The inet86dz tablet has a gsl1680 touchscreen,
add a dt node describing it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The gt90h tablet has a gsl3675 touchscreen, add a dt node describing it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
And here's another nitpick ;-)
Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Fixes: b118c6a6ff ("ARM: dts: Add power button support for igepv5")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
It should be GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH as
pointed out by Pau Pajuel <ppajuel@gmail.com>.
Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Fixes: b118c6a6ff ("ARM: dts: Add power button support for igepv5")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add blue-and-red-wiring -property to lcdc node. The am335x-evmsk has
blue and red wires crossed to get 24-bit RGB (and 16-bit BGR)
support. After this patch am335x-evmsk supports BGR565, RGB888, and
XRGB8888 color formats. See details in
Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Whitespace cleanup of lcdc related nodes. Do all indentation and
alignment with tabs instead of spaces.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add blue-and-red-wiring -property to lcdc node. The am335x-evm has
blue and red wires crossed to get 24-bit RGB (and 16-bit BGR)
support. After this patch am335x-evm supports BGR565, RGB888, and
XRGB8888 color formats. See details in
Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace in DT sources hard-coded values for pinctrl configuration like pull
up/down, drive strength and function. This makes the DTS easier to read,
especially that some drive strengths values are quite non-obvious.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NN8A
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski:
Replace in DT sources hard-coded values for pinctrl configuration like pull
up/down, drive strength and function. This makes the DTS easier to read,
especially that some drive strengths values are quite non-obvious.
* tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s3c64xx: Use macros for pinctrl configuration
ARM: dts: s3c2416: Use macros for pinctrl configuration
ARM: dts: s5pv210: Use macros for pinctrl configuration
ARM: dts: s3c64xx: Use common macros for pinctrl configuration
ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415
ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210
ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800
ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410
ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260
ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250
ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415
ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12
ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210
ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250
ARM: dts: exynos: Use common macros for pinctrl configuration
pinctrl: dt-bindings: samsung: Update documentation with new macros
pinctrl: dt-bindings: samsung: Add header with values used for configuration
1. Enable HDMI on Arndale Octa board.
2. Update list of clocks for FIMC-IS block on Exynos4x12.
3. Remove skeleton.dtsi thus fixing DT compiler warning:
"Node /memory has a reg or ranges property, but no unit name"
This is a tree-wide effort by various people. Javier Martinez Canillas did
it for Exynos and S5PV210.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gG35
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DeviceTree update for v4.9, second round" from Krzysztof Kozłowski:
1. Enable HDMI on Arndale Octa board.
2. Update list of clocks for FIMC-IS block on Exynos4x12.
3. Remove skeleton.dtsi thus fixing DT compiler warning:
"Node /memory has a reg or ranges property, but no unit name"
This is a tree-wide effort by various people. Javier Martinez Canillas did
it for Exynos and S5PV210.
* tag 'samsung-dt-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5p: Add missing unit name to memory nodes for S5PV210 boards
ARM: dts: s5p: Remove skeleton.dtsi inclusion for S5PV210
ARM: dts: exynos: Add missing unit name to memory nodes in Exynos5 DTS
ARM: dts: exynos: Add missing unit name to memory nodes in Exynos4 DTS
ARM: dts: exynos: Add missing unit name to memory nodes in Exynos3 DTS
ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos5
ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos4
ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos3
ARM: dts: exynos: Add missing memory node for Exynos5440 boards
ARM: dts: exynos: Add all required FIMC-IS clocks to exynos4x12
ARM: dts: exynos: Enable HDMI for Arndale Octa board
is mostly usability and non-critical fixes except for the addition of
beagleboard-x15 rev B1 support:
- Fix omap4 pandaboard SDIO WLAN latencies in idle mode by enabling wakeirq
- Usability fixes for WLAN, USB, LEDs and power button on omap5 boards
- Remove am57xx beagleboard-x15 pinmux configuration as the processor requires
that it's done in IO isolation in bootloader except for MMC and DCAN
- Add support for beagleboard-x15 rev B1 by moving most of the
configuration to am57xx-beagle-x15-common.dtsi
- Enable support for more than 2GB of memory for omap5 with LPAE with
#address-cells
- Fix omap3-gta04 backlight PWM frequency until the PWM driver
- Revert am335x dts changes related to cpufreq as the driver changes
still have not merged and the dts changes broke cpufreq
-----BEGIN PGP SIGNATURE-----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=HYYB
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "omap dts updates for v4.9 merge window, part 2" from Tony Lindgren:
Part two of device tree changes for omaps for v4.9 merge window. This
is mostly usability and non-critical fixes except for the addition of
beagleboard-x15 rev B1 support:
- Fix omap4 pandaboard SDIO WLAN latencies in idle mode by enabling wakeirq
- Usability fixes for WLAN, USB, LEDs and power button on omap5 boards
- Remove am57xx beagleboard-x15 pinmux configuration as the processor requires
that it's done in IO isolation in bootloader except for MMC and DCAN
- Add support for beagleboard-x15 rev B1 by moving most of the
configuration to am57xx-beagle-x15-common.dtsi
- Enable support for more than 2GB of memory for omap5 with LPAE with
#address-cells
- Fix omap3-gta04 backlight PWM frequency until the PWM driver
- Revert am335x dts changes related to cpufreq as the driver changes
still have not merged and the dts changes broke cpufreq
* tag 'omap-for-v4.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "ARM: dts: dra7: Move to operating-points-v2 table"
Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver"
Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu"
ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
ARM: dts: Add support for more than 2GB of memory for omap5
ARM: dts: am57xx-beagle-x15: Add support for rev B1
ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869
ARM: dts: Fix LEDs for igepv5
ARM: dts: Add power button support for igepv5
ARM: dts: Configure omap5 OTG ID pin
ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
ARM: dts: Configure panda SDIO WLAN wakeirq
This serie allows to increase video resolutions and make audio
adjustment during a video playback for STiH407 family socs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Fw1N
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt
Pull "STi clock improvement for video playback" from Patrice Chotard:
This serie allows to increase video resolutions and make audio
adjustment during a video playback for STiH407 family socs.
* tag 'sti-dt-for-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH410: clock configuration to address 720p and 1080p
ARM: dts: STi: STiH407: clock configuration to address 720p and 1080p
ARM: dts: STiH418: Enable synchronous clock mode for video clocks
ARM: dts: STiH410: Enable synchronous clock mode for video clocks
ARM: dts: STiH407: Enable synchronous clock mode for video clocks
ARM: dts: STiH418: Enable clock propagation for audio clocks
ARM: dts: STiH410: Enable clock propagation for audio clocks
ARM: dts: STiH407: Enable clock propagation for audio clocks
ARM: dts: STiH4xx: Simplify clock binding of STiH4xx platforms
Update gpio-cells and gpio specifier for STiH415/416
Add PWM capture support for STiH416 and STiH407 family
Add USB3 support for B2260
Add HVA support for STiH410
Add clk_ignore_unused in bootargs of B2260
Add Flexible Direct Memory Access (FDMA) support for STiH407 family
Add internal audio codec IP spport for STiH407 family
Add uniperif player/reader IP blocks for STiH407 family
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJX2T7MAAoJEMrHeC97M/+m6/8P/0mKaMV/p+9P942A3fJEwJsR
STpES7YBOOvwYE+xhTErz/zjQhaw92Kq/5DFBIcjBRDq7f1G6WTbiDumV/1qaPva
HOJeaa7aZOYjD0JbFqXZr9t68U/RmRDd2v16EUnhE3WSKe3Vw+vNrLw9oPDlqOKD
gJ6USjc5C9OTiJ1CMtnDpooBbc/fPNQ8E9VIDD7cCDRNkzt/mu+ceLhgjL4v45ag
GNPpTALTjMSMlmxy+um+BsAIuAKFNiPMrvq3fwlgKygnrnqwcYloD2Aamo9Rb4F8
X9yTAlC1X6T1PPsQF+DrU+q2fBF0kyRLenXZAeQNM/N1gR/SmA3P8HZbLYOOhFd0
HASOPFeZiBwbHGnq4TXCpBganw0tEdap9K2YIulXqKVN51Oc3KUaHgxVS+CJoSVv
1DjEuwCC3/+7qoiMeK52hZ1k8HgO7+T40Afdq0bE64lE2w/aOvTSe+Ckg1PAGEgm
/loE+ri79T3S6zXd+guPPZ8xoGsKmNILAfBBCG2D1MNQKEm7nT9Fwc+uvXh962XI
eAIwZe6OrbENnD4FAou+nSsmzSkPMnPxYYKg5fq3K7txRrQ0/KbIBHkJY+1Jkv1t
eUwRSfRYU58ln2hUroKeX5+J0Iu0EOhSrKmDiCD5f3e/u9qyb6rVX6MLjdxXj0cv
3h85baoQfZGahEmpg6rE
=zoto
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt
Pull "STi dts update" from Patrice Chotard:
Update gpio-cells and gpio specifier for STiH415/416
Add PWM capture support for STiH416 and STiH407 family
Add USB3 support for B2260
Add HVA support for STiH410
Add clk_ignore_unused in bootargs of B2260
Add Flexible Direct Memory Access (FDMA) support for STiH407 family
Add internal audio codec IP spport for STiH407 family
Add uniperif player/reader IP blocks for STiH407 family
* tag 'sti-dt-for-v4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: (22 commits)
ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card
ARM: STi: DT: STiH407: Add uniperif reader dt nodes
ARM: STi: DT: STiH407: Add uniperif player dt nodes
ARM: STi: DT: STiH407: Add sti-sasg-codec dt node
ARM: DT: STiH407: Add spdif_out pinctrl config
ARM: DT: STiH407: Add i2s_in pinctrl configuration
ARM: DT: STiH407: Add i2s_out pinctrl configuration
ARM: STi: DT: STiH407: Add FDMA driver dt nodes.
ARM: dts: STiH410: Add hva dt nodes
ARM: dts: STiH410-b2260: add clk_ignore_unused in bootargs
ARM: dts: STiH410-b2260: add USB3 node
ARM: dts: STiH416: Define the number of PWM Capture channels
ARM: dts: STiH416: Define PWM Capture clock
ARM: dts: STiH416: Declare PWM Capture data lines via Pinctrl
ARM: dts: STiH416: Supply PWM Capture IRQs
ARM: dts: STiH407: Declare PWM Capture data lines via Pinctrl
ARM: dts: STiH407: Supply PWM Capture IRQ
ARM: dts: STiH416-b2020e: update gpio specifier
ARM: dts: STiH41x-b2000: update gpio specifier
ARM: dts: STiHxxx-b2120: update gpio specifier
...
Here are a couple of bugfixes for v4.8-rc. Most of them have
actually been around for a while this time but for some reason
didn't get applied early on. The shmobile regulator fix is the
only one that isn't completely obvious.
device tree changes:
- archtimer interrupts must be level triggered (multiple platforms)
- fix for USB and MMC clocks on STiH410
- fix split DT repository in case of raspberry-pi 3
- A new use of skeleton.dtsi on arm64 has crept in after that
was removed.
defconfig updates:
- xilinx vdma has a new Kconfig symbol name
- keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1
code fixes:
- fix regulator quirk on shmobile
- suspend-to-ram regression on EXYNOS
maintainer updates:
- Javier Martinez Canillas is now a reviewer for Samsung EXYNOS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tYAb
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bugfixes for v4.8-rc.
Most of them have actually been around for a while this time but for
some reason didn't get applied early on. The shmobile regulator fix
is the only one that isn't completely obvious.
Device tree changes:
- archtimer interrupts must be level triggered (multiple platforms)
- fix for USB and MMC clocks on STiH410
- fix split DT repository in case of raspberry-pi 3
- a new use of skeleton.dtsi on arm64 has crept in after that was
removed.
defconfig updates:
- xilinx vdma has a new Kconfig symbol name
- keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1
Code fixes:
- fix regulator quirk on shmobile
- suspend-to-ram regression on EXYNOS
Maintainer updates:
- Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: keystone: defconfig: Fix USB configuration
arm64: dts: Fix broken architected timer interrupt trigger
ARM: multi_v7_defconfig: update XILINX_VDMA
ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
ARM: shmobile: fix regulator quirk for Gen2
ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
MAINTAINERS: Add myself as reviewer for Samsung Exynos support
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace duplicated macros in each DTSI file with a common macro coming
from header. Include the header in each pinctrl DTSI so further changes
could use it.
Although PIN_FUNC_SPC_2 does not bring much information about the
function itself, it still is more descriptive then hard-coded
number <2>.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl drive strength register on exynos4415 is 2-bit wide for each
pin. The pins for SD2 were configured with value of 4. The driver does
not validate the value so this overflow effectively set a bit 1 in
adjacent pins thus configuring them to drive strength 2x.
The author's intention was probably to set drive strength of 4x.
All other SD pins are configured with drive strength of 4x. Fix these
with same pattern.
Fixes: 9246e7ff24 ("ARM: dts: Add dts files for exynos4415 SoC")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl pull up/down register on exynos4210 is 2-bit wide for each
pin and it accepts only values of 0, 1 and 3. The pins sd4-bus-width8
were configured with value of 4. The driver does not validate the value
so this overflow effectively set a bit 1 in adjacent pins thus
configuring them to pull down.
The author's intention was probably to set drive strength of 4x. All
other bus-widths pins are configured with pull up and drive strength of
4x. Fix this one with same pattern.
Fixes: 87711d8c7c ("ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Usage of DTS macros instead of hard-coded numbers makes code easier to
read. One does not have to remember which value means pull-up/down or
specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace duplicated macros in each DTSI file with a common macro coming
from header. Include the header in each pinctrl DTSI so further changes
could use it.
Although PIN_FUNC_SPC_2 does not bring much information about the
function itself, it still is more descriptive then hard-coded
number <2>.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
It is necessary to properly configure these clocks in order
to address 720p and 1080p HDMI resolution.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
It is necessary to properly configure these clocks in order
to address 720p and 1080p HDMI resolution.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch enables the synchronous clock mode for video clocks
on STiH418 board.
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch enables the synchronous clock mode for video clocks
on STiH410 board.
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch enables the synchronous clock mode for video clocks
on STiH407 board.
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch is used in the clock driver to apply a clock propagation
flag on the audio clocks of STiH418
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch is used in the clock driver to apply a clock propagation
flag on the audio clocks of STiH410
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch is used in the clock driver to apply a clock propagation
flag on the audio clocks of STiH407
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
This patch fixes the following DTC warnings:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Commit d20f997b4d ("ARM: dts: am57xx-beagle-x15: Remove pinmux
configurations for erratum i869") fat fingered a change in which
basically replaced mmc2_pinctrl_default with mmc1_pinctrl_default. And
kernel dutifully reports conflict of usage.
[...]
pinctrl-single 4a003400.pinmux: pin 4a00376c.0 already requested by
4809c000.mmc; cannot claim for 480b4000.mmc
pinctrl-single 4a003400.pinmux: pin-219 (480b4000.mmc) status -22
pinctrl-single 4a003400.pinmux: could not request pin 219 (4a00376c.0)
from group mmc1_pins_default on device pinctrl-single
omap_hsmmc 480b4000.mmc: Error applying setting, reverse things back
omap_hsmmc 480b4000.mmc: could not initialize pin control state
[...]
But, thanks to the fact that we were in fact setting all the muxes in
U-Boot, all the MMC devices were still properly detected.
Fix the typo.
Fixes: d20f997b4d ("ARM: dts: am57xx-beagle-x15: Remove pinmux
configurations for erratum i869")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: removed timestamps and wrapped description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds DT support for the NAND connected to the SoC AEMIF.
Passed torture hashing a 40MB file on top of UBIFS using subpages.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
[khilman: add back default partitions from an earlier patch]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
- Support for new board OMAP-L138 LCDK
- Add AEMIF node on DA850 EVM and use it for NAND
- Audio support for LCDK
- Cleanups for PWM and UART
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7UMP
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.9/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DA850 device-tree enhancements include" from Sekhar Nori:
- Support for new board OMAP-L138 LCDK
- Add AEMIF node on DA850 EVM and use it for NAND
- Audio support for LCDK
- Cleanups for PWM and UART
* tag 'davinci-for-v4.9/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Audio support via simple-card
ARM: dts: da850,da850-evm: Add an aemif node and use it for the NAND
ARM: dts: da850: Add basic DTS for the LCDK
ARM: dts: da850: Add missing pin muxing for the UARTs
ARM: dts: da850: Add new ECAP and EPWM bindings
This reverts commit f80bc97fd0.
The original commit updated the cpufreq operating points tables for
dra7xx but was merged before the driver making use of the node was
merged, which breaks the existing cpufreq implementation on the system,
so revert the patch until the ti-cpufreq driver is merged.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This reverts commit 4317be1162.
The original commit updated the cpufreq operating points tables for
am33xx but was merged before the driver making use of the node was
merged, which breaks the existing cpufreq implementation on the system,
so revert the patch until the ti-cpufreq driver is merged.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This reverts commit c36e6ec904.
The original commit updated the cpufreq operating points tables for
am335x-boneblack but was merged before the driver making use of the node
was merged, which breaks the existing cpufreq implementation on the
system, so revert the patch until the ti-cpufreq driver is merged.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
please pull the following:
- Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the
following updates for Broadcom references boards:
* New Northstar Plus reference boards added: BCM958525er, BCM958522er,
BCM988312hr, BCM958623hr and BCM958622hr
* Add SATA nodes to the BCM958625hr and XMC boards
* Add I2C nodes to the XMC board
* Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards
* Add the GPIO reboot method for BCM958625hr and XMC boards
- Dhanajay adds PWM nodes for the Northstar Plus SoCs
- Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include
- Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for
the USB host mode on BCM283x and finally documents and adds support for the
Raspberry Pi Zero
- Florian adds support for the Northstar Plus Switch Register Access block which
enables the integrated switch on these SoCs and enables the switch ports on the
BCM958625HR reference board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=j84Q
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.9/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.9" from Florian Fainelli:
This pull request contains Broadcom ARM-based Device Tree changes for v4.9,
please pull the following:
- Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the
following updates for Broadcom references boards:
* New Northstar Plus reference boards added: BCM958525er, BCM958522er,
BCM988312hr, BCM958623hr and BCM958622hr
* Add SATA nodes to the BCM958625hr and XMC boards
* Add I2C nodes to the XMC board
* Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards
* Add the GPIO reboot method for BCM958625hr and XMC boards
- Dhanajay adds PWM nodes for the Northstar Plus SoCs
- Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include
- Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for
the USB host mode on BCM283x and finally documents and adds support for the
Raspberry Pi Zero
- Florian adds support for the Northstar Plus Switch Register Access block which
enables the integrated switch on these SoCs and enables the switch ports on the
BCM958625HR reference board
* tag 'arm-soc/for-4.9/devicetree' of http://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: bcm2835: Add Raspberry Pi Zero
DT: bindings: bcm: Add Raspberry Pi Zero
ARM: dts: bcm283x: Add dtsi for USB host mode
ARM: dts: bcm283x: Add missing USB clock
ARM: dts: NSP: Add new DT file for bcm958622hr
ARM: dts: NSP: Add new DT file for bcm958623hr
ARM: dts: NSP: Add new DT file for bcm988312hr
ARM: dts: NSP: Add new DT file for bcm958522er
ARM: dts: NSP: Add new DT file for bcm958525er
ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file
ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file
ARM: dts: NSP: Specify RAM amount for BCM958525XMC board
ARM: dts: NSP: Specify RAM amount for BCM958625K board
ARM: dts: NSP: Enable SATA and add i2c devices on XMC
ARM: dts: NSP: Enable SATA on bcm958625hr
ARM: dts: NSP: Correct RAM amount for BCM958625HR board
ARM: dts: NSP: Add PWM Support to DT
ARM: BCM5301X: Specify PHY of USB 2.0 in DT
ARM: dts: NSP: Add BCM958625HR switch ports
ARM: dts: NSP: Add Switch Register Access Block node
...
This helps to get 100% intensity closer to "always on".
It compensates for an effect of dmtimer which at 100% still emits short
"off" impulses and the startup-time of the DC/DC converter makes
backlight intensity not reach full scale. The lower the PWM frequency
is, the smaller is this effect.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Add and fix a bunch of clocks in the DTS corresponding
to the new clock support merged into the clk tree.
- Move the CLCD display configuration from boardfile to
device tree using the new CLCD support merged into the
fbdev tree.
- Cut some auxdata.
- Cut some static remappings.
- Move the sched_clock() counter to use syscon+regmap.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kkO1
-----END PGP SIGNATURE-----
Merge tag 'integrator-armsoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/late
Pull "This is a bunch of Integrator changes for v4.9" Linus Walleij:
- Add and fix a bunch of clocks in the DTS corresponding
to the new clock support merged into the clk tree.
- Move the CLCD display configuration from boardfile to
device tree using the new CLCD support merged into the
fbdev tree.
- Cut some auxdata.
- Cut some static remappings.
- Move the sched_clock() counter to use syscon+regmap.
* tag 'integrator-armsoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: read counter using syscon/regmap
ARM: integrator: cut down on static maps
ARM: integrator: delete some auxdata
ARM: integrator: move CP CLCD display to DTS
ARM: dts: add the core module clocks to Integrator/CP
ARM: dts: Add the core module clocks to Integrator/AP
ARM: dts: add the Integrator/AP baseboard clocks
ARM: dts: set the 24MHz xtal as parent of the UART clock
The default PHY configuration disables most of the LEDs. The following
configures the ethernet activity LEDs as Netgear intended.
[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This is a router based on the mv88f5181 chipset.
http://www.netgear.com/support/product/WNR854T.aspxhttp://wiki.openwrt.org/toh/netgear/wnr854t
[gregory.clement@free-electrons.com:
- extract dt part from "arm: orion5x: Add DT-based support for Netgear
WNR854T"
- squashed "arm: orion5x: Alias uart0 to serial0 for all orion5x" into
this commit and move serial0 alias from dtsi to dts]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Common definitions for the SoC for board definitions to use.
[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
orion-wdt refuses to start without these properties defined, so lift
definitions out of kirkwood/dove.dtsi
[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch enables the uniperif players 2 & 3 for b2120 boards
and also adds the "simple-audio-card" device node to interconnect
the SoC sound device and the codec.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
This patch adds the DT node for the uniperif reader
IP block found on STiH407 family silicon.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
This patch adds the DT nodes for the uniperif player
IP blocks found on STiH407 family silicon.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
This patch adds the dt node for the internal audio
codec IP.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
This patch adds the pinctrl config for the spidf out
pins used by the sasg codec IP.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
This patch adds the pinctrl config for the i2s_in pins
used by the uniperif reader IP.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
This patch adds the pinctrl config for the i2s_out pins
used by the uniperif player IP.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
These nodes are required to get the fdma driver working
on STiH407 based silicon.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Some omap5 variants have more than 2GB of memory available as
optional models. Let's update the dts files to use two address
cells similar to what dra7 is using with commit dae320ec31
("ARM: dts: DRA7: change address-cells and size-cells").
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Latest update to the BeagleBoard-X15 platform (revision B1)[1] updates
for allowing UHS SD cards to function with the split of supply to SD
card from a dedicated LDO.
As a result of this, AM57xx BeagleBoard-X15 now uses gpio2_30 instead
of gpio6_28 for HDMI because HDMI_LS_OE should now be switched from
GPIO6_28(Y9) to GPIO2_30 (AG8) to avoid a 1.8V GPIO toggling a 3.3V
SoC input when the SD card is in UHS 1.8V mode.
NOTE: For UHS mode to function, we need full fledged IODelay support
in kernel to be functional. IODelay support is yet to be added.
Further, It does not make much sense to spin off a new board
compatible flag since there is no real functional benefit for the
same.
Note: Even though production version is supposed to be B1, there is
over ~200 boards of previous version (A2)[2] out there which continue
to get supported with the existing dts file (to maintain compatibility
with existing bootloaders for A2) and the production board is now
supported as revb1.
[1] https://github.com/beagleboard/beagleboard-x15/blob/master/BEAGLEBOARD_X15_REV_B1.pdf
[2] http://marc.info/?l=linux-arm-kernel&m=147273929820708&w=2
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pinmuxing for DRA7x/AM57x family of processors need to be done in IO
isolation as part of initial bootloader executed from SRAM. This is
done as part of iodelay configuration sequence and is required due
to the limitations introduced by erratum ID: i869[1] (IO Glitches
can occur when changing IO settings) and elaborated in the Technical
Reference Manual[2] 18.4.6.1.7 Isolation Requirements.
Only peripheral that is permitted for dynamic pin mux configuration
is MMC and DCAN. MMC is permitted to change to accommodate the
requirements for varied speeds (which require IO-delay support in
kernel as well). DCAN is a result of i893[1] (DCAN initialization
sequence). However, since we don't use DCAN on X15, with the exception
of MMC, all other pin mux configurations are removed from the dts.
[1] http://www.ti.com/lit/pdf/sprz429
[2] http://www.ti.com/lit/pdf/sprui30
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The LEDs on igepv5 are on the GPIO expander unlike on omap5-uevm.
Configuration copied from git.isee.biz git tree except fixed for
red and blue mapping.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add power button support for igepv5.
Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ID pin GPIO comes from the PMIC. Let's configure it as a GPIO
for the driver to use, and also make sure the PMIC GPIO pin muxing
is correct. The PMIC pad1 and 2 values for omap5-uevm and igepv5 are
0x5a and 0x1b, we only need to clear bit 2 in pad1 register to make
the ID pin GPIO work.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Few changes to fix issues I've noticed while debugging omap5-uevm
wl18xx issues:
1. Move wlcore irq pin muxing under wlcore. This irq could be
different from gpio_wk14 on some board variants
2. Don't configure pull on wlcore irq pin. There is a 10k
pull up resistor R105 on the device to VDDS_1v8_MAIN
3. The padconf register for wlsdio_data1 is wrong, it's really
at 0x1a8 + 2 - 0x40 = 0x16a offset, not at 0x168 as that's
for wlsdio_data0
4. Mark the omap5-uevm wlan as compatible with ti,wl1837 as
that's what the TDK R078 part seems to be
5. The MMC interrupt for WLAN musb be wakeupgen, not gic
Looks like omap5-uevm WLAN behaves better now, but I still seem
to have issues with some access points.
Signed-off-by: Tony Lindgren <tony@atomide.com>
A second set of device tree changes, this time switching a few SoCs to the
new sunxi-ng clock framework. We also added the support for a new SoC
(NextThing GR8 and its evaluation board), and the support for the DRM
driver in the A33.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uy/t
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/late
Merge "Allwinner DT changes for 4.9, take 2" from Maxime Ripard:
A second set of device tree changes, this time switching a few SoCs to the
new sunxi-ng clock framework. We also added the support for a new SoC
(NextThing GR8 and its evaluation board), and the support for the DRM
driver in the A33.
To maintain bisectability, while avoiding some un-trivial merge
conflicts, I had to merge the clk branch that I've sent a PR to Mike
and Stephen. This branch will of course be stable.
* tag 'sunxi-dt-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (53 commits)
ARM: dts: gr8: Add support for the GR8 evaluation board
ARM: dts: Add NextThing GR8 dtsi
ARM: dts: sun8i: Move A23/A33 usbphy and usb_otg nodes to common dtsi
ARM: sun8i: a23/a33: Add RGB666 pins
ARM: sun8i: a33: Add display pipeline
ARM: sun8i: Convert the A23 and A33 to the CCU
ARM: dts: sun6i: switch A31/A31s to new CCU clock bindings
clk: sunxi-ng: Add hardware dependency
clk: sunxi-ng: Add A23 CCU
clk: sunxi-ng: Add A33 CCU support
clk: sunxi-ng: Add N-class clocks support
clk: sunxi-ng: mux: Add mux table macro
clk: sunxi-ng: div: Allow to set a maximum
clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure
clk: sunxi-ng: div: Add mux table macros
devicetree: Add vendor prefix for FriendlyARM
ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
...
-----BEGIN PGP SIGNATURE-----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=C78b
-----END PGP SIGNATURE-----
Merge tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Pull "CLCD graphics on the Nomadik NHK15" from Linus Walleij:
* tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add the CLCD LCD display to the NHK15
ARM: dts: add PMU to the NHK15 device tree
ARM: nomadik: select MFD_SYSCON
dt-bindings: Add TPO TPG110 binding
dt-bindings: add vendor TPO
ARM: dts: add STMPE PWM to the NHK15 device tree
- Add SoC support for i.MX7 Solo which is a reduced version of i.MX7
Dual.
- New board support: Gateworks Ventana i.MX6Q/DL GW553x, Inverse Path
i.MX53 USB armory, i.MX6Q/DL TS-4900 from Technologic Systems,
i.MX6UL GEA M6UL modules from Engicam, i.MX7 Solo Warp7 board.
- Add DMA and IPU CSI devices for i.MX53 SoC support.
- Refine i.MX7 Dual SoC DTS as a preparation of i.MX7 Solo support.
- Use of_graph dt nodes to describe the panel for vf610-colibri and
ls1021a-twr boards.
- Add gpio-ranges property to i.MX6 GPIO controllers, which will be
useful when GPIO driver is changed to request pad configuration as
GPIO function.
- Random device additions or small changes for various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1lb5AAoJEFBXWFqHsHzOBI0H/1ynv4DnmCds1eBS8yjqYJnH
bM02BSwV2gwVQaDljTJCDNoDFMGM3aNjnWge1v4UsfIyDPploMCFi4ympPNsCx3w
VYB+TRQFG6WHIyd6lHBd+VqeTNgPz+LAhpdrNloZecUUIBlpD8i+8WpDw45ufE7b
A7jRIaFWnBjMEsUsG/To5PQDI17YwtkRaht2gq+3rwRdk2hbeVlg05JUcwn1+eBB
DnccJUTy4zZd09W7MRMRM2FejYCququCCfH4is8+1iVLVixwpjEKBHA2w8GatLtn
e8T+ie/FWIizlnK4Jadba1tcRmW8PlX6UAzgWjGia27G6deHQ1x/0YL9eqDsAP0=
=CNTd
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree changes for 4.9" from Shawn Guo:
- Add SoC support for i.MX7 Solo which is a reduced version of i.MX7
Dual.
- New board support: Gateworks Ventana i.MX6Q/DL GW553x, Inverse Path
i.MX53 USB armory, i.MX6Q/DL TS-4900 from Technologic Systems,
i.MX6UL GEA M6UL modules from Engicam, i.MX7 Solo Warp7 board.
- Add DMA and IPU CSI devices for i.MX53 SoC support.
- Refine i.MX7 Dual SoC DTS as a preparation of i.MX7 Solo support.
- Use of_graph dt nodes to describe the panel for vf610-colibri and
ls1021a-twr boards.
- Add gpio-ranges property to i.MX6 GPIO controllers, which will be
useful when GPIO driver is changed to request pad configuration as
GPIO function.
- Random device additions or small changes for various board support.
* tag 'imx-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
ARM: dts: add gpio-ranges property to iMX GPIO controllers
ARM: dts: imx35: add iim module to imx35.dtsi
ARM: dts: vf610-colibri: use of_graph dt nodes to describe the panel
ARM: dts: ls1021a: Add of_graph dt nodes to describe the panel
ARM: dts: imx53: add support for USB armory board
devicetree: Add vendor prefix for Inverse Path
ARM: dts: imx7s-warp: Add Bluetooth support
ARM: dts: imx7s-warp: Add User Button support
ARM: dts: imx7s-warp: Enable I2C2 device support
ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support
ARM: dts: imx6ul iomuxc syscon is compatible to imx6q
ARM: dts: imx7-colibri: add Audio support
ARM: dts: imx7-colibri: add basic supply regulators
ARM: dts: imx7-colibri: move SD-card to module level
ARM: dts: imx6sx: Add GPU bindings
ARM: dts: imx7s-warp: Let the codec control MCLK pinctrl
ARM: dts: imx6ul-pico-hobbit: Use WDOG_B pin reset
ARM: dts: imx6q-bx50v3: configure unused pca953x pins
ARM: dts: imx6sx: document SION necessity of ENET1_REF_CLK1
ARM: dts: imx7s-warp: Use WDOG_B pin reset
...
Split the DTS files in per-revision variants
-----BEGIN PGP SIGNATURE-----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=BnYS
-----END PGP SIGNATURE-----
Merge tag 'realview-dts-split' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Pull "RealView DTS file fixup and split" from Linus Walleij:
Fix the ethernet issue on revision D of the RealView EB
Split the DTS files in per-revision variants
* tag 'realview-dts-split' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: add RealView EB rev D A9 MPCore variant
ARM: dts: split RealView EB 11MPCore variants
ARM: dts: add device tree for the RealView EB Rev D
ARM: dts: fix RealView EB SMSC ethernet version
Contains a couple of cleanups for Tegra114 device trees.
-----BEGIN PGP SIGNATURE-----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=K9Kg
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.9-rc1" from Thierry Reding:
Contains a couple of cleanups for Tegra114 device trees.
* tag 'tegra-for-4.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
ARM: tegra: Fix Tegra114 USB compatible values
and Firefly-reload), display support for the rk3288-evb, support for the
recently added firmware reboot-flag support and some housekeeping cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX0WScAAoJEPOmecmc0R2BEycIAK7/5hV5kyeEA3vx1VaLoRH0
lFHMQyaucbqQCuAu6U6NBwyVGnirvd5HG+KRA34RncLfVT5Fnv81u43byKkaUI/I
8NH6l4FvcND76J1IIR6XZl8cGxaRCT1bkUgII4MFaMaQBxY19gbLCDuBVLVJEhK7
lUy7lG/6j/DvIwU0UevGdB/bdCPZ0WZ6n9InF4xIMJ6PJYI5/BctSpxfJr47hTjQ
a0z637dqXv08L7LRqVtXn+1tJZ6QJdHrtsEavGFOQEzl+n2rRFuBC63+v98h7WCc
1gnyfWbR+NMZOH13imBiOiK7Ap/F5Qm1uF5bfJhoJGbGazv5NcZqPlZ0CocrAXY=
=gktZ
-----END PGP SIGNATURE-----
Merge tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 changes for 4.9" from Heiko Stübner:
32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
recently added firmware reboot-flag support and some housekeeping cleanups.
* tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add sensor-supplies on PopMetal-RK3288 board
ARM: dts: rockchip: fix L3G4200D i2c address on PopMetal-RK3288 board
ARM: dts: rockchip: enable usbotg for Popemtal-rk3288 board
ARM: dts: rockchip: add missing regulators for firefly reload board
ARM: dts: rockchip: remove excess sd properties from firefly reload
ARM: dts: rockchip: add syscon-reboot-mode DT node
soc: rockchip: add reboot-mode header
ARM: dts: rockchip: move rk3288 usbphy under the GRF node
ARM: dts: rockchip: add rk3288-firefly-reload
ARM: dts: rockchip: add dts for RK3288-Fennec boards
ARM: dts: rockchip: add the panel power supply for rk3288-evb board with rk808 pmu
ARM: dts: rockchip: add the panel power supply for rk3288-evb board with act8846 pmu
ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb
Business as usual on our side, with a mix of new boards and new IPs enabled
on boards:
- Support for the GPIO found on the AXP PMIC
- ESP8089 on the relevant boards
- More boards converted to the reference design and q8 designs
- New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
Nano Pi Neo
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJX0G1eAAoJEBx+YmzsjxAglB8P/j3Z9WDnNVh5MFuvJpPvT5Sc
E4KiVmL5L5cHRAdJLS3sUTBCHzhv3iJZaHHmPVzRpDYwYL+XMieNpS7CknkD8Sct
h5LtPk4ukazsrx86TEeBQ1CCBkI2CqXVnD/v68FY8rbIKGPOk52lUrI3lhbuHT1w
XCSJj4SAMnHfmQWYE+eQpEYndWnMQCijdr3X2OuWl7WG+N+7d0h43QfA2GgR4Thv
jP/s43LBgMf+GnVLn8hMgI2XZCv/TK+9ZWiDrDDNRS1dwlDrkcKfS+gMOM0sMzON
tOs3OK4pLB37SQ4+7V3x8Vne7xWVmPXCr8gVYh1AZGLCpSGDNImNVDv9lvNiJiya
PxbAgGx5eEJ1J4oZ9httT0vp4IGmGew1ZeRIij35+bOECAvNJ09bjMFguaVv3Mv5
6vKXmbqW2j07TrneKZJMP5L9vheto1Z5AwWDAYDCmxHnkzXCyFNJ5oeo+lvg6EV5
YWme3WdmLZtcLDIuffa1mlZ5CrtkV+QPdv/SqE/LBhXTSWiPwTaQaqlr57/+/e4Y
fu2ECKBOP7Y3tanBHHJOMovX8rQ259TadmGOZWDh4bR/9CJ6J/OUWmYwvutBwVOc
n17g3erYtNQm6/buGpqFTRsT9/EL5zQESJt2x2/DZwOOUipBRkm23Jd0kz/q7juw
APAzF3rtbo20wld0ueMF
=3Q+E
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner DT changes for 4.9" from Maxime Ripard:
Business as usual on our side, with a mix of new boards and new IPs enabled
on boards:
- Support for the GPIO found on the AXP PMIC
- ESP8089 on the relevant boards
- More boards converted to the reference design and q8 designs
- New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
Nano Pi Neo
* tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (31 commits)
devicetree: Add vendor prefix for FriendlyARM
ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
ARM: dts: sun8i: Add PWM controller node in H3
ARM: dts: sun8i: Add dts file for inet-d978_rev2 tablets
ARM: dts: sun9i: Add missing #interrupt-cells to R_PIO pinctrl device node
ARM: dts: sun8i: Rename reference-design-tablet touchscreen node
ARM: dts: sun5i: Add dts file for the Empire Electronix M712 tablet
ARM: dts: sun5i: Convert inet-98v-rev2 dts to use reference-design-tablet.dtsi
ARM: dts: sun4i: Disable ohci1 on ba10-tv-box
ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2809
ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2407
ARM: dts: sun8i: add NAND controller node for A23/A33
ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB
ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi
ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 node
ARM: dts: sun9i: Switch to the AC100 RTC clock outputs for osc32k
ARM: dts: sun9i: cubieboard4: Add device node for AC100
...
* Removal of skeleton.dtsi from the common armv7-m dtsi together
with lpc18xx and efm32 platforms.
* Fix for unit address warnings from the dtc on lpc18xx/efm32.
That is made possible with skeleton.dtsi gone.
-----BEGIN PGP SIGNATURE-----
iQEwBAABCAAaBQJXzyBlExxtYW5hYmlhbkBnbWFpbC5jb20ACgkQXnNIfj7+P9rV
UwgAvfI2Lv75gqxfLhbIeKeY5Mxms8KGTmGJFX/xAIb9vUynAuVPhDnoie+bvDtA
9lvJCAwL2pyrb5cyeofjq1lMscX8Ng6mSyrUZ+nhzZNXgNzPK0Z169gcLhugnNW5
mk4TACKstfiCVQxlB1xa4JHa4/8r8EJ2ouB3Fwd6Zi1OJfC9bU9FFIgjOxfIRhWn
W8swy5c1sufbUHnQbZeVCweCN4P6tAQN+bxaKgKawmWaVpCz/6jF/dRsD0zj8UHb
J2nBSjo1Vac25ET9bz5K0jjNOK9BdOcvgbxD/EDDYTwQCbouRpnv+uQctVSyY98n
2GIiX1Bk1W02NmKvXXQ/6RRz7g==
=uht9
-----END PGP SIGNATURE-----
Merge tag 'lpc18xx_dts_for_4.9_part2' of https://github.com/manabian/linux-lpc into next/dt
Pull "Device Tree clean up for LPC18xx platform" from Joachim Eastwood:
* Removal of skeleton.dtsi from the common armv7-m dtsi together
with lpc18xx and efm32 platforms.
* Fix for unit address warnings from the dtc on lpc18xx/efm32.
That is made possible with skeleton.dtsi gone.
* tag 'lpc18xx_dts_for_4.9_part2' of https://github.com/manabian/linux-lpc:
ARM: dts: efm32: remove skeleton.dtsi include and fix unit address warnings
ARM: dts: lpc18xx: remove skeleton.dtsi include and fix unit address warnings
ARM: dts: armv7-m: remove skeleton.dtsi include
- update for Armada XP/38x allowing using direct access SPI
- various improvement for Armada 39x platforms
- add pinctrl information for NANd on Armada 38x
- fix the kirkwood based Openblock A6 external GPIO pins
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQ0gACgkQCwYYjhRyO9XZQgCfVtygCoGhhk2ou4huuBcWlutL
It0An1jM4iRF4RwgWtikxEV00Ovg4dJw
=LoDw
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.9 (part 1)" from Gregory CLEMENT:
- update for Armada XP/38x allowing using direct access SPI
- various improvement for Armada 39x platforms
- add pinctrl information for NANd on Armada 38x
- fix the kirkwood based Openblock A6 external GPIO pins
* tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: fix reference to a390 spi controller
ARM: dts: armada-38x: Add NAND pinctrl information
ARM: dts: kirkwood: Fix Openblock A6 external GPIO pins
ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board
ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB board
ARM: dts: mvebu: armada-398-db: enable supported usb interfaces
ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces
ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family
ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs
ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's
ARM: dts: mvebu: armada-39x: enable watchdog for all Armada-39x SoCs
ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x SoCs
ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and Coherency fabric
ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
ARM: dts: mvebu: armada-390: add missing compatibility string and bracket
ARM: dts: mvebu: a385-db-ap: add default partition description for NAND
ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port
ARM: dts: mvebu: armada-370-xp: Add MBus mappings for all SPI devices
ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node
ARM: dts: mvebu: Add SPI1 pinctrl defines for Armada XP
As noted in commit 3ebee5a2e1 ("arm64: dts: kill skeleton.dtsi"),
there are a number of problems with skeleton.dtsi, and it would be
prefereable to remove it entirely. As there are a large number of
existing users, fixing these up will take a while.
This patch adds a note to arm's skeleton.dtsi noting that this is the
case, to make this more obvious and hopefully minimize new uptake of
skeleton.dtsi in the mean time.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update elm phandle for am335x
- Fix overo NAND gpmc ranges, this has always been broken so it can
wait for the merge window
- Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
as it's been using the older configration since the dts got added
- A series of dtc warning fixes for unit names
- Keep dcdc3, 5 and 6 enabled during suspend on am347x boards
- Disable DDR regulator during rtc-only/poweroff mode for am437x boards
- Remove redundant regulator compatibles for am437x boards
- Increas QSPI max frequency for dra7 boards
- Enable QSPI for am57xx-idk-common
- Enable am335x-wega audio support
- Workaround for i845 for dra7
- Update binding for logicpd boards
- Add gpio-decoder nodes for am335x-icev2 board
- Add linux,pci-domain property for dra7
- Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
entries, these can wait for merge window as Ethernet works on dra7
- A series of changes to drop skeleton.dtsi because of dtc warnings
-----BEGIN PGP SIGNATURE-----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=k+4W
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren:
- Update elm phandle for am335x
- Fix overo NAND gpmc ranges, this has always been broken so it can
wait for the merge window
- Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
as it's been using the older configration since the dts got added
- A series of dtc warning fixes for unit names
- Keep dcdc3, 5 and 6 enabled during suspend on am347x boards
- Disable DDR regulator during rtc-only/poweroff mode for am437x boards
- Remove redundant regulator compatibles for am437x boards
- Increas QSPI max frequency for dra7 boards
- Enable QSPI for am57xx-idk-common
- Enable am335x-wega audio support
- Workaround for i845 for dra7
- Update binding for logicpd boards
- Add gpio-decoder nodes for am335x-icev2 board
- Add linux,pci-domain property for dra7
- Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
entries, these can wait for merge window as Ethernet works on dra7
- A series of changes to drop skeleton.dtsi because of dtc warnings
* tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits)
ARM: dts: dra7: Add missing unit name to memory nodes
ARM: dts: dra62x: Add missing unit name to memory nodes
ARM: dts: dm8168: Add missing unit name to memory nodes
ARM: dts: dm8148: Add missing unit name to memory nodes
ARM: dts: am572x: Add missing unit name to memory nodes
ARM: dts: am4372: Add missing unit name to memory nodes
ARM: dts: am3517: Add missing unit name to memory nodes
ARM: dts: am335x: Add missing unit name to memory nodes
ARM: dts: omap5: Add missing unit name to memory nodes
ARM: dts: omap4: Add missing unit name to memory nodes
ARM: dts: omap3: Add missing unit name to memory nodes
ARM: dts: omap2: Add missing unit name to memory nodes
ARM: dts: am4372: Remove skeleton.dtsi usage
ARM: dts: dra7: Remove skeleton.dtsi usage
ARM: dts: dm816x: Remove skeleton.dtsi usage
ARM: dts: dm814x: Remove skeleton.dtsi usage
ARM: dts: am33xx: Remove skeleton.dtsi usage
ARM: dts: omap5: Remove skeleton.dtsi usage
ARM: dts: omap4: Remove skeleton.dtsi usage
ARM: dts: omap3: Remove skeleton.dtsi usage
...
* Match DT names other projects and documents
* Switch over to PSCI
* Use clock/reset drivers
* Misc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=E7B0
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
Merge "UniPhier ARM SoC DT updates for v4.9" from Masahiro Yamada:
* Match DT names other projects and documents
* Switch over to PSCI
* Use clock/reset drivers
* Misc
* tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add specific compatible to SoC-Glue node
ARM: dts: uniphier: use clock/reset controllers
ARM: dts: uniphier: switch over to PSCI
ARM: dts: uniphier: match DT names to other projects and documents
ARM: dts: uniphier: remove a whitespace after tabs
1. Set chosen serial bitrate which allows proper serial output when
bootloader does pass all the data in command line.
2. Cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8Yu8
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski:
1. Set chosen serial bitrate which allows proper serial output when
bootloader does pass all the data in command line.
2. Cleanup.
* tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4
Small fix for the compatible string for the NXP SE97 I2C chip on the
Hitex Eval board from Guenter and a couple of additional DT properties
for the DWMAC that is need for correct operation.
-----BEGIN PGP SIGNATURE-----
iQEwBAABCAAaBQJXwaK1ExxtYW5hYmlhbkBnbWFpbC5jb20ACgkQXnNIfj7+P9pm
QggAtv1kaNAQoEliCaHtHOdBhpgTNZJoYUnUWUUuhl8fwpin3/b/c6NJyupACbJB
YN9zj4Ijus6veqdKSG/SyyLeiouJcNvL2azj2r7zlpt0qXeqBzmZx9iBRcLB4vK+
/mlTmdUVYAcnOINnasC5A007m8PbUKSIulDOFuER+IpR54gI5uYv8KaQpJ0POzJO
LcIlMr0HnzniRWNL5XniGmaILo5HUTNuKNvpZc1FW2TFaz+ICMQw7GfK+bM76dhD
ezegetPT+kjxYamQAl/JduWQ+PAmzW3vucy0c1wYr1NvHYEObHe8DKpWDJmjQMdz
coGmSgWNoXjFmg4wbQ2l1sqYSw==
=QuiX
-----END PGP SIGNATURE-----
Merge tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc into next/dt
Merge "Device Tree additions for LPC18xx platform" from Joachim Eastwood:
Small fix for the compatible string for the NXP SE97 I2C chip on the
Hitex Eval board from Guenter and a couple of additional DT properties
for the DWMAC that is need for correct operation.
* tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc:
ARM: dts: lpc18xx: configure dwmac properly
ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device
Use the cache settings that were determined to give best performance
on artpec-6 typical workloads.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GR8-EVB is a small board with an NextThing GR8, an Hynix MLC NAND,
an AXP209 PMIC, USB host and OTG, an SPDIF output and a connectors for CSI,
I2S and LCD.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The GR8 is an SoC made by Nextthing loosely based on the sun5i family.
Since it's not clear yet what we can factor out and merge with the A10s and
A13 support, let's keep it out of the sun5i.dtsi include tree. We will
figure out what can be shared when things settle down.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The usbphy and usb_otg nodes in the A23 and A33 dts files only differ
by compatible, and for the usbphy, the size of one of its register
regions.
Move all the common bits to the A23/A33 common dtsi file.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
