Update VZ guest register & guest TLB access helpers to use the new
assembly macros for parsing register names and creating custom assembly
macro instructions, which has a number of advantages:
- Better code can be generated on toolchains which don't support VZ,
more closely matching those which do, since there is no need to
bounce values via the $at register. Some differences still remain due
to the inability to safely fill branch delay slots and R6 compact
branch forbidden slots with explicitly encoded instructions,
resulting in some extra NOPs added by the assembler.
- Some code duplication between toolchains which do and don't support
VZ instructions is removed, since the helpers are only implemented
once. When the toolchain doesn't implement the instruction an
assembly macro implements it instead.
- Instruction encodings are kept together in the source.
On a generic kernel with KVM VZ support enabled this change saves about
2.5KiB of kernel code when TOOLCHAIN_SUPPORTS_VIRT=n, bringing it down
to about 0.5KiB more than when TOOLCHAIN_SUPPORTS_VIRT=y on r6, and just
68 bytes more on r2.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17772/
Implement a parse_r assembler macro in asm/mipsregs.h to parse a
register in $n form, and a few C macros for defining assembler macro
instructions. These can be used to more transparently support older
binutils versions which don't support for example the msa, virt, xpa, or
crc instructions.
In particular they overcome the difficulty of turning a register name in
$n form into an instruction encoding suitable for giving to .word /
.hword, which is particularly problematic when needed from inline
assembly where the compiler is responsible for register allocation.
Traditionally this had required the use of $at and an extra MOV
instruction, but for CRC instructions with multiple GP register operands
that approach becomes more difficult.
Three assembler macro creation helpers are added:
- _ASM_MACRO_0(OP, ENC)
This is to define an assembler macro for an instruction which has no
operands, for example the VZ TLBGR instruction.
- _ASM_MACRO_2R(OP, R1, R2, ENC)
This is to define an assembler macro for an instruction which has 2
register operands, for example the CFCMSA instruction.
- _ASM_MACRO_3R(OP, R1, R2, R3, ENC)
This is to define an assembler macro for an instruction which has 3
register operands, for example the crc32 instructions.
- _ASM_MACRO_2R_1S(OP, R1, R2, SEL3, ENC)
This is to define an assembler macro for a Cop0 move instruction,
with 2 register operands and an optional register select operand
which defaults to 0, for example the VZ MFGC0 instruction.
Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Marcin Nowakowski <marcin.nowakowski@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17770/
Provide amendments to the MIPS generic platform framework so that
the new generic-based board Ranchu can be chosen to be built.
The Ranchu board is intended to be used by Android emulator. The name
"Ranchu" originates from Android development community. "Goldfish" and
"Ranchu" are terms used for two generations of virtual boards used by
Android emulator. The name "Ranchu" is a newer one among the two, and
this patch deals with Ranchu. However, for historical reasons, some
devices/drivers still contain the name "Goldfish".
MIPS Ranchu machine includes a number of Goldfish devices. The support
for Virtio devices is also included. Ranchu board supports up to 16
Virtio devices which can be attached using Virtio MMIO Bus. This is
summarized in the following picture:
ABUS
||----MIPS CPU
|| | IRQs
||----Goldfish PIC------------(32)--------
|| | | | | | | | | |
||----Goldfish TTY------ | | | | | | | |
|| | | | | | | | |
||----Goldfish RTC-------- | | | | | | |
|| | | | | | | |
||----Goldfish FB----------- | | | | | |
|| | | | | | |
||----Goldfish Events--------- | | | | |
|| | | | | |
||----Goldfish Audio------------ | | | |
|| | | | |
||----Goldfish Battery------------ | | |
|| | | |
||----Android PIPE------------------ | |
|| | |
||----Virtio MMIO Bus | |
|| | | | | |
|| | | (virtio-block)--------- |
|| (16) | |
|| | (virtio-net)------------------
Device Tree is created on the QEMU side based on the information about
devices IO map and IRQ numbers. Kernel will load this DTB using UHI
boot protocol DTB handover mode.
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18138/
Signed-off-by: James Hogan <jhogan@kernel.org>
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The 32-bit support was broken at runtime, it doesn't boot anymore,
witch is hard to debug because even early printk isn't working, also
there are some build warnings. Some newer bootloader may not support
32-bit ELF. So we decide to drop 32-bit support.
Make loongson64 a pure 64-bit arch.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18174/
Signed-off-by: James Hogan <jhogan@kernel.org>
The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
handheld game console, successfully kickstarted in ~2012, running Linux.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18490/
Signed-off-by: James Hogan <jhogan@kernel.org>
According to config2, the associativity would be 5-ways, but the
documentation states 4-ways, which also matches the documented
L2 cache size of 256 kB.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18488/
Signed-off-by: James Hogan <jhogan@kernel.org>
Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18487/
Signed-off-by: James Hogan <jhogan@kernel.org>
Previously, the mips_machtype variable was always initialized
to MACH_INGENIC_JZ4740 even if running on different SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18486/
Signed-off-by: James Hogan <jhogan@kernel.org>
Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
newly supported JZ4770 SoC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18485/
Signed-off-by: James Hogan <jhogan@kernel.org>
jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
arcs_cmdline, up to argc (in fw_arg0). The common code in
fw_init_cmdline will do the exact same thing when run on a system where
fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
use it). Remove the custom implementation & use the generic code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18484/
Signed-off-by: James Hogan <jhogan@kernel.org>
Platforms using DT will typically call __dt_setup_arch from
plat_mem_setup. This in turn calls early_init_dt_scan. When
CONFIG_CMDLINE is set, this leads to its value being copied into
boot_command_line by early_init_dt_scan_chosen. If this happens before
the code setting up boot_command_line in arch_mem_init runs, that code
will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
boot_command_line again, duplicating it. For some command line
parameters (eg. earlycon) this can be a problem. Set up
boot_command_line before early_init_dt_scan_chosen gets called such that
it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
duplicated.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mathieu Malaterre <malat@debian.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18483/
Signed-off-by: James Hogan <jhogan@kernel.org>
MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does
not exist.
Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig
name. Note that BMIPS_GENERIC does the same which confirms that this
patch is needed.
Fixes: eed0eabd12 ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.9+
Patchwork: https://patchwork.linux-mips.org/patch/18495/
[jhogan@kernel.org: Clean up commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4
separate files, so none of these files get cleaned up by make clean.
List the files separately instead.
Fixes: ec3352925b ("MIPS: Remove all generated vmlinuz* files on "make clean"")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18491/
vmlinuz is not built by default for platforms using
COMPRESSION_FNAME (e.g. Malta) due to an erroneous
check on ZBOOT
Signed-off-by: Daniel Sabogal <dsabogalcc@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18466/
Signed-off-by: James Hogan <jhogan@kernel.org>
Since commit d41e6858ba ("MIPS: Kconfig: Set default MIPS system type
as generic") switched the default platform to the "generic" platform,
allmodconfig has been failing with the following linker error (among
other errors):
arch/mips/kernel/vpe-mt.o In function `vpe_run':
(.text+0x59c): undefined reference to `physical_memsize'
The Lantiq platform already worked around the same issue in commit
9050d50e22 ("MIPS: lantiq: Set physical_memsize") by declaring
physical_memsize with the initial value of 0 (on the assumption that the
actual memory size will be hard-coded in the loaded VPE firmware), and
the Malta platform already provided physical_memsize.
Since all other platforms will fail to link with the VPE loader enabled,
only allow Lantiq and Malta platforms to enable it, by way of a
SYS_SUPPORTS_VPE_LOADER which is selected by those two platforms and
which MIPS_VPE_LOADER depends on. SYS_SUPPORTS_MULTITHREADING is now a
dependency of SYS_SUPPORTS_VPE_LOADER so that Kconfig emits a warning if
SYS_SUPPORTS_VPE_LOADER is selected without SYS_SUPPORTS_MULTITHREADING.
Fixes: d41e6858ba ("MIPS: Kconfig: Set default MIPS system type as generic")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Patchwork: https://patchwork.linux-mips.org/patch/18453/
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems. Some architectures fail to handle all of the cases in in
the siginfo union. Some architectures perform a blind copy of the
siginfo union when the si_code is negative. A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.
Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.
A special case is made for x86 x32 format. This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats. By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures. Vastly increasing the testing base and the chances of
finding bugs.
As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function copy_siginfo_from_user32 is used for two things, in ptrace
since the dawn of siginfo for arbirarily modifying a signal that
user space sees, and in sigqueueinfo to send a signal with arbirary
siginfo data.
Create a single copy of copy_siginfo_from_user32 that all architectures
share, and teach it to handle all of the cases in the siginfo union.
In the generic version of copy_siginfo_from_user32 ensure that all
of the fields in siginfo are initialized so that the siginfo structure
can be safely copied to userspace if necessary.
When copying the embedded sigval union copy the si_int member. That
ensures the 32bit values passes through the kernel unchanged.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c
Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in
linux/compat.h
CONFIG_X86_X32 is set when the user requests X32 support.
CONFIG_X86_X32_ABI is set when the user requests X32 support
and the tool-chain has X32 allowing X32 support to be built.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
These already include the GFP_DMA/GFP_DMA32 usage, and will use CMA
memory if enabled, thus avoiding the GFP_NORETRY hack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
nlm_swiotlb_dma_ops is unused code, so the whole swiotlb support is dead.
If it gets resurrected at some point it should use the generic
swiotlb_dma_ops instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Lift the code from x86 so that we behave consistently. In the future we
should probably warn if any of these is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
... having taught the latter that si_errno and si_code might be
swapped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
BPF alignment tests got a conflict because the registers
are output as Rn_w instead of just Rn in net-next, and
in net a fixup for a testcase prohibits logical operations
on pointers before using them.
Also, we should attempt to patch BPF call args if JIT always on is
enabled. Instead, if we fail to JIT the subprogs we should pass
an error back up and fail immediately.
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit
multiply with 128bit result) for MIPS64r6 builds, even in code which
doesn't explicitly use 128bit types, such as the following:
unsigned long func(unsigned long a, unsigned long b)
{
return a > (~0UL) / b;
}
Which GCC rearanges to:
return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff;
Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under
normal circumstances we wouldn't expect any calls to __multi3 to be
generated from kernel code.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Matthew Fortune <matthew.fortune@mips.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17890/
Since commit 68923cdc2e ("MIPS: CM: Add cluster & block args to
mips_cm_lock_other()"), mips_smp_send_ipi_mask() has used
mips_cm_lock_other_cpu() with each CPU number, rather than
mips_cm_lock_other() with the first VPE in each core. Prior to r6,
multicore multithreaded systems such as dual-core dual-thread
interAptivs with CPU Idle enabled (e.g. MIPS Creator Ci40) results in
mips_cm_lock_other() repeatedly hitting WARN_ON(vp != 0).
There doesn't appear to be anything fundamentally wrong about passing a
non-zero VP/VPE number, even if it is a core's region that is locked
into the other region before r6, so remove that particular WARN_ON().
Fixes: 68923cdc2e ("MIPS: CM: Add cluster & block args to mips_cm_lock_other()")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/17883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The MIPS_CPS_NS16550_BASE and MIPS_CPS_NS16550_SHIFT options have no
defaults for non-Malta platforms which select SYS_SUPPORTS_MIPS_CPS
(i.e. the pistachio and generic platforms). This is problematic for
automated allyesconfig and allmodconfig builds based on these platforms,
since make silentoldconfig tries to ask the user for values, and
especially since v4.15 where the default platform was switched to
generic.
Default these options to 0 and arrange for MIPS_CPS_NS16550 to be no
when using that default base address, so that the option only has an
effect when the default is provided (i.e. Malta) or when a value is
provided by the user.
Fixes: 609cf6f229 ("MIPS: CPS: Early debug using an ns16550-compatible UART")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17749/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently MIPS allnoconfig with CONFIG_BCM47XX=y fails to compile due to
neither BCM47XX_BCMA nor BCM47XX_SSB being selected. This leads the
enumeration in arch/mips/include/asm/mach-bcm47xx/bcm47xx.h to be empty,
and compilation fails:
In file included from arch/mips/bcm47xx/irq.c:32:0:
./arch/mips/include/asm/mach-bcm47xx/bcm47xx.h:34:1: error: expected
identifier before '}' token
};
^
make[2]: *** [scripts/Makefile.build:314: arch/mips/bcm47xx/irq.o] Error 1
Fix this by ensuring that BCM47XX_SSB is selected if BCM47XX_BCMA is
not. This allows us to select either system or both, but not neither.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17703/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Currently MIPS allnoconfig with CONFIG_MIKROTIK_RB532=y fails to link
due to missing support for mac_pton():
LD vmlinux
arch/mips/rb532/devices.o: In function `setup_kmac':
devices.c:(.init.text+0xc): undefined reference to `mac_pton'
Rather than adding dependencies to the platform to force inclusion of
GENERIC_NET_UTILS which is selected by CONFIG_NET, just exclude the
setup of the MAC address if CONFIG_NET is not selected in the kernel
config.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently MIPS allnoconfig with CONFIG_MIKROTIK_RB532=y fails to link due to
missing support for early_serial_setup():
LD vmlinux
arch/mips/rb532/serial.o: In function `setup_serial_port':
serial.c:(.init.text+0x14): undefined reference to `early_serial_setup'
Rather than adding dependencies to the platform to force inclusion of
SERIAL_8250_CONSOLE together with it's dependencies like TTY, HAS_IOMEM,
etc, just exclude arch/mips/rb532/serial.c from the build when it's
dependency is not selected in the kernel config.
Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17701/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently MIPS allnoconfig with CONFIG_ATH25=y fails to link due to
missing support for early_serial_setup():
LD vmlinux
arch/mips/ath25/devices.o: In function ath25_serial_setup':
devices.c:(.init.text+0x68): undefined reference to 'early_serial_setup'
Rather than adding dependencies to the platform to force inclusion of
SERIAL_8250_CONSOLE together with it's dependencies like TTY, HAS_IOMEM,
etc, just make ath25_serial_setup() a no-op when the dependency is not
selected in the kernel config.
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17700/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit aef9a7bd9b ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.
Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
This causes garbled output from userspace:
[ 5.220000] random: procd urandom read with 49 bits of entropy available
ers
[kee
Fix this by forcing it to be configured on boot, resulting in the
expected output:
[ 5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Fixes: aef9a7bd9b ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.
The following symbols are then made available from INIT_TASK_DATA() linker
script macro:
init_thread_union
init_stack
INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack. init_thread_union is given its own section so that
it can be placed into the stack space in the right order. I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Make read_c0_prid() use the new constant accessor macros so that it can
potentially be optimised or removed by the compiler. This is
particularly important under virtualisation, where even with hardware
assisted virtualisation (VZ), access to the PRid register may need to be
emulated by the hypervisor.
In particular this helps eliminate the read of the PRid register in the
rather frequently called add_interrupt_randomness() (which calls into
arch/mips/include/asm/timex.h) when the prid is unused but the read
can't be removed due to the inline asm being marked __volatile__.
Reported-by: Yann LeDu <Yann.LeDu@imgtec.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17923/
Some Cop0 registers are constant and have no side effects when read.
There is no need for the inline asm to read these to be marked
__volatile__, and doing so prevents them from being removed by the
compiler.
Add a few new accessor macros to handle these registers more efficiently
(especially for the sake of running in a guest where redundant access to
the register may trap to the hypervisor):
__read_const_32bit_c0_register()
__read_const_64bit_c0_register()
__read_const_ulong_c0_register()
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17922/
Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fix an API loophole introduced with commit 9791554b45 ("MIPS,prctl:
add PR_[GS]ET_FP_MODE prctl options for MIPS"), where the caller of
prctl(2) is incorrectly allowed to make a change to CP0.Status.FR or
CP0.Config5.FRE register bits even if CONFIG_MIPS_O32_FP64_SUPPORT has
not been enabled, despite that an executable requesting the mode
requested via ELF file annotation would not be allowed to run in the
first place, or for n64 and n64 ABI tasks which do not have non-default
modes defined at all. Add suitable checks to `mips_set_process_fp_mode'
and bail out if an invalid mode change has been requested for the ABI in
effect, even if the FPU hardware or emulation would otherwise allow it.
Always succeed however without taking any further action if the mode
requested is the same as one already in effect, regardless of whether
any mode change, should it be requested, would actually be allowed for
the task concerned.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 9791554b45 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/17800/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
To reduce the reliance on device ids, pass the dma channel numbers to
the enet devices as platform data.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set I/O port resource structs to have IORESOURCE_IO in their type field.
Previously we marked these as merely IORESOURCE_BUSY without indicating the
type. Setting the type doesn't fix any functional problem but makes %pR
on the resource work better.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-18
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow arbitrary function calls from one BPF function to another BPF function.
As of today when writing BPF programs, __always_inline had to be used in
the BPF C programs for all functions, unnecessarily causing LLVM to inflate
code size. Handle this more naturally with support for BPF to BPF calls
such that this __always_inline restriction can be overcome. As a result,
it allows for better optimized code and finally enables to introduce core
BPF libraries in the future that can be reused out of different projects.
x86 and arm64 JIT support was added as well, from Alexei.
2) Add infrastructure for tagging functions as error injectable and allow for
BPF to return arbitrary error values when BPF is attached via kprobes on
those. This way of injecting errors generically eases testing and debugging
without having to recompile or restart the kernel. Tags for opting-in for
this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef.
3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper
call for XDP programs. First part of this work adds handling of BPF
capabilities included in the firmware, and the later patches add support
to the nfp verifier part and JIT as well as some small optimizations,
from Jakub.
4) The bpftool now also gets support for basic cgroup BPF operations such
as attaching, detaching and listing current BPF programs. As a requirement
for the attach part, bpftool can now also load object files through
'bpftool prog load'. This reuses libbpf which we have in the kernel tree
as well. bpftool-cgroup man page is added along with it, from Roman.
5) Back then commit e87c6bc385 ("bpf: permit multiple bpf attachments for
a single perf event") added support for attaching multiple BPF programs
to a single perf event. Given they are configured through perf's ioctl()
interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF
command in this work in order to return an array of one or multiple BPF
prog ids that are currently attached, from Yonghong.
6) Various minor fixes and cleanups to the bpftool's Makefile as well
as a new 'uninstall' and 'doc-uninstall' target for removing bpftool
itself or prior installed documentation related to it, from Quentin.
7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is
required for the test_dev_cgroup test case to run, from Naresh.
8) Fix reporting of XDP prog_flags for nfp driver, from Jakub.
9) Fix libbpf's exit code from the Makefile when libelf was not found in
the system, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
global bpf_jit_enable variable is tested multiple times in JITs,
blinding and verifier core. The malicious root can try to toggle
it while loading the programs. This race condition was accounted
for and there should be no issues, but it's safer to avoid
this race condition.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
After the vcpu_load/vcpu_put pushdown, the handling of asynchronous VCPU
ioctl is already much clearer in that it is obvious that they bypass
vcpu_load and vcpu_put.
However, it is still not perfect in that the different state of the VCPU
mutex is still hidden in the caller. Separate those ioctls into a new
function kvm_arch_vcpu_async_ioctl that returns -ENOIOCTLCMD for more
"traditional" synchronous ioctls.
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the calls to vcpu_load() and vcpu_put() in to the architecture
specific implementations of kvm_arch_vcpu_ioctl() which dispatches
further architecture-specific ioctls on to other functions.
Some architectures support asynchronous vcpu ioctls which cannot call
vcpu_load() or take the vcpu->mutex, because that would prevent
concurrent execution with a running VCPU, which is the intended purpose
of these ioctls, for example because they inject interrupts.
We repeat the separate checks for these specifics in the architecture
code for MIPS, S390 and PPC, and avoid taking the vcpu->mutex and
calling vcpu_load for these ioctls.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_regs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_regs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_run().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 parts
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Rebased. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Complement commit c23b3d1a53 ("MIPS: ptrace: Change GP regset to use
correct core dump register layout") and also reject outsized
PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the
NT_PRSTATUS regset.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: c23b3d1a53 ("MIPS: ptrace: Change GP regset to use correct core dump register layout")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.17+
Patchwork: https://patchwork.linux-mips.org/patch/17930/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Complement commit d614fd58a2 ("mips/ptrace: Preserve previous
registers for short regset write") and like with the PTRACE_GETREGSET
ptrace(2) request also apply a BUILD_BUG_ON check for the size of the
`elf_fpreg_t' type in the PTRACE_SETREGSET request handler.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: d614fd58a2 ("mips/ptrace: Preserve previous registers for short regset write")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Patchwork: https://patchwork.linux-mips.org/patch/17929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix a commit 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for
FP regset") public API regression, then activated by commit 1db1af84d6
("MIPS: Basic MSA context switching support"), that caused the FCSR
register not to be read or written for CONFIG_CPU_HAS_MSA kernel
configurations (regardless of actual presence or absence of the MSA
feature in a given processor) with ptrace(2) PTRACE_GETREGSET and
PTRACE_SETREGSET requests nor recorded in core dumps.
This is because with !CONFIG_CPU_HAS_MSA configurations the whole of
`elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR
in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA
configurations array elements are copied individually, and then only the
leading 32 FGR slots while the remaining slot is ignored.
Correct the code then such that only FGR slots are copied in the
respective !MSA and MSA helpers an then the FCSR slot is handled
separately in common code. Use `ptrace_setfcr31' to update the FCSR
too, so that the read-only mask is respected.
Retrieving a correct value of FCSR is important in debugging not only
for the human to be able to get the right interpretation of the
situation, but for correct operation of GDB as well. This is because
the condition code bits in FSCR are used by GDB to determine the
location to place a breakpoint at when single-stepping through an FPU
branch instruction. If such a breakpoint is placed incorrectly (i.e.
with the condition reversed), then it will be missed, likely causing the
debuggee to run away from the control of GDB and consequently breaking
the process of investigation.
Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2)
request which is unaffected, so the regression only really hits with
post-mortem debug sessions using a core dump file, in which case
execution, and consequently single-stepping through branches is not
possible. Of course core files created by buggy kernels out there will
have the value of FCSR recorded clobbered, but such core files cannot be
corrected and the person using them simply will have to be aware that
the value of FCSR retrieved is not reliable.
Which also means we can likely get away without defining a replacement
API which would ensure a correct value of FSCR to be retrieved, or none
at all.
This is based on previous work by Alex Smith, extensively rewritten.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Update commit d614fd58a2 ("mips/ptrace: Preserve previous registers
for short regset write") bug and consistently consume all data supplied
to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that
a zero data buffer counter is returned where insufficient data has been
given to fill a whole number of FP general registers.
In reality this is not going to happen, as the caller is supposed to
only supply data covering a whole number of registers and it is verified
in `ptrace_regset' and again asserted in `fpr_set', however structuring
code such that the presence of trailing partial FP general register data
causes `fpr_set_msa' to return with a non-zero data buffer counter makes
it appear that this trailing data will be used if there are subsequent
writes made to FP registers, which is going to be the case with the FCSR
once the missing write to that register has been fixed.
Fixes: d614fd58a2 ("mips/ptrace: Preserve previous registers for short regset write")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Patchwork: https://patchwork.linux-mips.org/patch/17927/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Complement commit d614fd58a2 ("mips/ptrace: Preserve previous
registers for short regset write") and ensure that no partial register
write attempt is made with PTRACE_SETREGSET, as we do not preinitialize
any temporaries used to hold incoming register data and consequently
random data could be written.
It is the responsibility of the caller, such as `ptrace_regset', to
arrange for writes to span whole registers only, so here we only assert
that it has indeed happened.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17926/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In preparation to fix a commit 72b22bbad1 ("MIPS: Don't assume 64-bit
FP registers for FP regset") FCSR access regression factor out
NT_PRFPREG regset access helpers for the non-MSA and the MSA variants
respectively, to avoid having to deal with excessive indentation in the
actual fix.
No functional change, however use `target->thread.fpu.fpr[0]' rather
than `target->thread.fpu.fpr[i]' for FGR holding type size determination
as there's no `i' variable to refer to anymore, and for the factored out
`i' variable declaration use `unsigned int' rather than `unsigned' as
its type, following the common style.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Patchwork: https://patchwork.linux-mips.org/patch/17925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Mark intentional fall throughs in switch statements with a consistent
comment.
In most of the cases, a new comment line containing text "fall through"
is inserted. In some of the cases, existing comment contained a variation
of the text "fall through" (for example, "FALL THROUGH" or "drop through").
In such cases, the existing comment is modified to contain "fall through".
Lastly, in two cases, code segments were described in comments as "fall
througs", but were in reality "breaks out" of switch statement. In such
cases, existing comments are accordingly modified.
Apart from making code easier to follow and debug, this change enables
some static code analysers to interpret newly inserted comments as their
annotations (and, therefore, not issue warnings of type "fall through in
switch statement", which is desireable, since marked fallthroughs are
intentional).
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17588/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Replace several instances of multiple assignment with individual
assignments.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17587/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move invocation of fpu_emu() to be out of if statement condition.
This makes code easier to follow and debug, and fixes a checkpatch
warning.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17586/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Declare function srl128() as static, since it it used just locally
to the source file.
This also removes a sparse warning for corresponding file.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17585/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS CPS has a build warning on kernels configured for MIPS32R1 or
MIPS64R1, due to the use of .set mt without a prior .set mips{32,64}r2:
arch/mips/kernel/cps-vec.S Assembler messages:
arch/mips/kernel/cps-vec.S:238: Warning: the `mt' extension requires MIPS32 revision 2 or greater
Add .set MIPS_ISA_LEVEL_RAW before .set mt to silence the warning.
Fixes: 245a7868d2 ("MIPS: smp-cps: rework core/VPE initialisation")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17699/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
Here are some small serdev and serial fixes for 4.15-rc3. They resolve
some reported problems:
- a number of serdev fixes to resolve crashes
- MIPS build fixes for their serial port
- a new 8250 device id
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia9GQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSEgCfZ/zINl1ItdXcMUr1cnznwNgFGhAAoIoIpmre
+4qtH6PjV/+kq+2j2lmG
=bxjP
-----END PGP SIGNATURE-----
Merge tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serdev and serial fixes for 4.15-rc3. They resolve
some reported problems:
- a number of serdev fixes to resolve crashes
- MIPS build fixes for their serial port
- a new 8250 device id
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MIPS: Add custom serial.h with BASE_BAUD override for generic kernel
serdev: ttyport: fix tty locking in close
serdev: ttyport: fix NULL-deref on hangup
serdev: fix receive_buf return value when no callback
serdev: ttyport: add missing receive_buf sanity checks
serial: 8250_early: Only set divisor if valid clk & baud
serial: 8250_pci: Add Amazon PCI serial device ID
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure. This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs. Programs
using them, for example, the bpf selftest fail to compile on these
architectures.
For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it. For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.
To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type. An asm-generic header file covers the architectures that
export pt_regs today.
The arch-specific enablement for s390 and arm64 follows in separate
commits.
Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* PPC bugfix: HPT guests on a POWER9 radix host
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJaICi1AAoJEL/70l94x66DjvEIAIML/e9YX1YrJZi0rsB9cbm0
Le3o5b3wKxPrlZdnpOZQ2mVWubUQdiHMPGX6BkpgyiJWUchnbj5ql1gUf5S0i3jk
TOk6nae6DU94xBuboeqZJlmx2VfPY/fqzLWsX3HFHpnzRl4XvXL5o7cWguIxVcVO
yU6bPgbAXyXSBennLWZxC3aQ2Ojikr3uxZQpUZTAPOW5hFINpCKCpqJBMxsb67wq
rwI0cJhRl92mHpbe8qeNJhavqY5eviy9iPUaZrOW9P4yw1uqjTAjgsUc1ydiaZSV
rOHeKBOgVfY/KBaNJKyKySfuL1MJ+DLcQqm9RlGpKNpFIeB0vvSf0gtmmqIAXIk=
=kh2y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- x86 bugfixes: APIC, nested virtualization, IOAPIC
- PPC bugfix: HPT guests on a POWER9 radix host
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM: VMX: Fix vmx->nested freeing when no SMI handler
KVM: VMX: Fix rflags cache during vCPU reset
KVM: X86: Fix softlockup when get the current kvmclock
KVM: lapic: Fixup LDR on load in x2apic
KVM: lapic: Split out x2apic ldr calculation
KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
KVM: x86: ioapic: Preserve read-only values in the redirection table
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
KVM: x86: ioapic: Don't fire level irq when Remote IRR set
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
KVM: x86: fix em_fxstor() sleeping while in atomic
KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
...
In response to compile breakage introduced by a series that added the
pud_write helper to x86, Stephen notes:
did you consider using the other paradigm:
In arch include files:
#define pud_write pud_write
static inline int pud_write(pud_t pud)
.....
Then in include/asm-generic/pgtable.h:
#ifndef pud_write
tatic inline int pud_write(pud_t pud)
{
....
}
#endif
If you had, then the powerpc code would have worked ... ;-) and many
of the other interfaces in include/asm-generic/pgtable.h are
protected that way ...
Given that some architecture already define pmd_write() as a macro, it's
a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE.
Link: http://lkml.kernel.org/r/151129126721.37405.13339850900081557813.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a custom serial.h header for MIPS, allowing platforms to override
the asm-generic version if required.
The generic platform uses this header to set BASE_BAUD to 0. The
generic platform supports multiple boards, which may have different
UART clocks. Also one of the boards supported is the Boston FPGA board,
where the UART clock depends on the loaded FPGA bitfile. As such there
is no way that the generic kernel can set a compile time default
BASE_BAUD.
Commit 31cb9a8575 ("earlycon: initialise baud field of earlycon device
structure") changed the behavior of of_setup_earlycon such that any baud
rate set in the device tree is now set in the earlycon structure. The
UART driver will then calculate a divisor based on BASE_BAUD and set it.
With MIPS generic kernels this resulted in garbage output due to the
incorrect uart clock rate being used to calculate a divisor. This
commit, combined with "serial: 8250_early: Only set divisor if valid clk
& baud" prevents the earlycon code setting a bad divisor and restores
earlycon output.
Fixes: 31cb9a8575 ("earlycon: initialise baud field of earlycon device structure")
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".
This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.
Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull timer updates from Thomas Gleixner:
- The final conversion of timer wheel timers to timer_setup().
A few manual conversions and a large coccinelle assisted sweep and
the removal of the old initialization mechanisms and the related
code.
- Remove the now unused VSYSCALL update code
- Fix permissions of /proc/timer_list. I still need to get rid of that
file completely
- Rename a misnomed clocksource function and remove a stale declaration
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
m68k/macboing: Fix missed timer callback assignment
treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
timer: Remove redundant __setup_timer*() macros
timer: Pass function down to initialization routines
timer: Remove unused data arguments from macros
timer: Switch callback prototype to take struct timer_list * argument
timer: Pass timer_list pointer to callbacks unconditionally
Coccinelle: Remove setup_timer.cocci
timer: Remove setup_*timer() interface
timer: Remove init_timer() interface
treewide: setup_timer() -> timer_setup() (2 field)
treewide: setup_timer() -> timer_setup()
treewide: init_timer() -> setup_timer()
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
s390: cmm: Convert timers to use timer_setup()
lightnvm: Convert timers to use timer_setup()
drivers/net: cris: Convert timers to use timer_setup()
drm/vc4: Convert timers to use timer_setup()
block/laptop_mode: Convert timers to use timer_setup()
net/atm/mpc: Avoid open-coded assignment of timer callback function
...
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".
Done using the following semantic patch:
@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@
DEFINE_TIMER(_timer, _callback);
@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@
void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
{ ... }
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----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=fCeF
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking update from Jeff Layton:
"A couple of fixes for a patch that went into v4.14, and the bug report
just came in a few days ago.. It passes my (minimal) testing, and has
been in linux-next for a few days now.
I also would like to get my address changed in MAINTAINERS to clear
that hurdle"
* tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall
fcntl: don't leak fd reference when fixup_compat_flock fails
MAINTAINERS: s/jlayton@poochiereds.net/jlayton@kernel.org/
Pull compat and uaccess updates from Al Viro:
- {get,put}_compat_sigset() series
- assorted compat ioctl stuff
- more set_fs() elimination
- a few more timespec64 conversions
- several removals of pointless access_ok() in places where it was
followed only by non-__ variants of primitives
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
coredump: call do_unlinkat directly instead of sys_unlink
fs: expose do_unlinkat for built-in callers
ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
ipmi: get rid of pointless access_ok()
pi433: sanitize ioctl
cxlflash: get rid of pointless access_ok()
mtdchar: get rid of pointless access_ok()
r128: switch compat ioctls to drm_ioctl_kernel()
selection: get rid of field-by-field copyin
VT_RESIZEX: get rid of field-by-field copyin
i2c compat ioctls: move to ->compat_ioctl()
sched_rr_get_interval(): move compat to native, get rid of set_fs()
mips: switch to {get,put}_compat_sigset()
sparc: switch to {get,put}_compat_sigset()
s390: switch to {get,put}_compat_sigset()
ppc: switch to {get,put}_compat_sigset()
parisc: switch to {get,put}_compat_sigset()
get_compat_sigset()
get rid of {get,put}_compat_itimerspec()
io_getevents: Use timespec64 to represent timeouts
...
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may be
required to satisfy a write fault to also be flushed ("on disk") before
the kernel returns to userspace from the fault handler. Effectively
every write-fault that dirties metadata completes an fsync() before
returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
type guarantees that the MAP_SYNC flag is validated as supported by the
filesystem's ->mmap() file operation.
* Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
enables interoperability with environments that only implement the
standardized methods.
* Add support for the ACPI 6.2 NVDIMM media error injection methods.
* Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
last shutdown status, firmware update, SMART error injection, and
SMART alarm threshold control.
* Cleanup physical address information disclosures to be root-only.
* Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
* Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
957ac8c421 dax: fix PMD faults on zero-length files
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
a39e596baa xfs: support for synchronous DAX faults
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=h2vZ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"Save for a few late fixes, all of these commits have shipped in -next
releases since before the merge window opened, and 0day has given a
build success notification.
The ext4 touches came from Jan, and the xfs touches have Darrick's
reviewed-by. An xfstest for the MAP_SYNC feature has been through
a few round of reviews and is on track to be merged.
- Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may
be required to satisfy a write fault to also be flushed ("on disk")
before the kernel returns to userspace from the fault handler.
Effectively every write-fault that dirties metadata completes an
fsync() before returning from the fault handler. The new
MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
is validated as supported by the filesystem's ->mmap() file
operation.
- Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
This enables interoperability with environments that only implement
the standardized methods.
- Add support for the ACPI 6.2 NVDIMM media error injection methods.
- Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
latch last shutdown status, firmware update, SMART error injection,
and SMART alarm threshold control.
- Cleanup physical address information disclosures to be root-only.
- Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
- Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
- 957ac8c421 ("dax: fix PMD faults on zero-length files"):
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
- a39e596baa ("xfs: support for synchronous DAX faults") and
7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"
* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
acpi, nfit: add 'Enable Latch System Shutdown Status' command support
dax: fix general protection fault in dax_alloc_inode
dax: fix PMD faults on zero-length files
dax: stop requiring a live device for dax_flush()
brd: remove dax support
dax: quiet bdev_dax_supported()
fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
tools/testing/nvdimm: unit test clear-error commands
acpi, nfit: validate commands against the device type
tools/testing/nvdimm: stricter bounds checking for error injection commands
xfs: support for synchronous DAX faults
xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
ext4: Support for synchronous DAX faults
ext4: Simplify error handling in ext4_dax_huge_fault()
dax: Implement dax_finish_sync_fault()
dax, iomap: Add support for synchronous faults
mm: Define MAP_SYNC and VM_SYNC flags
dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
dax: Allow dax_iomap_fault() to return pfn
dax: Fix comment describing dax_iomap_fault()
...
-----BEGIN PGP SIGNATURE-----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=3vy0
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"kAFS filesystem driver overhaul.
The major points of the overhaul are:
(1) Preliminary groundwork is laid for supporting network-namespacing
of kAFS. The remainder of the namespacing work requires some way
to pass namespace information to submounts triggered by an
automount. This requires something like the mount overhaul that's
in progress.
(2) sockaddr_rxrpc is used in preference to in_addr for holding
addresses internally and add support for talking to the YFS VL
server. With this, kAFS can do everything over IPv6 as well as
IPv4 if it's talking to servers that support it.
(3) Callback handling is overhauled to be generally passive rather
than active. 'Callbacks' are promises by the server to tell us
about data and metadata changes. Callbacks are now checked when
we next touch an inode rather than actively going and looking for
it where possible.
(4) File access permit caching is overhauled to store the caching
information per-inode rather than per-directory, shared over
subordinate files. Whilst older AFS servers only allow ACLs on
directories (shared to the files in that directory), newer AFS
servers break that restriction.
To improve memory usage and to make it easier to do mass-key
removal, permit combinations are cached and shared.
(5) Cell database management is overhauled to allow lighter locks to
be used and to make cell records autonomous state machines that
look after getting their own DNS records and cleaning themselves
up, in particular preventing races in acquiring and relinquishing
the fscache token for the cell.
(6) Volume caching is overhauled. The afs_vlocation record is got rid
of to simplify things and the superblock is now keyed on the cell
and the numeric volume ID only. The volume record is tied to a
superblock and normal superblock management is used to mediate
the lifetime of the volume fscache token.
(7) File server record caching is overhauled to make server records
independent of cells and volumes. A server can be in multiple
cells (in such a case, the administrator must make sure that the
VL services for all cells correctly reflect the volumes shared
between those cells).
Server records are now indexed using the UUID of the server
rather than the address since a server can have multiple
addresses.
(8) File server rotation is overhauled to handle VMOVED, VBUSY (and
similar), VOFFLINE and VNOVOL indications and to handle rotation
both of servers and addresses of those servers. The rotation will
also wait and retry if the server says it is busy.
(9) Data writeback is overhauled. Each inode no longer stores a list
of modified sections tagged with the key that authorised it in
favour of noting the modified region of a page in page->private
and storing a list of keys that made modifications in the inode.
This simplifies things and allows other keys to be used to
actually write to the server if a key that made a modification
becomes useless.
(10) Writable mmap() is implemented. This allows a kernel to be build
entirely on AFS.
Note that Pre AFS-3.4 servers are no longer supported, though this can
be added back if necessary (AFS-3.4 was released in 1998)"
* tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (35 commits)
afs: Protect call->state changes against signals
afs: Trace page dirty/clean
afs: Implement shared-writeable mmap
afs: Get rid of the afs_writeback record
afs: Introduce a file-private data record
afs: Use a dynamic port if 7001 is in use
afs: Fix directory read/modify race
afs: Trace the sending of pages
afs: Trace the initiation and completion of client calls
afs: Fix documentation on # vs % prefix in mount source specification
afs: Fix total-length calculation for multiple-page send
afs: Only progress call state at end of Tx phase from rxrpc callback
afs: Make use of the YFS service upgrade to fully support IPv6
afs: Overhaul volume and server record caching and fileserver rotation
afs: Move server rotation code into its own file
afs: Add an address list concept
afs: Overhaul cell database management
afs: Overhaul permit caching
afs: Overhaul the callback handling
afs: Rename struct afs_call server member to cm_server
...
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
empty_bad_page() and empty_bad_pte_table() seem to be relics from old
days which is not used by any code for a long time. I have tried to
find when exactly but this is not really all that straightforward due to
many code movements - traces disappear around 2.4 times.
Anyway no code really references neither empty_bad_page nor
empty_bad_pte_table. We only allocate the storage which is not used by
anybody so remove them.
Link: http://lkml.kernel.org/r/20171004150045.30755-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Ralf Baechle <ralf@linus-mips.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are the main MIPS changes for 4.15.
Fixes:
- ralink: Fix MT7620 PCI build issues (4.5)
- Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
(4.1)
- Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
- ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
- ralink: Fix MT7628 pinmux (3.19)
- BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
- Fix n32 core dumping as o32 since regset support (3.13)
- ralink: Drop obsolete USB_ARCH_HAS_HCD select
Build system:
- Default to "generic" (multiplatform) system type instead of IP22
- Use generic little endian MIPS32 r2 configuration as default defconfig
instead of ip22_defconfig
FPU emulation:
- Fix exception generation for certain R6 FPU instructions
SMP:
- Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
spaces
Miscellaneous:
- Add iomem resource for kernel bss section for kexec/kdump
- Atomics: Nudge writes on bit unlock
- DT files: Standardise "ok" -> "okay"
Platform support:
BMIPS:
- Enable HARDIRQS_SW_RESEND
Broadcom BCM63XX:
- Add clkdev lookup support
- Update clk driver, UART driver, DTs to handle named refclk from DTs
- Split apart various clocks to more closely match hardware
- Add ethernet clocks
Cavium Octeon:
- Remove usage of cvmx_wait() in favour of __delay()
ImgTec Pistachio:
- DT: Drop deprecated dwmmc num-slots property
Ingenic JZ4780:
- Add NFS root to Ci20 defconfig
- Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
driver with this SoC
Generic (multiplatform):
- Migrate xilfpga (MIPSfpga) platform to the generic platform
Lantiq xway:
- Fix ASC0/ASC1 clocks
Minor cleanups:
- Define virt_to_pfn()
- Make thread_saved_pc static
- Simplify 32-bit sign extension in __read_64bit_c0_split()
- DMA: Use vma_pages() helper
- FPU emulation: Replace unsigned with unsigned int
- MM: Removed unused lastpfn
- Alchemy: Make clk_ops const
- Lasat: Use setup_timer() helper
- ralink: Use BIT() in MT7620 PCI driver
-----BEGIN PGP SIGNATURE-----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=xbL0
-----END PGP SIGNATURE-----
Merge tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"These are the main MIPS changes for 4.15.
Fixes:
- ralink: Fix MT7620 PCI build issues (4.5)
- Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
(4.1)
- Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
- ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
- ralink: Fix MT7628 pinmux (3.19)
- BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
- Fix n32 core dumping as o32 since regset support (3.13)
- ralink: Drop obsolete USB_ARCH_HAS_HCD select
Build system:
- Default to "generic" (multiplatform) system type instead of IP22
- Use generic little endian MIPS32 r2 configuration as default
defconfig instead of ip22_defconfig
FPU emulation:
- Fix exception generation for certain R6 FPU instructions
SMP:
- Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
spaces
Miscellaneous:
- Add iomem resource for kernel bss section for kexec/kdump
- Atomics: Nudge writes on bit unlock
- DT files: Standardise "ok" -> "okay"
Minor cleanups:
- Define virt_to_pfn()
- Make thread_saved_pc static
- Simplify 32-bit sign extension in __read_64bit_c0_split()
- DMA: Use vma_pages() helper
- FPU emulation: Replace unsigned with unsigned int
- MM: Removed unused lastpfn
- Alchemy: Make clk_ops const
- Lasat: Use setup_timer() helper
- ralink: Use BIT() in MT7620 PCI driver
Platform support:
BMIPS:
- Enable HARDIRQS_SW_RESEND
Broadcom BCM63XX:
- Add clkdev lookup support
- Update clk driver, UART driver, DTs to handle named refclk from DTs
- Split apart various clocks to more closely match hardware
- Add ethernet clocks
Cavium Octeon:
- Remove usage of cvmx_wait() in favour of __delay()
ImgTec Pistachio:
- DT: Drop deprecated dwmmc num-slots property
Ingenic JZ4780:
- Add NFS root to Ci20 defconfig
- Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
driver with this SoC
Generic (multiplatform):
- Migrate xilfpga (MIPSfpga) platform to the generic platform
Lantiq xway:
- Fix ASC0/ASC1 clocks"
* tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits)
MIPS: Add iomem resource for kernel bss section.
MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP
MIPS: BMIPS: Enable HARDIRQS_SW_RESEND
MIPS: pci: Make use of the BIT() macro inside the mt7620 driver
MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
MIPS: pci: Remove duplicate define in mt7620 driver
MIPS: ralink: Fix typo in mt7628 pinmux function
MIPS: ralink: Fix MT7628 pinmux
MIPS: Fix odd fp register warnings with MIPS64r2
watchdog: jz4780: Allow selection of jz4740-wdt driver
MIPS/ptrace: Update syscall nr on register changes
MIPS/ptrace: Pick up ptrace/seccomp changed syscalls
MIPS: Fix an n32 core file generation regset support regression
MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
MIPS: page.h: Define virt_to_pfn()
MIPS: Xilfpga: Switch to using generic defconfigs
MIPS: generic: Add support for MIPSfpga
MIPS: Set defconfig target to a generic system for 32r2el
MIPS: Kconfig: Set default MIPS system type as generic
MIPS: DTS: Remove num-slots from Pistachio SoC
...
Currently, we're capping the values too low in the F_GETLK64 case. The
fields in that structure are 64-bit values, so we shouldn't need to do
any sort of fixup there.
Make sure we check that assumption at build time in the future however
by ensuring that the sizes we're copying will fit.
With this, we no longer need COMPAT_LOFF_T_MAX either, so remove it.
Fixes: 94073ad77f (fs/locks: don't mess with the address limit in compat_fcntl64)
Reported-by: Vitaly Lipatov <lav@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing memory
leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node. The
prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to dtb
compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage Technology,
shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
Opal Kelly, and Next Thing
-----BEGIN PGP SIGNATURE-----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=jgpN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
Pull i2c updates from Wolfram Sang:
"This contains two bigger than usual tree-wide changes this time. They
all have proper acks, caused no merge conflicts in linux-next where
they have been for a while. They are namely:
- to-gpiod conversion of the i2c-gpio driver and its users (touching
arch/* and drivers/mfd/*)
- adding a sbs-manager based on I2C core updates to SMBus alerts
(touching drivers/power/*)
Other notable changes:
- i2c_boardinfo can now carry a dev_name to be used when the device
is created. This is because some devices in ACPI world need fixed
names to find the regulators.
- the designware driver got a long discussed overhaul of its PM
handling. img-scb and davinci got PM support, too.
- at24 driver has way better OF support. And it has a new maintainer.
Thanks Bartosz for stepping up!
The rest is regular driver updates and fixes"
* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
ARM: sa1100: simpad: Correct I2C GPIO offsets
i2c: aspeed: Deassert reset in probe
eeprom: at24: Add OF device ID table
MAINTAINERS: new maintainer for AT24 driver
i2c: nuc900: remove platform_data, too
i2c: thunderx: Remove duplicate NULL check
i2c: taos-evm: Remove duplicate NULL check
i2c: Make i2c_unregister_device() NULL-aware
i2c: xgene-slimpro: Support v2
i2c: mpc: remove useless variable initialization
i2c: omap: Trigger bus recovery in lockup case
i2c: gpio: Add support for named gpios in DT
dt-bindings: i2c: i2c-gpio: Add support for named gpios
i2c: gpio: Local vars in probe
i2c: gpio: Augment all boardfiles to use open drain
i2c: gpio: Enforce open drain through gpiolib
gpio: Make it possible for consumers to enforce open drain
i2c: gpio: Convert to use descriptors
power: supply: sbs-message: fix some code style issues
power: supply: sbs-battery: remove unchecked return var
...
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture
doesn't support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=ALJf
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- turn dma_cache_sync into a dma_map_ops instance and remove
implementation that purely are dead because the architecture doesn't
support noncoherent allocations
- add a flag for busses that need DMA configuration (Robin Murphy)
* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: turn dma_cache_sync into a dma_map_ops method
sh: make dma_cache_sync a no-op
xtensa: make dma_cache_sync a no-op
unicore32: make dma_cache_sync a no-op
powerpc: make dma_cache_sync a no-op
mn10300: make dma_cache_sync a no-op
microblaze: make dma_cache_sync a no-op
ia64: make dma_cache_sync a no-op
frv: make dma_cache_sync a no-op
x86: make dma_cache_sync a no-op
floppy: consolidate the dummy fd_cacheflush definition
drivers: flag buses which demand DMA configuration
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
The kexec/kdump tools need to know where the .bss is so it can be
included in the core dump. This allows vmcore-dmesg to have access to
the dmesg buffers of the crashed kernel as well as allowing the
debugger to examine variables in the bss section.
Add a request for the bss resource in addition to the already
requested code and data sections.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J. Hill <steven.hill@cavium.com>,
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17485/
Signed-off-by: James Hogan <jhogan@kernel.org>
__cmpxchg64_local_generic() is atomic only w.r.t tasks and interrupts
on the same CPU (that's what the 'local' means). We can't use it to
implement cmpxchg64() in SMP configurations.
So, for 32-bit SMP configurations:
- Don't define cmpxchg64()
- Don't enable HAVE_VIRT_CPU_ACCOUNTING_GEN, which requires it
Fixes: e2093c7b03 ("MIPS: Fall back to generic implementation of ...")
Fixes: bb877e96be ("MIPS: Add support for full dynticks CPU time accounting")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.1+
Patchwork: https://patchwork.linux-mips.org/patch/17413/
Signed-off-by: James Hogan <jhogan@kernel.org>
HW interrupts triggered when irq_disable() were being ignored. Enable
resending HW interrupts as SW interrupts.
This was causing an issue where the interrupts waking the system up from
a suspend state were not calling their interrupt handlers.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16116/
Signed-off-by: James Hogan <jhogan@kernel.org>
