mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
3803d5e4d3
928592 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
3803d5e4d3 |
22 changesets, 2 for stable. Includes big performance improvement for large i/o when using multichannel, also includes DFS fixes
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAl7aelsACgkQiiy9cAdy T1HDmwv9Fj6OaXXx+btNvbB6xTWvCwMVKHwTPURMx+IjBYjJC65yPGkInPPkfUVo 7L9h55XCLwFohECleZJCkKOrJtnX1P8SsHtZck6QqjvUETJl/L3pAXpMMYACHLpg x4DE/NFkcW95J38s9Jtjhphq8ZGUhuDhaT+QeEd2Iq8HzAxk5ND47ZXkomMx1EEM ZsOrmJF+k2YQyDDpfhJeVF5iZDkbpASqA/TlLxxGH34IdAZIUB9qtGKADNLZ6YyT qpG601CSrEdl3tVY+SlRMHqwVTRhCViPD6Q3fMw8Xha436RIiWJJ4Rvn6bSP/ZQl PDPuSVRB2zmd70C/3ojXdku9+VfQLO52qkO3bf2IjgVJ3ARrxFxW7cb7bmYRqdyT WI5N1+8gETrIAK7aB3QKdmkcRFDtJD3wOTfBcgctuB8WrYrDvW2MNKkPbQdY5tnN xfp4f10Dg4d+/8knSytJrdKkDublU0kGbfLAa0oupjAzV6WB0qNt0TNGxE42L+ug iFSJOZxi =gCcP -----END PGP SIGNATURE----- Merge tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs updates from Steve French: "22 changesets, 2 for stable. Includes big performance improvement for large i/o when using multichannel, also includes DFS fixes" * tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits) cifs: update internal module version number cifs: multichannel: try to rebind when reconnecting a channel cifs: multichannel: use pointer for binding channel smb3: remove static checker warning cifs: multichannel: move channel selection above transport layer cifs: multichannel: always zero struct cifs_io_parms cifs: dump Security Type info in DebugData smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K smb3: default to minimum of two channels when multichannel specified cifs: multichannel: move channel selection in function cifs: fix minor typos in comments and log messages smb3: minor update to compression header definitions cifs: minor fix to two debug messages cifs: Standardize logging output smb3: Add new parm "nodelete" cifs: move some variables off the stack in smb2_ioctl_query_info cifs: reduce stack use in smb2_compound_op cifs: get rid of unused parameter in reconn_setup_dfs_targets() cifs: handle hostnames that resolve to same ip in failover cifs: set up next DFS target before generic_ip_connect() ... |
||
Linus Torvalds
|
9daa0a27a0 |
AFS Changes
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl7ZC5kACgkQ+7dXa6fL C2uv9A/+NKlTSXyv2ZuvtmXADelndcXJ+nC+3bwI7Jh43aa8uCCsAVYD0VE+dxor Ingj/LUJ2sjjp6RXCeeqqETXCoCVt0zK2g216+An7k84KJ+ms+MDa8dNN7l6280S 1jw4hnT0+g9Ln6elgqBroV980MJC2NGL0Eaete8zFO8UqYZy5w1ge0HfGck2l45U 2lr6egCWYSUPmtFKXJnLV8luwRvq7DzvTk9WrJu3kwOjaY1AQP1+1VpdhChJLrRc /4Ddy1On5IXiFrPi5OtHA422bfirUpIv2HbmI047W9uiZ05MiXwSvNS1qJLTa1AA T/SK88d3FCeSYw3olAne2kEl9uewvGByr98fDKFOcDHZj18abd9/VtUp33RXxYBy lN2wqlWP++LlZ4sMCbbvLXX8OB1tekQzWQC0vJ5rhRSgveOlhL9TLG2Y05xokFs+ AwK8zTlDIZ6Pa/JIHfp2E0ZhXEazWTSmP+d7NkgzF0iiORukvsmxjOVUZC4+UCqK rYN6goJ5g8qpejRv5NhfP6/olb1NK33f/F2QSSFfxv9zda4HNlayvcoSnFrdUEnt IfBhSKPkeDVWs1yse7glDuw19tHp94B9UYwJ46qfHngQPArgy+gp23d0cSy41Pr5 FRQ23eNvBWIP4srt1gSCBexSGA1h/ACji41CPTJbF2jg5uWFAUE= =YVwD -----END PGP SIGNATURE----- Merge tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS updates from David Howells: "There's some core VFS changes which affect a couple of filesystems: - Make the inode hash table RCU safe and providing some RCU-safe accessor functions. The search can then be done without taking the inode_hash_lock. Care must be taken because the object may be being deleted and no wait is made. - Allow iunique() to avoid taking the inode_hash_lock. - Allow AFS's callback processing to avoid taking the inode_hash_lock when using the inode table to find an inode to notify. - Improve Ext4's time updating. Konstantin Khlebnikov said "For now, I've plugged this issue with try-lock in ext4 lazy time update. This solution is much better." Then there's a set of changes to make a number of improvements to the AFS driver: - Improve callback (ie. third party change notification) processing by: (a) Relying more on the fact we're doing this under RCU and by using fewer locks. This makes use of the RCU-based inode searching outlined above. (b) Moving to keeping volumes in a tree indexed by volume ID rather than a flat list. (c) Making the server and volume records logically part of the cell. This means that a server record now points directly at the cell and the tree of volumes is there. This removes an N:M mapping table, simplifying things. - Improve keeping NAT or firewall channels open for the server callbacks to reach the client by actively polling the fileserver on a timed basis, instead of only doing it when we have an operation to process. - Improving detection of delayed or lost callbacks by including the parent directory in the list of file IDs to be queried when doing a bulk status fetch from lookup. We can then check to see if our copy of the directory has changed under us without us getting notified. - Determine aliasing of cells (such as a cell that is pointed to be a DNS alias). This allows us to avoid having ambiguity due to apparently different cells using the same volume and file servers. - Improve the fileserver rotation to do more probing when it detects that all of the addresses to a server are listed as non-responsive. It's possible that an address that previously stopped responding has become responsive again. Beyond that, lay some foundations for making some calls asynchronous: - Turn the fileserver cursor struct into a general operation struct and hang the parameters off of that rather than keeping them in local variables and hang results off of that rather than the call struct. - Implement some general operation handling code and simplify the callers of operations that affect a volume or a volume component (such as a file). Most of the operation is now done by core code. - Operations are supplied with a table of operations to issue different variants of RPCs and to manage the completion, where all the required data is held in the operation object, thereby allowing these to be called from a workqueue. - Put the standard "if (begin), while(select), call op, end" sequence into a canned function that just emulates the current behaviour for now. There are also some fixes interspersed: - Don't let the EACCES from ICMP6 mapping reach the user as such, since it's confusing as to whether it's a filesystem error. Convert it to EHOSTUNREACH. - Don't use the epoch value acquired through probing a server. If we have two servers with the same UUID but in different cells, it's hard to draw conclusions from them having different epoch values. - Don't interpret the argument to the CB.ProbeUuid RPC as a fileserver UUID and look up a fileserver from it. - Deal with servers in different cells having the same UUIDs. In the event that a CB.InitCallBackState3 RPC is received, we have to break the callback promises for every server record matching that UUID. - Don't let afs_statfs return values that go below 0. - Don't use running fileserver probe state to make server selection and address selection decisions on. Only make decisions on final state as the running state is cleared at the start of probing" Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part) * tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits) afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly afs: Show more a bit more server state in /proc/net/afs/servers afs: Don't use probe running state to make decisions outside probe code afs: Fix afs_statfs() to not let the values go below zero afs: Fix the by-UUID server tree to allow servers with the same UUID afs: Reorganise volume and server trees to be rooted on the cell afs: Add a tracepoint to track the lifetime of the afs_volume struct afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op afs: Detect cell aliases 2 - Cells with no root volumes afs: Detect cell aliases 1 - Cells with root volumes afs: Implement client support for the YFSVL.GetCellName RPC op afs: Retain more of the VLDB record for alias detection afs: Fix handling of CB.ProbeUuid cache manager op afs: Don't get epoch from a server because it may be ambiguous afs: Build an abstraction around an "operation" concept afs: Rename struct afs_fs_cursor to afs_operation afs: Remove the error argument from afs_protocol_error() afs: Set error flag rather than return error from file status decode afs: Make callback processing more efficient. afs: Show more information in /proc/net/afs/servers ... |
||
Linus Torvalds
|
0b166a57e6 |
A lot of bug fixes and cleanups for ext4, including:
* Fix performance problems found in dioread_nolock now that it is the default, caused by transaction leaks. * Clean up fiemap handling in ext4 * Clean up and refactor multiple block allocator (mballoc) code * Fix a problem with mballoc with a smaller file systems running out of blocks because they couldn't properly use blocks that had been reserved by inode preallocation. * Fixed a race in ext4_sync_parent() versus rename() * Simplify the error handling in the extent manipulation code * Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers. * Avoid passing an error pointer to brelse in ext4_xattr_set() * Fix race which could result to freeing an inode on the dirty last in data=journal mode. * Fix refcount handling if ext4_iget() fails * Fix a crash in generic/019 caused by a corrupted extent node -----BEGIN PGP SIGNATURE----- iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl7Ze8kACgkQ8vlZVpUN gaNChAf4xn0ytFSrweI/S2Sp05G/2L/ocZ2TZZk2ZdGeN1E+ABdSIv/zIF9zuFgZ /pY/C+fyEZWt4E3FlNO8gJzoEedkzMCMnUhSIfI+wZbcclyTOSNMJtnrnJKAEtVH HOvGZJmg357jy407RCGhZpJ773nwU2xhBTr5OFxvSf9mt/vzebxIOnw5D7HPlC1V Fgm6Du8q+tRrPsyjv1Yu4pUEVXMJ7qUcvt326AXVM3kCZO1Aa5GrURX0w3J4mzW1 tc1tKmtbLcVVYTo9CwHXhk/edbxrhAydSP2iACand3tK6IJuI6j9x+bBJnxXitnr vsxsfTYMG18+2SxrJ9LwmagqmrRq =HMTs -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A lot of bug fixes and cleanups for ext4, including: - Fix performance problems found in dioread_nolock now that it is the default, caused by transaction leaks. - Clean up fiemap handling in ext4 - Clean up and refactor multiple block allocator (mballoc) code - Fix a problem with mballoc with a smaller file systems running out of blocks because they couldn't properly use blocks that had been reserved by inode preallocation. - Fixed a race in ext4_sync_parent() versus rename() - Simplify the error handling in the extent manipulation code - Make sure all metadata I/O errors are felected to ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers. - Avoid passing an error pointer to brelse in ext4_xattr_set() - Fix race which could result to freeing an inode on the dirty last in data=journal mode. - Fix refcount handling if ext4_iget() fails - Fix a crash in generic/019 caused by a corrupted extent node" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits) ext4: avoid unnecessary transaction starts during writeback ext4: don't block for O_DIRECT if IOCB_NOWAIT is set ext4: remove the access_ok() check in ext4_ioctl_get_es_cache fs: remove the access_ok() check in ioctl_fiemap fs: handle FIEMAP_FLAG_SYNC in fiemap_prep fs: move fiemap range validation into the file systems instances iomap: fix the iomap_fiemap prototype fs: move the fiemap definitions out of fs.h fs: mark __generic_block_fiemap static ext4: remove the call to fiemap_check_flags in ext4_fiemap ext4: split _ext4_fiemap ext4: fix fiemap size checks for bitmap files ext4: fix EXT4_MAX_LOGICAL_BLOCK macro add comment for ext4_dir_entry_2 file_type member jbd2: avoid leaking transaction credits when unreserving handle ext4: drop ext4_journal_free_reserved() ext4: mballoc: use lock for checking free blocks while retrying ext4: mballoc: refactor ext4_mb_good_group() ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling ext4: mballoc: refactor ext4_mb_discard_preallocations() ... |
||
Linus Torvalds
|
b25c6644bf |
- Largest change for this cycle is the DM zoned target's metadata
version 2 feature that adds support for pairing regular block devices with a zoned device to ease performance impact associated with finite random zones of zoned device. Changes came in 3 batches: first prepared for and then added the ability to pair a single regular block device, second was a batch of fixes to improve zoned's reclaim heuristic, third removed the limitation of only adding a single additional regular block device to allow many devices. Testing has shown linear scaling as more devices are added. - Add new emulated block size (ebs) target that emulates a smaller logical_block_size than a block device supports. Primary use-case is to emulate "512e" devices that have 512 byte logical_block_size and 4KB physical_block_size. This is useful to some legacy applications otherwise wouldn't be ablee to be used on 4K devices because they depend on issuing IO in 512 byte granularity. - Add discard interfaces to DM bufio. First consumer of the interface is the dm-ebs target that makes heavy use of dm-bufio. - Fix DM crypt's block queue_limits stacking to not truncate logic_block_size. - Add Documentation for DM integrity's status line. - Switch DMDEBUG from a compile time config option to instead use dynamic debug via pr_debug. - Fix DM multipath target's hueristic for how it manages "queue_if_no_path" state internally. DM multipath now avoids disabling "queue_if_no_path" unless it is actually needed (e.g. in response to configure timeout or explicit "fail_if_no_path" message). This fixes reports of spurious -EIO being reported back to userspace application during fault tolerance testing with an NVMe backend. Added various dynamic DMDEBUG messages to assist with debugging queue_if_no_path in the future. - Add a new DM multipath "Historical Service Time" Path Selector. - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error. - Improve DM writecache target performance by using explicit cache flushing for target's single-threaded usecase and a small cleanup to remove unnecessary test in persistent_memory_claim. - Other small cleanups in DM core, dm-persistent-data, and DM integrity. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl7alrgTHHNuaXR6ZXJA cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWl42B/9sBd+j60emy4Bliu/f3pd7SEkFrSXv K2jXicRFx4E5kO0aLK+fX65cOiq2vvLsDh8c++0TLXcD9q7oK0qxK9c8TCPq29Cx W2J2dwdjyyqqbr3/FZHYYM9KLOl5rsxJLygXwhJhQ2Gny44L7nVACrAXNzXIHJ3r f8xr+GLdF/jz7WLj8bwEDo3Bf8wvxDvl2ijqj7EceOhTutNE8xHQ6UcTPqTtozJy sNM8UQNk1L43DBAvXfrKZ+yQ5DYAKdXKJpV9C8qv5DEGbaEikuMrHddgO4KlDdp4 VjPk9GSfPwGcJ4ecN8vgecZVGvh52ZU7OZ8qey/q0zqps74jeHTZQQyM =jRun -----END PGP SIGNATURE----- Merge tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - The largest change for this cycle is the DM zoned target's metadata version 2 feature that adds support for pairing regular block devices with a zoned device to ease the performance impact associated with finite random zones of zoned device. The changes came in three batches: the first prepared for and then added the ability to pair a single regular block device, the second was a batch of fixes to improve zoned's reclaim heuristic, and the third removed the limitation of only adding a single additional regular block device to allow many devices. Testing has shown linear scaling as more devices are added. - Add new emulated block size (ebs) target that emulates a smaller logical_block_size than a block device supports The primary use-case is to emulate "512e" devices that have 512 byte logical_block_size and 4KB physical_block_size. This is useful to some legacy applications that otherwise wouldn't be able to be used on 4K devices because they depend on issuing IO in 512 byte granularity. - Add discard interfaces to DM bufio. First consumer of the interface is the dm-ebs target that makes heavy use of dm-bufio. - Fix DM crypt's block queue_limits stacking to not truncate logic_block_size. - Add Documentation for DM integrity's status line. - Switch DMDEBUG from a compile time config option to instead use dynamic debug via pr_debug. - Fix DM multipath target's hueristic for how it manages "queue_if_no_path" state internally. DM multipath now avoids disabling "queue_if_no_path" unless it is actually needed (e.g. in response to configure timeout or explicit "fail_if_no_path" message). This fixes reports of spurious -EIO being reported back to userspace application during fault tolerance testing with an NVMe backend. Added various dynamic DMDEBUG messages to assist with debugging queue_if_no_path in the future. - Add a new DM multipath "Historical Service Time" Path Selector. - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error. - Improve DM writecache target performance by using explicit cache flushing for target's single-threaded usecase and a small cleanup to remove unnecessary test in persistent_memory_claim. - Other small cleanups in DM core, dm-persistent-data, and DM integrity. * tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits) dm crypt: avoid truncating the logical block size dm mpath: add DM device name to Failing/Reinstating path log messages dm mpath: enhance queue_if_no_path debugging dm mpath: restrict queue_if_no_path state machine dm mpath: simplify __must_push_back dm zoned: check superblock location dm zoned: prefer full zones for reclaim dm zoned: select reclaim zone based on device index dm zoned: allocate zone by device index dm zoned: support arbitrary number of devices dm zoned: move random and sequential zones into struct dmz_dev dm zoned: per-device reclaim dm zoned: add metadata pointer to struct dmz_dev dm zoned: add device pointer to struct dm_zone dm zoned: allocate temporary superblock for tertiary devices dm zoned: convert to xarray dm zoned: add a 'reserved' zone flag dm zoned: improve logging messages for reclaim dm zoned: avoid unnecessary device recalulation for secondary superblock dm zoned: add debugging message for reading superblocks ... |
||
Linus Torvalds
|
818dbde78e |
SCSI misc on 20200605
This series consists of the usual driver updates (qla2xxx, ufs, zfcp, target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of other minor updates. There are no major core changes in this series apart from a refactoring in scsi_lib.c. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXtq5QyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXyGAQCipTWx 7kHKHZBCVTU133bADt3+SstLrAm8PKZEXMnP9wEAzu4QkkW8URxEDRrpu7qk5gbA 9M/KyqvfRtTH7+BSK7M= =J6aO -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: :This series consists of the usual driver updates (qla2xxx, ufs, zfcp, target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of other minor updates. There are no major core changes in this series apart from a refactoring in scsi_lib.c" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes scsi: cxgb3i: Fix some leaks in init_act_open() scsi: ibmvscsi: Make some functions static scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim scsi: ufs: Fix WriteBooster flush during runtime suspend scsi: ufs: Fix index of attributes query for WriteBooster feature scsi: ufs: Allow WriteBooster on UFS 2.2 devices scsi: ufs: Remove unnecessary memset for dev_info scsi: ufs-qcom: Fix scheduling while atomic issue scsi: mpt3sas: Fix reply queue count in non RDPQ mode scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd() scsi: vhost: Notify TCM about the maximum sg entries supported per command scsi: qla2xxx: Remove return value from qla_nvme_ls() scsi: qla2xxx: Remove an unused function scsi: iscsi: Register sysfs for iscsi workqueue scsi: scsi_debug: Parser tables and code interaction scsi: core: Refactor scsi_mq_setup_tags function scsi: core: Fix incorrect usage of shost_for_each_device scsi: qla2xxx: Fix endianness annotations in source files ... |
||
Linus Torvalds
|
242b233198 |
RDMA 5.8 merge window pull request
A few large, long discussed works this time. The RNBD block driver has been posted for nearly two years now, and the removal of FMR has been a recurring discussion theme for a long time. The usual smattering of features and bug fixes. - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa - Continuing driver cleanups in bnxt_re, hns - Big cleanup of mlx5 QP creation flows - More consistent use of src port and flow label when LAG is used and a mlx5 implementation - Additional set of cleanups for IB CM - 'RNBD' network block driver and target. This is a network block RDMA device specific to ionos's cloud environment. It brings strong multipath and resiliency capabilities. - Accelerated IPoIB for HFI1 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds - Support for exchanging the new IBTA defiend ECE data during RDMA CM exchanges - Removal of the very old and insecure FMR interface from all ULPs and drivers. FRWR should be preferred for at least a decade now. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7X/IwACgkQOG33FX4g mxp2uw/+MI2S/aXqEBvZfTT8yrkAwqYezS0VeTDnwH/T6UlTMDhHVN/2Ji3tbbX3 FEKT1i2mnAL5RqUAL1lr9g4sG/bVozrpN46Ws5Lu9dTbIPLKTNPWDuLFQDUShKY7 OyMI/bRx6anGnsOy20iiBqnrQbrrZj5TECgnmrkAl62QFdcl7aBWe/yYjy4CT11N ub+aBXBREN1F1pc0HIjd2tI+8gnZc+mNm1LVVDRH9Capun/pI26qDNh7e6QwGyIo n8ItraC8znLwv/nsUoTE7/JRcsTEe6vJI26PQmczZfNJs/4O65G7fZg0eSBseZYi qKf7Uwtb3qW0R7jRUMEgFY4DKXVAA0G2ph40HXBuzOSsqlT6HqYMO2wgG8pJkrTc qAjoSJGzfAHIsjxzxKI8wKuufCddjCm30VWWU7EKeriI6h1J0uPVqKkQMfYBTkik 696eZSBycAVgwayOng3XaehiTxOL7qGMTjUpDjUR6UscbiPG919vP+QsbIUuBXdb YoddBQJdyGJiaCXv32ciJjo9bjPRRi/bII7Q5qzCNI2mi4ZVbudF4ffzyQvdHtNJ nGnpRXoPi7kMvUrKTMPWkFjj0R5/UsPszsA51zbxPydfgBe0Dlc2PrrIG8dlzYAp wbV0Lec+iJucKlt7EZtrjz1xOiOOaQt/5/cW1bWqL+wk2t6gAuY= =9zTe -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "A more active cycle than most of the recent past, with a few large, long discussed works this time. The RNBD block driver has been posted for nearly two years now, and flowing through RDMA due to it also introducing a new ULP. The removal of FMR has been a recurring discussion theme for a long time. And the usual smattering of features and bug fixes. Summary: - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa - Continuing driver cleanups in bnxt_re, hns - Big cleanup of mlx5 QP creation flows - More consistent use of src port and flow label when LAG is used and a mlx5 implementation - Additional set of cleanups for IB CM - 'RNBD' network block driver and target. This is a network block RDMA device specific to ionos's cloud environment. It brings strong multipath and resiliency capabilities. - Accelerated IPoIB for HFI1 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds - Support for exchanging the new IBTA defiend ECE data during RDMA CM exchanges - Removal of the very old and insecure FMR interface from all ULPs and drivers. FRWR should be preferred for at least a decade now" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits) RDMA/cm: Spurious WARNING triggered in cm_destroy_id() RDMA/mlx5: Return ECE DC support RDMA/mlx5: Don't rely on FW to set zeros in ECE response RDMA/mlx5: Return an error if copy_to_user fails IB/hfi1: Use free_netdev() in hfi1_netdev_free() RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr() RDMA/core: Move and rename trace_cm_id_create() IB/hfi1: Fix hfi1_netdev_rx_init() error handling RDMA: Remove 'max_map_per_fmr' RDMA: Remove 'max_fmr' RDMA/core: Remove FMR device ops RDMA/rdmavt: Remove FMR memory registration RDMA/mthca: Remove FMR support for memory registration RDMA/mlx4: Remove FMR support for memory registration RDMA/i40iw: Remove FMR leftovers RDMA/bnxt_re: Remove FMR leftovers RDMA/mlx5: Remove FMR leftovers RDMA/core: Remove FMR pool API RDMA/rds: Remove FMR support for memory registration RDMA/srp: Remove support for FMR memory registration ... |
||
Linus Torvalds
|
3f7e82379f |
This is the bulk of GPIO changes for the v5.8 kernel cycle.
Core changes: - A new GPIO aggregator driver has been merged: this can join a few select GPIO lines into a new aggregated GPIO chip. This can be used for security: a process can be granted access to only these lines, for example for industrial control. Another way to use this is to reexpose certain select lines to a virtual machine or container. - Warn if the gpio-line-names is too long in he DT parser core. - GPIO lines can now be looked up by line name in addition to being looked up by offset. New drivers: - A new generic regmap GPIO driver has been merged. Too many regmap drivers are starting to look like each other so we need to create some common ground and try to move drivers over to using that. - The F7188X driver now supports F81865. Driver improvements: - Large improvements to the PCA953x expander, get multiple lines and several cleanups. - Large improvements to the DesignWare DWAPB driver, and Sergey Semin has volunteered to maintain it. - PL061 can now be built as a module, this is part of a bigger effort to make the ARM platforms more modular. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl7ZarsACgkQQRCzN7AZ XXNRERAAvb/8YZX8yzfWqqKZ+aXxBOzn5LsbS15QjJz9W22wAZNhjNEHAtzd+xNJ BiyDt+BQLGqIr2aCKglVFOOYfa8PhTjrVA40ujRFUs3d8q8gr/RFpfGN3/w36h0W e3+QCHqe27Sk07wCB3RH7hzGcKhEUUt+A5sI0uX/nt9obx8IxdVPkafBYqCfdfWw qv9T/MU75ZYeLURg24AkgZR069gQeiDAEKVa8lYh9qKBhircFzBxM6Bg9Efn8tst E+6XIXNREslXBq5wtAosXI/t25ZpYtzDvkM5+/lm1jQyjMEh9wJyjmgu7tcRRZRK xxxOcUHybDJaCFogkA5iOLzyfcUbGZM/i5wQkUE3SPACypGfncjkYZPdY6Smljd1 SfBfl48xch2WW12f1/P04VwSVDNxNe9/RUqapZ5ZQfd2DJwyiZM6p+S85rrFKJse BvixFpGMY3J5h/lZUoaF93JaaQiWh2RK6WnsBvMVn2P9+WyPnwdUL2EX2RrYvdMR iH3jmRzlSeVQnest5c1k+i05O3D0fq3gJ+qvzT5gqxbFdRm6HZEhJNiVT56Y1V4n 30FJMbXg8mddxLvl7b1Hfi5E7PLFOP9Ygz7bHxAfogROGpWMMGgAlynxcSjqUesg YWoRPl0XmtMcsvVNJvLM/B3+Gxh78CsMzo4Nwh9FtgUMOG6B0Xw= =B5OK -----END PGP SIGNATURE----- Merge tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.8 kernel cycle. Core changes: - A new GPIO aggregator driver has been merged: this can join a few select GPIO lines into a new aggregated GPIO chip. This can be used for security: a process can be granted access to only these lines, for example for industrial control. Another way to use this is to reexpose certain select lines to a virtual machine or container. - Warn if the gpio-line-names is too long in he DT parser core. - GPIO lines can now be looked up by line name in addition to being looked up by offset. New drivers: - A new generic regmap GPIO driver has been merged. Too many regmap drivers are starting to look like each other so we need to create some common ground and try to move drivers over to using that. - The F7188X driver now supports F81865. Driver improvements: - Large improvements to the PCA953x expander, get multiple lines and several cleanups. - Large improvements to the DesignWare DWAPB driver, and Sergey Semin has volunteered to maintain it. - PL061 can now be built as a module, this is part of a bigger effort to make the ARM platforms more modular" * tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: pca953x: Drop unneeded ACPI_PTR() MAINTAINERS: Add gpio regmap section gpio: add a reusable generic gpio_chip using regmap gpiolib: Introduce gpiochip_irqchip_add_domain() gpio: gpiolib: Allow GPIO IRQs to lazy disable gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional gpio: rcar: Fix runtime PM imbalance on error gpio: pca935x: Allow IRQ support for driver built as a module gpio: pxa: Add COMPILE_TEST support dt-bindings: gpio: Add renesas,em-gio bindings MAINTAINERS: Fix file name for DesignWare GPIO DT schema gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt gpio: dwapb: avoid error message for optional IRQ gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration gpio: max730x: bring gpiochip_add_data after port config MAINTAINERS: Add GPIO Aggregator section docs: gpio: Add GPIO Aggregator documentation gpio: Add GPIO Aggregator gpiolib: Add support for GPIO lookup by line name ... |
||
Linus Torvalds
|
1f2dc7f5b6 |
IPMI update for 5.8
A few small fixes for things, nothing earth shattering. -corey -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAl7ZQ+UACgkQYfOMkJGb /4GJYg//dOy9/1GQ2jKuOGuS9K9dJdDVrnazR0tlHhBfQnhaNZRE6lWhwfpQSd/3 D1hHD7+DOU0ytFyx3lJN6bSA7jW+yw5ZRtDzATFZOKuPDWXaO+zsB+e/L+z2z2S7 Gw9RiJ6FzzEv3T33K6JoKU4Db4nGSCUbg5UK9gOrzPr4MFopAU1AiDLThPjsrrao Snt9Cyd1lLGfJuREkMWKYutsCYqB+BeMSfIe8HC+0vKxGmFX8T60A+bNtjfAtPx+ pQ4BkmaV/p9K5BSI3O4Io60qj4VTH+7TUKszwAOy8zjC+WG0mkLMFJgjO2uLiBbo UvkRMbxRB7v/VEDOjpS8z5cSVVBZ2GotnBFoMDgLbQIbu6R5Dz3gMgFRY3kx3wqe eHWAOh/XFXGul4h76rvTp8RDSoe4DXWbLLemsbWZrYq0tbyKyyhCgIcP9+Qh/8yC CrKVeVF0RvHpKpDY7uT5KFQ/PS7GFf5SyK9YdbQqlRS66rn5JCE3kAW+6aeUF4Vz ZdArNIEEZMZxwZr4wqHTF9ZL7C4+zw5Y3q7HKUAkXK9GRGdp1BYUvgzPtLKz7FWM 9JvuNRO4RhMWk0a0BkvwxlHl2odPe9mQiOjMB4ld/msukmSlileKn58JHHxAYlwK Qotqfaq5Iq6UKujdBV95Z6SOXDpjG/0QY9zrAziSTClm7tQML14= =nuZ5 -----END PGP SIGNATURE----- Merge tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "A few small fixes for things, nothing earth shattering" * tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi: ipmi:ssif: Remove dynamic platform device handing Try to load acpi_ipmi when an SSIF ACPI IPMI interface is added ipmi_si: Load acpi_ipmi when ACPI IPMI interface added ipmi:bt-bmc: Fix error handling and status check ipmi: Replace guid_copy() with import_guid() where it makes sense ipmi: use vzalloc instead of kmalloc for user creation ipmi:bt-bmc: Fix some format issue of the code ipmi:bt-bmc: Avoid unnecessary check |
||
Linus Torvalds
|
5a36f0f3f5 |
VFIO updates for v5.8-rc1
- Block accesses to disabled MMIO space (Alex Williamson) - VFIO device migration API (Kirti Wankhede) - type1 IOMMU dirty bitmap API and implementation (Kirti Wankhede) - PCI NULL capability masking (Alex Williamson) - Memory leak fixes (Qian Cai) - Reference leak fix (Qiushi Wu) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iQIcBAABAgAGBQJe19RZAAoJECObm247sIsiBTEP/1DsA/mL/eDR94Hkmz3y1qoX tkrIJuM5xo95uk6DsbXDikbjM2jpUmvDUiRilara25IceuVX/tKgTjgxNOWJd+h8 KHBoPM0bveILp+Hp6r6ZAEfhZLQ3P6A5XBTB6ql0ebveadyt13TP9Cr0jCf4Jxr2 2A7wZAexWN8P4YBXBqrW8X3ZF3V9rfWYOJ4eILRvEplJ/TkqsGJyKW8LKP45waUF wutN6yh7irnWQbbUO6hb/eTIO7usrNB2L4A5CJMSZIm8JZYYmFQOrn73Ry3bA3Pg U+v3xIRU5U1ed/1DeLs8lRDDxImmkSXbVga0N+e3qnKtDIBh7/i9yNT9hQjhG9Ba C3IQoOM0Fj03hK/UahNerN7FKYoj+JvtdSKeTSNFXwdp/JUSXjj1tLouxUBSFsgD P15CMPXF/U6rT3nQ7/3z3JFKft/iSf6ShjXeNJFqhwH+lKsj13kF2+py3+vgayl8 zLOqeLdRkQwXz73UStX+hrc7MmNYZVRxJ0uf3XXq3/CZ1gwiinIQqxDF3ry+pQ6w vXB8j5XJqsOguoAU7trTdvkKpfoJd4yY0D6aNN9F3JN8xkEBbfm6xZ7Hzur2JI6r iCxUHcS4XrXA/PRlTFupg8451CefuPJa2UkAWSdk182hO2R41l458Q6b7lIMqhOQ oP04S8VYvvDIw5JVnPWU =KSAE -----END PGP SIGNATURE----- Merge tag 'vfio-v5.8-rc1' of git://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - Block accesses to disabled MMIO space (Alex Williamson) - VFIO device migration API (Kirti Wankhede) - type1 IOMMU dirty bitmap API and implementation (Kirti Wankhede) - PCI NULL capability masking (Alex Williamson) - Memory leak fixes (Qian Cai) - Reference leak fix (Qiushi Wu) * tag 'vfio-v5.8-rc1' of git://github.com/awilliam/linux-vfio: vfio iommu: typecast corrections vfio iommu: Use shift operation for 64-bit integer division vfio/mdev: Fix reference count leak in add_mdev_supported_type vfio: Selective dirty page tracking if IOMMU backed device pins pages vfio iommu: Add migration capability to report supported features vfio iommu: Update UNMAP_DMA ioctl to get dirty bitmap before unmap vfio iommu: Implementation of ioctl for dirty pages tracking vfio iommu: Add ioctl definition for dirty pages tracking vfio iommu: Cache pgsize_bitmap in struct vfio_iommu vfio iommu: Remove atomicity of ref_count of pinned pages vfio: UAPI for migration interface for device state vfio/pci: fix memory leaks of eventfd ctx vfio/pci: fix memory leaks in alloc_perm_bits() vfio-pci: Mask cap zero vfio-pci: Invalidate mmaps and block MMIO access on disabled memory vfio-pci: Fault mmaps to enable vma tracking vfio/type1: Support faulting PFNMAP vmas |
||
Linus Torvalds
|
ac7b34218a |
Split the old READ_IMPLIES_EXEC workaround from executable PT_GNU_STACK
now that toolchains long support PT_GNU_STACK marking and there's no need anymore to force modern programs into having all its user mappings executable instead of only the stack and the PROT_EXEC ones. Disable that automatic READ_IMPLIES_EXEC forcing on x86-64 and arm64. Add tables documenting how READ_IMPLIES_EXEC is handled on x86-64, arm and arm64. By Kees Cook. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl7YFDIACgkQEsHwGGHe VUpnzxAAmXdODNOb1gGQvt+KJthkfkWh2A2R+tWxCRmFtjFTcS/eRxFfvGu2KmFY 2b2AcJzuJeGjs7WIvQU0pkR2p6STyzuSBBLj5J/OJR9FonQ4pPah38df4A0fOgI6 GJyJV9Ie7O2Ph1w2iLOeWBdmR90CnYuabxsfipgOL+sjHlEI0RqLSDgARRQsxTEj KM+JVAFD472KcUJnQKBVBOD1I1DOVBGu12r3y6chgsOtwshLNW/cO15cDgYrgnJZ OlR3EIUukCEEc1KQzUCihsypLuGfrmdq1MyPN8CME8gLfmOBsJyGRDhvmdbS+Wxh kAMYQ9BuNP/jMVtN950qV0qUtnZCeIPlj1sDb9STWz5fInLsXDSCS0eYi32yBFi+ 7yviVU95ml6Mda1Qd5axItTHFAjKIn0qfMZszkLOtUszIzNinCgH7t3ThoXeV223 BqrpntRwiGZVpXDdcp0QFYBsWSMchR47yuhL8pB4SWxQzgNzXqAEg2KFQU0XMDKp pdia9IzUozg/BrjG5cnRfZhq2lBra7fy3Dn6fw5+NR5vqhka0Wr8L6dyM1Rj74EU HPk5bRXgt0OIiIFPi4139ApY7k+8j2nbf12qUchue1ZVVKzbvK996FDXbrGgW3zD Wis1wglxB9urSUTmC1bMOeyOd+gebo3i/ACAjgSo+EbDN7qW0Qw= =2L7y -----END PGP SIGNATURE----- Merge tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull READ_IMPLIES_EXEC changes from Borislav Petkov: "Split the old READ_IMPLIES_EXEC workaround from executable PT_GNU_STACK now that toolchains long support PT_GNU_STACK marking and there's no need anymore to force modern programs into having all its user mappings executable instead of only the stack and the PROT_EXEC ones. Disable that automatic READ_IMPLIES_EXEC forcing on x86-64 and arm64. Add tables documenting how READ_IMPLIES_EXEC is handled on x86-64, arm and arm64. By Kees Cook" * tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/elf: Disable automatic READ_IMPLIES_EXEC for 64-bit address spaces arm32/64/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK arm32/64/elf: Add tables to document READ_IMPLIES_EXEC x86/elf: Disable automatic READ_IMPLIES_EXEC on 64-bit x86/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK x86/elf: Add table to document READ_IMPLIES_EXEC |
||
Linus Torvalds
|
7ae77150d9 |
powerpc updates for 5.8
- Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75 GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6 2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1 65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM G3PXIBOI0jRgRw== =o0WU -----END PGP SIGNATURE----- Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. * tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits) powerpc/pseries: Make vio and ibmebus initcalls pseries specific cxl: Remove dead Kconfig options powerpc: Add POWER10 architected mode powerpc/dt_cpu_ftrs: Add MMA feature powerpc/dt_cpu_ftrs: Enable Prefixed Instructions powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected powerpc: Add support for ISA v3.1 powerpc: Add new HWCAP bits powerpc/64s: Don't set FSCR bits in INIT_THREAD powerpc/64s: Save FSCR to init_task.thread.fscr after feature init powerpc/64s: Don't let DT CPU features set FSCR_DSCR powerpc/64s: Don't init FSCR_DSCR in __init_FSCR() powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations powerpc/module_64: Consolidate ftrace code powerpc/32: Disable KASAN with pages bigger than 16k powerpc/uaccess: Don't set KUEP by default on book3s/32 powerpc/uaccess: Don't set KUAP by default on book3s/32 powerpc/8xx: Reduce time spent in allow_user_access() and friends ... |
||
Linus Torvalds
|
084623e468 |
Modules updates for v5.8
Summary of modules changes for the 5.8 merge window: - Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has SHF_WRITE|SHF_EXECINSTR sections - Remove and clean up nested #ifdefs, as it makes code hard to read Signed-off-by: Jessica Yu <jeyu@kernel.org> -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEVrp26glSWYuDNrCUwEV+OM47wXIFAl7Z+qkQHGpleXVAa2Vy bmVsLm9yZwAKCRDARX44zjvBcm+vEACo/JelhaEDjjLzVuTBN4FQfXgBRbh6CGeF br7J1VtI9B0Coun0wfrDewwDieB2uHXQqivdC+KzNGXrBVhvFNLWuTTFcG7yce0K KZlbVREpiTRlenEa6A5EdIdvH0Ttg/+PFfkvOvvQOrbx5woZKptG49VdII9mhPuE LKnZk1xrK6jQLbOCPtUjyfB+eLqi0swhwstcfdIPUXsi2HtuLKmu7JPRpbW3Yz1v 0Y9xix7ByTSg+wsphiKgvDnoJ9TYC3bFlAwpw+A+tsOKE0pmyetWKvkJ/hH42W9D 7w6odSlG85d4ZExO2K8fHHsKmW2HgWx0cgLFf91sXCALqRYNjwTRkXH2OBXggLsz n3k8PmTRkDwS1oElrNG9E4LjKhjFbZZpP4kz+VlVe7YAsnlYpOBOcroTuaiuSV/A xmAP6mHgVAeUugwF5vHAPV4mwGJBLUVcvHENzge4jnyl/rSHsWE7hhwLnik9qkua cWINAVhBJpQvk3nrDr0dmUAXRJ7CXXtyPBbNh8ivvA4XeDNBLcYr8mcHPLpAoN4C xVcTRBxDXTRkw246zlQRcTySVpovtSv2C+IiaaHxA3j7lo4C1xhj6ihUIKz3Z1/A 70zvBxmg3zpMwZWiRGeasAIu69a0qvBh0AOfVTbHBrIp5RokibtdoyuOu7ZGOU9B Un1WJNrSYQ== =OlVv -----END PGP SIGNATURE----- Merge tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: - Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has SHF_WRITE|SHF_EXECINSTR sections - Remove and clean up nested #ifdefs, as it makes code hard to read * tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Harden STRICT_MODULE_RWX module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs |
||
Eric Biggers
|
64611a15ca |
dm crypt: avoid truncating the logical block size
queue_limits::logical_block_size got changed from unsigned short to
unsigned int, but it was forgotten to update crypt_io_hints() to use the
new type. Fix it.
Fixes:
|
||
Mike Snitzer
|
04867370ec |
dm mpath: add DM device name to Failing/Reinstating path log messages
When there are many DM multipath devices it really helps to have additional context for which DM device a failed or reinstated path is part of. Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mike Snitzer
|
4c3f48380f |
dm mpath: enhance queue_if_no_path debugging
Add more DMDEBUG that shows arguments passed and caller, and another that shows state of related flags at end of queue_if_no_path(). Also add queue_if_no_path DMDEBUG to multipath_resume(). Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mike Snitzer
|
553ec94cb4 |
dm mpath: restrict queue_if_no_path state machine
Do not allow saving disabled queue_if_no_path if already saved as enabled; implies multiple suspends (which shouldn't ever happen). Log if this unlikely scenario is ever triggered. Also, only write MPATHF_SAVED_QUEUE_IF_NO_PATH during presuspend or if "fail_if_no_path" message. MPATHF_SAVED_QUEUE_IF_NO_PATH is no longer always modified, e.g.: even if queue_if_no_path()'s save_old_value argument wasn't set. This just implies a bit tighter control over the management of MPATHF_SAVED_QUEUE_IF_NO_PATH. Side-effect is multipath_resume() doesn't reset MPATHF_QUEUE_IF_NO_PATH unless MPATHF_SAVED_QUEUE_IF_NO_PATH was set (during presuspend); and at that time the MPATHF_SAVED_QUEUE_IF_NO_PATH bit gets cleared. So MPATHF_SAVED_QUEUE_IF_NO_PATH's use is much more narrow in scope. Last, but not least, do _not_ disable queue_if_no_path during noflush suspend. There is no need/benefit to saving off queue_if_no_path via MPATHF_SAVED_QUEUE_IF_NO_PATH and clearing MPATHF_QUEUE_IF_NO_PATH for noflush suspend -- by avoiding this needless queue_if_no_path flag churn there is less potential for MPATHF_QUEUE_IF_NO_PATH to get lost. Which avoids potential for IOs to be errored back up to userspace during DM multipath's handling of path failures. That said, this last change papers over a reported issue concerning request-based dm-multipath's interaction with blk-mq, relative to suspend and resume: multipath_endio is being called _before_ multipath_resume. This should never happen if DM suspend's blk_mq_quiesce_queue() + dm_wait_for_completion() is genuinely waiting for all inflight blk-mq requests to complete. Similarly: drivers/md/dm.c:__dm_resume() clearly calls dm_table_resume_targets() _before_ dm_start_queue()'s blk_mq_unquiesce_queue() is called. If the queue isn't even restarted until after multipath_resume(); the BIG question that still needs answering is: how can multipath_end_io beat multipath_resume in a race!? Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mike Snitzer
|
a862e4e215 |
dm mpath: simplify __must_push_back
Remove micro-optimization that infers device is between presuspend and resume (was done purely to avoid call to dm_noflush_suspending, which isn't expensive anyway). Remove flags argument since they are no longer checked. And remove must_push_back_bio() since it was simply a call to __must_push_back(). Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
27d49ac1dd |
dm zoned: check superblock location
When specifying several devices the superblock location must be checked to ensure the devices are specified in the correct order. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
2094045fe5 |
dm zoned: prefer full zones for reclaim
Prefer full zones when selecting the next zone for reclaim. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
69875d443b |
dm zoned: select reclaim zone based on device index
per-device reclaim should select zones on that device only. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
22c1ef66c4 |
dm zoned: allocate zone by device index
When allocating a zone, pass in an indicator on which device the zone should be allocated; this increases performance for a multi-device setup because reclaim will now allocate zones on the device for which reclaim is running. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
4dba12881f |
dm zoned: support arbitrary number of devices
Remove the hard-coded limit of two devices and support an unlimited number of additional zoned devices. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
bd82fdabf1 |
dm zoned: move random and sequential zones into struct dmz_dev
Random and sequential zones should be part of the respective device structure to make arbitration between devices possible. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
f97809aec5 |
dm zoned: per-device reclaim
Instead of having one reclaim workqueue for the entire set we should be allocating a reclaim workqueue per device; doing so will reduce contention and should boost performance for a multi-device setup. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
18979819b5 |
dm zoned: add metadata pointer to struct dmz_dev
Add a metadata pointer within struct dmz_dev and use it as argument for blkdev_report_zones() instead of the metadata itself. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
8f22272af7 |
dm zoned: add device pointer to struct dm_zone
Add a pointer, to the containing device, within struct dm_zone and kill dmz_zone_to_dev(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
5d2c74f3dd |
dm zoned: allocate temporary superblock for tertiary devices
Checking the tertiary superblock just consists of validating UUIDs, crcs, and the generation number; it doesn't have contents which would be required during the actual operation. So allocate a temporary superblock when checking tertiary devices to avoid having to store it together with the 'real' superblocks. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
a92fbc446d |
dm zoned: convert to xarray
The zones array is getting really large, and large arrays tend to wreak havoc with the CPU caches. So convert it to xarray to become more cache friendly. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
aec67b4ffa |
dm zoned: add a 'reserved' zone flag
Instead of counting the number of reserved zones in dmz_free_zone(), mark the zone as 'reserved' during allocation and simplify dmz_free_zone(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
c3ff479dde |
dm zoned: improve logging messages for reclaim
Instead of just reporting the errno, add some more verbose debugging message in the reclaim path. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
1565929b87 |
dm zoned: avoid unnecessary device recalulation for secondary superblock
The secondary superblock must reside on the same device as the primary superblock, so there is no need to re-calculate the device. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Hannes Reinecke
|
35d0c96e42 |
dm zoned: add debugging message for reading superblocks
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mikulas Patocka
|
334b4fc172 |
dm ebs: use dm_bufio_forget_buffers
Use dm_bufio_forget_buffers instead of a block-by-block loop that calls dm_bufio_forget. dm_bufio_forget_buffers is faster than the loop because it searches for used buffers using rb-tree. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mikulas Patocka
|
33a180623b |
dm bufio: introduce forget_buffer_locked
Introduce a function forget_buffer_locked that forgets a range of buffers. It is more efficient than calling forget_buffer in a loop. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mikulas Patocka
|
88f878e588 |
dm bufio: clean up rbtree block ordering
dm-bufio uses unnatural ordering in the rb-tree - blocks with smaller numbers were put to the right node and blocks with bigger numbers were put to the left node. Reverse that logic so that it's natural. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Mikulas Patocka
|
40e9c5ac4e |
dm integrity: add status line documentation
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> |
||
Linus Torvalds
|
f4dd60a3d4 |
Misc changes:
- Unexport various PAT primitives - Unexport per-CPU tlbstate Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7Z+3cRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jgyxAAjPoXEzi9rqGHY6Eus37DNbzHtdQj4fqN 68h8T2tSnOMzETe3L/c4puxI50YFpMA0sFbzm8BfjCtucs0K7Tj4Sv8Aoap2b99A /bP+ySgHh2BMoI/tu9TiD8et+vttAGGwkXQhIOgeakZcYzpAY7oUNwc+CogkytbQ DaC8s9FL7RjCXCL91fvZ33C0ksg5J9ynFbRozEHOacHPrE3CbrqUwu+75PmS7nJC 13vatOxjdqNPQhVMg7waN1nHv7K06kph1wxWxYHoD0QwAPy1ecE84wLvg9gv5AqK BfUBmB34qRW21qbB5tQrMlGDS9tuV0vUB1fxUV7/iOKXQUH6viEG/7J7jm+YwXji U9S54UPj/TOp8fvYdS18sp6vI1gS3HKjd3LO3pPHWsyZVMJBoGuMConZRs3C31Cp WuwBU1gY+mFB5l4prt8WU8ocPvEnZkP00cCYNyzPk21tblfUwFbrmu3wcZxOkx3s ZhRO4KrhxtL7l/wDLuNtWShBL2c6Rz2tts58tr/fj/M+UscJK2MPKxPLCAb20QYZ qSkMa36+r8LkuMCyjpegEEmo4sw9yC6aLXFKfYu2ABki5o9AR4tavk+lwO+dad6T k0DJjGXLsG9sReR6hrfaNTk5h7ImiRFDVntnWAhgKhARRoloJJS4/RkzW+ylPbac mTuNNJDChUQ= =RXKK -----END PGP SIGNATURE----- Merge tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "Misc changes: - Unexport various PAT primitives - Unexport per-CPU tlbstate and uninline TLB helpers" * tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/tlb/uv: Add a forward declaration for struct flush_tlb_info x86/cpu: Export native_write_cr4() only when CONFIG_LKTDM=m x86/tlb: Restrict access to tlbstate xen/privcmd: Remove unneeded asm/tlb.h include x86/tlb: Move PCID helpers where they are used x86/tlb: Uninline nmi_uaccess_okay() x86/tlb: Move cr4_set_bits_and_update_boot() to the usage site x86/tlb: Move paravirt_tlb_remove_table() to the usage site x86/tlb: Move __flush_tlb_all() out of line x86/tlb: Move flush_tlb_others() out of line x86/tlb: Move __flush_tlb_one_kernel() out of line x86/tlb: Move __flush_tlb_one_user() out of line x86/tlb: Move __flush_tlb_global() out of line x86/tlb: Move __flush_tlb() out of line x86/alternatives: Move temporary_mm helpers into C x86/cr4: Sanitize CR4.PCE update x86/cpu: Uninline CR4 accessors x86/tlb: Uninline __get_current_cr3_fast() x86/mm: Use pgprotval_t in protval_4k_2_large() and protval_large_2_4k() x86/mm: Unexport __cachemode2pte_tbl ... |
||
Linus Torvalds
|
435faf5c21 |
RISC-V Patches for the 5.8 Merge Window, Part 1
* The remainder of the code necessary to support the Kendryte K210. * Support for building device trees into the kernel, as the K210 doesn't have a bootloader that provides one. * A K210 device tree and the associated defconfig update. * Support for skipping PMP initialization on systems that trap on PMP accesses rather than treating them as WARL. * Support for KGDB. * Improvements to text patching. * Some cleanups to the SiFive L2 cache driver. I may have a second part, but I wanted to get this out earlier rather than later as they've been ready to go for a while now. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl7YRtMTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYif+oD/4kaoQqmiw0VvyFjBlPT/TC7OPbaoXO 5WBegSEAl+oOq+fUtjHomzn6HaTW2cPNexsqC/KuGP1/QL0OQ23T5O18LaCmrGMd CvELeAcvu6G4kbRuHwF0U16hBI2A1xIYVUJ8qmbuHPpEwVel3AsP2RIjQ+bOvm7g fVTIrlzl1s1eTsOXdOJb3sFZtISHb7o3lHZmcplDva3N13x8E0FrjuoJhHv0f2mj kcmZcy3sr8luAkwAJmbqmdPuwYTlteMnucXdCUv/kG2SaPkBwU5TS+MN7No2ylXH v4vxjkuSyJ1db72pla6uUB/cYD+mh2YI4tjjvH93s3k4I/GZMCrqivXZW2QtxBdt na++GxK8e4FrBG+VCCCQvx2mqugpMFMDnZDt36N2BqwjOtEzO3W8GqjrKCovXtQf farlgAiuFNVcoo7VFdpNZE+N5elQa0GWf57csCqqMNN4J8JLaOgyS7ByozJ9b9/A 1x4g7kQANnMvYiYAeV+C2YfBcK6x8gHEPlWio1QZqirW5la34VUEWa18+rQeSRMz DArKPauCR1GuYZZVUkkDI8cXj0Gs5fTXsYmn+WsIpjFHnDYeYVe6Ocmczxyb3o3O lQwm7+drHlSmMvgrOlWJMrIUbdiomgelDU/iD4PiZzKozC52yKDS6A5gzoG6uZSM UleeAIeVG/TDCw== =keTq -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - The remainder of the code necessary to support the Kendryte K210: * Support for building device trees into the kernel, as the K210 doesn't have a bootloader that provides one * A K210 device tree and the associated defconfig update * Support for skipping PMP initialization on systems that trap on PMP accesses rather than treating them as WARL - Support for KGDB - Improvements to text patching - Some cleanups to the SiFive L2 cache driver * tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: soc: sifive: l2 cache: Mark l2_get_priv_group as static soc: sifive: l2 cache: Eliminate an unsigned zero compare warning riscv: Add support to determine no. of L2 cache way enabled riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure riscv: Use text_mutex instead of patch_lock riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation riscv: Remove the 'riscv_' prefix of function name riscv: Add SW single-step support for KDB riscv: Use the XML target descriptions to report 3 system registers riscv: Add KGDB support kgdb: Add kgdb_has_hit_break function RISC-V: Skip setting up PMPs on traps riscv: K210: Update defconfig riscv: K210: Add a built-in device tree riscv: Allow device trees to be built into the kernel |
||
Linus Torvalds
|
571d54ed91 |
Devicetree updates for v5.8:
- Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7ZYa8QHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw/zyD/42ZlYc2mKW5cHjGWr6vGAXG0KZq6AvHbeY setNPMhjKRKjWs/s3u0WVhEH7ZchzBhBi0PEVjqZCnxLTqkt+mdlelJVv3uYJVho 2ZJiIi5Iso+nNQ+wAEFG2EzhnLH35RXTdlECANnhGUht/JOJlgEqdjjxdj8CVyWG 0aGJRCRRGvzPiWAUyqcR/DpB+lz0ipaSNhxxECinT0OQ4OSheCJL811tQ5RGKZ24 z7C/W+iQbFKHu2Yf7+7vHWNCo6F3vW1LK36mfdwNYEvhg2edJRkW1kr9flkJCjCj Hhe2nIQmPQFJkeI/NkccowJRs5onwv3UIuPqOuAhx49XiI/a1aJKD0Md9ljeCJKd HOybAltDiYMHVBwWGtdednMbPNvHSlsjRby4PRGdmLBsOlgjaihosx/5Byx80JP3 CNNJVm712qgMh6VbG9FIJ0rCKmXO3LxsVraptosK271+uZqWeHB0+yJnsLXWje2M kY6YYVLtnc4j4eOeFgX7RQqagXdgZ3dc+MCVFVU6rq2WIiqLycEeiMLzr/WV78O5 wA0iX8Z7m+hkYPAEcbvt6Uhf0/KbeFlhb6dMGg2uE0ISgdCpXhpw1s4AeOQTKKuv vClzMPSXYkStD58CiYlUFqo01qoOvFVuPSLUa8ZbU5TMTYrwpcNX8FYXCEjz0tfc j7PbUy9YvA== =/MDi -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas * tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits) dt-bindings: clock: Add documentation for X1830 bindings. dt-bindings: mailbox: Convert imx mu to json-schema dt-bindings: power: Convert imx gpcv2 to json-schema dt-bindings: power: Convert imx gpc to json-schema dt-bindings: Merge gpio-usb-b-connector with usb-connector dt-bindings: timer: renesas: cmt: Convert to json-schema dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema dt-bindings: timer: Convert i.MX GPT to json-schema dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742 dt-bindings: serial: Add binding for UART pin swap dt-bindings: geni-se: Add interconnect binding for GENI QUP dt-bindings: geni-se: Convert QUP geni-se bindings to YAML dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix dt-bindings: input: touchscreen: edt-ft5x06: change reg property dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver dt-bindings: timer: renesas: mtu2: Convert to json-schema of/fdt: Remove redundant kbasename function call dt-bindings: clock: Convert i.MX1 clock to json-schema dt-bindings: clock: Convert i.MX21 clock to json-schema dt-bindings: clock: Convert i.MX25 clock to json-schema ... |
||
Linus Torvalds
|
9d71d3cd9e |
ARM: DT changes for v5.8
This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7ZWskACgkQmmx57+YA GNl60xAAtW8fmOerc1JvUSNZFN6PApVexhNUDPnc0Wytzsi67v9KKTz7CNxEaO6z o466PfCObhi8IlLa1NmJxhSRXjv84JnbUODkiLeWhpX3HWE4rWhVz+/+gukmIah4 H8Q3ehLyatgsGopXwBWShKoQmls2H4v9ETxKwx60Yj/HKqZeay7SLmLXbZ0SvFmZ 5kkROmXiFg5iWjtALuibJWCsG1o5Hsfl8JMiPsr3W+O2hTmm4AvJ3ESkCFeqqJ1M ccxTEaFhakM/U6xujQYG/mSbRox6mnxZukYzQLh+K0ccP7yvS5J90GOE3B7hNDFy qZiB6hfrX6Rmcr7k0nhAzTDOOfHF+DmikGTKh9BvpOenklhHu9AYQlZwh5gK3Svw G5T3mAKMd3YF4ywJHNUKtzVPp/Q786CXq08PdAY+tDiLo02UIR5WjOQ9at2JJKDG bfUQClyii+EtOqgOTmIPH2yUsYgVsbbv4F7SPk/c4BEn5od9a+bLoIne7yu8sy6M IdW8klUtoswzmH9lGlOjUic4pMrRVY+8gSgtETSF0sePoapcQUJg6gEEygvj4H36 BWFVHJK0WGQ2PWb3HHqRa20PJ92Jn65p1uK0eox4qkxd24KgpV6l2aAfx7FMUw47 vqxb59ogFsC+XIZ5OSG0fYfejnwgfTSJLodrJrk9UdvXb6nwo/Q= =17kt -----END PGP SIGNATURE----- Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ... |
||
Linus Torvalds
|
828f3e18e1 |
ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+ ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY= =44Jc -----END PGP SIGNATURE----- Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ... |
||
Linus Torvalds
|
298743c193 |
ARM: defconfig updates fopr 5.8
These are the usual updates to arm/arm64 defconfig files, enabling newly added drivers and addressing changes to Kconfig files. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvuAACgkQmmx57+YA GNnCpg//du9Y4XQOwpGGhhQAZ/SBXPXrG5OsJUxXgafwMO3YHNR4BnLlIZuhg79+ X993tjZzlAPNEjw0DsaWRnyIc6k9NbklDOXN8yeaYfts6PVEp1bDgMWaJv9W9Lib 7xSN3fhIP9kcAqX3CNPUfGluCIFbarBPv/SNKkPWc7wNFtSc6qKjWaVavBe/7ag3 jfCUpEd0u48KYFtc52M5zYZ4SJX/nGXj61H8DMVqeGEEiX1Rz2kJMSB2uqave9Bq SbHkacuvUmXeb+FUZfnEA3OFrQk0pqw+/hvlmln+0ViW00S8Y3B8sJcCEjVpphHC xMDCGejHyYCQFuDgHgywkaBk/SXLAFs3GUPH9lgx1OtHZgCHKxjRbhggGBdibbJh zAAShgeVZILSfe/JcEt6WyzsdBxFwuTxDZPoW3LHeRZsUpXzD0MZ34SEEXXkm+oz 4E/X5qxVGnAF3Z2q2jj3GJzkUI26J2TfB9PazlLMvU6btanV7AzZfa8/tXJo3KE8 BR7ub9F7eSF6FMGS/PAOsfpXC70oauPx+h2M5hRkCsZ71w2AWvi7TW3ahDu/WAIX hqWvKX//eKNqd2oI+fWiSUOfvXy4nhE2kC9vB6dg6L8vS+1Z25F2MsV9eMJIfL7I xHSqIEDixL6nQpZmHxUYkSwot7/90Ve2IYUi2qJr29EtSJXUWso= =ma5a -----END PGP SIGNATURE----- Merge tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM defconfig updates from Arnd Bergmann: "These are the usual updates to arm/arm64 defconfig files, enabling newly added drivers and addressing changes to Kconfig files" * tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support arm64: defconfig: enable Qualcomm IPA and RMNet modules arm64: defconfig: Add LEDS_TRIGGER_TIMER arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc arm64: defconfig: Remove QCOM_GLINK_SSR ARM: multi_v7_defconfig: Enable r8a7742 SoC ARM: shmobile: defconfig: Enable r8a7742 SoC arm64: defconfig: enable meson gx audio as module arm64: defconfig: Enable SM8250 GCC driver ARM: defconfig: u8500: Enable new drivers for ux500 arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default arm64: configs: Enable sun50i cpufreq nvmem ARM: shmobile: defconfig: Refresh for v5.7-rc1 ARM: defconfig: u8500: Enable new drivers for samsung-golden ARM: configs: sunxi: Add sun8i analog codec arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers ARM: configs: at91: sama5: enable MCP16502 regulator ARM: configs: at91: sama5: enable SAMA5D2_PIOBU ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules ... |
||
Linus Torvalds
|
694b5a5d31 |
ARM: SoC changes for v5.8
One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvmAACgkQmmx57+YA GNk4vRAAs3TxlwLAUk5dknAi+UstlviNPG/ys6mViFuLqktPyhkA/v6nFOBI5Ldf 8xAsaSk3+oAX3Dd7aTaudl5WMFWFtzT5xA4gEI7CBZrBaAL0BVns1JfnVxpPRIcF B09Sb3wv7++E/+AxYcoVLWd5wkc9tlMesrIV5FPHHasOp3rRjVI0cExXnXzqJU8M TbwrWEOczZNVAm2q4Eh1ttbuSIvPd3s4NMnI755MRSQ7u/rYFSPf6Ay8/eFTqx1e 0SMWHRmrGeP6yhLy7+Li0x0jsK3ReZ9SkLXp3iEZ9huKbBTHIPBUeBB1RMnCYGe+ M2OL+9ySSe9UI9sjvsLGPDAnJaZI/UDUOVhatZCTvYB7CZY5nYNrYp+heYFONWm6 Up3e1t2iGPbgs8/1y78a9YPxAdsW0iavRtjVUYb+nwX+savYZgSBATA1pZqLc317 5FAGmTh//OLKYBSjfAxu9H8aInJPZA595lUiPHEQujzZH5Xz0QNtv4dapeNL2I4g LO20PMvuEgmwlwj/Npnwdl0UQK3ztoeR2upCrk91VwtNWGiOWTzCMT/OkYAAjKuo QYMGu3UvbbTCHPsIdrUz8gZ2T3VnJoeE3ldny2QbNAtVdpH/F8htJcilrBbyv1vI IKB1oogf5zfUwXVwZRxCfI9s5hELUlAKMGTtNcybzdsKpN5xtTo= =gzCp -----END PGP SIGNATURE----- Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ... |
||
Nick Desaulniers
|
587f17018a |
Kconfig: add config option for asm goto w/ outputs
This allows C code to make use of compilers with support for output variables along the fallthrough path via preprocessor define: CONFIG_CC_HAS_ASM_GOTO_OUTPUT [ This is not used anywhere yet, and currently released compilers don't support this yet, but it's coming, and I have some local experimental patches to take advantage of it when it does - Linus ] Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
886d7de631 |
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton: - More MM work. 100ish more to go. Mike Rapoport's "mm: remove __ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue - Various other little subsystems * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) lib/ubsan.c: fix gcc-10 warnings tools/testing/selftests/vm: remove duplicate headers selftests: vm: pkeys: fix multilib builds for x86 selftests: vm: pkeys: use the correct page size on powerpc selftests/vm/pkeys: override access right definitions on powerpc selftests/vm/pkeys: test correct behaviour of pkey-0 selftests/vm/pkeys: introduce a sub-page allocator selftests/vm/pkeys: detect write violation on a mapped access-denied-key page selftests/vm/pkeys: associate key on a mapped page and detect write violation selftests/vm/pkeys: associate key on a mapped page and detect access violation selftests/vm/pkeys: improve checks to determine pkey support selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust() selftests/vm/pkeys: fix number of reserved powerpc pkeys selftests/vm/pkeys: introduce powerpc support selftests/vm/pkeys: introduce generic pkey abstractions selftests: vm: pkeys: use the correct huge page size selftests/vm/pkeys: fix alloc_random_pkey() to make it really random selftests/vm/pkeys: fix assertion in pkey_disable_set/clear() selftests/vm/pkeys: fix pkey_disable_clear() selftests: vm: pkeys: add helpers for pkey bits ... |
||
Arnd Bergmann
|
469cbd0161 |
lib/ubsan.c: fix gcc-10 warnings
The latest compiler expects slightly different function prototypes for the ubsan helpers: lib/ubsan.c:192:6: error: conflicting types for built-in function '__ubsan_handle_add_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 192 | void __ubsan_handle_add_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:200:6: error: conflicting types for built-in function '__ubsan_handle_sub_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 200 | void __ubsan_handle_sub_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:207:6: error: conflicting types for built-in function '__ubsan_handle_mul_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 207 | void __ubsan_handle_mul_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:214:6: error: conflicting types for built-in function '__ubsan_handle_negate_overflow'; expected 'void(void *, void *)' [-Werror=builtin-declaration-mismatch] 214 | void __ubsan_handle_negate_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/ubsan.c:234:6: error: conflicting types for built-in function '__ubsan_handle_divrem_overflow'; expected 'void(void *, void *, void *)' [-Werror=builtin-declaration-mismatch] 234 | void __ubsan_handle_divrem_overflow(struct overflow_data *data, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change the Linux implementation to match these, using a local typed pointer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Julien Grall <julien.grall@arm.com> Link: http://lkml.kernel.org/r/20200429185948.4189600-1-arnd@arndb.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jagadeesh Pagadala
|
2792d488a2 |
tools/testing/selftests/vm: remove duplicate headers
Code cleanup: Remove duplicate headers which are included twice. Signed-off-by: Jagadeesh Pagadala <jagdsh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Link: http://lkml.kernel.org/r/1587278984-18847-1-git-send-email-jagdsh.linux@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sandipan Das
|
f21fda8f64 |
selftests: vm: pkeys: fix multilib builds for x86
This ensures that both 32-bit and 64-bit binaries are generated when this is built on a x86_64 system. Most of the changes have been borrowed from tools/testing/selftests/x86/Makefile. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/0326a442214d7a1b970d38296e63df3b217f5912.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sandipan Das
|
473c3cc86c |
selftests: vm: pkeys: use the correct page size on powerpc
Both 4K and 64K pages are supported on powerpc. Parts of the selftest code perform alignment computations based on the PAGE_SIZE macro which is currently hardcoded to 64K for powerpc. This causes some test failures on kernels configured with 4K page size. In some cases, we need to enforce function alignment on page size. Since this can only be done at build time, 64K is used as the alignment factor as that also ensures 4K alignment. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/5dcdfbf3353acdc90f315172e800b49f5ca21299.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ram Pai
|
e9506394a1 |
selftests/vm/pkeys: override access right definitions on powerpc
Some platforms hardcode the x86 values for PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE such as those in: /usr/include/bits/mman-shared.h. This overrides the definitions with correct values for powerpc. [sandipan@linux.ibm.com: fix powerpc access right definitions] Link: http://lkml.kernel.org/r/1ba86fd8a94f38131cfe2d9f277001dd1ad1d34e.1588959697.git.sandipan@linux.ibm.com Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/f6eb38cb3a1e12eb2cdc9da6300bc5a5dfba0db9.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |