Commit Graph

87464 Commits

Author SHA1 Message Date
David S. Miller
4fbb97bac1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Remove the skb_ext_del from nf_reset, and renames it to a more
   fitting nf_reset_ct(). Patch from Florian Westphal.

2) Fix deadlock in nft_connlimit between packet path updates and
   the garbage collector.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 13:23:13 -07:00
Vladimir Oltean
1bd4487038 net: dsa: sja1105: Rename sja1105_spi_send_packed_buf to sja1105_xfer_buf
The most commonly called function in the driver is long due for a
rename. The "packed" word is redundant (it doesn't make sense to
transfer an unpacked structure, since that is in CPU endianness yadda
yadda), and the "spi" word is also redundant since argument 2 of the
function is SPI_READ or SPI_WRITE.

As for the sja1105_spi_send_long_packed_buf function, it is only being
used from sja1105_spi.c, so remove its global prototype.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 12:25:11 -04:00
Vladimir Oltean
dff79620c3 net: dsa: sja1105: Replace sja1105_spi_send_int with sja1105_xfer_{u32, u64}
Having a function that takes a variable number of unpacked bytes which
it generically calls an "int" is confusing and makes auditing patches
next to impossible.

We only use spi_send_int with the int sizes of 32 and 64 bits. So just
make the spi_send_int function less generic and replace it with the
appropriate two explicit functions, which can now type-check the int
pointer type.

Note that there is still a small weirdness in the u32 function, which
has to convert it to a u64 temporary. This is because of how the packing
API works at the moment, but the weirdness is at least hidden from
callers of sja1105_xfer_u32 now.

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 12:25:11 -04:00
Vladimir Oltean
09c1b41255 net: dsa: sja1105: Don't use "inline" function declarations in C files
Let the compiler decide.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 12:25:11 -04:00
Vladimir Oltean
3e8db7e560 net: dsa: sja1105: Fix sleeping while atomic in .port_hwtstamp_set
Currently this stack trace can be seen with CONFIG_DEBUG_ATOMIC_SLEEP=y:

[   41.568348] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[   41.576757] in_atomic(): 1, irqs_disabled(): 0, pid: 208, name: ptp4l
[   41.583212] INFO: lockdep is turned off.
[   41.587123] CPU: 1 PID: 208 Comm: ptp4l Not tainted 5.3.0-rc6-01445-ge950f2d4bc7f-dirty 
[   41.599873] [<c0313d7c>] (unwind_backtrace) from [<c030e13c>] (show_stack+0x10/0x14)
[   41.607584] [<c030e13c>] (show_stack) from [<c1212d50>] (dump_stack+0xd4/0x100)
[   41.614863] [<c1212d50>] (dump_stack) from [<c037dfc8>] (___might_sleep+0x1c8/0x2b4)
[   41.622574] [<c037dfc8>] (___might_sleep) from [<c122ea90>] (__mutex_lock+0x48/0xab8)
[   41.630368] [<c122ea90>] (__mutex_lock) from [<c122f51c>] (mutex_lock_nested+0x1c/0x24)
[   41.638340] [<c122f51c>] (mutex_lock_nested) from [<c0c6fe08>] (sja1105_static_config_reload+0x30/0x27c)
[   41.647779] [<c0c6fe08>] (sja1105_static_config_reload) from [<c0c7015c>] (sja1105_hwtstamp_set+0x108/0x1cc)
[   41.657562] [<c0c7015c>] (sja1105_hwtstamp_set) from [<c0feb650>] (dev_ifsioc+0x18c/0x330)
[   41.665788] [<c0feb650>] (dev_ifsioc) from [<c0febbd8>] (dev_ioctl+0x320/0x6e8)
[   41.673064] [<c0febbd8>] (dev_ioctl) from [<c0f8b1f4>] (sock_ioctl+0x334/0x5e8)
[   41.680340] [<c0f8b1f4>] (sock_ioctl) from [<c05404a8>] (do_vfs_ioctl+0xb0/0xa10)
[   41.687789] [<c05404a8>] (do_vfs_ioctl) from [<c0540e3c>] (ksys_ioctl+0x34/0x58)
[   41.695151] [<c0540e3c>] (ksys_ioctl) from [<c0301000>] (ret_fast_syscall+0x0/0x28)
[   41.702768] Exception stack(0xe8495fa8 to 0xe8495ff0)
[   41.707796] 5fa0:                   beff4a8c 00000001 00000011 000089b0 beff4a8c beff4a80
[   41.715933] 5fc0: beff4a8c 00000001 0000000c 00000036 b6fa98c8 004e19c1 00000001 00000000
[   41.724069] 5fe0: 004dcedc beff4a6c 004c0738 b6e7af4c
[   41.729860] BUG: scheduling while atomic: ptp4l/208/0x00000002
[   41.735682] INFO: lockdep is turned off.

Enabling RX timestamping will logically disturb the fastpath (processing
of meta frames). Replace bool hwts_rx_en with a bit that is checked
atomically from the fastpath and temporarily unset from the sleepable
context during a change of the RX timestamping process (a destructive
operation anyways, requires switch reset).
If found unset, the fastpath (net/dsa/tag_sja1105.c) will just drop any
received meta frame and not take the meta_lock at all.

Fixes: a602afd200 ("net: dsa: sja1105: Expose PTP timestamping ioctls to userspace")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 12:19:53 -04:00
Vladimir Oltean
d6530e5ad4 net: dsa: sja1105: Initialize the meta_lock
Otherwise, with CONFIG_DEBUG_SPINLOCK=y, this stack trace gets printed
when enabling RX timestamping and receiving a PTP frame:

[  318.537078] INFO: trying to register non-static key.
[  318.542040] the code is fine but needs lockdep annotation.
[  318.547500] turning off the locking correctness validator.
[  318.552972] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-13257-g0825b0669811-dirty 
[  318.561283] Hardware name: Freescale LS1021A
[  318.565566] [<c03144bc>] (unwind_backtrace) from [<c030e164>] (show_stack+0x10/0x14)
[  318.573289] [<c030e164>] (show_stack) from [<c11b9f50>] (dump_stack+0xd4/0x100)
[  318.580579] [<c11b9f50>] (dump_stack) from [<c03b9b40>] (register_lock_class+0x728/0x734)
[  318.588731] [<c03b9b40>] (register_lock_class) from [<c03b60c4>] (__lock_acquire+0x78/0x25cc)
[  318.597227] [<c03b60c4>] (__lock_acquire) from [<c03b8ef8>] (lock_acquire+0xd8/0x234)
[  318.605033] [<c03b8ef8>] (lock_acquire) from [<c11db934>] (_raw_spin_lock+0x44/0x54)
[  318.612755] [<c11db934>] (_raw_spin_lock) from [<c1164370>] (sja1105_rcv+0x1f8/0x4e8)
[  318.620561] [<c1164370>] (sja1105_rcv) from [<c115d7cc>] (dsa_switch_rcv+0x80/0x204)
[  318.628283] [<c115d7cc>] (dsa_switch_rcv) from [<c0f58c80>] (__netif_receive_skb_one_core+0x50/0x6c)
[  318.637386] [<c0f58c80>] (__netif_receive_skb_one_core) from [<c0f58f04>] (netif_receive_skb_internal+0xac/0x264)
[  318.647611] [<c0f58f04>] (netif_receive_skb_internal) from [<c0f59e98>] (napi_gro_receive+0x1d8/0x338)
[  318.656887] [<c0f59e98>] (napi_gro_receive) from [<c0c298a4>] (gfar_clean_rx_ring+0x328/0x724)
[  318.665472] [<c0c298a4>] (gfar_clean_rx_ring) from [<c0c29e60>] (gfar_poll_rx_sq+0x34/0x94)
[  318.673795] [<c0c29e60>] (gfar_poll_rx_sq) from [<c0f5b40c>] (net_rx_action+0x128/0x4f8)
[  318.681860] [<c0f5b40c>] (net_rx_action) from [<c03022f0>] (__do_softirq+0x148/0x5ac)
[  318.689666] [<c03022f0>] (__do_softirq) from [<c0355af4>] (irq_exit+0x160/0x170)
[  318.697040] [<c0355af4>] (irq_exit) from [<c03c6818>] (__handle_domain_irq+0x60/0xb4)
[  318.704847] [<c03c6818>] (__handle_domain_irq) from [<c07e9440>] (gic_handle_irq+0x58/0x9c)
[  318.713172] [<c07e9440>] (gic_handle_irq) from [<c0301a70>] (__irq_svc+0x70/0x98)
[  318.720622] Exception stack(0xc2001f18 to 0xc2001f60)
[  318.725656] 1f00:                                                       00000001 00000006
[  318.733805] 1f20: 00000000 c20165c0 ffffe000 c2010cac c2010cf4 00000001 00000000 c2010c88
[  318.741955] 1f40: c1f7a5a8 00000000 00000000 c2001f68 c03ba140 c030a288 200e0013 ffffffff
[  318.750110] [<c0301a70>] (__irq_svc) from [<c030a288>] (arch_cpu_idle+0x24/0x3c)
[  318.757486] [<c030a288>] (arch_cpu_idle) from [<c038a480>] (do_idle+0x1b8/0x2a4)
[  318.764859] [<c038a480>] (do_idle) from [<c038a94c>] (cpu_startup_entry+0x18/0x1c)
[  318.772407] [<c038a94c>] (cpu_startup_entry) from [<c1e00f10>] (start_kernel+0x4cc/0x4fc)

Fixes: 844d7edc6a ("net: dsa: sja1105: Add a global sja1105_tagger_data structure")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 12:19:53 -04:00
Linus Walleij
e8521e53cc net: dsa: rtl8366: Check VLAN ID and not ports
There has been some confusion between the port number and
the VLAN ID in this driver. What we need to check for
validity is the VLAN ID, nothing else.

The current confusion came from assigning a few default
VLANs for default routing and we need to rewrite that
properly.

Instead of checking if the port number is a valid VLAN
ID, check the actual VLAN IDs passed in to the callback
one by one as expected.

Fixes: d8652956cf ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 12:09:23 -04:00
Shannon Nelson
e982ae6aa4 ionic: add lif_quiesce to wait for queue activity to stop
Even though we've already turned off the queue activity with
the ionic_qcq_disable(), we need to wait for any device queues
that are processing packets to drain down before we try to
flush our packets and tear down the queues.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:55:12 -04:00
Shannon Nelson
e95f922f4c ionic: implement ethtool set-fec
Wire up the --set-fec and --show-fec features in the ethtool
callbacks and pull the related code out of set_link_ksettings.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:55:12 -04:00
Shannon Nelson
780eded34c ionic: report users coalesce request
The user's request for an interrupt coalescing value gets
translated into a hardware value to be used with the NIC,
and was getting reported back based on the hw value, which,
due to hw tic resolution, could be reported as a different
number than what the user originally asked for.  This code
now tracks both the user request and what was put into the
hardware so we can report back to the user what they
requested.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:55:12 -04:00
Shannon Nelson
d229be4b27 ionic: use wait_on_bit_lock() rather than open code
Replace the open-coded ionic_wait_for_bit() with the
kernel's wait_on_bit_lock().

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:55:12 -04:00
Shannon Nelson
da0729e8d2 ionic: simplify returns in devlink info
There is no need for a goto in this bit of code.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:55:12 -04:00
Jiri Pirko
f1cdaa077c mlxsw: spectrum: Use per-netns netdevice notifier registration
The mlxsw_sp instance is not interested in events happening in other
network namespaces. So use "_net" variants for netdevice notifier
registration/unregistration and get only events which are happening in
the net the instance is in.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:48:44 -04:00
Michal Kubecek
8b6b82ad16 mlx5: avoid 64-bit division in dr_icm_pool_mr_create()
Recently added code introduces 64-bit division in dr_icm_pool_mr_create()
so that build on 32-bit architectures fails with

  ERROR: "__umoddi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined!

As the divisor is always a power of 2, we can use bitwise operation
instead.

Fixes: 29cf8febd1 ("net/mlx5: DR, ICM pool memory allocator")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02 11:08:20 -04:00
Stanislaw Gruszka
c91a9cfe9f rt2x00: initialize last_reset
Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not
possible to test H/W reset for first 5 minutes of system run.

Fixes: e403fa31ed ("rt2x00: add restart hw")
Reported-and-tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02 07:36:52 +03:00
Dongli Zhang
a761129e36 xen-netfront: do not use ~0U as error return value for xennet_fill_frags()
xennet_fill_frags() uses ~0U as return value when the sk_buff is not able
to cache extra fragments. This is incorrect because the return type of
xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for
ring buffer index.

In the situation when the rsp_cons is approaching 0xffffffff, the return
value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the
caller) would regard as error. As a result, queue->rx.rsp_cons is set
incorrectly because it is updated only when there is error. If there is no
error, xennet_poll() would be responsible to update queue->rx.rsp_cons.
Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose
queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL.
This leads to NULL pointer access in the next iteration to process rx ring
buffer entries.

The symptom is similar to the one fixed in
commit 00b368502d ("xen-netfront: do not assume sk_buff_head list is
empty in error handling").

This patch changes the return type of xennet_fill_frags() to indicate
whether it is successful or failed. The queue->rx.rsp_cons will be
always updated inside this function.

Fixes: ad4f15dc2c ("xen/netfront: don't bug in case of too many frags")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 21:49:51 -04:00
Prashant Malani
c01ebd6c46 r8152: Use guard clause and fix comment typos
Use a guard clause in tx_bottom() to reduce the indentation of the
do-while loop.

Also, fix a couple of spelling and grammatical mistakes in the
r8152_csum_workaround() function comment.

Change-Id: I460befde150ad92248fd85b0f189ec2df2ab8431
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 21:28:47 -04:00
Johan Hovold
8353da9fa6 hso: fix NULL-deref on tty open
Fix NULL-pointer dereference on tty open due to a failure to handle a
missing interrupt-in endpoint when probing modem ports:

	BUG: kernel NULL pointer dereference, address: 0000000000000006
	...
	RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso]
	...
	Call Trace:
	hso_start_serial_device+0xdc/0x140 [hso]
	hso_serial_open+0x118/0x1b0 [hso]
	tty_open+0xf1/0x490

Fixes: 542f548236 ("tty: Modem functions for the HSO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 21:21:10 -04:00
Johan Hovold
678799194a hso: fix NULL-deref on tty open
Fix NULL-pointer dereference on tty open due to a failure to handle a
missing interrupt-in endpoint when probing modem ports:

	BUG: kernel NULL pointer dereference, address: 0000000000000006
	...
	RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso]
	...
	Call Trace:
	hso_start_serial_device+0xdc/0x140 [hso]
	hso_serial_open+0x118/0x1b0 [hso]
	tty_open+0xf1/0x490

Fixes: 542f548236 ("tty: Modem functions for the HSO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 21:06:49 -04:00
Peter Fink
9fb137aef3 net: usb: ax88179_178a: allow optionally getting mac address from device tree
Adopt and integrate the feature to pass the MAC address via device tree
from asix_device.c (03fc5d4) also to other ax88179 based asix chips.
E.g. the bootloader fills in local-mac-address and the driver will then
pick up and use this MAC address.

Signed-off-by: Peter Fink <pfink@christ-es.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 15:19:28 -07:00
Oleksij Rempel
569aad4fcd net: ag71xx: fix mdio subnode support
This patch is syncing driver with actual devicetree documentation:
Documentation/devicetree/bindings/net/qca,ar71xx.txt
|Optional subnodes:
|- mdio : specifies the mdio bus, used as a container for phy nodes
|  according to phy.txt in the same directory

The driver was working with fixed phy without any noticeable issues. This bug
was uncovered by introducing dsa ar9331-switch driver.
Since no one reported this bug until now, I assume no body is using it
and this patch should not brake existing system.

Fixes: d51b6ce441 ("net: ethernet: add ag71xx driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:19:19 -07:00
Jose Abreu
56627336b6 net: stmmac: xgmac: Fix RSS writing wrong keys
Commit b6b6cc9acd, changed the call to dwxgmac2_rss_write_reg()
passing it the variable cfg->key[i].

As key is an u8 but we write 32 bits at a time we need to cast it into
an u32 so that the correct key values are written. Notice that the for
loop already takes this into account so we don't try to write past the
keys size.

Fixes: b6b6cc9acd ("net: stmmac: selftest: avoid large stack usage")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:38 -07:00
Jose Abreu
3c72d4d330 net: stmmac: xgmac: Fix RSS not writing all Keys to HW
The sizeof(cfg->key) is != ARRAY_SIZE(cfg->key). Fix it. This warning is
triggered when running with cc flag -Wsizeof-array-div.

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: 76067459c6 ("net: stmmac: Implement RSS and enable it in XGMAC core")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:38 -07:00
Jose Abreu
30300d9f91 net: stmmac: xgmac: Disable the Timestamp interrupt by default
We don't use it anyway as XGMAC only supports polling for timestamp (in
current SW implementation). This greatly reduces the system load by
reducing the number of interrupts.

Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Jose Abreu
3e2bf04fb0 net: stmmac: Do not stop PHY if WoL is enabled
If WoL is enabled we can't really stop the PHY, otherwise we will not
receive the WoL packet. Fix this by telling phylink that only the MAC is
down and only stop the PHY if WoL is not enabled.

Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Jose Abreu
14f347334b net: stmmac: Correctly take timestamp for PTPv2
The case for PTPV2_EVENT requires event packets to be captured so add
this setting to the list of enabled captures.

Fixes: 891434b18e ("stmmac: add IEEE PTPv1 and PTPv2 support.")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Jose Abreu
f79bfda375 net: stmmac: dwmac4: Always update the MAC Hash Filter
We need to always update the MAC Hash Filter so that previous entries
are invalidated.

Found out while running stmmac selftests.

Fixes: b8ef7020d6 ("net: stmmac: add support for hash table size 128/256 in dwmac4")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Jose Abreu
432439fef9 net: stmmac: selftests: Always use max DMA size in Jumbo Test
Although some XGMAC setups support frames larger than DMA size, some of
them may not. As we can't know before-hand which ones support let's use
the maximum DMA buffer size in the Jumbo Tests.

User can always reconfigure the MTU to achieve larger frames.

Fixes: 427849e8c3 ("net: stmmac: selftests: Add Jumbo Frame tests")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Jose Abreu
c11986b9fa net: stmmac: xgmac: Detect Hash Table size dinamically
Since commit b8ef7020d6 ("net: stmmac: add support for hash table size
128/256 in dwmac4"), we can detect the Hash Table dinamically.

Let's implement this feature in XGMAC cores and fix possible setups that
don't support the maximum size for Hash Table.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Jose Abreu
9a2ae7b396 net: stmmac: xgmac: Not all Unicast addresses may be available
Some setups may not have all Unicast addresses filters available. Let's
check this before trying to setup filters.

Fixes: 0efedbf11f ("net: stmmac: xgmac: Fix XGMAC selftests")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:12:37 -07:00
Wen Yang
f32eb9d804 net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name
of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.

Fixes: d8652956cf ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:02:56 -07:00
Wen Yang
d2c50b1cd9 net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name
of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
In both cases of success and failure, we need to release 'ports',
so clean up the code using goto.

fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 10:01:58 -07:00
Florian Westphal
895b5c9f20 netfilter: drop bridge nf reset from nf_reset
commit 174e23810c
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-10-01 18:42:15 +02:00
Arnd Bergmann
6de6d18591 ionic: select CONFIG_NET_DEVLINK
When no other driver selects the devlink library code, ionic
produces a link failure:

drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc':
ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc'
drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register':
ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register'

Add the same 'select' statement that the other drivers use here.

Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 09:24:05 -07:00
Prashant Malani
5f71c84038 r8152: Factor out OOB link list waits
The same for-loop check for the LINK_LIST_READY bit of an OOB_CTRL
register is used in several places. Factor these out into a single
function to reduce the lines of code.

Change-Id: I20e8f327045a72acc0a83e2d145ae2993ab62915
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 09:14:37 -07:00
Lorenzo Bianconi
55131dec2b net: socionext: netsec: always grab descriptor lock
Always acquire tx descriptor spinlock even if a xdp program is not loaded
on the netsec device since ndo_xdp_xmit can run concurrently with
netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen
loading a xdp program on a different device (e.g virtio-net) and
xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if
we do not have a xdp program on it.

Fixes: ba2b232108 ("net: netsec: add XDP support")
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01 09:07:47 -07:00
Navid Emamdoost
68501df92d net: dsa: sja1105: Prevent leaking memory
In sja1105_static_config_upload, in two cases memory is leaked: when
static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx
fails. In both cases config_buf should be released.

Fixes: 8aa9ebccae ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Fixes: 1a4c69406c ("net: dsa: sja1105: Prevent PHY jabbering during switch reset")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-30 17:24:43 -07:00
Vladimir Oltean
b6f2494d31 net: dsa: sja1105: Ensure PTP time for rxtstamp reconstruction is not in the past
Sometimes the PTP synchronization on the switch 'jumps':

  ptp4l[11241.155]: rms    8 max   16 freq -21732 +/-  11 delay   742 +/-   0
  ptp4l[11243.157]: rms    7 max   17 freq -21731 +/-  10 delay   744 +/-   0
  ptp4l[11245.160]: rms 33592410 max 134217731 freq +192422 +/- 8530253 delay   743 +/-   0
  ptp4l[11247.163]: rms 811631 max 964131 freq +10326 +/- 557785 delay   743 +/-   0
  ptp4l[11249.166]: rms 261936 max 533876 freq -304323 +/- 126371 delay   744 +/-   0
  ptp4l[11251.169]: rms 48700 max 57740 freq -20218 +/- 30532 delay   744 +/-   0
  ptp4l[11253.171]: rms 14570 max 30163 freq  -5568 +/- 7563 delay   742 +/-   0
  ptp4l[11255.174]: rms 2914 max 3440 freq -22001 +/- 1667 delay   744 +/-   1
  ptp4l[11257.177]: rms  811 max 1710 freq -22653 +/- 451 delay   744 +/-   1
  ptp4l[11259.180]: rms  177 max  218 freq -21695 +/-  89 delay   741 +/-   0
  ptp4l[11261.182]: rms   45 max   92 freq -21677 +/-  32 delay   742 +/-   0
  ptp4l[11263.186]: rms   14 max   32 freq -21733 +/-  11 delay   742 +/-   0
  ptp4l[11265.188]: rms    9 max   14 freq -21725 +/-  12 delay   742 +/-   0
  ptp4l[11267.191]: rms    9 max   16 freq -21727 +/-  13 delay   742 +/-   0
  ptp4l[11269.194]: rms    6 max   15 freq -21726 +/-   9 delay   743 +/-   0
  ptp4l[11271.197]: rms    8 max   15 freq -21728 +/-  11 delay   743 +/-   0
  ptp4l[11273.200]: rms    6 max   12 freq -21727 +/-   8 delay   743 +/-   0
  ptp4l[11275.202]: rms    9 max   17 freq -21720 +/-  11 delay   742 +/-   0
  ptp4l[11277.205]: rms    9 max   18 freq -21725 +/-  12 delay   742 +/-   0

Background: the switch only offers partial RX timestamps (24 bits) and
it is up to the driver to read the PTP clock to fill those timestamps up
to 64 bits. But the PTP clock readout needs to happen quickly enough (in
0.135 seconds, in fact), otherwise the PTP clock will wrap around 24
bits, condition which cannot be detected.

Looking at the 'max 134217731' value on output line 3, one can see that
in hex it is 0x8000003. Because the PTP clock resolution is 8 ns,
that means 0x1000000 in ticks, which is exactly 2^24. So indeed this is
a PTP clock wraparound, but the reason might be surprising.

What is going on is that sja1105_tstamp_reconstruct(priv, now, ts)
expects a "now" time that is later than the "ts" was snapshotted at.
This, of course, is obvious: we read the PTP time _after_ the partial RX
timestamp was received. However, the workqueue is processing frames from
a skb queue and reuses the same PTP time, read once at the beginning.
Normally the skb queue only contains one frame and all goes well. But
when the skb queue contains two frames, the second frame that gets
dequeued might have been partially timestamped by the RX MAC _after_ we
had read our PTP time initially.

The code was originally like that due to concerns that SPI access for
PTP time readout is a slow process, and we are time-constrained anyway
(aka: premature optimization). But some timing analysis reveals that the
time spent until the RX timestamp is completely reconstructed is 1 order
of magnitude lower than the 0.135 s deadline even under worst-case
conditions. So we can afford to read the PTP time for each frame in the
RX timestamping queue, which of course ensures that the full PTP time is
in the partial timestamp's future.

Fixes: f3097be21b ("net: dsa: sja1105: Add a state machine for RX timestamping")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-30 17:20:50 -07:00
David S. Miller
3755ee2257 Merge tag 'ieee802154-for-davem-2019-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2019-09-28

An update from ieee802154 for your *net* tree.

Three driver fixes. Navid Emamdoost fixed a memory leak on an error
path in the ca8210 driver, Johan Hovold fixed a use-after-free found
by syzbot in the atusb driver and Christophe JAILLET makes sure
__skb_put_data is used instead of memcpy in the mcr20a driver

I switched from branches to tags here to be pulled from. So far not
annotated and not signed. Once I fixed my scripts it should contain
this messages as annotations. If you want it signed as well just tell
me. If there are any problems let me know.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-30 17:14:45 -07:00
Michal Vokáč
7ae6d93c8f net: dsa: qca8k: Use up to 7 ports for all operations
The QCA8K family supports up to 7 ports. So use the existing
QCA8K_NUM_PORTS define to allocate the switch structure and limit all
operations with the switch ports.

This was not an issue until commit 0394a63acf ("net: dsa: enable and
disable all ports") disabled all unused ports. Since the unused ports 7-11
are outside of the correct register range on this switch some registers
were rewritten with invalid content.

Fixes: 6b93fb4648 ("net-next: dsa: add new driver for qca8xxx family")
Fixes: a0c02161ec ("net: dsa: variable number of ports")
Fixes: 0394a63acf ("net: dsa: enable and disable all ports")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-30 11:06:38 -07:00
Linus Torvalds
02dc96ef6c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...
2019-09-28 17:47:33 -07:00
Navid Emamdoost
6402939ec8 ieee802154: ca8210: prevent memory leak
In ca8210_probe the allocated pdata needs to be assigned to
spi_device->dev.platform_data before calling ca8210_get_platform_data.
Othrwise when ca8210_get_platform_data fails pdata cannot be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-09-27 21:57:42 +02:00
Colin Ian King
faeacb6ddb net: tap: clean up an indentation issue
There is a statement that is indented too deeply, remove
the extraneous tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:58:35 +02:00
Navid Emamdoost
78beef629f nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
In nfp_abm_u32_knode_replace if the allocation for match fails it should
go to the error handling instead of returning. Updated other gotos to
have correct errno returned, too.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:55:51 +02:00
Danielle Ratson
52feb8b588 mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
The ASIC can only mirror a packet to one port, but when user is trying
to set more than one mirror action, it doesn't fail.

Add a check if more than one mirror action was specified per rule and if so,
fail for not being supported.

Fixes: d0d13c1858 ("mlxsw: spectrum_acl: Add support for mirror action")
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:33:19 +02:00
Ido Schimmel
979b9b251a mlxsw: spectrum: Clear VLAN filters during port initialization
When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.

The above did not matter much until commit b5ce611fd9 ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.

Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.

Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.

Fixes: b5ce611fd9 ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:33:19 +02:00
Colin Ian King
4208966f65 net: ena: clean up indentation issue
There memset is indented incorrectly, remove the extraneous tabs.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:32:02 +02:00
Hans Andersson
407d8098cb net: phy: micrel: add Asym Pause workaround for KSZ9021
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric
Pause capability is set. This issue is described in a Silicon Errata
(DS80000691D or DS80000692D), which advises to always disable the
capability.

Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause.
This patch apply the same workaround as the one for KSZ9031.

Fixes: 3aed3e2a14 ("net: phy: micrel: add Asym Pause workaround")
Signed-off-by: Hans Andersson <hans.andersson@cellavision.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:27:26 +02:00
Kunihiko Hayashi
fd4a8093ec net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
Until calling register_netdev(), ndev->dev_name isn't specified, and
netdev_err() displays "(unnamed net_device)".

    ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting
    ave: probe of 65000000.ethernet failed with error -22

This replaces netdev_err() with dev_err() before calling register_netdev().

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:26:28 +02:00
Marek Vasut
a3aa6e65be net: dsa: microchip: Always set regmap stride to 1
The regmap stride is set to 1 for regmap describing 8bit registers already.
However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This
is not correct, as the switch protocol supports unaligned register reads
and writes and the KSZ87xx even uses such unaligned register accesses to
read e.g. MIB counter.

This patch fixes MIB counter access on KSZ87xx.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Fixes: 46558d601c ("net: dsa: microchip: Initial SPI regmap support")
Fixes: 255b59ad0d ("net: dsa: microchip: Factor out regmap config generation into common header")
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:21:07 +02:00
Navid Emamdoost
8ce39eb5a6 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.

Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:12:03 +02:00
Navid Emamdoost
8572cea146 nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of
intermediate allocations or initializations fail memory is leaked.
requiered releases are added.

Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:10:52 +02:00
David Ahern
dac91170f8 vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
A user reported that vrf create fails when IPv6 is disabled at boot using
'ipv6.disable=1':
   https://bugzilla.kernel.org/show_bug.cgi?id=204903

The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to
the check in vrf_fib_rule if ipv6_mod_enabled is disabled.

Fixes: e4a38c0c4b ("ipv6: add vrf table handling code for ipv6 mcast")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 20:07:05 +02:00
Andrew Lunn
2b6fd3ea43 net: dsa: qca8k: Fix port enable for CPU port
The CPU port does not have a PHY connected to it. So calling
phy_support_asym_pause() results in an Opps. As with other DSA
drivers, add a guard that the port is a user port.

Reported-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 0394a63acf ("net: dsa: enable and disable all ports")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:30:58 +02:00
Dan Carpenter
231042181d net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()
The "gmac->phy_mode" variable is an enum and in this context GCC will
treat it as an unsigned int so the error handling will never be
triggered.

Fixes: b1c17215d7 ("stmmac: add ipq806x glue layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:21:44 +02:00
Dan Carpenter
1a4b62a0b8 net: nixge: Fix a signedness bug in nixge_probe()
The "priv->phy_mode" is an enum and in this context GCC will treat it
as an unsigned int so it can never be less than zero.

Fixes: 492caffa8a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:20:36 +02:00
Dan Carpenter
73e211e11b net: axienet: fix a signedness bug in probe
The "lp->phy_mode" is an enum but in this context GCC treats it as an
unsigned int so the error handling is never triggered.

Fixes: ee06b1728b ("net: axienet: add support for standard phy-mode binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:17:22 +02:00
Dan Carpenter
f10210517a net: stmmac: dwmac-meson8b: Fix signedness bug in probe
The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.

Fixes: 566e825162 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:15:11 +02:00
Dan Carpenter
7f9e88e6ef net: socionext: Fix a signedness bug in ave_probe()
The "phy_mode" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.

Fixes: 4c270b55a5 ("net: ethernet: socionext: add AVE ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:14:14 +02:00
Dan Carpenter
ced81eb84d enetc: Fix a signedness bug in enetc_of_get_phy()
The "priv->if_mode" is type phy_interface_t which is an enum.  In this
context GCC will treat the enum as an unsigned int so this error
handling is never triggered.

Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:03:41 +02:00
Dan Carpenter
bd55f8ddbc net: netsec: Fix signedness bug in netsec_probe()
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as an unsigned int so the error handling is never
triggered.

Fixes: 533dd11a12 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:03:07 +02:00
Dan Carpenter
25a584955f net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe()
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as unsigned so the error handling will never be
triggered.

Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:02:24 +02:00
Dan Carpenter
002dfe8085 net: hisilicon: Fix signedness bug in hix5hd2_dev_probe()
The "priv->phy_mode" variable is an enum and in this context GCC will
treat it as unsigned to the error handling will never trigger.

Fixes: 57c5bc9ad7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:01:36 +02:00
Dan Carpenter
2861831476 cxgb4: Signedness bug in init_one()
The "chip" variable is an enum, and it's treated as unsigned int by GCC
in this context so the error handling isn't triggered.

Fixes: e8d452923a ("cxgb4: clean up init_one")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 10:00:16 +02:00
Dan Carpenter
31aefe14bc net: aquantia: Fix aq_vec_isr_legacy() return value
The irqreturn_t type is an enum or an unsigned int in GCC.  That
creates to problems because it can't detect if the
self->aq_hw_ops->hw_irq_read() call fails and at the end the function
always returns IRQ_HANDLED.

drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero.
drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)'

Fixes: 970a2e9864 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27 09:59:16 +02:00
Denis Efremov
77c0e745bd wimax/i2400m: remove unlikely() from WARN*() condition
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-6-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26 10:10:30 -07:00
David S. Miller
5a2a828d81 wireless-drivers fixes for 5.4
First set of fixes for 5.4 sent during the merge window. Most are
 regressions fixes but the mt7615 problem has been since it was merged.
 
 iwlwifi
 
 * fix a build regression related CONFIG_THERMAL
 
 * avoid using GEO_TX_POWER_LIMIT command on certain firmware versions
 
 rtw88
 
 * fixes for skb leaks
 
 zd1211rw
 
 * fix a compiler warning on 32 bit
 
 mt76
 
 * fix the firmware paths for mt7615 to match with linux-firmware
 
 wil6210
 
 * fix use of skb after free
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdjLN3AAoJEG4XJFUm622bsBcH/1A/srmEN3bME86p9j0DS1Wb
 A/8KPP88q9gczIDg+uZQCw1rTqHUrqkgbPxVCa64tKdPjqioRc9nW4CVhKh2OLTy
 88Bwh/mJhxfh/+TTfYf397OsHr9NEVaFnEqjYeUxtyhRoZriUmAtKSd4/689czDP
 AOdbkXShe8pUS+UvpizfpOHP28j4TbFOzcWn8qcGm1gqfuCHan+giaSw073vz+r4
 fagOz470huyqCwx8LB21IzTCunox20W4IfN/G2AMoKx7tE9XbYr6kRR8vawffwm2
 FVyhlnibkRQnRv77thg+zJZQ6UpJybsfM8Izpn1kTDFiRChNqvMtOKboz+IQOHg=
 =4i7U
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-for-davem-2019-09-26' of https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.4

First set of fixes for 5.4 sent during the merge window. Most are
regressions fixes but the mt7615 problem has been since it was merged.

iwlwifi

* fix a build regression related CONFIG_THERMAL

* avoid using GEO_TX_POWER_LIMIT command on certain firmware versions

rtw88

* fixes for skb leaks

zd1211rw

* fix a compiler warning on 32 bit

mt76

* fix the firmware paths for mt7615 to match with linux-firmware

wil6210

* fix use of skb after free
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26 18:00:26 +02:00
Thierry Reding
4f28bd956e net: stmmac: Fix page pool size
The size of individual pages in the page pool in given by an order. The
order is the binary logarithm of the number of pages that make up one of
the pages in the pool. However, the driver currently passes the number
of pages rather than the order, so it ends up wasting quite a bit of
memory.

Fix this by taking the binary logarithm and passing that in the order
field.

Fixes: 2af6106ae9 ("net: stmmac: Introducing support for Page Pool")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26 09:27:47 +02:00
Xin Long
ba56d8ce38 macsec: drop skb sk before calling gro_cells_receive
Fei Liu reported a crash when doing netperf on a topo of macsec
dev over veth:

  [  448.919128] refcount_t: underflow; use-after-free.
  [  449.090460] Call trace:
  [  449.092895]  refcount_sub_and_test+0xb4/0xc0
  [  449.097155]  tcp_wfree+0x2c/0x150
  [  449.100460]  ip_rcv+0x1d4/0x3a8
  [  449.103591]  __netif_receive_skb_core+0x554/0xae0
  [  449.108282]  __netif_receive_skb+0x28/0x78
  [  449.112366]  netif_receive_skb_internal+0x54/0x100
  [  449.117144]  napi_gro_complete+0x70/0xc0
  [  449.121054]  napi_gro_flush+0x6c/0x90
  [  449.124703]  napi_complete_done+0x50/0x130
  [  449.128788]  gro_cell_poll+0x8c/0xa8
  [  449.132351]  net_rx_action+0x16c/0x3f8
  [  449.136088]  __do_softirq+0x128/0x320

The issue was caused by skb's true_size changed without its sk's
sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the
skb is being freed and the skb's truesize is subtracted from its
sk's sk_wmem_alloc in tcp_wfree(), underflow occurs.

macsec is calling gro_cells_receive() to receive a packet, which
actually requires skb->sk to be NULL. However when macsec dev is
over veth, it's possible the skb->sk is still set if the skb was
not unshared or expanded from the peer veth.

ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy,
but it is too late for macsec's calling gro_cells_receive(). So
fix it by dropping the skb's sk earlier on rx path of macsec.

Fixes: 5491e7c6b1 ("macsec: enable GRO and RPS on macsec devices")
Reported-by: Xiumei Mu <xmu@redhat.com>
Reported-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26 09:25:03 +02:00
David S. Miller
2dbf45d135 mlx5-fixes-2019-09-24
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl2J5AAACgkQSD+KveBX
 +j7Jqwf7BWVC7ul3q19W2IkHjo+ts03eB43n+egQR8f0X5QJ9ClG167OA+JQd+9d
 y/2rJ5tWtFU7oWJOweSWHJXlSIK8iRTEe0w7fFWCQ9P1ne7BsO9tC6nTJ/X7rfc+
 UP/+iLcMi10JnNGdqk+dZs/nSNNw24fH4Drd1WC2YhMxZWVKeChxlSnez40I7Rdq
 ij8SiL3sCxt+486IYENVXnpR849gO/K5XY5qasHh6QGQzFXAOlecp9zUXyDyEyL+
 L6uDOTmzcnl6CHMgNfyEXqu+ZTo+rnycg6Yx0aaPCz92nMgo2zXwg/KoeT0zwJg5
 mfaXvFlgM0BIGnAtETP44jTq4vKQow==
 =0IpF
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2019-09-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-09-24

This series introduces some fixes to mlx5 driver.
For more information please see tag log below.

Please pull and let me know if there is any problem.

For -stable v4.20:
 ('net/mlx5e: Fix traffic duplication in ethtool steering')

For -stable v4.19:
 ('net/mlx5: Add device ID of upcoming BlueField-2')

For -stable v5.3:
 ('net/mlx5e: Fix matching on tunnel addresses type')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26 09:08:18 +02:00
Krzysztof Kozlowski
02bc5eb990 drivers: net: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26 08:56:17 +02:00
Shubhrajyoti Datta
99dcb8432a net: macb: Remove dead code
macb_64b_desc is always called when HW_DMA_CAP_64B is defined.
So the return NULL can never be reached. Remove the dead code.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 13:59:43 +02:00
Jose Abreu
b0ce902feb net: stmmac: selftests: Flow Control test can also run with ASYM Pause
The Flow Control selftest is also available with ASYM Pause. Lets add
this check to the test and fix eventual false positive failures.

Fixes: 091810dbde ("net: stmmac: Introduce selftests support")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 13:58:25 +02:00
YueHaibing
9f5c44cf61 gianfar: Make reset_gfar static
Fix sparse warning:

drivers/net/ethernet/freescale/gianfar.c:2070:6:
 warning: symbol 'reset_gfar' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 13:56:41 +02:00
Takeshi Misawa
4c247de564 ppp: Fix memory leak in ppp_write
When ppp is closing, __ppp_xmit_process() failed to enqueue skb
and skb allocated in ppp_write() is leaked.

syzbot reported :
BUG: memory leak
unreferenced object 0xffff88812a17bc00 (size 224):
  comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline]
    [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline]
    [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574
    [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197
    [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline]
    [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502
    [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494
    [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline]
    [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542
    [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611
    [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline]
    [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline]
    [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620
    [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by freeing skb, if ppp is closing.

Fixes: 6d066734e9 ("ppp: avoid loop in xmit recursion detection code")
Reported-and-tested-by: syzbot+d9c8bf24e56416d7ce2c@syzkaller.appspotmail.com
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Tested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 13:45:03 +02:00
Juliet Kim
7ed5b31f4a net/ibmvnic: prevent more than one thread from running in reset
The current code allows more than one thread to run in reset. This can
corrupt struct adapter data. Check adapter->resetting before performing
a reset, if there is another reset running delay (100 msec) before trying
again.

Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 13:41:41 +02:00
Juliet Kim
b27507bb59 net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run
Commit a5681e20b5 ("net/ibmnvic: Fix deadlock problem in reset")
made the change to hold the RTNL lock during a reset to avoid deadlock
but linkwatch_event is fired during the reset and needs the RTNL lock.
That keeps linkwatch_event process from proceeding until the reset
is complete. The reset process cannot tolerate the linkwatch_event
processing after reset completes, so release the RTNL lock during the
process to allow a chance for linkwatch_event to run during reset.
This does not guarantee that the linkwatch_event will be processed as
soon as link state changes, but is an improvement over the current code
where linkwatch_event processing is always delayed, which prevents
transmissions on the device from being deactivated leading transmit
watchdog timer to time-out.

Release the RTNL lock before link state change and re-acquire after
the link state change to allow linkwatch_event to grab the RTNL lock
and run during the reset.

Fixes: a5681e20b5 ("net/ibmnvic: Fix deadlock problem in reset")
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 13:41:41 +02:00
Christophe JAILLET
21a045e430 ieee802154: mcr20a: simplify a bit 'mcr20a_handle_rx_read_buf_complete()'
Use a 'skb_put_data()' variant instead of rewritting it.
The __skb_put_data variant is safe here. It is obvious that the skb can
not overflow. It has just been allocated a few lines above with the same
'len'.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Xue Liu <liuxuenetmail@gmail.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-09-25 08:16:51 +02:00
Dan Carpenter
2b481835cf wil6210: use after free in wil_netif_rx_any()
The debug code dereferences "skb" to print "skb->len" so we have to
print the message before we free "skb".

Fixes: f99fe49ff3 ("wil6210: add wil_netif_rx() helper function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-25 09:12:20 +03:00
Stephen Hemminger
5aafeb74b5 skge: fix checksum byte order
Running old skge driver on PowerPC causes checksum errors
because hardware reported 1's complement checksum is in little-endian
byte order.

Reported-by: Benoit <benoit.sansoni@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-24 16:53:19 +02:00
Uwe Kleine-König
02a0704683 arcnet: provide a buffer big enough to actually receive packets
struct archdr is only big enough to hold the header of various types of
arcnet packets. So to provide enough space to hold the data read from
hardware provide a buffer large enough to hold a packet with maximal
size.

The problem was noticed by the stack protector which makes the kernel
oops.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-24 16:48:31 +02:00
Luca Coelho
fddbfeece9 iwlwifi: fw: don't send GEO_TX_POWER_LIMIT command to FW version 36
The intention was to have the GEO_TX_POWER_LIMIT command in FW version
36 as well, but not all 8000 family got this feature enabled.  The
8000 family is the only one using version 36, so skip this version
entirely.  If we try to send this command to the firmwares that do not
support it, we get a BAD_COMMAND response from the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151.

Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24 17:46:51 +03:00
Lorenzo Bianconi
9d4d0d06bb mt76: mt7615: fix mt7615 firmware path definitions
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in
linux-firmware repository. Because of this mt7615 won't work on regular
distributions like Ubuntu. Fix path definitions.  Moreover remove useless
firmware name pointers and use definitions directly

Fixes: 04b8e65922 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24 17:45:30 +03:00
Dmytro Linkin
fe1587a7de net/mlx5e: Fix matching on tunnel addresses type
In mlx5 parse_tunnel_attr() function dispatch on encap IP address type
is performed by directly checking flow_rule_match_key() on
FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on
FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in
union, first check is always true if any type of encap address is set,
which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5.
Determine correct IP address type by checking control key first and if
it set, take address type from match.key->addr_type.

Fixes: d1bda7eecd ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24 12:38:08 +03:00
Saeed Mahameed
d22fcc806b net/mlx5e: Fix traffic duplication in ethtool steering
Before this patch, when adding multiple ethtool steering rules with
identical classification, the driver used to append the new destination
to the already existing hw rule, which caused the hw to forward the
traffic to all destinations (rx queues).

Here we avoid this by setting the "no append" mlx5 fs core flag when
adding a new ethtool rule.

Fixes: 6dc6071cfc ("net/mlx5e: Add ethtool flow steering support")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24 12:38:08 +03:00
Bodong Wang
d19a79ee38 net/mlx5: Add device ID of upcoming BlueField-2
Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx
network controller. Its VFs will be using the generic VF device ID:
0x101e "ConnectX Family mlx5Gen Virtual Function".

Fixes: 2e9d3e83ab ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24 12:38:07 +03:00
Alaa Hleihel
640bdb1fdb net/mlx5: DR, Allow matching on vport based on vhca_id
In case source_eswitch_owner_vhca_id is given as a match,
the source_vport (vhca_id) will be set in case vhca_id_valid.

This will allow matching on peer vports, vports that belong
to the other pf.

Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24 12:38:07 +03:00
Alex Vesker
48cbde4bd2 net/mlx5: DR, Fix getting incorrect prev node in ste_free
When we free an STE and the STE is in the middle of collision
list, the prev_ste was obtained incorrectly from the list.
To avoid such issues list_entry calls replaced with standard list API.

Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24 12:38:07 +03:00
Alex Vesker
cc5fd15fc5 net/mlx5: DR, Remove redundant vport number from action
The vport number is part of the vport_cap, there is no reason
to store in a separate variable on the vport.

Fixes: 9db810ed2d ("net/mlx5: DR, Expose steering action functionality")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-24 12:38:07 +03:00
Yan-Hsuan Chuang
0b8dc6abbd rtw88: configure firmware after HCI started
After firmware has been downloaded, driver should send
some information to it through H2C commands. Those H2C
commands are transmitted through TX path.

But before HCI has been started, the TX path is not
working completely. Such as PCI interfaces, the interrupts
are not enabled, hence TX interrupts will not be issued
after H2C skb has been DMAed to the device. And the H2C
skbs will not be released until the device is powered off.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24 10:55:40 +03:00
Linus Torvalds
299d14d4c3 pci-v5.4-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl2JNVAUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vyTOA/9EZeyS7J+ZcOwihWz5vNijf0kfpKp
 /jZ9VF9nHjsL9Pw3/Fzha605Ssrtwcqge8g/sze9f0g/pxZk99lLHokE6dEOurEA
 GyKpNNMdiBol4YZMCsSoYji0MpwW0uMCuASPMiEwv2LxZ72A2Tu1RbgYLU+n4m1T
 fQldDTxsUMXc/OH/8SL8QDEh6o8qyDRhmSXFAOv8RGqN8N3iUwVwhQobKpwpmEvx
 ddzqWMS8f91qkhIKO7fgc9P4NI/7yI7kkF+wcdwtfiMO8Qkr4IdcdF7qwNVAtpKA
 A+sMRi59i2XxDTqRFx+wXXMa+rt+Pf1pucv77SO74xXWwpuXSxLVDYjULP1YQugK
 FTBo4SNmico/ts+n5cgm+CGMq2P2E29VYeqkI1Un6eDDvQnQlBgQdpdcBoadJ0rW
 y31OInjhRJC1ZK5bATKfCMbmB+VQxFsbyeUA7PBlrALyAmXZfw30iNxX9iHBhWqc
 myPNVEJJGp0cWTxGxMAU9MhelzeQxDAd+Eb44J5gv51bx0w9yqmZHECSDrOVdtYi
 HpOyI7E3Cb8m23BOHvCdB/v8igaYMZl08LUUJqu1S9mFclYyYVuOOIB04Yc2Qrx1
 3PHtT8TC47FbWuzKwo12RflzoAiNShJGw+tNKo6T1jC+r5jdbKWWtTnsoRqbSfaG
 rG5RJpB7EuQSP1Y=
 =/xB3
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...
2019-09-23 19:16:01 -07:00
Nishad Kamdar
34b4688425 net: dsa: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header file for Distributed Switch Architecture drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-22 15:25:08 -07:00
Nishad Kamdar
938e4d49c2 net: dsa: b53: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header file for Broadcom BCM53xx managed switch driver.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-22 15:24:51 -07:00
Dan Carpenter
73a63ee995 ionic: Fix an error code in ionic_lif_alloc()
We need to set the error code on this path.  Otherwise it probably
results in a NULL dereference down the line.

Fixes: aa3198819b ("ionic: Add RSS support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-22 14:16:15 -07:00
Mao Wenan
ff04cfbaa2 net: ena: Select DIMLIB for ENA_ETHERNET
If CONFIG_ENA_ETHERNET=y and CONFIG_DIMLIB=n,
below erros can be found:
drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_dim_work':
ena_netdev.c:(.text+0x21cc): undefined reference to `net_dim_get_rx_moderation'
ena_netdev.c:(.text+0x21cc): relocation truncated to
fit: R_AARCH64_CALL26 against undefined symbol `net_dim_get_rx_moderation'
drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_io_poll':
ena_netdev.c:(.text+0x7bd4): undefined reference to `net_dim'
ena_netdev.c:(.text+0x7bd4): relocation truncated to fit:
R_AARCH64_CALL26 against undefined symbol `net_dim'

After commit 282faf61a0 ("net: ena: switch to dim algorithm for rx adaptive
interrupt moderation"), it introduces dim algorithm, which configured by CONFIG_DIMLIB.
So, this patch is to select DIMLIB for ENA_ETHERNET.

Fixes: 282faf61a0 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-22 14:05:18 -07:00
Christophe JAILLET
24ccb0ab95 qede: qede_fp: simplify a bit 'qede_rx_build_skb()'
Use 'skb_put_data()' instead of rewritting it.
This improves readability.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 20:15:03 -07:00
Arnd Bergmann
b6b6cc9acd net: stmmac: selftest: avoid large stack usage
Putting a struct stmmac_rss object on the stack is a bad idea,
as it exceeds the warning limit for a stack frame on 32-bit architectures:

drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1221:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l3filt' [-Werror,-Wframe-larger-than=]
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1338:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l4filt' [-Werror,-Wframe-larger-than=]

As the object is the trivial empty case, change the called function
to accept a NULL pointer to mean the same thing and remove the
large variable in the two callers.

Fixes: 4647e02119 ("net: stmmac: selftests: Add selftest for L3/L4 Filters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 19:46:14 -07:00
Mao Wenan
a8d570de0c net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS
If CONFIG_NET_DSA_SJA1105_TAS=y and CONFIG_NET_SCH_TAPRIO=n,
below error can be found:
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio':
sja1105_tas.c:(.text+0x318): undefined reference to `taprio_offload_free'
sja1105_tas.c:(.text+0x590): undefined reference to `taprio_offload_get'
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown':
sja1105_tas.c:(.text+0x610): undefined reference to `taprio_offload_free'
make: *** [vmlinux] Error 1

sja1105_tas needs tc-taprio, so this patch add the dependency for it.

Fixes: 317ab5b86c ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 19:41:19 -07:00
Arnd Bergmann
b0e1ee435a net: remove netx ethernet driver
The ARM netx platform got removed in 5.3, so this driver
is now useless.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 19:08:31 -07:00
Peter Mamonov
e47488b2df net/phy: fix DP83865 10 Mbps HDX loopback disable function
According to the DP83865 datasheet "the 10 Mbps HDX loopback can be
disabled in the expanded memory register 0x1C0.1". The driver erroneously
used bit 0 instead of bit 1.

Fixes: 4621bf1298 ("phy: Add file missed in previous commit.")
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 18:21:52 -07:00
Bjørn Mork
8d3d7c2029 usbnet: ignore endpoints with invalid wMaxPacketSize
Endpoints with zero wMaxPacketSize are not usable for transferring
data. Ignore such endpoints when looking for valid in, out and
status pipes, to make the drivers more robust against invalid and
meaningless descriptors.

The wMaxPacketSize of these endpoints are used for memory allocations
and as divisors in many usbnet minidrivers. Avoiding zero is therefore
critical.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 12:06:55 -07:00
Bjørn Mork
3fe4b33513 cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize
Endpoints with zero wMaxPacketSize are not usable for transferring
data. Ignore such endpoints when looking for valid in, out and
status pipes, to make the driver more robust against invalid and
meaningless descriptors.

The wMaxPacketSize of the out pipe is used as divisor. So this change
fixes a divide-by-zero bug.

Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-21 12:06:49 -07:00
Linus Torvalds
018c6837f3 RDMA subsystem updates for 5.4
This cycle mainly saw lots of bug fixes and clean up code across the core
 code and several drivers, few new functional changes were made.
 
 - Many cleanup and bug fixes for hns
 
 - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
   bnxt_re, efa
 
 - Share the query_port code between all the iWarp drivers
 
 - General rework and cleanup of the ODP MR umem code to fit better with
   the mmu notifier get/put scheme
 
 - Support rdma netlink in non init_net name spaces
 
 - mlx5 support for XRC devx and DC ODP
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl2A1ugACgkQOG33FX4g
 mxp+EQ//Ug8CyyDs40SGZztItoGghuQ4TVA2pXtuZ9LkFVJRWhYPJGOadHIYXqGO
 KQJJpZPQ02HTZUPWBZNKmD5bwHfErm4cS73/mVmUpximnUqu/UsLRJp8SIGmBg1D
 W1Lz1BJX24MdV8aUnChYvdL5Hbl52q+BaE99Z0haOvW7I3YnKJC34mR8m/A5MiRf
 rsNIZNPHdq2U6pKLgCbOyXib8yBcJQqBb8x4WNAoB1h4MOx+ir5QLfr3ozrZs1an
 xXgqyiOBmtkUgCMIpXC4juPN/6gw3Y5nkk2VIWY+MAY1a7jZPbI+6LJZZ1Uk8R44
 Lf2KSzabFMMYGKJYE1Znxk+JWV8iE+m+n6wWEfRM9l0b4gXXbrtKgaouFbsLcsQA
 CvBEQuiFSO9Kq01JPaAN1XDmhqyTarG6lHjXnW7ifNlLXnPbR1RJlprycExOhp0c
 axum5K2fRNW2+uZJt+zynMjk2kyjT1lnlsr1Rbgc4Pyionaiydg7zwpiac7y/bdS
 F7/WqdmPiff78KMi187EF5pjFqMWhthvBtTbWDuuxaxc2nrXSdiCUN+96j1amQUH
 yU/7AZzlnKeKEQQCR4xddsSs2eTrXiLLFRLk9GCK2eh4cUN212eHTrPLKkQf1cN+
 ydYbR2pxw3B38LCCNBy+bL+u7e/Tyehs4ynATMpBuEgc5iocTwE=
 =zHXW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull RDMA subsystem updates from Jason Gunthorpe:
 "This cycle mainly saw lots of bug fixes and clean up code across the
  core code and several drivers, few new functional changes were made.

   - Many cleanup and bug fixes for hns

   - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
     bnxt_re, efa

   - Share the query_port code between all the iWarp drivers

   - General rework and cleanup of the ODP MR umem code to fit better
     with the mmu notifier get/put scheme

   - Support rdma netlink in non init_net name spaces

   - mlx5 support for XRC devx and DC ODP"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA: Fix double-free in srq creation error flow
  RDMA/efa: Fix incorrect error print
  IB/mlx5: Free mpi in mp_slave mode
  IB/mlx5: Use the original address for the page during free_pages
  RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
  RDMA/hns: Package operations of rq inline buffer into separate functions
  RDMA/hns: Optimize cmd init and mode selection for hip08
  IB/hfi1: Define variables as unsigned long to fix KASAN warning
  IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
  IB/hfi1: Add traces for TID RDMA READ
  RDMA/siw: Relax from kmap_atomic() use in TX path
  IB/iser: Support up to 16MB data transfer in a single command
  RDMA/siw: Fix page address mapping in TX path
  RDMA: Fix goto target to release the allocated memory
  RDMA/usnic: Avoid overly large buffers on stack
  RDMA/odp: Add missing cast for 32 bit
  RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
  Documentation/infiniband: update name of some functions
  RDMA/cma: Fix false error message
  RDMA/hns: Fix wrong assignment of qp_access_flags
  ...
2019-09-21 10:26:24 -07:00
Geert Uytterhoeven
6355592e6b zd1211rw: zd_usb: Use "%zu" to format size_t
On 32-bit:

    drivers/net/wireless/zydas/zd1211rw/zd_usb.c: In function ‘check_read_regs’:
    drivers/net/wireless/zydas/zd1211rw/zd_def.h:18:25: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=]
      dev_printk(level, dev, "%s() " fmt, __func__, ##args)
			     ^~~~~~~
    drivers/net/wireless/zydas/zd1211rw/zd_def.h:22:4: note: in expansion of macro ‘dev_printk_f’
	dev_printk_f(KERN_DEBUG, dev, fmt, ## args)
	^~~~~~~~~~~~
    drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1635:3: note: in expansion of macro ‘dev_dbg_f’
       dev_dbg_f(zd_usb_dev(usb),
       ^~~~~~~~~
    drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1636:51: note: format string is defined here
	 "error: actual length %d less than expected %ld\n",
						     ~~^
						     %d

Fixes: 84b0b66352 ("zd1211rw: zd_usb: Use struct_size() helper")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21 08:57:35 +03:00
Yan-Hsuan Chuang
0e41edcdfe rtw88: pci: release tx skbs DMAed when stop
Interrupt is disabled to stop PCI, which means the skbs
queued for each TX ring will not be released via DMA
interrupt. To avoid those skbs remained being left in
the skb queue until PCI has been removed, driver needs
to release skbs by itself.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21 08:47:27 +03:00
Yan-Hsuan Chuang
dc579ca5cf rtw88: pci: extract skbs free routine for trx rings
These skbs free routines could be used when driver wants
to stop PCI bus, because some of the skbs remained in the
queue may not have been returned via DMA interrupt.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21 08:47:26 +03:00
Linus Torvalds
d7b0827f28 Kbuild updates for v5.4
- add modpost warn exported symbols marked as 'static' because 'static'
    and EXPORT_SYMBOL is an odd combination
 
  - break the build early if gold linker is used
 
  - optimize the Bison rule to produce .c and .h files by a single
    pattern rule
 
  - handle PREEMPT_RT in the module vermagic and UTS_VERSION
 
  - warn CONFIG options leaked to the user-space except existing ones
 
  - make single targets work properly
 
  - rebuild modules when module linker scripts are updated
 
  - split the module final link stage into scripts/Makefile.modfinal
 
  - fix the missed error code in merge_config.sh
 
  - improve the error message displayed on the attempt of the O= build
    in unclean source tree
 
  - remove 'clean-dirs' syntax
 
  - disable -Wimplicit-fallthrough warning for Clang
 
  - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
 
  - remove ARCH_{CPP,A,C}FLAGS variables
 
  - add $(BASH) to run bash scripts
 
  - change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
    instead of the basename
 
  - stop suppressing Clang's -Wunused-function warnings when W=1
 
  - fix linux/export.h to avoid genksyms calculating CRC of trimmed
    exported symbols
 
  - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl1+OnoeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGoKEQAKcid9lDacMe5KWT
 4Ic93hANMFKZ9Qy8WoxivnOr1a93NcloZ0Bhka96QUt7hYUkLmDCs99eMbxKuMfP
 m/ViHepojOBPzq+VtAGWOiIyPMCA7XDrTPph4wcPDKeOURTreK1PZ20fxDoAR4to
 +qaqKZJGdRcNf2DpJN1yIosz8Wj0Sa2LQrRi9jgUHi3bzgvLfL7P9WM2xyZMggAc
 GaSktCEFL0UzMFlMpYyDrKh2EV6ryOnN8+bVAKbmWP89tuU3njutycKdWOoL+bsj
 tH2kjFThxQyIcZGNHS1VzNunYAFE2q5nj2q47O1EDN6sjTYUoRn5cHwPam6x3Kly
 NH88xDEtJ7sUUc9GZEIXADWWD0f08QIhAH5x+jxFg3529lNgyrNHRSQ2XceYNAnG
 i/GnMJ0EhODOFKusXw7sNlWFKtukep+8/pwnvfTXWQu6plEm5EQ3a3RL5SESubVo
 mHzXsQDFCE0x/UrsJxEAww+3YO3pQEelfVi74W9z0cckpbRF8FuUq/69ltOT15l4
 X+gCz80lXMWBKw/kNoR4GQoAJo3KboMEociawwoj72HXEHTPLJnCdUOsAf3n+opj
 xuz/UPZ4WYSgKdnbmmDbJ+1POA1NqtARZZXpMVyKVVCOiLafbJkLQYwLKEpE2mOO
 TP9igzP1i3/jPWec8cJ6Fa8UwuGh
 =VGqV
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - add modpost warn exported symbols marked as 'static' because 'static'
   and EXPORT_SYMBOL is an odd combination

 - break the build early if gold linker is used

 - optimize the Bison rule to produce .c and .h files by a single
   pattern rule

 - handle PREEMPT_RT in the module vermagic and UTS_VERSION

 - warn CONFIG options leaked to the user-space except existing ones

 - make single targets work properly

 - rebuild modules when module linker scripts are updated

 - split the module final link stage into scripts/Makefile.modfinal

 - fix the missed error code in merge_config.sh

 - improve the error message displayed on the attempt of the O= build in
   unclean source tree

 - remove 'clean-dirs' syntax

 - disable -Wimplicit-fallthrough warning for Clang

 - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC

 - remove ARCH_{CPP,A,C}FLAGS variables

 - add $(BASH) to run bash scripts

 - change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
   instead of the basename

 - stop suppressing Clang's -Wunused-function warnings when W=1

 - fix linux/export.h to avoid genksyms calculating CRC of trimmed
   exported symbols

 - misc cleanups

* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
  genksyms: convert to SPDX License Identifier for lex.l and parse.y
  modpost: use __section in the output to *.mod.c
  modpost: use MODULE_INFO() for __module_depends
  export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
  export.h: remove defined(__KERNEL__), which is no longer needed
  kbuild: allow Clang to find unused static inline functions for W=1 build
  kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
  kbuild: refactor scripts/Makefile.extrawarn
  merge_config.sh: ignore unwanted grep errors
  kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
  modpost: add NOFAIL to strndup
  modpost: add guid_t type definition
  kbuild: add $(BASH) to run scripts with bash-extension
  kbuild: remove ARCH_{CPP,A,C}FLAGS
  kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
  kbuild: Do not enable -Wimplicit-fallthrough for clang for now
  kbuild: clean up subdir-ymn calculation in Makefile.clean
  kbuild: remove unneeded '+' marker from cmd_clean
  kbuild: remove clean-dirs syntax
  kbuild: check clean srctree even earlier
  ...
2019-09-20 08:36:47 -07:00
Murilo Fossa Vicentini
dd0f9d896d ibmvnic: Warn unknown speed message only when carrier is present
With commit 0655f9943d ("net/ibmvnic: Update carrier state after link
state change") we are now able to detect when the carrier is properly
present in the device, so only report an unexpected unknown speed when it
is properly detected. Unknown speed is expected to be seen by the device
in case the backing device has no link detected.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Murilo Fossa Vicentini <muvic@linux.ibm.com>
Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
2019-09-19 17:36:49 -07:00
Nathan Chancellor
b47bea2b5c ionic: Remove unnecessary ternary operator in ionic_debugfs_add_ident
clang warns:

../drivers/net/ethernet/pensando/ionic/ionic_debugfs.c:60:37: warning:
expression result unused [-Wunused-value]
                            ionic, &identity_fops) ? 0 : -EOPNOTSUPP;
                                                         ^~~~~~~~~~~
1 warning generated.

The return value of debugfs_create_file does not need to be checked [1]
and the function returns void so get rid of the ternary operator, it is
unnecessary.

[1]: https://lore.kernel.org/linux-mm/20150815160730.GB25186@kroah.com/

Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Link: https://github.com/ClangBuiltLinux/linux/issues/658
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-19 16:56:50 -07:00
Johannes Berg
2d88b2cf2f iwlwifi: mvm: fix build w/o CONFIG_THERMAL
Without CONFIG_THERMAL, the driver fails to link as it calls
iwl_mvm_send_temp_report_ths_cmd() unconditionally. Fix this
by making that function available, but do almost nothing but
send the empty firmware command to enable CT-kill reporting.

While at it, also fix that function itself to not error out
when the thermal zone hasn't been initialized, but instead
just send the empty firmware command in this case as well.

Fixes: 242d9c8b9a ("iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-19 21:58:12 +03:00
Johan Hovold
7fd25e6fc0 ieee802154: atusb: fix use-after-free at disconnect
The disconnect callback was accessing the hardware-descriptor private
data after having having freed it.

Fixes: 7490b008d1 ("ieee802154: add support for atusb transceiver")
Cc: stable <stable@vger.kernel.org>     # 4.2
Cc: Alexander Aring <alex.aring@gmail.com>
Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-09-19 16:17:57 +02:00
Oliver Neukum
280ceaed79 usbnet: sanity checking of packet sizes and device mtu
After a reset packet sizes and device mtu can change and need
to be reevaluated to calculate queue sizes.
Malicious devices can set this to zero and we divide by it.
Introduce sanity checking.

Reported-and-tested-by:  syzbot+6102c120be558c885f04@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-19 13:27:11 +02:00
Linus Torvalds
81160dda9a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.

 2) Use bio_vec in the networking instead of custom skb_frag_t, from
    Matthew Wilcox.

 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.

 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.

 5) Support all variants of 5750X bnxt_en chips, from Michael Chan.

 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
    Buslov.

 7) Add TCP syn cookies bpf helper, from Petar Penkov.

 8) Add 'nettest' to selftests and use it, from David Ahern.

 9) Add extack support to drop_monitor, add packet alert mode and
    support for HW drops, from Ido Schimmel.

10) Add VLAN offload to stmmac, from Jose Abreu.

11) Lots of devm_platform_ioremap_resource() conversions, from
    YueHaibing.

12) Add IONIC driver, from Shannon Nelson.

13) Several kTLS cleanups, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
  mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
  mlxsw: spectrum: Register CPU port with devlink
  mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
  net: ena: fix incorrect update of intr_delay_resolution
  net: ena: fix retrieval of nonadaptive interrupt moderation intervals
  net: ena: fix update of interrupt moderation register
  net: ena: remove all old adaptive rx interrupt moderation code from ena_com
  net: ena: remove ena_restore_ethtool_params() and relevant fields
  net: ena: remove old adaptive interrupt moderation code from ena_netdev
  net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
  net: ena: enable the interrupt_moderation in driver_supported_features
  net: ena: reimplement set/get_coalesce()
  net: ena: switch to dim algorithm for rx adaptive interrupt moderation
  net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
  net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
  ethtool: implement Energy Detect Powerdown support via phy-tunable
  xen-netfront: do not assume sk_buff_head list is empty in error handling
  s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
  net: ena: don't wake up tx queue when down
  drop_monitor: Better sanitize notified packets
  ...
2019-09-18 12:34:53 -07:00
Linus Torvalds
4feaab05dc LED updates for 5.4-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
 2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
 UPF66k76oOODV7cyndjXnTnRXbeCRAM=
 =Szby
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "In this cycle we've finally managed to contribute the patch set
  sorting out LED naming issues. Besides that there are many changes
  scattered among various LED class drivers and triggers.

  LED naming related improvements:

   - add new 'function' and 'color' fwnode properties and deprecate
     'label' property which has been frequently abused for conveying
     vendor specific names that have been available in sysfs anyway

   - introduce a set of standard LED_FUNCTION* definitions

   - introduce a set of standard LED_COLOR_ID* definitions

   - add a new {devm_}led_classdev_register_ext() API with the
     capability of automatic LED name composition basing on the
     properties available in the passed fwnode; the function is
     backwards compatible in a sense that it uses 'label' data, if
     present in the fwnode, for creating LED name

   - add tools/leds/get_led_device_info.sh script for retrieving LED
     vendor, product and bus names, if applicable; it also performs
     basic validation of an LED name

   - update following drivers and their DT bindings to use the new LED
     registration API:

        - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
          leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt

  Other LED class improvements:

   - replace {devm_}led_classdev_register() macros with inlines

   - allow to call led_classdev_unregister() unconditionally

   - switch to use fwnode instead of be stuck with OF one

  LED triggers improvements:

   - led-triggers:
        - fix dereferencing of null pointer
        - fix a memory leak bug

   - ledtrig-gpio:
        - GPIO 0 is valid

  Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
  more complete driver exists, based on a generic driver for the AMD
  SOCs gpio-controller, supporting LEDs as well other devices:

   - drop profile field from priv data

   - drop iosize field from priv data

   - drop enum_apu_led_platform_types

   - drop superseeded apu2/3 led support

   - add pr_fmt prefix for better log output

   - fix error message on probing failure

  Other misc fixes and improvements to existing LED class drivers:

   - leds-ns2, leds-max77650:
        - add of_node_put() before return

   - leds-pwm, leds-is31fl32xx:
        - use struct_size() helper

   - leds-lm3697, leds-lm36274, leds-lm3532:
        - switch to use fwnode_property_count_uXX()

   - leds-lm3532:
        - fix brightness control for i2c mode
        - change the define for the fs current register
        - fixes for the driver for stability
        - add full scale current configuration
        - dt: Add property for full scale current.
        - avoid potentially unpaired regulator calls
        - move static keyword to the front of declarations
        - fix optional led-max-microamp prop error handling

   - leds-max77650:
        - add of_node_put() before return
        - add MODULE_ALIAS()
        - Switch to fwnode property API

   - leds-as3645a:
        - fix misuse of strlcpy

   - leds-netxbig:
        - add of_node_put() in netxbig_leds_get_of_pdata()
        - remove legacy board-file support

   - leds-is31fl319x:
        - simplify getting the adapter of a client

   - leds-ti-lmu-common:
        - fix coccinelle issue
        - move static keyword to the front of declaration

   - leds-syscon:
        - use resource managed variant of device register

   - leds-ktd2692:
        - fix a typo in the name of a constant

   - leds-lp5562:
        - allow firmware files up to the maximum length

   - leds-an30259a:
        - fix typo

   - leds-pca953x:
        - include the right header"

* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
  leds: lm3532: Fix optional led-max-microamp prop error handling
  led: triggers: Fix dereferencing of null pointer
  leds: ti-lmu-common: Move static keyword to the front of declaration
  leds: lm3532: Move static keyword to the front of declarations
  leds: trigger: gpio: GPIO 0 is valid
  leds: pwm: Use struct_size() helper
  leds: is31fl32xx: Use struct_size() helper
  leds: ti-lmu-common: Fix coccinelle issue in TI LMU
  leds: lm3532: Avoid potentially unpaired regulator calls
  leds: syscon: Use resource managed variant of device register
  leds: Replace {devm_}led_classdev_register() macros with inlines
  leds: Allow to call led_classdev_unregister() unconditionally
  leds: lm3532: Add full scale current configuration
  dt: lm3532: Add property for full scale current.
  leds: lm3532: Fixes for the driver for stability
  leds: lm3532: Change the define for the fs current register
  leds: lm3532: Fix brightness control for i2c mode
  leds: Switch to use fwnode instead of be stuck with OF one
  leds: max77650: Switch to fwnode property API
  led: triggers: Fix a memory leak bug
  ...
2019-09-17 18:40:42 -07:00
David S. Miller
1bab8d4c48 Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net
Pull in bug fixes from 'net' tree for the merge window.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-17 23:51:10 +02:00
Linus Torvalds
399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Linus Torvalds
2b97c39514 ARM: SoC platform updates for v5.4
The main change this time around is a cleanup of some of the oldest
 platforms based on the XScale and ARM9 CPU cores, which are between 10
 and 20 years old.
 
 The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
 IOP33x/IOP13xx platforms are removed after we determined that nobody is
 using them any more.
 
 The TI Davinci and NXP LPC32xx platforms on the other hand are still in
 active use and are converted to the ARCH_MULTIPLATFORM build, meaning
 that we can compile a kernel that works on these along with most other
 ARMv5 platforms. Changes toward that goal are also merged for IOP32x,
 but additional work is needed to complete this. Patches for the
 remaining ARMv5 platforms have started but need more work and some
 testing.
 
 Support for the new ASpeed AST2600 gets added, this is based on the
 Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
 ARMv6 chips in the same family.
 
 Other changes include a cleanup of the ST-Ericsson ux500 platform
 and the move of the TI Davinci platform to a new clocksource driver.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6RZAAoJEJpsee/mABjZDO0QAKGkhoEdUmrar0Yf7/ibTrLK
 0naWvQtPEm6dv+u1zNfe2IWchVRbBVm+YSLbyaAZwJQknV5gdxgd/UyQrSG9yywg
 xDEUdnj03AksYreWbr1tfcA6kQQJEeqZeysNej0v7MAd6MFz5O4M4CgYfAnCLCc4
 5rzSqbtFgv4uNMnMTJGKk8anFWNYLbewoBGVcGIEQ/KQlf1+NrlqBWk7CgvencaF
 VLqpK0mllhKxAOJHGz6Q/XXiJnj0u56X9GvfcJoaxDWVrAnC6ii29NOHKeXhxS5W
 /EmhIEuqCRoGLAMYmml+NbCv43Z1L7neDJwg6sf9cVqNrB9L1Ldlgpr/uoj++Z+l
 wdZ297Ogs4mKYx5CCdK4X1TaFOH3s+/awFr1uEP70p+QsPDMrCTuLSjgeQziylgO
 kBGIGkqG4l48V9psQy/9SaalgGSB8w6Ta/ms1+rWc99Qj3ExDFCAMIl4uzOxjxT1
 9MZbvhc3ulLT4BBXNGhvNaPJxYGk+ggV/ObsqF9+GkxLcVPR8L1tPIzZMB5dB1YR
 0YcwyK2jlZGKIwMjLYDT+axGGPh9G+LV6INjRbW5BGJHgNZF844Bxw/eFYushLAu
 KHrbpm3ImzJw9eHlgIRtFRTy8ZKPuvv7fGg3zzKSHT4ZmC3tEM68PnQGuMEvVX8Q
 +Oa6OiDb0pkV1zsACSZn
 =u+ew
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "The main change this time around is a cleanup of some of the oldest
  platforms based on the XScale and ARM9 CPU cores, which are between 10
  and 20 years old.

  The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
  IOP33x/IOP13xx platforms are removed after we determined that nobody
  is using them any more.

  The TI Davinci and NXP LPC32xx platforms on the other hand are still
  in active use and are converted to the ARCH_MULTIPLATFORM build,
  meaning that we can compile a kernel that works on these along with
  most other ARMv5 platforms. Changes toward that goal are also merged
  for IOP32x, but additional work is needed to complete this. Patches
  for the remaining ARMv5 platforms have started but need more work and
  some testing.

  Support for the new ASpeed AST2600 gets added, this is based on the
  Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
  ARMv6 chips in the same family.

  Other changes include a cleanup of the ST-Ericsson ux500 platform and
  the move of the TI Davinci platform to a new clocksource driver"

[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
  buildable on other platforms through COMPILE_TEST, but that causes new
  warnings that I most definitely do not want to see during the merge
  window as that could hide other issues.

  So the COMPILE_TEST option got disabled for them again   - Linus ]

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
  ARM: davinci: support multiplatform build for ARM v5
  arm64: exynos: Enable exynos-chipid driver
  ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  ARM: davinci: dm646x: Fix a typo in the comment
  ARM: davinci: dm646x: switch to using the clocksource driver
  ARM: davinci: dm644x: switch to using the clocksource driver
  ARM: aspeed: Enable SMP boot
  ARM: aspeed: Add ASPEED AST2600 architecture
  ARM: aspeed: Select timer in each SoC
  dt-bindings: arm: cpus: Add ASPEED SMP
  ARM: imx: stop adjusting ar8031 phy tx delay
  mailmap: map old company name to new one @microchip.com
  MAINTAINERS: at91: remove the TC entry
  MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
  ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
  MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
  ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
  ARM: debug-ll: Add support for r7s9210
  ...
2019-09-16 15:48:14 -07:00
Shalom Toledo
a759ab6dac mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
While debugging packet loss towards the CPU, it is useful to be able to
query the CPU port's shared buffer quotas and occupancy.

Since the CPU port has no ingress buffers, all the shared buffers ingress
information will be cleared.

Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:07:59 +02:00
Shalom Toledo
28b1987ef5 mlxsw: spectrum: Register CPU port with devlink
Register CPU port with devlink.

Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:07:59 +02:00
Shalom Toledo
9d0aa053ea mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
Next patch is going to register the CPU port with devlink, but only so
that the CPU port's shared buffer configuration and occupancy could be
queried.

Prevent changing CPU port's shared buffer threshold and binding
configuration.

Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:07:59 +02:00
Arthur Kiyanovski
79226cea4a net: ena: fix incorrect update of intr_delay_resolution
ena_dev->intr_moder_rx/tx_interval save the intervals received from the
user after dividing them by ena_dev->intr_delay_resolution. Therefore
when intr_delay_resolution changes, the code needs to first mutiply
intr_moder_rx/tx_interval by the previous intr_delay_resolution to get
the value originally given by the user, and only then divide it by the
new intr_delay_resolution.

Current code does not first multiply intr_moder_rx/tx_interval by the old
intr_delay_resolution. This commit fixes it.

Also initialize ena_dev->intr_delay_resolution to be 1.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:03 +02:00
Arthur Kiyanovski
0eda847953 net: ena: fix retrieval of nonadaptive interrupt moderation intervals
Nonadaptive interrupt moderation intervals are assigned the value set
by the user in ethtool -C divided by ena_dev->intr_delay_resolution.

Therefore when the user tries to get the nonadaptive interrupt moderation
intervals with ethtool -c the code needs to multiply the saved value
by ena_dev->intr_delay_resolution.

The current code erroneously divides instead of multiplying in ethtool -c.
This patch fixes this.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
7b8a28787e net: ena: fix update of interrupt moderation register
Current implementation always updates the interrupt register with
the smoothed_interval of the rx_ring. However this should be
done only in case of adaptive interrupt moderation. If non-adaptive
interrupt moderation is used, the non-adaptive interrupt moderation
interval should be used. This commit fixes that.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
3ced8cbdf7 net: ena: remove all old adaptive rx interrupt moderation code from ena_com
Remove previous implementation of adaptive rx interrupt moderation
from ena_com files.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
64d1fb9dfc net: ena: remove ena_restore_ethtool_params() and relevant fields
Deleted unused 4 fields from struct ena_adapter and their only user
ena_restore_ethtool_params().

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
242d81fd3d net: ena: remove old adaptive interrupt moderation code from ena_netdev
1. Out of the fields {per_napi_bytes, per_napi_packets} in struct ena_ring,
   only rx_ring->per_napi_packets are used to determine if napi did work
   for dim.
   This commit removes all other uses of these fields.
2. Remove ena_ring->moder_tbl_idx, which is not used by dim.
3. Remove all calls to ena_com_destroy_interrupt_moderation(), since all it
   did was to destroy the interrupt moderation table, which is removed as
   part of removing old interrupt moderation code.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
57e3a5f24b net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
Remove code duplication in:
ena_com_update_nonadaptive_moderation_interval_tx()
ena_com_update_nonadaptive_moderation_interval_rx()
functions.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
bd21b0cc3a net: ena: enable the interrupt_moderation in driver_supported_features
Add driver_supported_features to host_host info which is a new API used to
communicate to the device which features are supported by the driver.

Add the interrupt_moderation bit to host_info->driver_supported_features
and enable it to signal the device that this driver supports interrupt
moderation properly.

Reserved bits are for features implemented in the future

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
b3db86dc4b net: ena: reimplement set/get_coalesce()
1. Remove old adaptive interrupt moderation code from set/get_coalesce()
2. Add ena_update_rx_rings_intr_moderation() function for updating
   nonadaptive interrupt moderation intervals similarly to
   ena_update_tx_rings_intr_moderation().
3. Remove checks of multiple unsupported received interrupt coalescing
   parameters. This makes code cleaner and cancels the need to update
   it every time a new coalescing parameter is invented.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
282faf61a0 net: ena: switch to dim algorithm for rx adaptive interrupt moderation
Use the dim library for the rx adaptive interrupt moderation implementation

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Arthur Kiyanovski
15619e722b net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
Add intr_moder_rx_interval to struct ena_com_dev and use it as the
location where the interrupt moderation rx interval is saved, instead
of the interrupt moderation table.

This is done as a first step before removing the old interrupt moderation
code.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:06:02 +02:00
Alexandru Ardelean
65d7be094f net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD`
phy-tunable feature.
EDPD is also enabled by default on PHY config_init, but can be disabled via
the phy-tunable control.

When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX
periodic pulses, so that in case the other PHY is also on EDPD mode, there
is no lock-up situation where both sides are waiting for the other to
transmit.

Via the phy-tunable control, TX pulses can be disabled if specifying 0
`tx-interval` via ethtool.

The ADIN PHY supports only fixed 1 second intervals; they cannot be
configured. That is why the acceptable values are 1,
ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables
TX pulses).

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 22:02:45 +02:00
Dongli Zhang
00b368502d xen-netfront: do not assume sk_buff_head list is empty in error handling
When skb_shinfo(skb) is not able to cache extra fragment (that is,
skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes
the sk_buff_head list is already empty. As a result, cons is increased only
by 1 and returns to error handling path in xennet_poll().

However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be
set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring
buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are
already cleared to NULL. This leads to NULL pointer access in the next
iteration to process rx ring buffer entries.

Below is how xennet_poll() does error handling. All remaining entries in
tmpq are accounted to queue->rx.rsp_cons without assuming how many
outstanding skbs are remained in the list.

 985 static int xennet_poll(struct napi_struct *napi, int budget)
... ...
1032           if (unlikely(xennet_set_skb_gso(skb, gso))) {
1033                   __skb_queue_head(&tmpq, skb);
1034                   queue->rx.rsp_cons += skb_queue_len(&tmpq);
1035                   goto err;
1036           }

It is better to always have the error handling in the same way.

Fixes: ad4f15dc2c ("xen/netfront: don't bug in case of too many frags")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:46:22 +02:00
Sameeh Jubran
a53651ec93 net: ena: don't wake up tx queue when down
There is a race condition that can occur when calling ena_down().
The ena_clean_tx_irq() - which is a part of the napi handler -
function might wake up the tx queue when the queue is supposed
to be down (during recovery or changing the size of the queues
for example) This causes the ena_start_xmit() function to trigger
and possibly try to access the destroyed queues.

The race is illustrated below:

Flow A:                                       Flow B(napi handler)
ena_down()
   netif_carrier_off()
   netif_tx_disable()
                                                      ena_clean_tx_irq()
                                                         netif_tx_wake_queue()
   ena_napi_disable_all()
   ena_destroy_all_io_queues()

After these flows the tx queue is active and ena_start_xmit() accesses
the destroyed queue which leads to a kernel panic.

fixes: 1738cd3ed3 (net: ena: Add a driver for Amazon Elastic Network Adapters (ENA))

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:40:18 +02:00
Ido Schimmel
58a406def4 netdevsim: Set offsets to various protocol layers
The driver periodically generates "trapped" UDP packets that it then
passes on to devlink. Set the offsets to the various protocol layers.

This is a prerequisite to the next patch, where drop monitor is taught
to check that the offset to the MAC header was set.

Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:39:27 +02:00
Vladimir Oltean
317ab5b86c net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload
This qdisc offload is the closest thing to what the SJA1105 supports in
hardware for time-based egress shaping. The switch core really is built
around SAE AS6802/TTEthernet (a TTTech standard) but can be made to
operate similarly to IEEE 802.1Qbv with some constraints:

- The gate control list is a global list for all ports. There are 8
  execution threads that iterate through this global list in parallel.
  I don't know why 8, there are only 4 front-panel ports.

- Care must be taken by the user to make sure that two execution threads
  never get to execute a GCL entry simultaneously. I created a O(n^4)
  checker for this hardware limitation, prior to accepting a taprio
  offload configuration as valid.

- The spec says that if a GCL entry's interval is shorter than the frame
  length, you shouldn't send it (and end up in head-of-line blocking).
  Well, this switch does anyway.

- The switch has no concept of ADMIN and OPER configurations. Because
  it's so simple, the TAS settings are loaded through the static config
  tables interface, so there isn't even place for any discussion about
  'graceful switchover between ADMIN and OPER'. You just reset the
  switch and upload a new OPER config.

- The switch accepts multiple time sources for the gate events. Right
  now I am using the standalone clock source as opposed to PTP. So the
  base time parameter doesn't really do much. Support for the PTP clock
  source will be added in a future series.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:32:58 +02:00
Vladimir Oltean
5f06c63bd3 net: dsa: sja1105: Advertise the 8 TX queues
This is a preparation patch for the tc-taprio offload (and potentially
for other future offloads such as tc-mqprio).

Instead of looking directly at skb->priority during xmit, let's get the
netdev queue and the queue-to-traffic-class mapping, and put the
resulting traffic class into the dsa_8021q PCP field. The switch is
configured with a 1-to-1 PCP-to-ingress-queue-to-egress-queue mapping
(see vlan_pmap in sja1105_main.c), so the effect is that we can inject
into a front-panel's egress traffic class through VLAN tagging from
Linux, completely transparently.

Unfortunately the switch doesn't look at the VLAN PCP in the case of
management traffic to/from the CPU (link-local frames at
01-80-C2-xx-xx-xx or 01-1B-19-xx-xx-xx) so we can't alter the
transmission queue of this type of traffic on a frame-by-frame basis. It
is only selected through the "hostprio" setting which ATM is harcoded in
the driver to 7.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:32:57 +02:00
Vladimir Oltean
7f1e4ba814 net: dsa: sja1105: Add static config tables for scheduling
In order to support tc-taprio offload, the TTEthernet egress scheduling
core registers must be made visible through the static interface.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:32:57 +02:00
Vasundhara Volam
4037eb7156 bnxt_en: Add a new BNXT_FW_RESET_STATE_POLL_FW_DOWN state.
This new state is required when firmware indicates that the error
recovery process requires polling for firmware state to be completely
down before initiating reset.  For example, firmware may take some
time to collect the crash dump before it is down and ready to be
reset.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 16:44:27 +02:00
Michael Chan
72e0c9f912 bnxt_en: Update firmware interface spec. to 1.10.0.100.
Some error recovery updates to the spec., among other minor changes.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 16:44:27 +02:00
Vasundhara Volam
57a8730b1f bnxt_en: Increase timeout for HWRM_DBG_COREDUMP_XX commands
Firmware coredump messages take much longer than standard messages,
so increase the timeout accordingly.

Fixes: 6c5657d085 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 16:44:27 +02:00
Michael Chan
268d0895f1 bnxt_en: Don't proceed in .ndo_set_rx_mode() when device is not in open state.
Check the BNXT_STATE_OPEN flag instead of netif_running() in
bnxt_set_rx_mode().  If the driver is going through any reset, such
as firmware reset or even TX timeout, it may not be ready to set the RX
mode and may crash.  The new rx mode settings will be picked up when
the device is opened again later.

Fixes: 230d1f0de7 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 16:44:27 +02:00
Dmitry Torokhov
40ba6a12a5 net: mdio: switch to using gpiod_get_optional()
The MDIO device reset line is optional and now that gpiod_get_optional()
returns proper value when GPIO support is compiled out, there is no
reason to use fwnode_get_named_gpiod() that I plan to hide away.

Let's switch to using more standard gpiod_get_optional() and
gpiod_set_consumer_name() to keep the nice "PHY reset" label.

Also there is no reason to only try to fetch the reset GPIO when we have
OF node, gpiolib can fetch GPIO data from firmwares as well.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 16:25:16 +02:00
David S. Miller
28f2c362db Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-09-16

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Now that initial BPF backend for gcc has been merged upstream, enable
   BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to
   bpf_sysctl.file_pos, from Ilya.

2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions
   related to recent work on exposing BTF info through sysfs, from Andrii.

3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem
   headroom to be added twice, from Ciara.

4) Refactoring work to convert sock opt tests into test_progs framework
   in BPF kselftests, from Stanislav.

5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke.

6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 16:02:03 +02:00
Ciara Loftus
2e78fc620f ixgbe: fix xdp handle calculations
Commit 7cbbf9f1fa ("ixgbe: fix xdp handle calculations") reintroduced
the addition of the umem headroom to the xdp handle in the ixgbe_zca_free,
ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc functions. However,
the headroom is already added to the handle in the function
ixgbe_run_xdp_zc. This commit removes the latter addition and fixes the
case where the headroom is non-zero.

Fixes: 7cbbf9f1fa ("ixgbe: fix xdp handle calculations")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-16 09:35:09 +02:00
Ciara Loftus
168dfc3a77 i40e: fix xdp handle calculations
Commit 4c5d9a7fa1 ("i40e: fix xdp handle calculations") reintroduced
the addition of the umem headroom to the xdp handle in the i40e_zca_free,
i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc functions. However,
the headroom is already added to the handle in the function i40_run_xdp_zc.
This commit removes the latter addition and fixes the case where the
headroom is non-zero.

Fixes: 4c5d9a7fa1 ("i40e: fix xdp handle calculations")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-16 09:35:09 +02:00
Alexandru Ardelean
5f109d45a4 net: stmmac: socfpga: re-use the interface parameter from platform data
The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac`
struct and parses it on init.

The shared `stmmac_probe_config_dt()` function also parses this from the
device-tree and makes it available on the returned `plat_data` (which is
the same data available via `netdev_priv()`).

All that's needed now is to dig that information out, via some
`dev_get_drvdata()` && `netdev_priv()` calls and re-use it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 09:22:24 +02:00
Dan Carpenter
28c9eb9042 net/wan: dscc4: remove broken dscc4 driver
Using static analysis, I discovered that the "dpriv->pci_priv->pdev"
pointer is always NULL.  This pointer was supposed to be initialized
during probe and is essential for the driver to work.  It would be easy
to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has
been broken since before we started using git and no one has complained
so probably we should just remove it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 09:14:41 +02:00
Jose Abreu
19e13cb27b net: stmmac: Hold rtnl lock in suspend/resume callbacks
We need to hold rnl lock in suspend and resume callbacks because phylink
requires it. Otherwise we will get a WARN() in suspend and resume.

Also, move phylink start and stop callbacks to inside device's internal
lock so that we prevent concurrent HW accesses.

Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Reported-by: Christophe ROULLIER <christophe.roullier@st.com>
Tested-by: Christophe ROULLIER <christophe.roullier@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 09:11:09 +02:00
Colin Ian King
1f249677cf qed: fix spelling mistake "fullill" -> "fulfill"
There is a spelling mistake in a DP_VERBOSE debug message. Fix it.
(Using American English spelling as this is the most common way
to spell this in the kernel).

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 09:06:54 +02:00
Florian Fainelli
53568438e3 net: dsa: b53: Add support for port_egress_floods callback
Add support for configuring the per-port egress flooding control for
both Unicast and Multicast traffic.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 09:06:12 +02:00
David S. Miller
aa2eaa8c27 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor overlapping changes in the btusb and ixgbe drivers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 14:17:27 +02:00
Linus Torvalds
36024fcf8d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Don't corrupt xfrm_interface parms before validation, from Nicolas
    Dichtel.

 2) Revert use of usb-wakeup in btusb, from Mario Limonciello.

 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
    Leonardo Bras.

 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.

 5) Missing ULP check in sock_map, from John Fastabend.

 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.

 7) Fix length of SKB allocated in 6pack driver, from Christophe
    JAILLET.

 8) ip6_route_info_create() returns an error pointer, not NULL. From
    Maciej Żenczykowski.

 9) Only add RDS sock to the hashes after rs_transport is set, from
    Ka-Cheong Poon.

10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.

11) Presence of transmit IPSEC offload in an SKB is not tested for
    correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
    Kirsher.

12) Need rcu_barrier() when register_netdevice() takes one of the
    notifier based failure paths, from Subash Abhinov Kasiviswanathan.

13) Fix leak in sctp_do_bind(), from Mao Wenan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  cdc_ether: fix rndis support for Mediatek based smartphones
  sctp: destroy bucket if failed to bind addr
  sctp: remove redundant assignment when call sctp_get_port_local
  sctp: change return type of sctp_get_port_local
  ixgbevf: Fix secpath usage for IPsec Tx offload
  sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
  ixgbe: Fix secpath usage for IPsec TX offload.
  net: qrtr: fix memort leak in qrtr_tun_write_iter
  net: Fix null de-reference of device refcount
  ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
  tun: fix use-after-free when register netdev failed
  tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
  ixgbe: fix double clean of Tx descriptors with xdp
  ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
  mlx4: fix spelling mistake "veify" -> "verify"
  net: hns3: fix spelling mistake "undeflow" -> "underflow"
  net: lmc: fix spelling mistake "runnin" -> "running"
  NFC: st95hf: fix spelling mistake "receieve" -> "receive"
  net/rds: An rds_sock is added too early to the hash table
  mac80211: Do not send Layer 2 Update frame before authorization
  ...
2019-09-14 12:20:38 -07:00
David S. Miller
a3d3c74da4 wireless-drivers-next patches for 5.4
Last set of patches for 5.4. wil6210 and rtw88 being most active this
 time, but ath9k also having a new module to load devices without
 EEPROM.
 
 Major changes:
 
 wil6210
 
 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11
 
 * add debugfs file to show PCM ring content
 
 * report boottime_ns in scan results
 
 ath9k
 
 * add a separate loader for AR92XX (and older) pci(e) without eeprom
 
 brcmfmac
 
 * use the same wiphy after PCIe reset to not confuse the user space
 
 rtw88
 
 * enable interrupt migration
 
 * enable AMSDU in AMPDU aggregation
 
 * report RX power for each antenna
 
 * enable to DPK and IQK calibration methods to improve performance
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdfLwvAAoJEG4XJFUm622b8N8H/141YVGazqoNC/l0kaMbWZ//
 xbgdS8ujGyEFg86dfXs1DjYPsPG1v+UJwc42GQALcjVrdUacuO7ZEdBKF6q9q0gG
 7WsZrzmgMk2dJsZKSCYZHORbEJ/GE7yCgO1W1hS0iTRNXEV6/6u2s7bx4mPB3uhl
 voYLTLaDvA2n8+pxuJ/Dl0ewWFuGnWqnhgU5CV3f9MGLkB4BXmvMdA5iqhiqq3Bj
 RWfBZCslJj3snh4vsTzRNqnRRvtgTv3Nt/fVV8uH+K5wXBMutlc+MfVQw21kMb7c
 RConz/N87usC+pgY+va2UpyNqLis2rUhb0UH4/Sqc7uBmeCBSyE8JulkRLnce+c=
 =850h
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2019-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 5.4

Last set of patches for 5.4. wil6210 and rtw88 being most active this
time, but ath9k also having a new module to load devices without
EEPROM.

Major changes:

wil6210

* add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11

* add debugfs file to show PCM ring content

* report boottime_ns in scan results

ath9k

* add a separate loader for AR92XX (and older) pci(e) without eeprom

brcmfmac

* use the same wiphy after PCIe reset to not confuse the user space

rtw88

* enable interrupt migration

* enable AMSDU in AMPDU aggregation

* report RX power for each antenna

* enable to DPK and IQK calibration methods to improve performance
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-14 15:08:18 +02:00
Jiri Pirko
2670ac2625 net: devlink: move reload fail indication to devlink core and expose to user
Currently the fact that devlink reload failed is stored in drivers.
Move this flag into devlink core. Also, expose it to the user.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 22:11:14 +02:00
Jiri Pirko
97691069dc net: devlink: split reload op into two
In order to properly implement failure indication during reload,
split the reload op into two ops, one for down phase and one for
up phase.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 22:11:14 +02:00
Jiri Pirko
35c7ff349a mlx4: Split restart_one into two functions
Split the function restart_one into two functions and separate teardown
and buildup.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 22:11:14 +02:00
Bjørn Mork
4d7ffcf3bf cdc_ether: fix rndis support for Mediatek based smartphones
A Mediatek based smartphone owner reports problems with USB
tethering in Linux.  The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled.  The same applies to the two
types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:

0e8d:000a  Mediatek Crosscall Spider X5 3G Phone

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1

and

19d2:1023  ZTE K4201-z

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1

The Mediatek example is believed to apply to most smartphones with
Mediatek firmware.  The ZTE example is most likely also part of a larger
family of devices/firmwares.

Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 22:08:13 +02:00
Jason Gunthorpe
75c66515e4 Merge tag 'v5.3-rc8' into rdma.git for-next
To resolve dependencies in following patches

mlx5_ib.h conflict resolved by keeing both hunks

Linux 5.3-rc8

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13 16:59:51 -03:00
Kalle Valo
f9e5687545 Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git patches for 5.4. Major changes:

wil6210

* add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11

* add debugfs file to show PCM ring content

* report boottime_ns in scan results

ath9k

* add a separate loader for AR92XX (and older) pci(e) without eeprom,
  enabled with the new ATH9K_PCI_NO_EEPROM Kconfig option
2019-09-13 18:15:58 +03:00
Yan-Hsuan Chuang
98ab76ef6b rtw88: report RX power for each antenna
Report chains and chain_signal in ieee80211_rx_status.
It is useful for program such as tcpdump to see if the
antennas are well connected/placed.

8822C is able to receive CCK rates with 2 antennas, while
8822B can only use 1 antenna path to receive CCK rates.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:07:19 +03:00
Tsang-Shian Lin
e9afa2dc40 rtw88: fix wrong rx power calculation
Fix the wrong RF path for CCK rx power calculation.

Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:07:18 +03:00
Michael Straube
3a1f85798e rtlwifi: rtl8192de: replace _rtl92d_evm_db_to_percentage with generic version
Function _rtl92d_evm_db_to_percentage is functionally identical
to the generic version rtl_evm_db_to_percentage, so remove
_rtl92d_evm_db_to_percentage and use the generic version instead.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:06:48 +03:00
Michael Straube
622c19ed36 rtlwifi: rtl8192cu: replace _rtl92c_evm_db_to_percentage with generic version
Function _rtl92c_evm_db_to_percentage is functionally identical
to the generic version rtl_evm_db_to_percentage, so remove
_rtl92c_evm_db_to_percentage and use the generic version instead.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:06:47 +03:00
Michael Straube
1335ad27bd rtlwifi: rtl8192ce: replace _rtl92c_evm_db_to_percentage with generic version
Function _rtl92c_evm_db_to_percentage is functionally identical
to the generic version rtl_evm_db_to_percentage, so remove
_rtl92c_evm_db_to_percentage and use the generic version instead.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:06:46 +03:00
Yan-Hsuan Chuang
970cad9fb2 rtw88: allows to receive AMSDU in AMPDU
The hardware has enough buffer to receive like 8K for an MPDU.
So tell mac80211 that we can receive AMSDU in AMPDU.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:22 +03:00
Tzu-En Huang
479c4ee931 rtw88: add dynamic cck pd mechanism
This mechanism reduces the numbers of false alram in cck rate by
dynamically adjusting the value of power threshold and cs_ratio.
We determine the new value by three factors, which are rssi, false alarm
count and igi. Based on these factors, we define the current condition
into five levels. Compared to the previous level, if the level is changed,
we set the new values for power threshold and cs_ratio.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:21 +03:00
Yan-Hsuan Chuang
f27b886d0d rtw88: move IQK/DPK into phy_calibration
Since 8822c requires to do not only IQK, but also DPK.
Move these calibrations that need to be done once the channel
is determined, into phy_calibration.

And note that the order of the calibrations matters, 8822c
should do IQK first, then DPK.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:20 +03:00
Tzu-En Huang
5227c2ee45 rtw88: 8822c: add SW DPK support
Power amplifiers are not linear components, and require DPK to
reduce its nonlinearity. DPK is called Digital Pre-distortion
Calibration, can be used to compensate the output of power.

DPK tracking is in charge of tracking the thermal changes. And
it then shifts the power curve accordingly, which makes the
power output remains linear even if the PA works in different
temperature.

To perform DPK, the parameter table should also be updated.
And the table will be applied when device is powered on.
Then DPK will reference the values to calibrate.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:19 +03:00
Yan-Hsuan Chuang
1ac3294bf7 rtw88: 8822c: add FW IQK support
Add support for doing IQK in firmware

Ideally the RF component's I/Q vectors should be orthogonal,
but usually they are not. So we need to calibrate for the RF
components, ex. PA/LNA, ADC/DAC.

And if the I/Q vectors are more orthogonal, the mixed signal
will have less deviation. This helps with those rates with
higher modulation (MCS8-9), because they have more strict
EVM/SNR requirement. Also the better of the quality of the
signal, the longer it can propagate, and the better throughput
performance we can get.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:18 +03:00
Tsang-Shian Lin
bc61ae9643 rtw88: 8822c: Enable interrupt migration
Enable 8822C Tx/Rx interrupt migration.
In some platforms, performance test may cause heavy cpu loading and get
bad results. Interrupt migration can decrease the amount of interrupts,
and lower cpu loading.

Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:17 +03:00
Chin-Yen Lee
dfcd0f5886 rtw88: 8822c: update pwr_seq to v13
update sequence to v13 to reduce power consumption
when MAC power off

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:16 +03:00
Yan-Hsuan Chuang
8908a9c17a rtw88: 8822c: update PHY parameter to v38
Update PHY hardware parameters to v38.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 18:03:15 +03:00
Larry Finger
e6e5ec3042 rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some unused bit manipulation macros
Each of these drivers defines some device to host macros that are never
used, thus they can be removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:40 +03:00
Larry Finger
fca13fd03d rtlwifi: rtl8723be: Convert inline routines to little-endian words
In this step, the read/write routines for the descriptors are converted
to use __le32 quantities, thus a lot of casts can be removed. Callback
routines still use the 8-bit arrays, but these are changed within the
specified routine.

The macro that cleared a descriptor has now been converted into an inline
routine.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:39 +03:00
Larry Finger
d7b259fe69 rtlwifi: rtl8723be: Convert macros that set descriptor
As a first step in the conversion, the macros that set the RX and TX
descriptors are converted to static inline routines, and the names are
changed from upper to lower case. To minimize the changes in a given
step, the input descriptor information is left as as a byte array
(u8 *), even though it should be a little-endian word array (__le32 *).
That will be changed in the next patch.

Several places where checkpatch.pl complains about a space after a cast
are fixed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:38 +03:00
Larry Finger
360226fdc5 rtlwifi: rtl8723be: Replace local bit manipulation macros
This driver uses a set of local macros to manipulate the RX and TX
descriptors, which are all little-endian quantities. These macros
are replaced by the bitfield macros le32p_replace_bits() and
le32_get_bits(). In several places, the macros operated on an entire
32-bit word. In these cases, a direct read or replacement is used.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:37 +03:00
Larry Finger
64578a3d34 rtlwifi: rtl8723be: Remove unused SET_XXX and GET_XXX macros
iAs the first step in converting from macros that get/set information
in the RX and TX descriptors, unused macros are being removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:36 +03:00
Larry Finger
773755d911 rtlwifi: rtl8723ae: Convert inline routines to little-endian words
In this step, the read/write routines for the descriptors are converted
to use __le32 quantities, thus a lot of casts can be removed. Callback
routines still use the 8-bit arrays, but these are changed within the
specified routine.

The macro that cleared a descriptor has now been converted into an inline
routine.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:35 +03:00
Larry Finger
a9db071f78 rtlwifi: rtl8723ae: Convert macros that set descriptor
As a first step in the conversion, the macros that set the RX and TX
descriptors are converted to static inline routines, and the names are
changed from upper to lower case. To minimize the changes in a given
step, the input descriptor information is left as as a byte array
(u8 *), even though it should be a little-endian word array (__le32 *).
That will be changed in the next patch.

Several places where checkpatch.pl reports lines too long are fixed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:34 +03:00
Larry Finger
05e2a0cb8c rtlwifi: rtl8723ae: Replace local bit manipulation macros
This driver uses a set of local macros to manipulate the RX and TX
descriptors, which are all little-endian quantities. These macros
are replaced by the bitfield macros le32p_replace_bits() and
le32_get_bits(). In several places, the macros operated on an entire
32-bit word. In these cases, a direct read or replacement is used.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:33 +03:00
Larry Finger
eb4b2d33c1 rtlwifi: rtl8723ae: Remove unused GET_XXX and SET_XXX macros
As the first step in converting from macros that get/set information
in the RX and TX descriptors, unused macros are being removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:55:32 +03:00
Lubomir Rintel
2199c98176 libertas: use mesh_wdev->ssid instead of priv->mesh_ssid
With the commit e86dc1ca46 ("Libertas: cfg80211 support") we've lost
the ability to actually set the Mesh SSID from userspace.
NL80211_CMD_SET_INTERFACE with NL80211_ATTR_MESH_ID sets the mesh point
interface's ssid field. Let's use that one for the Libertas Mesh
operation

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 17:23:47 +03:00
Jeff Kirsher
8f6617badc ixgbevf: Fix secpath usage for IPsec Tx offload
Port the same fix for ixgbe to ixgbevf.

The ixgbevf driver currently does IPsec Tx offloading
based on an existing secpath. However, the secpath
can also come from the Rx side, in this case it is
misinterpreted for Tx offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for Tx offload.

CC: Shannon Nelson <snelson@pensando.io>
Fixes: 7f68d43067 ("ixgbevf: enable VF IPsec offload operations")
Reported-by: Jonathan Tooker <jonathan@reliablehosting.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 15:52:10 +02:00
David S. Miller
6cd476d26b Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-09-12

This series contains updates to ice driver to implement and support
loading a Dynamic Device Personalization (DDP) package from lib/firmware
onto the device.

Paul updates the way the driver version is stored in the driver so that
we can pass the driver version to the firmware.  Passing of the driver
version to the firmware is needed for the DDP package to ensure we have
the appropriate support in the driver for the features in the package.

Lukasz fixes how the firmware version is stored to align with how the
firmware stores its own version.  Also extended the log message to
display additional useful information such as NVM version, API patch
information and firmware build hash.

Tony adds the needed driver support to check, load and store the DDP
package.  Also add support for the ability to load DDP packages intended
for specific hardware devices, as well as what to do when loading of the
DDP package fails to load.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 15:50:48 +02:00
David S. Miller
069841ef82 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2019-09-11

This series contains updates to i40e, ixgbe/vf and iavf.

Wenwen Wang fixes a potential memory leak where 3 allocated variables
are not properly cleaned up on failure for ixgbe.

Stefan Assmann fixes a potential kernel panic found when repeatedly
spawning and destroying VFs in i40e when a NULL pointer is dereferenced
due to a race condition.  Fixed up the i40e driver to clear the
__I40E_VIRTCHNL_OP_PENDING bit before returning after an invalid
minimum transmit rate is requested.  Updates the iavf driver to only
apply the MAC address change when the PF ACK's the requested change.

Tonghao Zhang updates ixgbe to use the skb_get_queue_mapping() API call
instead of the driver accessing the queue mapping directly.

Jake updates i40e to use ktime_get_real_ts64() instead of
ktime_to_timespec64().  Removes the define for bit 0x0001 for cloud
filters, since it is a reserved bit and not a valid type.  Also added
code comments to clearly state which bits are reserved and should not be
used or defined for cloud filter adminq command.  Clarify the macros
used to specify the cloud filter fields are individual bits, so use the
BIT() macro.

Aleksandr fixes up the print_link_message() to include the "negotiated"
FEC status for i40e.

Czeslaw also adds additional log message for devices without FEC in the
print_link_message() for i40e.

Colin Ian King reduces the object code size by making the array API
static constant.

Magnus fixes a potential receive buffer starvation issue for AF_XDP by
kicking the NAPI context of any queue with an attached AF_XDP zero-copy
socket.

v2: Removed patch 11 from the original series (Alex Duyck's ITR fix),
    so that it can be sent to the net tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13 15:46:38 +02:00
zhong jiang
3dfb22003f brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 16:45:17 +03:00
Colin Ian King
569ce0a486 rtlwifi: rtl8821ae: make array static const and remove redundant assignment
The array channel_all can be make static const rather than populating
it on the stack, this makes the code smaller.  Also, variable place
is being initialized with a value that is never read, so this assignment
is redundant and can be removed.

Before:
   text	   data	    bss	    dec	    hex	filename
 118537	   9591	      0	 128128	  1f480	realtek/rtlwifi/rtl8821ae/phy.o

After:
   text	   data	    bss	    dec	    hex	filename
 118331	   9687	      0	 128018	  1f412	realtek/rtlwifi/rtl8821ae/phy.o

Saves 110 bytes, (gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 16:44:18 +03:00
Rafał Miłecki
a1f5aac176 brcmfmac: don't realloc wiphy during PCIe reset
Providing a new wiphy on every PCIe reset was confusing and was causing
configuration problems for some users (supplicant and authenticators).
Sticking to the existing wiphy should make error recovery much simpler
and more reliable.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 16:42:34 +03:00
Rafał Miłecki
450914c39f brcmfmac: split brcmf_attach() and brcmf_detach() functions
Move code allocating/freeing wiphy out of above functions. This will
allow reinitializing the driver (e.g. on some error) without allocating
a new wiphy.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 16:42:33 +03:00
Rafał Miłecki
ba76ff25ee brcmfmac: move "cfg80211_ops" pointer to another struct
This moves "ops" pointer from "struct brcmf_cfg80211_info" to the
"struct brcmf_pub". This movement makes it possible to allocate wiphy
without attaching cfg80211 (brcmf_cfg80211_attach()). It's required for
later separation of wiphy allocation and driver initialization.

While at it fix also an unlikely memory leak in the brcmf_attach().

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 16:42:32 +03:00
Tony Nguyen
2de1256636 ice: Bump version
Bump version to 0.8.1-k

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12 11:39:25 -07:00
Tony Nguyen
462acf6aca ice: Enable DDP package download
Attempt to request an optional device-specific DDP package file
(one with the PCIe Device Serial Number in its name so that different DDP
package files can be used on different devices). If the optional package
file exists, download it to the device. If not, download the default
package file.

Log an appropriate message based on whether or not a DDP package
file exists and the return code from the attempt to download it to the
device.  If the download fails and there is not already a package file on
the device, go into "Safe Mode" where some features are not supported.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12 11:37:38 -07:00
Tony Nguyen
32d63fa1e9 ice: Initialize DDP package structures
Add functions to initialize, parse, and clean structures representing
the DDP package.

Upon completion of package download, read and store the DDP package
contents to these structures.  This configuration is used to
identify the default behavior and later used to update the HW table
entries.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12 11:28:40 -07:00
Tony Nguyen
c764881096 ice: Implement Dynamic Device Personalization (DDP) download
Add the required defines, structures, and functions to enable downloading
a DDP package.  Before download, checks are performed to ensure the package
is valid and compatible.

Note that package download is not yet requested by the driver as further
initialization is required to utilize the package.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12 11:19:16 -07:00
Lukasz Czapnik
870f805e97 ice: Fix FW version formatting in dmesg
The FW build id is currently being displayed as an int which doesn't make
sense. Instead display FW build id as a hex value. Also add other useful
information to the output such as NVM version, API patch info, and FW
build hash.

Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12 10:37:22 -07:00
Paul M Stillwell Jr
e3710a01a8 ice: send driver version to firmware
The driver is required to send a version to the firmware
to indicate that the driver is up. If the driver doesn't
do this the firmware doesn't behave properly.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12 10:22:04 -07:00
Lior David
50e107ff22 wil6210: ignore reset errors for FW during probe
There are special kinds of FW such as WMI only which
are used for testing, diagnostics and other specific
scenario.
Such FW is loaded during driver probe and the driver
disallows enabling any network interface, to avoid
operational issues.
In many cases it is used to debug early versions
of FW with new features, which sometimes fail
on startup.
Currently when such FW fails to load (for example,
because of init failure), the driver probe would fail
and shutdown the device making it difficult to debug
the early failure.
To fix this, ignore load failures in WMI only FW and
allow driver probe to succeed, making it possible to
continue and debug the FW load failure.

Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:07:56 +03:00
Lior David
055c8a71eb wil6210: fix RX short frame check
The short frame check in wil_sring_reap_rx_edma uses
skb->len which store the maximum frame length. Fix
this to use dmalen which is the actual length of
the received frame.

Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:07:45 +03:00
Lior David
0e698cd0b9 wil6210: use writel_relaxed in wil_debugfs_iomem_x32_set
writel_relaxed can be used in wil_debugfs_iomem_x32_set
since there is a wmb call immediately after.

Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:07:35 +03:00
Maya Erez
058b3f1124 wil6210: report boottime_ns in scan results
Call cfg80211_inform_bss_frame_data to report cfg80211 on the
boottime_ns in order to prevent the scan results filtering due to
aging.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:07:24 +03:00
Dedy Lansky
068f359aac wil6210: properly initialize discovery_expired_work
Upon driver rmmod, cancel_work_sync() can be invoked on
p2p.discovery_expired_work before this work struct was initialized.
This causes a WARN_ON with newer kernel version.

Add initialization of discovery_expired_work inside wil_vif_init().

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:07:14 +03:00
Alexei Avshalom Lazar
e78975fcda wil6210: verify cid value is valid
cid value is not being verified in wmi_evt_delba(),
verification is added.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:07:03 +03:00
Dedy Lansky
f4519fd937 wil6210: make sure DR bit is read before rest of the status message
Due to compiler optimization, it's possible that dr_bit (descriptor
ready) is read last from the status message.
Due to race condition between HW writing the status message and
driver reading it, other fields that were read earlier (before dr_bit)
could have invalid values.

Fix this by explicitly reading the dr_bit first and then using rmb
before reading the rest of the status message.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:06:53 +03:00
Ahmad Masri
42fe1e519e wil6210: fix PTK re-key race
Fix a race between cfg80211 add_key call and transmitting of 4/4 EAP
packet. In case the transmit is delayed until after the add key takes
place, message 4/4 will be encrypted with the new key, and the
receiver side (AP) will drop it due to MIC error.

Wil6210 will monitor and look for the transmitted packet 4/4 eap key.
In case add_key takes place before the transmission completed, then
wil6210 will let the FW store the key and wil6210 will notify the FW
to use the PTK key only after 4/4 eap packet transmission was
completed.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:06:42 +03:00
Dedy Lansky
977c45ab5f wil6210: add debugfs to show PMC ring content
PMC is a hardware debug mechanism which allows capturing real time
debug data and stream it to host memory. The driver allocates memory
buffers and set them inside PMC ring of descriptors.
Add pmcring debugfs that application can use to read the binary
content of descriptors inside the PMC ring (cat pmcring).

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:06:32 +03:00
Dedy Lansky
f99fe49ff3 wil6210: add wil_netif_rx() helper function
Move common part of wil_netif_rx_any into new helper function and add
support for non-gro receive using netif_rx_ni.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 18:06:22 +03:00
Rakesh Pillai
6be6c04bcc ath10k: fix channel info parsing for non tlv target
The tlv targets such as WCN3990 send more data in the chan info event, which is
not sent by the non tlv targets. There is a minimum size check in the wmi event
for non-tlv targets and hence we cannot update the common channel info
structure as it was done in commit 13104929d2 ("ath10k: fill the channel
survey results for WCN3990 correctly"). This broke channel survey results on
10.x firmware versions.

If the common channel info structure is updated, the size check for chan info
event for non-tlv targets will fail and return -EPROTO and we see the below
error messages

   ath10k_pci 0000:01:00.0: failed to parse chan info event: -71

Add tlv specific channel info structure and restore the original size of the
common channel info structure to mitigate this issue.

Tested HW: WCN3990
	   QCA9887
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
	   10.2.4-1.0-00037

Fixes: 13104929d2 ("ath10k: fill the channel survey results for WCN3990 correctly")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 17:54:38 +03:00
Nicolas Boichat
b713996083 ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet
When the FW bundles multiple packets, pkt->act_len may be incorrect
as it refers to the first packet only (however, the FW will only
bundle packets that fit into the same pkt->alloc_len).

Before this patch, the skb length would be set (incorrectly) to
pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually
adjusted in ath10k_sdio_mbox_rx_process_packet.

The first problem is that ath10k_sdio_mbox_rx_process_packet does not
use proper skb_put commands to adjust the length (it directly changes
skb->len), so we end up with a mismatch between skb->head + skb->tail
and skb->data + skb->len. This is quite serious, and causes corruptions
in the TCP stack, as the stack tries to coalesce packets, and relies
on skb->tail being correct (that is, skb_tail_pointer must point to
the first byte_after_ the data).

Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet,
this moves the code to ath10k_sdio_mbox_rx_packet, and also add a
bounds check, as skb_put would crash the kernel if not enough space is
available.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Fixes: 8530b4e7b2 ("ath10k: sdio: set skb len for all rx packets")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 17:53:02 +03:00
Ben Greear
b3281c6cb7 ath10k: free beacon buf later in vdev teardown
My wave-1 firmware often crashes when I am bringing down
AP vdevs, and sometimes at least some machines lockup hard
after spewing IOMMU errors.

I don't see the same issue in STA mode, so I suspect beacons
are the issue.

Moving the beacon buf deletion to later in the vdev teardown
logic appears to help this problem.  Firmware still crashes
often, but several iterations did not show IOMMU errors and
machine didn't hang.

Tested hardware: QCA9880
Tested firmware: ath10k-ct from beginning of 2019, exact version unknown

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12 17:48:08 +03:00
Arkadiusz Drabczyk
172ca8308b cxgb4: Fix spelling typos
Fix several spelling typos in comments in t4_hw.c.

Signed-off-by: Arkadiusz Drabczyk <arkadiusz@drabczyk.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 12:50:56 +01:00
Steffen Klassert
f39b683d35 ixgbe: Fix secpath usage for IPsec TX offload.
The ixgbe driver currently does IPsec TX offloading
based on an existing secpath. However, the secpath
can also come from the RX side, in this case it is
misinterpreted for TX offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for TX offload.

Fixes: 5925947047 ("ixgbe: process the Tx ipsec offload")
Reported-by: Michael Marley <michael@michaelmarley.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 12:43:14 +01:00
George McCollister
9b2d9f05cd net: dsa: microchip: add ksz9567 to ksz9477 driver
Add support for the KSZ9567 7-Port Gigabit Ethernet Switch to the
ksz9477 driver. The KSZ9567 supports both SPI and I2C. Oddly the
ksz9567 is already in the device tree binding documentation.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 11:36:12 +01:00
Tristram Ha
20e03777d7 net: dsa: microchip: add KSZ9477 I2C driver
Add KSZ9477 I2C driver support.  The code ksz9477.c and ksz_common.c are
used together to generate the I2C driver.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
[george.mccollister@gmail.com: bring up to date, use ksz_common regmap macros]
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 11:36:12 +01:00
Yang Yingliang
77f22f92df tun: fix use-after-free when register netdev failed
I got a UAF repport in tun driver when doing fuzzy test:

[  466.269490] ==================================================================
[  466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
[  466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
[  466.271810]
[  466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty 
[  466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  466.271838] Call Trace:
[  466.271858]  dump_stack+0xca/0x13e
[  466.271871]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271890]  print_address_description+0x79/0x440
[  466.271906]  ? vprintk_func+0x5e/0xf0
[  466.271920]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271935]  __kasan_report+0x15c/0x1df
[  466.271958]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271976]  kasan_report+0xe/0x20
[  466.271987]  tun_chr_read_iter+0x2ca/0x2d0
[  466.272013]  do_iter_readv_writev+0x4b7/0x740
[  466.272032]  ? default_llseek+0x2d0/0x2d0
[  466.272072]  do_iter_read+0x1c5/0x5e0
[  466.272110]  vfs_readv+0x108/0x180
[  466.299007]  ? compat_rw_copy_check_uvector+0x440/0x440
[  466.299020]  ? fsnotify+0x888/0xd50
[  466.299040]  ? __fsnotify_parent+0xd0/0x350
[  466.299064]  ? fsnotify_first_mark+0x1e0/0x1e0
[  466.304548]  ? vfs_write+0x264/0x510
[  466.304569]  ? ksys_write+0x101/0x210
[  466.304591]  ? do_preadv+0x116/0x1a0
[  466.304609]  do_preadv+0x116/0x1a0
[  466.309829]  do_syscall_64+0xc8/0x600
[  466.309849]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.309861] RIP: 0033:0x4560f9
[  466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[  466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
[  466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
[  466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
[  466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
[  466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
[  466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
[  466.323057]
[  466.323064] Allocated by task 2605:
[  466.335165]  save_stack+0x19/0x80
[  466.336240]  __kasan_kmalloc.constprop.8+0xa0/0xd0
[  466.337755]  kmem_cache_alloc+0xe8/0x320
[  466.339050]  getname_flags+0xca/0x560
[  466.340229]  user_path_at_empty+0x2c/0x50
[  466.341508]  vfs_statx+0xe6/0x190
[  466.342619]  __do_sys_newstat+0x81/0x100
[  466.343908]  do_syscall_64+0xc8/0x600
[  466.345303]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.347034]
[  466.347517] Freed by task 2605:
[  466.348471]  save_stack+0x19/0x80
[  466.349476]  __kasan_slab_free+0x12e/0x180
[  466.350726]  kmem_cache_free+0xc8/0x430
[  466.351874]  putname+0xe2/0x120
[  466.352921]  filename_lookup+0x257/0x3e0
[  466.354319]  vfs_statx+0xe6/0x190
[  466.355498]  __do_sys_newstat+0x81/0x100
[  466.356889]  do_syscall_64+0xc8/0x600
[  466.358037]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.359567]
[  466.360050] The buggy address belongs to the object at ffff888372139100
[  466.360050]  which belongs to the cache names_cache of size 4096
[  466.363735] The buggy address is located 336 bytes inside of
[  466.363735]  4096-byte region [ffff888372139100, ffff88837213a100)
[  466.367179] The buggy address belongs to the page:
[  466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
[  466.371582] flags: 0x2fffff80010200(slab|head)
[  466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
[  466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  466.377778] page dumped because: kasan: bad access detected
[  466.379730]
[  466.380288] Memory state around the buggy address:
[  466.381844]  ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.384009]  ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.388257]                                                  ^
[  466.390234]  ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.392512]  ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.394667] ==================================================================

tun_chr_read_iter() accessed the memory which freed by free_netdev()
called by tun_set_iff():

        CPUA                                           CPUB
  tun_set_iff()
    alloc_netdev_mqs()
    tun_attach()
                                                  tun_chr_read_iter()
                                                    tun_get()
                                                    tun_do_read()
                                                      tun_ring_recv()
    register_netdevice() <-- inject error
    goto err_detach
    tun_detach_all() <-- set RCV_SHUTDOWN
    free_netdev() <-- called from
                     err_free_dev path
      netdev_freemem() <-- free the memory
                        without check refcount
      (In this path, the refcount cannot prevent
       freeing the memory of dev, and the memory
       will be used by dev_put() called by
       tun_chr_read_iter() on CPUB.)
                                                     (Break from tun_ring_recv(),
                                                     because RCV_SHUTDOWN is set)
                                                   tun_put()
                                                     dev_put() <-- use the memory
                                                                   freed by netdev_freemem()

Put the publishing of tfile->tun after register_netdevice(),
so tun_get() won't get the tun pointer that freed by
err_detach path if register_netdevice() failed.

Fixes: eb0fb363f9 ("tuntap: attach queue 0 before registering netdevice")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 11:17:26 +01:00
Dirk van der Merwe
421bceb270 nfp: read chip model from the PluDevice register
The PluDevice register provides the authoritative chip model/revision.

Since the model number is purely used for reporting purposes, follow
the hardware team convention of subtracting 0x10 from the PluDevice
register to obtain the chip model/revision number.

Suggested-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-12 00:01:00 +01:00
Jose Abreu
ebecb860ed net: stmmac: pci: Add HAPS support using GMAC5
Add the support for Synopsys HAPS board that uses GMAC5.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 23:50:06 +01:00
Vitaly Gaiduk
507ddd5c0d net: phy: dp83867: Add SGMII mode type switching
This patch adds ability to switch beetween two PHY SGMII modes.
Some hardware, for example, FPGA IP designs may use 6-wire mode
which enables differential SGMII clock to MAC.

Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 23:37:35 +01:00
Ilya Maximets
bf280c0387 ixgbe: fix double clean of Tx descriptors with xdp
Tx code doesn't clear the descriptors' status after cleaning.
So, if the budget is larger than number of used elems in a ring, some
descriptors will be accounted twice and xsk_umem_complete_tx will move
prod_tail far beyond the prod_head breaking the completion queue ring.

Fix that by limiting the number of descriptors to clean by the number
of used descriptors in the Tx ring.

'ixgbe_clean_xdp_tx_irq()' function refactored to look more like
'ixgbe_xsk_clean_tx_ring()' since we're allowed to directly use
'next_to_clean' and 'next_to_use' indexes.

CC: stable@vger.kernel.org
Fixes: 8221c5eba8 ("ixgbe: add AF_XDP zero-copy Tx support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:42:18 -07:00
Alexander Duyck
377228accb ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
There were a couple cases where the ITR value generated via the adaptive
ITR scheme could exceed 126. This resulted in the value becoming either 0
or something less than 10. Switching back and forth between a value less
than 10 and a value greater than 10 can cause issues as certain hardware
features such as RSC to not function well when the ITR value has dropped
that low.

CC: stable@vger.kernel.org
Fixes: b4ded8327f ("ixgbe: Update adaptive ITR algorithm")
Reported-by: Gregg Leventhal <gleventhal@janestreet.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:39:35 -07:00
Magnus Karlsson
1f459bdc20 i40e: fix potential RX buffer starvation for AF_XDP
When the RX rings are created they are also populated with buffers
so that packets can be received. Usually these are kernel buffers,
but for AF_XDP in zero-copy mode, these are user-space buffers and
in this case the application might not have sent down any buffers
to the driver at this point. And if no buffers are allocated at ring
creation time, no packets can be received and no interrupts will be
generated so the NAPI poll function that allocates buffers to the
rings will never get executed.

To rectify this, we kick the NAPI context of any queue with an
attached AF_XDP zero-copy socket in two places in the code. Once
after an XDP program has loaded and once after the umem is registered.
This take care of both cases: XDP program gets loaded first then AF_XDP
socket is created, and the reverse, AF_XDP socket is created first,
then XDP program is loaded.

Fixes: 0a714186d3 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Colin Ian King
64d8db7dcf net/ixgbevf: make array api static const, makes object smaller
Don't populate the array API on the stack but instead make it
static const. Makes the object code smaller by 58 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  82969	   9763	    256	  92988	  16b3c	ixgbevf/ixgbevf_main.o

After:
   text	   data	    bss	    dec	    hex	filename
  82815	   9859	    256	  92930	  16b02	ixgbevf/ixgbevf_main.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Stefan Assmann
c5c922b3e0 iavf: fix MAC address setting for VFs when filter is rejected
Currently iavf unconditionally applies MAC address change requests. This
brings the VF in a state where it is no longer able to pass traffic if
the PF rejects a MAC filter change for the VF.
A typical scenario for a rejected MAC filter is for an untrusted VF to
request to change the MAC address when an administratively set MAC is
present.

To keep iavf working in this scenario the MAC filter handling in iavf
needs to act on the PF reply regarding the MAC filter change. In the
case of an ack the new MAC address gets set, whereas in the case of a
nack the previous MAC address needs to stay in place.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Stefan Assmann
8ad2e29829 i40e: clear __I40E_VIRTCHNL_OP_PENDING on invalid min Tx rate
In the case of an invalid min Tx rate being requested
i40e_ndo_set_vf_bw() immediately returns -EINVAL instead of releasing
__I40E_VIRTCHNL_OP_PENDING first.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Jacob Keller
846fcc7841 i40e: use BIT macro to specify the cloud filter field flags
The macros used to specify the cloud filter fields are intended to be
individual bits. Declare them using the BIT() macro to make their
intention a little more clear.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Czeslaw Zagorski
22afe2cf10 i40e: Fix message for other card without FEC.
When variable "req_fec, fec, an" are empty,
dmesg shows log with "Requested FEC: , Negotiated FEC: , Autoneg:".
Add link dmesg log for cards without FEC.

Signed-off-by: Czeslaw Zagorski <czeslawx.zagorski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Aleksandr Loktionov
3fc9d8e1d6 i40e: fix missed "Negotiated" string in i40e_print_link_message()
The "Negotiated" string in i40e_print_link_message() function was missed.
This string has been added to the dmesg and small refactoring done removing
common substrings and unifying link status message format.
Without this patch it was not clear that FEC is related to negotiated FEC.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Jacob Keller
3c734bbbb9 i40e: mark additional missing bits as reserved
Mark bits 0xD through 0xF for the command flags of a cloud filter as
reserved. These bits are not yet defined and are considered as reserved
in the data sheet.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Jacob Keller
eaa4950c22 i40e: remove I40E_AQC_ADD_CLOUD_FILTER_OIP
The bit 0x0001 used in the cloud filters adminq command is reserved, and
is not actually a valid type.

The Linux driver has never used this type, and it's not clear if any
driver ever has.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:46 -07:00
Jacob Keller
c4d8d90c1e i40e: use ktime_get_real_ts64 instead of ktime_to_timespec64
Remove a call to ktime_to_timespec64 by calling ktime_get_real_ts64
directly.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:45 -07:00
Tonghao Zhang
fb91a8bb73 ixgbe: use skb_get_queue_mapping in tx path
Use the common api, and don't access queue_mapping directly.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:45 -07:00
Stefan Assmann
a7542b8760 i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtask
While testing VF spawn/destroy the following panic occurred.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000029
[...]
Workqueue: i40e i40e_service_task [i40e]
RIP: 0010:i40e_sync_vsi_filters+0x6fd/0xc60 [i40e]
[...]
Call Trace:
 ? __switch_to_asm+0x35/0x70
 ? __switch_to_asm+0x41/0x70
 ? __switch_to_asm+0x35/0x70
 ? _cond_resched+0x15/0x30
 i40e_sync_filters_subtask+0x56/0x70 [i40e]
 i40e_service_task+0x382/0x11b0 [i40e]
 ? __switch_to_asm+0x41/0x70
 ? __switch_to_asm+0x41/0x70
 process_one_work+0x1a7/0x3b0
 worker_thread+0x30/0x390
 ? create_worker+0x1a0/0x1a0
 kthread+0x112/0x130
 ? kthread_bind+0x30/0x30
 ret_from_fork+0x35/0x40

Investigation revealed a race where pf->vf[vsi->vf_id].trusted may get
accessed by the watchdog via i40e_sync_filters_subtask() although
i40e_free_vfs() already free'd pf->vf.
To avoid this the call to i40e_sync_vsi_filters() in
i40e_sync_filters_subtask() needs to be guarded by __I40E_VF_DISABLE,
which is also used by i40e_free_vfs().

Note: put the __I40E_VF_DISABLE check after the
__I40E_MACVLAN_SYNC_PENDING check as the latter is more likely to
trigger.

CC: stable@vger.kernel.org
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:45 -07:00
Wenwen Wang
22d11eacc3 ixgbe: fix memory leaks
In ixgbe_configure_clsu32(), 'jump', 'input', and 'mask' are allocated
through kzalloc() respectively in a for loop body. Then,
ixgbe_clsu32_build_input() is invoked to build the input. If this process
fails, next iteration of the for loop will be executed. However, the
allocated 'jump', 'input', and 'mask' are not deallocated on this execution
path, leading to memory leaks.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11 09:10:45 -07:00
Alexandru Ardelean
0060c87833 net: stmmac: implement support for passive mode converters via dt
In-between the MAC & PHY there can be a mode converter, which converts one
mode to another (e.g. GMII-to-RGMII).

The converter, can be passive (i.e. no driver or OS/SW information
required), so the MAC & PHY need to be configured differently.

For the `stmmac` driver, this is implemented via a `mac-mode` property in
the device-tree, which configures the MAC into a certain mode, and for the
PHY a `phy_interface` field will hold the mode of the PHY. The mode of the
PHY will be passed to the PHY and from there-on it work in a different
mode. If unspecified, the default `phy-mode` will be used for both.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:27:09 +01:00
Colin Ian King
f4b752a6b2 mlx4: fix spelling mistake "veify" -> "verify"
There is a spelling mistake in a mlx4_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:20:04 +01:00
Colin Ian King
c3dc1fa722 net: hns3: fix spelling mistake "undeflow" -> "underflow"
There is a spelling mistake in a .msg literal string. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:17:00 +01:00
Sudarsana Reddy Kalluru
2da244a5c4 qed: Fix Config attribute frame format.
MFW associates the entity id to a config attribute instead of assigning
one entity id for all the config attributes.
This patch incorporates driver changes to link entity id to a config id
attribute.

Fixes: 0dabbe1bb3 ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:15:23 +01:00
Sudarsana Reddy Kalluru
9e54ba7c37 qed*: Fix size of config attribute dump.
Driver currently returns max-buf-size as size of the config attribute.
This patch incorporates changes to read this value from MFW (if available)
and provide it to the user. Also did a trivial clean up in this path.

Fixes: d44a3ced70 ("qede: Add support for reading the config id attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:15:23 +01:00
Colin Ian King
b93fb20f01 net: lmc: fix spelling mistake "runnin" -> "running"
There is a spelling mistake in the lmc_trace message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:11:59 +01:00
Dirk van der Merwe
44798eceea nfp: devlink: set unknown fw_load_policy
If the 'app_fw_from_flash' HWinfo key is invalid, set the
'fw_load_policy' devlink parameter value to unknown.

Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 15:10:05 +01:00
David S. Miller
c1b3ddf7c3 We have a number of changes, but things are settling down:
* a fix in the new 6 GHz channel support
  * a fix for recent minstrel (rate control) updates
    for an infinite loop
  * handle interface type changes better wrt. management frame
    registrations (for management frames sent to userspace)
  * add in-BSS RX time to survey information
  * handle HW rfkill properly if !CONFIG_RFKILL
  * send deauth on IBSS station expiry, to avoid state mismatches
  * handle deferred crypto tailroom updates in mac80211 better
    when device restart happens
  * fix a spectre-v1 - really a continuation of a previous patch
  * advertise NL80211_CMD_UPDATE_FT_IES as supported if so
  * add some missing parsing in VHT extended NSS support
  * support HE in mac80211_hwsim
  * let mac80211 drivers determine the max MTU themselves
 along with the usual cleanups etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl148l4ACgkQB8qZga/f
 l8TafQ//Yjunnxq49ClKMDxyKwxIBvLRAMr4D3QwaWAcWUpar1/V0Ft/5glnHtbZ
 7QptwbxVNUk/N68hYi8wlpMpvfzv/nShZD8QBNS1bk5E3Gng3yow03LhOx5iaYb2
 KJXS1GE4jwkMD7Xn65+eMeb8rt1vEj8LleX91cguilq+y5YbcNFsP1nil2RtQyBU
 cf5i8CBu4I5rTBoFaRvcz2xn+blqPSm2/piA+yXjzFp9vyVmhD+FjR5T482u48pj
 wi/1zersGVUzBNElnZOKg67XPir1fcJqCfLILr7okPItWuYXHdVHGfn+arhimK4W
 dyIpv1EfCe0lwKl4VTdhXt1GwhKvWCc2Ja7lz/RnDisGq9CYPJNfW7jFgR3tw4eg
 SccnUhnxRIgD1V2KDcvsRadPo+2YsBJBmC61JRX1K6L3zpHLbktDyzxvTwCeVQ9A
 TQp5bmQcKqDoq+/60JNHI6IxMbmX/vc2PC7dENGWUkem/JEmSWBB1wcL9gsRkhVi
 c4uHyvFeXJaIV7YFA36hWCfa0fr+UUYxfzxudRSvxq/tTpayqBKu6fr3Pvv0SqTj
 /BKkezoIdJntClhJv4PcDkZMva4uMCPtHCero9eICX5J+4AanD6caRNefX6L0PfF
 DtN1sscVOy9zY2fV4tqvn3IASmOE5yB/dxjtKkMYyNHkZsGiDI0=
 =HAuT
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2019-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
We have a number of changes, but things are settling down:
 * a fix in the new 6 GHz channel support
 * a fix for recent minstrel (rate control) updates
   for an infinite loop
 * handle interface type changes better wrt. management frame
   registrations (for management frames sent to userspace)
 * add in-BSS RX time to survey information
 * handle HW rfkill properly if !CONFIG_RFKILL
 * send deauth on IBSS station expiry, to avoid state mismatches
 * handle deferred crypto tailroom updates in mac80211 better
   when device restart happens
 * fix a spectre-v1 - really a continuation of a previous patch
 * advertise NL80211_CMD_UPDATE_FT_IES as supported if so
 * add some missing parsing in VHT extended NSS support
 * support HE in mac80211_hwsim
 * let mac80211 drivers determine the max MTU themselves
along with the usual cleanups etc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 14:57:17 +01:00
David S. Miller
747f3cf4bf mlx5-updates-2019-09-10
Misc build warnings cleanup for mlx5:
 
 1) Reduce stack usage in FW trace
 2) Fix addr's type in mlx5dr_icm_dm
 3) Fix rt's type in dr_action_create_reformat_action
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl14CvsACgkQSD+KveBX
 +j4ZxQgAhIRPGJpnA6fMD4QftO0d4Pp67/fG2aOfP3chwFPv1TcDPoc/Spbsdm0U
 lvytfD6gDLEAYQQ8fAcFJz+bkUnXQdq7fYMfTluZgGvVnQyE1rYa5/Dln1FRk01q
 4dk+s/WiOQyyTx5qpiaNFxh9oD3B3N2qtlXrKPDsFxYoVSrmgf8xXKGmWpwcLLhd
 Ee2lAiOU06LAukpN9oZcM6BKpmn32sv7K0RCdJHkwwJuk7oUq6KN+IpXESuG3DKm
 VOX/AENhCJ2kjEsNmi4lT6AQkznDQSXayl4Sr+3zxR0nS37kBX7Nu35hISSwOAaq
 bkfaLSYO7Om3bfFPsLZ6FD3P82iZLQ==
 =8qf/
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2019-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2019-09-10

Misc build warnings cleanup for mlx5:

1) Reduce stack usage in FW trace
2) Fix addr's type in mlx5dr_icm_dm
3) Fix rt's type in dr_action_create_reformat_action
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:26:34 +01:00
Jose Abreu
c9b10043d0 net: stmmac: ARP Offload for GMAC4+ Cores
Implement the ARP Offload feature in GMAC4 and GMAC5 cores.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:21:34 +01:00
Jose Abreu
e94e3f3b51 net: stmmac: Add support for VLAN Insertion Offload in GMAC4+
Adds support for TX VLAN Offload using descriptors based features
available in GMAC4/5.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:21:34 +01:00
Jose Abreu
1d982e93df net: stmmac: Add support for SA Insertion/Replacement in GMAC4+
Add the support for Source Address Insertion and Replacement in GMAC4
and GMAC5 cores. Two methods are supported: Descriptor based and
register based.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:21:34 +01:00
Jose Abreu
afdf26ab3c net: stmmac: xgmac: Reinitialize correctly a variable
'value' was being or'ed with a value from another register. This is a
typo and could cause new written value to be wrong. Fix it.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:21:34 +01:00
Jose Abreu
c1be0022df net: stmmac: Add VLAN HASH filtering support in GMAC4+
Adds the support for VLAN HASH Filtering in GMAC4/5 cores.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:21:34 +01:00
Jose Abreu
6fa9d691b9 net: stmmac: Prevent divide-by-zero
When RX Coalesce settings are set to all zero (which is a valid setting)
we will currently get a divide-by-zero error. Fix it.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:21:34 +01:00
Mao Wenan
49f6c90bf6 net: sonic: replace dev_kfree_skb in sonic_send_packet
sonic_send_packet will be processed in irq or non-irq
context, so it would better use dev_kfree_skb_any
instead of dev_kfree_skb.

Fixes: d9fb9f3842 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:14:01 +01:00
Navid Emamdoost
2507e6ab7a wimax: i2400: fix memory leak
In i2400m_op_rfkill_sw_toggle cmd buffer should be released along with
skb response.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11 09:10:13 +01:00