mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-01-24 18:09:30 +07:00
DTS related changes for omaps for v4.9 merge window:
- Update elm phandle for am335x - Fix overo NAND gpmc ranges, this has always been broken so it can wait for the merge window - Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too as it's been using the older configration since the dts got added - A series of dtc warning fixes for unit names - Keep dcdc3, 5 and 6 enabled during suspend on am347x boards - Disable DDR regulator during rtc-only/poweroff mode for am437x boards - Remove redundant regulator compatibles for am437x boards - Increas QSPI max frequency for dra7 boards - Enable QSPI for am57xx-idk-common - Enable am335x-wega audio support - Workaround for i845 for dra7 - Update binding for logicpd boards - Add gpio-decoder nodes for am335x-icev2 board - Add linux,pci-domain property for dra7 - Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree entries, these can wait for merge window as Ethernet works on dra7 - A series of changes to drop skeleton.dtsi because of dtc warnings -----BEGIN PGP SIGNATURE----- iQIuBAABCAAYBQJXyErxERx0b255QGF0b21pZGUuY29tAAoJEBvUPslcq6VzEU0Q ALfYnZ2/cNZ8ZkQ0jDLSxAOgb6SrXM5L6iUIYCyVuO6JP+lU88Zn0iQlB1wcD+e8 Gx87pnexDmPHznwrwWDyXqP6U89vJM9eBdUHoGIt8fr0On7DGQXAN1yrHN+N2kxa y7DDePdu1InQM0oXeVqrKdSDNwnCMJpsdHOjmlB1bH83arrMOsG1bZZG3b5LgSTT zJss1l3ipw2YJhkGheHCai6bClrko9z8OcbmSF4qogMDs19+QiC9AZ2lIwAF8czG ll+/0Mwb9v0K4R/u+KZ9wC8tjz+Skitt0ffDSBpmP7ZBVJRRr5s3PxYDH6vSs+tM zVNH2jy1SvnSpxJ3lpIis1WzMi2hr9X9iM3qTzRX5JE+wBGuas1CDVy5duQXtb4d QRZWeHdQAX+x5MIRuVgYks6uDPHd6J6uXTlLNjASw5MRDSAGqnYv65BxYc+v5wyW v0kj+yQk9ewiwIL3z0T4mJg04mO/hFh+G/B868Un/uafuxvoxEGH1TaSEz3j1Ow3 o1OGkxVWJj4N/tc7EP1EIqjFid6wAeu1eJdFkqv3zJjphOfKhToFg2T/5bUjbrFD mlRyx3aOBxwbrkTUcSC5Qxy/q9DFT7kYm4RESk03zID2QTJmcTpwqNaYX6/jmVFT xK7mWB4kyTkl/wC+/XJgLztsm79cDY0cWLDQd0zskyqU =k+4W -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren: - Update elm phandle for am335x - Fix overo NAND gpmc ranges, this has always been broken so it can wait for the merge window - Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too as it's been using the older configration since the dts got added - A series of dtc warning fixes for unit names - Keep dcdc3, 5 and 6 enabled during suspend on am347x boards - Disable DDR regulator during rtc-only/poweroff mode for am437x boards - Remove redundant regulator compatibles for am437x boards - Increas QSPI max frequency for dra7 boards - Enable QSPI for am57xx-idk-common - Enable am335x-wega audio support - Workaround for i845 for dra7 - Update binding for logicpd boards - Add gpio-decoder nodes for am335x-icev2 board - Add linux,pci-domain property for dra7 - Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree entries, these can wait for merge window as Ethernet works on dra7 - A series of changes to drop skeleton.dtsi because of dtc warnings * tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits) ARM: dts: dra7: Add missing unit name to memory nodes ARM: dts: dra62x: Add missing unit name to memory nodes ARM: dts: dm8168: Add missing unit name to memory nodes ARM: dts: dm8148: Add missing unit name to memory nodes ARM: dts: am572x: Add missing unit name to memory nodes ARM: dts: am4372: Add missing unit name to memory nodes ARM: dts: am3517: Add missing unit name to memory nodes ARM: dts: am335x: Add missing unit name to memory nodes ARM: dts: omap5: Add missing unit name to memory nodes ARM: dts: omap4: Add missing unit name to memory nodes ARM: dts: omap3: Add missing unit name to memory nodes ARM: dts: omap2: Add missing unit name to memory nodes ARM: dts: am4372: Remove skeleton.dtsi usage ARM: dts: dra7: Remove skeleton.dtsi usage ARM: dts: dm816x: Remove skeleton.dtsi usage ARM: dts: dm814x: Remove skeleton.dtsi usage ARM: dts: am33xx: Remove skeleton.dtsi usage ARM: dts: omap5: Remove skeleton.dtsi usage ARM: dts: omap4: Remove skeleton.dtsi usage ARM: dts: omap3: Remove skeleton.dtsi usage ...
This commit is contained in:
Arnd Bergmann
commit
3abb0c6cdc
@ -180,3 +180,9 @@ Boards:
|
||||
|
||||
- DRA722 EVM: Software Development Board for DRA722
|
||||
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
|
||||
|
||||
- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
|
||||
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
|
||||
|
||||
- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth
|
||||
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"
|
||||
|
||||
@ -24,12 +24,12 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -37,7 +37,7 @@ vbat: fixedregulator@0 {
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wl12xx_vmmc: fixedregulator@2 {
|
||||
wl12xx_vmmc: fixedregulator2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_gpio>;
|
||||
compatible = "regulator-fixed";
|
||||
@ -226,7 +226,7 @@ nand@0,0 {
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
elm_id = <&elm>;
|
||||
ti,elm-id = <&elm>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -29,13 +29,13 @@ leds_base {
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "base:red:user";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "base:green:user";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
|
||||
default-state = "off";
|
||||
|
||||
@ -13,7 +13,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
@ -28,28 +28,28 @@ leds {
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "beaglebone:green:heartbeat";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "beaglebone:green:mmc0";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
led4 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
led5 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc1";
|
||||
@ -57,7 +57,7 @@ led@5 {
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -19,7 +19,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -17,7 +17,7 @@ / {
|
||||
model = "CompuLab CM-T335";
|
||||
compatible = "compulab,cm-t335", "ti,am33xx";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
@ -26,7 +26,7 @@ leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_led_pins>;
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "cm_t335:green";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
|
||||
linux,default-trigger = "heartbeat";
|
||||
@ -34,7 +34,7 @@ led@0 {
|
||||
};
|
||||
|
||||
/* regulator for mmc */
|
||||
vmmc_fixed: fixedregulator@0 {
|
||||
vmmc_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmc_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
@ -42,7 +42,7 @@ vmmc_fixed: fixedregulator@0 {
|
||||
};
|
||||
|
||||
/* Regulator for WiFi */
|
||||
vwlan_fixed: fixedregulator@2 {
|
||||
vwlan_fixed: fixedregulator2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vwlan_fixed";
|
||||
gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
|
||||
|
||||
@ -20,12 +20,12 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -33,13 +33,13 @@ vbat: fixedregulator@0 {
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
lis3_reg: fixedregulator@1 {
|
||||
lis3_reg: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lis3_reg";
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wlan_en_reg: fixedregulator@2 {
|
||||
wlan_en_reg: fixedregulator2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan-en-regulator";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
@ -53,7 +53,7 @@ wlan_en_reg: fixedregulator@2 {
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
matrix_keypad: matrix_keypad@0 {
|
||||
matrix_keypad: matrix_keypad0 {
|
||||
compatible = "gpio-matrix-keypad";
|
||||
debounce-delay-ms = <5>;
|
||||
col-scan-delay-us = <2>;
|
||||
@ -73,20 +73,20 @@ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
|
||||
0x0201006c>; /* DOWN */
|
||||
};
|
||||
|
||||
gpio_keys: volume_keys@0 {
|
||||
gpio_keys: volume_keys0 {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
|
||||
switch@9 {
|
||||
switch9 {
|
||||
label = "volume-up";
|
||||
linux,code = <115>;
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
switch@10 {
|
||||
switch10 {
|
||||
label = "volume-down";
|
||||
linux,code = <114>;
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
|
||||
@ -27,12 +27,12 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -40,13 +40,13 @@ vbat: fixedregulator@0 {
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
lis3_reg: fixedregulator@1 {
|
||||
lis3_reg: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lis3_reg";
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wl12xx_vmmc: fixedregulator@2 {
|
||||
wl12xx_vmmc: fixedregulator2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_gpio>;
|
||||
compatible = "regulator-fixed";
|
||||
@ -58,7 +58,7 @@ wl12xx_vmmc: fixedregulator@2 {
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vtt_fixed: fixedregulator@3 {
|
||||
vtt_fixed: fixedregulator3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
@ -75,26 +75,26 @@ leds {
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "evmsk:green:usr0";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "evmsk:green:usr1";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "evmsk:green:mmc0";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
led4 {
|
||||
label = "evmsk:green:heartbeat";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
@ -102,31 +102,31 @@ led@4 {
|
||||
};
|
||||
};
|
||||
|
||||
gpio_buttons: gpio_buttons@0 {
|
||||
gpio_buttons: gpio_buttons0 {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch@1 {
|
||||
switch1 {
|
||||
label = "button0";
|
||||
linux,code = <0x100>;
|
||||
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
switch@2 {
|
||||
switch2 {
|
||||
label = "button1";
|
||||
linux,code = <0x101>;
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
switch@3 {
|
||||
switch3 {
|
||||
label = "button2";
|
||||
linux,code = <0x102>;
|
||||
gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
switch@4 {
|
||||
switch4 {
|
||||
label = "button3";
|
||||
linux,code = <0x103>;
|
||||
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
@ -19,12 +19,12 @@ / {
|
||||
model = "TI AM3359 ICE-V2";
|
||||
compatible = "ti,am3359-icev2", "ti,am33xx";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -32,7 +32,7 @@ vbat: fixedregulator@0 {
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vtt_fixed: fixedregulator@1 {
|
||||
vtt_fixed: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
@ -43,52 +43,52 @@ vtt_fixed: fixedregulator@1 {
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
leds@0 {
|
||||
leds0 {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "out0";
|
||||
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "out1";
|
||||
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "out2";
|
||||
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "out3";
|
||||
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
led4 {
|
||||
label = "out4";
|
||||
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
led5 {
|
||||
label = "out5";
|
||||
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@6 {
|
||||
led6 {
|
||||
label = "out6";
|
||||
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@7 {
|
||||
led7 {
|
||||
label = "out7";
|
||||
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
@ -96,49 +96,58 @@ led@7 {
|
||||
};
|
||||
|
||||
/* Tricolor status LEDs */
|
||||
leds@1 {
|
||||
leds1 {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds>;
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "status0:red:cpu0";
|
||||
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "cpu0";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "status0:green:usr";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "status0:yellow:usr";
|
||||
gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "status1:red:mmc0";
|
||||
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
led4 {
|
||||
label = "status1:green:usr";
|
||||
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
led5 {
|
||||
label = "status1:yellow:usr";
|
||||
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
gpio-decoder {
|
||||
compatible = "gpio-decoder";
|
||||
gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
|
||||
<&pca9536 2 GPIO_ACTIVE_HIGH>,
|
||||
<&pca9536 1 GPIO_ACTIVE_HIGH>,
|
||||
<&pca9536 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,axis = <0>; /* ABS_X */
|
||||
decoder-max-value = <9>;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
|
||||
@ -20,7 +20,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
@ -31,14 +31,14 @@ leds {
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "com:green:user";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -46,7 +46,7 @@ vbat: fixedregulator@0 {
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vmmc: fixedregulator@0 {
|
||||
vmmc: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
@ -161,7 +161,7 @@ nand@0,0 {
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
elm_id = <&elm>;
|
||||
ti,elm-id = <&elm>;
|
||||
|
||||
/* MTD partition table */
|
||||
partition@0 {
|
||||
|
||||
@ -19,13 +19,13 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
/* Power supply provides a fixed 5V @2A */
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -34,7 +34,7 @@ vbat: fixedregulator@0 {
|
||||
};
|
||||
|
||||
/* Power supply provides a fixed 3.3V @3A */
|
||||
vmmcsd_fixed: fixedregulator@1 {
|
||||
vmmcsd_fixed: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -19,7 +19,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
@ -27,7 +27,7 @@ memory {
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "nanobone:green:usr1";
|
||||
gpios = <&gpio1 5 0>;
|
||||
default-state = "off";
|
||||
|
||||
@ -20,7 +20,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
@ -41,15 +41,15 @@ sound: sound_iface {
|
||||
compatible = "ti,da830-evm-audio";
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
};
|
||||
|
||||
v3v3c_reg: fixedregulator@1 {
|
||||
v3v3c_reg: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
};
|
||||
|
||||
vdd5_reg: fixedregulator@2 {
|
||||
vdd5_reg: fixedregulator2 {
|
||||
compatible = "regulator-fixed";
|
||||
};
|
||||
};
|
||||
@ -595,14 +595,14 @@ &leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds_pins>;
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "pepper:user0:blue";
|
||||
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "pepper:user1:red";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
@ -616,21 +616,21 @@ &buttons {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@0 {
|
||||
button0 {
|
||||
label = "home";
|
||||
linux,code = <KEY_HOME>;
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button@1 {
|
||||
button1 {
|
||||
label = "menu";
|
||||
linux,code = <KEY_MENU>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
buttons@2 {
|
||||
buttons2 {
|
||||
label = "power";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
|
||||
@ -25,7 +25,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
@ -33,7 +33,7 @@ memory {
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
vcc5v: fixedregulator@0 {
|
||||
vcc5v: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -197,7 +197,7 @@ nandflash: nand@0,0 {
|
||||
gpmc,wr-access-ns = <30>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
|
||||
elm_id = <&elm>;
|
||||
ti,elm-id = <&elm>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
@ -64,50 +64,50 @@ leds {
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "shc:power:red";
|
||||
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "shc:power:bl";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "timer";
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "shc:lan:red";
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
led4 {
|
||||
label = "shc:lan:bl";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
led5 {
|
||||
label = "shc:cloud:red";
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@6 {
|
||||
led6 {
|
||||
label = "shc:cloud:bl";
|
||||
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -19,6 +19,11 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
@ -28,25 +33,25 @@ leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "sl50:green:usr0";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "sl50:red:usr1";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "sl50:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "sl50:red:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
@ -103,7 +108,7 @@ emmc_pwrseq: pwrseq@0 {
|
||||
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -11,10 +11,14 @@ / {
|
||||
model = "Phytec AM335x phyBOARD-WEGA";
|
||||
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
|
||||
|
||||
sound: sound_iface {
|
||||
compatible = "ti,da830-evm-audio";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
vcc3v3: fixedregulator@1 {
|
||||
vcc3v3: fixedregulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
@ -24,6 +28,58 @@ vcc3v3: fixedregulator@1 {
|
||||
};
|
||||
};
|
||||
|
||||
/* Audio */
|
||||
&am33xx_pinmux {
|
||||
mcasp0_pins: pinmux_mcasp0 {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
|
||||
AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
|
||||
AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
|
||||
AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
|
||||
AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
tlv320aic3007: tlv320aic3007@18 {
|
||||
compatible = "ti,tlv320aic3007";
|
||||
reg = <0x18>;
|
||||
AVDD-supply = <&vcc3v3>;
|
||||
IOVDD-supply = <&vcc3v3>;
|
||||
DRVDD-supply = <&vcc3v3>;
|
||||
DVDD-supply = <&vdig1_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&mcasp0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcasp0_pins>;
|
||||
op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
|
||||
tdm-slots = <2>;
|
||||
serial-dir = <
|
||||
2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
|
||||
>;
|
||||
tx-num-evt = <16>;
|
||||
rt-num-evt = <16>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
ti,model = "AM335x-Wega";
|
||||
ti,audio-codec = <&tlv320aic3007>;
|
||||
ti,mcasp-controller = <&mcasp0>;
|
||||
ti,audio-routing =
|
||||
"Line Out", "LLOUT",
|
||||
"Line Out", "RLOUT",
|
||||
"LINE1L", "Line In",
|
||||
"LINE1R", "Line In";
|
||||
clocks = <&mcasp0_fck>;
|
||||
clock-names = "mclk";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* CAN Busses */
|
||||
&am33xx_pinmux {
|
||||
dcan1_pins: pinmux_dcan1 {
|
||||
@ -99,6 +155,12 @@ &mmc1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Power */
|
||||
&vdig1_reg {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* UARTs */
|
||||
&am33xx_pinmux {
|
||||
uart0_pins: pinmux_uart0 {
|
||||
|
||||
@ -11,11 +11,11 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/am33xx.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,am33xx";
|
||||
interrupt-parent = <&intc>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
|
||||
@ -15,7 +15,7 @@ / {
|
||||
model = "TI AM3517 CraneBoard (TMDSEVM3517)";
|
||||
compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
|
||||
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -15,7 +15,7 @@ aliases {
|
||||
serial3 = &uart4;
|
||||
};
|
||||
|
||||
ocp {
|
||||
ocp@68000000 {
|
||||
am35x_otg_hs: am35x_otg_hs@5c040000 {
|
||||
compatible = "ti,omap3-musb";
|
||||
ti,hwmods = "am35x_otg_hs";
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "TeeJet Mt.Ventoux";
|
||||
compatible = "teejet,mt_ventoux", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -11,12 +11,16 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,am4372", "ti,am43";
|
||||
interrupt-parent = <&wakeupgen>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
@ -132,7 +136,7 @@ l2-cache-controller@48242000 {
|
||||
cache-level = <2>;
|
||||
};
|
||||
|
||||
ocp {
|
||||
ocp@44000000 {
|
||||
compatible = "ti,am4372-l3-noc", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
@ -209,7 +209,6 @@ tps65218: tps65218@24 {
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
dcdc1: regulator-dcdc1 {
|
||||
compatible = "ti,tps65218-dcdc1";
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1144000>;
|
||||
@ -218,7 +217,6 @@ dcdc1: regulator-dcdc1 {
|
||||
};
|
||||
|
||||
dcdc2: regulator-dcdc2 {
|
||||
compatible = "ti,tps65218-dcdc2";
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1378000>;
|
||||
@ -227,7 +225,6 @@ dcdc2: regulator-dcdc2 {
|
||||
};
|
||||
|
||||
dcdc3: regulator-dcdc3 {
|
||||
compatible = "ti,tps65218-dcdc3";
|
||||
regulator-name = "vdcdc3";
|
||||
regulator-suspend-enable;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
@ -237,7 +234,6 @@ dcdc3: regulator-dcdc3 {
|
||||
};
|
||||
|
||||
dcdc5: regulator-dcdc5 {
|
||||
compatible = "ti,tps65218-dcdc5";
|
||||
regulator-name = "v1_0bat";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
@ -246,7 +242,6 @@ dcdc5: regulator-dcdc5 {
|
||||
};
|
||||
|
||||
dcdc6: regulator-dcdc6 {
|
||||
compatible = "ti,tps65218-dcdc6";
|
||||
regulator-name = "v1_8bat";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
@ -255,7 +250,6 @@ dcdc6: regulator-dcdc6 {
|
||||
};
|
||||
|
||||
ldo1: regulator-ldo1 {
|
||||
compatible = "ti,tps65218-ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
|
||||
@ -58,7 +58,7 @@ backlight {
|
||||
default-brightness-level = <8>;
|
||||
};
|
||||
|
||||
matrix_keypad: matrix_keypad@0 {
|
||||
matrix_keypad: matrix_keypad0 {
|
||||
compatible = "gpio-matrix-keypad";
|
||||
debounce-delay-ms = <5>;
|
||||
col-scan-delay-us = <2>;
|
||||
@ -513,7 +513,6 @@ tps65218: tps65218@24 {
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
dcdc1: regulator-dcdc1 {
|
||||
compatible = "ti,tps65218-dcdc1";
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1144000>;
|
||||
@ -522,7 +521,6 @@ dcdc1: regulator-dcdc1 {
|
||||
};
|
||||
|
||||
dcdc2: regulator-dcdc2 {
|
||||
compatible = "ti,tps65218-dcdc2";
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1378000>;
|
||||
@ -531,33 +529,42 @@ dcdc2: regulator-dcdc2 {
|
||||
};
|
||||
|
||||
dcdc3: regulator-dcdc3 {
|
||||
compatible = "ti,tps65218-dcdc3";
|
||||
regulator-name = "vdcdc3";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
regulator-state-disk {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc5: regulator-dcdc5 {
|
||||
compatible = "ti,tps65218-dcdc5";
|
||||
regulator-name = "v1_0bat";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc6: regulator-dcdc6 {
|
||||
compatible = "ti,tps65218-dcdc6";
|
||||
regulator-name = "v1_8bat";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo1: regulator-ldo1 {
|
||||
compatible = "ti,tps65218-ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
|
||||
@ -104,7 +104,7 @@ gpio_keys: gpio_keys {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch@0 {
|
||||
switch0 {
|
||||
label = "power-button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
||||
|
||||
@ -64,7 +64,7 @@ sound_master: simple-audio-card,codec {
|
||||
};
|
||||
};
|
||||
|
||||
matrix_keypad: matrix_keypad@0 {
|
||||
matrix_keypad: matrix_keypad0 {
|
||||
compatible = "gpio-matrix-keypad";
|
||||
|
||||
pinctrl-names = "default";
|
||||
@ -93,28 +93,28 @@ leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "am437x-sk:red:heartbeat";
|
||||
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "am437x-sk:green:mmc1";
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "am437x-sk:blue:cpu0";
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "am437x-sk:blue:usr3";
|
||||
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
|
||||
default-state = "off";
|
||||
@ -428,7 +428,6 @@ tps@24 {
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
dcdc1: regulator-dcdc1 {
|
||||
compatible = "ti,tps65218-dcdc1";
|
||||
/* VDD_CORE limits min of OPP50 and max of OPP100 */
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <912000>;
|
||||
@ -438,7 +437,6 @@ dcdc1: regulator-dcdc1 {
|
||||
};
|
||||
|
||||
dcdc2: regulator-dcdc2 {
|
||||
compatible = "ti,tps65218-dcdc2";
|
||||
/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <912000>;
|
||||
@ -448,16 +446,20 @@ dcdc2: regulator-dcdc2 {
|
||||
};
|
||||
|
||||
dcdc3: regulator-dcdc3 {
|
||||
compatible = "ti,tps65218-dcdc3";
|
||||
regulator-name = "vdds_ddr";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
regulator-state-disk {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc4: regulator-dcdc4 {
|
||||
compatible = "ti,tps65218-dcdc4";
|
||||
regulator-name = "v3_3d";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
@ -465,8 +467,31 @@ dcdc4: regulator-dcdc4 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc5: regulator-dcdc5 {
|
||||
compatible = "ti,tps65218-dcdc5";
|
||||
regulator-name = "v1_0bat";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc6: regulator-dcdc6 {
|
||||
compatible = "ti,tps65218-dcdc6";
|
||||
regulator-name = "v1_8bat";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo1: regulator-ldo1 {
|
||||
compatible = "ti,tps65218-ldo1";
|
||||
regulator-name = "v1_8d";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
@ -32,7 +32,7 @@ vmmcsd_fixed: fixedregulator-sd {
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -67,7 +67,7 @@ lcd_in: endpoint {
|
||||
};
|
||||
};
|
||||
|
||||
matrix_keypad: matrix_keypad@0 {
|
||||
matrix_keypad: matrix_keypad0 {
|
||||
compatible = "gpio-matrix-keypad";
|
||||
debounce-delay-ms = <5>;
|
||||
col-scan-delay-us = <2>;
|
||||
@ -421,7 +421,6 @@ tps65218: tps65218@24 {
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
dcdc1: regulator-dcdc1 {
|
||||
compatible = "ti,tps65218-dcdc1";
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1144000>;
|
||||
@ -430,7 +429,6 @@ dcdc1: regulator-dcdc1 {
|
||||
};
|
||||
|
||||
dcdc2: regulator-dcdc2 {
|
||||
compatible = "ti,tps65218-dcdc2";
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <1378000>;
|
||||
@ -439,7 +437,6 @@ dcdc2: regulator-dcdc2 {
|
||||
};
|
||||
|
||||
dcdc3: regulator-dcdc3 {
|
||||
compatible = "ti,tps65218-dcdc3";
|
||||
regulator-name = "vdcdc3";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
@ -448,7 +445,6 @@ dcdc3: regulator-dcdc3 {
|
||||
};
|
||||
|
||||
dcdc4: regulator-dcdc4 {
|
||||
compatible = "ti,tps65218-dcdc4";
|
||||
regulator-name = "vdcdc4";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
@ -457,21 +453,18 @@ dcdc4: regulator-dcdc4 {
|
||||
};
|
||||
|
||||
dcdc5: regulator-dcdc5 {
|
||||
compatible = "ti,tps65218-dcdc5";
|
||||
regulator-name = "v1_0bat";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
dcdc6: regulator-dcdc6 {
|
||||
compatible = "ti,tps65218-dcdc6";
|
||||
regulator-name = "v1_8bat";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
ldo1: regulator-ldo1 {
|
||||
compatible = "ti,tps65218-ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
|
||||
@ -18,7 +18,7 @@ / {
|
||||
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
|
||||
"ti,dra7";
|
||||
|
||||
memory {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
@ -23,7 +23,7 @@ aliases {
|
||||
display0 = &hdmi0;
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
@ -62,28 +62,28 @@ leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins_default>;
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "beagle-x15:usr0";
|
||||
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "beagle-x15:usr1";
|
||||
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "beagle-x15:usr2";
|
||||
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "beagle-x15:usr3";
|
||||
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
|
||||
@ -19,7 +19,7 @@ / {
|
||||
model = "CompuLab CL-SOM-AM57x";
|
||||
compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
|
||||
|
||||
memory {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
|
||||
};
|
||||
@ -29,7 +29,7 @@ leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins_default>;
|
||||
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "cl-som-am57x:green";
|
||||
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
|
||||
@ -304,3 +304,52 @@ &mmc2 {
|
||||
ti,non-removable;
|
||||
max-frequency = <96000000>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
spi-max-frequency = <76800000>;
|
||||
m25p80@0 {
|
||||
compatible = "s25fl256s1", "jedec,spi-nor";
|
||||
spi-max-frequency = <76800000>;
|
||||
reg = <0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* MTD partition table.
|
||||
* The ROM checks the first four physical blocks
|
||||
* for a valid file to boot and the flash here is
|
||||
* 64KiB block size.
|
||||
*/
|
||||
partition@0 {
|
||||
label = "QSPI.SPL";
|
||||
reg = <0x00000000 0x000040000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "QSPI.u-boot";
|
||||
reg = <0x00040000 0x00100000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "QSPI.u-boot-spl-os";
|
||||
reg = <0x00140000 0x00080000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "QSPI.u-boot-env";
|
||||
reg = <0x001c0000 0x00010000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "QSPI.u-boot-env.backup1";
|
||||
reg = <0x001d0000 0x0010000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "QSPI.kernel";
|
||||
reg = <0x001e0000 0x0800000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "QSPI.file-system";
|
||||
reg = <0x009e0000 0x01620000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -136,7 +136,7 @@ nand_cs3@62000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_cs3_pins>;
|
||||
};
|
||||
vbat: fixedregulator@0 {
|
||||
vbat: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbat";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
|
||||
@ -12,13 +12,13 @@ / {
|
||||
model = "DM8148 EVM";
|
||||
compatible = "ti,dm8148-evm", "ti,dm8148";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
/* MIC94060YC6 controlled by SD1_POW pin */
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -11,7 +11,7 @@ / {
|
||||
model = "HP t410 Smart Zero Client";
|
||||
compatible = "hp,t410", "ti,dm8148";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
@ -27,7 +27,7 @@ usb_power: regulator@9 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -7,11 +7,11 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/dm814x.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,dm814";
|
||||
interrupt-parent = <&intc>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
|
||||
@ -12,14 +12,14 @@ / {
|
||||
model = "DM8168 EVM";
|
||||
compatible = "ti,dm8168-evm", "ti,dm8168";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000 /* 1 GB */
|
||||
0xc0000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
/* FDC6331L controlled by SD_POW pin */
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -7,11 +7,11 @@
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,dm816";
|
||||
interrupt-parent = <&intc>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
|
||||
@ -12,13 +12,13 @@ / {
|
||||
model = "DRA62x J5 Eco EVM";
|
||||
compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
/* MIC94060YC6 controlled by SD1_POW pin */
|
||||
vmmcsd_fixed: fixedregulator@0 {
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
@ -16,7 +16,7 @@ / {
|
||||
model = "TI DRA742";
|
||||
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
|
||||
|
||||
memory {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
|
||||
};
|
||||
@ -105,25 +105,25 @@ simple-audio-card,codec {
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led@0 {
|
||||
led0 {
|
||||
label = "dra7:usr1";
|
||||
gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "dra7:usr2";
|
||||
gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "dra7:usr3";
|
||||
gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "dra7:usr4";
|
||||
gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
@ -664,10 +664,10 @@ &cpu0 {
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
spi-max-frequency = <64000000>;
|
||||
spi-max-frequency = <76800000>;
|
||||
m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
spi-max-frequency = <64000000>;
|
||||
spi-max-frequency = <76800000>;
|
||||
reg = <0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
@ -10,8 +10,6 @@
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/dra.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
#define MAX_SOURCES 400
|
||||
|
||||
/ {
|
||||
@ -301,6 +299,7 @@ pcie1: pcie@51000000 {
|
||||
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
|
||||
#interrupt-cells = <1>;
|
||||
num-lanes = <1>;
|
||||
linux,pci-domain = <0>;
|
||||
ti,hwmods = "pcie1";
|
||||
phys = <&pcie1_phy>;
|
||||
phy-names = "pcie-phy0";
|
||||
@ -336,6 +335,7 @@ pcie@51800000 {
|
||||
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
|
||||
#interrupt-cells = <1>;
|
||||
num-lanes = <1>;
|
||||
linux,pci-domain = <1>;
|
||||
ti,hwmods = "pcie2";
|
||||
phys = <&pcie2_phy>;
|
||||
phy-names = "pcie-phy0";
|
||||
@ -1413,7 +1413,7 @@ ocp2scp@4a080000 {
|
||||
ti,hwmods = "ocp2scp1";
|
||||
|
||||
usb2_phy1: phy@4a084000 {
|
||||
compatible = "ti,omap-usb2";
|
||||
compatible = "ti,dra7x-usb2", "ti,omap-usb2";
|
||||
reg = <0x4a084000 0x400>;
|
||||
syscon-phy-power = <&scm_conf 0x300>;
|
||||
clocks = <&usb_phy1_always_on_clk32k>,
|
||||
@ -1717,7 +1717,7 @@ crossbar_mpu: crossbar@4a002a48 {
|
||||
mac: ethernet@48484000 {
|
||||
compatible = "ti,dra7-cpsw","ti,cpsw";
|
||||
ti,hwmods = "gmac";
|
||||
clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
|
||||
clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
|
||||
clock-names = "fck", "cpts";
|
||||
cpdma_channels = <8>;
|
||||
ale_entries = <1024>;
|
||||
@ -1726,7 +1726,7 @@ mac: ethernet@48484000 {
|
||||
mac_control = <0x20>;
|
||||
slaves = <2>;
|
||||
active_slave = <0>;
|
||||
cpts_clock_mult = <0x80000000>;
|
||||
cpts_clock_mult = <0x784CFE14>;
|
||||
cpts_clock_shift = <29>;
|
||||
reg = <0x48484000 0x1000
|
||||
0x48485200 0x2E00>;
|
||||
|
||||
@ -681,10 +681,10 @@ &dcan1 {
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
spi-max-frequency = <64000000>;
|
||||
spi-max-frequency = <76800000>;
|
||||
m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
spi-max-frequency = <64000000>;
|
||||
spi-max-frequency = <76800000>;
|
||||
reg = <0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
@ -11,7 +11,7 @@
|
||||
/ {
|
||||
model = "TI DRA722 Rev C EVM";
|
||||
|
||||
memory {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
|
||||
};
|
||||
|
||||
@ -9,7 +9,7 @@
|
||||
/ {
|
||||
model = "TI DRA722";
|
||||
|
||||
memory {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
|
||||
};
|
||||
|
||||
@ -1003,6 +1003,14 @@ gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
|
||||
ti,index-power-of-two;
|
||||
};
|
||||
|
||||
gmac_main_clk: gmac_main_clk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&gmac_250m_dclk_div>;
|
||||
clock-mult = <1>;
|
||||
clock-div = <2>;
|
||||
};
|
||||
|
||||
l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,divider-clock";
|
||||
@ -1718,13 +1726,12 @@ atl_gfclk_mux: atl_gfclk_mux@c00 {
|
||||
reg = <0x0c00>;
|
||||
};
|
||||
|
||||
gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 {
|
||||
rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "ti,divider-clock";
|
||||
clocks = <&dpll_gmac_m2_ck>;
|
||||
compatible = "ti,mux-clock";
|
||||
clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
|
||||
ti,bit-shift = <24>;
|
||||
reg = <0x13d0>;
|
||||
ti,dividers = <2>;
|
||||
};
|
||||
|
||||
gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
|
||||
|
||||
@ -35,10 +35,15 @@ &gpmc {
|
||||
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
|
||||
|
||||
nand@0,0 {
|
||||
linux,mtd-name = "micron,mt29f4g16abbda3w";
|
||||
compatible = "ti,omap2-nand";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
interrupt-parent = <&gpmc>;
|
||||
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||||
<1 IRQ_TYPE_NONE>; /* termcount */
|
||||
linux,mtd-name = "micron,mt29f4g16abbda3w";
|
||||
nand-bus-width = <16>;
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
@ -54,10 +59,6 @@ nand@0,0 {
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
gpmc,device-width = <2>;
|
||||
|
||||
gpmc,page-burst-access-ns = <5>;
|
||||
gpmc,cycle2cycle-delay-ns = <50>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
|
||||
@ -13,6 +13,11 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
user0 {
|
||||
@ -46,6 +51,7 @@ nand@0,0 {
|
||||
linux,mtd-name = "micron,mt29f4g16abbda3w";
|
||||
nand-bus-width = <16>;
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
|
||||
@ -12,11 +12,11 @@
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
|
||||
interrupt-parent = <&intc>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "TI OMAP2420 H4 board";
|
||||
compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x4000000>; /* 64 MB */
|
||||
};
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
#include "omap2420.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "TI OMAP2430 SDP";
|
||||
compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
@ -19,7 +19,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -19,7 +19,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
/ {
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -10,7 +10,7 @@
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
/ {
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -15,7 +15,7 @@ / {
|
||||
model = "TI OMAP37XX EVM (TMDSEVM3730)";
|
||||
compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -14,7 +14,7 @@ / {
|
||||
model = "TI OMAP35XX EVM (TMDSEVM3530)";
|
||||
compatible = "ti,omap3-evm", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -21,7 +21,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -13,7 +13,7 @@
|
||||
#include "omap36xx.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -15,7 +15,7 @@ / {
|
||||
model = "TI OMAP3430 LDP (Zoom1 Labrador)";
|
||||
compatible = "ti,omap3-ldp", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
@ -17,7 +17,7 @@ chosen {
|
||||
bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
@ -54,7 +54,7 @@ heartbeat {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -24,12 +24,12 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
vemmc: fixedregulator@0 {
|
||||
vemmc: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VEMMC";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
@ -39,7 +39,7 @@ vemmc: fixedregulator@0 {
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vwlan_fixed: fixedregulator@2 {
|
||||
vwlan_fixed: fixedregulator2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VWLAN";
|
||||
gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
|
||||
|
||||
@ -44,7 +44,7 @@ gpio_keys {
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
button0@10 {
|
||||
button0 {
|
||||
label = "button0";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
|
||||
|
||||
@ -11,6 +11,12 @@
|
||||
*/
|
||||
|
||||
/ {
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0>;
|
||||
};
|
||||
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
@ -223,7 +229,9 @@ &mcbsp2 {
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x00000000 0x20000000>;
|
||||
ranges = <0 0 0x30000000 0x1000000>, /* CS0 */
|
||||
<4 0 0x2b000000 0x1000000>, /* CS4 */
|
||||
<5 0 0x2c000000 0x1000000>; /* CS5 */
|
||||
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
|
||||
@ -37,13 +37,13 @@ gpio_keys {
|
||||
pinctrl-0 = <&button_pins>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
button0@23 {
|
||||
button0 {
|
||||
label = "button0";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
|
||||
wakeup-source;
|
||||
};
|
||||
button1@14 {
|
||||
button1 {
|
||||
label = "button1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
|
||||
@ -55,8 +55,6 @@ button1@14 {
|
||||
#include "omap-gpmc-smsc9221.dtsi"
|
||||
|
||||
&gpmc {
|
||||
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
|
||||
|
||||
ethernet@gpmc {
|
||||
reg = <5 0 0xff>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
|
||||
@ -119,7 +119,7 @@ &mcspi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi1_pins>;
|
||||
|
||||
lcd0: display {
|
||||
lcd0: display@1 {
|
||||
compatible = "lgphilips,lb035q02";
|
||||
label = "lcd35";
|
||||
|
||||
|
||||
@ -37,13 +37,13 @@ gpio_keys {
|
||||
pinctrl-0 = <&button_pins>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
button0@23 {
|
||||
button0 {
|
||||
label = "button0";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
|
||||
wakeup-source;
|
||||
};
|
||||
button1@14 {
|
||||
button1 {
|
||||
label = "button1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
|
||||
|
||||
@ -37,13 +37,13 @@ gpio_keys {
|
||||
pinctrl-0 = <&button_pins>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
button0@23 {
|
||||
button0 {
|
||||
label = "button0";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
|
||||
wakeup-source;
|
||||
};
|
||||
button1@14 {
|
||||
button1 {
|
||||
label = "button1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
|
||||
|
||||
@ -37,13 +37,13 @@ gpio_keys {
|
||||
pinctrl-0 = <&button_pins>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
button0@23 {
|
||||
button0 {
|
||||
label = "button0";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
|
||||
wakeup-source;
|
||||
};
|
||||
button1@14 {
|
||||
button1 {
|
||||
label = "button1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
|
||||
|
||||
@ -27,8 +27,6 @@ heartbeat {
|
||||
#include "omap-gpmc-smsc9221.dtsi"
|
||||
|
||||
&gpmc {
|
||||
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
|
||||
|
||||
ethernet@gpmc {
|
||||
reg = <5 0 0xff>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
|
||||
@ -15,9 +15,6 @@
|
||||
#include "omap-gpmc-smsc9221.dtsi"
|
||||
|
||||
&gpmc {
|
||||
ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */
|
||||
<5 0 0x2c000000 0x1000000>; /* CS5 */
|
||||
|
||||
smsc1: ethernet@gpmc {
|
||||
reg = <5 0 0xff>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
|
||||
@ -18,7 +18,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
@ -45,28 +45,28 @@ gpio-leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "pandora::sd1";
|
||||
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
led2 {
|
||||
label = "pandora::sd2";
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
|
||||
linux,default-trigger = "mmc1";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
led3 {
|
||||
label = "pandora::bluetooth";
|
||||
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
led4 {
|
||||
label = "pandora::wifi";
|
||||
gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
|
||||
linux,default-trigger = "mmc2";
|
||||
|
||||
@ -20,7 +20,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -26,7 +26,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -20,7 +20,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -12,11 +12,11 @@
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,omap3430", "ti,omap3";
|
||||
interrupt-parent = <&intc>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
@ -78,7 +78,7 @@ dsp {
|
||||
* the moment, just use a fake OCP bus entry to represent the whole bus
|
||||
* hierarchy.
|
||||
*/
|
||||
ocp {
|
||||
ocp@68000000 {
|
||||
compatible = "ti,omap3-l3-smx", "simple-bus";
|
||||
reg = <0x68000000 0x10000>;
|
||||
interrupts = <9 10>;
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "TI OMAP3430 SDP";
|
||||
compatible = "ti,omap3430-sdp", "ti,omap3";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
@ -28,7 +28,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
ocp {
|
||||
ocp@68000000 {
|
||||
omap3_pmx_core2: pinmux@480025d8 {
|
||||
compatible = "ti,omap3-padconf", "pinctrl-single";
|
||||
reg = <0x480025d8 0x24>;
|
||||
|
||||
@ -30,7 +30,7 @@ cpu@0 {
|
||||
};
|
||||
};
|
||||
|
||||
ocp {
|
||||
ocp@68000000 {
|
||||
uart4: serial@49042000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
reg = <0x49042000 0x400>;
|
||||
|
||||
@ -32,7 +32,7 @@ gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
button0@121 {
|
||||
button0 {
|
||||
label = "button0";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
|
||||
|
||||
@ -12,7 +12,7 @@ / {
|
||||
model = "Gumstix Duovero";
|
||||
compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "Amazon Kindle Fire (first generation)";
|
||||
compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include "elpida_ecb240abacn.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
@ -14,7 +14,7 @@ / {
|
||||
model = "TI OMAP4 SDP board";
|
||||
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
@ -12,7 +12,7 @@ / {
|
||||
model = "Variscite VAR-SOM-OM44";
|
||||
compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
@ -10,11 +10,11 @@
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,omap4430", "ti,omap4";
|
||||
interrupt-parent = <&wakeupgen>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
|
||||
@ -79,7 +79,7 @@ hsusb3_phy: hsusb3_phy {
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "omap5:blue:usr1";
|
||||
gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
|
||||
linux,default-trigger = "heartbeat";
|
||||
|
||||
@ -11,7 +11,7 @@ / {
|
||||
model = "CompuLab CM-T54";
|
||||
compatible = "compulab,omap5-cm-t54", "ti,omap5";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x7F000000>; /* 2048 MB */
|
||||
};
|
||||
@ -72,7 +72,7 @@ hsusb3_phy: hsusb3_phy {
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led@1 {
|
||||
led1 {
|
||||
label = "Heartbeat";
|
||||
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
|
||||
linux,default-trigger = "heartbeat";
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "IGEPv5";
|
||||
compatible = "isee,omap5-igep0050", "ti,omap5";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x7f000000>; /* 2032 MB */
|
||||
};
|
||||
|
||||
@ -13,7 +13,7 @@ / {
|
||||
model = "TI OMAP5 uEVM board";
|
||||
compatible = "ti,omap5-uevm", "ti,omap5";
|
||||
|
||||
memory {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x7F000000>; /* 2032 MB */
|
||||
};
|
||||
|
||||
@ -11,8 +11,6 @@
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user