A lot of test_sysctl sub-tests fail due to handling strings as a bunch
of immediate values in a little-endian-specific manner.
Fix by wrapping all immediates in bpf_ntohl and the new bpf_be64_to_cpu.
fixup_sysctl_value() dynamically writes an immediate, and thus should be
endianness-aware. Implement this by simply memcpy()ing the raw
user-provided value, since testcase endianness and bpf program
endianness match.
Fixes: 1f5fa9ab6e ("selftests/bpf: Test BPF_CGROUP_SYSCTL")
Fixes: 9a1027e525 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx")
Fixes: 6041c67f28 ("selftests/bpf: Test bpf_sysctl_get_name helper")
Fixes: 11ff34f74e ("selftests/bpf: Test sysctl_get_current_value helper")
Fixes: 786047dd08 ("selftests/bpf: Test bpf_sysctl_{get,set}_new_value helpers")
Fixes: 8549ddc832 ("selftests/bpf: Test bpf_strtol and bpf_strtoul helpers")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When tests fail because sysctl() unexpectedly succeeds, they print an
inappropriate "Unexpected failure" message and a random errno. Zero
out errno before calling sysctl() and replace the message with
"Unexpected success".
Fixes: 1f5fa9ab6e ("selftests/bpf: Test BPF_CGROUP_SYSCTL")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
"ctx:write sysctl:write read ok" fails on s390 because it reads the
first byte of an int assuming it's the least-significant one, which
is not the case on big-endian arches. Since we are not testing narrow
accesses here (there is e.g. "ctx:file_pos sysctl:read read ok narrow"
for that), simply read the whole int.
Fixes: 1f5fa9ab6e ("selftests/bpf: Test BPF_CGROUP_SYSCTL")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_lwt_seg6local and test_seg6_loop use custom 64-bit endianness
conversion macros. Centralize their definitions in bpf_endian.h in order
to reduce code duplication. This will also be useful when bpf_endian.h
is promoted to an offical libbpf header.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Optimize modulo operation instruction generation by
using single MSUB instruction vs MUL followed by SUB
instruction scheme.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds support for generating bpf line info for JITed programs
like commit 6f20c71d85 ("bpf: powerpc64: add JIT support for bpf
line info") does for powerpc, but it should pass the array starting
from 1. This fixes test_btf.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Copy-paste error from CHECK.
Fixes: d38835b75f ("selftests/bpf: test_progs: remove global fail/success counts")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fseeko(.., 0, SEEK_SET) on a memstream just puts the buffer pointer
to the beginning so when we call fflush on it we get some garbage
log data from the previous test. Let's manually set terminating
byte to zero at the reported buffer size.
To show the issue consider the following snippet:
stream = open_memstream (&buf, &len);
fprintf(stream, "aaa");
fflush(stream);
printf("buf=%s, len=%zu\n", buf, len);
fseeko(stream, 0, SEEK_SET);
fprintf(stream, "b");
fflush(stream);
printf("buf=%s, len=%zu\n", buf, len);
Output:
buf=aaa, len=3
buf=baa, len=1
Fixes: 946152b3c5 ("selftests/bpf: test_progs: switch to open_memstream")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Kevin Laatz says:
====================
This patch set adds the ability to use unaligned chunks in the XDP umem.
Currently, all chunk addresses passed to the umem are masked to be chunk
size aligned (max is PAGE_SIZE). This limits where we can place chunks
within the umem as well as limiting the packet sizes that are supported.
The changes in this patch set removes these restrictions, allowing XDP to
be more flexible in where it can place a chunk within a umem. By relaxing
where the chunks can be placed, it allows us to use an arbitrary buffer
size and place that wherever we have a free address in the umem. These
changes add the ability to support arbitrary frame sizes up to 4k
(PAGE_SIZE) and make it easy to integrate with other existing frameworks
that have their own memory management systems, such as DPDK.
In DPDK, for example, there is already support for AF_XDP with zero-copy.
However, with this patch set the integration will be much more seamless.
You can find the DPDK AF_XDP driver at:
https://git.dpdk.org/dpdk/tree/drivers/net/af_xdp
Since we are now dealing with arbitrary frame sizes, we need also need to
update how we pass around addresses. Currently, the addresses can simply be
masked to 2k to get back to the original address. This becomes less trivial
when using frame sizes that are not a 'power of 2' size. This patch set
modifies the Rx/Tx descriptor format to use the upper 16-bits of the addr
field for an offset value, leaving the lower 48-bits for the address (this
leaves us with 256 Terabytes, which should be enough!). We only need to use
the upper 16-bits to store the offset when running in unaligned mode.
Rather than adding the offset (headroom etc) to the address, we will store
it in the upper 16-bits of the address field. This way, we can easily add
the offset to the address where we need it, using some bit manipulation and
addition, and we can also easily get the original address wherever we need
it (for example in i40e_zca_free) by simply masking to get the lower
48-bits of the address field.
The patch set was tested with the following set up:
- Intel(R) Xeon(R) Gold 6140 CPU @ 2.30GHz
- Intel Corporation Ethernet Controller XXV710 for 25GbE SFP28 (rev 02)
- Driver: i40e
- Application: xdpsock with l2fwd (single interface)
- Turbo disabled in BIOS
There are no changes to performance before and after these patches for SKB
mode and Copy mode. Zero-copy mode saw a performance degradation of ~1.5%.
This patch set has been applied against
commit 0bb52b0dfc ("tools: bpftool: add 'bpftool map freeze' subcommand")
Structure of the patch set:
Patch 1:
- Remove unnecessary masking and headroom addition during zero-copy Rx
buffer recycling in i40e. This change is required in order for the
buffer recycling to work in the unaligned chunk mode.
Patch 2:
- Remove unnecessary masking and headroom addition during
zero-copy Rx buffer recycling in ixgbe. This change is required in
order for the buffer recycling to work in the unaligned chunk mode.
Patch 3:
- Add infrastructure for unaligned chunks. Since we are dealing with
unaligned chunks that could potentially cross a physical page boundary,
we add checks to keep track of that information. We can later use this
information to correctly handle buffers that are placed at an address
where they cross a page boundary. This patch also modifies the
existing Rx and Tx functions to use the new descriptor format. To
handle addresses correctly, we need to mask appropriately based on
whether we are in aligned or unaligned mode.
Patch 4:
- This patch updates the i40e driver to make use of the new descriptor
format.
Patch 5:
- This patch updates the ixgbe driver to make use of the new descriptor
format.
Patch 6:
- This patch updates the mlx5e driver to make use of the new descriptor
format. These changes are required to handle the new descriptor format
and for unaligned chunks support.
Patch 7:
- This patch allows XSK frames smaller than page size in the mlx5e
driver. Relax the requirements to the XSK frame size to allow it to be
smaller than a page and even not a power of two. The current
implementation can work in this mode, both with Striding RQ and without
it.
Patch 8:
- Add flags for umem configuration to libbpf. Since we increase the size
of the struct by adding flags, we also need to add the ABI versioning
in this patch.
Patch 9:
- Modify xdpsock application to add a command line option for
unaligned chunks
Patch 10:
- Since we can now run the application in unaligned chunk mode, we need
to make sure we recycle the buffers appropriately.
Patch 11:
- Adds hugepage support to the xdpsock application
Patch 12:
- Documentation update to include the unaligned chunk scenario. We need
to explicitly state that the incoming addresses are only masked in the
aligned chunk mode and not the unaligned chunk mode.
v2:
- fixed checkpatch issues
- fixed Rx buffer recycling for unaligned chunks in xdpsock
- removed unused defines
- fixed how chunk_size is calculated in xsk_diag.c
- added some performance numbers to cover letter
- modified descriptor format to make it easier to retrieve original
address
- removed patch adding off_t off to the zero copy allocator. This is no
longer needed with the new descriptor format.
v3:
- added patch for mlx5 driver changes needed for unaligned chunks
- moved offset handling to new helper function
- changed value used for the umem chunk_mask. Now using the new
descriptor format to save us doing the calculations in a number of
places meaning more of the code is left unchanged while adding
unaligned chunk support.
v4:
- reworked the next_pg_contig field in the xdp_umem_page struct. We now
use the low 12 bits of the addr for flags rather than adding an extra
field in the struct.
- modified unaligned chunks flag define
- fixed page_start calculation in __xsk_rcv_memcpy().
- move offset handling to the xdp_umem_get_* functions
- modified the len field in xdp_umem_reg struct. We now use 16 bits from
this for the flags field.
- fixed headroom addition to handle in the mlx5e driver
- other minor changes based on review comments
v5:
- Added ABI versioning in the libbpf patch
- Removed bitfields in the xdp_umem_reg struct. Adding new flags field.
- Added accessors for getting addr and offset.
- Added helper function for adding the offset to the addr.
- Fixed conflicts with 'bpf-af-xdp-wakeup' which was merged recently.
- Fixed typo in mlx driver patch.
- Moved libbpf patch to later in the set (7/11, just before the sample
app changes)
v6:
- Added support for XSK frames smaller than page in mlx5e driver (Maxim
Mikityanskiy <maximmi@mellanox.com).
- Fixed offset handling in xsk_generic_rcv.
- Added check for base address in xskq_is_valid_addr_unaligned.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The addition of unaligned chunks mode, the documentation needs to be
updated to indicate that the incoming addr to the fill ring will only be
masked if the user application is run in the aligned chunk mode. This patch
also adds a line to explicitly indicate that the incoming addr will not be
masked if running the user application in the unaligned chunk mode.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch modifies xdpsock to use mmap instead of posix_memalign. With
this change, we can use hugepages when running the application in unaligned
chunks mode. Using hugepages makes it more likely that we have physically
contiguous memory, which supports the unaligned chunk mode better.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds buffer recycling support for unaligned buffers. Since we
don't mask the addr to 2k at umem_reg in unaligned mode, we need to make
sure we give back the correct (original) addr to the fill queue. We achieve
this using the new descriptor format and associated masks. The new format
uses the upper 16-bits for the offset and the lower 48-bits for the addr.
Since we have a field for the offset, we no longer need to modify the
actual address. As such, all we have to do to get back the original address
is mask for the lower 48 bits (i.e. strip the offset and we get the address
on it's own).
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support for the unaligned chunks mode. The addition of the
unaligned chunks option will allow users to run the application with more
relaxed chunk placement in the XDP umem.
Unaligned chunks mode can be used with the '-u' or '--unaligned' command
line options.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a 'flags' field to the umem_config and umem_reg structs.
This will allow for more options to be added for configuring umems.
The first use for the flags field is to add a flag for unaligned chunks
mode. These flags can either be user-provided or filled with a default.
Since we change the size of the xsk_umem_config struct, we need to version
the ABI. This patch includes the ABI versioning for xsk_umem__create. The
Makefile was also updated to handle multiple function versions in
check-abi.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Relax the requirements to the XSK frame size to allow it to be smaller
than a page and even not a power of two. The current implementation can
work in this mode, both with Striding RQ and without it.
The code that checks `mtu + headroom <= XSK frame size` is modified
accordingly. Any frame size between 2048 and PAGE_SIZE is accepted.
Functions that worked with pages only now work with XSK frames, even if
their size is different from PAGE_SIZE.
With XSK queues, regardless of the frame size, Striding RQ uses the
stride size of PAGE_SIZE, and UMR MTTs are posted using starting
addresses of frames, but PAGE_SIZE as page size. MTU guarantees that no
packet data will overlap with other frames. UMR MTT size is made equal
to the stride size of the RQ, because UMEM frames may come in random
order, and we need to handle them one by one. PAGE_SIZE is just a power
of two that is bigger than any allowed XSK frame size, and also it
doesn't require making additional changes to the code.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With the addition of the unaligned chunks option, we need to make sure we
handle the offsets accordingly based on the mode we are currently running
in. This patch modifies the driver to appropriately mask the address for
each case.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With the addition of the unaligned chunks option, we need to make sure we
handle the offsets accordingly based on the mode we are currently running
in. This patch modifies the driver to appropriately mask the address for
each case.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With the addition of the unaligned chunks option, we need to make sure we
handle the offsets accordingly based on the mode we are currently running
in. This patch modifies the driver to appropriately mask the address for
each case.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, addresses are chunk size aligned. This means, we are very
restricted in terms of where we can place chunk within the umem. For
example, if we have a chunk size of 2k, then our chunks can only be placed
at 0,2k,4k,6k,8k... and so on (ie. every 2k starting from 0).
This patch introduces the ability to use unaligned chunks. With these
changes, we are no longer bound to having to place chunks at a 2k (or
whatever your chunk size is) interval. Since we are no longer dealing with
aligned chunks, they can now cross page boundaries. Checks for page
contiguity have been added in order to keep track of which pages are
followed by a physically contiguous page.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, the dma, addr and handle are modified when we reuse Rx buffers
in zero-copy mode. However, this is not required as the inputs to the
function are copies, not the original values themselves. As we use the
copies within the function, we can use the original 'obi' values
directly without having to mask and add the headroom.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, the dma, addr and handle are modified when we reuse Rx buffers
in zero-copy mode. However, this is not required as the inputs to the
function are copies, not the original values themselves. As we use the
copies within the function, we can use the original 'old_bi' values
directly without having to mask and add the headroom.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch fix a spelling typo in test_offload.py
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If a SYN cookie is not issued by tcp_v#_gen_syncookie, then the return
value will be exactly 0, rather than <= 0. Let's change the check to
reflect that, especially since mss is an unsigned value and cannot be
negative.
Fixes: 70d6624431 ("bpf: add bpf_tcp_gen_syncookie helper")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Petar Penkov <ppenkov@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jakub Kicinski says:
====================
This set adds a small batching and cache mechanism to the driver.
Map dumps require two operations per element - get next, and
lookup. Each of those needs a round trip to the device, and on
a loaded system scheduling out and in of the dumping process.
This set makes the driver request a number of entries at the same
time, and if no operation which would modify the map happens
from the host side those entries are used to serve lookup
requests for up to 250us, at which point they are considered
stale.
This set has been measured to provide almost 4x dumping speed
improvement, Jaco says:
OLD dump times
500 000 elements: 26.1s
1 000 000 elements: 54.5s
NEW dump times
500 000 elements: 7.6s
1 000 000 elements: 16.5s
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Each get_next and lookup call requires a round trip to the device.
However, the device is capable of giving us a few entries back,
instead of just one.
In this patch we ask for a small yet reasonable number of entries
(4) on every get_next call, and on subsequent get_next/lookup calls
check this little cache for a hit. The cache is only kept for 250us,
and is invalidated on every operation which may modify the map
(e.g. delete or update call). Note that operations may be performed
simultaneously, so we have to keep track of operations in flight.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If control channel MTU is too low to support map operations a warning
will be printed. This is not enough, we want to make sure probe fails
in such scenario, as this would clearly be a faulty configuration.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Quentin Monnet says:
====================
This set attempts to make it easier to build bpftool, in particular when
passing a specific output directory. This is a follow-up to the
conversation held last month by Lorenz, Ilya and Jakub [0].
The first patch is a minor fix to bpftool's Makefile, regarding the
retrieval of kernel version (which currently prints a non-relevant make
warning on some invocations).
Second patch improves the Makefile commands to support more "make"
invocations, or to fix building with custom output directory. On Jakub's
suggestion, a script is also added to BPF selftests in order to keep track
of the supported build variants.
Building bpftool with "make tools/bpf" from the top of the repository
generates files in "libbpf/" and "feature/" directories under tools/bpf/
and tools/bpf/bpftool/. The third patch ensures such directories are taken
care of on "make clean", and add them to the relevant .gitignore files.
At last, fourth patch is a sligthly modified version of Ilya's fix
regarding libbpf.a appearing twice on the linking command for bpftool.
[0] https://lore.kernel.org/bpf/CACAyw9-CWRHVH3TJ=Tke2x8YiLsH47sLCijdp=V+5M836R9aAA@mail.gmail.com/
v2:
- Return error from check script if one of the make invocations returns
non-zero (even if binary is successfully produced).
- Run "make clean" from bpf/ and not only bpf/bpftool/ in that same script,
when relevant.
- Add a patch to clean up generated "feature/" and "libbpf/" directories.
====================
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In bpftool's Makefile, $(LIBS) includes $(LIBBPF), therefore the library
is used twice in the linking command. No need to have $(LIBBPF) (from
$^) on that command, let's do with "$(OBJS) $(LIBS)" (but move $(LIBBPF)
_before_ the -l flags in $(LIBS)).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When building "tools/bpf" from the top of the Linux repository, the
build system passes a value for the $(OUTPUT) Makefile variable to
tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in
generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool)
directories inside the tree.
This commit adds such directories to the relevant .gitignore files, and
edits the Makefiles to ensure they are removed on "make clean". The use
of "rm" is also made consistent throughout those Makefiles (relies on
the $(RM) variable, use "--" to prevent interpreting
$(OUTPUT)/$(DESTDIR) as options.
v2:
- New patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are a number of alternative "make" invocations that can be used to
compile bpftool. The following invocations are expected to work:
- through the kbuild system, from the top of the repository
(make tools/bpf)
- by telling make to change to the bpftool directory
(make -C tools/bpf/bpftool)
- by building the BPF tools from tools/
(cd tools && make bpf)
- by running make from bpftool directory
(cd tools/bpf/bpftool && make)
Additionally, setting the O or OUTPUT variables should tell the build
system to use a custom output path, for each of these alternatives.
The following patch fixes the following invocations:
$ make tools/bpf
$ make tools/bpf O=<dir>
$ make -C tools/bpf/bpftool OUTPUT=<dir>
$ make -C tools/bpf/bpftool O=<dir>
$ cd tools/ && make bpf O=<dir>
$ cd tools/bpf/bpftool && make OUTPUT=<dir>
$ cd tools/bpf/bpftool && make O=<dir>
After this commit, the build still fails for two variants when passing
the OUTPUT variable:
$ make tools/bpf OUTPUT=<dir>
$ cd tools/ && make bpf OUTPUT=<dir>
In order to remember and check what make invocations are supposed to
work, and to document the ones which do not, a new script is added to
the BPF selftests. Note that some invocations require the kernel to be
configured, so the script skips them if no .config file is found.
v2:
- In make_and_clean(), set $ERROR to 1 when "make" returns non-zero,
even if the binary was produced.
- Run "make clean" from the correct directory (bpf/ instead of bpftool/,
when relevant).
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool calls the toplevel Makefile to get the kernel version for the
sources it is built from. But when the utility is built from the top of
the kernel repository, it may dump the following error message for
certain architectures (including x86):
$ make tools/bpf
[...]
make[3]: *** [checkbin] Error 1
[...]
This does not prevent bpftool compilation, but may feel disconcerting.
The "checkbin" arch-dependent target is not supposed to be called for
target "kernelversion", which is a simple "echo" of the version number.
It turns out this is caused by the make invocation in tools/bpf/bpftool,
which attempts to find implicit rules to apply. Extract from debug
output:
Reading makefiles...
Reading makefile 'Makefile'...
Reading makefile 'scripts/Kbuild.include' (search path) (no ~ expansion)...
Reading makefile 'scripts/subarch.include' (search path) (no ~ expansion)...
Reading makefile 'arch/x86/Makefile' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kcov' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.gcc-plugins' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kasan' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.extrawarn' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.ubsan' (search path) (no ~ expansion)...
Updating makefiles....
Considering target file 'scripts/Makefile.ubsan'.
Looking for an implicit rule for 'scripts/Makefile.ubsan'.
Trying pattern rule with stem 'Makefile.ubsan'.
[...]
Trying pattern rule with stem 'Makefile.ubsan'.
Trying implicit prerequisite 'scripts/Makefile.ubsan.o'.
Looking for a rule with intermediate file 'scripts/Makefile.ubsan.o'.
Avoiding implicit rule recursion.
Trying pattern rule with stem 'Makefile.ubsan'.
Trying rule prerequisite 'prepare'.
Trying rule prerequisite 'FORCE'.
Found an implicit rule for 'scripts/Makefile.ubsan'.
Considering target file 'prepare'.
File 'prepare' does not exist.
Considering target file 'prepare0'.
File 'prepare0' does not exist.
Considering target file 'archprepare'.
File 'archprepare' does not exist.
Considering target file 'archheaders'.
File 'archheaders' does not exist.
Finished prerequisites of target file 'archheaders'.
Must remake target 'archheaders'.
Putting child 0x55976f4f6980 (archheaders) PID 31743 on the chain.
To avoid that, pass the -r and -R flags to eliminate the use of make
built-in rules (and while at it, built-in variables) when running
command "make kernelversion" from bpftool's Makefile.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds support for bpf-to-bpf function calls in the s390 JIT
compiler. The JIT compiler converts the bpf call instructions to
native branch instructions. After a round of the usual passes, the
start addresses of the JITed images for the callee functions are
known. Finally, to fixup the branch target addresses, we need to
perform an extra pass.
Because of the address range in which JITed images are allocated on
s390, the offsets of the start addresses of these images from
__bpf_call_base are as large as 64 bits. So, for a function call,
the imm field of the instruction cannot be used to determine the
callee's address. Use bpf_jit_get_func_addr() helper instead.
The patch borrows a lot from:
commit 8c11ea5ce1 ("bpf, arm64: fix getting subprog addr from aux
for calls")
commit e2c95a6165 ("bpf, ppc64: generalize fetching subprog into
bpf_jit_get_func_addr")
commit 8484ce8306 ("bpf: powerpc64: add JIT support for
multi-function programs")
(including the commit message).
test_verifier (5.3-rc6 with CONFIG_BPF_JIT_ALWAYS_ON=y):
without patch:
Summary: 1501 PASSED, 0 SKIPPED, 47 FAILED
with patch:
Summary: 1540 PASSED, 0 SKIPPED, 8 FAILED
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
.nhoff = 0 is (correctly) reset to ETH_HLEN on the next line so let's
drop it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev says:
====================
* add test__skip to indicate skipped tests
* remove global success/error counts (use environment)
* remove asserts from the tests
* remove unused ret from send_signal test
v3:
* QCHECK -> CHECK_FAIL (Daniel Borkmann)
v2:
* drop patch that changes output to keep consistent with test_verifier
(Alexei Starovoitov)
* QCHECK instead of test__fail (Andrii Nakryiko)
* test__skip count number of subtests (Andrii Nakryiko)
====================
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
send_signal test returns static codes from the subtests which
nobody looks at, let's rely on the CHECK macros instead.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Otherwise they can bring the whole process down.
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we have a global per-test/per-environment state, there
is no longer need to have global fail/success counters (and there
is no need to save/get the diff before/after the test).
Introduce CHECK_FAIL macro (suggested by Andrii) and covert existing tests
to it. CHECK_FAIL uses new test__fail() to record the failure.
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Export test__skip() to indicate skipped tests and use it in
test_send_signal_nmi().
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov says:
====================
Add few additional tests for precision tracking in the verifier.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Copy-paste of existing test
"calls: cross frame pruning - liveness propagation"
but ran with different parentage chain heuristic
which stresses different path in precision tracking logic.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use BPF_F_TEST_STATE_FREQ flag to check that precision
tracking works as expected by comparing every step it takes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
sync bpf.h from kernel/ to tools/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Introduce BPF_F_TEST_STATE_FREQ flag to stress test parentage chain
and state pruning.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a new subcommand to freeze maps from user space.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When listing maps, read their "frozen" status from procfs, and tell if
maps are frozen.
As commit log for map freezing command mentions that the feature might
be extended with flags (e.g. for write-only instead of read-only) in the
future, use an integer and not a boolean for JSON output.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
I opened /sys/kernel/tracing/trace once and kept reading from it.
bpf_trace_printk somehow did not seem to work, no entries were appended
to that trace file. It turns out that tracing is disabled when that file
is open. Save the next person some time and document this.
The trace file is described in Documentation/trace/ftrace.rst, however
the implication "tracing is disabled" did not immediate translate to
"bpf_trace_printk silently discards entries".
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no 'struct pt_reg'.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
PERF_EVENT_IOC_SET_BPF supports uprobes since v4.3, and tracepoints
since v4.7 via commit 04a22fae4c ("tracing, perf: Implement BPF
programs attached to uprobes"), and commit 98b5c2c65c ("perf, bpf:
allow bpf programs attach to tracepoints") respectively.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Building s390 kernel with CONFIG_DEBUG_INFO_BTF fails, because
CONFIG_OUTPUT_FORMAT is not defined. As a matter of fact, this variable
appears to be x86-only, so other arches might be affected as well.
Fix by obtaining this value from objdump output, just like it's already
done for bin_arch. The exact objdump invocation is "inspired" by
arch/powerpc/boot/wrapper.
Also, use LANG=C for the existing bin_arch objdump invocation to avoid
potential build issues on systems with non-English locale.
Fixes: 341dfcf8d7 ("btf: expose BTF info through sysfs")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
