As per review feedback by Tvrtko, added a check that no invalid bits
are being set in the whitelist flags fields.
Also updated the read/write access definitions to make it clearer that
they are an enum field not a set of single bit flags.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-2-John.C.Harrison@Intel.com
On TGL the port programming for combophy is very similar to ICL, so
adapt the callers to possibly use the different register values.
v2 (Lucas): Add TODO with about DPLL4 (requested by Ville)
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-21-lucas.demarchi@intel.com
Add default GPIO pin mapping for all ports. Tiger Lake has 3 combophy
ports and 6 TC ports, gpio pin1-3 are mapped to combophy & pin9-14 are
mapped to TC ports.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-18-lucas.demarchi@intel.com
Add power well 5 to support 4th pipe and transcoder on TGL.
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-10-lucas.demarchi@intel.com
The patch adds the new power wells introduced by TGL (GEN 12) and
maps these to existing/new power domains. The changes for GEN 12 wrt
to GEN 11 are the following:
- Transcoder#EDP removed from power well#1 (Transcoder#A used in
low-power mode instead)
- Transcoder#A is now backed by power well#1 instead of power well#3
- The DDI#B/C combo PHY ports are now backed by power well#1 instead of
power well#3
- New power well#5 added for pipe#D functionality (TODO)
- 2 additional TC ports (TC#5-6) backed by power well#3, 2 port
specific IO power wells (only for the non-TBT modes) and 4 port
specific AUX power wells (2-2 for TBT vs. non-TBT modes)
- Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for
eDP and MIPI DSI (TODO)
On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and
BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we
have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-B
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI#C-F
Starting from GEN 12 we have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-C
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI TC#1-6
To save some space in the power domain enum the power domain naming in
the driver reflects the above change, that is power domains TC#1-3 are
added as aliases for DDI#D-F and new power domains are reserved for
TC#4-6.
v2 (Lucas):
- Separate out the bits and definitions for TGL from the ICL ones.
Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since
we don't define TRANSCODER_A_VDSC power domain to spare a one bit in
the bitmask (suggested by Ville)
v3 (Lucas):
- Fix missing squashes on v2
- Rebase on renamed TRANSCODER_EDP_VDSC
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com
Convert the code that operates directly on gen11 combo PHY's to use the
new namespace. Combo PHY registers are those named "ICL_PORT_*" plus
ICL_DPHY_CHKN.
Note that a lot of the PHY programming happens in the MIPI DSI code.
For clarity I've added a for_each_dsi_phy() to loop over the phys used
by DSI. Since DSI always uses A & B on gen11, port=phy in all cases so
it doesn't actually matter which form we use in the DSI code. I've used
the phy iterator in code that's explicitly working with the combo PHY,
but left the rest of the DSI code using the port iterator and namespace
to minimize patch deltas. We can switch the rest of the DSI code over
to use phy terminology later if this winds up being too confusing.
v6: Drop an include of drm/i915_drm.h; that was previously included just
for the definition of 'enum port' which this patch removes the need
for. (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-4-matthew.d.roper@intel.com
Although the register name implies that it operates on DDI's,
DPCLKA_CFGCR0_ICL actually needs to be programmed according to the PHY
that's in use. I.e., when using EHL's DDI-D on combo PHY A, the bits
described as "port A" in the bspec are what we need to set. The bspec
clarifies:
"[For EHL] DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
Clock Select chooses the PLL for both DDIA and DDID and drives
port A in all cases."
Also, since the CNL DPCLKA_CFGCR0 bit defines are still port-based, we
create separate ICL-specific defines that accept the PHY rather than
trying to share the same bit definitions between CNL and ICL.
v5: Make icl_dpclka_cfgcr0_clk_off() take phy rather than port. When
splitting the original patch the hunk to handle this wound up too
late in the series. (Sparse)
v6: Since we're already changing this code,
s/DPCLKA_CFGCR0_ICL/ICL_DPCLKA_CFGCR0/ for consistency. (Jose)
Bspec: 33148
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-3-matthew.d.roper@intel.com
All sprite planes have a progammable gamma ramp. Set it up with
a linear ramp on all platforms. This actually matches the reset
value but soon we'll want to reprogram this ramp on some machines,
so let's just set it up across the board.
Note that on pre-IVB the hardware bypasses the gamma unit
unless a YCbCr pixel format is used.
v2: Add parens around << in ilk_linear_gamma()
Skip gamma programming for RGB on pre-IVB
s/DVSGAMC/DVSGAMC_G4X/
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-4-ville.syrjala@linux.intel.com
We don't currently have any use for the sprite gamma on ivb-bdw.
Let's disable it. We already do that on skl+.
On pre-ivb there is no way to disable the sprite gamma, and it
only affects YCbCr pixel formats, whereas on ivb+ it also
affects RGB formats.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703200824.5971-3-ville.syrjala@linux.intel.com
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)
Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)
Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
-----BEGIN PGP SIGNATURE-----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=hS8b
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-06-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)
Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)
Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v9x1lpdh.fsf@intel.com
The other additional step in the DSI sequence for EHL.
v2:
- Using REG_BIT()(Matt)
- Fixed commit message typo(Vandita)
BSpec: 20597
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619233134.20009-2-jose.souza@intel.com
EHL has 2 additional steps in the DSI sequence, this is one of then
the lane latency optimization for DW1.
BSpec: 20597
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619233134.20009-1-jose.souza@intel.com
EHL has a mux on combo PHY A that allows it to be driven either by an
internal display (DDI-A or DSI DPHY) or by an external display (DDI-D).
This is a motherboard design decision that can not be changed on the
fly. Unfortunately there are no strap registers that allow us to detect
the board configuration directly, so let's use the VBT to try to figure
it out and program the mux accordingly.
For now if we run across a broken VBT that tries to claim that PHY A
is attached to both internal and external displays at the same time,
we'll resolve the conflict in favor of the internal display. To help
debug these kind of bad VBT's, let's also add a quick DRM_DEBUG message
during child device parsing so that it's easier to understand these
cases if they show up in bug reports.
v2:
- Confirmed that VBT's dvo port refers to the DDI and not the PHY.
Thus we can check more explicitly for (ddi_d && !(ddi_a || dsi)). If
a bad VBT contradicts itself, let internal display win. (Ville)
v3:
- Switch condition from !IS_ICELAKE to IS_ELKHARTLAKE. Although the
convention is usually to assume that future platforms will inherit
all current platform behavior, this feels more like a one-platform
quirk. (Ville)
- Update commit message to describe what we do if/when we encounter
broken VBT's, and note that the new debug print during child device
parsing is intentional.
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618175131.9139-1-matthew.d.roper@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Newer hardware adds flags to the whitelist work-around register. These
allow per access direction privileges and ranges.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-2-John.C.Harrison@Intel.com
Add macros to define multi segmented gamma registers
V2: Addressed Ville's comments:
Add gen-lable before bit definition
Addressed Jani's comment
- Use REG_GENMASK() and REG_BIT()
V3: Addressed Ville's comments:
- Put comments at the end of line.
- Change the comment at start of ICL multisegmented gamma registers.
Added Ville's r-b
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-3-git-send-email-uma.shankar@intel.com
This chicken bit should be set before enabling FBC to avoid screen
corruption when the plane size has odd vertical and horizontal
dimensions. It is safe to leave the bit set even when FBC is disabled.
v2:
- The bspec's name for this bit on these platforms ("Spare 14") is
pretty meaningless. Let's rename the bit definition to something
that more accurately reflects what the bit really does. (Clint)
v3:
- The chicken register was already defined (along with a few other
gen9-specific bits) farther down. Just add the new bit definition
there. (Clint)
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612183631.30540-1-matthew.d.roper@intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
On non-ULT HSW the "special" WRPLL reference clock select
actually means non-SSC. Take that into account when reading
out the WRPLL state.
Also the non-SSC reference may be either 24MHz or 135MHz,
which we can read out from FUSE_STRAP3. The BDW docs actually
say: "also indicates whether the CPU and PCH are in a single
package or separate packages", so it may be that this is not
actually required and we could just assume 135 MHz (just like
the code already did). But it doesn't really hurt to read this
out as the HSW docs aren't quite so clear.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Give the PLL control register bits better names on HSW/BDW.
v2: Fix the copy paste fails in SPLL_REF defines (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610133609.27288-1-ville.syrjala@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Our PCH refclk init code currently assumes that the PCH SSC reference
can only be used for FDI. That is not true and it can be used by
SPLL/WRPLL for eDP SSC or clock bending as well. Before we go
reconfiguring it let's make sure no PLL is currently using the PCH
SSC reference.
For some reason the hw is not particularly upset about losing
the clock if we immediately follow up with a modeset. Can't
really explain why nothing times out during the crtc disable
at least, but that's what the logs say. With fastboot the
story is quite different and we lose the entire display if
we turn off the PCH SSC reference when it's still being used.
Since we totally skip configuring the PCH SSC reference it
may not be in the proper state for FDI. Hopefully that won't
be a problem in practice.
We really should move this code to be part of the modeset seqeuence
and properly deal with the potentially conflicting requirements
imposed on PLL reference clocks. But that requires actual work.
Let's toss in a TODO for that.
v2: Pimp the commit message with the fastboot vs. not
details
Cc: Julius B. <freedesktop@blln.gr>
Cc: Johannes Krampf <johannes.krampf@gmail.com>
Tested-by: Johannes Krampf <johannes.krampf@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108773
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.
Fixes: 95690a02fb ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com
(cherry picked from commit bf210f6c9e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch enables infoframes on GLK+ to be
used to send HDR metadata to HDMI sink.
v2: Addressed Shashank's review comment.
v3: Addressed Shashank's review comment.
v4: Added Shashank's RB.
v5: Dropped hdr_metadata_change check while modeset, as per
Ville's suggestion.
v6: Removed an unused and duplicate bit defintion, as per Ville's
comment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
[mlankhorst: Reorder patch series]
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558110145-3422-1-git-send-email-uma.shankar@intel.com
Starting Gen11 GuC shares interrupt registers with SG unit
instead of PM. But for now we don't care about SG interrupts.
v2: (Chris)
v3: rebased (Michal)
v4: more bspec pages, use macros, update commit msg (Michal Wi)
Bspec: 19820, 19840, 19841, 20176
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-13-michal.wajdeczko@intel.com
ICL has so many planes that it can easily exceed the maximum
effective memory bandwidth of the system. We must therefore check
that we don't exceed that limit.
The algorithm is very magic number heavy and lacks sufficient
explanation for now. We also have no sane way to query the
memory clock and timings, so we must rely on a combination of
raw readout from the memory controller and hardcoded assumptions.
The memory controller values obviously change as the system
jumps between the different SAGV points, so we try to stabilize
it first by disabling SAGV for the duration of the readout.
The utilized bandwidth is tracked via a device wide atomic
private object. That is actually not robust because we can't
afford to enforce strict global ordering between the pipes.
Thus I think I'll need to change this to simply chop up the
available bandwidth between all the active pipes. Each pipe
can then do whatever it wants as long as it doesn't exceed
its budget. That scheme will also require that we assume that
any number of planes could be active at any time.
TODO: make it robust and deal with all the open questions
v2: Sleep longer after disabling SAGV
v3: Poll for the dclk to get raised (seen it take 250ms!)
If the system has 2133MT/s memory then we pointlessly
wait one full second :(
v4: Use the new pcode interface to get the qgv points rather
that using hardcoded numbers
v5: Move the pcode stuff into intel_bw.c (Matt)
s/intel_sagv_info/intel_qgv_info/
Do the NV12/P010 as per spec for now (Matt)
s/IS_ICELAKE/IS_GEN11/
v6: Ignore bandwidth limits if the pcode query fails
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524153614.32410-1-ville.syrjala@linux.intel.com
Atm AUX-B transfers can fail with the following error if AUX-A is not
enabled:
[ 594.594108] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status 0x7c2003ff
[ 594.615854] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
[ 594.632851] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout!
[ 594.632915] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp_aux_ch not done status 0xac2003ff
[ 594.641786] ------------[ cut here ]------------
[ 594.641790] dp_aux_ch not started status 0xac2003ff
[ 594.641874] WARNING: CPU: 4 PID: 1366 at drivers/gpu/drm/i915/intel_dp.c:1268 intel_dp_aux_xfer+0x232/0x890 [i915]
Ville noticed this issue already earlier and managed to work around it
by keeping AUX-A always powered whenever AUX-B was used. He also
reported the issue to HW folks and they have now root caused the problem
and updated BSpec with a fix (see internal BSpec/Index/21257,
HSD/1607152412).
I noticed the same error - even with the WA being applied - while doing
AUX transfers with Chamelium being connected with a DP cable to the
source but letting Chamelium imitate an unplug. This is probably some
unstandard way on Chamelium's behalf of disconnecting itself from the
AUX pins. For instance it could still pull on the AUX pins which would
prevent the source from detecting AUX timeouts in the proper way,
leading to the ERRORs or WARNs seen in the logs in the Reference: bug
below.
In case I disconnect the sink properly (the cable itself, not via the
Chamelium unplug xmlrpc command) then the AUX timeout signaling works
properly and so there won't be any ERRORs/WARNs emitted.
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=110718
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524173532.6444-1-imre.deak@intel.com
REG_BIT() and REG_GENMASK() were intended to work with both constant
expressions and otherwise, with the former having extra compile time
checks for the bit ranges. Incredibly, the result of
__builtin_constant_p() is not an integer constant expression when given
a non-constant expression, leading to errors in BUILD_BUG_ON_ZERO().
Replace __builtin_constant_p() with the __is_constexpr() magic spell.
Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524185253.1088-1-jani.nikula@intel.com
With Sphinx 2.0 (or prior versions with the deprecation warnings fixed) the
docs build fails with:
Documentation/gpu/i915.rst:403: WARNING: Title level inconsistent:
Global GTT Fence Handling
~~~~~~~~~~~~~~~~~~~~~~~~~
reST markup error:
Documentation/gpu/i915.rst:403: (SEVERE/4) Title level inconsistent:
I "fixed" it by changing the subsections in i915.rst, but that didn't seem
like the correct change. It turns out that a couple of i915 files create
their own subsections in kerneldoc comments using apostrophes as the
heading marker:
Layout
''''''
That breaks the normal subsection marker ordering, and newer Sphinx is
rather more strict about enforcing that ordering. So fix the offending
comments to make Sphinx happy.
(This is unfortunate, in that kerneldoc comments shouldn't need to be aware
of where they might be included in the heading hierarchy, but I don't see
a better way around it).
Cc: stable@vger.kernel.org # v4.14+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Setting bit5 (headerless msg for preemptible GPGPU context) of SAMPLER_MODE
register to enable support for the headless msgs on gen11. None of existing
use cases will be affected by this as this change makes both types of
message - headerless and w/ header supported at the same time. It also
complies with the new recommendation for the default bit value for the
next gen.
v2: rewrote commit message to include more information
v3: setting the bit in icl_ctx_workarounds_init()
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425055005.21790-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
When YCBCR 4:2:0 outputs is used for DP, we should program YCBCR 4:2:0 to
MSA and VSC SDP.
As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of Color
Encoding Format and Content Color Gamut] while sending YCBCR 420 signals
we should program MSA MISC1 fields which indicate VSC SDP for the Pixel
Encoding/Colorimetry Format.
v2: Block comment style fix.
v6:
Fix an wrong setting of MSA MISC1 fields for Pixel Encoding/Colorimetry
Format indication. As per DP 1.4a spec Table 2-96 [MSA MISC1 and MISC0
Fields for Pixel Encoding/Colorimetry Format Indication]
When MISC1, bit 6, is Set to 1, a Source device uses a VSC SDP to
indicate the Pixel Encoding/Colorimetry Format. On the wrong version
it set a bit 5 of MISC1, now it set a bit 6 of MISC1.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-5-gwan-gyeong.mun@intel.com
Factor out the combo PHY lane power configuration code to a separate
helper; it will be also needed by the next patch adding the same
configuration for DDI ports.
Add support for DDI ports and lane reversal as preparation for the next
patch.
The PWR_DOWN_LN_1 value is unspecified in the BSpec register description
so remove it.
v2:
- Fix up the wrong assumption that the encodings are the same for DDI
and DSI ports. (Jani)
v3:
- Use intel_ instead of icl_ prefix. (Jani)
- Add required headers to intel_combo_phy.h after the upstream header
refactoring.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> (v2)
Link: https://patchwork.freedesktop.org/patch/msgid/20190425185253.3197-1-imre.deak@intel.com
s/pipe/transcoder/ when dealing with hsw+ audio registers. This
won't actually make any real difference since there is no audio
on the EDP transcoder. But this should avoid a bit of confusion
when cross checking against the spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190430142901.7302-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The pipe has a special HDR mode with higher precision when only
HDR planes are active. Let's use it.
Curiously this fixes the kms_color gamma/degamma tests when
using a HDR plane, which is always the case unless one hacks
the test to use an SDR plane. If one does hack the test to use
an SDR plane it does pass already.
I have no actual explanation how the output after the gamma
LUT can be different between the two modes. The way the tests
are written should mean that the output should be identical
between the solid color vs. the gradient. But clearly that
somehow doesn't hold true for the HDR planes in non-HDR pipe
mode. Anyways, as long as we stick to one type of plane the
test should produce sensible results now.
v2: s/HDR_MODE/HDR_MODE_PRECISION/ (Shashank)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412183009.8237-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Broadwater and the rest of gen4 do support being able to saving and
reloading context specific registers between contexts, providing isolation
of the basic GPU state (as programmable by userspace). This allows
userspace to assume that the GPU retains their state from one batch to the
next, minimising the amount of state it needs to reload and manually save
across batches.
v2: CONSTANT_BUFFER woes
Running through piglit turned up an interesting issue, a GPU hang inside
the context load. The context image includes the CONSTANT_BUFFER command
that loads an address into a on-gpu buffer, and the context load was
executing that immediately. However, since it was reading from the GTT
there is no guarantee that the GTT retains the same configuration as
when the context was saved, resulting in stray reads and a GPU hang.
Having tried issuing a CONSTANT_BUFFER (to disable the command) from the
ring before saving the context to no avail, we resort to patching out
the instruction inside the context image before loading.
This does impose that gen4 always reissues CONSTANT_BUFFER commands on
each batch, but due to the use of a shared GTT that was and will remain
a requirement.
v3: ECOSKPD to the rescue
Ville found the magic bit in the ECOSKPD to disable saving and restoring
the CONSTANT_BUFFER from the context image, thereby completely avoiding
the GPU hangs from chasing invalid pointers. This appears to be the
default behaviour for gen5, and so we just need to tweak gen4 to match.
v4: Fix spelling of ECOSKPD and discover it already exists
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419172720.5462-1-chris@chris-wilson.co.uk
This discussion started because we use token pasting in the
GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an
empty argument to those macros, making the code a little weird. The
original proposal was to just add a comment as the empty argument, but
Ville suggested we just add a prefix to the registers, and that indeed
sounds like a more elegant solution.
Now doing this is kinda against our rules for register naming since we
only add gens or platform names as register prefixes when the given
gen/platform changes a register that already existed before. On the
other hand, we have so many instances of IIR/IMR in comments that
adding a prefix would make the users of these register more easily
findable, in addition to make our token pasting macros actually
readable. So IMHO opening an exception here is worth it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-4-paulo.r.zanoni@intel.com
If cat error is set, we need to clear it by acking it. Further,
if it is set, we must not do a normal request for reset.
v2: avoid goto (Chris)
v3: comment, error format, direct assign (Chris)
Bspec: 12567
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165353.16432-1-mika.kuoppala@linux.intel.com
With gen11 the interrupt registers are shared between 2 engines,
with Engine1 instance being upper word and Engine0 instance being
lower. Annoyingly gen11 selected the pm interrupts to be in the
Engine1 instance.
Rectify the situation by shifting the access accordingly,
based on gen.
v2: comments, warn on overzealous rps_events
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=108059
Testcase: igt/i915_pm_rps@min-max-config-loaded
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-6-mika.kuoppala@linux.intel.com
