Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c: In function dpu_encoder_phys_vid_disable:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:566:26: warning: variable priv set but not used [-Wunused-but-set-variable]
It is not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_danger_signal_status:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:80:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_prepare_commit:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:271:26: warning: variable priv set but not used [-Wunused-but-set-variable]
It is not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Without this header file, compile-testing may run into a missing
declaration:
drivers/gpu/drm/msm/msm_gpu.c:444:4: error: implicit declaration of function 'put_task_struct' [-Werror,-Wimplicit-function-declaration]
Fixes: 482f96324a ("drm/msm: Fix task dump in gpu recovery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move the static keyword to the front of declarations
of msm_dsi_v2_host_ops, msm_dsi_6g_host_ops and
msm_dsi_6g_v2_host_ops, and resolve the following
compiler warnings that can be seen when building
with warnings enabled (W=1):
drivers/gpu/drm/msm/dsi/dsi_cfg.c:150:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
drivers/gpu/drm/msm/dsi/dsi_cfg.c:161:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
drivers/gpu/drm/msm/dsi/dsi_cfg.c:172:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The arguments related to IOMMU port name have been unused since
commit 944fc36c31 ("drm/msm: use upstream iommu") and can be removed.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
dpu_kms.dev will never be NULL, so don't bother checking.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_drm_private.kms will only be NULL in the dummy headless case, so
there is no need to check it in the dpu display driver.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm_crtc.dev will never be NULL, so no need to check it.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm_device.dev_private is set to a non-NULL msm_drm_private
struct in msm_drm_init. Successful initialization of msm means
that dev_private is non-NULL so there is no need to check it
everywhere.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The files a3xx_gpu.c and a4xx_gpu.c have ifdefs for the OCMEM support
that was missing upstream. Add two new functions (adreno_gpu_ocmem_init
and adreno_gpu_ocmem_cleanup) that removes some duplicated code.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Gabriel Francisco <frc.gabrielgmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.
Signed-off-by: Denis Efremov <efremov@linux.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
clk_get_parent returns an error pointer upon failure, not NULL. So the
checks as they exist won't catch a failure. This patch changes the
checks and the return values to properly handle an error pointer.
Fixes: c4d8cfe516 ("drm/msm/dsi: add implementation for helper functions")
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This was useful for debugging fps drops. I suspect it will be useful
again.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
In addition, moving to kms->flush_commit() lets us drop the only user
of kms->commit().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Now that flush/wait/complete is decoupled from the "synchronous" part of
atomic commit_tail(), add support to defer flush to a timer that expires
shortly before vblank for async commits. In this way, multiple atomic
commits (for example, cursor updates) can be coalesced into a single
flush at the end of the frame.
v2: don't hold lock over ->wait_flush(), to avoid locking interaction
that was causing fps drop when combining page flips or non-async
atomic commits and lots of legacy cursor updates
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
With atomic commit, ->prepare_commit() and ->complete_commit() may not
be evenly balanced (although ->complete_commit() will complete each
crtc that had been previously prepared). So these will no longer be
a good place to enable/disable clocks needed for hw access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends
should migrate writing flush registers to this hook, so we can decouple
pushing updates to hardware, and flushing the updates.
Once we add async commit support, the hw updates will be pushed down to
the hw synchronously, but flushing the updates will be deferred until as
close to vblank as possible, so that multiple updates can be combined in
a single frame.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Prep work for async commits, in which case this will be called after we
no longer have the atomic state object.
This drops some wait_for_vblanks(), but those should be unnecessary, as
we call this after waiting for flush to complete.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
First step in re-working the atomic related internal API to prepare for
async updates pending.. ->wait_flush() is intended to block until there
is no in-progress flush.
A crtc_mask is used, rather than an atomic state object, as this will
later be used for async flush after the atomic state is destroyed.
This replaces ->wait_for_crtc_commit_done()
v2: update for review comments
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the callback was called from whoever called wait_for_vblank(),
but that isn't a great plan when wait_for_vblank() stops getting called,
and results in frame_done_timer expiring.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Just waiting for next vblank isn't ideal.. we should really be looking
at the hw FLUSH register value to know if there is still an in-progress
flush without stalling unnecessarily when there is no pending flush.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
It attempted to avoid fps drops in the presence of cursor updates. But
it is racing, and can result in hw updates after flush before vblank,
which leads to underruns.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove the default for CONFIG_DRM_MSM and let the user select the driver
manually as one does.
Additionally select QCOM_COMMAND_DB for ARCH_QCOM targets to make sure
it doesn't get missed when we need it for a6xx targets.
v2: Move from default 'm' to no default
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The extra line-break in traces was annoying me.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously, dpu_crtc_frame_event_work() would try to aquire all the
modeset locks in order to check whether it can release bandwidth. (If
we only have cmd-mode display, bandwidth can be released at frame-done
time.)
The problem with this is that it is also responsible for signalling
frame_done_comp, which dpu_crtc_commit_kickoff() waits on if there is
already a frame pending. This is called in the msm_atomic_commit_tail()
path.. which means that for non-nonblock commits, at least some of the
modeset locks are already held.
Re-work this scheme to use a reference count to track our need to have
clocks enabled. It is incremented for each atomic commit, and
decremented in the corresponding frame-done. Additionally, any crtc
used in video mode hold an extra reference while they are enabled. The
net effect is that we can determine in frame-done whether it is safe to
drop bandwidth without needing to aquire any modeset locks.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct msm_gem_submit {
...
struct {
...
} bos[0];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(*submit) + ((u64)nr_bos * sizeof(submit->bos[0]))
with:
struct_size(submit, bos, nr_bos)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove the homebrewed bulk clock get function and replace it with
devm_clk_bulk_get_all().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Creating the msm gem address space requires a reference to the dev where
the iommu is located. The driver currently assumes this is the same as
the platform device, which breaks when the iommu is outside of the
platform device (ie in the parent). Default to using the platform device,
but check to see if that has an iommu reference, and if not, use the parent
device instead. This should handle all the various iommu designs for
mdp5 supported systems.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The following errors show up when booting the Nexus 5:
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_regulator_init: failed to init regulator, ret=-517
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_driver_probe: failed to init regulator
dsi_phy_regulator_init() already logs the error, so no need to log
the same error a second time in dsi_phy_driver_probe(). This patch
also changes dsi_phy_regulator_init() to not log the error if the
error code is -EPROBE_DEFER to reduce noise in dmesg.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[add some {}'s]
Signed-off-by: Rob Clark <robdclark@chromium.org>
For platforms that require the "zap shader" to take the GPU out of
secure mode at boot, we also need the zap fw to end up in the initrd.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for MDP5 version v3.0 found on msm8998.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
[silence unitialized variable warnings]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unused and the extra rpm get/put interferes with handover from
bootloader (ie. happens before we have a chance to check if
things are already enabled).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If booting a device using EFI, efifb will likely come up and claim the
console. When the msm display stack finally comes up, we want the
console to move over to the msm fb, so add support to kick out any
firmware based framebuffers to accomplish the console transition.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This switches the MSM HDMI code to use GPIO descriptors.
Normally we would fetch the GPIOs from the device with the
flags GPIOD_IN or GPIOD_OUT_[LOW|HIGH] to set up the lines
immediately, but since the code seems eager to actively
drive the lines high/low when turning HDMI on and off, we
just fetch the GPIOs as-is and keep the code explicitly
driving them.
The old code would try legacy bindings (GPIOs without any
"-gpios" suffix) but this has been moved to the gpiolib
as a quirk by the previous patch.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DPU has some kind of idea that it wants to be able to
bring up power using GPIO lines. The struct dss_gpio is however
completely unused and should this be done, it should be done
using the GPIO descriptor framework rather than this API
which relies on the global GPIO numberspace. Delete this
code before anyone hurt themselves.
The inclusion of <linux/gpio.h> was abused to get some OF
and IRQ headers implicitly included into the DPU utilities,
make these includes explicit and push them down into the actual
implementation.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This DSI driver uses the new descriptor API so these old
GPIO API includes are surplus.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This file is not using any symbols from <linux/gpio.h> so just
drop this include.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drop the deprecated drmP.h header file, and trim msm_drv.h
to the relevant include files.
This resulted in a suprisingly many edits as many files relied
on headers included via msm_drv.h.
But msm_drv.h is not supposed to carry include files it do not need, so
the individual files have to include what extra they needs.
v2:
- Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Carsten Behling <carsten.behling@googlemail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Todor Tomov <todor.tomov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXVqvpwAKCRDj7w1vZxhR
xa3RAQDzAnt5zeesAxX4XhRJzHoCEwj2PJj9Re6xMJ9PlcfcvwD+OS+bcB6jfiXV
Ug9IBd/DqjlmD9G9MxFxfSV946rksAw=
=8uv4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixup dma_resv rename fallout]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXUwPUAAKCRDj7w1vZxhR
xQ4lAQDK2ijx29YHeZspbOwP4Nwq95DFs1uQcSm5GvbRt1JSowD9EwkLeNfkPkel
Xv1Ts/Frgq7ckH2e2zkLPyCOFCHd0wA=
=rIUl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
The authentication can be circumvented, by design, by using the render
node.
From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: freedreno@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-7-emil.l.velikov@gmail.com
add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes. This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched. This prevents display from initing if a GPU node is
defined, but it's status is disabled.
Fix this by checking the node's status before adding it to the match list.
Fixes: dc3ea265b8 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com
