This patch adds FMC2 NAND controller support used by STM32MP SOCs.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.
In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:
- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
enabled by default bringing up the new graphics support.
Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
in the system.
- Set MUSB to PIO mode as this is the one working most stable
for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
driver to compile and link properly.
Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This refreshes the outdated U8500 defconfig: some options
moved around, PS/2 mouse is no longer default on, crypto
options moved around etc.
Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This addresses some assumptions made by systemd about having multiple
routing table support in the kernel. systemd-networkd will try and
provision mutliple routing tables + policies and will silently break
neighbor advertisement responses due to policy configurations on a
single table.
It also adds support for SLAAC based router settings and faster
duplicate address detection.
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=Ysfd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: configs: multi_v5: Remove duplicate ASPEED options
arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module
ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT
defconfig: arm64: enable i.MX8 SCU octop driver
arm64: defconfig: Add i.MX SCU SoC info driver
arm64: defconfig: Enable CONFIG_QORIQ_THERMAL
ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR
arm64: defconfig: ARM_IMX_CPUFREQ_DT=m
ARM: imx_v6_v7_defconfig: Add TPM PWM support by default
ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver
ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS
arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m
ARM: multi_v7_defconfig: enable STMFX pinctrl support
arm64 defconfig: enable LVM support
ARM: configs: multi_v5: Add more ASPEED devices
arm64: defconfig: Add Tegra194 PCIe driver
ARM: configs: aspeed: Add new drivers
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
arm64 defconfig: enable Mellanox cards
...
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus Walleij--
the SoC doesn't have active maintainers with hardware, and in
discussions with the vendor the agreement was that it's OK to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support.
-----BEGIN PGP SIGNATURE-----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=FX6e
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
- Add a "cut here" to make it clearer where oops dumps should be cut
from - we already have a marker for the end of the dumps.
- Add logging severity to show_pte()
- Drop unnecessary common-page-size linker flag
- Errata workarounds for Cortex A12 857271, Cortex A17 857272 and
Cortex A7 814220.
- Remove some unused variables that had started to provoke a compiler
warning.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ru/4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- Add a "cut here" to make it clearer where oops dumps should be cut
from - we already have a marker for the end of the dumps.
- Add logging severity to show_pte()
- Drop unnecessary common-page-size linker flag
- Errata workarounds for Cortex A12 857271, Cortex A17 857272 and
Cortex A7 814220.
- Remove some unused variables that had started to provoke a compiler
warning.
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8863/1: stm32: select ARM errata 814220
ARM: 8862/1: errata: 814220-B-Cache maintenance by set/way operations can execute out of order
ARM: 8865/1: mm: remove unused variables
ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores
ARM: 8861/1: errata: Workaround errata A12 857271 / A17 857272
ARM: 8860/1: VDSO: Drop implicit common-page-size linker flag
ARM: arrange show_pte() to issue severity-based messages
ARM: add "8<--- cut here ---" to kernel dumps
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
-----BEGIN PGP SIGNATURE-----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=WRDT
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.3
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
* tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
ARM: defconfig: samsung: Cleanup with savedefconfig
ARM: exynos_defconfig: Trim and reorganize with savedefconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
A recent change mistakenly added a second copy of these two options,
which kbuild warns about:
arch/arm/configs/multi_v5_defconfig:257:warning: override: reassigning
to symbol ASPEED_LPC_CTRL
arch/arm/configs/multi_v5_defconfig:258:warning: override: reassigning
to symbol ASPEED_LPC_SNOOP
Fixes: 2d8bf3404b ("ARM: configs: multi_v5: Add more ASPEED devices")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
The SNVS LPGPR hardware is present on several i.MX SoCs.
Select its driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the OV2680 camera driver as it is used on the imx7s-warp board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_THERMAL_STATISTICS to extend the sysfs interface
for thermal cooling devices and expose some useful statistics.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.
-----BEGIN PGP SIGNATURE-----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=YrwI
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED device tree updates for 5.3
Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.
* tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: multi_v5: Add more ASPEED devices
ARM: configs: aspeed: Add new drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables support for STMFX pinctrl.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Remove GENERIC_PHY from shmobile_defconfig as it is now selected
-----BEGIN PGP SIGNATURE-----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=UHQN
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.3
* Remove GENERIC_PHY from shmobile_defconfig as it is now selected
* tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove GENERIC_PHY from shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for USB networking
* Add support for display related options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hq9W
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.3
* Add support for USB networking
* Add support for display related options
* tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add support for USB networking
ARM: qcom_defconfig: add display-related options
Signed-off-by: Olof Johansson <olof@lixom.net>
Some big.LITTLE systems have I-Cache line size mismatch between
LITTLE and big cores. This patch adds a workaround for proper I-Cache
support on such systems. Without it, some class of the userspace code
(typically self-modifying) might suffer from random SIGILL failures.
Similar workaround already exists for ARM64 architecture. I has been
added by commit 116c81f427 ("arm64: Work around systems with mismatched
cache line sizes").
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This enables a handful of new drivers that have recently landed:
- Video caputre, for doing BMC virtual keyboard-video-mouse
- DRM driver for the BMC's own graphics device
- Error detection and correction
- P2A control, a BMC feature for moving data between the host and BMC
- RTC driver
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable support for Mali GPU with Panfrost and Lima drivers. Most of
Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable support for Mali GPU with Panfrost and Lima drivers. Most of
Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
As Mali GPU is quite popular among ARM vendors, other platforms will
benefit as well.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
A bunch of armv7 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the goal of making it easier for CI services such as KernelCI to
run tests for it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The CONFIG_BACKLIGHT_LCD_SUPPORT was removed in commit 8c5dc8d9f1
("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel
symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now
available directly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for USB networking as a module to qcom_defconfig since its
a useful feature to have for development purposes.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the CMA (Contiguous Memory Allocator) for the MSM DRM/KMS driver,
the simple panel, and the TI LM3630A driver in order to support the
display on the LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This sets CONFIG_CPUFREQ_DT=m in davinci_all_defconfig. This is used for
frequency scaling on device tree boards.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Run savedefconfig to cleanup and reorganize the configs. Most entries
are only moved around and few options disappear because of defaults.
However this removes the already disabled OSS Emulation and OSS
Sequencer API (SND_MIXER_OSS, SND_PCM_OSS, SND_SEQUENCER_OSS). These
were already disabled (hidden by missing SND_OSSEMUL and SND_SEQUENCER)
and are not strictly hardware related, therefore they are not necessary
for providing reference hardware config.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Compared to kernel 5.0, patches merged for 5.1 added support for A38x'
PHY guarded by a config option which was not enabled by default. As a
result, there was no eth1 and eth2 on a Solid Run Clearfog Base.
Ensure that A38x PHY is enabled on mvebu.
[gregory: issue appeared in 5.1 not in 5.2 and added Fixes tag]
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Fixes: a10c1c8191 ("net: marvell: neta: add comphy support")
Cc: stable@kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Trim and reorganize the defconfig with savedefconfig on latest
linux-next. The ARCH_EXYNOS3 is removed because it become the default.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
After discussing with the subarch maintainers and Hilscher,
we concluded that the netx subarchitecture (Netx 100/500)
is no longer maintained or tested, and noone will miss it
if we delete it. So delete it.
There is a newer Netx 4000 architecture which we may see
included at some point, but this will be supported using
the standard multiplatform and devicetree mechanisms and is
easier to develop from scratch.
Cc: Michael Trensch <MTrensch@hilscher.com>
Acked-By: Robert Schwebel <r.schwebel@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove the GENERIC_PHY config option from shmobile_defconfig, as it is
selected by PHY_RCAR_GEN3_USB2.
PHY_RCAR_GEN3_USB2 is enabled by the commit 0cd4f4f102
("ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig").
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that there is a board making use of this bus is available
enable the siox code to increase compile coverage.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx6q-logicpd board has a PCF8575 connected to it, so this
patch turns it on my default now.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is some material that we picked up into our tree late. Most of it
are smaller fixes and additions, some defconfig updates due to recent
development, etc.
Code-wise the largest portion is a series of PM updates for the at91
platform, and those have been in linux-next a while through the at91
tree before we picked them up.
-----BEGIN PGP SIGNATURE-----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=XCCp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Olof Johansson:
"This is some material that we picked up into our tree late. Most of it
are smaller fixes and additions, some defconfig updates due to recent
development, etc.
Code-wise the largest portion is a series of PM updates for the at91
platform, and those have been in linux-next a while through the at91
tree before we picked them up"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
arm64: dts: sprd: Add clock properties for serial devices
Opt out of scripts/get_maintainer.pl
ARM: ixp4xx: Remove duplicated include from common.c
soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
arm64: tegra: Disable XUSB support on Jetson TX2
arm64: tegra: Enable SMMU translation for PCI on Tegra186
arm64: tegra: Fix insecure SMMU users for Tegra186
arm64: tegra: Select ARM_GIC_PM
amba: tegra-ahb: Mark PM functions as __maybe_unused
ARM: dts: logicpd-som-lv: Fix MMC1 card detect
ARM: mvebu: drop return from void function
ARM: mvebu: prefix coprocessor operand with p
ARM: mvebu: drop unnecessary label
ARM: mvebu: fix a leaked reference by adding missing of_node_put
ARM: socfpga_defconfig: enable LTC2497
ARM: mvebu: kirkwood: remove error message when retrieving mac address
ARM: at91: sama5: make ov2640 as a module
ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
soc/fsl/qe: Fix an error code in qe_pin_request()
...
Pull thermal management updates from Zhang Rui:
- Remove the 'module' Kconfig option for thermal subsystem framework
because the thermal framework are required to be ready as early as
possible to avoid overheat at boot time (Daniel Lezcano)
- Fix a bug that thermal framework pokes disabled thermal zones upon
resume (Wei Wang)
- A couple of cleanups and trivial fixes on int340x thermal drivers
(Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: processor_thermal: Downgrade error message
mlxsw: Remove obsolete dependency on THERMAL=m
hwmon/drivers/core: Simplify complex dependency
thermal/drivers/core: Fix typo in the option name
thermal/drivers/core: Remove depends on THERMAL in Kconfig
thermal/drivers/core: Remove module unload code
thermal/drivers/core: Remove the module Kconfig's option
thermal: core: skip update disabled thermal zones after suspend
thermal: make device_register's type argument const
thermal: intel: int340x: processor_thermal_device: simplify to get driver data
thermal/int3403_thermal: favor _TMP instead of PTYP
- ov2640 driver as module
- selecting HAVE_FB_ATMEL for SAMA5 SoCs is useless
-----BEGIN PGP SIGNATURE-----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=ioJR
-----END PGP SIGNATURE-----
Merge tag 'at91-5.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late
AT91 defconfig for 5.2
- ov2640 driver as module
- selecting HAVE_FB_ATMEL for SAMA5 SoCs is useless
* tag 'at91-5.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: sama5: make ov2640 as a module
ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
Signed-off-by: Olof Johansson <olof@lixom.net>
arm32 socfpga_defconfig updates for v5.2
- Enable LTC2497 driver
- Enable support for large block devices
* tag 'socfpga_arm32_defconfig_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: enable LTC2497
ARM: socfpga_defconfig: enable support for large block devices
Signed-off-by: Olof Johansson <olof@lixom.net>
- Mostly the usual churn due to options being reordered or not added
in the right locations.
- Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out.
-----BEGIN PGP SIGNATURE-----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=IKfA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
-----BEGIN PGP SIGNATURE-----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=55X1
-----END PGP SIGNATURE-----
Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged
Immutable branch between MFD, ARM and Net due for the 5.2 merge window
MTD core changes:
- New AFS partition parser
- Update MAINTAINERS entry
- Use of fall-throughs markers
NAND core changes:
- Support having the bad block markers in either the first, second or
last page of a block. The combination of all three location is now
possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
check the proposed bindings. First platform to be fully supported:
sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
several helpers and the removal of the struct nand_chip from generic
functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.
Raw NAND controller drivers changes:
- nandsim:
* Switch to ->exec-op().
- meson:
* Misc cleanups and fixes.
* New OOB layout.
- Sunxi:
* A23/A33 NAND DMA support.
- Ingenic:
* Full reorganization and cleanup.
* Clear separation between NAND controller and ECC engine.
* Support JZ4740 an JZ4725B.
- Denali:
* Clear controller/chip separation.
* ->exec_op() migration.
* Various cleanups.
- fsl_elbc:
* Enable software ECC support.
- Atmel:
* Sam9x60 support.
- GPMI:
* Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
SPI NOR core changes:
- Print all JEDEC ID bytes on error
- Fix comment of spi_nor_find_best_erase_type()
- Add region locking flags for s25fl512s
SPI NOR controller drivers changes:
- intel-spi:
* Avoid crossing 4K address boundary on read/write
* Add support for Intel Comet Lake SPI serial flash
-----BEGIN PGP SIGNATURE-----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=HXap
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- New AFS partition parser
- Update MAINTAINERS entry
- Use of fall-throughs markers
NAND core changes:
- Support having the bad block markers in either the first, second or
last page of a block. The combination of all three location is now
possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
check the proposed bindings. First platform to be fully supported:
sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
several helpers and the removal of the struct nand_chip from
generic functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.
Raw NAND controller drivers changes:
- nandsim:
- Switch to ->exec-op().
- meson:
- Misc cleanups and fixes.
- New OOB layout.
- Sunxi:
- A23/A33 NAND DMA support.
- Ingenic:
- Full reorganization and cleanup.
- Clear separation between NAND controller and ECC engine.
- Support JZ4740 an JZ4725B.
- Denali:
- Clear controller/chip separation.
- ->exec_op() migration.
- Various cleanups.
- fsl_elbc:
- Enable software ECC support.
- Atmel:
- Sam9x60 support.
- GPMI:
- Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
SPI NOR core changes:
- Print all JEDEC ID bytes on error
- Fix comment of spi_nor_find_best_erase_type()
- Add region locking flags for s25fl512s
SPI NOR controller drivers changes:
- intel-spi:
- Avoid crossing 4K address boundary on read/write
- Add support for Intel Comet Lake SPI serial flash"
* tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
mtd: part: fix incorrect format specifier for an unsigned long long
mtd: lpddr_cmds: Mark expected switch fall-through
mtd: phram: Mark expected switch fall-throughs
mtd: cfi_cmdset_0002: Mark expected switch fall-throughs
mtd: cfi_util: mark expected switch fall-throughs
MAINTAINERS: MTD Git repository is hosted on kernel.org
MAINTAINERS: Update jffs2 entry
mtd: afs: add v2 partition parsing
mtd: afs: factor the IIS read into partition parser
mtd: afs: factor footer parsing into the v1 part parsing
mtd: factor out v1 partition parsing
mtd: afs: simplify partition detection
mtd: afs: simplify partition parsing
mtd: partitions: Add OF support to AFS partitions
mtd: partitions: Add AFS partitions DT bindings
mtd: afs: Move AFS partition parser to parsers subdir
mtd: maps: Make uclinux_ram_map static
mtd: maps: Allow MTD_PHYSMAP with MTD_RAM
MAINTAINERS: Add myself as MTD maintainer
MAINTAINERS: Remove my name from the MTD and NAND entries
...
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to
be handled consistently. Unsurprisingly, we enforce the lines to
be either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone
does, so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed.
Such nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs
and outputs at the same time and after improving the MMIO library
we handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM
work as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update.
-----BEGIN PGP SIGNATURE-----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=rhto
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
later than usual because I was ironing out my own mistakes. I'm
holding some stuff back for the next kernel as a result, and this
should be a healthy and well tested batch.
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to be
handled consistently. Unsurprisingly, we enforce the lines to be
either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone does,
so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed. Such
nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs and
outputs at the same time and after improving the MMIO library we
handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM work
as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update"
* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: Update documentation
docs: gpio: convert docs to ReST and rename to *.rst
gpio: sch: Remove write-only core_base
gpio: pxa: Make two symbols static
gpiolib: acpi: Respect pin bias setting
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
gpiolib: acpi: Set pin value, based on bias, more accurately
gpiolib: acpi: Change type of dflags
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
gpiolib: Make use of enum gpio_lookup_flags consistent
gpiolib: Indent entry values of enum gpio_lookup_flags
gpio: pca953x: add support for pca6416
dt-bindings: gpio: pca953x: document the nxp,pca6416
gpio: pca953x: add pcal6416 to the of_device_id table
gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
tracing: stop making gpio tracing configurable
gpio: pca953x: Configure wake-up path when wake-up is enabled
gpio: of: Optimize quirk checks
gpio: mmio: Drop bgpio_dir_inverted
...
The module support for the thermal subsystem makes little sense:
- some subsystems relying on it are not modules, thus forcing the
framework to be compiled in
- it is compiled in for almost every configs, the remaining ones
are a few platforms where I don't see why we can not switch the thermal
to 'y'. The drivers can stay in tristate.
- platforms need the thermal to be ready as soon as possible at boot time
in order to mitigate
Usually the subsystems framework are compiled-in and the plugs are as
module.
Remove the module option. The removal of the module related dead code will
come after this patch gets in or is acked.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <groeck@chromium.org>
For mini2440:
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
- Support having the bad block markers in either the first, second or
last page of a block. The combination of all three location is now
possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
check the proposed bindings. First platform to be fully supported:
sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
several helpers and the removal of the struct nand_chip from generic
functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.
Raw NAND controller drivers changes:
- nandsim:
* Switch to ->exec-op().
- meson:
* Misc cleanups and fixes.
* New OOB layout.
- Sunxi:
* A23/A33 NAND DMA support.
- Ingenic:
* Full reorganization and cleanup.
* Clear separation between NAND controller and ECC engine.
* Support JZ4740 an JZ4725B.
- Denali:
* Clear controller/chip separation.
* ->exec_op() migration.
* Various cleanups.
- fsl_elbc:
* Enable software ECC support.
- Atmel:
* Sam9x60 support.
- GPMI:
* Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAly4rnMACgkQJWrqGEe9
VoSBzAgAmSx1rDxiX2033dhVvufCcqMQnkY1fguKo69lYkhgGI1EYwvq2NbGLCf4
rb7n+D1peYhzH/9GKz4/LPQPccoVIQnx9+Z+JMZRzyQ+Z73cuomX/DtQO0AsRZgE
bx88vsbQFtjWv0mVluIEs51e3B/4ya6KPotxUDcaAyp2s/VKPaEI1rpiteUx8lZC
QsPsYQG/ryYiBW0cmopRL6c7ZdXyWi5A0kEdypGyO8ybTxo8xBquFqhbraDlM4U2
2H3Ii3iV9HoVTyjG2nGIA094Ak0U029oWW+P9xAPf1L4z6WIVXD68sazpZng+t8s
HgWP7BYDpcdRj+/Dm1b+uoaJH1fvOQ==
=B7w9
-----END PGP SIGNATURE-----
Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
NAND core changes:
- Support having the bad block markers in either the first, second or
last page of a block. The combination of all three location is now
possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
check the proposed bindings. First platform to be fully supported:
sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
several helpers and the removal of the struct nand_chip from generic
functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.
Raw NAND controller drivers changes:
- nandsim:
* Switch to ->exec-op().
- meson:
* Misc cleanups and fixes.
* New OOB layout.
- Sunxi:
* A23/A33 NAND DMA support.
- Ingenic:
* Full reorganization and cleanup.
* Clear separation between NAND controller and ECC engine.
* Support JZ4740 an JZ4725B.
- Denali:
* Clear controller/chip separation.
* ->exec_op() migration.
* Various cleanups.
- fsl_elbc:
* Enable software ECC support.
- Atmel:
* Sam9x60 support.
- GPMI:
* Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAly/imcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQWfCACONa1ojh4GcDtHASYQgnabbBwM67bDX6Du
vnHj741X9nfyAd2cL1NC1ejTne0OVC9/5J1z7KkYiNejqk/7RzFDBM3yVPgxmv+z
xrpJ/O/3rRAJuiuM6dTxswMOVNm8YdR//bvXOkMqakgAWxlShp0rzDhVng4rEjjE
RsvNkeZm1cEy5owfmhIr6kKzT7k6edINgEUR3cJa3+yu0HplXYCIWhZUhIcDcGnK
Fqazr6K3h3i3/fhoTOC1I64LvjRVoN5/ivi9OoFAEfXVm+cIVq7XWoYKeFWt4ECW
+JwEdEH2RgY7kXIqUjcs2/pf+W4emtxTjL/CJwNraKgxYcPMhEpI
=NkpX
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-defconfig32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig
Enable more options needed by Veyron Chromebooks.
* tag 'v5.2-rockchip-defconfig32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable options for LG Nexus 5 phone
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hdsl
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.2
* Enable options for LG Nexus 5 phone
* tag 'qcom-defconfig-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: add options for LG Nexus 5 phone
Signed-off-by: Olof Johansson <olof@lixom.net>
shmobile and multi_v7 defconfigs
* Enable support for CFI NOR FLASH
shmobile defconfig
* Enable USB [EO]HCI HCD PLATFORM and PHY_RCAR_GEN3_USB2
* Refresh for v5.1-rc1
-----BEGIN PGP SIGNATURE-----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=53pJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.2
shmobile and multi_v7 defconfigs
* Enable support for CFI NOR FLASH
shmobile defconfig
* Enable USB [EO]HCI HCD PLATFORM and PHY_RCAR_GEN3_USB2
* Refresh for v5.1-rc1
* tag 'renesas-arm-defconfig-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Trusted Foundations support in the default configurations for
Tegra and multi-v7. This is necessary because the symbol is no longer
selected by default.
-----BEGIN PGP SIGNATURE-----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=EcXx
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration updates for v5.2-rc1
Enable Trusted Foundations support in the default configurations for
Tegra and multi-v7. This is necessary because the symbol is no longer
selected by default.
* tag 'tegra-for-5.2-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of two patches first updates multi_v7_defconfig for
dropped options, and then updates it for moved options. We want to
do this on regular basis to make it easier to patch multi_v7_defconfig
without introducing errors and merge conflicts. We update the defconfig
in two patches to make sure we're not accidentally losing any needed
options.
After this, updating multi_v7_defconfig will become trivial, and most
likely only a small follow-up patches are needed after the merge window
to update it again for moved options.
-----BEGIN PGP SIGNATURE-----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=c2Tr
-----END PGP SIGNATURE-----
Merge tag 'multi-v7-defconfig-for-v5.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Update multi_v7_defconfig for dropped and moved options
This series of two patches first updates multi_v7_defconfig for
dropped options, and then updates it for moved options. We want to
do this on regular basis to make it easier to patch multi_v7_defconfig
without introducing errors and merge conflicts. We update the defconfig
in two patches to make sure we're not accidentally losing any needed
options.
After this, updating multi_v7_defconfig will become trivial, and most
likely only a small follow-up patches are needed after the merge window
to update it again for moved options.
* tag 'multi-v7-defconfig-for-v5.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Cleanup in mach code.
2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
with Odroid XU3/XU4/HC1 family). Finally this brings a working S2R
on these Odroid boards (still other drivers might have some issues
but mach code seems to be finished).
3. Require MCPM for Exynos542x boards because otherwise not all of cores
will come online.
4. GPIO regulator cleanup on S3C6410 Craig.
-----BEGIN PGP SIGNATURE-----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=v6It
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.2
1. Cleanup in mach code.
2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
with Odroid XU3/XU4/HC1 family). Finally this brings a working S2R
on these Odroid boards (still other drivers might have some issues
but mach code seems to be finished).
3. Require MCPM for Exynos542x boards because otherwise not all of cores
will come online.
4. GPIO regulator cleanup on S3C6410 Craig.
* tag 'samsung-soc-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: Tidy up handling of regulator GPIO lookups
ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs
ARM: exynos: Fix infinite loops on CPU powerup failure
ARM: exynos: Fix a leaked reference by adding missing of_node_put
ARM: exynos: Fix undefined instruction during Exynos5422 resume
ARM: exynos: Add CPU state management for Exynos542x under secure firmware
ARM: exynos: Add Exynos SMC values for secure memory write
ARM: exynos: Move Exynos542x CPU state reset to pm_prepare()
Signed-off-by: Olof Johansson <olof@lixom.net>
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the LTC2497 driver to support the two LTC2497's that are on
the SoCFPGA Arria10 Devkit.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable following drivers for merged devices:
- Batteries with BQ27XXX chips for Minnie boards.
- Elan eKTH I2C touchscreen for Minnie boards.
- GPIO charger for all Veyron boards.
- Rockchip SARADC driver for all rk3288 boards.
- Rockchip eFUSE driver for all rk3288 boards.
- TPM security chip for all Veyron boards.
- ChromeOS EC userspace interface for all chromebooks boards.
- ChromeOS EC light and proximity sensors for some chromebooks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
OV2640 is a detachable camera that we use to test the
Image Sensor Interface. Make it as a module, it will reduce
the kernel image size.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The software Hamming ECC correction implementation is referred as
MTD_NAND_ECC which is too generic. Rename it
MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an
SMC quirk in the Hamming implementation as
MTD_NAND_ECC_SW_HAMMING_SMC.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There is no point in having two distinct entries, merge them and
rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some 32-bit Tegra devices supported by the multiplatform ARM v7 default
configuration ship with the Trusted Foundations firmware. Enable support
for it by default.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Support for the Trusted Foundations firmware was recently moved outside
of arch/arm and now needs to be selected explicitly. Since some 32-bit
Tegra devices use this firmware, enable support for it in the default
configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Most of the changes here are just symbols that are now enabled by
default, have been removed, or which have been moved around and now
appear in a different spot.
The only notable change here is that BACKLIGHT_CLASS_DEVICE is now
built-in. This is to allow BACKLIGHT_PWM to be built-in as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These options have just moved around, let's update with make
savedefconfig to make patching the file easier.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These are mostly automatically selected with make multi_v7_defconfig,
except for SH_DMAE which is selected only by sound/soc/sh/Kconfig.
Then CONFIG_SND_SIMPLE_SCU_CARD no longer exists at all.
And CONFIG_SOC_CAMERA and CONFIG_SOC_CAMERA_PLATFORM are tagged
to depend on BROKEN, so we can drop them.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The USB [EO]HCI controller on RZ/G1C SoC doesn't have PCI bridge like
other R-Car Gen2 devices. So enable generic USB [EO]HCI HCD PLATFORM
support in shmobile_defconfig.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig so that boards
based on RZ/G1C SoC design can use the corresponding driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Support for Exynos5420/5422/5800 SoCs requires MCPM to properly boot all
CPU cores on all currectly supported platforms: Peach Pit (Exynos5420),
Odroid XU3/XU3lite/XU4/HC1 (Exynos5422) and Peach Pi (Exynos5800).
Without it some CPU cores fail to come online. Remove then the ability to
disable MCPM and make it mandatory when Exynos542x/5800 support is
enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add wcn36xx wireless, msm vibrator, pm8941 power key, bq24190 charger,
spmi-iadc, spmi-vadc, mpu6515 gyroscope / accelerometer, and tsl2772
proximity / light drivers as modules to support the LG Nexus 5
(hammerhead) phone.
CFG80211 is changed to be a module to match MAC80211 since this isn't
required for initial bootup.
Device manager support is also added as a module since this is needed by
postmarketOS.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
gpio tracing was made configurable in 4.4-rc1 (commit ddd70280bf
("tracing: gpio: Add Kconfig option for enabling/disabling trace
events")). Since then it is the only event type that can be compiled
conditionally. Given that there is only little overhead I don't
understand the reasoning and I was annoyed more than once that gpio
events were not available without recompiling.
So drop the Kconfig symbol and make gpio events available
unconditionally.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures. These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time. Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.
Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable the config options needed to access the CFI NOR FLASH on the
APE6EVM board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the config options needed to access the CFI NOR FLASH on the
APE6EVM board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update the defconfig for Renesas ARM boards:
- Move CMA-related config options (moved in commit ddb26d8e1e
("dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig"),
- Drop CONFIG_DRM_RCAR_LVDS=y (auto-enabled since commit
02f2b30032 ("drm: rcar-du: lvds: Add API to enable/disable
clock output")),
- Drop CONFIG_SND_SIMPLE_SCU_CARD=y (removed in commit
c8ed6aca6b ("ASoC: simple-scu-card: remove simple-scu-card")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add System Manager driver by default for SOCFPGA ARM32 platforms.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
With the SAR ADC driver ADC measurements can be taken though the IIO
framework. Additionally the SAR ADC has a channel which is connected to
an internal temperature sensor. The calibration data for this internal
temperature sensor is stored in the eFuse.
Enable the SAR ADC driver and the eFuse driver for the 32-bit Amlogic
Meson SoCs so we can expose the chip temperature to userspace through
the IIO hwmon driver (whose config option is already enabled:
CONFIG_SENSORS_IIO_HWMON=y).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable CONFIG_LBDAF, which is required by ext4 fs. This option could
handle both ext3 and ext4, with ext4 requires this option to be enabled,
otherwise the filesystem is mounted RO mode.
Since the LBDAF is enabled by default for 32-bit systems, simply
removing the current "not set" entry enables the support.
Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
While there is no mainline board that makes use of the PWM still enable the
driver for it to increase compile test coverage.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After the pwm-imx driver was split into two drivers and the Kconfig symbol
changed accordingly, use the new name to continue being able to use the
PWM hardware.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This Kconfig option was removed during v4.19 development in commit
771c035372 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.
FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------
Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips
made by Socionext and previously Matsushita/Panasonic based on their
own mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes
with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit.
For the moment, the TPU is not accessible in mainline Linux, so
we treat it as a generic Arm SoC.
More information is available at https://www.sophon.ai/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HQS8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
We regenerated the defconfig files for samsung, shmobile, lpc18xx,
lpc32xx, omap2, and nhk8815.
Lots of additional drivers added on samsung and nhk8815,
as well as the new pl110 driver on all machines that have it.
The remaining changes are mostly to enable newly added drivers,
and in case of imx8mq together with the SoC getting merged.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YWHu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"We regenerated the defconfig files for samsung, shmobile, lpc18xx,
lpc32xx, omap2, and nhk8815.
Lots of additional drivers added on samsung and nhk8815, as well as
the new pl110 driver on all machines that have it.
The remaining changes are mostly to enable newly added drivers, and in
case of imx8mq together with the SoC getting merged"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: spear3xx_defconfig: Activate PL111 DRM driver
ARM: nhk8815_defconfig: Add new options
ARM: nhk8815_defconfig: Update defconfig
ARM: pxa: remove CONFIG_SND_PXA2XX_AC97 in pxa_defconfig
ARM: defconfig: integrator: Switch to DRM
arm64: defconfig: Add IMX2+ watchdog
arm64: defconfig: Enable PFUZE100 regulator
arm64: defconfig: enable NXP FlexSPI driver
arm64: defconfig: Add i.MX8MQ boot necessary configs
arm64: defconfig: add imx8qxp support
arm64: defconfig: add i.MX system controller RTC support
arm64: defconfig: Enable Tegra TCU
arm64: defconfig: Enable MAX8973 regulator
ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option
ARM: defconfig: lpc32xx: enable DRM simple panel driver
ARM: defconfig: lpc32xx: enable fixed voltage regulator support
arm64: defconfig: Enable SUN6I Camera sensor interface
arm64: defconfig: Enable I2C_GPIO
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Update for dropped options
...
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds the minimal defconfig for the Milbeaut M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This disables the old FBDEV driver and enables the PL111
DRM driver on the SPEAr3xx.
There are some device trees in the kernel that switches
the DT node for the PL110 to "okay" but none of these
have any display defined, so we can safely switch to this
driver before we get any users starting to define
displays. Let them do it on top of the new driver
infrastructure instead.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the NHK8815 defconfig to reflect the recent
structural changes in Kconfigs all over the kernel:
- PREEMPT option was moved around
- MODULES options were moved around
- MTD_NAND options were moved around
- INPUT_MOUSEDEV doesn't have to be explicitly unselected
anymore (not on by default)
- DEBUG_GPIO should really not be in any default config
- MMC_BLOCK_BOUNCE is gone from Kconfig
- CRYPTO options were moved around
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_PXA2XX_AC97 driver is for the old AC97 bus implementation,
and conflicts with all the new-style AC97 drivers after the conversion,
so the drivers we want all get turned off.
Not disabling the symbol however does the right thing, and we get
the drivers that are selectively enabled here.
Fixes: 25540f68c8 ("ASoC: pxa: change ac97 dependencies")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This switches the ARM Integrator to use the new PL11x DRM
driver. We need CMA enabled to get coherent allocations
at all times. The dumb VGA DAC bridge is needed for
the VGA output on the reference designs, and backlight
is needed when using an external display.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).
-----BEGIN PGP SIGNATURE-----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=78iS
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.1
Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).
* tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s5pv210_defconfig: Enable cpufreq
ARM: s5pv210_defconfig: Enable more drivers present on Samsung Aries
ARM: s5pv210_defconfig: Run make savedefconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
-----BEGIN PGP SIGNATURE-----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=uhZ9
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
* tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.
-----BEGIN PGP SIGNATURE-----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=nR4K
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/defconfig
ARM: lpc32xx: defconfig updates for v5.1
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.
* tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: defconfig: lpc32xx: enable DRM simple panel driver
ARM: defconfig: lpc32xx: enable fixed voltage regulator support
ARM: defconfig: lpc32xx: disable superfluous GPIO controllers
ARM: defconfig: lpc32xx: enable generic SRAM driver
ARM: defconfig: lpc32xx: enable serial console on HS UART
ARM: defconfig: lpc32xx: enable panic on oops option
ARM: defconfig: lpc32xx: enable build options for basic debugging
ARM: defconfig: lpc32xx: enable NFSv4 support
ARM: defconfig: Switch LPC32xx to use PL11x DRM driver
ARM: defconfig: Update LPC32xx defconfig
ARM: defconfig: Switch LPC18xx to use PL11x DRM driver
ARM: defconfig: Update LPC18xx defconfig
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
-----BEGIN PGP SIGNATURE-----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=8/bA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.1
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
* tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Refresh for v5.0-rc1
ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.
Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.
-----BEGIN PGP SIGNATURE-----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=Cia+
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.
Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.
* tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Phytec phyCORE-LPC3250 board is equipped with a Sharp LQ035Q7DB03
3.5" QVGA TFT panel, enable simple panel device driver to get it
supported in the kernel image by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixed voltage regulators are found on Phytec phyCORE-LPC3250 board,
enable the correspondent device driver by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
These options have just moved around, let's update with make
savedefconfig to make patching the file easier.
Signed-off-by: Tony Lindgren <tony@atomide.com>
PROVE_LOCKING enables LOCKDEP, which causes big overhead on cache and
bus transactions.
On some ARM big.LITTLE architecutres (Exynos 5433) the overhead is really big.
The overhead can be measures using hackbench which will speed up
by x3 times (11sec -> 3.4sec).
When you check transaction on cache or buses, the results are way higher
than normal for the same hackbench test:
L1d cache invalidations: 26mln vs 4mln
L2u cache invalidations: 42mln vs 12mln
bus cyc/access: 30cyc/access vs. 20cyc/access
context switch is x3 times cheaper
Enable this option only when you have some locking issue to investigate.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the base GCC plugin support symbol CONFIG_GCC_PLUGINS for
multi_v7_defconfig so that builds hosted on systems that have a
supported version of GCC along with the prerequisite headers will
allow GCC plugins to be used during the build. At the moment, this
will also enable the ARM per-task stack protector plugin, since
all its remaining Kconfig dependencies are fulfilled by default.
At the same time, enable the structleak plugin. This plugin ensures
that local struct type variables are fully initialized, preventing
inadvertent leaks of kernel state if such variables are shared with
userland. This is a reasonable transformation to apply by default,
since it does not adversely affect performance, and does not affect
GCC compiler diagnostics regarding the use of uninitialized local
variables.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This switches the ARMv7 defconfig away from the old
fbdev driver to the new DRM driver. All machines are
now supported by the new driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The defconfig for the AXM55xx includes the ARM CLCD
(PL11x) PrimeCell framebuffer driver, but the device tree
for this platform does not include this hardware, nor do I
find it likely that this chip has graphics.
Drop these config items.
Cc: John Logan <john.logan@intel.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The change disables a list of GPIO controllers, which to the best
knowledge are not found on any supported NXP LPC32xx powered board.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
NXP LPC32xx SoCs contain an IRAM area, which is supported by
the generic MMIO SRAM driver, enable the driver to be built
by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
It is possible to configure NXP LPC32xx powered boards to have
serial consoles on HS UARTs, enable this option by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
To make a default built kernel image more advanced include support
of sysrq, dynamic debug, GDB scripts and printed timestamps in
kernel log buffer by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
None of the LPC32xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) left
as "disabled" on lpc3250-ea3250 and "okay" on lpc3250-phy3250
but no panels are attached on any device tree, so the driver
will simply bail out.
I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C as selected by DRM; fixed SoC name]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This simply updates the LPC32xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
None of the LPC18xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) set
as "disabled" and no panels are attached on any device tree.
This I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C build option as selected by DRM]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This simply updates the LPC18xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Enable cpufreq drivers for all S5Pv210 devices.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable following drivers for Samsung Aries family of devices:
- I2C support (using s3c2410 driver)
- s5p-jpeg
- s5p-mfc
- Exynos DRM rotator
- PWM support
- PWM vibrator
- Fixed regulator
- Syscon poweroff
- Atmel maXTouch touchscreen
- Broadcom BCM4329 Bluetooth over UART0
- DMA devices (so we can use pl330 DMA driver)
Disable DEBUG_LL. It's currently set to UART1, but if we want to use it
on Aries, we would need to switch it to UART2, to get any logs.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Run savedefconfig to cleanup the config and prepare for enabling more
drivers for Samsung Aries based devices.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
These boards are now fully ported to device-tree, so the old implementation
can go away.
The defconfig needs downstream quirks anyway, so we can just remove it from
mainline.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase
hardware support enable the driver in the multi_v7_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase hardware
support enable the driver in the shmobile_defconfig multiplatform
configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a build
fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
GPU, 256MB RAM, Wifi). This includes some acked platform-specific
drivers (serial, etc). This also include DTs for two boards with this
SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs.
-----BEGIN PGP SIGNATURE-----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=qgZw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Most changes here are to enable new drivers and platforms in the various
configs that affect them. Most of these have been covered and described
in the other branches, we mostly keep defconfig separate to avoid
conflicts between SoC/dt/driver updates that they otherwise would be
grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of ttyO*.
This change was already done for omap2_defconfig a while back, so most
users of these configs have either already updated, or can easily follow
the same patterns as they did at that time. This makes platform support
slightly easier for distros, since they no longer need to keep track of
a separate console prefix for these platforms.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqg+4PHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3nHcQAKrzSPsi3NWZHAIyP9Gcsu/mqebeB7ATnUVB
EfsYl+0ZLwZjex2pI7YmDih4QgOui3caOYU3rlqcu+zTSXYp03GnzA/fuW/aOBr3
Y4UYQcUIJULJyYzE14y5MhYxMfedF5U4yfayQj/6Xn4dojSICb19/CxD7lEtxUBQ
DqYizTnR5ABRVDnRXmgo0TcHCSa05xP5Hn48DL02fJUc1oHzv3RoH2MrC4j4a2QO
k0INYeq9cRFv9kcuz4S0VRXDvpA6cLsa9RZ8I3eJ+tpDFK8HmNyrij98CQLBwb/S
UzuC+DvD5MdJsf6Tp15enXIKtLKBtEQiXVncX5dCFLGW+lfZb0FyMa6Q4herGEL3
NLifwcxDwiATKJkGuQKJHhCnMVGanUz+fn+7nXbHtloOsR/2ttofaTFCCURN0Pr+
oIa79JSd58SES+Rqz7V17r08SuK5iMjF8XENDMuim095WIt2ysoKW7P11eq/CjNf
qheaiBK/ANHeYaVLb6OG7V5SMjsxWYcUfvwONiA5Qs1HbjiOXamUBOAiBF8zMBZc
rd21X2kqVpfU/IDgqhWTEawtl76gh9+1uCbbL5l+qiwyFfRw0b/9pakMs3szgD+v
2w49p/WwOQQoxzV5jCBlo36ZzKISrKGnTEQhRadtxCPPnrg/8emUNU6S/aHB2OmH
x1Vehuja
=65qL
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Most changes here are to enable new drivers and platforms in the
various configs that affect them. Most of these have been covered and
described in the other branches, we mostly keep defconfig separate to
avoid conflicts between SoC/dt/driver updates that they otherwise
would be grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of
ttyO*. This change was already done for omap2_defconfig a while back,
so most users of these configs have either already updated, or can
easily follow the same patterns as they did at that time. This makes
platform support slightly easier for distros, since they no longer
need to keep track of a separate console prefix for these platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
arm64: defconfig: Regenerate for v4.20
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: multi_v7_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: exynos_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
arm64: defconfig: Enable GCC and PINCTRL for MSM8998
arm64: defconfig: Enable core Qualcomm SDM845 options
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
arm64: defconfig: Enable some qcom remoteproc configs
arm64: defconfig: Enable QCS404 configs
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
...
Use the new options for default audio support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No audio support is enabled by default via ASoC, disable the code as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new options for default audio support and enable Nokia n900 audio
as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
- Enable build of i.MX7ULP SoC support.
- Enable Goodix touchscreen driver which is needed by ConnectCore 6UL
SBC Pro (ccimx6ulsbcpro) board support.
- Enable USB_ANNOUNCE_NEW_DEVICES to help USB issue debugging and
BT_BNEP to support network over bluetooth.
- Remove explicit ARM_UNWIND disabling as it's selected by ARM EABI
support.
- Enable DA9063 PMIC for emtrion i.MX6 boards support.
- Enable driver support for Pixel Pipeline (PXP) and DCP crypto block
which are found on i.MX6 and i.MX7 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDg70AAoJEFBXWFqHsHzOlUEH/R/8seL4dP1yLOwCsPlf6ErA
8D/V9VaO+0MRqhqUcXpZumXTuOU1zRQJs8RhcPn0psinHDmmgR6g4POSBtFejFCr
ahFWG1Ah84Z551ZcDvutK+4k3p2PIxboYeDfpO8qL2/2bE/y/766oSg8MiUJNd0N
AL7cCSh0a+LftdKXZcB84VXGM/1YOVmdTuZrZJwfsT6v8HrBbKkdm6kuX9Lli0Y4
/Xke/A9qaxNoHJg4U/dWawTmYpnLN0erd9VWoiXyjkIMPurrFoWOao0VIQmqWGQu
tVBvwStqaYuhSOlfWxWZW3OC+2wEI6OzPDdzHZIAEZxerp5vmsqIUgQW3ohzE3A=
=jW4X
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig update for 4.21:
- Enable build of i.MX7ULP SoC support.
- Enable Goodix touchscreen driver which is needed by ConnectCore 6UL
SBC Pro (ccimx6ulsbcpro) board support.
- Enable USB_ANNOUNCE_NEW_DEVICES to help USB issue debugging and
BT_BNEP to support network over bluetooth.
- Remove explicit ARM_UNWIND disabling as it's selected by ARM EABI
support.
- Enable DA9063 PMIC for emtrion i.MX6 boards support.
- Enable driver support for Pixel Pipeline (PXP) and DCP crypto block
which are found on i.MX6 and i.MX7 SoCs.
* tag 'imx-defconfig-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
ARM: imx_v6_v7_defconfig: Remove explicit ARM_UNWIND disable
ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support
ARM: imx_v6_v7_defconfig: Select the PXP driver
ARM: imx_v6_v7_defconfig: Enable CRYPTO_DEV_MXS_DCP
Signed-off-by: Olof Johansson <olof@lixom.net>
Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel
for Samsung Exynos5250-based Arndale board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel
for Samsung Exynos5250-based Arndale board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add RTC and charger drivers for MAX8998 chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
screen by default on Digi International's AUO/Goodix LCD accessory kit used
with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables drivers for STM32 timer, low power timer and analog hardware
that can be used on STM32MP1 SoC:
- Timer & LP Timer MFD core, PWM, trigger & encoder drivers
- IIO ADC/DAC/DFSDM
- vrefbuf regu driver (voltage reference buffer).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
We're finally changing omaps to use 8250_OMAP instead of SERIAL_OMAP
for multi_v7_defconfig. This will make things much easier for distros,
and the kernel already warns about the kernel console getting
redirected with CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP defaulting to y.
People using /etc/inittab still need to s/ttyO/ttyS/ if using the
out-of-box multi_v7_defconfig, and that did not seem to be an issue
when we moved omap2plus_defconfig to use 8250_OMAP earlier.
The other change is to enable CONFIG_SND_SOC_TLV320AIC23_I2C as a
loadable module that I forgot to send a pull request for earlier.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlwAQ88RHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXN88xAAsGNc0MWOIFSMdOVjziEQjG6xmpwZcn3M
O8Z+Qg2V7DCSxrufM4vWIBo9Bt3AxMO2tv8S6YyrSmJ0rAc1KZUKWsB8wOuQTSY3
6yG1x+HxDKRZaj2RFO0o4vbDgEMqcDG5osQDBSj+EYMheg8ieQLdO6tGULXUh12D
897UzSfi0FGCjp6ytfNdaN1f254NFROevLm17Ab3ZrN91D8bCFgnX5csiNFsaJWG
uFnGdk+hAs0GyuUzeC8osqJ2HxNY+4zLZENbYhwzSpfnLgCiNFUgz+LDinjtOWm/
MqKxt2NC/6J1ZWdgSOST/osxfuaytXaLM5zCaTYoOzplIJYJ5uB5X5vteevbSmw1
rvS3XV5cca9Lwpjxs82S4Tf0Q0t1l+vI4wRGQ6MmSs4up3C8WwYKyYvIxjzEKE78
ztx8KfWyPCau87il2P6M4SjrClmF9lh0RxYdq5C3sFplgm5s6wZdgAkED+JkZYaF
Avd1cmzS/eDWbC9wsDY0opONm16Tx220hts2PrWXdF7VZJBpZMjQImpvGeLEHZ1h
mf9AuAOaQT1z43LthwKzF5Z8vD28kHIv5KfvePN7NFiQz+p1ZmtOqDFAKoPu6a8b
uPYSTeyHWay6cwHBfzA2eCTAtA1mBe9YXfv+viTMGzbYQ+qabKm8E+E9s70WanZy
ktZg8UyjF8s=
=rfKY
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.21/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig changes for omaps for v4.21 merge window
We're finally changing omaps to use 8250_OMAP instead of SERIAL_OMAP
for multi_v7_defconfig. This will make things much easier for distros,
and the kernel already warns about the kernel console getting
redirected with CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP defaulting to y.
People using /etc/inittab still need to s/ttyO/ttyS/ if using the
out-of-box multi_v7_defconfig, and that did not seem to be an issue
when we moved omap2plus_defconfig to use 8250_OMAP earlier.
The other change is to enable CONFIG_SND_SOC_TLV320AIC23_I2C as a
loadable module that I forgot to send a pull request for earlier.
* tag 'omap-for-v4.21/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default
ARM: omap2plus_defconfig: Add tlv320aic23 as module
Signed-off-by: Olof Johansson <olof@lixom.net>
This activates the new PL11x DRM driver with the
Versatile Express family of reference designs.
-----BEGIN PGP SIGNATURE-----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=3sxh
-----END PGP SIGNATURE-----
Merge tag 'vexpress-defconfig-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig
Versatile Express defconfig updates:
This activates the new PL11x DRM driver with the
Versatile Express family of reference designs.
* tag 'vexpress-defconfig-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
This updates the Versatile defconfig to use the new P111 DRM
driver that is merged in the DRM subsystem.
We deactivate the old CLCD driver and activate the Pl111 DRM
driver and the SiI9022 HDMI bridge.
We activate DMA memory allocation using CMA so that the special
graphics memory for the on-board CLCD can be used.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the Versatile Express defconfig to match the
Kconfig changes in the kernel.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is very helpful debugging USB issues.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is necessary to support network over bluetooth:
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: kernel lacks bnep-protocol support
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: System does not support network plugin
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CONFIG_ARM_UNWIND is removed when running 'savedefconfig', but
selected by ARM EABI (AEBI) support. This is done in preparation to making
further changes to this defconfig cleaner.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
All recent emtrion modules based on i.mx6 make use of the DA9063.
Therefore enable it with the following defaults:
- CONFIG_MFD_DA9063=y
- CONFIG_REGULATOR_DA9063=y
- CONFIG_DA9063_WATCHDOG=m
MFD and REGULATOR are built-in to have it at Kernel boot-time.
The WATCHDOG is optional and could be loaded from userspace.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Pixel Pipeline (PXP) block is present on several i.MX SoCs
such as imx6dl, imx6sl, imx6ul, imx6sx, imx6ull and imx7d.
Select the PXP driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the bcm2835-camera driver, which depends on bcm2835-vchiq.
After that we gain more test coverage (e.g. Kernel CI).
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We've already moved omap2plus_defconfig over to use 8250-omap instead of
omap-serial driver. Let's update multi_v7_defconfig too.
By default we also enable SERIAL_8250_OMAP_TTYO_FIXUP that updates the
kernel serial console to point to 8250 driver and warns about it during
the boot.
Users with ttyO[0123] in their /etc/inittab should update inittab to
to use ttyS[0123] instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
I should have let this soak for a while in linux-next, since we have at
least one board that hit a regression from it. Revert from 4.20-rc, and
we'll queue it for next merge window once regression is fixed.
This reverts commit 513eb98595.
Signed-off-by: Olof Johansson <olof@lixom.net>
The iwg23s board comes with the SiI9022ACNU HDMI transmitter,
this patch makes sure the corresponding driver gets built.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This block is present in 6sl, 6sll and 6ull so it should be enabled in
the default imx kernel config.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using CONFIG_PREEMPT as preemption model for ARMv7 systems
appear to be the most reasonable default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- A series from Fabio to synchronize i.MX defconfig files with
savedefconfig.
- Enable CONFIG_TMPFS_POSIX_ACL to fix ACL applying failures seen with
starting weston from sddm as unprivileged user.
- Enable MC13783/MC13892 ADC driver by default.
- Select CONFIG_ARM_CPUIDLE by default to support generic ARM cpuidle
driver which is useful for i.MX platforms like i.MX7S/D.
- Built in usbnet drivers to support NFS mount via USB Ethernet dongle
on SoCs which have no native Ethernet controller, such as i.MX6 SLL
and i.MX7 ULP.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbt2VNAAoJEFBXWFqHsHzOZwgH/A2Rx1ofaVgEugMMPb2/mBlU
vZsFyUepdxD48gzM0xfyTHfnLtL/HlCffbvOByiw03UjijtB/lsiasULBEdk9d58
ECoykM4Du6igZyrqMVp25Yjy46G/96MKbDIFvhqiI+fTHj12xMWMxgUYCiJFzVKP
vaHzHq39vbb42AhEPN1tgCNc7GPp9fvS2KfZjykjaOxYgKv3dQAPTTSQ7Ph7Gc3A
SUQIf/o4Y2EADmwqXejHtH4j8TIxxIo88uoN401rEtu69M7v2MbigkqDnK1K7MpH
dV2y+PmagsH/Bodez55skCD815C/YXYb4c85ha6aCjc3UO3+aRA9i9+59s9q4Vk=
=BogG
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig update for 4.20:
- A series from Fabio to synchronize i.MX defconfig files with
savedefconfig.
- Enable CONFIG_TMPFS_POSIX_ACL to fix ACL applying failures seen with
starting weston from sddm as unprivileged user.
- Enable MC13783/MC13892 ADC driver by default.
- Select CONFIG_ARM_CPUIDLE by default to support generic ARM cpuidle
driver which is useful for i.MX platforms like i.MX7S/D.
- Built in usbnet drivers to support NFS mount via USB Ethernet dongle
on SoCs which have no native Ethernet controller, such as i.MX6 SLL
and i.MX7 ULP.
* tag 'imx-defconfig-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
ARM: imx_v4_v5_defconfig: Remove unneeded options
ARM: imx_v4_v5_defconfig: Re-sync defconfig
ARM: mxs_defconfig: Remove unneeded options
ARM: mxs_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: Remove unneeded options
ARM: imx_v6_v7_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default
ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot
ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER
ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andreas Müller reports:
"Fixes:
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights."
Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues.
Reported-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the following unneeded config options:
- CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS have been removed
since commit a930d8bd94 ("usb: chipidea: Always build ULPI code")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/imx_v4_v5_defconfig
and only keep the options that were moved around.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the following unneeded config options:
- CONFIG_ARM_THUMB is selected by default
- CONFIG_I2C is selected by default.
- CONFIG_FRAMEBUFFER_CONSOLE is selected by default
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
and only keep the options that were moved around.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the following unneeded config options:
- CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS have been removed
since commit a930d8bd94 ("usb: chipidea: Always build ULPI code")
- CONFIG_DEBUG_FS is selected by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
and only keep the options that were moved around.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some i.MX platforms like i.MX7S/D uses generic ARM cpuidle
driver and psci method to support cpuidle feature, select
CONFIG_ARM_CPUIDLE by default for such platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Chips such as imx6sll and imx7ulp have no ethernet support so the common
development usecase of nfs boot is supported via usb ethernet dongles.
Add drivers for additional usbnet device directly into the kernel image
produced by the imx defconfig.
This list is based on the usbnet devices supported by uboot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To support loading sdma firmware automatically from rootfs, enable
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK.
Please get sdma firmware from below link and put it into
rootfs entry -- /lib/firmware/imx/sdma/:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the USB3 and USB2 phys implemented in UniPhier SoCs.
These phys are necessary for dwc3 and ehci controllers driving
the USB ports on Pro4 and PXs2 SoCs.
Since the USB host drivers are already built-in, so only the phy
driver are missing to allow booting with USB devices.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
4.20, please pull the following:
- Stefan updates the bcm2835_defconfig file to turn on the bcm2835-audio
driver.
-----BEGIN PGP SIGNATURE-----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=+OC+
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.20/defconfig' of https://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig changes for
4.20, please pull the following:
- Stefan updates the bcm2835_defconfig file to turn on the bcm2835-audio
driver.
* tag 'arm-soc/for-4.20/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable bcm2835-audio
Signed-off-by: Olof Johansson <olof@lixom.net>
The AM3517 EVM has an expander board which has two tlv320aic23
codecs. This enables the driver for these codecs as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable DRM and MIPI DSI support for STMicroelectronics as loadable module.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Problem:
ab460a2e72 ("rpmsg: qcom_smd: Access APCS through mailbox framework"
added a "depends on MAILBOX") to RPMSG_QCOM_SMD, thus RPMSG_QCOM_SMD
becomes unset since MAILBOX was not enabled in qcom_defconfig and is
not otherwise selected for the dragonboard. When the resulting
kernel is booted the mmc device which contains the root file system
is not available.
Fix:
add CONFIG_MAILBOX to qcom_defconfig
Fixes: ab460a2e72 ("rpmsg: qcom_smd: Access APCS through mailbox framework"
added a "depends on MAILBOX")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This enables the bcm2835-audio driver, which depends on bcm2835-vchiq.
After that we gain more test coverage (e.g. Kernel CI).
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
R-Car Gen2 (and RZ/G1) SoCs have a Fine Display Processor, hence enable
support for it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car Gen2 (and RZ/G1) SoCs have a Fine Display Processor, hence enable
support for it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Refresh the defconfig for Renesas ARM boards:
- Move options that have moved,
- Remove CONFIG_HAVE_ARM_ARCH_TIMER (auto-enabled),
- Remove ENABLE_WARN_DEPRECATED (removed).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This updates the ARM Versatile defconfig to the latest
Kconfig structural changes and adds the DUMB VGA bridge
driver so that VGA works out of the box, e.g. with QEMU.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
As the soc_camera framework is going to be deprecated soon, remove the
associated configuration options from shmobile defconfig.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
imx6sl-evk, imx6sll-evk and imx6sx-sdb boards use a Seiko 43WVF1G panel.
Now that the DRM mxsfb driver is the one selected by default, let's
also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue
to have a working display by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx23-evk and imx28-evk boards use a Seiko 43WVF1G panel.
Now that the DRM mxsfb driver is the one selected by default, let's
also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue
to have a working display by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and there
to turn on drivers that are needed or useful on the various platforms.
-----BEGIN PGP SIGNATURE-----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=t+qo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep these separate since some files are shared and conflict-prone,
but there isn't really much to write about here.
Some of the churnier pieces is for the Aspeed platforms, which did an
overdue refresh of the defconfig, and enabled USB gadget and some
drivers from there. Most of the rest are minor additions here and
there to turn on drivers that are needed or useful on the various
platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: multi_v7_defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
ARM: config: aspeed: Enable new FSI drivers
ARM: config: multi_v5: Enable ASPEED drivers
ARM: config: multi_v5: Refresh configuration
ARM: config: aspeed: Update defconfig
ARM: multi_v7_defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
ARM: shmobile: defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Enable reset controller support
ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus.
arm64: defconfig: Enable CONFIG_MTD_NAND_QCOM for IPQ8074
ARM: qcom_defconfig: Enable QCOM NAND related configs
ARM: imx_v6_v7_defconfig: add DMATEST support
ARM: mvebu_v7_defconfig: enable SFP support
ARM: mvebu_v7_defconfig: sync defconfig
ARM: multi_v7_defconfig: Add Marvell NAND controller support
arm: configs: Add USB gadget to Aspeed G5 defconfig
arm: configs: Add USB gadget to Aspeed G4 defconfig
arm64: defconfig: enable HiSilicon PMU driver
...
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
- New Device Support
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
- New Functionality
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
- Fix-ups
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
- Bug Fixes
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501
-----BEGIN PGP SIGNATURE-----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=4Yj4
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
- Refresh the multi ARMv5 defconfig, and add AST2400 related drivers
- Enable new ASPEED hardware that we've merged in the past few cycles.
There are about 14 different drivers since we last refreshed the
defconfig
- Turn on features required by systemd, and other bits of OpenBMC
userspace
- Enable security related options
-----BEGIN PGP SIGNATURE-----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=Icyg
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
ASPEED defconfig updates for 4.19
- Refresh the multi ARMv5 defconfig, and add AST2400 related drivers
- Enable new ASPEED hardware that we've merged in the past few cycles.
There are about 14 different drivers since we last refreshed the
defconfig
- Turn on features required by systemd, and other bits of OpenBMC
userspace
- Enable security related options
* tag 'aspeed-4.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed: Enable new FSI drivers
ARM: config: multi_v5: Enable ASPEED drivers
ARM: config: multi_v5: Refresh configuration
ARM: config: aspeed: Update defconfig
arm: configs: Add USB gadget to Aspeed G5 defconfig
arm: configs: Add USB gadget to Aspeed G4 defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
multi_v7_defconfig and shmobile_defconfig Enhancement:
* Enable support for recently upstreamed RZN1D-DB board
in multi_v7_defconfig and shmobile_defconfig. This is
to give better test coverage.
shmobile_defconfig Clean-Up:
* Drop NET_VENDOR_<FOO>=n
This reduces the size of the defconfig without any change in the
resulting kernel config.
shmobile_defconfig Enhancements:
* Disable long deprecated /sbin/hotplug helper
* Enable reset controller support
This is to give better test coverage.
This may be used by reset controller support in the Renesas CPG/MSSR
driver when used by R-Car Gen2 and RZ/G1 SoCs.
-----BEGIN PGP SIGNATURE-----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=tQ3T
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.19
- Enable new RZN1D-DB board in multi_v7_defconfig and shmobile_defconfig
- shmobile_defconfig:
+ Drop NET_VENDOR_<FOO>=n
+ Disable long deprecated /sbin/hotplug helper
+ Enable reset controller support
* tag 'renesas-arm-defconfig-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
ARM: shmobile: defconfig: Enable support for RZN1D-DB
ARM: shmobile: defconfig: Enable reset controller support
ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
Signed-off-by: Olof Johansson <olof@lixom.net>
This turns on the FSI-attached I2C bus driver, and the ColdFire
offloaded FSI master which are new to 4.19.
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables the devices used in the AST2400 family of BMC SoCs:
- VUART
- SPI NOR
- LPC controller
- LPC snoop (port 80)
- Ethernet
- GPIO
- ADC
- I2C
- Random number generator
- IPMI KCS
- IPMI BT
- Fan/Tach
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is the result of a make mutli_v5_defconfig && make savedefconfig.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Enable new support:
hardware random number generator
FSI and client drivers
DRM GFX driver
- Disable unwanted features:
ARM_APPENDED_DTB
ARM_ATAG_DTB_COMPAT
BLK_DEV_RAM
- Sync G4 and G5 with OpenBMC configurations
BLK_DEV_LOOP, for updater mechanic
CRYPTO_HMAC, for libsdbus features
CRYPTO_SHA256
CRYPTO_USER_API_HASH
- Enable security related features:
SLAB_FREELIST_RANDOM
STRICT_KERNEL_RW
CC_STACKPROTECTOR_STRONG
HARDENED_USERCOPY
FORTIFY_SOURCE
- Increase kernel log buffer size
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable support for the Renesas RZN1D-DB Board:
- RZ/N1D (R9A06G032) base SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
No recent mainstream system uses the /sbin/hotplug fork-bomb any more.
Commit 7934779a69 ("Driver-Core: disable
/sbin/hotplug by default") disabled it in Kconfig, but the various
defconfigs weren't updated.
According to the systemd requirements, this option must be disabled, as
it slows down the system and confuses udev.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the Renesas RZN1D-DB Board:
- RZ/N1D (R9A06G032) base SoC support,
- Synopsys DesignWare 8250 serial port support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
R-Car Gen2 and RZ/G1 SoCs can make use of the optional reset controller
support in the Renesas CPG/MSSR driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enabling NET_VENDOR_* Kconfig options does not directly affect the
kernel, so there is no need to explicitly disable them.
The individual network drivers under them are still disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
- Enable ISL29018 sensor and MMA8452 accelerometer driver support for
imx6qdl-sabreauto board.
- Enable DMATEST support which is useful for DMA driver development
testing.
- Use the DRM driver for MXSFB LCD controller found on i.MX23, i.MX28,
i.MX6SX and i.MX7 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbUpWLAAoJEFBXWFqHsHzOlSMH/3lLUjNHkZyeZ06KiOLAJ05W
dQT01yA5QZ7MBr2xBbla/4aAjiVYIkeUfbMbRsdx+XQ4p70tvA9op9U4aGOAKBzE
Coyon2ufXJAxg60MBs9VaPrP/xouJnGeKBCm2Sgvaht/e5hngMc0LOFX6bNFa/uJ
gc0r51DMHExpSV3apidgYoUKTGFoPGvTSM4Cd+mQMVdTJAQsrKSsx3w6KlzWiVlB
Pw1iiqlOkUxaON7751uCHQvebY4XYZ+G7F1kFKS2nVrUB5qtjbhbJdXBon+nBLlt
NCscfg5GTqhlIIkCrcci3sStG+kwIo01YfJxigroSZodssUm/r/9KmqnHpgSly8=
=8A9u
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig update for 4.19:
- Enable ISL29018 sensor and MMA8452 accelerometer driver support for
imx6qdl-sabreauto board.
- Enable DMATEST support which is useful for DMA driver development
testing.
- Use the DRM driver for MXSFB LCD controller found on i.MX23, i.MX28,
i.MX6SX and i.MX7 SoCs.
* tag 'imx-defconfig-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add DMATEST support
ARM: imx_v6_v7_defconfig: use MXSFB DRM driver
ARM: mxs_defconfig: use MXSFB DRM driver
ARM: imx_v6_v7_defconfig: Enable imx6qdl-sabreauto sensors
Signed-off-by: Olof Johansson <olof@lixom.net>
IPQ8064 and IPQ4019 boards contain NAND flash
memory for which these configs need to be enabled.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add DMATEST support and remove invalid options, such as
CONFIG_BT_HCIUART_H4 is default enabled and CONFIG_SND_SOC_IMX_WM8962
is out of date and not appear in any config file. Please refer to
Documentation/driver-api/dmaengine/dmatest.rst to test MEMCPY feature
of imx-sdma.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- add NAND controller on multi_v7
- add SFP support on mvebu_v7
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW09bkAAKCRALBhiOFHI7
1RYzAJ4vD274nhcu4Qt3n2vOzS5Wae+sMQCeNmutPbYM9fJg5A3KH/7jxJ0yeyM=
=K1xh
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.19-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu defconfig for 4.19 (part 1)
- add NAND controller on multi_v7
- add SFP support on mvebu_v7
* tag 'mvebu-defconfig-4.19-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v7_defconfig: enable SFP support
ARM: mvebu_v7_defconfig: sync defconfig
ARM: multi_v7_defconfig: Add Marvell NAND controller support
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables support for SFP cages on SolidRun Armada 38x platforms.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Use savedefconfig to sync defconfig for current kernel. No change in
generated configuration.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Now that the vhub driver is upstream and the device-trees
updated, let's enable this by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Now that the vhub driver is upstream and the device-trees
updated, let's enable this by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
removed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use the the DRM driver for MXSFB LCD controller (used in i.MX23/
i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be
removed.
Note that this does not remove CONFIG_FB. CONFIG_FB gets selected
implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable options needed for booting full system on S5Pv210-based Samsung
Galaxy S mobile phones.
-----BEGIN PGP SIGNATURE-----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=vPjN
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig changes for v4.19
Enable options needed for booting full system on S5Pv210-based Samsung
Galaxy S mobile phones.
* tag 'samsung-defconfig-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s5pv210_defconfig: Enable options needed to boot typical Linux distro
ARM: s5pv210_defconfig: Enable drivers for Samsung Aries based phones
ARM: s5pv210_defconfig: Run make savedefconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
-----------------------------------
* Enable support for PWM backight and bluetooth
* Remove some vestiges of mach-davinci private clock implementation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y4ms
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.19/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
DaVinci defconfig updates for v4.19
-----------------------------------
* Enable support for PWM backight and bluetooth
* Remove some vestiges of mach-davinci private clock implementation.
* tag 'davinci-for-v4.19/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable Bluetooth
ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci_all_defconfig: set CONFIG_BACKLIGHT_PWM=m
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.19, please pull the following:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in both
multi_v7_defconfig and bcm2835_defconfig
-----BEGIN PGP SIGNATURE-----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=C2uA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.19/defconfig' of https://github.com/Broadcom/stblinux into next/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates
for 4.19, please pull the following:
- Stefan enables the Raspberry Pi voltage sensor driver (HWMON) in both
multi_v7_defconfig and bcm2835_defconfig
* tag 'arm-soc/for-4.19/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable RPi voltage sensor
ARM: bcm2835_defconfig: Enable RPi voltage sensor
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the STM32 Real Time Clock (RTC) driver, implemented on STM32MP1 SoC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Enable few options which are required to boot typical Linux distro. It
was tested by booting ArchLinux ARM from sdcard.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable config options required for Samsung Aries based phones.
ARM_APPENDED_DTB is also needed, because stock bootloader does not
support loading DTB files.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cleanup the config with savedefconfig.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The cros-ec I2C and SPI transport drivers have been moved from MFD
subsystem to platform/chrome, at the same time, the config symbol has
been renamed and lost the MFD_ prefix, so update all configs to the new
config symbol name.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
- A couple of imx defconfig updates selecting USB ULPI support to fix
a regression seen with USB driver, which is caused by commit
03e6275ae3 ("usb: chipidea: Fix ULPI on imx51").
- A fix on imx51-zii-rdu1 board touchscreen pinctrl setting, which
causes an interrupt storm.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbO3x0AAoJEFBXWFqHsHzODGkIAIIJFPOWBYHyxAVLAtqpNTt7
+Yggu9LGe7rhspT+Hi2DocKIEj1Z11x49KJCqxwrEHg+7xyax6d78b1iclCHLRlr
S9jxulipzkBs/neebrhh6cyF8sxA7TPUgXtEMdRJwYygUoZhe9hngTO3jv+xoDky
l1l9zH9gAlAQA1cxN6Z4ZWYDkNS0mYK3e1VzaeyCXsq5GJ1Vm5Qw1ooTE5DL3K1g
5B2Hw057DJvcSwOhIVir/MQR8sAWj1sKYdsCouxrO/ThEyofEAtfn22romcPaGPW
WBOuTNrOrMy6O/+ndMBNJBXeGt1tONL2cjLbrpffaXJYq6m/56efsee9u1u18Vg=
=4Agh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.18, round 2:
- A couple of imx defconfig updates selecting USB ULPI support to fix
a regression seen with USB driver, which is caused by commit
03e6275ae3 ("usb: chipidea: Fix ULPI on imx51").
- A fix on imx51-zii-rdu1 board touchscreen pinctrl setting, which
causes an interrupt storm.
* tag 'imx-fixes-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
Signed-off-by: Olof Johansson <olof@lixom.net>
Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
USB ULPI can be functional on some boards like that use ULPI
interface.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that
USB ULPI can be functional on some boards like imx51-babbge.
This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit
03e6275ae3 ("usb: chipidea: Fix ULPI on imx51").
Suggested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_MMC_SDHCI_OMAP so that TI's K2G SoC
can use sdhci-omap driver for MMC/SD controller.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This enables Bluetooth modules in davinic_all_defconfig needed for LEGO
MINDSTORMS EV3.
Build CONFIG_SERIAL_DEV_BUS into the kernel since SERIAL_DEV_CTRL_TTYPORT
requires it so.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Enable micrel and dp83867 phys for K2G Boards in keystone_defconfig
to support Network driver on these boards (K2G ICE and GP EVM).
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This removes CONFIG_DAVINCI_RESET_CLOCKS. The option has been removed from
the kernel.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The defconfig has drifted over time, as Kconfig entries have changed order
or default values. Several maintainers ended up running 'savedefconfig'
themselves which caused a cascade of conflicts. Let's do it once and
for all in our tree before -rc2 instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
