If we stop filling the ELSP due to an incompatible virtual engine
request, check if we should enable the timeslice on behalf of the queue.
This fixes the case where we are inspecting the last->next element when
we know that the last element is the last request in the execution queue,
and so decided we did not need to enable timeslicing despite the intent
to do so!
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306113012.3184606-1-chris@chris-wilson.co.uk
Due to the ordering of cmpxchg()/dma_fence_signal() inside node_retire(),
we must also use the xchg() as our primary memory barrier to flush the
outstanding callbacks after expected completion of the i915_active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306133852.3420322-1-chris@chris-wilson.co.uk
This workaround is to disable FF DOP Clock gating. The fix
in B0 was backed out due to timing reasons and decided to
be made permanent.
Bspec: 52890
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305181204.28856-1-swathi.dhanavanthri@intel.com
On some platforms such as Elkhart Lake, although we may use DDI D
to drive a connector, we have to use PHY A (Combo Phy PORT A) to
detect the hotplug interrupts as per the spec because there is no
one-to-one mapping between DDIs and PHYs. Therefore, use the
function intel_port_to_phy() which contains the logic for such
mapping(s) to find the correct hpd_pin.
This change should not affect other platforms as there is always
a one-to-one mapping between DDIs and PHYs.
v2:
- Convert the case statements to use PHYs instead of PORTs (Jani)
v3:
- Refactor the function to reduce the number of return statements by
lumping all the case statements together except PHY_F which needs
special handling (Jose)
v4:
- Add a comment describing how the HPD pin value associated with any
port can be retrieved using port or phy enum value. (Jani)
v5:
- Use case ranges instead of individual labels and also normalize the
return statement by adding -PHY_A to the expression (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304234240.12062-1-vivek.kasireddy@intel.com
Depending on RNG we might try to fill an 8G region for every possible
order, using the smallest possible chunk size of 4K, which seems to be
very slow. Try to remedy the situation by adding an overall timeout for
the test, while also selecting each order level in a random fashion.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1310
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305204711.217783-2-matthew.auld@intel.com
Check the edge case where batch_start_offset sits exactly on the batch
size.
v2: add new range_overflows variant to capture the special case where
the size is permitted to be zero, like with batch_len.
v3: other way around. the common case is the exclusive one which should
just be >=, with that we then just need to convert the three odd ball
cases that don't apply to use the new inclusive _end version.
Testcase: igt/gem_exec_params/invalid-batch-start-offset
Fixes: 0b5372727b ("drm/i915/cmdparser: Use cached vmappings")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306094735.258285-1-matthew.auld@intel.com
We only need to serialise the multiple pinning during the eb_reserve
phase. Ideally this would be using the vm->mutex as an outer lock, or
using a composite global mutex (ww_mutex), but at the moment we are
using struct_mutex for the group.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1381
Fixes: 003d8b9143 ("drm/i915/gem: Only call eb_lookup_vma once during execbuf ioctl")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306071614.2846708-3-chris@chris-wilson.co.uk
We only call i915_schedule() when we know we have changed the priority
on a request and so require to propagate any change in priority to its
signalers (for PI). By unconditionally checking all of our signalers, we
avoid skipping changes made prior to construction of the request (as the
request may be waited upon before submission when used in parallel).
References: https://gitlab.freedesktop.org/drm/intel/issues/1318
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306071614.2846708-2-chris@chris-wilson.co.uk
The alignment is u64, and yet is_power_of_2() assumes unsigned long,
which might give different results between 32b and 64b kernel.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com
Cc: stable@vger.kernel.org
The release method will undo what we did at creation, and so we
shouldn't care if we have pages or not. Fixes a small leak in the
mock_phys selftest.
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305204258.216302-1-matthew.auld@intel.com
On gen7 and gen7.5 devices, there could be leftover data residuals in
EU/L3 from the retiring context. This patch introduces workaround to clear
that residual contexts, by submitting a batch buffer with dedicated HW
context to the GPU with ring allocation for each context switching.
This security mitigation changes does not triggers any performance
regression. Performance is on par with current drm-tips.
v2: Add igt generated header file for CB kernel assembled with Mesa tool
and addressed use of Kernel macro for ptr_align comment.
v3: Resolve Sparse warnings with newly generated, and imported CB
kernel.
v4: Include new igt generated CB kernel for gen7 and gen7.5. Also
add code formatting and compiler warnings changes (Chris Wilson)
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Acked-by: Chris Wilson <chris@chris-wilso.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306000957.2836150-2-chris@chris-wilson.co.uk
This patch adds framework to submit an arbitrary batchbuffer on each
context switch to clear residual state for render engine on Gen7/7.5
devices.
The idea of always emitting the context and vm setup around each request
is primary to make reset recovery easy, and not require rewriting the
ringbuffer. As each request would set up its own context, leaving it to
the HW to notice and elide no-op context switches, we could restart the
ring at any point, and reorder the requests freely.
However, to avoid emitting clear_residuals() between consecutive requests
in the ringbuffer of the same context, we do want to track the current
context in the ring. In doing so, we need to be careful to only record a
context switch when we are sure the next request will be emitted.
This security mitigation change does not trigger any performance
regression. Performance is on par with current mainline/drm-tip.
v2: Update vm_alias params to point to correct address space "vm" due to
changes made in the patch "f21613797bae98773"
v3-v4: none
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306000957.2836150-1-chris@chris-wilson.co.uk
Requests within a timeline are ordered by that timeline, so awaiting for
the start of a request within the timeline is a no-op. This used to work
by falling out of the mutex_trylock() as the signaler and waiter had the
same timeline and not returning an error.
Fixes: 6a79d84840 ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305134822.2750496-1-chris@chris-wilson.co.uk
Fix the inverted test to emit the wait on the end of the previous
request if we /haven't/ already.
Fixes: 6a79d84840 ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305104210.2619967-1-chris@chris-wilson.co.uk
Converting error to debug print if sink fails to configure scrambling or
TMDS bit clock ratio. In this case, we are timing out while disabling
the scrambling and setting the SCDC ratio, as there is no response
to the I2C SCDC write from the sink device. Error isn't due to something
wrong done from driver side.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302213807.6488-1-swati2.sharma@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We are mistakenly skipping transition watermarks on glk. Fix
up the condition for glk, and toss in the w/a name from
the database.
v2: Reorder the ipc enabled vs. platform check to be more sensible
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20200228203552.30273-3-ville.syrjala@linux.intel.com
Currently we're comparing the watermarks between the old and new states
before we've fully computed the new watermarks. In particular
skl_build_pipe_wm() will not account for the amount of ddb space we'll
have. That information is only available during skl_compute_ddb()
which will proceed to zero out any watermark level exceeding the
ddb allocation. If we're short on ddb space this will end up
adding the plane to the state due erronously determining that the
watermarks have changed. Fix the problem by deferring
skl_wm_add_affected_planes() until we have the final watermarks
computed.
Noticed this when trying enable transition watermarks on glk.
We now computed the trans_wm as 28, but we only had 14 blocks
of ddb, and thus skl_compute_ddb() ended up disabling the cursor
trans_wm every time. Thus we ended up adding the cursor to every
commit that didn't actually affect the cursor at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228203552.30273-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The hardware never sees the uv_wm values (apart from
uv_wm.min_ddb_alloc affecting the ddb allocation). Thus there
is no point in comparing uv_wm to determine if we need to
reprogram the watermark registers. So let's check only the
rgb/y watermark in skl_plane_wm_equals(). But let's leave
a comment behind so that the next person reading this doesn't
get as confused as I did when I added this check.
If the ddb allocation ends up changing due to uv_wm
skl_ddb_add_affected_planes() takes care of adding the plane
to the state.
TODO: we should perhaps just eliminate uv_wm from the state
and simply track the min_ddb_alloc for uv instead.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228203552.30273-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Enable FtrPerCtxtPreemptionGranularityControl bit and select thread-
group as the default preemption level.
v2:
* Remove register whitelisting (Rafael, Tony).
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: piotr.zdunowski@intel.com
Cc: michal.mrozek@intel.com
Cc: Tony Ye <tony.ye@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tony Ye <tony.ye@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304153144.10675-1-tvrtko.ursulin@linux.intel.com
The Thundersoft TST178 tablet uses a DSI panel with an external PWM
controller (as all DSI panels do). But unlike other DSI panels a duty-cycle
of 100% turns the backlight off and 0% sets it to maximum brightness.
I've checked the VBT and there is a BDB_LVDS_BACKLIGHT section, but
it does not set the active_low_pwm flag. This tablet re-uses the main
PCI vendor and product ids for the subsystem ids, so I see no other option
then to add a DMI based quirk to fix this.
Note that the PWM backlight code in intel_panel.c currently does not honor
the vbt.active_low_pwm flag, but that does not matter in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-2-hdegoede@redhat.com
Use intel_panel_compute_brightness() from pwm_setup_backlight() so that
we correctly take i915_modparams.invert_brightness and/or
QUIRK_INVERT_BRIGHTNESS into account when setting + getting the initial
brightness value.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-1-hdegoede@redhat.com
Trying to use i915_request_skip() prior to i915_request_add() causes us
to try and fill the ring upto request->postfix, which has not yet been
set, and so may cause us to memset() past the end of the ring.
Instead of skipping the request immediately, just flag the error on the
request (only accepting the first fatal error we see) and then clear the
request upon submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304121849.2448028-1-chris@chris-wilson.co.uk
intel_ddi_clock_get() tests the DPLL ID against DPLL_ID_ICL_TBTPLL (2)
to determine whether to try to descend into a TBT-specific handler.
However this test will also be true when DPLL4 on EHL is used since that
shares the same DPLL ID (2).
Add an extra check to ensure the PHY is actually a Type-C PHY before
descending into the TBT handling. This should ensure EHL still takes
the correct code path and somewhat future-proof the code as well.
v2: Drop the gen+ check since only gen11+ platforms can have Type-C
outputs. (Imre)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1369
Fixes: 45e4728b87 ("drm/i915: Move DPLL frequency calculation to intel_dpll_mgr.c")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303195043.959913-1-matthew.d.roper@intel.com
drivers/gpu/drm/i915/gvt/gvt.c:264:6: error: no previous prototype for ‘intel_gvt_clean_device’ [-Werror=missing-prototypes]
drivers/gpu/drm/i915/gvt/gvt.c:301:5: error: no previous prototype for ‘intel_gvt_init_device’ [-Werror=missing-prototypes]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304002331.2126072-1-chris@chris-wilson.co.uk
The X1 Extreme is one of the systems that lies about which backlight
interface that it uses in its VBIOS as PWM backlight controls don't work
at all on this machine. It's possible that this panel could be one of
the infamous ones that can switch between PWM mode and DPCD backlight
control mode, but we haven't gotten any more details on this from Lenovo
just yet. For the time being though, making sure the backlight 'just
works' is a bit more important.
So, add a quirk to force DPCD backlight controls on for these systems
based on EDID (since this panel doesn't appear to fill in the device ID).
Hopefully in the future we'll figure out a better way of probing this.
Changes since v2:
* The bugzilla URL is deprecated, bug reporting happens on gitlab now.
Update the messages we print to reflect this
* Also, take the opportunity to move FDO_BUG_URL out of i915_utils.c and
into i915_utils.h so that other places which print things that aren't
traditional errors but are worth filing bugs about, can actually use
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303215320.93491-1-lyude@redhat.com
The whole point of using OUIs is so that we can recognize certain
devices and potentially apply quirks for them. Normally this should work
quite well, but there appears to be quite a number of laptop panels out
there that will fill the OUI but not the device ID. As such, for devices
like this I can't imagine it's a very good idea to try relying on OUIs
for applying quirks. As well, some laptop vendors have confirmed to us
that their panels have this exact issue.
So, let's introduce the ability to apply DP quirks based on EDID
identification. We reuse the same quirk bits for OUI-based quirks, so
that callers can simply check all possible quirks using
drm_dp_has_quirk().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211183358.157448-2-lyude@redhat.com
DP shim's config_stream_type considered to be succeeded when
return value of intel_dp_hdcp2_write_msg() equals to size of
message to be written, it makes config_stream_type to return
a zero success value in order to succeed the HDCP auth.
v2:
- config_stream_type() returns 0 on success. [Ram]
CC: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303073838.25871-1-anshuman.gupta@intel.com
HDCP Repeater initializes seq_num_V to 0 at the beginning of
hdcp Session i.e. after AKE_init received, refer
HDCP 2.2 Spec HDMI PAGE 19, DP PAGE 20.
HDCP 2.2 Comp specs 1B-06 test verifies that whether DUT
considers failure of authentication if the repeater provides a
non-zero value in seq_num_V in the first,
RepeaterAuth_Send_ReceiverID_List message.
Make sure that HDCP repeater initializes seq_num_V to zero at
beginning of session i.e. after AKE_Init, fail the Auth if
there is non zero seq_num_V.
v2:
- Used existing hdcp2_encrypted flag instead of
declaring new flag. [Ram]
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220123217.23635-2-anshuman.gupta@intel.com
As we no longer stash anything inside i915_vma under the exclusive
protection of struct_mutex, we do not need to revoke the i915_vma
stashes before dropping struct_mutex to handle pagefaults. Knowing that
we must drop the struct_mutex while keeping the eb->vma around, means
that we are required to hold onto to the object reference until we have
marked the vma as active.
Fixes: 155ab8836c ("drm/i915: Move object close under its own lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303204345.1859734-3-chris@chris-wilson.co.uk
For our convenience, and to avoid frequent allocations, we placed some
lists we use for execbuf inside the common i915_vma struct. As we look
to parallelise execbuf, such fields guarded by the struct_mutex BKL must
be pulled under local control. Instead of using the i915_vma as our
primary means of tracking the user's list of objects and their virtual
mappings, we use a local eb_vma with the same lists as before (just now
local not global).
This should allow us to only perform the lookup of vma used for
execution once during the execbuf ioctl, as currently we need to remove
our secrets from inside i915_vma everytime we drop the struct_mutex as
another execbuf may use the shared locations.
Once potential user visible consequence is that we can remove the
requirement that the execobj[] be unique, and only require that they do
not conflict (i.e. you cannot softpin the same object into two locations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303204345.1859734-2-chris@chris-wilson.co.uk
With the goal of removing the serialisation from around execbuf, we will
no longer have the privilege of there being a single execbuf in flight
at any time and so will only be able to inspect the user's flags within
the carefully controlled execbuf context. i915_gem_evict_for_node() is
the only user outside of execbuf that currently peeks at the flag to
convert an overlapping softpinned request from ENOSPC to EINVAL. Retract
this nicety and only report ENOSPC if the location is in current use,
either due to this execbuf or another.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303204345.1859734-1-chris@chris-wilson.co.uk
Following the changes in the previous patch
"drm/i915/gen11: Moving WAs to rcs_engine_wa_init()" also moving TGL
Wa_1408615072 to rcs_engine_wa_init() this way after a engine
reset it will be reapplied also restricting it to A0 as it is fixed in
B0 stepping.
BSpec: 52890
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302231421.224322-2-jose.souza@intel.com
This are register of render engine, so after a render reset those
would return to the default value and init_clock_gating() is not
called for single engine reset.
So here moving it rcs_engine_wa_init() that will guarantee that this
WAs will not be lost.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302231421.224322-1-jose.souza@intel.com
Static code analysis tool identified struct lrc_timestamp data as being
uninitialized and then data.ce[] is being checked for NULL/negative
value in the error path. Initializing data variable fixes the issue.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303142347.15696-1-aditya.swarup@intel.com
As we have pinned the timeline (using tl->active_count), we can safely
drop the tl->mutex as we wait for what we believe to be the final
request on that timeline. This is useful for ensuring that we do not
block the engine heartbeat by hogging the kernel_context's timeline on a
dead GPU.
References: https://gitlab.freedesktop.org/drm/intel/issues/1364
Fixes: 058179e72e ("drm/i915/gt: Replace hangcheck by heartbeats")
Fixes: f33a8a5160 ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303140009.1494819-1-chris@chris-wilson.co.uk
The is-closed flag may be added after we have acquired the vma under the
ctx->mutex, but will not take effect until after we release the
vm->mutex. i.e. the flag may be set on the vma as attempt to bind it and
that will cause the vma to be unbound later after we unpin it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303093157.1153887-1-chris@chris-wilson.co.uk
As setup takes a long time, the user may close the context during the
construction of the execbuf. In order to make sure we correctly track
all outstanding work with non-persistent contexts, we need to serialise
the submission with the context closure and mop up any leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303080546.1140508-3-chris@chris-wilson.co.uk
It irks me to use crtc_state_is_legacy_gamma() inside the guts
of the CHV color management code. Let's get rid of it and instead
just consult cgm_mode to figure out if we want to enable the pipe
gamma or the CGM gamma.
Also CHV display engine is based on i965/g4x so we should fall back
to the i965 path when the CGM gamma is not used.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107151725.10507-3-ville.syrjala@linux.intel.com
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to
intel_vgpu_detect() to match other function naming, un-inline
intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and
intel_vgpu_has_huge_gtt() to reduce header interdependencies.
The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-1-jani.nikula@intel.com
