Now that we have a new subdirectory for display code, continue by moving
modesetting core code.
display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.
v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.
The sequence of operations for keeping the context pinned until saved is:
- On context activation, we preallocate a node for each physical engine
the context may operate on. This is to avoid allocations during
unpinning, which may be from inside FS_RECLAIM context (aka the
shrinker)
- On context deactivation on retirement of the last active request (which
is before we know the context has been saved), we add the
preallocated node onto a barrier list on each engine
- On engine idling, we emit a switch to kernel context. When this
switch completes, we know that all previous contexts must have been
saved, and so on retiring this request we can finally unpin all the
contexts that were marked as deactivated prior to the switch.
We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.
v2: intel_context_active_acquire/_release
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
Matching the underlying get/put functions.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com
The functions where internally already only using the structure, so we
need to just flip the interface.
v2: rebase
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com
We already use a mutex to serialise i915_reset() and wedging, so all we
need it to link that into i915_request_wait() and we have our lock cycle
detection.
v2.5: Take error mutex for selftests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614071023.17929-3-chris@chris-wilson.co.uk
As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk
With async binding, we don't want to manage a bound/unbound list as we
may end up running before we even acquire the pages. All that is
required is keeping track of shrinkable objects, so reduce it to the
minimum list.
Fixes: 6951e5893b ("drm/i915: Move GEM object domain management from struct_mutex to local")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612105720.30310-1-chris@chris-wilson.co.uk
We cannot allow ourselves to wait on the GPU while holding any lock as we
may need to reset the GPU. While there is not an explicit lock between
the two operations, lockdep cannot detect the dependency. So let's tell
lockdep about the wait/reset dependency with an explicit lockmap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085246.16374-1-chris@chris-wilson.co.uk
The intent is to be able to update the mm.lists from inside an irqsoff
section (e.g. from a softirq rcu workqueue), ergo we need to make the
i915->mm.obj_lock irqsafe.
v2: can_discard_pages() ensures we are shrinkable
v3: Beware shadowing of 'flags'
Fixes: 3b4fa9640c ("drm/i915: Track the purgeable objects on a separate eviction list")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110869
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610145430.17717-1-chris@chris-wilson.co.uk
Use i915_gem_object_lock() to guard the LUT and active reference to
allow us to break free of struct_mutex for handling GEM_CLOSE.
Testcase: igt/gem_close_race
Testcase: igt/gem_exec_parallel
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606112320.9704-1-chris@chris-wilson.co.uk
Currently, we try to report to the shrinker the precise number of
objects (pages) that are available to be reaped at this moment. This
requires searching all objects with allocated pages to see if they
fulfill the search criteria, and this count is performed quite
frequently. (The shrinker tries to free ~128 pages on each invocation,
before which we count all the objects; counting takes longer than
unbinding the objects!) If we take the pragmatic view that with
sufficient desire, all objects are eventually reapable (they become
inactive, or no longer used as framebuffer etc), we can simply return
the count of pinned pages maintained during get_pages/put_pages rather
than walk the lists every time.
The downside is that we may (slightly) over-report the number of
objects/pages we could shrink and so penalize ourselves by shrinking
more than required. This is mitigated by keeping the order in which we
shrink objects such that we avoid penalizing active and frequently used
objects, and if memory is so tight that we need to free them we would
need to anyway.
v2: Only expose shrinkable objects to the shrinker; a small reduction in
not considering stolen and foreign objects.
v3: Restore the tracking from a "backup" copy from before the gem/ split
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-2-chris@chris-wilson.co.uk
Currently the purgeable objects, I915_MADV_DONTNEED, are mixed in the
normal bound/unbound lists. Every shrinker pass starts with an attempt
to purge from this set of unneeded objects, which entails us doing a
walk over both lists looking for any candidates. If there are none, and
since we are shrinking we can reasonably assume that the lists are
full!, this becomes a very slow futile walk.
If we separate out the purgeable objects into own list, this search then
becomes its own phase that is preferentially handled during shrinking.
Instead the cost becomes that we then need to filter the purgeable list
if we want to distinguish between bound and unbound objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-1-chris@chris-wilson.co.uk
In order to support driver hot unbind, some cleanup operations, now
performed on PCI driver remove, must be called later, after all device
file descriptors are closed.
Split out those operations from the tail of pci_driver.remove()
callback and put them into drm_driver.release() which is called as soon
as all references to the driver are put. As a result, those cleanups
will be now run on last drm_dev_put(), either still called from
pci_driver.remove() if all device file descriptors are already closed,
or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530133105.30467-1-janusz.krzysztofik@linux.intel.com
Use the per-object local lock to control the cache domain of the
individual GEM objects, not struct_mutex. This is a huge leap forward
for us in terms of object-level synchronisation; execbuffers are
coordinated using the ww_mutex and pread/pwrite is finally fully
serialised again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-10-chris@chris-wilson.co.uk
Out scatterlist utility routines can be pulled out of i915_gem.h for a
bit more decluttering.
v2: Push I915_GTT_PAGE_SIZE out of i915_scatterlist itself and into the
caller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-9-chris@chris-wilson.co.uk
Get the HDR dependencies originally merged via drm-misc. Sync up all
i915 changes applied via other trees. And get v5.2-rc2 as the baseline.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too
quickly. For example, igt sets the autosuspend delay to 0, and so we
immediately attempt to perform runtime suspend upon releasing the
wakeref. Unfortunately, that involves tearing down GGTT mmaps as they
require an active device.
Override the autosuspend for GGTT mmaps, by keeping the wakeref around
for 250ms after populating the PTE for a fresh mmap.
v2: Prefer refcount_t for its under/overflow error detection
v3: Flush the user runtime autosuspend prior to system system.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527115114.13448-1-chris@chris-wilson.co.uk
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
-----BEGIN PGP SIGNATURE-----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=U/nc
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgt3n45z.fsf@intel.com
Align dumb buffer stride to 4k if the fb will be big enough to
require gtt remapping.
v2: Leave the stride alone for buffers that look to be for the cursor
v3: Make it not a hack (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To overcome display engine stride limits we'll want to remap the
pages in the GTT. To that end we need a new gtt_view type which
is just like the "rotated" type except not rotated.
v2: Use intel_remapped_plane_info base type
s/unused/unused_mbz/ (Chris)
Separate BUILD_BUG_ON()s (Chris)
Use I915_GTT_PAGE_SIZE (Chris)
v3: Use i915_gem_object_get_dma_address() (Chris)
Trim the sg (Tvrtko)
v4: Actually trim this time. Limit the max length
to one row of pages to keep things simple
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=YFiQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This has two exciting community drivers for ARM Mali accelerators.
Since ARM has never been open source friendly on the GPU side of the
house, the community has had to create open source drivers for the
Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
series. Well done to all involved and hopefully this will help ARM
head in the right direction.
There is also now the ability if you don't have any of the legacy
drivers enabled (pre-KMS) to remove all the pre-KMS support code from
the core drm, this saves 10% or so in codesize on my machine.
i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
moves out of staging.
There are also some rcar-du patches which crossover with media tree
but all should be acked by Mauro.
Summary:
uapi changes:
- Colorspace connector property
- fourcc - new YUV formts
- timeline sync objects initially merged
- expose FB_DAMAGE_CLIPS to atomic userspace
new drivers:
- vboxvideo: moved out of staging
- aspeed: ASPEED SoC BMC chip display support
- lima: ARM Mali4xx GPU acceleration driver support
- panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support
core:
- component helper docs
- unplugging fixes
- devm device init
- MIPI/DSI rate control
- shmem backed gem objects
- connector, display_info, edid_quirks cleanups
- dma_buf fence chain support
- 64-bit dma-fence seqno comparison fixes
- move initial fb config code to core
- gem fence array helpers for Lima
- ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
- lease fixes
ttm:
- unified DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
panel:
- OSD070T1718-19TS panel support
- panel-tpo-td028ttec1 backlight support
- Ronbo RB070D30 MIPI/DSI
- Feiyang FY07024DI26A30-D MIPI-DSI panel
- Rocktech jh057n00900 MIPI-DSI panel
i915:
- Comet Lake (Gen9) PCI IDs
- Updated Icelake PCI IDs
- Elkhartlake (Gen11) support
- DP MST property addtions
- plane and watermark fixes
- Icelake port sync and VEBOX disable fixes
- struct_mutex usage reduction
- Icelake gamma fix
- GuC reset fixes
- make mmap more asynchronous
- sound display power well race fixes
- DDI/MIPI-DSI clocks for Icelake
- Icelake RPS frequency changing support
- Icelake workarounds
amdgpu:
- Use HMM for userptr
- vega20 experimental smu11 support
- RAS support for vega20
- BACO support for vega12 + fixes for vega20
- reworked IH interrupt handling
- amdkfd RAS support
- Freesync improvements
- initial timeline sync object support
- DC Z ordering fixes
- NV12 planes support
- colorspace properties for planes=
- eDP opts if eDP already initialized
nouveau:
- misc fixes
etnaviv:
- misc fixes
msm:
- GPU zap shader support expansion
- robustness ABI addition
exynos:
- Logging cleanups
tegra:
- Shared reset fix
- CPU cache maintenance fix
cirrus:
- driver rewritten using simple helpers
meson:
- G12A support
vmwgfx:
- Resource dirtying management improvements
- Userspace logging improvements
virtio:
- PRIME fixes
rockchip:
- rk3066 hdmi support
sun4i:
- DSI burst mode support
vc4:
- load tracker to detect underflow
v3d:
- v3d v4.2 support
malidp:
- initial Mali D71 support in komeda driver
tfp410:
- omap related improvement
omapdrm:
- drm bridge/panel support
- drop some omap specific panels
rcar-du:
- Display writeback support"
* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
drm/msm/a6xx: No zap shader is not an error
drm/cma-helper: Fix drm_gem_cma_free_object()
drm: Fix timestamp docs for variable refresh properties.
drm/komeda: Mark the local functions as static
drm/komeda: Fixed warning: Function parameter or member not described
drm/komeda: Expose bus_width to Komeda-CORE
drm/komeda: Add sysfs attribute: core_id and config_id
drm: add non-desktop quirk for Valve HMDs
drm/panfrost: Show stored feature registers
drm/panfrost: Don't scream about deferred probe
drm/panfrost: Disable PM on probe failure
drm/panfrost: Set DMA masks earlier
drm/panfrost: Add sanity checks to submit IOCTL
drm/etnaviv: initialize idle mask before querying the HW db
drm: introduce a capability flag for syncobj timeline support
drm: report consistent errors when checking syncobj capibility
drm/nouveau/nouveau: forward error generated while resuming objects tree
drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
drm/nouveau/i2c: Disable i2c bus access after ->fini()
drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
...
Make the engine responsible for cleaning itself up!
This removes the i915->gt.cleanup vfunc that has been annoying the
casual reader and myself for the last several years, and helps keep a
future patch to add more cleanup tidy.
v2: Assert that engine->destroy is set after the backend starts
allocating its own state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190501103204.18632-1-chris@chris-wilson.co.uk
We switched to a tree of per-engine HW context to accommodate the
introduction of virtual engines. However, we plan to also support
multiple instances of the same engine within the GEM context, defeating
our use of the engine as a key to looking up the HW context. Just
allocate a logical per-engine instance and always use an index into the
ctx->engines[]. Later on, this ctx->engines[] may be replaced by a user
specified map.
v2: Add for_each_gem_engine() helper to iterator within the engines lock
v3: intel_context_create_request() helper
v4: s/unsigned long/unsigned int/ 4 billion engines is quite enough.
v5: Push iterator locking to caller
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-7-chris@chris-wilson.co.uk
In the next patch, we require the engine vfuncs setup prior to
initialising the pinned kernel contexts, so split the vfunc setup from
the engine initialisation and call it earlier.
v2: s/setup_xcs/setup_common/ for intel_ring_submission_setup()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190426163336.15906-6-chris@chris-wilson.co.uk
In the current scheme, on submitting a request we take a single global
GEM wakeref, which trickles down to wake up all GT power domains. This
is undesirable as we would like to be able to localise our power
management to the available power domains and to remove the global GEM
operations from the heart of the driver. (The intent there is to push
global GEM decisions to the boundary as used by the GEM user interface.)
Now during request construction, each request is responsible via its
logical context to acquire a wakeref on each power domain it intends to
utilize. Currently, each request takes a wakeref on the engine(s) and
the engines themselves take a chipset wakeref. This gives us a
transition on each engine which we can extend if we want to insert more
powermangement control (such as soft rc6). The global GEM operations
that currently require a struct_mutex are reduced to listening to pm
events from the chipset GT wakeref. As we reduce the struct_mutex
requirement, these listeners should evaporate.
Perhaps the biggest immediate change is that this removes the
struct_mutex requirement around GT power management, allowing us greater
flexibility in request construction. Another important knock-on effect,
is that by tracking engine usage, we can insert a switch back to the
kernel context on that engine immediately, avoiding any extra delay or
inserting global synchronisation barriers. This makes tracking when an
engine and its associated contexts are idle much easier -- important for
when we forgo our assumed execution ordering and need idle barriers to
unpin used contexts. In the process, it means we remove a large chunk of
code whose only purpose was to switch back to the kernel context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424200717.1686-5-chris@chris-wilson.co.uk
Start partitioning off the code that talks to the hardware (GT) from the
uapi layers and move the device facing code under gt/
One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to
subdivide that header and body further (and split out the submission
code from the ringbuffer and logical context handling). This patch aims
to be simple motion so git can fixup inflight patches with little mess.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk
When we are called to relieve mempressue via the shrinker, the only way
we can make progress is either by discarding unwanted pages (those
objects that userspace has marked MADV_DONTNEED) or by reclaiming the
dirty objects via swap. As we know that is the only way to make further
progress, we can initiate the writeback as we invalidate the objects.
This means the objects we put onto the inactive anon lru list are
already marked for reclaim+writeback and so will trigger a wait upon the
writeback inside direct reclaim, greatly improving the success rate of
direct reclaim on i915 objects.
The corollary is that we may start a slow swap on opportunistic
mempressure from the likes of the compaction + migration kthreads. This
is limited by those threads only being allowed to shrink idle pages, but
also that if we reactivate the page before it is swapped out by gpu
activity, we only page the cost of repinning the page. The cost is most
felt when an object is reused after mempressure, which hopefully
excludes the latency sensitive tasks (as we are just extending the
impact of swap thrashing to them).
Apparently this is not the first time we've had this idea. Back in
commit 5537252b6b ("drm/i915: Invalidate our pages under memory
pressure") we wanted to start writeback but settled on invalidate after
Hugh Dickins warned us about a possibility of a deadlock within shmemfs
if we started writeback from shrink_slab. Looking at the callchain,
using writeback from i915_gem_shrink should be equivalent to the pageout
also employed by shrink_slab, i.e. it should not be any riskier afaict.
v2: Leave mmapings intact. At this point, the only mmapings of our
objects will be via CPU mmaps on the shmemfs filp, which are
out-of-scope for our LRU tracking. Instead leave those pages to the
inactive anon LRU page list for aging and pageout as normal.
v3: Be selective on which paths trigger writeback, in particular
excluding paths shrinking just to reclaim vm space (e.g. mmap, vmap
reapers) and avoid starting writeback on the entire process space from
within the pm freezer.
References: https://bugs.freedesktop.org/show_bug.cgi?id=108686
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190420115539.29081-1-chris@chris-wilson.co.uk
Read the engine workarounds back using the GPU after loading the initial
context state to verify that we are setting them correctly, and bail if
it fails.
v2: Break out the verification into its own loop
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417075657.19456-3-chris@chris-wilson.co.uk
On resume, we know that the only pinned contexts in danger of seeing
corruption are the kernel context, and so we do not need to walk the
list of all GEM contexts as we tracked them on each engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410190120.830-1-chris@chris-wilson.co.uk
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: gen6_rps_reset_ei() is in i915_irq.c not intel_pm.c.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/adc6463b95eef3440fba9826793f7d1c5f3b0b4a.1554461791.git.jani.nikula@intel.com
Mixing u8 and -1u together leads to zero-extended integer expansion, and
comparing 0x000000ff against 0xffffffff, causing us to report a mixed
uabi-class request as not busy.
The input flag is a u8, and we want to generate a u32 uABI response,
mark our functions so.
Fixes: c8b502422b ("drm/i915: Remove last traces of exec-id (GEM_BUSY)")
Testcase: igt/gem_exec_balance/busy
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404101914.7231-1-chris@chris-wilson.co.uk
If the user passes in a pointer to a GGTT mmaping of the same buffer
being written to, we can hit a deadlock in acquiring the shmemfs page
(once as the write destination and then as the read source).
[<0>] io_schedule+0xd/0x30
[<0>] __lock_page+0x105/0x1b0
[<0>] find_lock_entry+0x55/0x90
[<0>] shmem_getpage_gfp+0xbb/0x800
[<0>] shmem_read_mapping_page_gfp+0x2d/0x50
[<0>] shmem_get_pages+0x158/0x5d0 [i915]
[<0>] ____i915_gem_object_get_pages+0x17/0x90 [i915]
[<0>] __i915_gem_object_get_pages+0x57/0x70 [i915]
[<0>] i915_gem_fault+0x1b4/0x5c0 [i915]
[<0>] __do_fault+0x2d/0x80
[<0>] __handle_mm_fault+0xad4/0xfb0
[<0>] handle_mm_fault+0xe6/0x1f0
[<0>] __do_page_fault+0x18f/0x3f0
[<0>] page_fault+0x1b/0x20
[<0>] copy_user_enhanced_fast_string+0x7/0x10
[<0>] _copy_from_user+0x37/0x60
[<0>] shmem_pwrite+0xf0/0x160 [i915]
[<0>] i915_gem_pwrite_ioctl+0x14e/0x520 [i915]
[<0>] drm_ioctl_kernel+0x81/0xd0
[<0>] drm_ioctl+0x1a7/0x310
[<0>] do_vfs_ioctl+0x88/0x5d0
[<0>] ksys_ioctl+0x35/0x70
[<0>] __x64_sys_ioctl+0x11/0x20
[<0>] do_syscall_64+0x39/0xe0
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
We can reduce (but not eliminate!) the chance of this happening by
faulting the user_data before we take the page lock in
pagecache_write_begin(). One way to eliminate the potential recursion
here is by disabling pagefaults for the copy, and handling the fallback
to use an alternative method -- so convert to use kmap_atomic (which
should disable preemption and pagefaulting for the copy) and report
ENODEV instead of EFAULT so that our caller tries again with a different
copy mechanism -- we already check that the page should have been
faultable so a false negative should be rare.
Testcase: igt/gem_pwrite/self
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401133909.31203-1-chris@chris-wilson.co.uk
When we return pages to the system, we release control over them and
should defensively return them to the CPU write domain so that we catch
any external writes on reacquiring them (e.g. to transparently
swapout/swapin). While we did this defensive clflushing for ordinary
shmem pages, it was forgotten for userptr. Fortunately, userptr objects
are normally cache coherent and so oblivious to the forgotten domain
tracking.
References: a679f58d05 ("drm/i915: Flush pages on acquisition")
References: 754a254427 ("drm/i915: Skip object locking around a no-op set-domain ioctl")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190331094620.15185-1-chris@chris-wilson.co.uk
Since GEM_CREATE is trying to outsmart the user by rounding up unaligned
objects, we used to update the size returned to userspace.
This update seems to have been lost throughout the history.
v2: Use round_up(), reorder locals (Chris)
References: ff72145bad ("drm: dumb scanout create/mmap for intel/radeon (v3)")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Janusz Krzysztofik <janusz.krzysztofik@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326170218.13255-1-michal.winiarski@intel.com
Since commit b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we
submit the first batch/context"), intel_suspend_gt_powersave() has been
a no-op. As we still do not need to do anything explicitly on suspend
(we do everything required on idling), remove the defunct function.
References: b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we submit the first batch/context")
Suggested-by: "Hiatt, Don" <don.hiatt@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190323214009.23294-1-chris@chris-wilson.co.uk
Adding a call to intel_uc_suspend in i915_gem_suspend, which
is a common point for the suspend/resume and hibernate paths.
This fixes an unbalanced call that causes issues with the CTB
register/deregister.
v2: Making the call unconditional (Daniele)
Moving the call to after the GEM_BUG_ON (Chris)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321203804.6845-1-sujaritha.sundaresan@intel.com
