- Tested on the ARM PB11MPCore
- Tested with boardfile boot
- Tested with DeviceTree boot
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tfk1
-----END PGP SIGNATURE-----
Merge tag 'realview-multiplatform-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform
Pull "Multiplatform support for the RealView" from Linus Walleij:
Here is the result of my application of the second part of Arnds
patchset, actually enabling multiplatform and getting the RealView
off the ground as a multiplatform target.
It is dependent on an outstanding patch to the irqchips tree bumping
the number of GICs to 2 for the RealView platform. I cannot say I will
be sleepless if these go in side by side: each branch will compile but
will not boot until both trees have been pulled hurting bisectability a
bit.
- Tested on the ARM PB11MPCore
- Tested with boardfile boot
- Tested with DeviceTree boot
* tag 'realview-multiplatform-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: realview: select apropriate targets
ARM: realview: clean up header files
ARM: realview: make all header files local
ARM: no longer make CPU targets visible separately
ARM: integrator: use explicit core module options
ARM: realview: enable multiplatform
Now that we have multiplatform support, let the RealView
defconfigs select all the RealView boards so we boot out of
the box like before. This updates both defconfigs.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The debug-ll infrastructure can be configured in two ways, either
by selecting a platform specific debug option, or by picking one
of the generic options (8250 or pl01x typically). For compatibility
with multiplatform kernels, we have changed a couple of platforms
to use the former method now when they used to use the latter.
Unfortunately, this broke the defconfigs because now they still
enable CONFIG_DEBUG_LL_UART_PL01X or CONFIG_DEBUG_LL_UART_8250,
and we no longer configure the correct register addresses
automatically.
Embarrassingly, this was only found in linux-next when the
defconfig builds turned up errors for multiple people, and I
had not caught those in my own tests, which were done using
the randconfig fixes patchset on top, and that has a workaround
to avoid a build error when the addresses are not configured.
The error was something like:
.config:2010:warning: symbol value '' invalid for DEBUG_UART_PHYS
.config:2011:warning: symbol value '' invalid for DEBUG_UART_VIRT
This patch avoids the problem by removing the respective
statements from the defconfig files. Any out of tree defconfig
files on the platforms I have changed will have to do the same
change or run into the build error above. Any users that have
a full .config already set the correct DEBUG_UART_PHYS/VIRT
addresses and do not need to change anything.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4db22c1 ("ARM: debug-ll: rework integrator/versatile handling")
Fixes: f06455f ("ARM: debug-ll: rework ep93xx handling")
Fixes: c047f52 ("ARM: debug-ll: reorganize mvebu debug uart config")
Fixes: 59bd4c3 ("ARM: debug-ll: rework lpc32xx handling")
Enable some ssbi drivers present on msm8660, msm8960 and apq8064
devices so that we fully exercise the devices present in the dts
files.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This enables smem, smd, rpm, regulators, pmic pinctrl and hwspinlock as
these platform features are now merged. It enables gpio-keys as this is
used by most boards and enables fhandle and cgroups, so we can boot
systemd.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- orion5x/mv78xx0 multiplatform conversion
- legacy dove PMU support conversion
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlZq1uEACgkQCwYYjhRyO9XZ8ACdHuhMhzgLQ3lR/wUj0Eaj6udh
AuMAn2JdAcBRYkI6B0PkPK5igJugASzQ
=pkme
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu into next/multiplatform
Merge "mvebu soc for 4.5 (part 1)" from Gregory CLEMENT:
- orion5x/mv78xx0 multiplatform conversion
- legacy dove PMU support conversion
* tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu:
ARM: dove: convert legacy dove to PMU support
soc: dove: add legacy support to PMU driver
ARM: orion5x: multiplatform support
ARM: orion5x: clean up mach/*.h headers
ARM: mv78xx0: multiplatform support
ARM: mv78xx0: clean up mach/*.h headers
ARM: orion: use SPARSE_IRQ everywhere
ARM: orion: always use MULTI_IRQ_HANDLER
ARM: orion: move watchdog setup to mach-orion5x
Conflicts:
arch/arm/Kconfig
arch/arm/mach-dove/include/mach/entry-macro.S
arch/arm/mach-orion5x/include/mach/entry-macro.S
Merge "ARM Versatile multi-platform support" from Rob Herring:
Arnd lit a fire under me to dust this off and get it merged. So here it
is. The main change from prior version is I merged all the code to a
single file. It's a bigger patch than I'd like, but I don't think trying
to do it in multiple steps is worth it.
This is dependent on some solution for the default platform choice on
!MMU builds (allnoconfig) as it can't be Versatile after this series.
Arnd has some ideas on how to address that.
This is tested under QEMU. Linus previously tested this on actual h/w
and had a problem with the display identification which needs
investigation or agreement to worry about it if and when someone
actually cares.
* versatile/multiplatform:
ARM: versatile: convert to multi-platform
ARM: versatile: merge mach code into a single file
ARM: versatile: switch to DT only booting and remove legacy code
ARM: versatile: add DT based PCI detection
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Now that all the prerequisites are in place, we can enable Versatile
boards for multi-platform kernels.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to meet high performance an low power requirement for Rockchip
enable the power domain support. The patch also fixes a drm/kms issue,
driver deferring untils power-domains are available)
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Enable USB OTG dual-role and some cleanup by make savedefconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWZ1WgAAoJEBmUBAuBoyj0OlwP/3EZyo1lLAU4ZMDmB9biciVR
FMUiLO2UoUIMdgz/2V/glSC92QehyYVQrOhOo3pFS3RfLdrPDhHbHvja/7yelYhi
6MzyvQAF4qlWLA8TeVKvisgE7+zjhB24uwG+CRgbdd/PM/XUqkINCo//CcrZo4ex
RL/XYKNwCqW+pQjnUVYNogWdlwoqNKdaFcVGELKnJcymN4LvkkvLs1y+swMxjou5
qGH9vlXyXvNEJvb44OsrfMZPT6X0CfN/lRrzGoIoc+0cxg4YEiLhTrHDO8Pgr/Pv
IyEoNy6jWL2+RiUg4pBXfu2aEm62tmRTyURn7xYPVzyvS+fPAHAcFiJk+jmF6IX+
2TFHjLJN5X7EaGukVaLYEGCvivlJdR2gjj8tvdtfWY45OX28SxLTxbUGfWOZBOSL
ICF2E4hD6UG1hTJ+ot9aJoVWVtLZw5bhcvtCmZM6YU5N422BKTPSACBZhVCWwsLd
pj9HsirBS5F3zu710DZQuoh35qB38XXcLWI57rvR4RD87ncDg6p6UrQDUsEAeAa7
L3HGnBp/mDJLrF1ASWDXxdcV2fykoNxdNP10r06MrcbjUY6keihEuS7ePnNunGpn
a1c4DQRnaPVmrBCwd51BNfEk2tU+M2Mo3JfINLS+iMQuCVJMs7+Jj4+VwuA4AL5f
1qwsWAuBhlNg6Yx6QEx6
=y5U2
-----END PGP SIGNATURE-----
Merge tag 'socfpga_defconfig_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig
Merge "SoCFPGA defconfig update for v4.5" from Dinh Nguyen:
-Enable USB OTG dual-role and some cleanup by make savedefconfig
* tag 'socfpga_defconfig_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm: socfpga_defconfig: enable USB dual-role and cleanup
This adds a few features that are available on some
or all of the RealView but never made it into the SMP
defconfig file:
- Full tickless idle
- High resolution timers
- Perf events and HW perf events from the PMU
- MTD AFS partition handling
- MTD ROM partition handling
- USB and ISP1760 USB driver
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a few features that are available on some
or all of the RealView but never made it into the defconfig
file:
- High-resolution timers
- Perf events and HW perf events from the PMU
- MTD AFS partition handling
- MTD ROM partition handling
- USB and ISP1760 USB driver
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the RealView SMP defconfig with the latest Kconfig
structure.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the RealView defconfig with the latest Kconfig
structure.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch enables some drivers for LS1021A, such as
GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM.
QorIQ Clock Framework and Ramdisk support is also enabled.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A bunch of patches to enable new drivers related to Allwinner SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWbrDuAAoJEBx+YmzsjxAgTdoP+QFrx/IEge9ipLDe2wQ3jbiz
4Qn2JkkbwBDALXUMAjHEKXx5xknbq38x/iUnYkZsZCw7RaijxCirvjzSW/6EozCu
aRnmNLakSNdG7H8erVhOYEDFOpaXnv+v5OJ8PI8mW7+NDBRhQ1o/GCn7C/Yb2K3K
A/1mUtbH6pT53yU2qzXj0Ez+MtRGMrWyod2gePSwR7NlNr7pVXQDPkeMA09HV37J
HkTHsa5bU59ou96MN+wZLI8eTT6L7PIU64FX89f5C4V4vLvPe4roBXmzm6Ii47up
lbJX2HJP01ruz/aJdb6rUrB7jRqpi9//E6RrkmWy8u5QX/WGJbeVY6SfFivSu/gM
5SLit995SX1SmVk7z4VVEK9gxlzklO1lyjzxa/m2t3a1lk1Cb2G9ImV8nD6vesvu
wUDCLc4cfdAc+HK9DnGsQEp2T4Q+UltsXYstsEds0Ui3fRXWTrehkbDSPS0mg6Hu
ExJfhrVpsB4LtuwOl1DWnBEC+E+eJ0xggMFSBvfA5HJynlQx4nuRHOAuvR0ovBY9
oPd7JW8LHJnAfv1txZlUKdItZ/GCVAvfv1zUgXgoJIzaAA/5wFdJZidBGwI1yj9h
TgylqmoiIxMMue7FgtEUS/mf2zSmkNgcKevARoe7ubPwAPWYu70DOjWXDPjVsw1B
7kiPahxBKCi1Vezr+z12
=eVFZ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.5" from Maxime Ripard:
A bunch of patches to enable new drivers related to Allwinner SoCs.
* tag 'sunxi-defconfig-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Clean up sunxi_defconfig
ARM: sunxi: Really enable LRADC keys in sunxi_defconfig
ARM: sunxi: Re-enable SID driver in sunxi_defconfig
ARM: sunxi: Re-enable SID driver in multi_v7_defconfig
ARM: multi_v7_defconfig: Enable RSB and AXP20X related drivers as modules
ARM: sunxi_defconfig: Update MFD_AXP20X symbol and enable MFD_AXP20X_RSB
update of mvebu_v5 defconfig with the addition of cpuidle
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlZlsxEACgkQCwYYjhRyO9UumgCfR353K8WoWry2InK6VnZvD9hG
tuEAnjYYkYYGvdt4/hl/ASSXTOqfM9R4
=2Sxs
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.5-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "mvebu defconfig for 4.5 (part 1)" from Gregory CLEMENT:
update of mvebu_v5 defconfig with the addition of cpuidle
* tag 'mvebu-defconfig-4.5-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: add Kirkwood cpuidle to defconfig
ARM: mvebu: update v5 defconfig
Enable AT91SAM9X and SAMA5D4 watchdog drivers.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Enable NVMEM driver for NXP LPC18xx EEPROM, which can be found in
NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Enable all missing support, extracted from the various Renesas ARM DTSes
using linux-config-from-dt.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas R-Car (Gen1) USB PHY driver (which is being removed) does
not support DT, and is thus useless in a generic ARM multi-platform
kernel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Remove now unnecessary header
* Introduce ARCH_RENESAS
* Remove unmaintened URL from MAINTAINERS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qeBx
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Merge "Renesas ARM Based SoC Cleanup for v4.5" from Simon Horman:
* Remove now unnecessary header
* Introduce ARCH_RENESAS
* Remove unmaintened URL from MAINTAINERS
* tag 'renesas-cleanup-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove legacy mach/irqs.h
ARM: shmobile: Introduce ARCH_RENESAS
MAINTAINERS: Remove link to oss.renesas.com which is closed
Enabling the frame buffer device on armadillo800eva requires the board
staging code.
Also enable the frame buffer, so you will actually see output during
boot.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable all missing support, extracted from the various Renesas ARM DTSes
using linux-config-from-dt.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas R-Car (Gen1) USB PHY driver (which is being removed) does
not support DT, and is thus useless in a Renesas ARM multi-platform
kernel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable timestamps for kernel log output to improve debugging.
You can always use "dmesg -t" to strip the timestamps.
Don't specify CONFIG_LOG_BUF_SHIFT=16 while we're at it. There's a
reason the default in Kconfig is higher ;-)
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable this config in the defconfig so that we can delete the
selection logic surrounding it that exists in mach-qcom/Kconfig.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Now that Orion5x is part of the multiarch kernel, add it to
mvebu_v5_defconfig.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
DSA now depends on switchdev. Enable it, and re-enable DSA and its
drivers, which were removed when mvebu_v5_defconfig was regenerated.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Now that Orion5x is part of the v5 multiarch kernel enable it in the
multi_v5_defconfig.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
DSA now depends on switchdev. Enable it, and re-enable DSA and its
drivers, which were removed when multi_v5_defconfig was regenerated.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Dues the Kconfig changes, multi_v5_defconfig needs regenerating.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The orion5x platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The mv78xx0 platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Honami device does not boot due to the lack of pinctrl support
compiled in with the multi_v7_defconfig. This patch correct this and
enables coincell, sdhci, smsm, smp2p and wcnss_ctrl as well, all found
on a variety of Qualcomm boards.
Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
This has been stable on i.MX6 for a good while now and there is no
reason to keep it disabled, as it allows to allocate non-shared
IRQs if several PCIe devices are connected to a single host.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch enables the QCOM SPMI and PMIC related drivers that are now
required to boot some supported devices.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After all preparation work is done, we can finally move the Kconfig
option for s3c64xx into ARCH_MULTIPLATFORM. This implies allowing
SAMSUNG_ATAGS for multiplatform again, but now disallowing the
ADC driver below it, as that still has dependencies on header files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set following options to a value recommended by systemd (which also
matches the multi_v7 deconfig):
1. Enable AUTOFS4_FS - for systemd.automount [0];
2. Enable BLK_DEV_BSG - SG v4 for recend udev [0][1];
3. Disable UEVENT_HELPER_PATH - legacy hook for hotplug, forked for each
uevent, slows down booting [0];
[0] http://cgit.freedesktop.org/systemd/systemd/tree/README
[1] http://patchwork.ozlabs.org/patch/47921/
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
The Kirkwood v5 platforms need their CPUIDLE driver, so put it
into the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This just regenerates the v5 mvebu defconfig with the latest
defaults so as to avoid too much fuzz when applying patches to
it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
NFS client is already enabled (NFS_FS) and by default it enables clients
for version 2 and 3. Enable explicitly the version 4 client to utilize
the newer protocol.
The NFS client is especially useful for testing kernel in automated
environments (network boot with network file system).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Select CONFIG_DRM_DW_HDMI_AHB_AUDIO so that we have HDMI audio
supported by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vf610 adc driver is present on Vybrid, MX6SX, MX6UL and MX7D.
Select it by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx_v6_v7_defconfig is not suitable for booting LS1021 as it needs
LPAE.
Remove this option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Clean up sunxi_defconfig by generating a fresh file via
make sunxi_defconfig
make savedefconfig
While this moves around a few lines and removes unnecessary symbols,
it doesn't introduce any functional changes. The resulting .config is
identical before and after this patch.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Commit be8becb81b ("ARM: sunxi_defconfig: Enable LRADC keys
(KEYBOARD_SUN4I_LRADC)") added CONFIG_KEYBOARD_SUN4I_LRADC=y to
sunxi_defconfig. However, it depends on CONFIG_KEYBOARD which is
explicitly disabled in sunxi_defconfig. Hence, the LRADC keys were
never actually enabled. Remove the line disabling CONFIG_KEYBOARD in
order to really enable KEYBOARD_SUN4I_LRADC.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Commit 3d0b16a66c ("nvmem: sunxi: Move the SID driver to the nvmem
framework") moved the the sunxi SID driver to a new framework, but left
sunxi_defconfig with the deprecated config symbol EEPROM_SUNXI_SID
instead of the new symbol NVMEM_SUNXI_SID. Hence, re-enable the driver
in sunxi_defconfig.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Commit 3d0b16a66c ("nvmem: sunxi: Move the SID driver to the nvmem
framework") moved the the sunxi SID driver to a new framework, but left
multi_v7_defconfig with the deprecated config symbol EEPROM_SUNXI_SID
instead of the new symbol NVMEM_SUNXI_SID. Hence, re-enable the driver
in multi_v7_defconfig.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
axp20x support has been split into 2 parts, I2C and RSB interface
variants.
Update the MFD_AXP20X symbol for I2C support. Also enable SUNXI_RSB
MFD_AXP20X_RSB to support RSB variants. Build these drivers as
modules.
Keep MFD_AXP20X enabled for now, to ease migration for automated
boot farms while the patches are being merged. This should be
removed in the next release.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
axp20x support has been split into 2 parts, I2C and RSB interface
variants.
Update the MFD_AXP20X symbol for I2C support, and also enable
MFD_AXP20X_RSB to support RSB variants.
Keep MFD_AXP20X enabled for now, to ease migration for automated boot
farms while the patches are being merged. This should be removed in the
next release.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Since the multi_v7_defconfig is used to build an image for different
platforms, the options should be enabled as module whenever possible.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable support for:
1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4 (Maxim
77843);
2. LED driver on Trats2 board (Maxim 77693).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Enable support for Maxim 8997 Multi Function Device present on Trats and
Origen boards by toggling on drivers: main MFD, charger, haptic motor,
regulator, LED and RTC.
This allows to test and usage of these boards with multi_v7 config.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Enable support for:
1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4
(Maxim 77843);
2. LED driver on Trats2 board (Maxim 77693).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Enable support for Maxim 8997 Multi Functional Device present on Trats and
Origen boards by toggling on drivers: charger, haptic motor,
LED, RTC and extcon.
This allows to test and usage of these boards with exynos config.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
The purpose of this patch is to start the process of replacing both
ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS.
RENESAS seems to be a more appropriate name than SHMOBILE for the majority
of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer)
ARM64 based SoCs.
This patches only addresses 32-bit ARM based SoCs. Proposed support for
the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects
ARCH_SHMOBILE.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Defconfig updates are kept separate from other branches mostly to avoid
conflicts between the different categories (driver branch enabling something
that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware platforms.
multi_v7_defconfig, our "generic" config for most 32-bit platforms has
been gone through by Marvell Berlin maintainers and added most options
they need to run on their hardware. Broadcom NSP is also added there,
and the new Atmel SAMA5D2 (added last release). Rockchip also has display
and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KsDh
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig updates are kept separate from other branches mostly to
avoid conflicts between the different categories (driver branch
enabling something that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware
platforms. multi_v7_defconfig, our "generic" config for most 32-bit
platforms has been gone through by Marvell Berlin maintainers and
added most options they need to run on their hardware. Broadcom NSP
is also added there, and the new Atmel SAMA5D2 (added last release).
Rockchip also has display and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: multi_v7_defconfig: enable UniPhier I2C drivers
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
ARM: exynos_defconfig: Disable simplefb support
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable USB Video Class support
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin
ARM: tegra: Update multi_v7_defconfig
ARM: multi_v7_defconfig: Add Atmel SDHCI device
ARM: multi_v7_defconfig: Add Atmel Flexcom device
ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig
ARM: at91/defconfig: update at91_dt defconfig
ARM: at91/defconfig: update sama5 defconfig
ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
ARM: configs: update lpc18xx defconfig
ARM: socfpga_defconfig: enable fpga manager
...
Again we have a sizable (but not huge) cleanup branch with a net delta of about
-3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now gone
completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the above are
the major pieces.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uI7R
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"Again we have a sizable (but not huge) cleanup branch with a net delta
of about -3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now
gone completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board
file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the
above are the major pieces"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
ARM: Remove __ref on hotplug cpu die path
ARM: Remove open-coded version of IRQCHIP_DECLARE
arm: omap2: board-generic: use omap4_local_timer_init for AM437x
ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
ARM: OMAP: Remove duplicated operand in OR operation
clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
ARM: pxa: raumfeld: make some variables static
ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
ARM: OMAP2+: Rename cpu_is macros to soc_is
arm: omap2: timer: limit hwmod usage to non-DT boots
arm: omap2+: select 32k clocksource driver
clocksource: add TI 32.768 Hz counter driver
arm: omap2: timer: rename omap_sync32k_timer_init()
arm: omap2: timer: always call clocksource_of_init() when DT
arm: omap2: timer: move realtime_counter_init() around
...
Pull drm updates from Dave Airlie:
"I Was Almost Tempted To Capitalise Every Word, but then I decided I
couldn't read it myself!
I've also got one pull request for the sti driver outstanding. It
relied on a commit in Greg's tree and I didn't find out in time, that
commit is in your tree now so I might send that along once this is
merged.
I also had the accidental misfortune to have access to a Skylake on my
desk for a few days, and I've had to encourage Intel to try harder,
which seems to be happening now.
Here is the main drm-next pull request for 4.4.
Highlights:
New driver:
vc4 driver for the Rasberry Pi VPU.
(From Eric Anholt at Broadcom.)
Core:
Atomic fbdev support
Atomic helpers for runtime pm
dp/aux i2c STATUS_UPDATE handling
struct_mutex usage cleanups.
Generic of probing support.
Documentation:
Kerneldoc for VGA switcheroo code.
Rename to gpu instead of drm to reflect scope.
i915:
Skylake GuC firmware fixes
HPD A support
VBT backlight fallbacks
Fastboot by default for some systems
FBC work
BXT/SKL workarounds
Skylake deeper sleep state fixes
amdgpu:
Enable GPU scheduler by default
New atombios opcodes
GPUVM debugging options
Stoney support.
Fencing cleanups.
radeon:
More efficient CS checking
nouveau:
gk20a instance memory handling improvements.
Improved PGOB detection and GK107 support
Kepler GDDR5 PLL statbility improvement
G8x/GT2xx reclock improvements
new userspace API compatiblity fixes.
virtio-gpu:
Add 3D support - qemu 2.5 has it merged for it's gtk backend.
msm:
Initial msm88896 (snapdragon 8200)
exynos:
HDMI cleanups
Enable mixer driver byt default
Add DECON-TV support
vmwgfx:
Move to using memremap + fixes.
rcar-du:
Add support for R8A7793/4 DU
armada:
Remove support for non-component mode
Improved plane handling
Power savings while in DPMS off.
tda998x:
Remove unused slave encoder support
Use more HDMI helpers
Fix EDID read handling
dwhdmi:
Interlace video mode support for ipu-v3/dw_hdmi
Hotplug state fixes
Audio driver integration
imx:
More color formats support.
tegra:
Minor fixes/improvements"
[ Merge fixup: remove unused variable 'dev' that had all uses removed in
commit 4e270f0880: "drm/gem: Drop struct_mutex requirement from
drm_gem_mmap_obj" ]
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/i915: Fix locking around GuC firmware load
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
...
Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer. There will be separate options to select Mixer
and HDMI. Adding new option to defconfig before Kconfig will allow to keep
bisectability.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
These two drivers were merged into the I2C sub-system by
commit dd6fd4a327 ("i2c: uniphier: add UniPhier FIFO-less I2C driver")
and commit 6a62974b66 ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C
driver").
Enable them from arch/arm/configs/multi_v7_defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- exynos_defconfig
: enable USB Video Class for Peach boards.
: enable DWC2 USB and USB ethernet gadget
: enable LEDs (LEGS_GPIO and LEDS_PWM)for Odroid-XU3/XU4
: enable RTL8152 for Odroid-XU4
: enable WiFi-Ex as a module instead of build-in
: disable temporal simplefb support (FB_SIMPLE) because
exynos DRM driver can support it now
- multi_v7_defconfig
: enable DWC2 USB and USB ethernet gadget
: enable RTL8152 for Odroid-XU4
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJWKqIKAAoJEA0Cl+kVi2xqBtAQAKVk3M9Un8H6kLJvSSjKmlgi
1GCg2i642DLDKUBt4KKgXoOH6u7EUDciD/budO8QTottuCRJHgDwxgG4I7+1fCb7
nmvZOCUQExJJct2xmBDl9ZpPihPsnhc4vr0fumh/Zbz+zZcqI1o5jdTHGI4i8z6C
OIEtK36DYWieflrcRg4Wa1FkguV4J+HfJqUYm8uLFmXcg+zGZo/V3d4MVOSNpHGo
QV38KoPHRQHmIYggKLKT//jPX7L9QxCYAYlczCxXppmTt3WXhvLzT+Z5ccZIgHb1
zcodYpU6xuVHUT/W68J9wYxjob32FO970603lW6952JX13ndtzj5dKLKnGwWR8cA
CEFPvSq9JhkQJ7fDPH/PePTWbaTMO4s8WkxhuKm/peDN9tLg+xUOZLHby95DgI5E
oO7TTfiZr09x39jiQekQn9/hqW1sYPwaB/qkBkP1uDMynpwqRWRD6hOTfocjFxW+
iw82lldJc1kqnAIK3PKyfcL/lJ3mBdP4vYbUI9NIt6TsJw7snwj2VD5Vijfwcnt5
swQejvQcx7IVBVgdSBaLGufahbLWjcI4z+VCpuBqtO9Z6CydoQA/nWgYy0Bf6bqm
HQ0zZBUocyAvrjYi/XDikvq+mc7o34vPdeE7vq+4MoNc+g4RqFpdBYFe3ZyQIuV+
DqPvvNfCsQW4d92bKwR8
=YhpK
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig
Samsung defconfig udpates for v4.4
- exynos_defconfig
: enable USB Video Class for Peach boards.
: enable DWC2 USB and USB ethernet gadget
: enable LEDs (LEGS_GPIO and LEDS_PWM)for Odroid-XU3/XU4
: enable RTL8152 for Odroid-XU4
: enable WiFi-Ex as a module instead of build-in
: disable temporal simplefb support (FB_SIMPLE) because
exynos DRM driver can support it now
- multi_v7_defconfig
: enable DWC2 USB and USB ethernet gadget
: enable RTL8152 for Odroid-XU4
* tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
ARM: exynos_defconfig: Disable simplefb support
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable USB Video Class support
Signed-off-by: Olof Johansson <olof@lixom.net>
Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Odroid-XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Marvell WiFi-Ex driver tries to load a firmware on probe. So if the
driver is built-in and probed before a firmware is available, this is
not loaded and the chip does not work.
This happens for example if an initramfs isn't used since the driver is
probed before the root filesystem is mounted.
Change the default config since the driver isn't needed for machines to
boot and is more convenient to have it enabled as a module to avoid
requiring an initramfs or to have the firmware built into the kernel.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The simplefb driver allows the kernel to render on a pre-allocated
buffer that's been initialized by firmware before the kernel boots.
This option was enabled to have display working on the Exynos5250
Snow Chromebook by commit da9d0fbf5e ("ARM: exynos: defconfig
update") since proper DRM/KMS support did not exist at that time.
But now that the Exynos DRM driver has support for this hardware,
there is no need to have simplefb enabled. In fact, if a user has
a u-boot that injects the simplefb dev node to the FDT before pass
it to the kernel, display won't be properly initialized and only a
blank screen will be shown since there isn't a proper handoff from
the simplefb driver to the Exynos DRM driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Tested-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and
LEDS_PWM allows monitoring the board alive state (heartbeat) and
MMC/SDcard IO usage.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
[k.kozlowski: Rewritten the commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in
Silicon Motion USB UVC WebCam. Enable support for the USB Video Class
driver and its needed media Kconfig symbols so the camera is supported.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
A bunch of defconfig changes to enable support for new drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g7fp
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.4
A bunch of defconfig changes to enable support for new drivers.
* tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi_defconfig: enable MODULE_UNLOAD
can: Allwinner A10/A20 CAN Controller support - Defconfig
can: Allwinner A10/A20 CAN Controller support - Defconfig
ARM: sunxi_defconfig: Enable LRADC keys (KEYBOARD_SUN4I_LRADC)
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the v7 defconfig witth usefull config for the Seagate NAS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYiY+EACgkQCwYYjhRyO9WANACfdPTeOBofTpIFChzcNlg823Su
BIYAn1XQ+oxXKt/mmh0xWRJGcIEKQJPP
=+DPM
-----END PGP SIGNATURE-----
Merge tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu config for 4.4 (part 1)
Update the v7 defconfig witth usefull config for the Seagate NAS
* tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable options for Seagate NAS in mvebu_v7_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them:
* The pxa168 Ethernet driver is added as a loadable module.
* The Berlin ADC driver is added as a loadable module.
* Both the Berlin USB PHY and SATA PHY drivers are added,
built-in, as they are required for the already available USB
and SATA functionalities in multi_v7_defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable some options that have recently been enabled on Tegra platforms:
* TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri
* SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The Flexcom device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
CONFIG_FIXED_PHY is needed to have Ethernet working on STi boards.
Select it as built-in since RootFS is accessible from NFS on these boards.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable SPIFI Flash and JFFS2 to support rootfs on Flash memory
- Enable USB Phy, mass storage and SCSI to support USB memory
- Enable PCF857x and JC42 I2C devices found on Hitex board
- Enable PL172 to support memory mapped NOR Flash
- New LPC18xx drivers: I2C, Watchdog, SCT PWM and RTC
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable fpga manager framework and low level driver for
socfpga in socfpga_defconfig
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables the following options needed by the Seagate
Personal Cloud 1 and 2-Bay and the Seagate NAS 2 and 4-Bay:
SATA_AHCI
POWER_RESET_GPIO
RTC_DRV_DS1307
RTC_DRV_PCF8563
Additionnally this patch also enables NEW_LEDS which was missing for
some reasons.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Similar to the power management situation on Rockchip boards, there are
two common RTC setups. For boards using the RK808 chip as a PMIC that
chip also serves as the RTC, while boards using the ACT8846 typically use
the Haoyu Microelectronics HYM8563 chip as their RTC.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most Rockchip SoCs have a DesignWare HS OTG USB 2.0 controller, enable
the driver for the Rockchip USB 2.0 PHY to make that functional.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable options needed for HDMI out on rockchip: DRM driver, Rockchip
DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM
driver).
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rockchip boards seem to have two common regulator setups. Various board
used the Active Semi act8846 often in combination with Silergy syr82x
regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc),
while others use regulator part of the Rockchip RK808 chip (e.g. the
various Veyron based chromebooks, Chipspark Popmetal etc)
Enable all these regulators.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable Rockchip I2C, SPI, PWM, thermal drivers.
Builtin are I2C (as it often required to control the pmic) and Thermal
drivers (to prevent thermal damage). SPI and PWM drivers configured as
modules
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds few missing essential configs in the multi_v7_defconf,
absense of some configs like PINCTRL_APQ8064 would prevent the board from
getting access to serial.
cc: Kevin Hilman <khilman@kernel.org>
cc: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "Broadcom defconfig changes for v4.4" from Florian Fainelli:
This pull request contains the following changes for the multi_v7_defconfig:
- Jon adds support for the NorthStar Plus SocS to the multi_v7_defconfig file
* tag 'arm-soc/for-4.4/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Add NSP to defconfig
* Remove now non-existent MACH_MARZEN from defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iUhT
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Defconfig Updates for v4.4" from Simon Horman:
* Remove now non-existent MACH_MARZEN from defconfigs
* tag 'renesas-defconfig-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Remove Marzen
ARM: shmobile: Remove Marzen from shmobile_defconfig
Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
CONFIG_VMSPLIT_2G was added to mx5_defconfig by commit 06965c39b4
("ARM i.MX5: update defconfig") to fix an issue where mx53 was not
detecting the full 1GiB memory range.
However, as explained by Russell King [1] the correct fix is to select
CONFIG_HIGHMEM.
imx_v6_v7_deconfig inherited such option from mx5_defconfig.
As imx_v6_v7_deconfig has CONFIG_HIGHMEM=y, we should no longer
select such non-standard CONFIG_VMSPLIT_2G option.
[1] http://www.spinics.net/lists/arm-kernel/msg137839.html
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add basic options to bootup on systemd based distros such as debian.
See http://cgit.freedesktop.org/systemd/systemd/tree/README#n38 for
more information.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Sync up the defconfig to savedefconfig output. easier to integrate
deltas as a result.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Loadable module support is enabled so we should allow unloading
modules too. This also allows lsmod to show values other than "-2" in
the "Used by" column.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Defconfig multi_v7 for Allwinner A10/A20 CAN driver
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Defconfig sunxi for Allwinner A10/A20 CAN driver
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This enables tca6424a GPIO expander driver that in turn enables
TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm.
In other words, it makes HDMI work on OMAP5 uevm.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Update the Tegra default configuration for the following features:
- expose hardware/virtual IRQ mapping via debugfs
- WM9712 audio/touch controller as found on Colibri T20
- sysfs interface for GPIOs
- NFS client support for NFS version 4
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As a result of rebuilding the configuration the following symbols are
removed:
- EXT4_FS: ext3 has finally been removed from the kernel. ext4
provides feature parity and can be used to mount ext3 filesystems.
EXT3_FS selects EXT4_FS.
- EXT3_DEFAULTS_TO_ORDERED: Removed as part of the ext3 filesystem
removal.
- IPV6: IPv6 is now built-in by default
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
One of the lines from PCF857x is connected to the vdd line of MMC1
in DRA74x and DRA72x EVMs and is modelled as a regulator. If PCF857x
is not made as built-in, the regulator_get in omap_hsmmc fails making
it difficult to use MMC1 as rootfs.
Make PCF857x built-in.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kill of the defconfig bits now when the marzen-reference board code is gone.
Based on work by Magnus Damm.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kill of the defconfig bits now when the marzen-reference board code is gone.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is a collection of a few late fixes and other misc. stuff that
had dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates.
There's one conflict with drivers/cpufreq/exynos-cpufreq.c because
it's now been completely removed, but there were some fixes that hit
mainline in the meantime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIbBAABAgAGBQJV8fkAAAoJEFk3GJrT+8Zllf8P9jj3+TnvbJS/8bWoQoB7BRUZ
LZPgi2+sBXylrBV60uQdyodiTHQUMZhbL7GvgEVG0z6yyin7nyijqNkulTbQbWmg
WhumLNCNcs8vlZegA/corbwgcVC7FkjOP97HveTe2mgwZ+GaXj9qMRQzBsMqSXEo
4890ZeP1nWBTP42oXOQHkNyKWFBjuERK0dTw2MXj7WE0/Ag8i7ERp76uJQdQ7V5O
BpNRwxp3vSCky8rxbpD/avWdlspv1yZGBQyLeIreVq2YQFojvT36K8wHcf6iWBT/
pzGGV/uZM7MnrGZdqSfVEMDHl7Z2s7Ls+sv5F6Md7ErnVDerHGRjw/6lJDjbeH7u
trucpsuhz5yhTjpZssGHH2NT8pWxxh8M+AaNOiiH8PuYESAbPAmWLpWkn+648bIn
P++Z90DIyfNEqnNSMHkcQYpVt8zc4g75gZfTIIsXLB+DLgzgSK8ergrfyRN/O0zj
oFY35g3wHdgisnGve+BAW30zTZtP19TMT36OltWjIkjuRZC29PS2vkH8eTETdVXx
01f/qcpbB1L1rXfIBjNkjx81j89XPd68JIBfctTF5QBOAGm/Dix6tj2mU/N7TNu5
TrBmD3CXdOQbCPaoK/qWX7/b11IN/XOlGL06hhYwbSdvCVy7rNccApXvfnrDWziK
Ly923FP1OB7h0Kk1cmo=
=85Ck
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
...
PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4,
OMAP5 and DRA7 SoCs. Enable it here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
With the SA1100 and PXA RTC drivers be mutually exclusive and no
longer sharing hardware, PXA27x/PXA3xx platforms must use the PXA RTC
driver as the SA1100 platform device is no longer registered.
This change should be almost transparent to userspace. Former users of
pxa-rtc should be aware that 2 RTCs will be available on their kernels,
rtc0 being sa1100-rtc and rtc1 being pxa-rtc. Any userspace relying on
the fact that rtc0 was pxa-rtc should be fixed.
As a consequence:
- the first reboot after the switch will have the wrong time,
- on dual boot platform where the other OS programs some logic into the
sa1100 rtc IP, a lack of fix in userspace, ie. a kernel changing
sa1100-rtc thinking it is pxa-rtc could have dire consequence, such
as wiping the other OS data partition.
(Thanks to Robert Jarmik for help on the above commit text.)
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm for 4.3. Nouveau is
probably the biggest amount of changes in here, since it missed 4.2.
Highlights below, along with the usual bunch of fixes.
All stuff outside drm should have applicable acks.
Highlights:
- new drivers:
freescale dcu kms driver
- core:
more atomic fixes
disable some dri1 interfaces on kms drivers
drop fb panic handling, this was just getting more broken, as more locking was required.
new core fbdev Kconfig support - instead of each driver enable/disabling it
struct_mutex cleanups
- panel:
more new panels
cleanup Kconfig
- i915:
Skylake support enabled by default
legacy modesetting using atomic infrastructure
Skylake fixes
GEN9 workarounds
- amdgpu:
Fiji support
CGS support for amdgpu
Initial GPU scheduler - off by default
Lots of bug fixes and optimisations.
- radeon:
DP fixes
misc fixes
- amdkfd:
Add Carrizo support for amdkfd using amdgpu.
- nouveau:
long pending cleanup to complete driver,
fully bisectable which makes it larger,
perfmon work
more reclocking improvements
maxwell displayport fixes
- vmwgfx:
new DX device support, supports OpenGL 3.3
screen targets support
- mgag200:
G200eW support
G200e new revision support
- msm:
dragonboard 410c support, msm8x94 support, msm8x74v1 support
yuv format support
dma plane support
mdp5 rotation
initial hdcp
- sti:
atomic support
- exynos:
lots of cleanups
atomic modesetting/pageflipping support
render node support
- tegra:
tegra210 support (dc, dsi, dp/hdmi)
dpms with atomic modesetting support
- atmel:
support for 3 more atmel SoCs
new input formats, PRIME support.
- dwhdmi:
preparing to add audio support
- rockchip:
yuv plane support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
...
With recent MUSB changes we can now build in support for multiple
DMA implementations. So let's enable DMA by default to make life
easier for distro use.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We mostly keep defconfigs updates on a separate branch due to their tendency
to conflict between platforms and this encourages more careful separation of
code changes and config changes.
Most updates here are minor tweaks, enabling new drivers for various platforms,
and so on. Renesas also removed one defconfig (marzen_defconfig).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsmT
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We mostly keep defconfigs updates on a separate branch due to their
tendency to conflict between platforms and this encourages more
careful separation of code changes and config changes.
Most updates here are minor tweaks, enabling new drivers for various
platforms, and so on. Renesas also removed one defconfig
(marzen_defconfig)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: add TC2 PM support to multi_v7_defconfig
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
ARM: at91/defconfig: at91_dt: remove ARM_AT91_ETHER
ARM: at91/defconfig: at91_dt: enable DRM hlcdc support
ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
ARM: multi_v7_defconfig: Select MX6UL and MX7D
ARM: prima2_defconfig: enable build for hwspinlock
ARM: prima2_defconfig: enable build for RTC
ARM: prima2_defconfig: enable build for misc input
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
ARM: prima2_defconfig: fix the outdated defconfig
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
ARM: defconfig: orion5x: add DT support
ARM: qcom_defconfig: Enable options for KS8851 ethernet
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's PWM driver
...
This is the usual large batch of DT updates. Lots and lots of smaller
changes, some of the larger ones to point out are:
- Rockchip veyron (Chromebook) support, as well as several other new boards
- DRM support on Atmel AT91SAM9N12EK
- USB additions on some Allwinner platforms
- Mediatek MT6580 support
- Freescale i.MX6UL support
- Cleanups for Renesas shmobile platforms
- Lots of added devices on LPC18xx
- Lots of added devices and boards on UniPhier
There's also some dependent code added here, in particular some branches
that are primarily merged through the clock tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=D2Pm
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"Ladies and gentlemen, we proudly announce to you the latest branch of
ARM device tree contents for the mainline kernel. Come and see, come
and see!
No less than twentythree thousand lines of additions! Just imagine the
joy you will have of using your mainline kernel on newly supported
hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or
UniPhier hardware!
For those of you feeling less adventurous, added hardware support on
platforms such as TI DM814x and Gumstix Overo platforms might be more
of your liking.
We've got something for everyone here!
Ahem. Cough. So, anyway...
This is the usual large batch of DT updates. Lots and lots of smaller
changes, some of the larger ones to point out are:
- Rockchip veyron (Chromebook) support, as well as several other new boards
- DRM support on Atmel AT91SAM9N12EK
- USB additions on some Allwinner platforms
- Mediatek MT6580 support
- Freescale i.MX6UL support
- cleanups for Renesas shmobile platforms
- lots of added devices on LPC18xx
- lots of added devices and boards on UniPhier
There's also some dependent code added here, in particular some
branches that are primarily merged through the clock tree"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits)
ARM: tegra: Add gpio-ranges property
ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
ARM: tegra: Add Tegra124 PMU support
ARM: tegra: jetson-tk1: Add GK20A GPU DT node
ARM: tegra: venice2: Add GK20A GPU DT node
ARM: tegra: Add IOMMU node to GK20A
ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
ARM: tegra: Add entries for cpufreq on Tegra124
ARM: tegra: Enable the DFLL on the Jetson TK1
ARM: tegra: Add the DFLL to Tegra124 device tree
ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes
ARM: dts: rockchip: correct regulator power states for suspend
ARM: dts: rockchip: correct regulator PM properties
ARM: dts: vexpress: Use assigned-clock-parents for sp810
pinctrl: tegra: Only set the gpio range if needed
arm: boot: dts: am4372: add ARM timers and SCU nodes
ARM: dts: AM4372: Add the am4372-rtc compatible string
ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
...
A large cleanup branch this release, with a healthy 10k negative line delta.
Most of this is removal of legacy (non-DT) support of shmobile
platforms. There is also removal of two non-DT platforms on OMAP,
and the plat-samsung directory is cleaned out by moving most of the
previously shared-location-but-not-actually-shared files from there to
the appropriate mach directories instead.
There are other sets of changes in here as well:
- Rob Herring removed use of set_irq_flags under all platforms and
moved to genirq alternatives
- A series of timer API conversions to set-state interface
- ep93xx, nomadik and ux500 cleanups from Linus Walleij
- __init annotation fixes from Nicolas Pitre
+ a bunch of other changes that all add up to a nice set of cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=acy4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"A large cleanup branch this release, with a healthy 10k negative line
delta.
Most of this is removal of legacy (non-DT) support of shmobile
platforms. There is also removal of two non-DT platforms on OMAP, and
the plat-samsung directory is cleaned out by moving most of the
previously shared-location-but-not-actually-shared files from there to
the appropriate mach directories instead.
There are other sets of changes in here as well:
- Rob Herring removed use of set_irq_flags under all platforms and
moved to genirq alternatives
- a series of timer API conversions to set-state interface
- ep93xx, nomadik and ux500 cleanups from Linus Walleij
- __init annotation fixes from Nicolas Pitre
+ a bunch of other changes that all add up to a nice set of cleanups"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits)
ARM/fb: ep93xx: switch framebuffer to use modedb only
ARM: gemini: Setup timer3 as free running timer
ARM: gemini: Use timer1 for clockevent
ARM: gemini: Add missing register definitions for gemini timer
ARM: ep93xx/timer: Migrate to new 'set-state' interface
ARM: nomadik: push accelerometer down to boards
ARM: nomadik: move l2x0 setup to device tree
ARM: nomadik: selectively enable UART0 on boards
ARM: nomadik: move hog code to use DT hogs
ARM: shmobile: Fix mismerges
ARM: ux500: simplify secondary CPU boot
ARM: SAMSUNG: remove keypad-core header in plat-samsung
ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
ARM: SAMSUNG: local backlight header in mach-s3c64xx
ARM: SAMSUNG: local ata-core header in mach-s3c64xx
ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
ARM: SAMSUNG: local spi-core header in mach-s3c24xx
ARM: SAMSUNG: local nand-core header in mach-s3c24xx
...
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xW1n
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.3-rc1
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
* tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
Signed-off-by: Olof Johansson <olof@lixom.net>
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJVzOCKAAoJEA0Cl+kVi2xqf6sQAIYMjcKFNT1g4MrJVflGLTnx
06OZ5mLGmXn6xMf8mlFWRGs7mDZs1E6uVAM64zRbnXoQEQpi5UkwEX44/8ViywLJ
9vOVMXdzdhnaH1eOUsfF6Ny+IWQAfEViXufEOZzU0UPHFHSwV2Mu/I0aj864Xhpa
AzrNgRhXJS9NphB0iXIZGdRtH5T0kydfIe1myuGiW5Ts0oEQDTncLF0J64kjDd3F
sFwwIN7bAW+JK9ovyZY6w68WNfpAc/csvhC8ieBwviS2Oy0LT23u3EROYxYrfZOX
ZoxvjkfRZLpCbjwC//LIzt8nrffEzjrZgN2SZb1hhDaH4d9z18KUH5iew/Nqphjf
bj4ydt52WfMnEWG5l5+SsMHJ7sbBQUxcxfCVoEqmfSkmZZS5rSuY9kcAkRDk6iQ5
zprHwbvvnJKz8QiLYYalcMLKxVuaMnQXwLM5bfvGf7QYOKJgpLJEvHpM/bQbgQa4
IuviiSVUhCoMt2zyhT2/5bins0HBchZma+7Zr5NSMcvGNVb0UqGNobPkEmZZ2DVX
7nnMMmxnGE9DNRKtDlhrF+8XLla4RxeSH15GLPUQJ95lWx6nvlNvV6oxZvx7XTpl
6t3XuoPFqmeopu9htSFnEwVVmtcKenlVLcwaM2SgoLrcq8BWJ8LZm3dfYg1uCHKK
z1i7krNCGgHn2EUX7G+2
=0McP
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung defconfig updates for v4.3
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
* tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable cpufreq-dt driver
ARM: multi_v7_defconfig: Enable max77802 regulator
ARM: exynos_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3
Signed-off-by: Olof Johansson <olof@lixom.net>
Without this, the multi_v7_defconfig kernel cannot boot all CPUs
nor do deep cpuidle power saving on a TC2 board.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Dee7
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.3-rc1
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/bridge: Put Kconfig entries in a separate menu
drm/panel: Add support for LG LG4573 480x800 4.3" panel
drm/panel: Add display timing for Okaya RS800480T-7X0GP
of: Add Okaya Electric America vendor prefix
drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
drm/panel: simple: Add support for AUO B080UAN01
drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
drm/bridge: Add vendor prefixes
drm/panel: Add Samsung prefix to panel drivers
drm/exynos: Remove PTN3460 dependency
Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.
v2: fix object name for dw-hdmi (Fabio Estevam)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Tegra-specific configuration options to multi_v7_defconfig:
* HDA controller and codec support
* Watchdog support
* Nouveau (for GK20A GPU) support
Signed-off-by: Thierry Reding <treding@nvidia.com>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
CONFIG_ARM_AT91_ETHER doesn't exist anymore, both drivers have been merged
in the macb driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.
Enable it along with default ondemand governor to conserve the energy,
reduce temperature while maintaining acceptable performance.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks
use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides
other devices, a set of regulators that can be controller over I2C.
Commit f3caa529c6 ("ARM: multi_v7_defconfig: Enable max77802 regulator,
rtc and clock drivers") was supposed to enable the config option for the
regulator driver as a module but the final version that landed did not
include this. The commit was modified and the REGULATOR_MAX77802 removed
since it was thought to be useless.
Unfortunately that's not the case for the mentioned reason above so this
patch enables the needed Kconfig option.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: fixed ordering according to make savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SkuD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.3
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Signed-off-by: Olof Johansson <olof@lixom.net>
Improve dt support for orion5x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlW7QLAACgkQCwYYjhRyO9VAqgCePD1+poLPe2yvEG0tlVO+Riq4
DLMAn3OoOO5UaISBXMBu/fPsd80UGDbH
=Yrv4
-----END PGP SIGNATURE-----
Merge tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu config changes for v4.3 (part #2)
Improve dt support for orion5x
* tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu:
ARM: defconfig: orion5x: add DT support
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Atmel-isi and ov2640 driver in defconfig
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: make SOC_CAMERA_OV2640 selected as a module]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable fixed voltage regulator in shmobile_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9Yan
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Second Round of Renesas ARM Based SoC Defconfig Updates for v4.3
* Enable fixed voltage regulator in shmobile_defconfig
* tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
System) drivers by default. EXTCON is needed by the updated sun4i USB
PHY driver.
While at it, enable FHANDLE, which is needed by systemd and newer
versions of udev. Also enable CGROUPS for systemd.
And get rid of POWER_RESET, as the sun6i power reset driver has been
removed in favor of proper sun6i watchdog support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable built-in support for its driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable module support for its driver
and also for the needed Exynos ADC driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The old drivers/usb/phy/phy-samsung-usb{2,3} are now deleted since
were replaced by newer drivers that use the Generic PHY framework
but their Kconfig options were left over in multi_v7_defconfig.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable
sound on Odroid-XU3 board using the max98090 audio codec.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This is selected by MACH_MARZEN which is enabled in shmobile_defconfig,
however, MACH_MARZEN is going away along with the board code it enables.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Let MX6UL and MX7D SoCs be selected by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
this patch is againest v4.2-rc1, by doing:
$ make ARCH=arm prima2_defconfig
$ make ARCH=arm savedefconfig
$ cp defconfig arch/arm/configs/prima2_defconfig
Signed-off-by: Barry Song <Baohua.Song@csr.com>
It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the RPM and RPM regulator drivers as well as the KS8851
ethernet driver so that ethernet works on MSM8960 CDP.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
SPI NOR, CPTS, touchscreen and ADC used on am335x, am437x
and ra7 devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jALL
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "defconfig changes for v4.3" from Tony Lindgren:
Few defconfig changes for omap2plus_defconfig to enable
SPI NOR, CPTS, touchscreen and ADC used on am335x, am437x
and ra7 devices.
* tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR
ARM: omap2plus_defconfig: enable support for TI CPTS
ARM: omap2plus_defconfig: enable support for TI touchscreen
ARM: omap2plus_defconfig: enable support for TI ADC
Signed-off-by: Olof Johansson <olof@lixom.net>
resolution timers, and to by default enable and compile
all board variants now that we can have a single kernel,
and enable all EP93xx-specific drivers that sit in various
sites across the kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVqNFLAAoJEEEQszewGV1zzmsP+gNi6uiVuHFSChs+eGnS/GVT
I/M57BVMoWO30WiqpfR9yihmfDmZc65LVZ4pmkfUNLMVuDvrJ/6/MaiSPmcrUzwC
3NC7H8aVypjx6k/9r8XS7tA2sVUkN61LCKuQu2PhlLWRLH0YEmXMpHkCP38iLe8B
QQ/D3k1coq5OlzG6juz9jMJXlaBPw+bVNQ4ZceRs+WnE3FWW7243K/PTGG7Na6c/
dcMO49WJJ0Q2QqVvLPE3RN/m3KWm+DD+2aiu5DTmhZ4VqGCTWokjQG4u2XAvdKdG
CFGkzm4sP+uv+ubjGxjhcAkQwCNKvvfrXPx6tCfC6x1ywW9tN5y1ATdNszy4hv96
J/HNULVAbf01E5sWiB15MNCIQKGRa31jss2NQfXrhLEHrT9ujxqm+P5cmlzvWQas
ILEXEmd1n/XjMYox0TXMsoclxiK4U583l6xcaR47twRevpQl6qvvF09YPaKSdz7G
FW8BY2N2gChiUGcLtzFfTuHc7D9ULuvhX6U+27lPi9ADEca+w96y0ELmRL4cdq6Q
wsubxcHaAoDID6UnoG2G1MBkm0XLI7UlCulIoHgw90alUKVBWZHkXddILu5E/b/z
pmVVzrXb1tTp25byZJLtG/5ZUUvnmMHYv9u9zKrssLV6OaWSvPPTPwzcE6bxjIsX
vbzorh6r+8E000voyJwd
=ebxc
-----END PGP SIGNATURE-----
Merge tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig
Merge "EP93xx defconfig changes" from Linus Walleij:
This updates the EP93xx defconfig to use NO_HZ and high
resolution timers, and to by default enable and compile
all board variants now that we can have a single kernel,
and enable all EP93xx-specific drivers that sit in various
sites across the kernel.
* tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: ep93xx: add framebuffer to the defconfig
ARM: ep93xx: add DMA engine to the defconfig
ARM: ep93xx: add GPIO I2C to defconfig
ARM: ep93xx: add LEDs and triggers to defconfig
ARM: ep93xx: enable SIM.ONE MMC/SD hardware
ARM: ep93xx: enable all boards in the EP93xx defconfig
ARM: ep93xx: activate NO_HZ and high-res timers
Signed-off-by: Olof Johansson <olof@lixom.net>
update mvebu_v7_defconfig with features needed for Armada 388 GP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlWoKuAACgkQCwYYjhRyO9XPuACfbqntlfTFA3ZMSchcFfWTuv9B
vfUAn2bvhZGk8ug2XTumCwDXlnkfovND
=VRBf
-----END PGP SIGNATURE-----
Merge tag 'mvebu-config-4.3-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "ARM: mvebu: config changes for v4.3" from Gregory Clement:
mvebu config changes for v4.3 (part #1)
update mvebu_v7_defconfig with features needed for Armada 388 GP
* tag 'mvebu-config-4.3-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP
Signed-off-by: Olof Johansson <olof@lixom.net>
The EP93xx SoC has a framebuffer driver, let's add this to the
defconfig so we can have graphics working out of the box.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Several boards can make use of the DMA engine on the EP93xx
so let's enable this by default in the defconfig.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some of the EP93xx boards have I2C devices on bit-banged GPIO
I2C, so add this to the defconfig.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The EP93xx has two designated LEDs (not always connected): a
green and a red one. These are registered in the core, so let's
enable the driver and some triggers.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SIM.ONE has a MMC card connected to the SPI host. This card
usually hosts an EXT4 root file system. Enable these options in
the defconfig so the default ompiled kernel will work
out-of-the-box.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With PATCH_PHYS_TO_VIRT we can support all EP93xx variants
in a single image, so enable all board variants in the defconfig
for simplicity and build coverage.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Let's set the EP93xx to NO_HZ mode and activate the high-res
timers now that we have GENERIC_CLOCKEVENTS.
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now when the Marzen legacy board code is removed also
get rid of the marzen_defconfig file. Existing users
shall move over to shmobile_defconfig.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
M25P80 driver provides support for most common SPI NOR devices.
These devices are commonly found on TI EVMs for AM437x and DRA7x
SoCs.
Enable support for this driver in defconfig for omap2plus devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
CPTS module of CPSW IP enables timestamp synchronization
using PTP. Enable CPTS feature of CPSW driver.
Available on AM335x, AM437x and DRA7x SoCs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable support for on-chip resistive touchscreen m found on AM335x and
AM437x devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable support for on-chip ADC found on AM335x and
AM437x devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch enables Renesas DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
More and more boards are moving to have audio support via simple-card.
At the same time enable options needed for most am335x and am43xx board for
audio support: McASP and TLV320AIC3X codecs.
The later two has been selected by the CONFIG_SND_AM33XX_SOC_EVM option, but
the aim is to convert all boards to use simple card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2lyB
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Merge "Renesas ARM Based SoC Cleanup for v4.3" from Simon Horman:
* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect
* tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only
ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set
ARM: shmobile: Remove obsolete zboot support
ARM: shmobile: R-Mobile: Remove legacy PM Domain code
ARM: shmobile: Remove unused dma-register.h
ARM: shmobile: Remove legacy SoC code for R-Mobile A1
ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds
ARM: shmobile: Remove legacy armadillo800eva_defconfig
ARM: shmobile: Remove legacy board code for Armadillo-800 EVA
ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5
ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds
ARM: shmobile: Remove legacy kzm9g_defconfig
ARM: shmobile: Remove legacy board code for KZM-A9-GT
ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag
ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding
ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file
Signed-off-by: Olof Johansson <olof@lixom.net>
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial
driver").
Enable it from multi_v7_defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
build in snvs powerkey
build in syscon power off support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The old warp board revision had hardware issues that prevented
the RTS/CTS lines to work with the Bluetooth module.
Tha latest rev1.12 fixes this problem, so now we should better use
CONFIG_BT_HCIUART_H4 instead, as it provides a better throughput than
the CONFIG_BT_HCIUART_3WIRE option.
Suggested-by: Arthur Lambert <arthur@dreem.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m0CY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
The Armada 388 GP board has the following hardware features that were
not enabled in mvebu_v7_defconfig:
* An AT24 I2C EEPROM (also used by armada-xp-lenovo-ix4-300d)
* A PCA9555 I2C GPIO expander
* Several fixed regulators
Therefore, this commit adds the necessary options to mvebu_v7_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The legacy board code for Armadillo-800 EVA has been removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The legacy board code for KZM-A9-GT has been removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that we have simplefb support, we can enable it in our defconfig. Also
enable the framebuffer console, so that we are sure that we actually get
something displayed in any case.
And while we're at it, enable the module support.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Commit b2b3a8b934 ("power/reset: Remove sun6i reboot driver") removed
the sun6i reboot driver. But sunxi_defconfig and multi_v7_defconfig
still contain the symbol CONFIG_POWER_RESET_SUN6I that was deprecated
by that commit, so remove it.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and
Cygnus/iProc under mach-bcm, this is enough critical mass to enable it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q6ks
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' into test-merge
ARM: SoC: defconfig updates for v4.2
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
# gpg: Signature made Wed Jun 24 21:32:27 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
Our SoC branch usually contains expanded support for new SoCs and
other core platform code. Some highlights from this round:
- sunxi: SMP support for A23 SoC
- socpga: big-endian support
- pxa: conversion to common clock framework
- bcm: SMP support for BCM63138
- imx: support new I.MX7D SoC
- zte: basic support for ZX296702 SoC
Conflicts:
arch/arm/mach-socfpga/core.h
Trivial remove/remove conflict with our cleanup branch.
Resolution: remove both sides
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZtPK
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' into test-merge
ARM: SoC: platform support for v4.2
Our SoC branch usually contains expanded support for new SoCs and
other core platform code. Some highlights from this round:
- sunxi: SMP support for A23 SoC
- socpga: big-endian support
- pxa: conversion to common clock framework
- bcm: SMP support for BCM63138
- imx: support new I.MX7D SoC
- zte: basic support for ZX296702 SoC
Conflicts:
arch/arm/mach-socfpga/core.h
Trivial remove/remove conflict with our cleanup branch.
Resolution: remove both sides
# gpg: Signature made Wed Jun 24 21:32:12 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
# Conflicts:
# arch/arm/mach-socfpga/core.h
commit dcf9a03bff (ARM: multi_v7_defconfig: Enable PMIC and MUIC
drivers for exynos) mistakenly added an duplicate line for
CONFIG_COMMON_CLK_QCOM=y. Remove it.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- Enable dm9000 as built-in for NFSroot
- Enable dm816x USB phy as a loadable module
- Enable Pixcir touch screen as a loadable module
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QPe9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.2/o2_dc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Few omap2plus_defconfig changes for v4.2 merge window:
- Enable dm9000 as built-in for NFSroot
- Enable dm816x USB phy as a loadable module
- Enable Pixcir touch screen as a loadable module
* tag 'omap-for-v4.2/o2_dc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR
ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module
ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig
* zte/soc:
ARM: zx: Add basic defconfig support for ZX296702
ARM: dts: zx: add an initial zx296702 dts and doc
clk: zx: add clock support to zx296702
dt-bindings: Add #defines for ZTE ZX296702 clocks
Add basic defconfig support to zx SOC, including uart, mmc
and other common config
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- enable DRM_EXYNOS_DSI and DRM_PANEL_S6E8AA0
for full X11 display on Trats2 board
- enable SENSORS_PWM_FAN
to control fan power on Odroid-XU3 board
- enable SENSORS_INA2XX
for power monitor sensor on Odriod-XU3 board
- do savedefconfig
to remove useless configs and check its dependencies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=uILc
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig
exynos_defconfig updates for v4.2
- enable DRM_EXYNOS_DSI and DRM_PANEL_S6E8AA0
for full X11 display on Trats2 board
- enable SENSORS_PWM_FAN
to control fan power on Odroid-XU3 board
- enable SENSORS_INA2XX
for power monitor sensor on Odriod-XU3 board
- do savedefconfig
to remove useless configs and check its dependencies
* tag 'samsung-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3
ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3
ARM: exynos_defconfig: savedefconfig
ARM: exynos_defconfig: Enable display on Trats2 board
Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan
power on Odroid-XU3.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Some of the OMAP based boards e.g. am437x-gp-evm have
the Pixcir touch controller. Enable the related device
driver.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Enable i.MX7D and LS1021A SoC support
- Enable support for WL1271 WIFI/BT, SX8654 I2C touchscreen and PCF8523
RTC, which can be found on Armadeus Systems APF6 and Cubox-i boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVbArDAAoJEFBXWFqHsHzOaMoIAJrdhMHWKpTys4OmQOao0qE1
uHCrGHlAcWGy8xgoA617D3PLahP9QMID9GUFxH8cWRa4ifBEybn9nqyQFU/Sp6CM
cwRNXvscupvnPQcZIbpQlJezaBH2pqm43BOWi5b77/ASdh+xad7JFGniOb6P5L2Q
iplE12VVDkg70t3tOh7lHgrRs5I/1DL3/JSCTh7KEEjxr0wBkR68/b3ONP3eqnhP
txa+mW1fh61l3VZ8qzff8T1yvyft/onoqbzfN9BVITlKDrWe3NSM/jalM9h1o5T3
orlj3rLacJhdSpWUtCK+M8BovdaI549wNk7HnDH1lNzawUJ3m8b7Y1uuAfkAhGI=
=DIH7
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "The i.MX defconfig updates for 4.2" from Shawn Guo:
- Enable i.MX7D and LS1021A SoC support
- Enable support for WL1271 WIFI/BT, SX8654 I2C touchscreen and PCF8523
RTC, which can be found on Armadeus Systems APF6 and Cubox-i boards.
* tag 'imx-defconfig-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards
ARM: config: imx_v6_v7_defconfig add imx7d support
ARM: imx_v6_v7_defconfig: Select LS1021A
ARM: imx_v6_v7_defconfig: Enable RTC PCF8523 support
This is needed for USB on dm816x-evm.
Cc: Bin Liu <binmlist@gmail.com>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: George Cherian <george.cherian@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This ethernet device is used on devkit8000 board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove the generic 8250 config option so that the LPC18xx
specific option gets picked instead.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch does 'savedefconfig' for exynos_defconfig to remove useless
configs and check its dependencies. Sometimes some configs could be
ignored because of the dependencies even they are enabled in defconfig
file manually. So checking the dependencies would be better.
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family,
Exynos5250, Exynos5440 and Exynos542x/5800 family.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
allows detection of overheat and handling this gracefully.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, fuel gauge (max17042),
used on: Trats2,
- s5m/s2mps: RTC, clock,
used on: Arndale, Arndale Octa, Gear 1, Gear 2
This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and
Exynos5250. Enable it in default configuration to reduce energy
consumption.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cypress All Points Addressable (APA) I2C Trackpad is used in the
Samsung Exynos 5250 Snow Chromebook. Build the driver as a module so
the device is supported.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The I2C GPIO arbitration driver is used on the Exynos5250 Snow Chromebook
to arbitrate the access to a I2C bus by the Application Processor or a EC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many Exynos devices have devices attached to their display ports.
This patch enables the needed Kconfig options to support different
configuration such as simple panel, embedded DisplayPort (eDP) to
LVDS bridges and HDMI displays.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rtc-s3c driver supports a range of S3C series Real-Time-Clocks found
on many Samsung SoCs. Build the driver as a module to support these RTC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the Generic PWM Samsung driver as a module to support PWM
devices used in platforms with a Samsung SoC.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the needed Kconfig options to have support for the ChromeOS EC
I2C transport, I2C tunnel and chardev user-space interface.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the needed kconfig options to have support for Samsung USB 2.0
and USB 3.0 PHY drivers to support the USB PHYs found on Exynos SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Maxim max77802 Power Management IC is used on many Exynos machines.
Besides a bunch of regulators, this chip has a Real-Time-Clock (RTC)
and 2-channel 32kHz clock outputs.
Enable the kernel config options to have the drivers for these devices
built as a module.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: removing useless REGULATOR_MAX77802 config]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Build the spi-s3c64xx driver as a module to have support for
the SPI controller in several Samsung SoCs.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Select ARM_SINGLE_ARMV7M in defconfigs of the converted ARMv7-M
platforms.
[arnd: moved the efm32_defconfig change to the patch that
originally introduces the symbol, to avoid intermittent regression]
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the new config symbol ARM_SINGLE_ARMV7M which groups config
symbols used by modern ARMv7-M platforms. This allows supporting
multiple ARMv7-M platforms in one kernel image. However, a common
kernel image requires the combined platforms to share the same
main memory layout to be bootable.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add defconfig for Linux on Vybrid (vf610) on the secondary Cortex-
M4 CPU. The use of a XIP image has been tested which needs to be
loaded (e.g. using the custom m4boot loader) to the end of the
available RAM at address 0x8f000000. The Cortex-M4 has a code-alias
which makes sure that the instructions get fetched through the code
bus (alias starts at 0x00800000 => 0x80800000 in system address).
Hence, to get optimal performance, use 0x0f000000 as XIP_PHYS_ADDR.
This address is additionally shifted by the length of the minimal
loader which is inserted by m4boot. Currently, this offset is 0x80.
The standard DRAM base address is configured to 0x8C000000, which
gives the Cortex-M4 48MiB of RAM.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJVWz/rAAoJEAf03oE53VmQ13wH/1G0Ynxs9CKPvw6QRpt+wRkS
yD03sSjihCKF6AD+8nBtwfOpf2PikzSunAyARLAcbQT4I0K9gqOkqIV8JhNM9CD+
DSIMds60wAWxvem9CWVQzDv+NdYjNA/bke3zYhlLsKrelIJiaAxOnc3SfPWTBaTO
tRS1Gsshb+x+KrXNS2lJh3YBRb2PuaPDsM8gE0o9ztRnymGaHYdHiy/SuXDInNZQ
iZY2Q16fjX43SV/2hBlPfKjRzaC7t1+7WSWN12IR+lBq2PvIFEpu2Kh9cdjZmC9m
x5o2lryrQU9VKK5LgajZrPra9NGfnwFqYdCddIo7PvY0kFLWj+YHyIImOD4vSvo=
=qvSQ
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig
Merge "First batch of defconfig changes for 4.2" from Nicolas Ferre:
- fixed regulators for sd/mmc
- addition of AT91 to the multi_v7_defconfig
* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: multi_v7_defconfig: Add Atmel SAMA5 family
ARM: at91/defconfig: add CONFIG_REGULATOR_FIXED_VOLTAGE for mmc driver
Conflicts:
arch/arm/configs/multi_v7_defconfig
The original stm32 defconfig file looks for a ./rootfs.cpio file,
but that breaks with
../scripts/gen_initramfs_list.sh: Cannot open './rootfs.cpio'
when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
The original zx defconfig file looks for a ./rootfs.cpio file,
but that breaks with
scripts/gen_initramfs_list.sh: Cannot open 'initramfs.cpio.gz'
when trying to build this kernel. Anybody who relies on the
current behavior should change their build scripts to append
the initramfs manually, as this patch removes that default
in order to help autmatic testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jun Nie <jun.nie@linaro.org>
Add the Atmel sama5d3 and sama5d4 and their peripherals to multi_v7_defconfig.
Note that the console will be ttyAT0 instead of the usual ttyS0.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
As an update of the sd/mmc DT definition needs the fixed voltage regulator, add
it to the at91 defconfigs.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs
CONFIG_BT_HCIUART_LL.
APF6Dev carrier board has a SX8654 I2C touchscreen controller.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds a new config for STM32 MCUs.
STM32F429 Discovery board boots successfully with this config applied.
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add basic defconfig support to zx SOC, including uart, mmc
and other common config
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a set of changes to the Tegra default configuration that enable
various new features (HDMI audio, watchdog) on Toradex Apalis T30.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wg5M
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Merge "ARM: tegra: Default configuration updates for v4.2-rc1" from Thierry Reding:
This is a set of changes to the Tegra default configuration that enable
various new features (HDMI audio, watchdog) on Toradex Apalis T30.
* tag 'tegra-for-4.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update default configuration
This enables the CoreSight blocks found on the Ux500 SoC
into the Ux500 defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Ux500 has a perfectly working PMU so let's put the perf
events into the defconfig. This will activate HW_PERF_EVENTS
by default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable all drivers under CONFIG_ARM_CRYPTO as modules. Enable
CONFIG_KERNEL_MODE_NEON as well so that the modules that either
contain a NEON alternative or consist solely of a NEON (or ARMv8
crypto extensions) accelerated implementation are enabled fully as
well.
Note that the ARMv8 modules will only be built if the detected
toolchain version is recent enough (binutils 2.23 or higher).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only
PHY_RCAR_GEN2 driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add UniPhier, a new citizen in the ARM multi platform.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the digicolor drivers that are already merged as
part of the multi_v7_defconfig file.
[arnd: change rtc and i2c to loadable modules]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GPIO controller of Hisilicon hip04 Soc uses the IP from Sysnopsis,
gpio-dwapb.c can be reused to support this GPIO controller. This patch
adds related configure item in hisi_defconfig.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
RTC PCF8523 is used on some mx6 cubox-i boards.
Let it work by default.
Reported-by: Rick Thomas <rbthomas@cube.rcthomas.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
We need to enable EXTCON_USB_GPIO_USB and not
EXTCON_GPIO_USB.
Fixes: c08a54c0eb ("ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB")
Reported-by: Nishant Menon <nm@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by-by: Nishanth Menon <nm@ti.com
Tested-by: Nishanth Menon <nm@ti.com
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only
PHY_RCAR_GEN2 driver.
Refresh the defconfig using "make savedefconfig" while we're at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new drivers that have come in, or minor config
refreshes due to reorderings in Kconfig files, etc. I.e. mostly minor churn
of various kinds.
We might start folding this branch into something else for upstream merge
since it's so small, but keep it independent in our own tree for the above
reasons.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W1j4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep collecting defconfig updates in a separate branch mostly to
encourage people to handle them separately and avoid conflicts between
different topics.
Most of these are enablement of new drivers that have come in, or
minor config refreshes due to reorderings in Kconfig files, etc. I.e.
mostly minor churn of various kinds.
We might start folding this branch into something else for upstream
merge since it's so small, but keep it independent in our own tree for
the above reasons"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
ARM: multi_v7_defconfig: enable alpine platform
ARM: multi_v7_defconfig: Add gpio-restart driver
ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module
ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads
ARM: multi_v7_defconfig: Enable Tegra ACTMON support
ARM: configs: remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
ARM: exynos_defconfig: Enable HDMI support
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS
ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig
ARM: mvebu: Enable perf support in mvebu_v7_defconfig
ARM: exynos_defconfig: Enable ChromeOS EC chardev driver
ARM: exynos_defconfig: Enable CPU idle
ARM: exynos_defconfig: Enable Marvell WiFi-Ex support
arm: qcom: Update defconfig
arm: qcom: Enable lpass clock driver in defconfig
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
ARM: omap2plus_defconfig: Update bluetooth options
ARM: omap2plus_defconfig: Enable leds-pwm
ARM: omap1_defconfig: drop obsolete Kconfig symbols
...
The changes here belong to two main platforms:
- Atmel At91 is flipping the bit and going multiplatform. This includes some
cleanups and removal of code, and the final flip of config dependencies
- Shmobile has several platforms that are going multiplatform, but this
branch also contains a bunch of cleanups that they weren't able to keep
separate in a good way. THere's also a removal of one of their SoCs and the
corresponding boards (sh7372 and mackerel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Vq4N
-----END PGP SIGNATURE-----
Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform code changes from Olof Johansson:
"The changes here belong to two main platforms:
- Atmel At91 is flipping the bit and going multiplatform. This
includes some cleanups and removal of code, and the final flip of
config dependencies
- Shmobile has several platforms that are going multiplatform, but
this branch also contains a bunch of cleanups that they weren't
able to keep separate in a good way. THere's also a removal of one
of their SoCs and the corresponding boards (sh7372 and mackerel)"
* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
ARM: at91/pm: move the standby functions to pm.c
ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected
ARM: at91: add a Kconfig dependency on multi-platform
ARM: at91: drop AT91_TIMER_HZ
ARM: at91: remove hardware.h
ARM: at91: remove SoC headers
ARM: at91: remove useless mach/cpu.h
ARM: at91: remove unused headers
ARM: at91: switch at91_dt_defconfig to multiplatform
ARM: at91: switch to multiplatform
ARM: shmobile: r8a7778: enable multiplatform target
ARM: shmobile: bockw: add sound to DT
ARM: shmobile: r8a7778: add sound to DT
ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
DT: i2c: add trivial binding for OKI ML86V7667 video decoder
ARM: shmobile: r8a7778: common clock framework CPG driver
ARM: shmobile: bockw dts: set extal clock frequency
ARM: shmobile: bockw dts: Move Ethernet node to BSC
ARM: shmobile: r8a73a4: Remove legacy code
...
We've got a fairly large cleanup branch this time. The bulk of this is removal
of non-DT platforms of several flavors:
- Atmel at91 platforms go full-DT, with removal of remaining board-file based
support
- OMAP removes legacy board files for three more platforms
- Removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom
- Freescale i.MX25 also removes non-DT platform support
Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BV8A
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"We've got a fairly large cleanup branch this time. The bulk of this
is removal of non-DT platforms of several flavors:
- Atmel at91 platforms go full-DT, with removal of remaining
board-file based support
- OMAP removes legacy board files for three more platforms
- removal of non-DT mach-msm, newer Qualcomm platforms now live in
mach-qcom
- Freescale i.MX25 also removes non-DT platform support"
Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
mmc: Remove msm_sdcc driver
gpio: Remove gpio-msm-v1 driver
ARM: Remove mach-msm and associated ARM architecture code
ARM: shmobile: cpuidle: Remove the pointless default driver
ARM: davinci: dm646x: Add interrupt resource for McASPs
ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
ARM: davinci: dm646x: Clean up the McASP DMA resources
ARM: davinci: devices-da8xx: Add support for McASP2 on da830
ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
ARM: OMAP2+: Remove legacy support for omap3 TouchBook
ARM: OMAP3: Remove legacy support for devkit8000
ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
ARM: shmobile: Consolidate the pm code for R-Car Gen2
ARM: shmobile: r8a7791: Correct SYSCIER value
ARM: shmobile: r8a7790: Correct SYSCIER value
ARM: at91: remove old setup
ARM: at91: sama5d4: remove useless map_io
ARM: at91: sama5 use SoC detection infrastructure
...
The generic PCI driver is required for SATA device probe on Alpine platform,
so it cannot be modular.
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The RISC OS personality seems to be unused and untested for a long time.
It is doubtful whether this personality worked ever as expected.
Let's rip it out.
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
- update exynos-defconfig
: enable HDMI, CPUidle, ChromeOS EC chardev driver
and thermal emulation, Marvell WiFi-Ex, CPUfreq,
and support for NFS rootfs
: remove EXYNOS_THERMAL_CORE define
and disable IOMMU support until support it
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=XAXR
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig
Merge "Samsung defconfig updates for v4.1" from Kukjin Kim:
- update exynos-defconfig
: enable HDMI, CPUidle, ChromeOS EC chardev driver
and thermal emulation, Marvell WiFi-Ex, CPUfreq,
and support for NFS rootfs
: remove EXYNOS_THERMAL_CORE define
and disable IOMMU support until support it
* tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable HDMI support
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS
ARM: exynos_defconfig: Enable ChromeOS EC chardev driver
ARM: exynos_defconfig: Enable CPU idle
ARM: exynos_defconfig: Enable Marvell WiFi-Ex support
ARM: exynos_defconfig: Disable IOMMU support
ARM: exynos_defconfig: Enable support for cpufreq on Exynos SoCs
ARM: exynos_defconfig: Enable thermal emulation for Exynos TMU
ARM: exynos_defconfig: Remove CONFIG_EXYNOS_THERMAL_CORE define
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable VFAT, Bluetooth and PCA953X GPIO expander support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVGT+aAAoJEFBXWFqHsHzOmX4H/2SPkq4RO1aWtoydWiBBNdjl
eXwNH3eNU6Bt/pw+1yP2e2eb5fmKZtAXyWHl6ymQT4juZF6FVeddAWoVQrWZZTQb
i1sb5g2FoO7b+zGXftz2Rq29m5ioFT6aHdkS1np1ygy2HUwG4akzGUDB1bPZgFf8
q28DcmLNqwzqDpeKKBASkNo1yals+uiOl/u5uIOxJ21eP6Uqf8QW7vVSxg8zfawg
CKok/R4lwtwAclDeFZ9Kes937u8Czz+q3PbNHwjJfgdt0MtbQgu0GviYfTjhNArK
pATuDhNuJ4FnUKAidDwXvu5f7UZwmMamlinOifFoxRMtbN4/nGDwNSMfmWCoyQE=
=7uPF
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "ARM: imx: defconfig updates for 4.1" from Shawn Guo:
The i.MX defconfig updates for 4.1:
- Enable VFAT, Bluetooth and PCA953X GPIO expander support
* tag 'imx-defconfig-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable Bluetooth support
ARM: imx_v6_v7_defconfig: Add CONFIG_GPIO_PCA953X
ARM: imx_v4_v5_defconfig: Add VFAT support
ARM: mxs_defconfig: Add VFAT support
Signed-off-by: Olof Johansson <olof@lixom.net>
- Convert i.MX25 to be a DT only platform and remove the code that is
only used by non-DT support
- A couple trivial cleanup on iomux-v3 code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVGOsvAAoJEFBXWFqHsHzO8tAH/RN7+it0BDHhznppwonYx3OI
hTdkgvZ9WwMg9X5MelEgyvrtgSiPB9SvpkUiW7eV8/FK7ZhKbD86YuWHiQ7AOTYg
hy87sbrJaJtNcsLpLzvDUZWpLa0zSLW0GGuwevNuxC1M8vljwZI5i0ONEGCSf7Bf
N1DawR39AHi9Z997NIfnUwNV3VSDV/YZd6znxZh6UocFbWvRKpRZWeexdHPQPlXE
Y/HaVbPHDpKxH1nhlAvmmsum5/uTGdVGRXAtTPRgJJeJiXDquwKVKIypiR503mE/
04v837w1R/xwmp7cOTRUHnjphTsGjqTKcMc8FDsS8FoFzWa34kVicUDL2vZEykA=
=0TsA
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/cleanup
Merge "ARM: imx: cleanup for 4.1" from Shawn Guo:
The i.MX cleanup for v4.1:
- Convert i.MX25 to be a DT only platform and remove the code that is
only used by non-DT support
- A couple trivial cleanup on iomux-v3 code
* tag 'imx-cleanup-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: Remove CONFIG_MACH_MX25_3DS
ARM: mx25: Remove imxdi_rtc platform code
ARM: mx25: Remove "mx25.h" header file
ARM: mx25: Remove static memory mapping
ARM: mx25: Retrieve IIM base from dt
ARM: mx25: Remove mx25_clocks_init()
ARM: mx25: Remove platform code support files
ARM: mx25: Convert to a dt-only platform
ARM: imx25: Remove eukrea mx25 board files
ARM: mx25: Remove mach-mx25_3ds board file
ARM: imx: Fix trivial typo in comments
ARM: imx: Kconfig: Fix grammar in help text
ARM: imx/iomux-v3: allow pad_list to be const
Signed-off-by: Olof Johansson <olof@lixom.net>
Needed in several Chromebook models such as the Tegra-based ones.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Needed in several Chromebook models such as the Tegra-based ones.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This brings the DevFreq framework in and builds the ACTMON driver that
on Tegra124 will scale the external memory clock based on current load.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Increase MMC_BLOCK_MINORS to 32 since qcom platforms have more than
16 partitions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=zxOh
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/defconfig
Merge "qcom defconfig changes for 4.1-1" from Kumar Gala:
Qualcomm ARM Based defconfig Updates for v4.1-1
* Increase MMC_BLOCK_MINORS to 32 since qcom platforms have more than
16 partitions
* tag 'qcom-defconfig-for-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
* Removal of mach-msm and associated drivers cleanups that have been
ack'd by associated maintainers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=rBCl
-----END PGP SIGNATURE-----
Merge tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/cleanup
Merge "qcom cleanup changes for 4.1" from Kumar Gala:
General cleanups for MSM/QCOM for 4.1
* Removal of mach-msm and associated drivers cleanups that have been
ack'd by associated maintainers
* tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
mmc: Remove msm_sdcc driver
gpio: Remove gpio-msm-v1 driver
ARM: Remove mach-msm and associated ARM architecture code
+ Linux 4.0-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
Nothing really standing out here, just a few options to enable in the defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=99ES
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.1' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.1" from Maxime Ripard:
Nothing really standing out here, just a few options to enable in the defconfigs
* tag 'sunxi-defconfig-for-4.1' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi_defconfig: increase the number of maximum number of CPUs to 8
ARM: multi_v7_defconfig: Enable CONFIG_PHY_SUN9I_USB
ARM: sunxi_defconfig: Enable CONFIG_PHY_SUN9I_USB
Signed-off-by: Olof Johansson <olof@lixom.net>
- add perf support in mvebu_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlUL6CAACgkQCwYYjhRyO9XHCACgiDr25bMPW6sxghz6LNXP9fbv
6z4AnjYvd/kefOzNeAJFrVLJyt2I24lV
=TxRJ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.1-2' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "ARM: mvebu: defconfig changes for v4.1 (round 2)" from Gregory Clement:
mvebu defconfig changes for v4.1 (part #2)
- add perf support in mvebu_v7_defconfig
* tag 'mvebu-defconfig-4.1-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable perf support in mvebu_v7_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
loadable modules.
Note that I'll do patches for armv7_defconfig for these at some
point too once we're happy with omap2plus_defconfig to avoid
extra churn on the defconfig files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=59fx
-----END PGP SIGNATURE-----
Merge tag 'v4.1-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig changes for v4.1" from Tony Lindgren:
Few omap2plus_defconfig updates to add commonly used drivers as
loadable modules.
Note that I'll do patches for armv7_defconfig for these at some
point too once we're happy with omap2plus_defconfig to avoid
extra churn on the defconfig files.
* tag 'v4.1-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
ARM: omap2plus_defconfig: Update bluetooth options
ARM: omap2plus_defconfig: Enable leds-pwm
ARM: omap1_defconfig: drop obsolete Kconfig symbols
arm: config: omap2plus_defconfig: switch over to LZMA compression
ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB
Signed-off-by: Olof Johansson <olof@lixom.net>
- reworked arch/arm/mach-at91/Kconfig and arch/arm/Kconfig to switch to
multi-platform
- updated at91_dt_defconfig
- continue the cleanup of unneeded files and code chunks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJVCv+EAAoJEAf03oE53VmQRgQIALCEppiZCt7xzH8bbGToyiSh
A1lWqDFm5kvkUW9igaks1XenxcDmKg7TwLfjolyqny20CL6/rt1oap07Yt7eAIW1
6KdCKk7RML0vduX3F/wl+ZQe6ykob0vWzaeeUNI1RgBkD7hsZCb60Re1fj44pR99
dgj08EAme1yBvvFN2iA7IWUXJMPIuQ+uFzFUMiPVahgR49AbTG/TLfGHWM8i/H15
HF/ETeShV4k02lqipm4E8te0VAiDjYcrpc12NbQ0M1jFgD+1V+tY0IvrrtTcxHEe
53CCwN09nKJTRBZrPyCdKK7r4xrpPb64ZydBWXOHkVizS24jG1fc4aXG74qBooI=
=uyvg
-----END PGP SIGNATURE-----
Merge tag 'at91-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/multiplatform
Merge "at91: multiplatform for 4.1 #1" from Nicolas Ferre:
This is the multi-platform support for AT91:
- reworked arch/arm/mach-at91/Kconfig and arch/arm/Kconfig to switch to
multi-platform
- updated at91_dt_defconfig
- continue the cleanup of unneeded files and code chunks
* tag 'at91-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (61 commits)
ARM: at91: drop AT91_TIMER_HZ
ARM: at91: remove hardware.h
ARM: at91: remove SoC headers
ARM: at91: remove useless mach/cpu.h
ARM: at91: remove unused headers
ARM: at91: switch at91_dt_defconfig to multiplatform
ARM: at91: switch to multiplatform
ARM: at91: remove useless include
clocksource: atmel-st: remove mach/hardware dependency
clocksource: atmel-st: use syscon/regmap
ARM: at91: time: move the system timer driver to drivers/clocksource
ARM: at91: properly initialize timer
ARM: at91: at91rm9200: remove deprecated arm_pm_restart
watchdog: at91rm9200: implement restart handler
watchdog: at91rm9200: use the system timer syscon
mfd: syscon: Add atmel system timer registers definition
ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
ARM: at91: remove old setup
ARM: at91: sama5d4: remove useless map_io
ARM: at91: sama5 use SoC detection infrastructure
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri DMAEngine is no longer needed.
Remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Olof Johansson <olof@lixom.net>
Following the introduction of the Marvell Armada 39x support, let's
enable this support by default in multi_v7_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <arm@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.
[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Many Exynos boards have an HDMI port so enable Exynos DRM HDMI
support.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch enables the options to mount a rootfs over NFS and also
support for automatic configuration of IP addresses during boot as
needed by NFS.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
There are currently more than 16 partitions on the eMMC of all recent
Qualcomm devices. Increase the number of minors per block device to
detect all available partitions.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Now that Armada 375/38x have support for the PMU, this commit enables perf
events in the defconfig.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Exynos Chromebooks have an Embedded Controller known as the ChromeOS EC
Enable the driver that provides an interface to access from user-space.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos 4210 (coupled), Exynos 4x12 and Exynos 5250.
Enable it in default configuration to reduce energy consumption.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a MMC/SDIO
Marvell WiFi-Ex chip. This patch enables wireless support and the
mwifiex driver.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
After removing ARCH_REQUIRE_GPIOLIB we need to select
CONFIG_GPIOLIB to keep building the pinctrl drivers. Make the
defconfig smaller too by running savedefconfig.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Enable the LPASS clock controller driver so that audio drivers
can enable, disable, and set rates on their clocks.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Enable 8960 driver too]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
scripts/checkkconfigsymbols.py indicates that omap1_defconfig
references the following obsolete Kconfig symbols:
CONFIG_BT_L2CAP
CONFIG_BT_SCO
CONFIG_DEBUG_ERRORS
CONFIG_EXPERIMENTAL
CONFIG_FB_OMAP_BOOTLOADER_INIT
CONFIG_LEDS_CPU
CONFIG_MACH_OMAP_HTCWIZARD
CONFIG_MTD_CHAR
CONFIG_MTD_DEBUG
CONFIG_MTD_DEBUG_VERBOSE
CONFIG_MTD_PARTITIONS
CONFIG_NET_ETHERNET
CONFIG_RCU_CPU_STALL_DETECTOR
CONFIG_SCSI_MULTI_LUN
CONFIG_USB_DEVICE_CLASS
CONFIG_VIDEO_OUTPUT_CONTROL
Drop them from omap1_defconfig.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Stefan Hengelein <stefan.hengelein@fau.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
LZMA compression makes about 33% smaller zImage
with just a slight extra decompression time.
Before this patch, zImage built with o2+_dc
is 4.5MiB and after it's about 3.3MiB.
Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This driver is needed for USB cable type detection on dra7-evm,
dra72-evm and am57xx-beagle-x15.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJU9uKaAAoJEAf03oE53VmQrT4IAID5RZZLycH65MfI2SWs5jHJ
riXpp2ByX2YMZhBV7Y+jSJcdty0zdZFXAm3cME8YtHSHFNW87y3U90BhL1JTwFh8
Rlk45xxauRmiH5R+0haBIavt+ZFHB8QOgmAE+xa4Vc/qBiry6HSgWVldk3yiai5j
Mnq/+UpeL7mSlcn9kFkbVVOkDiP2tRoITU0z780tBgywbUQEluNZan4MfjSaknzP
GEwmN74Z6QPUxhqc1Z1ACU84ozYcLYaiMksNXrTch0+dLz91MIRl6Eqb53XhJEK3
P8ysCj16UBgX2JuuYWBGkxrZ1Brl0Lj5075JrM+He0T/XRsLTChb+9rQ14QrKno=
=YpBm
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' into at91-4.1-multiplatform
First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
We do not have CONFIG_MACH_MX25_3DS platform anymore, so update the defconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It is used for max7310 gpio expandor which is used at imx6qdl
sabreauto board.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJU9uKaAAoJEAf03oE53VmQrT4IAID5RZZLycH65MfI2SWs5jHJ
riXpp2ByX2YMZhBV7Y+jSJcdty0zdZFXAm3cME8YtHSHFNW87y3U90BhL1JTwFh8
Rlk45xxauRmiH5R+0haBIavt+ZFHB8QOgmAE+xa4Vc/qBiry6HSgWVldk3yiai5j
Mnq/+UpeL7mSlcn9kFkbVVOkDiP2tRoITU0z780tBgywbUQEluNZan4MfjSaknzP
GEwmN74Z6QPUxhqc1Z1ACU84ozYcLYaiMksNXrTch0+dLz91MIRl6Eqb53XhJEK3
P8ysCj16UBgX2JuuYWBGkxrZ1Brl0Lj5075JrM+He0T/XRsLTChb+9rQ14QrKno=
=YpBm
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' into at91-4.1-cleanup
First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
- add the new Armada 39x SoC in mvebu_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlT9R2MACgkQCwYYjhRyO9UOLQCfeQuNL/nHDlc+0GanS9pBAyil
sBMAoKGEjhdA1NTfnykWexg3Ml4BwVX4
=VaQQ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.1' of git://git.infradead.org/linux-mvebu into next/defconfig
Pull "mvebu defconfig changes for v4.1 (part #1)" from Gregory CLEMENT:
- add the new Armada 39x SoC in mvebu_v7_defconfig
* tag 'mvebu-defconfig-4.1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig
Commit 7ef077a8ad ("usb: isp1760: Move driver from drivers/usb/host/
to drivers/usb/isp1760/") moved the isp1760 driver and changed the
Kconfig option. This makes CONFIG_USB_ISP1760_HCD not selectable
directly anymore. This results in driver being not compiled in when
using vexpress_defconfig and the USB is non-functional.
This patch updates the CONFIG_USB_ISP1760_HCD to CONFIG_USB_ISP1760 to
get back USB functional on vexpress platforms.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
with the bigger changes being for the dra7 clocks and hwmod data:
- Fix wl12xx for dm3730-evm
- Fix omap4 prm save and clea
- Fix hwmod clkdm use count
- Fix hwmod data for pcie on dra7
- Fix lockdep for hwmod
- Fix USB on most omap3 boars by enabling it in the defconfig
- Fix the bypass clock source for omap5 and dra7
- Fix the ehrpwm clock for am33xx and am43xx
- Enable AES and SHAM for BeagleBone white
- Use rmii clock for am335x-lxm
- Fix polling intervals for omap5 thermal zones
- Fix slewctrl for am33xx and am43xx
- Fix dra7-evm dcan pinctrl
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C0ct
-----END PGP SIGNATURE-----
Merge tag 'fixes-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "omap fixes against v4.0-rc2" from Tony Lindgren:
Fixes for various omap variants, mostly minor fixes for various SoCs
with the bigger changes being for the dra7 clocks and hwmod data:
- Fix wl12xx for dm3730-evm
- Fix omap4 prm save and clea
- Fix hwmod clkdm use count
- Fix hwmod data for pcie on dra7
- Fix lockdep for hwmod
- Fix USB on most omap3 boars by enabling it in the defconfig
- Fix the bypass clock source for omap5 and dra7
- Fix the ehrpwm clock for am33xx and am43xx
- Enable AES and SHAM for BeagleBone white
- Use rmii clock for am335x-lxm
- Fix polling intervals for omap5 thermal zones
- Fix slewctrl for am33xx and am43xx
- Fix dra7-evm dcan pinctrl
* tag 'fixes-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot
ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig
ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines
ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl
ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding
ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding
ARM: dts: OMAP5: fix polling intervals for thermal zones
ARM: dts: am335x-lxm: Use rmii-clock-ext
ARM: dts: am335x-bone-common: enable aes and sham
ARM: dts: am43xx-clocks: Fix ehrpwm tbclk data on am43xx
ARM: dts: am33xx-clocks: Fix ehrpwm tbclk data on am33xx
ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others
ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others
ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqen
ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting
ARM: DRA7: hwmod_data: Fix hwmod data for pcie
ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod
As there is no more mx25 board files, we can turn mx25 into a dt-only platform.
Rename imx25-dt.c to mach-imx25.c to be consistent with the other i.MX SoCs.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Enable TWL4030_USB which is used at least on Nokia N900/N950/N9 (OMAP3)
and BeagleBoard.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The HiSilicon HiP04 has 16 CPUs. I propose we increase the maximum number of CPUs to 16 to avoid the following warning identified during automated boot testing [1].
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x118/0x1e8()
DT /cpu 9 nodes greater than max cores 8, capping them
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1
Hardware name: Hisilicon HiP04 (Flattened Device Tree)
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x78/0x94)
[] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0)
[] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
[] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x118/0x1e8)
[] (arm_dt_init_cpu_maps) from [] (setup_arch+0x638/0x9a0)
[] (setup_arch) from [] (start_kernel+0x8c/0x3b4)
[] (start_kernel) from [<10208074>] (0x10208074)
---[ end trace cb88537fdc8fa200 ]---
[1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-multi_v7_defconfig/lab-tbaker/boot-hip04-d01.html
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1].
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0()
DT /cpu 5 nodes greater than max cores 4, capping them
CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1
Hardware name: Allwinner sun9i Family
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x74/0x90)
[] (dump_stack) from [] (warn_slowpath_common+0x70/0xac)
[] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
[] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0)
[] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4)
[] (setup_arch) from [] (start_kernel+0x88/0x3ac)
[] (start_kernel) from [<20008074>] (0x20008074)
---[ end trace cb88537fdc8fa200 ]---
[1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Remove the sh7372 SoC and its mackerel board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Lpw8
-----END PGP SIGNATURE-----
Merge tag 'renesas-sh7372-soc-removal-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/multiplatform
Pull "Renesas ARM Based SoC sh7372 SoC Removal Updates for v4.1" from Simon Horman:
* Remove the sh7372 SoC and its mackerel board
* tag 'renesas-sh7372-soc-removal-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
Documentation: Remove ZBOOT MMC/SDHI utility and docs
ARM: shmobile: sh7372 dtsi: Remove Legacy DTSI file
ARM: shmobile: sh7372: Remove DT binding documentation
ARM: shmobile: sh7372: Remove Legacy C SoC code
ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support
ARM: shmobile: mackerel: Remove from MAINTAINERS
ARM: shmobile: mackerel: Remove defconfig
ARM: shmobile: mackerel: Remove mach-type entry
ARM: shmobile: mackerel: Remove DT binding documentation
ARM: shmobile: mackerel dts: Remove Legacy DTS file
ARM: shmobile: mackerel: Remove Legacy C board code
ARM: shmobile: mackerel: Remove ZBOOT code
[arnd: The sh7372 platform is rather dated and is believed to
have no active users on modern kernels. It stands in the way
of converting all of mach-shmobile to be multiplatform capable,
as adding pinctrl and common-clock support for it would be more
work than it's worth. As always, should any legitimate upstream
users show up in the future, we will revert this removal]
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJU9uKaAAoJEAf03oE53VmQrT4IAID5RZZLycH65MfI2SWs5jHJ
riXpp2ByX2YMZhBV7Y+jSJcdty0zdZFXAm3cME8YtHSHFNW87y3U90BhL1JTwFh8
Rlk45xxauRmiH5R+0haBIavt+ZFHB8QOgmAE+xa4Vc/qBiry6HSgWVldk3yiai5j
Mnq/+UpeL7mSlcn9kFkbVVOkDiP2tRoITU0z780tBgywbUQEluNZan4MfjSaknzP
GEwmN74Z6QPUxhqc1Z1ACU84ozYcLYaiMksNXrTch0+dLz91MIRl6Eqb53XhJEK3
P8ysCj16UBgX2JuuYWBGkxrZ1Brl0Lj5075JrM+He0T/XRsLTChb+9rQ14QrKno=
=YpBm
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Merge "First fixes batch for AT91 on 4.0" from Nicolas Ferre:
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/dt: keep watchdog running in idle mode
dts: Documentation: AT91 Watchdog, explain what atmel,idle-halt property really do
ARM: at91/defconfig: add at91rm9200 ethernet support
ARM: at91/defconfig: remove CONFIG_SYSFS_DEPRECATED
ARM: at91/dt: at91sam9260: fix usart pinctrl
ARM: at91/dt: sama5d4: add missing alias for i2c0
ARM: at91/dt: at91sam9263: Fixup sram1 device tree node
ARM: at91: pm: fix SRAM allocation
ARM: at91: pm: fix at91rm9200 standby
pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
Following the introduction of the Marvell Armada 39x support, let's
enabled it by default in mvebu_v7_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet
support for the at91rm9200.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Recent distributions and userspace tools after 2009/2010 depend on
the existence of /sys/class/block/, and will not work with this option enabled.
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
