With the LED backlight changes merged, we still need the dts configured
to have backlight working for droid4. Based on an earlier patch from
Pavel Machek <pavel@ucw.cz>, let's configure the backlight but update
the value range to be more usable.
We have a range of 256 register values split into 8 steps, so we can
generate the brightness levels backwards with:
$ for i in 0 1 2 3 4 5 6 7; do echo "255 - ${i} * (256 / 8)" | bc; done
To avoid more confusion why the LCD backlight is still not on, let's
also enable LED backlight as a loadable module for omap2plus_defconfig.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All modules built from exynos_defconfig occupy about 55M, so enable
squashfs filesystem support and increase default ram block device size
to 32M to enable deploying them on initrd. Such initrd, using squashfs
requires at least 24M.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Computer on module Colibri iMX7S/iMX7D has
an AD7879 touchscreen controller.
This patch enables the TOUCHSCREEN_AD7879 and TOUCHSCREEN_AD7879_I2C
which support the mentioned controller in i2c mode.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Toradex iMX6/iMX7-based modules and boards support LCDs
with an MicroChip ATMXT1066T2 touchscreen controller.
This patch enables the TOUCHSCREEN_ATMEL_MXT which supports
MXT-series controllers, including the ATMXT1066T2.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Broadcom bluetooth options and serial bus in order to support
Bluetooth on the Nexus 5 phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20200129232031.34538-2-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Many sunxi based board needs CONFIG_SUN8I_THERMAL for thermal support.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
CONFIG_MMC_BLOCK_BOUNCE is gone since commit c3dccb74be ("mmc: core:
Delete bounce buffer Kconfig option").
CONFIG_LBDAF is gone since commit 72deb455b5 ("block: remove
CONFIG_LBDAF").
CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since
commit f382fb0bce ("block: remove legacy IO schedulers").
The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).
The IOSCHED_BFQ seems to replace IOSCHED_CFQ so select it in configs
previously choosing the latter.
CONFIG_CROSS_COMPILE is gone since commit f1089c92da ("kbuild: remove
CONFIG_CROSS_COMPILE support").
Link: https://lore.kernel.org/r/20200130195525.4525-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=8F5r
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
arm64: defconfig: Enable Broadcom's GENET Ethernet controller
ARM: multi_v7_defconfig: Enable devfreq thermal integration
ARM: exynos_defconfig: Enable devfreq thermal integration
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
arm64: defconfig: Enable Actions Semi specific drivers
arm64: defconfig: Enable Broadcom's STB PCIe controller
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
ARM: configs: at91: enable config flags for sam9x60 SoC
ARM: configs: at91: use savedefconfig
arm64: defconfig: Enable tegra XUDC support
ARM: defconfig: gemini: Update defconfig
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: Enable HFPLL
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
arm64: defconfig: Enable ATH10K_SNOC
...
This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com
1. Bring back explicitly wanted options which were removed through
`make savedefconfig`. savedefconfig removes options selected by
other symbol, however developers of this other symbol can remove
anytime 'select' statement.
2. Enable NFS v4.1 and v4.2, useful in testing/CI systems.
3. Enable thermal throttling through devfreq framework.
-----BEGIN PGP SIGNATURE-----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=d+tH
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.6
1. Bring back explicitly wanted options which were removed through
`make savedefconfig`. savedefconfig removes options selected by
other symbol, however developers of this other symbol can remove
anytime 'select' statement.
2. Enable NFS v4.1 and v4.2, useful in testing/CI systems.
3. Enable thermal throttling through devfreq framework.
* tag 'samsung-defconfig-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable devfreq thermal integration
ARM: exynos_defconfig: Enable devfreq thermal integration
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Bring back explicitly wanted options
Link: https://lore.kernel.org/r/20200120180227.9061-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add pit64 and sdhci support for at91_dt
-----BEGIN PGP SIGNATURE-----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=wXIy
-----END PGP SIGNATURE-----
Merge tag 'at91-5.6-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.6 #2
- Add pit64 and sdhci support for at91_dt
* tag 'at91-5.6-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
Link: https://lore.kernel.org/r/20200119235223.GA92283@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
Panfrost driver provides a devfreq driver for the Mali GPU and allows to
scale GPU core frequency. Enable support for devfreq thermal integration
to enable cooling of GPU thermal zone by reducing GPU core frequency.
This fixes following warning during boot on Exynos5422-based Odroid XU4:
panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Panfrost driver provides a devfreq driver for the Mali GPU and allows to
scale GPU core frequency. Enable support for devfreq thermal integration
to enable cooling of GPU thermal zone by reducing GPU core frequency.
This fixes following warning during boot on Exynos5422-based Odroid XU4:
panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
NFS is widely used in debugging and Continuous Integration systems, so
enable the newest versions of protocol: v4.1 and v4.2.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
NFS is widely used in debugging and Continuous Integration systems, so
enable the newest versions of protocol: v4.1 and v4.2.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4b4oUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7iqQgAm/j9aO61exErck4aI9+krqrLnF3w
eWgrrovPEwSARQo69bTAGK5GYjaZ4yGlDiH3Qk6TS5pvcRsEjaxsu/Ym/KVDtOBM
iiLD9MbI7w8Nd5pe4jBkCHF6ZOEWbMvzwc8zStM/RwTVvwajdkW/p1If4RQGEqmM
ZcMgXLcQneqWAbCsFDziAwsf6kfOhOghW3CNQ63GuGZc4UFRv8j056mBlG8PDeLL
4UbT+rI1xwwatNg9a2/E0HfA3Z4eJg1YbjMTrEx4NDkDel2Sz9GuVxJIY1+/lDKs
DCw4n1Fzfn4nxR8Eak7foQPY27VLgDqa6zM06QYhQXE3wWt2HumxJNQkmQ==
=H+6R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.6:
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
ARM: configs: imx_v6_v7_defconfig: enable USB ACM
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_ILI210X
Link: https://lore.kernel.org/r/20200113034006.17430-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the driver for STM32 PWR regulators found on stm32mp1.
Link: https://lore.kernel.org/r/20200109125531.13610-1-alexandre.torgue@st.com
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable support for the display panel on the iwg20d board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXhMDegAKCRCKwlD9ZEnx
cIIvAQCfEELGg/5vz7r3iemrUfIHxWq8YkfWsg5UnnMQ0f11QgD9HMfJSO4XebkY
JLsr3JV3XzkrIAGgssxpRwO2EV0BNAo=
=xQC4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.6
- Enable support for the display panel on the iwg20d board.
* tag 'renesas-arm-defconfig-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Enable support for panels from EDT
ARM: shmobile: defconfig: Restore debugfs support
Link: https://lore.kernel.org/r/20200106104857.8361-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devices:
- Move some symbols around due to Kconfig alterations,
this affects CONFIG_PREEMPT, CONFIG_PCI, CONFIG_CMA,
CONFIG_BINFMT_MISC, CONFIG_PARTITION_ADVANCED.
- Add RedBoot partition parsing, as all the Gemini
devices use some RedBoot derivative and store their
flash partition tables in this format.
- Enable bridge and VLAN filtering: a majority of the
Gemini devices have some kind of DSA chip for ethernet
bridging/routing.
- Enable CONFIG_NET_DSA_REALTEK_SMI as this DSA router
chip is found in the Gemini-based products. This makes
explicit selection of CONFIG_REALTEK_PHY unnecessary
so that goes away.
- Enable CONFIG_TUN since Gemini userspace often make
use of the TUN interface for network services.
- Enable MARVELL_PHY as Marvell PHY connectors are often
found in Gemini systems.
- Enable basic 802.11 libraries as many Gemini systems
have wireless PCI cards.
Link: https://lore.kernel.org/r/20200101143520.14218-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Some boards like imx51-babbage, imx53-cx9020 and imx6q-utilite-pro
have a TFP410 DVI bridge chip.
Select its driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable NFS_V4_1 and NFS_V4_2 to support NFS servers providing that
protocol.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This activates the device tree-based cpufreq driver that
Ux500 is using and enables the schedutil and ondemand
governors with schedutil as default. This works fine in
the setups I have tested.
Link: https://lore.kernel.org/r/20191217202648.23206-1-linus.walleij@linaro.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
-----BEGIN PGP SIGNATURE-----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=xoio
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v5.5
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
* tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Restore debugfs support
MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry
MAINTAINERS: Update Lukasz Luba's email address
Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Restore debugfs support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXfObQQAKCRCKwlD9ZEnx
cGLCAP9uIY5rCoFPD6KdQMfM/Gk5Q9Li4UHlJrjVWe927W3dMAEA66yIbVCjWFUo
h8aqYuTK5ZUOzrlGESFuSDlWBqWhjww=
=bN4i
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.5
- Restore debugfs support
* tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Restore debugfs support
Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
-----BEGIN PGP SIGNATURE-----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=3muQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants for v5.5-rc1 cycle
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
* tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing reset delay handling
ARM: dts: am437x-gp/epos-evm: fix panel compatible
ARM: omap2plus_defconfig: Add back DEBUG_FS
ARM: omap2plus_defconfig: enable NET_SWITCHDEV
ARM: dts: am335x-sancloud-bbe: fix phy mode
bus: ti-sysc: Fix missing force mstandby quirk handling
Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The iwg20d comes with an LCD panel from Emerging Display
Technologies Corporation (EDT), therefore enable what's
required to support it.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1573660292-10629-12-git-send-email-fabrizio.castro@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks
booting Debian 9, as systemd needs debugfs:
[FAILED] Failed to mount /sys/kernel/debug.
See 'systemctl status sys-kernel-debug.mount' for details.
[DEPEND] Dependency failed for Local File Systems.
...
You are in emergGive root password for maintenance
(or press Control-D to continue):
Fix this by enabling CONFIG_DEBUG_FS explicitly.
See also commit 18977008f4 ("ARM: multi_v7_defconfig: Restore
debugfs support").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
This is currently off and that's not desirable: default imx config is
meant to be generally useful for development and debugging.
Running git bisect between v5.4 and v5.5-rc1 finds this started from
commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
Explicit CONFIG_DEBUG_FS=y was earlier removed by
commit c29d541f59 ("ARM: imx_v6_v7_defconfig: Remove unneeded options")
A very similar fix was required before:
commit 7e9eb62688 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Few options KALLSYMS_ALL, SCSI, PM_DEVFREQ and mutex/spinlock debugging
were removed with savedefconfig because they were selected by other
options. However these are user-visible options and they might not be
selected in the future. Exactly this happened with commit 0e4a459f56
("tracing: Remove unnecessary DEBUG_FS dependency") removing the
dependency between DEBUG_FS and TRACING.
To avoid losing these options in the future, explicitly mention them in
defconfig.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
It is used for USB CDC ACM function.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the Analogix anx78xx driver so that the external display over HDMI
can be used on Nexus 5 phones.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20191024103140.10077-3-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add interconnect support for msm8974-based SoCs in order to support the
GPU on this platform.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20191024103140.10077-2-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select
NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required
to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig.
Fixes: 3727d259dd ("arm: omap2plus_defconfig: enable new cpsw switchdev driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 9f532d26c7 ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.
In meantime, commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The imx6q-logicpd board supports an LCD with an ili2117
touchscreen controller.
This patch enables the TOUCHSCREEN_ILI210X which will support
the ili2117.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit fd7d58f0db ("ARM: multi_v7_defconfig: renormalize based on recent
additions") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which were enabled by CONFIG_PERF_EVENTS.
In meantime, commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
Pull sysctl system call removal from Eric Biederman:
"As far as I can tell we have reached the point where no one enables
the sysctl system call anymore. It still is enabled in a few
defconfigs but they are mostly the rarely used one and in asking
people about that it was more cut & paste enabled than anything else.
This is single commit that just deletes code. Leaving just enough code
so that the deprecated sysctl warning continues to be printed. If my
analysis turns out to be wrong and someone actually cares it will be
easy to revert this commit and have the system call again.
There was one new xtensa defconfig in linux-next that enabled the
system call this cycle and when asked about it the maintainer of the
code replied that it was not enabled on purpose. As of today's
linux-next tree that defconfig no longer enables the system call.
What we saw in the review discussion was that if we go a step farther
than my patch and mess with uapi headers there are pieces of code that
won't compile, but nothing minds the system call actually disappearing
from the kernel"
Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sysctl: Remove the sysctl system call
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.
As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add CONFIG_TI_CPSW_SWITCHDEV option to enable new cpsw switchdev driver
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
-----BEGIN PGP SIGNATURE-----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=/4iy
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED device tree updates for 5.5
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
can run on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run
on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR.
Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400
systems.
The remaining changes are cleanups from regenerating the defconfig.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These are recently merged drivers for ASPEED systems.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Unselect PIT now that the TCBs can be used at boot time
-----BEGIN PGP SIGNATURE-----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=IDSp
-----END PGP SIGNATURE-----
Merge tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.5
- Unselect PIT now that the TCBs can be used at boot time
* tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: unselect PIT
Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable OCMEM support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2pjn
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.5
* Enable OCMEM support
* tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add ocmem support
Link: https://lore.kernel.org/r/1573068840-13098-3-git-send-email-agross@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwYuhAAoJEFBXWFqHsHzO+tcH/RmEkt5uueRqM++I56F7Kmc9
80I2pMUbCXln2rjWXEP29OE1h4pKtimfwtEoQvtRX8DOhCFT+CCxsj9JqMZAEnxp
WrCC6GbNAYG+Geje6HAVy7mr2mFD4KXwcc/TLjV2fk3MpuEcsYLuEL/t+wqnKw/W
IabyG0v/CZfp1fkX5FIkpmI770WzOs5kzfIGTnJ9GEJtj/omZYPXK605GSDSWovJ
XX2iI2wFmLy8/KO9enhGQjSzZQyOZce/cyqCG4YGdWSHQzJE9zBP207EHZqEB21b
g+5VzYbM75WmAt0TL+2K3ZzuOKVKZeDpY6KQTz02rTfIRZ4sieY6l9+i/ECtAgY=
=w4CK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.
-----BEGIN PGP SIGNATURE-----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=ziJD
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.5-rc1
Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.
* tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
multiple boards, one for the new crypto driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXb2ovAAKCRDj7w1vZxhR
xfeOAP9peTfpsETYjozV4ZmKKzoMS/+KtKtPw16i+W+cgMezDQEA3e7JtpL1oC/P
qYgJVeOB2m6dHXuZj3xZEabglbP5pA4=
=MhwW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two new drivers enabled in sunxi_defconfig: one for the PHY found on
multiple boards, one for the new crypto driver.
* tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable MICREL_PHY
ARM: configs: sunxi: add new Allwinner crypto options
Link: https://lore.kernel.org/r/27125172-7ce8-427e-83f9-8e9bd69d50a4.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
- Refresh shmobile_defconfig for v5.4-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxCFgAKCRCKwlD9ZEnx
cJ0/AQCLLQVNK2ZIO0uOJV1KuFNVBbLbOorFi8YRkRY2GPIkiwEAiwSARu7Daz//
M24hs05l3DkfDwhKBj9z1I2EM/DVyAk=
=hEYM
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.5
- Refresh shmobile_defconfig for v5.4-rc1.
* tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.4-rc1
Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the defconfig for Renesas ARM boards:
- Drop CONFIG_ARM_ERRATA_754322=y (auto-enabled since commit
2eced4607a ("soc: renesas: Enable ARM_ERRATA_754322 for
affected Cortex-A9")),
- Drop CONFIG_MTD_M25P80=y (removed in commit b35b9a1036 ("mtd:
spi-nor: Move m25p80 code in spi-nor.c")),
- Drop CONFIG_LCD_CLASS_DEVICE=n (no longer auto-enabled since commit
bcd69da98e ("video: backlight: Drop default m for
{LCD,BACKLIGHT_CLASS_DEVICE}")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191025135325.32242-1-geert+renesas@glider.be
Include support for Micrel KSZ9031 PHY driver in sunxi_defconfig,
which fixes issues of link not coming up at boot time with
certain link partners.
Micrel KSZ9031 PHY chip is used on Olimex A20-OLinuXino-LIME2
boards.
The errata fix itself has been implemented in commit
"3aed3e2a143c96: net: phy: micrel: add Asym Pause workaround"
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This patch adds the new Allwinner crypto configs to sunxi_defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The video decoder driver was tested by time and works absolutely fine.
The reason why it is in staging is because it doesn't provide common V4L
interface yet, this shouldn't stop driver enabling in the defconfig since
our userspace (libvdpau-tegra) provides combined acceleration of decoding
and displaying without use of V4L.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CONFIG_TOUCHSCREEN_DA9052 option, so that touchscreen
can be functional by default on imx53-qsb.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog
regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner
(phy regulators, PMU removal on A64, etc).
-----BEGIN PGP SIGNATURE-----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=Jy/6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc
no-watchdog regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA),
Allwinner (phy regulators, PMU removal on A64, etc)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
MAINTAINERS: Update the Spreadtrum SoC maintainer
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
bus: ti-sysc: Fix watchdog quirk handling
ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
mailmap: Add Simon Arlott (replacement for expired email address)
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
...
This commits enable (as module):
- STM32 SAI and I2S configs used on stm32mp157.
- Cirrus CS42L51 audio codec for stm32mp157a-dk1 board.
- Audio graph card support for stm32mp157a-dk1 board.
Link: https://lore.kernel.org/r/20191025125632.11057-1-alexandre.torgue@st.com
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
A series of changes from Adam Ford to update for removed and moved items,
and then enable crypto devices and MT9P031 video as loadable modules.
Looks like I missed unifying the subject line for one commit, but I did
not want to mess with the commit after pushing it out.
-----BEGIN PGP SIGNATURE-----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=f4PV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omap2plus_defconfig for v5.5
A series of changes from Adam Ford to update for removed and moved items,
and then enable crypto devices and MT9P031 video as loadable modules.
Looks like I missed unifying the subject line for one commit, but I did
not want to mess with the commit after pushing it out.
* tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
configs: omap2plus: Enable VIDEO_MT9P031 module
ARM: omap2plus_defconfig: Enable HW Crypto engine modules
ARM: omap2plus_defconfig: Update for moved item
ARM: omap2plus_defconfig: Update for removed items
Link: https://lore.kernel.org/r/pull-1571853258-16998@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
-----BEGIN PGP SIGNATURE-----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=n/vc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use level interrupt for omap4 & 5 wlcore
ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
ARM: dts: omap5: fix gpu_cm clock provider name
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The Logic PD Torpedo Development Kit supports a Leopard Imaging
camera based on the Aptina MT9P031 sensor.
This patch enables this to be built as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig
for no good reasons. Enable the DT-based boards along with modules for
their peripherals.
Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
======================
* fix GPIO backlight support on DA850 by enabling the needed config
in davinci_all_defconfig. This is a fix because the driver and board
support got converted to use BACKLIGHT_GPIO driver, but defconfig update
is still missing in v5.4.
* fix for McBSP DMA on DM365
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Swww
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes
DaVinci fixes for v5.4
======================
* fix GPIO backlight support on DA850 by enabling the needed config
in davinci_all_defconfig. This is a fix because the driver and board
support got converted to use BACKLIGHT_GPIO driver, but defconfig update
is still missing in v5.4.
* fix for McBSP DMA on DM365
* tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Re-enable SNVS power key for imx6q-logicpd board which was accidentally
disabled by a SoC level change.
- Fix I2C switches on vf610-zii-scu4-aib board by specifying property
i2c-mux-idle-disconnect.
- A fix on imx-scu API that reads UID from firmware to avoid kernel NULL
pointer dump.
- A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock.
- A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option
explicitly into imx_v6_v7_defconfig.
- Fix ARM regulator states issue for zii-ultra board, which is impacting
stability of the board.
- A correction on CPU core idle state name for LayerScape LX2160A SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdqHcmAAoJEFBXWFqHsHzOIqAIAJXqhCpbQkP5orCfXdFQxlvb
KpBiK0VEatMwPYAEm19Ij7/raFv+lRGIDo9ZyD9YGyDDIvOvRrSyeqDJCJSTEkol
QwTYl0KSNp2I4D7a0urcO4xMvcJt2QD2k3oe1Pe5mMDn5jbiMHAguUqrH96j/7zv
/9BE4n8aL9YBk6RE86YX0WMoDSfxToVQO+RQJ+7Yg66M83/9oUY3XqGv3svvZMD2
jsYtuHw8ounthr1OJSqcjUPTPLOCoEF+cG9HSkNmMCcShKNZ2wXIzvjeuBOdblKZ
MXnImEse4p7+81rsarGZLfj10tsfam4OibsgFqDIkgsT/aOdsOvXpjfp4/aO46Y=
=DFFA
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.4:
- Re-enable SNVS power key for imx6q-logicpd board which was accidentally
disabled by a SoC level change.
- Fix I2C switches on vf610-zii-scu4-aib board by specifying property
i2c-mux-idle-disconnect.
- A fix on imx-scu API that reads UID from firmware to avoid kernel NULL
pointer dump.
- A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock.
- A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option
explicitly into imx_v6_v7_defconfig.
- Fix ARM regulator states issue for zii-ultra board, which is impacting
stability of the board.
- A correction on CPU core idle state name for LayerScape LX2160A SoC.
* tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
arm64: dts: zii-ultra: fix ARM regulator states
soc: imx: imx-scu: Getting UID from SCU should have response
Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
-----BEGIN PGP SIGNATURE-----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=n/vc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use level interrupt for omap4 & 5 wlcore
ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
ARM: dts: omap5: fix gpu_cm clock provider name
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
DA850 EVM has been converted to use GPIO backlight device
for display backlight GPIO control.
Enable the GPIO backlight module in davinci_all_defconfig
to keep backlight support working.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: edits to commit message for context]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The PIT is not required anymore to successfully boot and may actually harm
in case preempt-rt is used because the PIT interrupt is shared.
Disable it so the TCB clocksource is used.
Link: https://lore.kernel.org/r/20191009194814.15034-1-alexandre.belloni@bootlin.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since commit 2eba69071b ("drm/msm: Remove Kconfig default") the
CONFIG_DRM_MSM option is no longer selected by default on i.MX5.
Explicitly select CONFIG_DRM_MSM so that we can get GPU support
by default on i.MX51 and i.MX53.
Fixes: 2eba69071b ("drm/msm: Remove Kconfig default")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some imx chips (6sll, 6ulz, 7ulp) don't have ethernet support and only a
limited number of USB controllers. For such cases NXP suggests
configuring the USB controller as an ethernet gadget for network boot
testing.
Set USB_CONFIGFS to be built into the kernel so that we can configure
the ethernet gadget without needing modules.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for years
as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXaH78w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk7mACgygFyLQ6GRUTTnGDcohZu44cuMO4AnR/MTrRq
/jiXPRUMsltMV7DHcq+S
=QX4p
-----END PGP SIGNATURE-----
Merge tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for
years as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues"
* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
USB: yurex: fix NULL-derefs on disconnect
USB: iowarrior: use pr_err()
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: chaoskey: fix use-after-free on release
USB: adutux: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: legousbtower: fix use-after-free on release
usb: cdns3: Fix for incorrect DMA mask.
usb: cdns3: fix cdns3_core_init_role()
usb: cdns3: gadget: Fix full-speed mode
USB: usb-skeleton: drop redundant in-urb check
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: dwc3: Remove dev_err() on platform_get_irq() failure
usb: dwc3: Switch to platform_get_irq_byname_optional()
...
Enable devfreq events along with drivers for scaling frequency and
voltages of Exynos buses and Dynamic Memory Controller (DMC). This
usually brings energy saving benefits.
So far devfreq was disabled because it was causing hangs during system
reboot (voltage not matching reset frequency). This was already fixed.
Occasionally, devfreq might negatively impact performance of certain SoC
blocks, e.g. when a bus is scaled down but some block (like Mixer with
two Full HD windows) wants to perform high-throughput DMA operations.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sync with exynos_defconfig and enable following options for Samsung
Exynos SoC based boards:
1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller,
used for example on Exynos5433 (if booted in 32-bit mode),
2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs,
3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on
Exynos5260 RexNos REX-RED board,
4. SND_SOC_ARNDALE: sound support on Arndale boards,
5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,,
6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers
for handling micro USB on mobile Samsung boards (Trats, Trats2,
Rinato),
7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and
SMDK5250 boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add ocmem driver that's needed for some a3xx and a4xx based systems.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.
Support for the kernel driver was removed from the upstream utilities
in 2008:
943f624ab7
Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The general-purpose OMAP3530, OMAP3630, and DM3730 have hardware
crypto engines that appear to be functional despite limited
documentation.
This patch enables them as modules.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When running make savedefconfig ARCH=arm, CONFIG_DMA_CMA
changed location. To help facilitate future changes to
omap2plus_defconfig, this patch re-syncs the omap2plus file
with the updated location generated by make savedefconfig.
No items were removed or added during this patch.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap panel-dpi driver was removed in
Commit 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
The tFP410 and DVI connector was remove in
Commit be3143d8b2 ("drm/omap: Remove TFP410 and DVI connector drivers")
This patch removes these items from the omap2plus_defconfig.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The old omapdrm panels got removed for v5.4 in favor of generic panels,
and the Kconfig options changed. Let's update omap2plus_defconfig
accordingly so the same panels are still enabled.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:
- The recent ti-sysc interconnect target module driver changes had
incorrect clock bits for both clocks and dts that cause warnings
- For omap3-gta04, gpio changes caused the LCD to break a while back,
and after discussing things the right fix is to set spi-cs-high
- Recent omapdrm changes to use generic panels caused tfp410 to be
disabled as we now must enable the generic support for it in
defconfig
- Recent omapdrm and backlight changes also finally made droid4 LCD
to work, so let's enable it in the defconfig it can be used out
of the box. This is not strictly a fix, but we still also have the
older CONFIG_MFD_TI_LMU options available so this cuts down the
confusion for trying to guess which display and which backlight
is needed
- Recent ti-sysc interconnect target module changes need the gpio
module disabled on some boards, but this now needs to happen at
the module level, not at the gpio driver level
- Recent changes to probe system timers with ti-sysc caused warnings
about mismatch in syconfig registers, so let's configure the option
for RESET_STATUS as available in the TRMs
- Recent changes to probe LCDC with ti-sysc caused warnings about
mismatch in sysconfig registers, so let's configure the missing
idlemodes for both platform data and dts as documented in TRMs
- Since we moved mach-omap2 to probe with device tree, we've been
getting voltage controller warnings. Turns out this code is no
longer needed, so let's just remove omap2_set_init_voltage() to
get rid of the pointless warnings
- Configure am4372 dispc memory bandwidth to avoid underflow errors
-----BEGIN PGP SIGNATURE-----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=SkMF
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:
- The recent ti-sysc interconnect target module driver changes had
incorrect clock bits for both clocks and dts that cause warnings
- For omap3-gta04, gpio changes caused the LCD to break a while back,
and after discussing things the right fix is to set spi-cs-high
- Recent omapdrm changes to use generic panels caused tfp410 to be
disabled as we now must enable the generic support for it in
defconfig
- Recent omapdrm and backlight changes also finally made droid4 LCD
to work, so let's enable it in the defconfig it can be used out
of the box. This is not strictly a fix, but we still also have the
older CONFIG_MFD_TI_LMU options available so this cuts down the
confusion for trying to guess which display and which backlight
is needed
- Recent ti-sysc interconnect target module changes need the gpio
module disabled on some boards, but this now needs to happen at
the module level, not at the gpio driver level
- Recent changes to probe system timers with ti-sysc caused warnings
about mismatch in syconfig registers, so let's configure the option
for RESET_STATUS as available in the TRMs
- Recent changes to probe LCDC with ti-sysc caused warnings about
mismatch in sysconfig registers, so let's configure the missing
idlemodes for both platform data and dts as documented in TRMs
- Since we moved mach-omap2 to probe with device tree, we've been
getting voltage controller warnings. Turns out this code is no
longer needed, so let's just remove omap2_set_init_voltage() to
get rid of the pointless warnings
- Configure am4372 dispc memory bandwidth to avoid underflow errors
* tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372: Set memory bandwidth limit for DISPC
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
ARM: OMAP2+: Add missing LCDC midlemode for am335x
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
ARM: dts: Fix gpio0 flags for am335x-icev2
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
ARM: dts: Fix wrong clocks for dra7 mcasp
clk: ti: dra7: Fix mcasp8 clock bits
Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable audio driver for Exynos5250 based Arndale boards to improve
testing coverage.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable driver for Exynos5422 Dynamic Memory Controller supporting
dynamic frequency and voltage scaling in Exynos5422 SoCs.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 6334150e9a ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.
So fix the configs to have CONFIG_REMOTEPROC built in.
Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e9a ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Will Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: Olof Johansson <olof@lixom.net>
A few fixes that have trickled in through the merge window:
- Video fixes for OMAP due to panel-dpi driver removal
- Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
- Fixing arch version on ASpeed ast2500
- Two fixes for reset handling on ARM SCMI
-----BEGIN PGP SIGNATURE-----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=s4qF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes that have trickled in through the merge window:
- Video fixes for OMAP due to panel-dpi driver removal
- Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
- Fixing arch version on ASpeed ast2500
- Two fixes for reset handling on ARM SCMI"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: aspeed: ast2500 is ARMv6K
reset: reset-scmi: add missing handle initialisation
firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Fixes for omap variants
Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.
And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.
* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Droid4 needs USB option serial driver for modem, and lm3532 for the
LCD backlight.
Note that the LCD backlight does not yet get enabled automatically,
but needs to be done manually with:
# echo 50 > /sys/class/leds/lm3532::backlight/brightness
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TFP410 driver was removed but the replacement driver was
never enabled. This patch enableds the DRM_TI_TFP410
Fixes: be3143d8b2 ("drm/omap: Remove TFP410 and DVI connector drivers")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As usual, a bunch of commits, mostly adding drivers and other
options to defconfigs after the code was merged through another
tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=S1hW
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs after the code was merged through another tree"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: defconfig: Enable Qualcomm QUSB2 PHY
arm64: defconfig: Enable the EFI Framebuffer
arm64: defconfig: Enable Qualcomm GENI based I2C controller
ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in
arm64: defconfig: Enable CPU clock drivers for Qualcomm msm8916
arm64: defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: configs: aspeed_g5: Enable AST2600
ARM: configs: multi_v7: Add ASPEED G6
arm64: defconfig: Enable SM8150 GCC and pinctrl driver
arm64: defconfig: Enable CONFIG_ACPI_APEI_PCIEAER
arm64: defconfig: Enable the DesignWare watchdog
ARM: multi_v7_defconfig: Enable SPI_STM32_QSPI support
ARM: imx_v6_v7_defconfig: Enable the PSCI CPUidle driver
arm64: defconfig: Enable the PSCI CPUidle driver
arm64: defconfig: Enable Sun4i SPDIF module
ARM: exynos_defconfig: Enable AHCI-platform SATA driver
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
...
Add modifications necessary to make davinci part of the ARM v5
multiplatform build.
Move the arch-specific configuration out of arch/arm/Kconfig and
into mach-davinci/Kconfig. Remove the sub-menu for DaVinci
implementations (they'll be visible directly under the system type.
Select all necessary options not already selected by ARCH_MULTI_V5.
Update davinci_all_defconfig. Explicitly include the mach-specific
headers in mach-davinci/Makefile.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When the panel-dpi driver was removed, the simple-panels driver
was never enabled, so anyone who used the panel-dpi driver lost
video, and those who used it inconjunction with simple-panels
would have to manually enable CONFIG_DRM_PANEL_SIMPLE.
This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same
way the deprecated panel-dpi was.
Fixes: 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
1. Enable AHCI platform driver on exynos defconfig for Exynos5250-based
Arndale board,
2. Make Max77802 PMIC regulator driver a built-in on multi_v7 defconfig
as it is essential early during boot.
-----BEGIN PGP SIGNATURE-----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=30RN
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.4
1. Enable AHCI platform driver on exynos defconfig for Exynos5250-based
Arndale board,
2. Make Max77802 PMIC regulator driver a built-in on multi_v7 defconfig
as it is essential early during boot.
* tag 'samsung-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in
ARM: exynos_defconfig: Enable AHCI-platform SATA driver
Link: https://lore.kernel.org/r/20190904175002.10487-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add DRM_MSM to ARCH_QCOM defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0xTo
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.4
* Add DRM_MSM to ARCH_QCOM defconfigs
* tag 'qcom-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in both
bcm2835_defconfig and multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----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=dVMC
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.4/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates for
5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in both
bcm2835_defconfig and multi_v7_defconfig
* tag 'arm-soc/for-5.4/defconfig' of https://github.com/Broadcom/stblinux:
ARM: defconfig: enable cpufreq driver for RPi
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYqWeAAoJEFBXWFqHsHzO8h8H+wTFJx+q4CF7Z8l+3OCR5rNQ
RSC3gaiYLhQUCEx+HVnvzDvhovdJNyoHiT6qdYqHIO5BYMmacsuWYwuZveaSePCl
WYZ0XkIuvMDZu4KFkl3ufEZx73u/7hbY1s4PevWm7KDeHY28XyWfflX0aW2yM/2Q
1Q/bNjMnsFGJPItBModiwS9lNjxMl7K9XBU47m0K/sJV4LFxbl+2OmfmaQYn4Ook
PAa4XbRH3d/Ff+jXrbwSy+AZZfpsiwDPV6cEwaAOTGr0O6+jKGRzqyAYNTANwjfU
ihUhy/XBjX2GRmGVxqTthDgktoSfX9eVQFU4WfDiHjRYO3y6vpBccC1ixpawUEM=
=iYpD
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.4:
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
arm64: defconfig: Build imx8 ddr pmu as module
arm64: defconfig: Select CONFIG_CLK_IMX8MN by default
arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable the new AST2600 in multi_v7 and the aspeed_g5 configs.
- Regenerate defconfigs to drop old options
- Clean up network options
-----BEGIN PGP SIGNATURE-----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=XO1W
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED defconfig updates for 5.4
- Enable the new AST2600 in multi_v7 and the aspeed_g5 configs.
- Regenerate defconfigs to drop old options
- Clean up network options
* tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: aspeed_g5: Enable AST2600
ARM: configs: multi_v7: Add ASPEED G6
ARM: configs: aspeed: Refresh defconfigs
ARM: configs: aspeed: Enable commonly used network functionality
Link: https://lore.kernel.org/r/CACPK8XdyWzghA0QPDzA_MK5FYwhT5afqDJHNdhc8mfD2uk8MfQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Maxim 77802 PMIC is a main PMIC for the following Exynos5 based boards:
Odroid XU, Chromebook Pit and Chromebook Pi. Driver for its voltage
regulator is needed very early during boot to properly instantiate SD/MMC
devices and mount rootfs, so change that driver to be compiled-in.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to make this change unique to
the multi_v7_defconfig
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7.
Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without
hihgmem.
The SoC contains Cortex A7 supporting VFP and has two CPUs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This adds the ASPEED AST2600 system and associated ASPEED devices so we
get build coverage.
The changes to the UART configuration to ensure the default console
(UART5) works.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
I revisited some older patches here, getting two of the remaining
ARM platforms to build with ARCH_MULTIPLATFORM like most others do.
In case of lpc32xx, I created a new set of patches, which seemed
easier than digging out what I did for an older release many
years ago.
* lpc32xx/multiplatform:
ARM: lpc32xx: allow multiplatform build
ARM: lpc32xx: clean up header files
serial: lpc32xx: allow compile testing
net: lpc-enet: allow compile testing
net: lpc-enet: fix printk format strings
net: lpc-enet: fix badzero.cocci warnings
net: lpc-enet: move phy setup into platform code
net: lpc-enet: factor out iram access
gpio: lpc32xx: allow building on non-lpc32xx targets
serial: lpc32xx_hs: allow compile-testing
watchdog: pnx4008_wdt: allow compile-testing
usb: udc: lpc32xx: allow compile-testing
usb: ohci-nxp: enable compile-testing
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All preparation work is done, so the platform can finally
be moved into ARCH_MULTIPLATFORM. This requires a small
change to the defconfig file to enable the platform.
Link: https://lore.kernel.org/r/20190809144043.476786-14-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver uses hardwire MMIO addresses instead of the data
that is passed in device tree. Change it over to only
hardcode the register offset values and allow compile-testing.
Link: https://lore.kernel.org/r/20190809144043.476786-6-arnd@arndb.de
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three families of IOP machines we support in Linux: iop32x
(which includes EP80219), iop33x and iop13xx (aka IOP34x aka WP8134x).
All products we support in the kernel are based on the first of these,
iop32x, the other families only ever supported the Intel reference
boards but no actual machine anyone could ever buy.
While one could clearly make them all three work in a single kernel
with some work, this takes the easy way out, removing the later two
platforms entirely, under the assumption that there are no remaining
users.
Earlier versions of OpenWRT and Debian both had support for iop32x
but not the others, and they both dropped iop32x as well in their 2015
releases.
Link: https://lore.kernel.org/r/20190809163334.489360-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C parts
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This removes the old Winbond w90x900 platform, also known
as Nuvoton NUC900. Wan Zongshun originally contributed
the port and maintained it since then.
From all I can tell, this platform is no longer being used
with modern kernels, based on various indications:
- The supported chips (nuc910/950/960) are no longer marketed
by the manufacturer
- Newer chips from the same family (nuc97x, nuc980, n329x)
that are still marketed have Linux BSPs but those were never
submitted for upstream inclusion.
- The last patch from the platform maintainer was in 2011.
- All patches to w90x900 platform specific files afterwards
are cleanups that were apparently done without access to
test hardware.
- Both the website and the email address listed in the
MAINTAINERS have become unreachable.
Link: https://lore.kernel.org/r/20190809202749.742267-17-arnd@arndb.de
Cc: "Wanzongshun (Vincent)" <wanzongshun@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ks8695 is an older SoC originally made by Kendin, which was later acquired
by Micrel, and subsequently by Microchip.
The platform port was originally contributed by Andrew Victor and Ben
Dooks, and later maintained by Greg Ungerer.
When I recently submitted cleanups, but Greg noted that the platform no
longer boots and nobody is using it any more, we decided to remove it.
Link: https://lore.kernel.org/r/20190809202749.742267-2-arnd@arndb.de
Cc: Andrew Victor <linux@maxim.org.za>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Link: https://wikidevi.com/wiki/Micrel
Link: https://lore.kernel.org/linux-arm-kernel/2bc41895-d4f9-896c-0726-0b2862fcbf25@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the PSCI CPUidle driver to replace the functionality
previously provided by the generic ARM CPUidle driver.
Link: https://lore.kernel.org/r/20190814125239.6270-3-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Exynos5250-based Arndale board has one eSATA port, so enable AHCI-platform
driver, which handles it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
OV5645 camera sensor can be used on several i.MX boards, such as
imx6qdl-wandboard, imx7d-pico, imx6ul-pico, etc.
Select the OV5645 driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the driver for STM32 booster regulator found on stm32mp1.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds FMC2 NAND controller support used by STM32MP SOCs.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.
In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:
- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
enabled by default bringing up the new graphics support.
Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
in the system.
- Set MUSB to PIO mode as this is the one working most stable
for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
driver to compile and link properly.
Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This refreshes the outdated U8500 defconfig: some options
moved around, PS/2 mouse is no longer default on, crypto
options moved around etc.
Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This addresses some assumptions made by systemd about having multiple
routing table support in the kernel. systemd-networkd will try and
provision mutliple routing tables + policies and will silently break
neighbor advertisement responses due to policy configurations on a
single table.
It also adds support for SLAAC based router settings and faster
duplicate address detection.
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=Ysfd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: configs: multi_v5: Remove duplicate ASPEED options
arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module
ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT
defconfig: arm64: enable i.MX8 SCU octop driver
arm64: defconfig: Add i.MX SCU SoC info driver
arm64: defconfig: Enable CONFIG_QORIQ_THERMAL
ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR
arm64: defconfig: ARM_IMX_CPUFREQ_DT=m
ARM: imx_v6_v7_defconfig: Add TPM PWM support by default
ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver
ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS
arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m
ARM: multi_v7_defconfig: enable STMFX pinctrl support
arm64 defconfig: enable LVM support
ARM: configs: multi_v5: Add more ASPEED devices
arm64: defconfig: Add Tegra194 PCIe driver
ARM: configs: aspeed: Add new drivers
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
arm64 defconfig: enable Mellanox cards
...
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus Walleij--
the SoC doesn't have active maintainers with hardware, and in
discussions with the vendor the agreement was that it's OK to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support.
-----BEGIN PGP SIGNATURE-----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=FX6e
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
- Add a "cut here" to make it clearer where oops dumps should be cut
from - we already have a marker for the end of the dumps.
- Add logging severity to show_pte()
- Drop unnecessary common-page-size linker flag
- Errata workarounds for Cortex A12 857271, Cortex A17 857272 and
Cortex A7 814220.
- Remove some unused variables that had started to provoke a compiler
warning.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ru/4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- Add a "cut here" to make it clearer where oops dumps should be cut
from - we already have a marker for the end of the dumps.
- Add logging severity to show_pte()
- Drop unnecessary common-page-size linker flag
- Errata workarounds for Cortex A12 857271, Cortex A17 857272 and
Cortex A7 814220.
- Remove some unused variables that had started to provoke a compiler
warning.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8863/1: stm32: select ARM errata 814220
ARM: 8862/1: errata: 814220-B-Cache maintenance by set/way operations can execute out of order
ARM: 8865/1: mm: remove unused variables
ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores
ARM: 8861/1: errata: Workaround errata A12 857271 / A17 857272
ARM: 8860/1: VDSO: Drop implicit common-page-size linker flag
ARM: arrange show_pte() to issue severity-based messages
ARM: add "8<--- cut here ---" to kernel dumps
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
-----BEGIN PGP SIGNATURE-----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=WRDT
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.3
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
* tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
ARM: defconfig: samsung: Cleanup with savedefconfig
ARM: exynos_defconfig: Trim and reorganize with savedefconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
A recent change mistakenly added a second copy of these two options,
which kbuild warns about:
arch/arm/configs/multi_v5_defconfig:257:warning: override: reassigning
to symbol ASPEED_LPC_CTRL
arch/arm/configs/multi_v5_defconfig:258:warning: override: reassigning
to symbol ASPEED_LPC_SNOOP
Fixes: 2d8bf3404b ("ARM: configs: multi_v5: Add more ASPEED devices")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
The SNVS LPGPR hardware is present on several i.MX SoCs.
Select its driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the OV2680 camera driver as it is used on the imx7s-warp board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
