Enable several very useful options and drivers for hardware that is found
on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may
require firmware files extracted from original Android image.
Link: https://github.com/grate-driver/linux-firmware
Link: https://github.com/grate-driver/alsa-ucm-conf
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CPUFREQ userspace governor in the tegra_defconfig so that
we can test CPUFREQ with the userspace governor with this configuration
on 32-bit Tegra devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7Ij6IUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5peQf+N9PmhSdT/xgWUsudpYBTFGxZ7CP2
mkt86Qxdw5MboaR0Z+L1fsNRYglWU14Hn9GTvPmcoN7VTx6nDJnC55F5xWmP7r1C
ZgI9hH1jZG/jEWJAJmp0sZIBuaZJegUmbD1Pk3dOIMwv/9hEGtj2nI05QuUaTKof
qa8KxSwvYZSd8SKZHDoEl/E6yZZjNIlfMsv6BKTbRfqMHrixZ1y54muNNLKuca3v
hoI4I+AYPy3XhhACjYR3mhSVUF2pCVOpUcFktKdH+ZTLXX/dShMec5vyLwws+CEi
Oldg3J98qkDMnmMXV/1RLvYI/CIR6v7GbsashfinSAeeut6uPz4kgVyhpA==
=kqAi
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.8:
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
* tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
Link: https://lore.kernel.org/r/20200523032516.11016-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As these boards have no more users nor testers, and patching them has
become a burden, be that because of the PCI part or the MTD NAND
support, let's remove them.
The cm-x300 will for now remain and represent Compulab boards at its
best in the PXA department.
Link: https://lore.kernel.org/r/20200521185140.27276-1-robert.jarzmik@free.fr
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
defconfig to enable the audio codec in sunxi_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7MmQAKCRDj7w1vZxhR
xYFJAQC7OE0ip7aQrJY24AXQgeA1abiQ1+P1oHbHW6E7qnXiGgD9Exd18pO1N1JH
URcmEMjg8plFQn9+gGcHy7VFhE5V8w8=
=ut84
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two patches to enable the new cpufreq support on the H6 for the arm64
defconfig to enable the audio codec in sunxi_defconfig.
* tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: configs: Enable sun50i cpufreq nvmem
ARM: configs: sunxi: Add sun8i analog codec
Link: https://lore.kernel.org/r/9fd4d403-f6c8-420d-8b03-62e8485a0b3d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5fqAAKCRCKwlD9ZEnx
cLL+AP4qfjbDM073NG9nuiSssmswLezSrHqssSCabZ2Gx9ubegD9ERfeW4jX+6+o
VVSMvqH2paZNiuSUs2lJI/rSjJ23KA8=
=pMSS
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8 (take two)
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
* tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: multi_v7_defconfig: Enable r8a7742 SoC
ARM: shmobile: defconfig: Enable r8a7742 SoC
Link: https://lore.kernel.org/r/20200515100547.14671-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
-----BEGIN PGP SIGNATURE-----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=aCxj
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.8
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
* tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules
ARM: exynos_defconfig: Enable serial bus and BCM HCIUART drivers
Link: https://lore.kernel.org/r/20200512122922.5700-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
-----BEGIN PGP SIGNATURE-----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=LMD6
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
* tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable fixed-regulator
Link: https://lore.kernel.org/r/20200511210522.28243-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v5.7-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXqqEUgAKCRCKwlD9ZEnx
cGICAQDav5TgQ510pgY+N73kKI5QvVn1jDdpM22pIS45V9m8KQD9EtFAilc4s1yI
kYryOSflL9tjubS+SxjwAs4fCMdPtgc=
=dHzW
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8
- Refresh shmobile_defconfig for v5.7-rc1.
* tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.7-rc1
Link: https://lore.kernel.org/r/20200430084849.1457-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
-----BEGIN PGP SIGNATURE-----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=mEUB
-----END PGP SIGNATURE-----
Merge tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/defconfig
Ux500 defconfig changes for functionality merged in the
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
* tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: defconfig: u8500: Enable new drivers for ux500
ARM: defconfig: u8500: Enable new drivers for samsung-golden
Link: https://lore.kernel.org/r/CACRpkdaxT8dc=mhAd51+KtQ0K4Uj5tttt36bYJLqP_hNfWXP8w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are new drivers for functionality of that family
(RTC and ADC), so enable them, since they are used by
various i.MX6 boards.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
My recent commit b6d49cab44 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Fixes: b6d49cab44 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new device tree for samsung-skomer and the HREF520
devicetree enables some additional drivers that are not yet
selected in the u8500_defconfig:
- The GPIO-based I2C bus master driver for some peripherals
that do not use the I2C hardware master.
- The Novatek NT35510 driver for the Skomer panel.
- The Sony ACX424AKP driver for the HREF520 panel.
- The GPIO-based backlight driver for Skomer.
- The BMA180 driver for the BMA254 accelerometer found in the
Skomer.
- The new GP2AP002 driver for the GP2AP002S00F proximimty sensor
found in the Skomer and Golden devices.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the defconfig for Renesas ARM boards:
- Enable CONFIG_DRM_DISPLAY_CONNECTOR (for HDMI, VGA, and composite
display connectors on various R-Car H1, Gen2, and RZ/G1 boards,
since commit 0c275c3017 ("drm/bridge: Add bridge driver for
display connectors")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200415124923.2510-1-geert+renesas@glider.be
Most CEC platform drivers are using VIDEO_*_CEC pattern, some with
an _HDMI extension too.
Well, they're not related to V4L2 support, and we don't really
need those big config names. So drop VIDEO_* from them, remove
_HDMI (if present) and move CEC to the start.
This way, all platform driver options are now CEC_<driver>.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new device tree for samsung-golden depends on some additional
drivers that are not selected in the u8500 defconfig yet:
- Bluetooth: hci_bcm
- WiFi: brcmfmac
- Touchscreen: atmel_mxt_ts
- Vibrator: gpio-vibra
- Sensors: inv_mpu6050 (IMU)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On my orange pi PC, I got lot of "sun4i-codec 1c22c00.codec: Failed to register our card".
This was due to a missing component: the sun8i analog codec.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
MAC80211/CFG80211 framework requires loading regulatory.db from
/lib/firmware directory, so it makes very little sense to have it
built-in. Change it to be built as modules to let it properly load the
needed firmware/db files. As a side effect of this change, the size of
the compressed modules on SquashFS increased significantly from 27MiB
to 38MiB, so increase the size of BLK_DEV_RAM to allow the modules to
fit into it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable serial bus and BCM HCIUART Bluetooth drivers available on the
Exynos3250-based Rinato board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
As usual, tons of new drivers and other options got merged and
are now enabled in the defconfig files, usually as loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=NkVs
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"As usual, tons of new drivers and other options got merged and are now
enabled in the defconfig files, usually as loadable modules"
* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
...
The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including
cpuidle, pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=UTk1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
update changing all our txt files to rst ones. Excluding that, we
have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc,
pm80xx, aacraid), a treewide update for scnprintf and some other minor
updates. The major core update is Hannes moving functions out of the
aacraid driver and into the core.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB
Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/
GOilX/pJczTRJDCGNis=
=g7Sk
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.
-----BEGIN PGP SIGNATURE-----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=nQLE
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
PM changes for am335x and am437x for v5.7 merge window
A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.
* tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE
soc: ti: pm33xx: Add base cpuidle support
ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle
ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x
dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method
Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add sama5d4 watchdog to at91_dt_defconfig as it is present on sam9x60
-----BEGIN PGP SIGNATURE-----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=27k/
-----END PGP SIGNATURE-----
Merge tag 'at91-5.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/config
AT91 defconfig for 5.7
- Add sama5d4 watchdog to at91_dt_defconfig as it is present on sam9x60
* tag 'at91-5.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable sama5d4 compatible watchdog
Link: https://lore.kernel.org/r/20200322085711.GA208700@piout.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We want to enable some more features for omap2plus_defconfig to make it
more usable:
- Enable scururity for ext4 so setcap works
- Enable simple-pm-bus so it can be later on be configured in the dts
files as needed
- Enable zram as loadable modules as we do have devices using it
- Enable more devices for droid4 for 1-wire battery eeprom and isl29028
proximity sensor
- Enable mcpdm clocks from the PMIC as loadable modules
- Enable ina2xx_adc as loadable module
- And finally let's also omap2plus_deconfig for moved and dropped options
-----BEGIN PGP SIGNATURE-----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=Icp5
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/config
Defconfig changes for omaps for v5.7 merge window
We want to enable some more features for omap2plus_defconfig to make it
more usable:
- Enable scururity for ext4 so setcap works
- Enable simple-pm-bus so it can be later on be configured in the dts
files as needed
- Enable zram as loadable modules as we do have devices using it
- Enable more devices for droid4 for 1-wire battery eeprom and isl29028
proximity sensor
- Enable mcpdm clocks from the PMIC as loadable modules
- Enable ina2xx_adc as loadable module
- And finally let's also omap2plus_deconfig for moved and dropped options
* tag 'omap-for-v5.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
ARM: omap2plus_defconfig: Enable ext4 security for setcap
Link: https://lore.kernel.org/r/pull-1584575344-983293@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xnT0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7/cwf/W3mjSLA4MhY8brUydqYYlPTPDhZT
ZNvQLG8/dfeCnfuTF9Z8kXTkEXI+CgyzzLwWvRSxPDIvCcxFV38yjWEWodMWSMPc
gTPMHkRRCu63VuE0suwDSDsaPn4/g3s5E51kFzSoEnSSy0n+fVmXJosVoB9bEDNF
o15R3qT7leFwoR+bAB+h7X8EloPCC7QzZKpKZfNlIFfDd6aMObo1++HY+FqeNy7S
88lD+JdW2yyoj9r9Qkx3k/c3Hh+1uMysIM8FsVqeYSPGSrN8eK+wA5CqtHQ3TF8/
jcB7LdH0US8qL3oSnweCuT3Pb6zRtQwrsnpMZVR7Urue6Thq9i08jVuvUw==
=5yPc
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config
i.MX defconfig changes for 5.7:
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
arm64: defconfig: add i.MX system controller thermal support
ARM: multi_v7_defconfig: enable drm imx support
arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879
...
Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable QRTR and the Broadcomm bluetooth driver in the qcom_defconfig,
for usage on the 8974 devices.
-----BEGIN PGP SIGNATURE-----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=RP0d
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config
Qualcomm ARM defconfig updates for v5.7
Enable QRTR and the Broadcomm bluetooth driver in the qcom_defconfig,
for usage on the 8974 devices.
* tag 'qcom-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: Enable QRTR
ARM: qcom_defconfig: add Broadcom bluetooth options
Link: https://lore.kernel.org/r/20200318043931.GC470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Energy Model and Multi-core scheduler because they fit common
use of Exynos SoCs - mobile devices,
2. Enable more drivers for GalaxyS3/Trats2.
-----BEGIN PGP SIGNATURE-----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=KSB7
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/config
Samsung defconfig changes for v5.7
1. Enable Energy Model and Multi-core scheduler because they fit common
use of Exynos SoCs - mobile devices,
2. Enable more drivers for GalaxyS3/Trats2.
* tag 'samsung-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2
ARM: exynos_defconfig: Enable SCHED_MC and ENERGY_MODEL
ARM: exynos_defconfig: Enable SquashFS and increase RAM block device size
Link: https://lore.kernel.org/r/20200316175652.5604-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.7, please pull the following:
- Marek enables the Raspberry Pi 4 specific drivers: GENET, thermal, and
GPIO regulator support in bcm2835_defconfig
-----BEGIN PGP SIGNATURE-----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=XFZP
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.7/defconfig' of https://github.com/Broadcom/stblinux into arm/config
This pull request contains Broadcom ARM-based SoCs defconfig changes for
v5.7, please pull the following:
- Marek enables the Raspberry Pi 4 specific drivers: GENET, thermal, and
GPIO regulator support in bcm2835_defconfig
* tag 'arm-soc/for-5.7/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: add support for Raspberry Pi4
Link: https://lore.kernel.org/r/20200311212012.9418-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Only one platform is building KVM by default. How crazy! Remove
it whilst nobody is watching.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Looks like CONFIG_MTD_M25P80 no longer exists and the others just
move around the existing options. This makes it easier to create
patches against omap2plus_defconfig.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some devices have ina2xx_adc on i2c for measuring power consumption
and can nowadays just read the output via IIO.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The McPDM module is only usable on hardware where it's module clock
is wired to the PMIC. Let's enable the optional PMIC module clocks
for this so boards can use McPDM.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable more droid4 devices as loadable modules:
- We have an isl29028 proximity sensor
- Battery has an EEPROM that can be read with w1_ds250x
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable zram as loadable modules. This allows mounting some part of
memory as swap on low memory devices.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can use simple-pm-bus instead of simple-bus, let's enable it to allow
configuring it in dts files for using things like genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and
it is now a proper platform driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
