when a req can be sent
ACPI / CPPC: replace writeX/readX to PCC with relaxed version
mailbox: pcc: optimized pcc_send_data
ACPI / CPPC: optimized cpc_read and cpc_write
ACPI / CPPC: Optimize PCC Read Write operations
This driver is found on RK3368 SoCs.
The Mailbox module is a simple APB peripheral that allows both
the Cortex-A53 MCU system to communicate by writing operation to
generate interrupt.
The registers are accessible by both CPU via APB interface.
The Mailbox has the following main features:
1) Support dual-core system: Cortex-A53 and MCU.
2) Support APB interface.
3) Support four mailbox elements, each element includes one data word,
one command word register and one flag bit that can represent
one interrupt.
4) Four interrupts to Cortex-A53.
5) Four interrupts to MCU.
6) Provide 32 lock registers for software to use to indicate whether
mailbox is occupied.
[Jassi: Removed unused variable buf_base]
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
pcc_send_data() can be invoked during the execution of performance
critical code as in cppc_cpufreq driver. With acpi_* APIs, the
doorbell register accessed in pcc_send_data() if present in system
memory will be searched (in cached virt to phys addr mapping),
mapped, read/written and then unmapped. These operations take
significant amount of time.
This patch maps the performance critical doorbell register
during init and then reads/writes to it directly using the
mapped virtual address. This patch + similar changes to CPPC
acpi driver reduce the time per freq. transition from around
200us to about 20us for the CPPC cpufreq driver
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
devm_ioremap() returns NULL, it never returns an ERR_PTR.
Fixes: f700e84f41 ('mailbox: Add support for APM X-Gene platform mailbox driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add driver for Hi6220 mailbox, the mailbox communicates with MCU; for
sending data, it can support two methods for low level implementation:
one is to use interrupt as acknowledge, another is automatic mode which
without any acknowledge. These two methods have been supported in the
driver. For receiving data, it will depend on the interrupt to notify
the channel has incoming message.
Now mailbox driver is used to send message to MCU to control dynamic
voltage and frequency scaling for CPU, GPU and DDR.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch adds support for different MMIO region for Tx and Rx paths.
If only one region is specified, it's assumed to be shared between Rx
and Tx, thereby retaining backward compatibility.
Also in order to support single channel dealing with both Tx and Rx with
dedicated MMIO regions, Tx channel itself is assigned to Rx if MMIO
regions are different and Rx is not specified.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reduce the logging from info to debug. Also use print_hex_dump_bytes
instead as it has support for dynamic printk providing options to
conditionally enable/disable these logs.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Underscores are usually forbidden in the compatible strings. So lets
remove it before the first users of this is seen.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This mailbox-test driver was designed to be generic, so let's remove ST
tag on it and make it generic.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch fixes the calculation of pcc_chan for non-zero id.
After the compiler ignores the (unsigned long) cast the
pcc_mbox_channels pointer is type-cast and then the type-cast
offset is added which results in address outside of the range
leading to the kernel crashing.
We might add braces and make it:
pcc_chan = (struct mbox_chan *)
((unsigned long) pcc_mbox_channels +
(id * sizeof(*pcc_chan)));
but let's go with array approach here and use id as index.
Tested on Juno board.
Signed-off-by: Alexey Klimov <alexey.klimov@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This mbox_chan_ops structure is never modified, so declare it as const,
like all the other mbox_chan_ops structures.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Don't pass mmio region as source to print_hex_dump() and then
again to memcpy_fromio(). Do it once and give print_hex_dump()
the buffer we just read the data in.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
We need to leave space for the NUL char.
Fixes: 8ea4484d0c ('mailbox: Add generic mechanism for testing Mailbox Controllers')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
The mailbox framework controls the transmission queue and requires
either its controller implementations or clients to run the state
machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready
interrupt as the equivalent of a Tx-done interrupt to run this Tx
queue state-machine.
The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload
certain PM tasks, like doing the necessary operations for Device
PM suspend/resume or for entering lower c-states during cpuidle.
The CPUIdle on AM33xx requires the messages to be sent without
having to trigger the Tx-ready interrupts, as the interrupt
would immediately terminate the CPUIdle operation. Support for
this has been added by introducing a DT quirk, "ti,mbox-send-noirq"
and using it to modify the normal OMAP mailbox controller behavior
on the sub-mailboxes used to communicate with the WkupM3 remote
processor. This also requires the wkup_m3_ipc driver to adjust
its mailbox usage logic to run the Tx state machine.
NOTE:
- AM43xx does not communicate with WkupM3 for CPU Idle, so is
not affected by this behavior. But, it uses the same IPC driver
for PM suspend/resume functionality, so requires the quirk as
well, because of changes to the common wkup_m3_ipc driver.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[s-anna@ti.com: revise logic and update comments/patch description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Kbuild test robot reported some Sparse warnings to the tune of:
sparse: incorrect type in argument 6 (different address spaces)
expected void const *buf
got void [noderef] <asn:2>*mmio
This was due to passing variables tagged with the Sparse cookie
'__iomem' through into memcpy() and print_hex_dump() without
adequate protection or casting. These issues were fixed in a
previous patch suppressing the warnings, but the issue is indeed
still present.
This patch fixes the warnings in the correct way, i.e. by using
the purposely authored memcpy_{from,to}io() derivatives in the
memcpy() case and casting the memory address to (void *) and
forcing Sparse to ignore to ignore it in the print_hex_dump()
case [NB: This is also what the memcpy() derivatives do].
Reported-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch deals with a few spelling, white space and type
warnings reported by Intel's Kbuild Test Robot.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This particular Client implementation uses shared memory in order
to pass messages between Mailbox users; however, it can be easily
hacked to support any type of Controller.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
ST's platforms currently support a maximum of 5 Mailboxes, one for
each of the supported co-processors situated on the platform. Each
Mailbox is divided up into 4 instances which consist of 32 channels.
Messages are passed between the application and co-processors using
shared memory areas. It is the Client's responsibility to manage
these areas.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
get_pcc_channel() does not return NULL on error it returns the error code
in ERR_PTR, but we have been checking it for NULL.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Pull mailbox updates from Jassi Brar:
"Mainly we move from jiffy based timer to HRTIMER for finer control
over polling. Then a controller reduces its polling period from 10 to
1ms"
* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: arm_mhu: reduce txpoll_period from 10ms to 1 ms
mailbox: switch to hrtimer for tx_complete polling
mailbox: Drop owner assignment from platform_driver
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore,
Lv Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to
AML method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool
to be built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future
introduction of CPPC support and ACPI PCC mailbox driver
updates (Ashwin Chaugule).
- ACPI interrupts enumeration fix for a regression related
to the handling of IRQ attribute conflicts between MADT
and the ACPI namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael
J Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
(Pan Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it
to preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support
for them in the OPP framework and in the cpufreq-dt driver plus
related OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=fTgI
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"From the number of commits perspective, the biggest items are ACPICA
and cpufreq changes with the latter taking the lead (over 50 commits).
On the cpufreq front, there are many cleanups and minor fixes in the
core and governors, driver updates etc. We also have a new cpufreq
driver for Mediatek MT8173 chips.
ACPICA mostly updates its debug infrastructure and adds a number of
fixes and cleanups for a good measure.
The Operating Performance Points (OPP) framework is updated with new
DT bindings and support for them among other things.
We have a few updates of the generic power domains framework and a
reorganization of the ACPI device enumeration code and bus type
operations.
And a lot of fixes and cleanups all over.
Included is one branch from the MFD tree as it contains some
PM-related driver core and ACPI PM changes a few other commits are
based on.
Specifics:
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to AML
method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool to be
built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future introduction
of CPPC support and ACPI PCC mailbox driver updates (Ashwin
Chaugule).
- ACPI interrupts enumeration fix for a regression related to the
handling of IRQ attribute conflicts between MADT and the ACPI
namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael J
Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it to
preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support for
them in the OPP framework and in the cpufreq-dt driver plus related
OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu)"
* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
cpufreq: speedstep-lib: Use monotonic clock
cpufreq: powernv: Increase the verbosity of OCC console messages
cpufreq: sfi: use kmemdup rather than duplicating its implementation
cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
cpufreq: remove redundant 'policy' field from user_policy
cpufreq: remove redundant 'governor' field from user_policy
cpufreq: update user_policy.* on success
cpufreq: use memcpy() to copy policy
cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
cpufreq: mediatek: Add MT8173 cpufreq driver
dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
PM / Domains: Fix typo in description of genpd_dev_pm_detach()
PM / Domains: Remove unusable governor dummies
PM / Domains: Make pm_genpd_init() available to modules
PM / domains: Align column headers and data in pm_genpd_summary output
powercap / RAPL: disable the 2nd power limit properly
tools: cpupower: Fix error when running cpupower monitor
PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
PM / OPP: Fix static checker warning (broken 64bit big endian systems)
...
PCC is made selectable only by clients which use it. e.g. CPPC
Default it to disabled so that it is not included accidentally on
platforms which dont use it.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change initializes the PCC Mailbox earlier than
the ACPI processor driver. This enables drivers introduced
in follow up patches (e.g. CPPC) to be probed via the ACPI
processor driver interface. The CPPC probe requires the PCC
channel to be initialized for it to query each CPUs performance
capabilities.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the mailbox core users hrtimers now, it can handle much higher
resolutions. We can reduce the txpoll_period to 1 ms as the transmit
usually takes just few microseconds.
Reported-and-suggested-by: Juri Lelli <Juri.Lelli@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The mailbox core uses jiffy based timer to handle polling for the
transmit completion. If the client/protocol have/support notification
of the last packet transmit completion via ACK packet, then we tick the
Tx state machine immediately in the callback. However if the client
doesn't support that mechanism we might end-up waiting for atleast a
jiffy even though the remote is ready to receive the next request.
This patch switches the timer used for that polling from jiffy-based
to hrtimer-based so that we can support polling at much higher time
resolution.
Reported-and-suggested-by: Juri Lelli <Juri.Lelli@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch fix spelling typo inv various part of sources.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KDJO
-----END PGP SIGNATURE-----
Merge tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull module_init replacement part two from Paul Gortmaker:
"Replace module_init with appropriate alternate initcall in non
modules.
This series converts non-modular code that is using the module_init()
call to hook itself into the system to instead use one of our
alternate priority initcalls.
Unlike the previous series that used device_initcall and hence was a
runtime no-op, these commits change to one of the alternate initcalls,
because (a) we have them and (b) it seems like the right thing to do.
For example, it would seem logical to use arch_initcall for arch
specific setup code and fs_initcall for filesystem setup code.
This does mean however, that changes in the init ordering will be
taking place, and so there is a small risk that some kind of implicit
init ordering issue may lie uncovered. But I think it is still better
to give these ones sensible priorities than to just assign them all to
device_initcall in order to exactly preserve the old ordering.
Thad said, we have already made similar changes in core kernel code in
commit c96d6660dc ("kernel: audit/fix non-modular users of
module_init in core code") without any regressions reported, so this
type of change isn't without precedent. It has also got the same
local testing and linux-next coverage as all the other pull requests
that I'm sending for this merge window have got.
Once again, there is an unused module_exit function removal that shows
up as an outlier upon casual inspection of the diffstat"
* tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
x86: perf_event_intel_pt.c: use arch_initcall to hook in enabling
x86: perf_event_intel_bts.c: use arch_initcall to hook in enabling
mm/page_owner.c: use late_initcall to hook in enabling
lib/list_sort: use late_initcall to hook in self tests
arm: use subsys_initcall in non-modular pl320 IPC code
powerpc: don't use module_init for non-modular core hugetlb code
powerpc: use subsys_initcall for Freescale Local Bus
x86: don't use module_init for non-modular core bootflag code
netfilter: don't use module_init/exit in core IPV4 code
fs/notify: don't use module_init for non-modular inotify_user code
mm: replace module_init usages with subsys_initcall in nommu.c
