Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Add the syscon LEDs as used on the board for heartbeat
and MMC traffic indication.
- Add fixed voltage regulator support, this is used by the
MMC controller for card voltage.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901082558.80388-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901073930.31548-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 61a47c1ad3 ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=SYqr
-----END PGP SIGNATURE-----
Merge tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Legacy soc_camera driver was removed from staging
- New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20
- TI vpe driver code was re-organized and had new features added
- Added Xilinx MIPI CSI-2 Rx Subsystem driver
- Added support for Infrared Toy and IR Droid devices
- Lots of random driver fixes, new features and cleanups
* tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits)
media: camss: fix memory leaks on error handling paths in probe
media: davinci: vpif_capture: fix potential double free
media: radio: remove redundant assignment to variable retval
media: allegro: fix potential null dereference on header
media: mtk-mdp: Fix a refcounting bug on error in init
media: allegro: fix an error pointer vs NULL check
media: meye: fix missing pm_mchip_mode field
media: cafe-driver: use generic power management
media: saa7164: use generic power management
media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP
media: v4l2: Correct kernel-doc inconsistency
media: v4l2: Correct kernel-doc inconsistency
media: dvbdev.h: keep * together with the type
media: v4l2-subdev.h: keep * together with the type
media: videobuf2: Print videobuf2 buffer state by name
media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description
media: tw68: use generic power management
media: meye: use generic power management
media: cx88: use generic power management
media: cx25821: use generic power management
...
CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms
after the driver was split into multiple files.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
These modules are needed to configure bridges in Linux, to take full
advantage of the KSZ switch capabilities.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
Enable DSA and KSZ9477 support as modules. Ethernet switches are used by
the SAMA5D2-ICP board.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VWPcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM77HQgAshj+pVP6bsje1ToHm1qdeYTiNYEw
rvmEZ+5+S6Qmj8wj7z0pSwAGsUe7ZqkfcOJqRUBOHQHxNKSpTvccg75QX3SQBFPE
1vojpN+XP2cDRyWFe4cbNjoAJV9hudix+AZAJNbhth92Z7YEz/KHu2oIuni6Xqqn
V+qFqqsuTCRUp+4C1rJphGaCnS5ux4E1gDz3Ae1e6LKprk4sPtpo4ViuNLRZDigK
O1RSiQJYcNTWEKdmrKQiMLPcO4elHnsf+kvi5hHXRc3a5h44yQ3qdMmysw/X6n/9
ElbmI9PCeKOaLqmkzsQYBl2M6v24KXjijmjQgA+tf2kZJB+zlSR8RwkqeQ==
=J5lQ
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.9:
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
* tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Support i.MX8MM
arm64: defconfig: enable RTC and audio support on Kontron sl28 boards
arm64: defconfig: add pca9450 pmic driver
Link: https://lore.kernel.org/r/20200720085536.24138-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
add all the new drivers merged recently.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlogAKCRDj7w1vZxhR
xZRpAP9zz41nKML2Dtb08tYExiCpYTPpKxZLditIVb++2m+MmAEAzC4DAKZ+8TeR
q64W64aLxbulbLsWw24pPRyMUKPZswM=
=JhPS
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
A bunch of patches to generally make sunxi_defconfig more helpful and
add all the new drivers merged recently.
* tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable crypto related options
ARM: sunxi: configs: Enable the Mailbox driver
ARM: configs: sunxi: Enable the PS/2 controller
ARM: configs: sunxi: Enable Lima
ARM: configs: sunxi: Add DRM output-related options
ARM: configs: sunxi: Enable ASoC options
ARM: configs: sunxi: Enable Cedrus
ARM: configs: sunxi: Enable the deinterlace and rotation engines
ARM: configs: sunxi: Enable the CSI drivers
ARM: configs: sunxi: Run savedefconfig
Link: https://lore.kernel.org/r/c74e64c9-f1f2-40ee-b4cd-c1430d32cf8d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
-----BEGIN PGP SIGNATURE-----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=x+zU
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.9-rc1
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
* tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500
ARM: tegra: Enable CPUFREQ userspace governor
Link: https://lore.kernel.org/r/20200717161300.1661002-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We refactored the CrOS EC drivers moving part of the code from the MFD
subsystem to the platform chrome subsystem. During this change we needed
to rename some config options, so, update the defconfigs accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable several very useful options and drivers for hardware that is found
on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may
require firmware files extracted from original Android image.
Link: https://github.com/grate-driver/linux-firmware
Link: https://github.com/grate-driver/alsa-ucm-conf
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CPUFREQ userspace governor in the tegra_defconfig so that
we can test CPUFREQ with the userspace governor with this configuration
on 32-bit Tegra devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
i.MX8MM is built with AArch64 hardware, this is to support
it could run in Aarch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mailbox found on the A31 and later SoCs have recently gained some
support in Linux. Since it's going to be useful for crust, let's enable it
in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200706132323.147562-2-maxime@cerno.tech
We're missing a bunch of options related to the DRM driver options (panels,
HDMI, CEC) that seems useful. Let's add them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-5-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We've had drivers for the deinterlace and rotation engines for a while now,
let's enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-3-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We've had CSI drivers for the older and newer SoCs for a while now, let's
enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-2-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We haven't run savedefconfig for a while and some options have moved
around. In order to ease the patch application / conflict resolution, let's
run it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200705091904.42795-1-maxime@cerno.tech
Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards,
- Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards,
- Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach
audiocamera shield expansion board,
- Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the
Koelsch and Lager boards,
- Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1
boards.
All of the above are modular (CEC support is an optional feature of the
modular ADV7604 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
Refresh the defconfig for Renesas ARM boards:
- Drop CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 (no longer
needed since commit 39c3e30456 ("ARM: 8984/1: Kconfig: set
default ZBOOT_ROM_TEXT/BSS value to 0x0")),
- Move CONFIG_MEDIA_SUBDRV_AUTOSELECT (moved in commit
1b80d36aeb ("media: Kconfig: move the position of sub-driver
autoselection")),
- Drop CONFIG_MEDIA_CONTROLLER=y and CONFIG_VIDEO_V4L2_SUBDEV_API=y
(auto-enabled since commit 32a363d0b0 ("media: Kconfig files:
use select for V4L2 subdevs and MC")),
- Enable CONFIG_MEDIA_PLATFORM_SUPPORT (needed since commit
06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200624131931.3686-2-geert+renesas@glider.be
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7Ij6IUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5peQf+N9PmhSdT/xgWUsudpYBTFGxZ7CP2
mkt86Qxdw5MboaR0Z+L1fsNRYglWU14Hn9GTvPmcoN7VTx6nDJnC55F5xWmP7r1C
ZgI9hH1jZG/jEWJAJmp0sZIBuaZJegUmbD1Pk3dOIMwv/9hEGtj2nI05QuUaTKof
qa8KxSwvYZSd8SKZHDoEl/E6yZZjNIlfMsv6BKTbRfqMHrixZ1y54muNNLKuca3v
hoI4I+AYPy3XhhACjYR3mhSVUF2pCVOpUcFktKdH+ZTLXX/dShMec5vyLwws+CEi
Oldg3J98qkDMnmMXV/1RLvYI/CIR6v7GbsashfinSAeeut6uPz4kgVyhpA==
=kqAi
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.8:
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
* tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
Link: https://lore.kernel.org/r/20200523032516.11016-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As these boards have no more users nor testers, and patching them has
become a burden, be that because of the PCI part or the MTD NAND
support, let's remove them.
The cm-x300 will for now remain and represent Compulab boards at its
best in the PXA department.
Link: https://lore.kernel.org/r/20200521185140.27276-1-robert.jarzmik@free.fr
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
defconfig to enable the audio codec in sunxi_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7MmQAKCRDj7w1vZxhR
xYFJAQC7OE0ip7aQrJY24AXQgeA1abiQ1+P1oHbHW6E7qnXiGgD9Exd18pO1N1JH
URcmEMjg8plFQn9+gGcHy7VFhE5V8w8=
=ut84
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two patches to enable the new cpufreq support on the H6 for the arm64
defconfig to enable the audio codec in sunxi_defconfig.
* tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: configs: Enable sun50i cpufreq nvmem
ARM: configs: sunxi: Add sun8i analog codec
Link: https://lore.kernel.org/r/9fd4d403-f6c8-420d-8b03-62e8485a0b3d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5fqAAKCRCKwlD9ZEnx
cLL+AP4qfjbDM073NG9nuiSssmswLezSrHqssSCabZ2Gx9ubegD9ERfeW4jX+6+o
VVSMvqH2paZNiuSUs2lJI/rSjJ23KA8=
=pMSS
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8 (take two)
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
* tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: multi_v7_defconfig: Enable r8a7742 SoC
ARM: shmobile: defconfig: Enable r8a7742 SoC
Link: https://lore.kernel.org/r/20200515100547.14671-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
-----BEGIN PGP SIGNATURE-----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=aCxj
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.8
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
* tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules
ARM: exynos_defconfig: Enable serial bus and BCM HCIUART drivers
Link: https://lore.kernel.org/r/20200512122922.5700-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
-----BEGIN PGP SIGNATURE-----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=LMD6
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
* tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable fixed-regulator
Link: https://lore.kernel.org/r/20200511210522.28243-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v5.7-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXqqEUgAKCRCKwlD9ZEnx
cGICAQDav5TgQ510pgY+N73kKI5QvVn1jDdpM22pIS45V9m8KQD9EtFAilc4s1yI
kYryOSflL9tjubS+SxjwAs4fCMdPtgc=
=dHzW
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8
- Refresh shmobile_defconfig for v5.7-rc1.
* tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.7-rc1
Link: https://lore.kernel.org/r/20200430084849.1457-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
-----BEGIN PGP SIGNATURE-----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=mEUB
-----END PGP SIGNATURE-----
Merge tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/defconfig
Ux500 defconfig changes for functionality merged in the
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
* tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: defconfig: u8500: Enable new drivers for ux500
ARM: defconfig: u8500: Enable new drivers for samsung-golden
Link: https://lore.kernel.org/r/CACRpkdaxT8dc=mhAd51+KtQ0K4Uj5tttt36bYJLqP_hNfWXP8w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are new drivers for functionality of that family
(RTC and ADC), so enable them, since they are used by
various i.MX6 boards.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
My recent commit b6d49cab44 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Fixes: b6d49cab44 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
